Pages

Search

Can message journaling be done on a single mailbox in Ex2000 - Microsoft Exchange

Can message journaling be done on a single mailbox in Ex2000 - Microsoft Exchange


Can message journaling be done on a single mailbox in Ex2000

Posted: 09 Feb 2005 08:31 PM PST

On Thu, 10 Feb 2005 06:39:02 -0800, SilverICE
<microsoft.com> wrote:
 
Unfortunately that won't capture outbound messages.

Datbase Size Understanding

Posted: 09 Feb 2005 08:23 AM PST

That is what I thought.. i will look over that file and give it til friday
night to rerun the defrag!

thanks

"Mark Arnold [MVP]" wrote:
 

junkmail folder

Posted: 09 Feb 2005 05:59 AM PST

Take a look at SpamMover application here:
http://www.ivasoft.biz/spammover.shtml

--
Regards,

Victor Ivanidze,
software developer
 

*.$$$ files growing in windows/temp

Posted: 08 Feb 2005 05:31 AM PST

My transaction logs and stores are all on seperate volumes. Nothing in the
event logs to indicate any issues, server is running fine. Running Sophos
Pure Message 1.0 antivirus/antispam, showing no errors, all proper exclusions
in place. Only other software installed is Veritas Backup Exec 9.1. Windows
and Exchange completely up to date. Exchange 2003 SP 1 installed.

Upon further review the timing of the log files appears to directly coincide
with background scanning of the exchange databases by Sophos Pure Message,
going to contact thier support and see what they have to say.

Thanks

"Lanwench [MVP - Exchange]" wrote:
 

Exchange not allocating smtp address to public folder

Posted: 08 Feb 2005 04:25 AM PST

Hi Lanwench

I promise you it really did work the way I described it: Outlook 2003 and
Exchange 2003/ SBS2003.

Still it doesn't really matter because, as I said, we worked out how to do
it in Exchange anyway.

The reason for mail-enabling the folder is so that customers can send
correspondence directly there. I see your point about dragging vs fowarding
though.

Thanks for your advice

Vaughan



"Lanwench [MVP - Exchange]" wrote:
 

Is this possible

Posted: 08 Feb 2005 02:43 AM PST

Doug Versch wrote: 

Exchange needs a domain, yes.


Where is the email going?

Posted: 07 Feb 2005 09:59 PM PST

Thanks

Actually I found it yesterday. Things are much better now as long as that
user does not have an account on the system it works fine.

Now I got a new problem. I previously created a win2k3 account for one of my
laptop users (which I haven't moved to the win2k3 domain yet) so whenever
someone tries to send him an email it would go to his exchange box. I
deleted the account and the box (after him viewing its contents of course).
Now when I try to send him an email, it bounces back. The error looks like
it is coming from my ISP.

I removed the personal info and put << some text >>
If you see mx1.myprovider.ca, it seems that it tried to send the email to my
ISP. The account exists on the ISP server, so why does it bounce back? Or is
this a local message?

Any ideas?
Thanks again for your help.


Your message did not reach some or all of the intended recipients.

Subject: Test
Sent: 09/02/2005 4:30 PM

The following recipient(s) could not be reached:

<<Name of recipient>> on 2/9/2005 4:45 PM
The e-mail account does not exist at the organization this message was
sent to. Check the e-mail address, or contact the recipient directly to find
out the correct address.
< <<mx1.myprovider.ca>> #5.1.1 SMTP; 550-Mailbox unknown. Either there is
no mailbox associated with this> Your message did not reach some or all of
the intended recipients.

--
Thank you
Please post only
"Karel Florian" <com> wrote in message
news:googlegroups.com... 


no Space

Posted: 07 Feb 2005 06:50 PM PST




HI I ran Eseutil and received no errors and was wondering,



If I run Eseutil and the priv DB reflect no change in size.

However there was a lot of account with large mailboxes removed and the temp
file reflect a 2 Gig drop. Is it safe to manually rename the prive , rename
the temp file as the prive and move the files.


----------------------------------------------------------------------------
--
scott salvatore wrote:
Ok It indicated that it had competed successfully however the temp file is
two gig smaller than the current privfile was I suppose to replace the
current with the temp by manually removing the priv and renaming and coping
over the temp?

Again there is no room on the drive containing the priv db

I ran the following

C:\winnt\system32\eseutil.exe /d /ds /tg:\exchback\tempdfrg_ds.edb /p
C:\winnt\system32\eseutil.exe /d /ispriv /tg:\exchback\tempdfrg_pri.edb /p

What the command for deleted item retention on your stores

Also I did not see an event ID 1221 in the logs whats online maintenance
----------------------------------------------------------------------------
-
Yes, normally it does, if it completes correctly - but that said, what was
the exact command you ran? Did you use /p ?

