Pages

Search

Microsoft Word - headers and Footers in Word

Microsoft Word - headers and Footers in Word

headers and Footers in Word

Posted: 31 Oct 2014 03:07 PM PDT

How do I suppress headers on certain pages.  I'm writing a book and I don't want the page headers on Chapter title pages.  How do I stop this?

Cannot open Word docs as email attachments

Posted: 31 Oct 2014 02:33 PM PDT

I have searched other questions in this community and no one has yet posted the exact problem.

I have a new Surface Pro 3 running Windows 8.1 and use MS Office 2010. Updates are done automatically to both.

When someone sends me a Word document as an email attachment, it will not open. I get the error message "MS Word has stopped working". If I try again, Word wants to open in Safe Mode, and shows the unopened document in the side bar. I have found that if I open the doc using Wordpad, there is no problem. I then save it in RTF mode, and can then open it in Word.

The email clients I use are Outlook Web Access and Mozilla Thunderbird. Neither will open Word attachments.

I usually use Mozilla Firefox (again, up-to-date) to access Outlook. I tried using Internet Explorer, and it made no difference.

I just ran the repair mode for Office 2010 and that did not help, either.

Interestingly, I have NO problem opening up Word docs on my wife's laptop, which also has Office 2010 but is running Windows 7.

Logic would lead me to the conclusion that there is some sort of incompatibility with Win 8.1 and Word 2010 when the Word document has been sent as an email attachment.

Any ideas as to how this can be fixed? And please, do not tell me to upgrade to Office 2013!

Questions about indexing

Posted: 31 Oct 2014 01:29 PM PDT

1. After looking at the XE field codes, I conclude that there is no way to have Word put, e.g. "cats, continued" above index columns for one header that run to several pages. This makes it hard to know where you are in a large index in which one heading may go on for more than one column or page.

2. I also conclude that there is no way to have additional indentation after the first of several lines of page numbers in a given heading or subheading.

I would like, for example, the extra indent before "82." This would make the index easier to read.

cats

   siamese, 33, 44, 55-60,

      82, 104

ctrl-p doesn't invoke print menu

Posted: 31 Oct 2014 12:48 PM PDT

Anyway to get this back?  I've websearched this, but only postings I've found have to do with hotkeys in the File menu or in the Quick Access menu.  I don't have Print in the Quick Access menu, nor do I want it, and the File menu is not a menu (it is an entire panel without any indication of hot keys of any sort).

Cursor Problem in Word 2010

Posted: 31 Oct 2014 12:35 PM PDT

My cursor in Word 2010 flickers constantly back and forth between an arrow and a rotating blue circle.  How can I stop this?

How do I make a new style show up in the styles list?

Posted: 31 Oct 2014 12:35 PM PDT

I made 

I made a new list style and it shows up in the manage style box, but how do I make it show up on the styles list drop-down so I can select it?

Thanks

Need help with Picture Content Control and not printing when no picture present

Posted: 31 Oct 2014 12:18 PM PDT

I can't seem to figure out how to keep a Picture Content Control box (specifically the shading of the box element) from printing when no picture is present. I am using the Picture content control within a table cell in a Word form. Could anyone suggest a way to keep the content control from printing or showing that there's an element in the cell when no picture has been added?

Thanks in advance!

Jason

Content control mirroring entry

Posted: 31 Oct 2014 11:17 AM PDT

I have a Word document with content controls that have lists. The lists have different words in them. When either control is updated by choosing one of the words in the list for the corresponding control the other control gets updated with the same information. Somehow these are bound together but I cannot figure out how.

This was a template downloaded from Office.com.

Thank you.

SAVING FILES TO DESKTOP

Posted: 31 Oct 2014 10:10 AM PDT

HOW DO I  SAVE FILES TO DESKTOP - DESKTOP NO LONGER APPEARS ON THE RIGHT HANE LIST WHEN  i CLICK "SAVE TO" iS IT BECAUSE i DOWNLOADED dROPBOX?

Commenting on Word Document that was converted from PDF

Posted: 31 Oct 2014 09:13 AM PDT

I converted a PDF document to Word. I wished to be able to edit/comment on this document. But when I bring the document up, I am unable to "paint" a word. The cursor is just a "crossed arrow", that only allows me to move the doc around.

Problem with launching Word 2007

Posted: 31 Oct 2014 08:36 AM PDT

I Have a genuine copy of Enterprise 2007 suite, and moved up to Windows 7 after a HDD crash in March (also genuine copy)

All worked well until about a month ago

Now when I try to launch Word it takes me to the User Account Control asking me if I want to allow Word to make changes to my computer

If I agree, then word launches OK

I cannot double click on a word document to open Wod and the document any longer

I get the same User Control question, but when i agree I get an error message saying that "there was a problem sending the command to the program"

Word is the only program in the suite that is affected

I have tried "repair" and have also uninstalled and reinstalled from the original disc, but the problem persists

I'm getting a bit narked now!!

How to ask Track Changes to stop tracking the "Field Code Changed"?

Posted: 31 Oct 2014 08:15 AM PDT

Dear all,

In "Track Changes Option", I am able to ask Word 2010 to stop tracking formatting changes (So that only insertion/ deletion will be shown as mark-up).

However, I found that when there are "embedded Link Objects" being inserted in a Word documents, Track Changes will also tract the "Field Code changed".

Wondering are there any ways for Track Changes to stop tracking the "Field code changed", so that I can track only Insertion/ deletion in my document?

Many thanks!

Creating a Table of References in Table Format

Posted: 31 Oct 2014 08:01 AM PDT

I want to create a reference section to my document that is in the form of a table rather that just a list.

Using the concept of a Table of Contents as an example, I would like it to look like this:.

Style 1

Style 2

Style 3 Style 6
Style 4 Style 7
Style 5 Style 8

I have tried to do this as a ToC but cant seem to work out how I could format it in this way.

Is it possibel to do this or, if not, does anyone know of an alternative method

Delay saving documents

Posted: 31 Oct 2014 07:09 AM PDT

Using my Surface for business I have project files and sub folders.

When I try to save a document or Email there is a long delay before it asks me where I want to save it to.

Whatever application I am using (Excel, Word etc) goes into non responsive mode for about 30secs to a minute before asking where I want to save it to.

Any help would be appreciated.

