Pages

Search

Microsoft Word - open any file, then left with a blank word.docx

Microsoft Word - open any file, then left with a blank word.docx

open any file, then left with a blank word.docx

Posted: 22 Feb 2014 02:04 PM PST

When I open Word, I'm presented with with a blank "Word.docx" file, which is fine. But, if I want to open an existing file, I click file->open, and select a file listed under "Recent Documents". Of course the file opens--all good--but then I'm left with the "Word.docx" file mentioned earlier. I can close it, no problem, but isn't there a way to avoid this unnecessary step?

Cheers,

Deke

Office 2007 - Working with Headers and Footers

Posted: 22 Feb 2014 11:14 AM PST

After placing different headers on alternate pages of a book manuscript (chapter title versus my name), I then place page numbers on continuous pages centered in the footer. After doing this, and saving the document, I find that when the document is reopened surprises await me.

A - The header now has the same wording on both pages or B - The sequence of page numbers has been scrambled into a non-sequential order but the headers read correctly. After much trial and error editing, I either get the pages numbers in the right order but the same header now appears on all pages - - or if I edit to place different headers on alternate pages, I get the page number sequence scrambled up again. However, this mysterious malady does not occur on all chapters of the manuscript.  Apparently, the intrigues of Word apply this mysterious action randomly. Would appreciate help in sorting this out.

All ms office items are installed, they were working fine for the first month, but recently have stopped working on my desktop, but they work fine on my Surface pro 2 ??

Posted: 22 Feb 2014 09:04 AM PST

All ms office items are installed, they were working fine for the first month, but recently have stopped working on my desktop, but they work fine on my Surface pro 2 ????   help    Joe.G

MS WORD 2013 not opening

Posted: 22 Feb 2014 08:25 AM PST

 i have window 8 and MS word 2013
WORD just stopped working and will not open..i click ..i get the hourglass and then nothing
it was working last week

Word document has been automatically changed to Adobe Acrobat Document

Posted: 22 Feb 2014 06:03 AM PST

Hi,

I've recently installed Office Home and Student 2013 to my new laptop. I do not have any problems with powerpoint or excel files. However all my existing word documents have been automatically changed to Adobe Acrobat Document. As such I'm unable to open the file. Pls assist. thank you.

Word 2013 'Current list' disappears of cited works. Will not save. - help!

Posted: 22 Feb 2014 06:01 AM PST

When I create the 'current list' of cited and placeholder references on my document they get lost every time the document is closed even though the document has been saved.  I have tried document recovery, checking on saved version on skydrive and versions on memory stick - it always deletes.  It does it now on every document I create,  strangely documents from a couple of months ago do not seem to be affected.  Can anyone help?   Regards   Roger

Word 2010 Label Templates and Change Picture Function

Posted: 22 Feb 2014 06:00 AM PST

I am working with label templates in 2010 and the background of each cell is a picture.  The picture has been sized outside of the cell margins to allow for bull bleed printing.  I use different photos as background so I want to use "change picture" to select a different picture and have it replace the existing while keeping the same size.

I'm finding that when I do the replace it will keep the width but the height aligns with the table cell outline.

What am I doing wrong?  


Thank you.

Can no longer use touch screen to format pictures in word

Posted: 22 Feb 2014 04:25 AM PST

Hi

I'm using word on the Microsoft surface and I use to be able to change picture sizes and move them using the touch screen but now I cant. Grey circles appear around the picture instead of the white circles and I can only move them and alter them using a mouse.

Anyone know what's happened or how I can change it back!

INSERT ROMAN NOS. IN word & excel

Posted: 22 Feb 2014 03:28 AM PST

I AM WORKING AS A MATHS TEACHER. I ALWAYS USE WINDOWS GENUINE PRODUCTS.

NOW I NEED TO INSERT AND PRINT  ROMAN NUMBERS IN MY WORKS.

I COULD NOT FIND  ROMAN NUMBERS EVEN IN CHARACTER MAP BOX ALSO.

PLEASE HELP ME , BECAUSE IT IS VERY USEFUL IN MY SUBJECT.

THANKING IN YOU.

Auto create a Hyperlink in VBA

Posted: 21 Feb 2014 08:17 PM PST

Hi,

I have created a Macro to Auto Create a Hyperlink to "Place in This Document".