How much free space is available to recover? You can see this in your
application event logs (look for event ID 1221) after online maintenance has
run.

If you use deleted item retention on your stores (which I strongly
encourage) note that that can take up a lot of space, too.

Any chance you can stick more drives in this server & move the databases &
logs there for the duration?
----------------------------------------------------------------------------
-
scott salvatore wrote: 





Server limit on rules

Posted: 07 Feb 2005 04:17 PM PST

Thanks for the reply. So the only solution would be to either have the user
consolidate/delete some rules or use 3rd party software?

"neo [mvp outlook]" wrote:
 

Exchange 2003 restore

Posted: 07 Feb 2005 11:11 AM PST

There's nothing there dealing with the specific situation I'm faced with.

"Teo Gomez" wrote:
 

Auto Reply

Posted: 07 Feb 2005 10:31 AM PST

Already checked all that, is there some where like the system administrator
account or a defaut email address for NOR's??

"Lanwench [MVP - Exchange]" wrote:
 

moving one box of exchange 2003

Posted: 03 Feb 2005 11:01 AM PST

If you have moved off all the roles and data from the E2K server, complete
the process by uninstalling Exchange - this is necessary so that we also
remove any AD objects related with the server.

Cheers,
--
Eric Tam, MCSE
Microsoft Exchange Support

Please do not send email directly to this alias. This alias is for newsgroup
purposes only.

This posting is provided "AS IS" with no warranties, and confers no rights.

"Marcel" <spam.me.lkl-it.nl> wrote in message
news:420a26b3$0$28993$xs4all.nl... 


Microsoft Word - Printing issue of Word 2013

Microsoft Word - Printing issue of Word 2013


Printing issue of Word 2013

Posted: 12 Aug 2013 02:44 PM PDT

Hi everybody;
When I want to print my document or export it to a PDF file a strange problem occurs. In this state, the output is completely different from print layout view. For example the position of lines and so all page numbers is changed. In other word, the page e.g. 14 in output is different from page 14 in print layout view.

I am pretty sure that the printer paper size matches the Word document paper size and that in the backstage Print view, the "Scale to paper size" under the "1 Page Per Sheet" drop down is set to "No Scaling".

Page layout Settings:
Page Size: A4 (21 x 29.7 cm)
Margins- T: 3cm, R: 3cm, L:2.5cm, B:2.5 cm
Orientation: Portrait
Gutter Position: Right
Document view: Right to Left

System details:
OS: Windows 8 Enterprise x64 (updated)
Office: plus 2013 x64 (updated)
Writing language: Mixed (Persian and English)

Feature Request - MS Word - Add Automatic Save As Incremental Version

Posted: 12 Aug 2013 02:34 PM PDT

I have to say that I've lost more work through this MS Word 2013 SkyDrive integration than with any other version of Word in that past... and I've been using MS products since at least 1996. I'm seriously getting ready to discard Microsoft products and the PC environment altogether and cross over to Apple Macintosh.

 

My feature request is as follows:

 

Add an automatic Save As (incremental version number) feature to Word.

 

This means that if the feature is added and turned on, a separate file will be automatically created such as:

filename-v01.docx

filename-v02.docx

filename-v03.docx

 

And add a manual keyboard Save As Incremental Version Number command, too.

 

 

How do I turn on Manage Versions?

Posted: 12 Aug 2013 02:18 PM PDT

I'm using MS Word 2013 through the Home Premium subscription.

How do I turn on Manage Versions?

Every time I search for a solution I only get results that talk about saving to previous versions of documents, or upgrading the software.

Lost Work - Word did not save locally or to SkyDrive

Posted: 12 Aug 2013 01:51 PM PDT

I'm using MS Word 2013 linked with SkyDrive.

 

During the last three hours I created and typed a new chapter, along with making several revisions to previous chapters. I have manually saved the document periodically, and Word is also set to automatically save every 10 minutes.

 

During this last save, something weird happened. The document reverted to the version from this morning -- which means at this time, all of my work performed today has become lost.

 

Is there a .tmp file somewhere that I might be able to recover my work from?

 

Thanks

how do I print Word 2010 to glossy photo paper

Posted: 12 Aug 2013 01:19 PM PDT

The printer window only allows for plain paper and with this setting glossy paper will not print.  I have an HP Photosmart printer. Help.