How can I search for a specific file in word for Ipad?

Posted: 31 Oct 2014 05:38 AM PDT

How do I find a specific file within word for ipad.  I see the search icon within a document but cannot find how to search all of my doc files and folders for a specific word/name.

How do I access the practice files for MOS 2013 Study Guide for Microsoft Word Expert Parts 1 & 2 (by John Pierce)?

Posted: 31 Oct 2014 05:33 AM PDT

 I have the electronic version.  I have tried looking for the "download" link on the Microsoft Pressstore website but I don't see it.  I have sent several emails to various microsoft-press accounts but I have not received a response.  HELP!!!!

Word 2010 fields not retaining values when document is closed/opened.

Posted: 31 Oct 2014 03:20 AM PDT

Hi,

A colleague has asked for help with an issue they are having with documents containing fields.

It is a fairly basic invoice doc with fields for entering numerical values, with another field with a formula that totals these values and calculates/applies VAT.

The 'total' field only updates when the doc is printed, which I believe is normal behavior. However after re-opening the doc after saving/closing the 'total' value has reverted to zero. Printing again will update the field correctly, but again it will not retain it if the doc is closed.

This document is protected from editing, I think to prevent other people tinkering and users can only enter values into the fields.

The protection is applied with a password - could this be causing the issue? Unfortunately the person who knows the password is away at the moment so I cannot test this myself >.<

Another colleague has a similar invoice doc that is protected from editing (with no password/blank password) and this works as we would expect i.e. updated field values are retained after saving/re-opening.

Does anyone have any ideas?

TIA

Greg

Microsoft Won't Open Anything

Posted: 30 Oct 2014 11:00 PM PDT

I am a college student so using things such as Microsoft Word, PowerPoint and Excel are crucial for me. However, the last couple of times I tried to open one of these things on my laptop, they would not open. Instead, I would get this pop up saying:

"Something went wrong

We couldn't start your program. Please try starting it again."

Now, I am very bad with technology so when I went to control panel to try and find what the problem was, I just got lost and even more confused.

Is there any way to get back into using Word and my other items quickly? I really don't want to have to go to multiple websites on how to fix this. A step by step solution is what I need and even then I am not sure I could follow those correctly. Also, what can I do to prevent this from happening again? I live in a college dorm so I'm limited to the WiFi on campus.

Finally, I also do not have a clue of what half of the computer terms mean. I am very sorry but the best detail I can give you is that I have a black HP laptop I bought from Best Buy last year. It's start menu is that weird square thing with the four boxes in the lower left hand corner of my computer screen. However, I do believe I have the 2013 Microsoft Word (but I'm not positive) because when I bought the computer, it came with all of that stuff already on it (Word, PowerPoint, Excel, Note, etc). 

MS Word 2013 intermittently scrolls up or down and freezes requiring closing program with Task Manager and losing text

Posted: 30 Oct 2014 10:09 PM PDT

For no reason in particular all of a sudden while I'm typing a document MS Word 2013, the document will starting scrolling either all the way up to the beginning of the document or scrolling down to the end of the document. The program is then frozen and the only way to resolve the problem is to go to the Task Manager close the MS Word Program and then restart and restore the document through document recovery. Unfortunately sometimes quite a bit of text hasn't been saved requiring me to retype.

This is extremely frustrating and since I'm a transcriptionist who types all day long. I lose time and money having to deal with this annoying problem.

I am using Windows 8.1 on a relatively new (2013) Toshiba  laptop with Intel Core i5.

Determine which data source a merge main doc is looking for

Posted: 30 Oct 2014 04:29 PM PDT

I am trying to use a Word merge file that my predecessor created.  It cannot find its data source--but I know the source is here somewhere. How can I determine what file the main Word document is looking for?  Obviously there is some code in the main doc that tells it which data file to access!  I've done my homework-- scouring Help and Support as well as other forums and the internet (multiple times over the years!) has turned up no way to access that information.

Font and line spacing changes when document is opened on another computer

Posted: 30 Oct 2014 03:52 PM PDT

Split from this thread.

I'm having a problem where other users are opening a document that I have been editing and the font and line spacing isn't the same. But when I open it everything looks correct. The document is on a shared drive. The font and line spacing have to be a particular way for the document.

Global address list edit - Microsoft Exchange

Global address list edit - Microsoft Exchange

Global address list edit

Posted: 05 Oct 2007 11:53 AM PDT

Is it possible to block an OU or prevent the GAL query from reading from an
OU?

That would solve my problem..

Cactus


"Cactus Johnson" <info> wrote in message
news:%phx.gbl... 

How to change neame format in Exch. 2003

Posted: 05 Oct 2007 11:43 AM PDT

Yes, I can do a mass change but will admodify let me reverse the dispaly
names on all acct(s)?

Clayton



"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Distribution lists with restricted access receiving unauthorized m

Posted: 04 Oct 2007 12:08 PM PDT

So if I understand this correctly, when I create a distribution list and
specify that only 3 people in my exchange organization and 3 people from the
company next door can send to the list, what it really means is that 3 people
in my exchange organization plus everybody in the world outside my
organization can send mail to that list - is that correct ?
--
Steve Paul


"Ed Crowley [MVP]" wrote:
 

Exchange 2003: The e-mail account does not exist at the organization" when sending to ONE INTERNAL user

Posted: 04 Oct 2007 08:30 AM PDT

Hi,

I dont think an address conflict in the GAL is likely. If you try and
add an email address in AD which already exists, you are prevented
from doing so for that very reason. Several users have reported
problems in sending to the problem user's mailbox and I feel it is a
little unlikely that they would all have problem contacts. Please not
that this is an occasional problem. The issue about "No transport
provider was available for delivery to this
recipient" is far more frequent (daily).


Im afraid I konw very little about the legacyExchangeDN attribute. How
do I find this out? I do not believe any of her email addresses have
changed in teh last few months.

Thanks,

C


On 4 Oct, 16:43, "Susan" <nospam.com> wrote: 

local delivery delays in Exchange 2007

Posted: 04 Oct 2007 04:00 AM PDT

We use a combination of Symantic Corp Edition 10.1 and Symantec Av for MS
Exchange. We only have one mailbox information store and public store. I'm
new to 2007 so I am looking for queue monitoring tools...