I have created an Index where I place the Hyperlink, the Title in the Index is the same to where I want to go with the Hyperlink.

I have a problem, as if I just set the complete Title for the Hyperlink, it does not work on long Titles as it puts a "#" in front of the link.

If I tell it to only take the first so many Characters using "LEFT(TLinkS, nn)" it works for the one I am testing it on and Titles of less than the number, but it does not work on all.

if I set the length to "Number of Characters" it works, on that title but not on others.

Title                                           Number of Characters.

Boss                                            Works on Not set or any number

The Vampire Diaries 2: The Originals                               19

Two Pints of Larger and a Packet of Crisps                       12

You, Me and Them                                                           11

Here is a selection of my list of my current Titles...

2 Broke Girl$

24 Hours

24 Hours: Live Another Day

30 Rock

A League of Their Own

Ben & Kate

Boss

The Big 'C'

Breaking Amish: Los AngelesBreaking

Amish: Brave New World

Brooklyn Nine-Nine

Doctor Who: The 12th Doctor

Don't Trust the B**** in Apartment 23

Fact or Faked

F/X: The Series

Marvel's Agents of S.H.I.E.L.D.

Police Women of…

The Vampire Diaries 2: The Originals

Two Pints of Larger and a Packet of Crisps

You, Me and Them

Here is my Macro...

Sub Hyperlink()
'Setting Hyperlink
    'System Settings
    Dim styStyle As Style
    Dim DandST As String
    Dim TLinkS As String
    Dim TLinkR As Range
    Application.ScreenUpdating = False
    StatusBar = "Please Wait...  Creating Hyperlink..."

    'Selecting the Programme Title
    With Selection
        .EndKey Unit:=wdLine
        .HomeKey Unit:=wdLine, _
            Extend:=wdExtend
    End With

    'Replace Spaces with '_'
    With Selection.Find
        .ClearFormatting
        .Replacement.ClearFormatting
        .Text = "^w"
        .Replacement.Text = "_"
        .Forward = True
        .Wrap = wdFindStop
        .Format = False
        .MatchCase = False
        .MatchWholeWord = False
        .MatchWildcards = False
        .MatchSoundsLike = False
        .MatchAllWordForms = False
    End With
    Selection.Find.Execute Replace:=wdReplaceAll

    'Set the Hyperlink
    TLinkS = Selection.Range
    Set TLinkR = Selection.Range

    'Replace '_' with Spaces
    With Selection.Find
        .ClearFormatting
        .Replacement.ClearFormatting
        .Text = "_"
        .Replacement.Text = " "
        .Forward = True
        .Wrap = wdFindStop
        .Format = False
        .MatchCase = False
        .MatchWholeWord = False
        .MatchWildcards = False
        .MatchSoundsLike = False
        .MatchAllWordForms = False
    End With
    Selection.Find.Execute Replace:=wdReplaceAll

    'Set the Display & ScreenTip
    DandST = Selection.Range

    'Set Hyperlink
    ActiveDocument.Hyperlinks.Add _
        Anchor:=TLinkR, _
        Address:="", _
        SubAddress:="_" & Left(TLinkS, 12), _
        ScreenTip:="Goto " & DandST & "...", _
        TextToDisplay:=DandST

    'Delete Hyperlink Style if it Exist...
    StatusBar = "Please Wait...  Deleting the Hyperlink Style..."
    For Each styStyle In ActiveDocument.Styles
        If styStyle.NameLocal = "Hyperlink" Then
                If styStyle.InUse Then
                    styStyle.Delete
                Exit For
                End If
        End If
    Next

    'Start Point
    With Selection
        .HomeKey Unit:=wdStory
    End With

    'System Settings
    Application.ScreenUpdating = True
    StatusBar = ""
End Sub

I have set the place I think the problem is in BOLDITALIC.

Thank you for looking in on this for me.

Neil

Word 2013 Bug: The "Do not check spelling or grammar" option checked when pasting screenshot from OneNote

Posted: 21 Feb 2014 03:28 PM PST

This one is rather deep and was tricky to figure out what was going on.

Background

Our organization has a LOT of old 2003 documents that are used as forms. I now have some users adopting OneNote. These users are using 2013. That said, this seems a Word issue, or perhaps an interaction with pasting pictures from OneNote since copying a picture directly and pasting into Word does not cause this issue. Windows 7 is the OS. Reproduced on multiple machines. I have only tested with screenshots and not pictures inserted into a OneNote document first.