Gaps in shading occur with format change (Word 2010)

Posted: 12 Aug 2013 12:56 PM PDT

When I add shading to a series of paragraphs, a change in the formatting often creates a gap in the shading.  For example, if I add a border after the last paragraph, a white space appears between the last paragraph and the preceding paragraph.  Sometimes it also happens if the spacing between paragraphs in the shaded area is different.  These are both inconsistent occurrences but happen often enough it causes problems for me in writing.  I have compared instances where it occurs and where it doesn't and I can't find anything different between them that would cause it to happen.  This is a problem that my co-writer also experiences with her documents.

Any ideas?

Can I make a combo box or drop down list that will display numbers 0-10,000 without typing it in by hand?

Posted: 12 Aug 2013 12:49 PM PDT

I'm new to these aspects of word and am trying to make an invoice where I can select quantities using the drop down list. Any help or suggestions are greatly appreciated. Thank you.

Office Web Viewer events

Posted: 12 Aug 2013 12:21 PM PDT

I've embedded office web apps iframe in my web application to preview the office documents, now I would like to listen to page navigation events for tracking the user activity, is there a API for office web apps server, appreciate any ideas on how this could be done ?

Understanding Margins and Headers and Footers

Posted: 12 Aug 2013 12:08 PM PDT

Can someone give me a simple explanation as to how headers and footers interact with the top and bottom margins of a page e.g.

- it seems as though the header resides within the space allocated to the top margin?

I have just been doing "trial and error" to figure this out with varying results - I tried to find something that would explain this better.

I could provide more specifics but I actually think I just need to know the "rules" as to what applies to what and what happens if one overlaps another object (e.g. if a header grows larger than the margin, what happens)?

Albert Gostick

Microsoft Word track changes: same timestamp/date on every comment balloon?

Posted: 12 Aug 2013 11:04 AM PDT

Hello. I am having an issue with track changes. I can work on a document that has 2 reviewers or up to 10+ reviewers. Sometimes I see that in comment balloons the timestamp/date is the same on every single one. I do not understand why this is happening. If anyone has run into this error before, please let me know if its a setting in Word that I need to unclick, etc.

"office 13" "number of pages"

Posted: 12 Aug 2013 11:00 AM PDT

In Office 13, how do I insert "number of pages" (in header)?

How to recover wordret.msi after crash. I have searched and can't find it.

Posted: 12 Aug 2013 10:19 AM PDT

I cannot install anything without this file.  I have tried to reinstall MS Office Suite 2003 with MS Word on it but it will not install without this file nor will anything else.  I am running Win XP Home, sp3

Envelopes Are Printed in the Opposite Direction

Posted: 12 Aug 2013 09:11 AM PDT

I have been attempting to print envelopes to my Ricoh Copier.  I have tried all sorts of different envelope positions and printer settings but the text keeps printing sideways as if the envelope was in portrait.  We are using Word 2010.  I don't know how to fix this and I am hoping that someone can help!

Thanks!

working offline

Posted: 12 Aug 2013 06:35 AM PDT

I have just got Microsoft office 365 University. when I open word 2013 it connects to the internet. I don't want it to do that. can I stop it doing so? how?

Why won't word 365 open certain files?

Posted: 12 Aug 2013 06:04 AM PDT

Hi Folks
I've been running Office 365 on my Windows 7 Asus EP121 slate for a few months now. Plenty of annoying issues with Outlook stopping Kaspersky but Office had been OK up until two days ago.
One of my regularly used files, my work letterhead (a .doc file), now causes Office to crash everytime I try to open it. I try to open it from Office, file manager and any other means available and now it just crashes. I checked and the same file opens on my old computer running Vista and office 2007 without problem.
Office 365 opens all the other .doc files but just not the letterhead.
I'm not computer savvy and tear my hair out wasting so much time with silly annoying computer issues. I wasted 2 hours today just figuring out that every letterhead would not open, I tried endless restarts and even a system restore but the only available date was yesterday (otherwise 9months ago) and that failed to restore for unknown reasons.
I should never have upgraded from 2007 to 365 as it's too bloated for the slate and weird problems started.
This is my work it's stopping me from doing.
Can anyone please help.

Issue with word crashing

Posted: 12 Aug 2013 06:00 AM PDT

We have been having a sporadic issue happening for months on different PC's

These PC's are running Windows 7 (we have seen it on XP machines, but we don't have many of them and they are used differently.)

 

Here is the issue.