I am not real suspicious of the AV system as simple one or two line text
messages can be delayed and they contain nothing the AV system should care
about. I hate to turn it off as I can't reproduce the problem on demand and
it would be hard to know if things are different for perhaps several days.

"Andy David {MVP}" wrote:
 

Underliverable: FW: #5.1.1

Posted: 03 Oct 2007 10:03 AM PDT

Hi Ed, thx so much for your post. How do I verify to see which user(s)
granted deleted user as delegate/alternate recipient?? Thx again in advance.
-
TKM
"Ed Crowley [MVP]" wrote:
 

Multiple copy of the same email

Posted: 03 Oct 2007 09:33 AM PDT

I check the header of each two same email and the only difference in the
header is that:

header on email#1
X-OriginalArrivalTime: 03 Oct 2007 07:01:28.0226 (UTC)
FILETIME=[383E5020:01C8058B]

header on email#2
X-OriginalArrivalTime: 03 Oct 2007 14:31:33.0862 (UTC)
FILETIME=[18DB5860:01C805CA]

Your conclusion?

"Ed Crowley [MVP]" wrote:
 

Standby Backup Server?

Posted: 03 Oct 2007 01:07 AM PDT

John,

thank you very much - this seems to be exactly what I was looking for!

Gerd
"John Oliver, Jr. [MVP]" <com> schrieb im Newsbeitrag
news:com... 

Exchange 2007 32bit evalution on windows 2008

Posted: 02 Oct 2007 07:09 AM PDT

PowerShell is included in Windows 2008; you need to install it manually:

ServerManagerCmd -i PowerShell

See also, http://technet.microsoft.com/en-us/library/bb691354.aspx for
details on installing the various Windows 2008 pre-reqs.

Hope this helps.

"Kasper Bøggild" <dk> wrote in message
news:com... 

Set Owner of Resource Mailboxe in Exchange 2000

Posted: 02 Oct 2007 05:19 AM PDT

I don't know how you'd do that without writing custom code.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Assaf" <com> wrote in message
news:googlegroups.com... 

Opening encrypted emails

Posted: 01 Oct 2007 08:50 AM PDT

Your explanation seems right to me too, but I'm hardly an expert on this PKI
stuff, so I really don't know. It makes my brain hurt. Sorry.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Auschten" <microsoft.com> wrote in message
news:com... 

Pop error in Server

Posted: 01 Oct 2007 05:18 AM PDT

Hi,

I don't know what that was but just error in the event viewer and there are
so much of them. I shall post this to the sbs forum. Thank you for the
direction.



"Lanwench [MVP - Exchange]"
<donotsendme.unsolicitedmailatyahoo.com> wrote in message
news:OWA$phx.gbl... 

Exchange 2000 store size

Posted: 30 Sep 2007 04:25 PM PDT

I think I may have answered this m'self.

---from a related kb---
For example, a mailbox may appear to use only 250 MB of space in Exchange
System Manager, but the total space that the mailbox uses may be 450 MB.
This difference occurs because the 200 MB of space that the Priv.stm file
uses does not appear in Exchange System Manager.
---endquote---

I need them to clear out more. So the question changes. Is there a way to
identify who has significant content in the .stm? and which items they are?
I understand that the .stm is 'internet' rather than 'local' (basic).

"SuperGumby [SBS MVP]" <nellie> wrote in message
news:phx.gbl... 

Removing an Exchange server with Failed Hardware

Posted: 27 Sep 2007 04:25 PM PDT

Thanks. I appreciate it.

Problems downloading mail using pop3

Posted: 26 Sep 2007 10:43 PM PDT

Thanks! I'll give it a try.

"Ed Crowley [MVP]" wrote:
 

Problem with using OWA and Sharepoint with NTLM authentication

Posted: 26 Sep 2007 10:15 PM PDT

Hi

I had this issue and i resolved by adding OWA into trusted zones (IE) and
changed the custom level on client for User Authentication to automatic logo
only in intranet zone (last custom)


There is nothing you can do at the server level (i maybe wrong)

J

"TiCaL" <microsoft.com> wrote in message
news:com... 

Exch2k3 migration question

Posted: 26 Sep 2007 07:08 PM PDT

There are issues of message replyability, users' Contacts and Personal
Address Book entries, manager-delegate relationships, and more. If you're
small, you might find these issues to be manageable.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"msadexchman" <com> wrote in message
news:com... 

SSL CSR and OWA

Posted: 26 Sep 2007 01:50 PM PDT

You're on Exchange Server 2003 - are you using the same cert for TLS on
IMAP, POP3, SMTP?
- If OWA is the only thing you're using this for, and you don't want any
interruptions - try to create a new cert request using the Certificates
snap-in (with scope set to Local Computer when you add the snap-in to a MMC
console) first.
- If that doesn't work, and you need to remove the cert/binding
temporarily - it'll be for the time it takes you to create a new cert
request and then re-bind the existing cert to the OWA site.
- I would try this on a test box/VM first.

--
Bharat Suneja
MVP - Exchange
www.zenprise.com
NEW blog location:
exchangepedia.com/blog
----------------------------------------------


"totoro" <microsoft.com> wrote in message
news:com... 

NDR 4.4.7

Posted: 26 Sep 2007 09:40 AM PDT

You can do an nslookup for the MX record(s) of the destination mail
server(s) and telnet to those.

Any errors in the event log?

"Bruce D" <microsoft.com> wrote in message
news:com... 

Mailbox handling for disable/remove user in sbs 2003

Posted: 26 Sep 2007 03:24 AM PDT

Hi Andy,

Thanks and will look into outlook and exmerge.

Many thanks,

Kind regards,

"Andy David {MVP}" <com> wrote in message
news:com... 

MSExchangeMGMT service is Stopped

Posted: 25 Sep 2007 08:16 AM PDT

No, you'll be fine. You're welcome to disable the service until somebody
screams about it! It's likely nobody will.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Smiley" <com> wrote in message
news:fdg5a5$si3$2$demon.co.uk... 

owa does not work on http

Posted: 25 Sep 2007 02:32 AM PDT

I found the problem, read and write was not enabled on the default website,
its working fine now. Thanks for the help.

"Mark Arnold [MVP]" wrote:
 

OWA goes down with no errors

Posted: 24 Sep 2007 08:30 AM PDT

Phil <microsoft.com> wrote: 

So this is a single server network?