Steps

  1. Open an existing 2003 Word document (.doc) OR create a new one using 2013, I have tried both.
  2. Open OneNote
  3. Take a screenshot of something (Win+S)
    1. You can put screenshot in a tab, but you can just copy to clipboard
  4. Paste screenshot into Word document.
    1. Your cursor should be along bottom right edge of picture you just pasted, before the paragraph mark. Attachment 1.

  1.        Add a new line (press enter button) and type something that is spelled wrong.
    1.        Spelling is not corrected
  2.        Go to Review ribbon > Language > Set Proofing Language > Notice that Do not check spelling or grammar option is checked.
  3.        Screenshot of example attached as Attachment 2.

Expected Result

  1.        Should work same as when you do this with a document that is in 2010/2013 format.
    1.        2010/2013 documents have new paragraph use the normal style setting for the Set Proofing Language options.

Microsoft CRM - Crystal reports hangup

Microsoft CRM - Crystal reports hangup

Crystal reports hangup

Posted: 25 Oct 2004 08:47 AM PDT

Wizard,..........I dont use that, but.....have you tried creating a report
manually? Can you save, and later view this report via CRM?

since its only a workstation, might be worth uninstalling the enhancements
and Crystal, and try reinstalling...

-gary

"Krista" <microsoft.com> wrote in message
news:com... 
2000 
ago. 
one 
machine. 
that 
your 
CRM 
Reports 
necessary 
potential solutions 
Crystal Reports 

MS Word on CRM Server

Posted: 24 Oct 2004 01:43 PM PDT

I thought about this type of solution but it makes my solution fragmented.
This would mean that 99%of the CRM solution is web based but when it comes to
creating Word documents for sending these customized quotes, they have to run
a small app that sits on every PC that accesses the CRM. Any additional ideas
are greatly appreciated!


"Julien Lepine" wrote:
 

CRM Application Professional exam

Posted: 24 Oct 2004 03:15 AM PDT

The dummies book is a very inexpensive resource but you do need hands on
experience.
I used the experience and the book to get a 85%

"O.K." wrote:
 

Setting up my product correctly??

Posted: 22 Oct 2004 09:05 PM PDT

Okay another question. When I put contact in Outlook do they automatically go
in CRM. I have setup the Outlook client? I think when I put stuff in CRM
they go in outlook right?

"Dan Quinton" wrote:
 

Manually creating Invoices with C#?

Posted: 22 Oct 2004 04:09 PM PDT

Look in the SDK for the CRMInvoice.Create method (with example) and then use
the CRMInvoiceDetail.Create method to add the detail lines.

It is not 100% XML, but XML is important.


Stephen

"David" <microsoft.com> wrote in message
news:com... 

Crystal - Failed to download secEnterprise plug-in setup program

Posted: 22 Oct 2004 03:36 PM PDT

Anytime....
--------------------
From: "Jaime" <com>
References: <phx.gbl> <phx.gbl>
Subject: Re: Crystal - Failed to download secEnterprise plug-in setup program
Date: Mon, 25 Oct 2004 15:47:09 -0400
Lines: 112
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1437
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441
Message-ID: <#phx.gbl>
Newsgroups: microsoft.public.crm
NNTP-Posting-Host: ip68-101-33-51.dc.dc.cox.net 68.101.33.51
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA01.phx.gbl!TK2MSFT NGP08.phx.gbl!TK2MSFTNGP10.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.crm:30991
X-Tomcat-NG: microsoft.public.crm

Willie,


Thank you thank you thank you.


Jaime


"Willie Green" <microsoft.com> wrote in message
news:phx.gbl... 
issues with the application being unable to access the msi files or those
files not existing on the Microsoft CRM server. I would like to 
in the following directory located on the CRM server. The secEnterprise.msi
was contained in that folder. (X=Drive where CRM was 
9\Packages\win32_x86 
and run the SecEnterprise.msi on the workstation. You will then need to
close and re-launch Crystal Reports before attempting to save a 
under (your_drive_letter):\program files\Crystal Decisions\Enterpris
9\Win32_x86\plugins\auth\secEnterprise and verify that the registry 
Decisions~9.0~Enterprise~auth plugins~secEnterprise matches. You may have to
change the version in the registry to match the file version. Be sure 
rights. 
cpmsftngxa10.phx.gbl!TK2MSFTNGXA01.phx.gbl!TK2MSFT NGP08.phx.gbl!TK2MSFTNGP09
.phx.gbl 
box. 
rights. 