It appears this issue is caused from opening a document from an email. (Maybe certain documents that are causing the issue as it does not happen every time.)

Word will crash and close. Once this happens, if you try to open ANY document with Word, you see the window flash open and disappear.

 

This persists until the following happens to correct the issue.

Close all open Office products. Excel, Outlook, word, etc.

Kill the OPPSVC.exe process. (Or of course reboot the computer.)

 

This will allow you to open any word document. Once the document is open, you notice Document recovery is trying to recover, one or more documents. I really think the issue lies here. It appears to me Word is trying to recover a document (or at least prompt the user for this.), but is not being presented to the user. (Maybe a message box that cannot be seen.) 

 

 

While troubleshooting I have observed the following.

-Removing all Add-ins do not seen to help.

-The problem seems to be from opening Documents from Outlook. (That appears to be a common denominator.) Most of the time the Document from the Email opens fine, but after that trying to open another document, or some type of action in an open document triggers the issue.

-Some people see this issue more than others. I am not sure if it is certain documents (Maybe old document that have been "Upgraded". Or just documents with certain features.), or just that the users do things differently (maybe they don't edit the document opened in email, or don't use the same documents, or just don't open documents in this manner as much.)

 

Any Ideas?

 

 

Disable review pane for a number of pages

Posted: 12 Aug 2013 05:29 AM PDT

How can I remove the Review Pane (Comments Column) in Word 2010 for the first few pages of my document? (not for the whole document)

Thanks

Table of Contents

Posted: 12 Aug 2013 04:26 AM PDT

When I click on  References, TOC and the dialog box appears it show "Auto 1" and "Auto 2" and neither one of them has Heading 1. I only want to use Headings 1, 2 and 3 and my document is correctly formatted with headings identified yet NONE of the 11 Chapter headings appear (they are all and the only text in Heading 1 style).  Free software can do it, so surely 2013 can? 

Table of Contents using \t

Posted: 12 Aug 2013 03:54 AM PDT

Hi

I have a document with many components - each component has 3 levels of headings and I've created tables of contents for those using \b and bookmarks, which work exactly as they should. I'm not trying to create a table of contents of each of these chapters.

I've created new quick styles for the chapter headings, and have created a ToC using \t. The table of contents is generated and the hyperlinks work - all appears as I'd like, but the hyperlinks are absolute or static links; whereas the rest of the ToC's are relative.

What I mean by that is when I mouse-over the \b ToC's, I see the usual "Current Document" tool-tip I would expect to see, and renaming the document or saving as PDF maintains this hyperlink. When I mouse-over the \t ToC, I see a tool-tip that reads "file:///c:\ etc.", pointing towards the file I'm working on. The link therefore works, provided I don't rename or move the file. It also maintains that specific link as a PDF, which is very problematic.

Please could you advise?

The following are examples of the switches I'm using:
{TOC \n \z \h \t "Section Heading,1,SubSection Heading,2,SHEQ Component,3"}
vs
{TOC \o "1-2" \h \z \u \b QMSManual}

MS Word, Find - Match Control Characters

Posted: 12 Aug 2013 01:54 AM PDT

Hello,
I'm MCT and MOS Master 2010, but i have few options can't understand it clearly, one of them ( in top of the list ), the ( Match Control Characters ) feature in Advanced Find, in MS Word.



thanks in advanced for your help

Question

Posted: 12 Aug 2013 01:50 AM PDT

I have a word document on my desktop that I want to delete. However, every time I try to delete it, I receive a dialog box that says, "The action can't be completed because the file is open in Word (desktop)." The file is not open on my desktop or anything, so I'm not able to delete my word document file.

How can I insert numbers in a long document only on selected pages?

Posted: 12 Aug 2013 01:33 AM PDT

Good afternoon! My name is Marius-Constantin Popa and I have a long Word document to which I want to insert numbers only on the pages I need. How can I do that? Thanks in advance! Have a nice day!

how do i lose the red and green underline facility?

Posted: 11 Aug 2013 10:53 PM PDT

How do I lose the red and green underline facility?

How to re-download Office Home & Student 2013

Posted: 11 Aug 2013 10:09 PM PDT

Before doing a Refresh, I'd like to be able to download Office Home & Student 2013. I'll save this file of course to an external HD. The reason I'd like to do that now is because I'm in an area for a few days with high(er) speed download speed. I just need the most simple way to do this, without burning to cd's etc.

I just need to download the file and save to MyPassport. Thanks!