 

Hosting your own mail is fine. Hosting your public website on your Exchange
server (and a domain controller, yet!) is running with scissors, and the
fact that you're a small company is irrelevant.

In fact, small companies tend not to have as much money to invest in the
kind of hardware that might help them recover from an attack (a spare
server) or a good firewall. Seriously, outsource that - and llock down your
network. Just because you haven't gotten into a bad motorcycle accident yet
doesn't mean you shouldn't be wearing a helmet.

Since port 80 is one of the more frequently scanned for/targeted ports on
the internet, it's entirely possible that your hosting has something to do
with this.

Does an IISRESET fix the problem?

Can you test by blocking inbound traffic on 80 for a little while
to see if the problem recurs?
 

This is a reply :)

IP Allow list provider vs IP Allow list

Posted: 22 Sep 2007 02:15 PM PDT

"Luka Manojlovic" <manojlovic.net> wrote:
 

I'm afraid I won't be of much help with that. I don't use Exchange as
a spam filter or a connection control point. While I can see the
benefit of using a static (or even a dynamic) IP address block, the
use of an IP address to whitelist messages from /every/ check doesn't
appeal to me. I've /had/ to do that, but I don't think I've got more
than 20 such IP whitelistings. I don't mind whitelisting IPs from some
subset of the checks we use, but I'd much rather see the sender
correct the problem.

--
Rich Matheisen
MCSE+I, Exchange MVP
MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm
Don't send mail to this address mailto:com
Or to these, either: mailto:com mailto:com mailto:com

An open source program to convert DRM'ed WMA files to others (MP3& OGG)? - Forums Linux

An open source program to convert DRM'ed WMA files to others (MP3& OGG)? - Forums Linux

An open source program to convert DRM'ed WMA files to others (MP3& OGG)?

Posted: 28 Jul 2007 05:16 PM PDT

Chris Cox wrote: 

One easier way:

mplayer -ao pcm:file=myfile.wav myfile.wma

This may require the w32codecs... not sure...

Then you can reencode to mp3.

There may be an even easier way..... I couldn't
figure out how to get mplayer to send the data
to stdout.. if so you could reencode via a pipe.

System slowdown/freeze

Posted: 28 Jul 2007 10:05 AM PDT

On Sat, 28 Jul 2007 17:05:38 -0000, zeno
<com> wrote: 
I think you mean 6.10. Ubuntu version numbers are year.month, with two
releases per year. In 2006 they released 6.06 (Dapper Drake) and 6.10
(Edgy Eft).

--
Kleeneness is next to Godelness.

Spin up time

Posted: 27 Jul 2007 12:23 AM PDT

The Natural Philosopher wrote: 
That is a pretty good answer, actually.
I have another approach if you have multiple SCSI disks.
I have six, and they are set to start only when the SCSI controller starts
them. When booting Linux it starts one at a time and you can see that
happening on the screen. When it starts each SCSI controller, it pauses as
it goes through the list of 16-1 devices on each SCSI controller and you can
time them with a stopwatch. Two of my SCSI hard drives have a little relay
or something in them so you can hear this click. The other SCSI hard drives
are small (17+ Gigabytes) and they make no sound at all.

It may be that the manufacturer of your hard drive(s) publishes this
information and if so, you could just look it up. It is not very long (5
seconds or so IIRC).

--
.~. Jean-David Beyer Registered Linux User 85642.
/V\ PGP-Key: 9A2FC99A Registered Machine 241939.
/( )\ Shrewsbury, New Jersey http://counter.li.org
^^-^^ 07:45:01 up 4 days, 29 min, 2 users, load average: 4.49, 4.35, 4.15

fetchmail and courier-imap

Posted: 26 Jul 2007 08:50 PM PDT

thank you, I will try.


"Roger Blake" <com> a écrit dans le message de news:
netaxs.com... 

installation from hd?

Posted: 26 Jul 2007 03:46 AM PDT

On Jul 27, 1:22 am, HASM <net> wrote: 

Would you recommend installing FC7 from a live CD or a hard
drive? 

secure ftp with vsftpd without (remote) shell login

Posted: 26 Jul 2007 12:41 AM PDT




:-
http://www.arabmsyar.com/arabzwaj/welcome/viewforum.php?f=75
:-
http://www.arabmsyar.com/arabzwaj/welcome/viewforum.php?f=76


-
http://www.arabzwaj.com/welcome/viewtopic.php?t=2278
( )
http://www.arabzwaj.com/welcome/viewtopic.php?t=2279



http://www.arabzwaj.com/welcome/viewtopic.php?t=2270

http://www.arabzwaj.com/welcome/viewtopic.php?t=2272
( )

http://www.arabzwaj.com/welcome/viewtopic.php?t=2271
( )
http://www.arabzwaj.com/welcome/viewtopic.php?t=2273

http://www.arabzwaj.com/welcome/viewtopic.php?t=2264
»FIFA 2007
http://www.arabzwaj.com/welcome/viewtopic.php?t=2266


www.arabzwaj.com







www.arabzwaj.com
for marrige and friend ship
www.arabzwaj.com

www.arabzwaj.com

www.arabzwaj.com





the best web site formarrige and frindship www.arabzwaj.com










:-
www.arabzwaj.com/welcome enter here and watch y arab girls


www.arabwazaef.com/arab


http://www.arabzwaj.com/welcome/viewtopic.php?t=1892

http://www.arabzwaj.com/welcome/viewtopic.php?t=900
**** ****
http://www.arabzwaj.com/welcome/viewtopic.php?t=1894
( )
http://www.arabzwaj.com/welcome/viewtopic.php?t=1880

http://www.arabzwaj.com/welcome/viewtopic.php?t=1879





a + +
http://www.arabzwaj.com/welcome/viewtopic.php?t=1956


http://www.arabzwaj.com/welcome/viewtopic.php?p=10201#10201
....
http://www.arabzwaj.com/welcome/viewtopic.php?p=10210#10210
000000 0
http://www.arabzwaj.com/welcome/viewtopic.php?t=686
..!
http://www.arabzwaj.com/welcome/viewtopic.php?p=10203#10203

http://www.arabzwaj.com/welcome/viewtopic.php?p=10207#10207

http://www.arabzwaj.com/welcome/viewtopic.php?p=10211#10211

.... !!!
http://www.arabzwaj.com/welcome/viewtopic.php?p=10200#10200

http://www.arabzwaj.com/welcome/viewtopic.php?p=10212#10212
..... !!
http://www.arabzwaj.com/welcome/viewtopic.php?p=10208#10208