Thank you, Willie Green,
Microsoft Business Solutions Support

This posting is provided "AS IS" with no warranties, and confers no rights.

Can I have an Apple computer client on a MSCRM .net network?

Posted: 22 Oct 2004 01:25 PM PDT

There are 2 versions to the CRM client: Web & Outlook. Both require a Windows
OS. As far as I know, they won't work under virtual Windows on Mac.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 22 Oct 2004 16:35:04 -0700, "Jeff Anderson"
<microsoft.com> wrote:

Matt:
I think the MSCRM client software is just Outlook. I'm not sure. We haven't
deployed yet. Could I simply load Outlook XP under virtual Windows on my Mac?

Thanks,
Jeff

"Matt Parks" wrote:
 

Inbound emails not being assigned to the activity

Posted: 22 Oct 2004 07:01 AM PDT

Yes, I know where to look for the activites its just there not being
assigned, is there any debugging that can be placed onn the email router?

Thanks
Paul

"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 

Metadata Cache Error No entity when taking SFO offline

Posted: 21 Oct 2004 02:59 PM PDT

I will leave the system alone for a long time on the next person's SFO
install. I assume I'll get a tidy message when it finishes.

As for the first install, going offline and online hasn't been a problem. I
just need to find a way to replicate all data. I found out this db was
migrated from a test install many months ago so I think I now have to follow
article 829504 to "Turn on Replication." I'll attempt this first before
trying a 2nd SFO install.

"John O'Donnell" wrote:
 

Browser closes when I try to launch CRM

Posted: 21 Oct 2004 10:23 AM PDT

Thanks guys

It was the goggle toolbar that was the culprit, even though the popup
blocker was disabled.

Thanks again for you help
Dave


"Kyaw" <net> wrote in message
news:phx.gbl... 
you 
in 
launch 

License Key for AWC 1.2

Posted: 21 Oct 2004 09:35 AM PDT

Thanks i'm not sure how i missed it the first time through.

"com" wrote:
 

License Key for Adventure Works Cycle

Posted: 21 Oct 2004 09:31 AM PDT

The CRM Implementation Guide has a set of License Keys for Adventure Works
Cycle.

Thank you,

Tami J. Lemar
Microsoft Business Solutions Support

This posting is provided "AS IS" with no warranties, and confers no rights.

SFO Offline Issue

Posted: 21 Oct 2004 07:59 AM PDT

I ran across this error recently, and I was about to pull
my hair out over it. Two things resolved it for us, they
are:

First, add the ASPNET service to your Administrators
group. To do this:
Right-click on My Computer, select Manage, expand Local
Users and Groups, open the Groups folder, right-click on
Administrators, and select Properties. Click the Add
button, click the Locations button, select the first
entry on the tree (your computer's name), click OK.
Type "ASPNET" in the "enter object names to select" box
and click "Check Names", the entry should become
underlined, click OK twice to exit.

Second, download the KB841124 Outlook permission fix here:
http://support.microsoft.com/default.aspx?kbid=841124
Extract the files to a folder, open a command window,
navigate to the folder, and execute this command:

Outlooksecmain.cmd domainname\username

If you receive an "invalid data" error, execute the
command again. Once complete, you can close the command
window and delete the folder from your drive.

Hope this helps. Good luck!

Daryl Hulten


 
SFO I receive an 
user does not have 
found. Outlook is 
syncing/offline is 
works, none of 
occurred whil trying to 
I can access all 

Country Picklist

Posted: 20 Oct 2004 09:25 AM PDT

You wouldn't happen to have the "onChange" code would you?

Also, after exporting the customisation to XML and then editing the XML to
import I get a warning message at import time saying that all data will be
deleted during the import. I stopped at this point, what data is it going to
delete? Is it only talking about the customisation code or the whole
database. Consequently I haven't added the new stuff yet.

Paul



"Chris Rogers" <com> wrote in
message news:supernews.com... 
Subscribe to: Posts (Atom)