How to re-download Office Home & Student 2013

Posted: 11 Aug 2013 08:22 PM PDT

I presently have Office Home & Student on my wife's laptop but am going to have to do an exciting Refresh. My question is, since I'm presently in an area where we have very fast high speed, is there a way for me to re-download the product so I can copy it over to an external HD and have it ready to put on the Laptop after the Refresh?

Office Web Apps are too slow in IE 9/10 but work great in Firefox on my system

Posted: 11 Aug 2013 08:09 PM PDT

I am on Windows 7 64-bit on an AMD quad core desktop, 4GB. I have recently started using Skydrive, but I found that the word app (later found it was all apps) was painfully slow to load, taking 45 seconds to a minute to open a new or existing document for editing. When it was open and I typed a word, it would take three seconds before the first letter appeared and then a letter would appear every second until the word was displayed, it is that slow. In task manager, iexplore.exe was at about 25% of CPU most of the time while trying to use the apps, system did not seem taxed.
This was first on IE 9 (32 and 64 bit versions). My office laptop is also Win 7 64 and IE 9 and I tried it there and it works beautifully. Fast and smooth.
For testing, I downloaded IE 10 but found it was the same issue.
To test further, I tried it with the latest version of Firefox. Strangely, it works perfectly on the Firefox browser! So that is my solution for now. I just wanted to know why I couldn't use it with IE on my system.
I know this should work well in IE, any suggestions of things to try? I tried IE in safe mode with "iexplore -extoff" to rule out conflicts but it didn't help.

Documents will not open in Word 2013

Posted: 11 Aug 2013 06:10 PM PDT

I have documents from MacMillian publishing that are support material for textbooks, that will not open on Word 2013. They all crash word 2013 on opening. 

I have spent hours on trying to solve this and have been unable too. MacMillian has been unable to fix this and because the documents work on Office 2007 and 2010, they have been not very responsive to trying to find a solution. 

Some staff members can open the documents while others on the same version and same installation of Word 2013 can not. 

Any tips or help would be greatly appreciated. 

I should mention that this is happening with all the resources associated with about 6 different textbooks which we have 300+ copies of each. So I really need a permanent solution.

Highlighting text to change to Italics, changes entire document.

Posted: 11 Aug 2013 04:10 PM PDT

When I highlight a short paragraph and change the font to Itallics, the entire document changes to Italics instead of just the highlighted portion.  The same thing happens when trying to change one paragraph to single space.  The entire document changes when I only want the highligted portion to change.

Lost Winword Files

Posted: 11 Aug 2013 02:59 PM PDT

I have a Windows 8 laptop with Word 2013 and have recently (four days ago) deleted two Winword 2013 files from my Documents folder in my libraries by sending them to Recycle Bin and then deleting them permanently from there as well. Now, I want them back. So, I wonder:

- Is it possible to recover them or have I destroyed them forever so that I should give up on them?
- If it is indeed possible, how does one do it?

My knowledge and understanding of computers is severely limited, so I am very perplexed by my problem. I am hoping someone will guide me to a solution. Presuming it's possible to recover the files because the computer doesn't erase erased files completely until it runs out of space (or so I gather), which is not the case with my laptop, I have no clue how to do it. I have made some futile attempts, though:

- I tried the searching device that one activates on the right side of the screen by holding the mouse in the top right corner and then typed in the names of the lost files in the search box, only to get no results.
- I read something about .asd files and temporary files on the Internet but have been unable to find any .asd files since I have no idea where they are supposed to be (so it is possible that they exist) and have only found useless temporary files (again, possibly because I didn't look in the correct folders within the temporary files folder, found the wrong temporary files folder or failed to recognize something as important because it was named with a weird series of numbers and letters or something such). Again, no success.
- I have read something about opening Task Manager, closing all Winword operations, and then opening Winword hoping to see some automatically recovered files, presumably the ones I have deleted, but I can't see anything from Winword running in the Task Manager and I don't see why there would be any automatically recovered files since the files I deleted were saved and unaltered until they were deleted.
- I have Command Prompt (CMD) and I know that it can be used for locating files, but I have no idea how to use it because one needs to know various commands by heart, all of which appear to me as gibberish made of letters and additional symbols. Perhaps if I knew what to type into Command Prompt, I could find the files, though perhaps there is now way to search for deleted files this way.
- I tried downloading Restoration to recover the files but I couldn't even work it. 
- Finally, I have downloaded Pandora Recovery based on some advice I have read on various forums. This has been my most successful attempt, but still fruitless. Pandora Recovery managed to locate the deleted files for me and I have extracted/recovered them to a USB in .doc form, i.e. having the file type "Microsoft Word 97 - 2003 Document". For some reason, their names have been somewhat altered and I have found more files than I had or have erased. Namely, the two files I erased were called "A naplóm 1" and "A naplóm 2". I have so far found about twenty files called "J - A naplóm (###...)", where the hashtags represent an apparently arbitrary series of numbers. Presumably, there are twenty files because may previous versions of the files have also been recovered, which is probable, since the recovered files have similar sizes, differing by several KB. However, I can't open any of these files because Winword tells me the file type is unsupported. That makes no sense to me because the recovered files have the extension .doc and I definitely have a function WinWord 2013 to open such files with, as I easily verify when opening any of my other .doc files from my libraries. The files have been encrypted with a password, if that is of any significance, but I know the password and keep entering it. I intentionally put in a wrong password to see what would happen, and I got a prompt that the password was wrong and not that the file type was unsupported. Therefore, I don't think the encryption is of any signficance. I have tried to alternatively open these lost files using NotePad and TextPad, but both programs produced a long mess of letters, numbers and additional symbols, apparently completely arbitrary. Perhaps they are some sort of code which can be converted to the original letter text, but I have no idea if that could be so and how it could be converted if it is indeed a code. 