:-
http://www.arabzwaj.com/welcome/viewtopic.php?p=10095#10095
5000
http://www.arabzwaj.com/welcome/viewtopic.php?t=1952&sid=15f0596ebc9c205da75f65eb7 23025a2

http://www.arabzwaj.com/welcome/viewtopic.php?t=1587&start=0&postdays=0&postorder= asc&highlight=

http://www.arabzwaj.com/welcome/viewtopic.php?p=10213#10213


http://www.arabzwaj.com/welcome/viewtopic.php?p=10209#10209

http://www.arabzwaj.com/welcome/viewtopic.php?p=10205#10205
.......
http://www.arabzwaj.com/welcome/viewtopic.php?p=10206#10206



:-
http://www.arabzwaj.com/welcome/viewtopic.php?p=9855#9855


000000 0
http://www.arabzwaj.com/welcome/viewtopic.php?t=686

http://www.arabzwaj.com/welcome/viewtopic.php?t=1873

http://www.arabzwaj.com/welcome/viewtopic.php?t=124


:-
http://www.arabzwaj.com/welcome/viewtopic.php?p=9855#9855

( )
http://www.arabzwaj.com/welcome/viewtopic.php?p=9736#9736
Windows Live Messenger 8.0
http://www.arabzwaj.com/welcome/viewtopic.php?t=1834
( )
http://www.arabzwaj.com/welcome/viewtopic.php?t=1831

http://www.arabzwaj.com/welcome/viewtopic.php?t=1812

http://www.arabzwaj.com/welcome/posting.php?mode=editpost&p=9729


... ..
http://www.arabzwaj.com/welcome/viewtopic.php?t=1796



http://www.arabzwaj.com/welcome/viewtopic.php?t=1789

http://www.arabzwaj.com/welcome/viewtopic.php?t=1568&highlight=%E3%E1%DD
3
http://www.arabzwaj.com/welcome/viewtopic.php?t=1830


http://www.arabzwaj.com/welcome/viewtopic.php?t=1790

http://www.arabzwaj.com/welcome/viewtopic.php?t=102


00,
http://www.arabzwaj.com/welcome/viewtopic.php?p=9739#9739
( )
http://www.arabzwaj.com/welcome/viewtopic.php?p=9740#9740
2038
http://www.arabzwaj.com/welcome/viewtopic.php?t=1837

http://www.arabzwaj.com/welcome/viewtopic.php?t=1824

http://www.arabzwaj.com/welcome/viewtopic.php?t=1821

http://www.arabzwaj.com/welcome/viewtopic.php?t=1768
!!
http://www.arabzwaj.com/welcome/viewtopic.php?t=1751

http://www.arabzwaj.com/welcome/viewtopic.php?t=1838

http://www.arabzwaj.com/welcome/viewforum.php?f=11

http://www.arabzwaj.com/welcome/viewtopic.php?t=234





www.arabzwaj.com

:com


hide ip
+ :
:-
http://d.turboupload.com/d/839284/157615851606157516051580hide.rar.html
:-
http://www.megaupload.com/?d=BBCGC4J0







the best web site formarrige and frindship www.arabzwaj.com




















Sabyon anyone?

Posted: 25 Jul 2007 01:35 PM PDT

John wrote: 

You can also take a look at the liveCD list for help
in choosing a liveCD to try out.

http://livecdlist.com/

Have fun.

How can I stop the cursor blinking?

Posted: 24 Jul 2007 02:42 PM PDT

On Wed, 25 Jul 2007 01:19:13 +0200, Dawid Michalczyk <com>
wrote:
 

Yes, I see what you mean, certainly there is an option in Configure
Konsole available on the right-click menu which allows you to switch
off the cursor blinking. It is called "Blinking Cursor" and appears
under the "General" tab of the dialog.

Thing is, I mean the what in Windows is referred to as the System
Caret. This is the cursor that comes up when for example you type-in
a URL into your favourite browser, or directly type in a file name
into an Open dialog box of your text editor, or even the straight-bar
thing that lets you type text into your OpenOffice.org word processor.

In Windows this is treated like a System Resource and as such is
controlled by the System. When you write a Windows app you have to
"request" the system cursor be present in your application if you
want it, so as to prevent any other Windows application from using it
at the same time. Being new to Linux I don't know how the same thing
is treated the same way so that why I was posting here in the hope
that one of you guys could help me out.

Thanks a lot!! ;-)
Pablo.

All RTOS (linux Based ) Other than RT-Linux

Posted: 23 Jul 2007 11:54 PM PDT

The Natural Philosopher wrote: 
.... 
 

I guess I have been confused by the necessity to have the BIOS reflect new
hardware before linux notices it is there.

--
As pf July 2007, the Iraq war is costing the same as three nuclear aircraft
carriers every month. Never again question the cost of a carrier.
-- The Iron Webmaster, 3841
nizkor http://www.giwersworld.org/nizkook/nizkook.phtml
Israel says no extermination
http://www.giwersworld.org/holo3/holo-survivors.phtml a13

Linux XP Freespire Edition and Ubuntu Version 7.04

Posted: 23 Jul 2007 02:43 PM PDT

On Jul 23, 6:18 pm, Bit Twister <com> wrote: 

Thanks, BT.

My printer just ran out ink and I don't have a CD writer so I'm off to
hunt up some resources.

Quote:
Just think of linux as going from win 3.1 to XP.
Trying to scare me off, huh!?? :D

Thanks.

Barb

Newbie needs help with Grub!

Posted: 23 Jul 2007 11:57 AM PDT

com wrote: 

Windoze wants to believe that he owns the system, i.e., think he is on
drive 0. On my Dell, Windows is on the older IDE drive hda0. When I
installed a new SATA drive, it became drive 0 (no override option in the
BIOS). This is where I installed Open Suse 10.0 and subsequently
Mandriva 2007 spring.

Here is my GRUB menu that works for all 3 (note that I share the swap
drive between Suse and Mandriva).

Note the comments around the windows stanza. They might give you some
good clues, since it appears that you have windows on the 2nd drive.

Pardon some odd line breaks - that is my newsreader client.

# Modified by YaST2. Last modification on Sat Jan 6 04:13:43 UTC 2007

color white/blue black/light-gray
default 0
timeout 8
gfxmenu (hd0,0)/message

###Don't change this comment - YaST2 identifier: Original name: linux###
title SUSE LINUX 10.0
root (hd0,0)
kernel /vmlinuz root=/dev/sda11 vga=788 selinux=0
resume=/dev/sda2 splash=silent showopts
initrd /initrd

title Mandriva 2007 Spring
root (hd0,11)
kernel (hd0,11)/boot/vmlinuz root=/dev/sda12 resume=/dev/sda2 vga=788
initrd (hd0,11)/boot/initrd.img

###Don't change this comment - YaST2 identifier: Original name: windows###
# I edited this to try to make it work
# lots of problems to get this to work. Here is a suggestion that
somebody else got on the newsgroup
# finally figured it out by reading an on-line GRUB manual plus what I
saw here
# the first new drive is the SATA drive, which is linux.
# Windows is on the 2nd partition of the 2nd drive, which give us hd1,1
in the chainloader line
title Windows
rootnoverify (hd0,0)
map (hd1) (hd0)
map (hd0) (hd1)
makeactive
chainloader (hd1,1)+1

When did the output of "ls -l" command change?

Posted: 23 Jul 2007 04:43 AM PDT

On Monday 23 Jul 2007 23:55, linux-tek in soothing anger wrote:
 
I believe com

ne...
--
Registered Linux User # 125653 (http://counter.li.org)
Certified: 75% , 42% of which is tard.
http://www.thespark.com/test
Now accepting personal mail for GMail invites.

Installing Linux on a Computer Running XP on 2nd Partition of External Drive

Posted: 20 Jul 2007 08:12 PM PDT

com wrote: 

Maybe you want to try topological linux. Its a distro which runs
completely in your XP-Partition. How to install you can find here:

http://sourceforge.net/project/shownotes.php?group_id=32217&release_id=323422

HTH Martin

How do you get bash to pass all the parameters to a program.

Posted: 18 Jul 2007 01:25 PM PDT

On Wed, 18 Jul 2007 20:25:40 -0000, voipfc
<com> wrote: 
"$@" (notice the double quotes).


--
I hate mankind, for I think myself one of the best of them, and I know
how bad I am.
-- Samuel Johnson

Starting from scratch

Posted: 18 Jul 2007 02:43 AM PDT

On Wed, 18 Jul 2007, Mr. N. Marsall wrote:
 

That's way too much swap space.

An old rule of thumb was that the swap size should be the double of the
RAM. That's probably too much these days, but I certainly wouldn't exceed
the size it suggests.

On the other hand, too much swap doesn't hurt; it's just a waste of disk
space.

--
Yves Bellefeuille
<ca>

Anyone know how to play shockwave file in Fedora 7 (FC 7)?

Posted: 17 Jul 2007 02:46 AM PDT

Wish my translation is accurate.

Original (http://big5.yesky.com/b5/os.yesky.com/lin/
407/2588907.shtml)

Testing platform: kernel 2.2.16 REDHAT 7, KDE 2.X, Netscape, Mozilla
and Konqueror
Result: Pass

Step
1) download flash_Linux.tar.gz (suggested to use Netscape browser)
to /usr/src
2) Decompress flash_Linux.tar.gz

cd /usr/src
gunzip < flash_Linux.tar.gz | tar -xvf -

Notes: flash_Linux.tar.gz contain 2 files (libflashplayer.so and
ShockwaveFlash.class)

Netscape 4.75 Linux

1) logon as root
2) copy the above files to /usr/lib/netscape/plugins (Netscape 4.75
plugin folder).
If not find the folder, search it by "find / -name plugins -print
| grep -i netscape"

cp /usr/src/flash_Linux/libflashplayer.so /usr/lib/netscape/
plugins
cp /usr/src/flash_Linux/ShockwaveFlash.class /usr/lib/netscape/
plugins

3) Restart browser

Microsoft Word - Word template with different margins on first page?

Microsoft Word - Word template with different margins on first page?

Word template with different margins on first page?

Posted: 30 Oct 2014 12:35 PM PDT

We have a printed letterhead and continuation paper for letters and I am trying to set up an MS Word template that has appropriate margins.

The first page is easy, I need a 6cm margin top and a 5cm margin bottom and that works fine.  However, on the second page I'd like the margins to be 'normal' as we have continuation paper where normal margins will be fine.  If I set the margins the same it looks odd, like I'm wasting a lot of space.

How can I create a template with the margins set appropriately on the page but where when writing a letter and it naturally flows onto page 2, the margins become normal?  Is that possible?

How do I open the Normal.dotm file?

Posted: 30 Oct 2014 11:09 AM PDT

Hi. I want to stop the Navigation pane opening by default and see in someone's reply that I can do this in the Normal.dotm file. Where do I open the Normal.dotm file from? thanks, Dollo

Problem: "Microsoft Word has stopped working"

Posted: 30 Oct 2014 10:05 AM PDT

Problem:
"Microsoft Word has stopped working"

1. When the Word document, I click the "View" and "Macros" and "View Macros" I get the message "Microsoft Word has stopped working" - followed by the message "Close the program".
So, I can not open the macros!

2. When the Excel document, I click the "View" and "Macros" and "View Macros" I get a blank "Macro" table.
So, I can not open the macros!

How to regain pre-made macros?

thank you

Converting linked document objects to INCLUDETEXT fields

Posted: 30 Oct 2014 08:27 AM PDT

I have hundreds of small Word 2010 documents (i.e. one sentence in length) inserted in a larger "container" document. I inserted them using the command Insert | Object | Create From File. They are considered as "Linked Document Objects" when I right-click them.

 

For various reasons, a decision was subsequently made to replace all these linked document objects with INCLUDETEXT fields. Is there a way to convert the existing objects programmatically instead of deleting them and inserting the INCLUDETEXT fields one by one?

Thank you for any help you can provide!

Hiding date stamp in track changes, Word 2013

Posted: 30 Oct 2014 07:37 AM PDT

Hi there,

Is there any way I can hide the date/time stamp that appears in the balloons/comments/changes I make in Track Changes in Word 2013? 

Thanks!

How to create a new tab position in Word Web App

Posted: 30 Oct 2014 07:24 AM PDT

Hi,

How to create a new tab position in a Word Web App document in order to use the tab key? (Now nothing is happening when I click on the tab key.) Or is not possible?

Thanks!

"Keep with Next" and "Keep Lines Together" -- What's the General Rule?

Posted: 30 Oct 2014 07:11 AM PDT

I'm back.

So, I've got my document formatted using a mutli-level list linked to Header styles.

All of my Header styles have "Keep with Next" and "Keep Lines Together" checked -- I assume that is the default.

I find that I keep getting large empty spaces in my pages which I can only avoid by un-clicking "Keep with Next" or "Keep Lines Together" in the trailing paragraph.

This is simple enough, but I'm curious whether most people leave these boxes unchecked when the create a new template or document?   Or does it just depend on the document?

Is there an easier way to avoid the empty spaces that I'm not finding?

Thank you.

markup in microsoft word page 2007

Posted: 30 Oct 2014 07:07 AM PDT

markup error on right side

Form Protection

Posted: 30 Oct 2014 06:09 AM PDT

How do I add "LOCK" and "UNLOCK" buttons to my MS Word toolbar. As of now, I have to go through eight steps to change the dates on forms that I send to clients. I want to unlock to change info on the forms then lock to protect the form from being changed.

Can't manipulate inserted call-out due to 'Layout Options' box covering an edit point

Posted: 30 Oct 2014 05:50 AM PDT

In Word, I've inserted a callout.  It's a box with a line coming from it.

I need to move one of the edit points of the line, but this "Layout Options" box is covering it.

I've already formatted the object yet this box will not go away.

The box does not give me an option to ignore it.

Hidden Section Break??

Posted: 30 Oct 2014 05:21 AM PDT

Good morning All,

I was asked to resolve an issue with a Word 2010 document, as follows:

Originally the document had a next page section break at the end of each and every page.  I removed them all, replacing them with page breaks using Find and Replace.  I then put a section break at the end of page 2, the back of the cover page and set up different odd and even pages, so I could alternate the page number to the outside of each page, on the left of even pages and the right on odd pages in the footer.  As I was moving through the document applying styles as I went I notice that I was in section 3 and the page numbering had gotten messed up.  There should only be 2 sections.  Lo and behold, between page 46 and 47 is a change of section and the misnumbering of pages begins.  It goes from page 46 to page 19.  Show hide button on, show hide button off, I do not see the section break and Find does not detect it either. The Hidden check box in the Font dialog box is unchecked.

 Any suggestions on how to correct this will be appreciated.

Paul

Word 2013 - Macro - Automate replacing an image with another image, keeping the formating of the previous image it is replacing

Posted: 30 Oct 2014 04:52 AM PDT

Hi,

I've been searching for a way to create a macro to do the following:

- Select the image(InlineShape) in the footer of a document and replace it with the image in 1 specific folder without needing to open 'inset picture' dialog.

- Keeping the previous image's formatting.

I'm not sure, but I feel like this should be fairly straightforward. It would be great if the macro would allow you to record a process like this.

I'm doing this across many files so a quick and easy process would be greatly appreciated.

Cheers,

Rod

Word Anchors

Posted: 30 Oct 2014 04:18 AM PDT

I really do not understand the whole idea of anchors in Word 2013. Could someone please suggest how I could get more information on this?

Skip records in mail merge

Posted: 30 Oct 2014 03:51 AM PDT

I'm creating a mail merge of place cards from an Excel file.  In the Excel file I have Attending Meal in one field and Partner in another.  Not everyone is taking a partner so in that field I have No.  I'm trying to create a merge so that if the Partner field is No it will not print "No" on my place card and skip to the next record. I've tried Skip Record if Partner Equals No but it doesn't work.  I get a message "Word could not merge the main document with the data source because the data records were empty or no data records matched your query options".  I've also tried Next Record If but that doesn't work either.  Where am I going wrong?  Any advice and help would be much appreciated. 

Word - create a template that when opens it aks a few questions and then populates part of a document

Posted: 30 Oct 2014 02:41 AM PDT

Hi

I am trying to create a word document that when you open it a form pop's up asking a few questions to be filled out. These values will then be input into a template.

Is this possible and if so how?

Thanks

Word Forms - One drop down box that changes several parts of the document

Posted: 30 Oct 2014 02:40 AM PDT

Hi

I am trying to create a Word Form where people can select a value from a drop down box and it appears in three parts of the letter (rather than having to select the same thing 3 times). Is this possible?

Thanks for the help.

Macro stops writing after first protected table.

Posted: 30 Oct 2014 01:27 AM PDT

Hello

In our company we are encountering a macro template problem with several computers. We are using Windows 7 Enterprise SP1 with Microsoft Office 2010. There is also in use here IFS as an enterprise resource planning software. IFS server is running Windows server 2003 R2 Standard Edition SP2 and Microsoft Office 2010.

Problem itself is as follows. When opening .doc Word templates from IFS, Word stops macro writing to the first protected table. It writes fine to the first unprotected fields but after first protected table it stops writing even there would be unprotected macro fields. With most of the computers it is working fine so it is not compatibility problem or protection problem. When IFS is run from its server there is no problem. Problem occurs only in Windows 7 environment. 

What could cause the problem? 

content controls differentiate editable and locked(on screen without printing)

Posted: 30 Oct 2014 01:18 AM PDT

I would like to show the users which are the content controls locked and which are not in my template.

How can I do this? I dont want to show difference in font colours because I want users to print them without any noticeable difference. But they have to see on the screen which are editable and not.

Is it possible? Please someone help me as I am stuck for long time...

Word 2010 change colour of the text automatically when user change the default text

Posted: 30 Oct 2014 01:09 AM PDT

I am preparing a Word 2010 template using content control. There are few locked and few unlocked controls for users to edit/change. Unfortunately the formatting should be same for both these contents. I am trying to show the users which are locked and which are not. If I show using red colour fonts users can understand they are the one to be modified.but while printing the difference is seen. I have tried using macros NoMacro button but it did not allow me more than a line.

Is there anyway to show locked content controls by different colours or something without affecting the printout?

Or is there a way to change the color of the text if users change the default text using VBA code or something (ie. all red colour texts are for users to modify, once they modify turn back to black automatically)?

Thanks in advance.


Requesting HELP w-Printing Problem in Office 2007-Word - missing body of text-

Posted: 29 Oct 2014 09:09 PM PDT

My Word is suddenly having printing problem in where the body of text is missing (heading ok), & all other Office 2007 (enterprise level) products printing ok- as well as all programs including email & web-site info.   I searched everywhere without success.  apparently some file with printing instructions  in the normal template is missing or altered.      I have looked for   the template file.     normal.dotm   & can not locate it.      if this is the critical point.  how  or where can I get a fix?  

  I also tried uninstalling the full Office package & reinstalling.   No change.   Please Help!   This is important to me & my work.

Microsoft Word Bug

Posted: 29 Oct 2014 08:39 PM PDT

So this issue is a little hard to explain but whenever I shut down word a lot of little clipboards pop up all over the document screen. I don't know what they are doing or why they show up but it is weird and I have no idea why it does that. I assume it has something to do with the clipboard but it happens even when I haven't cut and pasted something into the document. 

Office 365 Home Premium

Posted: 29 Oct 2014 08:33 PM PDT

I have a Toshiba Satellite running Windows 8.1 and using Office 365 Home Premium.  From the start I have had problems opening Word and Excel documents.  On every occasion I open documents they freeze and the "not responding " message comes up.  Most times it takes at least 6 or 7 attempts before it finally opens.  This is VERY frustrating so any help would be much appreciated.

Many thanks

Shaddowgirl

How do I change the default settings or create a template in Word 2013?

Posted: 29 Oct 2014 08:16 PM PDT

I downloaded Office 365.   In Word I will be doing a series of documents that require a specific font, font size and line spacing for each document.  Is there a way to make this my default or make a template that I can use over and over rather than changing for each separate document?  I also don't like that I can't just save, give my document a name and go to the next document.  I think I can work around this but the formatting is a pain in the neck.  The online version seems kind of limited.

Microsoft Word and PowerPoint Aren't Working Properly

Posted: 29 Oct 2014 06:16 PM PDT

After opening Microsfot Word or PowerPoint 2013 (im not sure about the other office applications) after opening them up, they work fine then a few minutes later BAM! It wont respond and I have to end the program. I have a Toshiba Satelite C55t-A5287. Thank you so much to whoever answers this! 

Edit an AddressBlock Field

Posted: 29 Oct 2014 05:53 PM PDT

How can one change an AddressBlock?  And why is it so hard to find such information?

I have an AddressBlock (was generated originally by the wizard):

{ADDRESSBLOCK \f "<<_TITLE0_ >><<_FIRST0_>><< _LAST0_>><< _SUFFIX0_>> <<_COMPANY_ >><<_STREET1_ >><<_STREET2_ >><<_CITY_>><<, _STATE_>><< _POSTAL_>><< _COUNTRY_>>" \l 1033 \c 1 \e "United States" \d }

Now I need to Add in #Unit after Street1, if there is a Unit value, otherwise leave it out.  How can I do this?

Word sporadically displays the Comments (Revisions) pane

Posted: 29 Oct 2014 04:57 PM PDT

Split from this thread.

I actually got a request from someone else who was working on an existing document and this was happening to him as well.  He also showed me a seperate document where the comments pane wouldn't open when they added a comment.  So, this is very sporadic.

As a test I created a new document and it started to do this in the new document as well. 

I have Final: Show Markup

Show Markup: Everything is selected with Balloons: Show all revisions inline

View is in Print Layout Mode.

This is pretty frustrating.  There has to be an option somewhere to turn off the comments pane for good.

Merge: 1. No empty records in output once data source records from input finish? 2. We must alwyas sort data as needed in Excel source doct and not from Word?

Posted: 29 Oct 2014 04:33 PM PDT

I've searched and searched but I obviously don't know what to call the 2 things I'm looking for as nothing comes up that is pertinent.

1.  I've been doing a merge but have run into the problem of having more "empty" records at the end of the merged document when the data source records run out.  What I mean by that is that, in this particular case, my Excel data source has 47 records.  The target Word document has 65 empty "labels" ready to receive the data.  The merged document has 47 filled "labels" and the balance are empty "labels" which I must then delete.

Is there a way to create, perhaps, just one page of "labels" (or target document that holds the merged data, in other words) so that when the records finish, the empty ones just won't appear and won't be populated?  I know how to do this in other applications but it's never been an issue with Word before, as far as I can remember.

2. The other question is, must we always pre-sort the data as we need it in the Excel source file?  There's no way to have that as is and have Word sort the records, as needed?  I know that sounds funny, but just want to make sure there's not a feature in Word mail merge that I may be unfamiliar with that perhaps sorts the data without the source document being affected?

Thank you!

Word 2013 Ribbon Completely Gone--Only old fashioned File and Window menus visible

Posted: 29 Oct 2014 04:19 PM PDT

I was editing a document which had an embedded Visio file as a figure. When I double clicked on the figure Visio, opened but then then immediately ended abnormally. Since then the document shows no ribbon, only the old fashioned File and Window menus. Other documents show the ribbon as expected, so the problem is localized to the settings for this particular document. The second image below is a screen capture of this document open in Word 2013. When I go to File => Word Options => Customize Ribbon, I see the first image. Everything is grayed out. How can I reset the document short of cutting and pasting 40+ pages into a new document.

2013 Word Keeps Crashing

Posted: 29 Oct 2014 04:02 PM PDT

So, I'm using an older document because it has a format my professor has been using for years. I just go in and add my own text to the document. However, when I get almost done, the document will crash. Every time I open it, it will work for maybe a few seconds, then when I try to do something, it crashes on me. Any ideas?

Mail Merge in Word 2013 only works in plain text

Posted: 29 Oct 2014 10:46 AM PDT

Hello,

We recently upgraded to Office 2013 and I have found that the mail merge does not work in HTML format.  I can get it to work in plain text but it requires you to click Allow for each email recipient.  Is there a fix to this.  I am using google app sync with Outlook and do not have any issues in that regard.  It work with the previous version of Word.

Thank you in advance,

Mike
Subscribe to: Posts (Atom)