P.S. I have not tried to open every single recovered file and the program is still recovering files (there are apparently 4 hours remaining), so maybe one of them will actually open without any such problems. I don't think it likely, though.

P.P.S. Although I opened the files with Word 2013 on my laptop, the file type of the lost files was given as "Microsoft Word 97 - 2003 Document" because my laptop is new and most of my files on it come from my previous laptop, which was Windows XP and had Microsoft Office 2003. I convert all new files I create here to 2003 types as well so that there are no discrepancies and all the icons in the list look the same. I don't know if this is of any significance for recovering the files but I have added it just in case.

Thank you in advance

Corrupted template

Posted: 11 Aug 2013 12:02 PM PDT

I have created a template for my company and somehow the file has corrupted. I have read many posts on here that people have fixed these files and was wondering if someone could help me in the process.

 

 

The link to it is here..  I am new to this and am not sure if this is at all accurate.

 

https://skydrive.live.com/redir?resid=5AA4B1DBDA283984!235&authkey=!AHIDHVAXmh4OXr4

 

 

Please help! I need this document!

 

 

 

Thank you

 

Sam

office xp will not open due to a .msp file error - Microsoft Office forums

office xp will not open due to a .msp file error - Microsoft Office forums


office xp will not open due to a .msp file error

Posted: 10 Dec 2004 05:55 PM PST

 
kbid=295823 "You receive 
message in Office 2003, 
utility to remove Windows 
try to open, repair, 
will not open, repair 

Office not avilable to all users.

Posted: 10 Dec 2004 12:40 PM PST

Thanks. I read that document and ....

I need to install office on a per computer basis instead of a per user
basis. I do not see how to do this on 2000 and XP machines, only on 98 and
ME machines. This could explain why I never saw this before the latest
upgrad, as I just recently started deploying 2000 or XP with Office XP.

The only other thing I see that may help is to turn off the "Create Windows
installer shortcuts" feature. I have not tried that yet.




"Bob Buckland ?:-)" <75214.226(At Beautiful Downtown)compuserve.com> wrote
in message news:phx.gbl... 
message news:phx.gbl... 
using 

office 
is 
minute 

to 


stand office 2003

Posted: 09 Dec 2004 09:25 PM PST

i went 2 the control panel and n dont see it in add remove..butwhen dl was
thru it said completed and the only thing ic is a lil window with the name
"officestd"...and thats what ive been clicking on ..so should i try 2 dl
again?



"Milly Staples [MVP - Outlook]" wrote:
 

office XP media content disk

Posted: 09 Dec 2004 03:15 PM PST

Ah, ok. Thanks.

"Milly Staples [MVP - Outlook]" <org>
wrote in message news:%23%phx.gbl... 


Problem with Office Assistant

Posted: 08 Dec 2004 02:58 PM PST

Bill Helbron wrote: 
This should help you

--
"*-344-*Never Forgotten"
Is for the New York City Firemen who lost their lives on September 11,2001.
The official count is 343, but there was also a volunteer who lost his life
aiding in the initial rescue efforts. And I will never forget them as
long as I live,
nor should any American.
"Mow Green"

From: "ChristineB" <microsoft.com>
Subject: RE: Solutions to Office Update Error Messages!
Date: Sunday, November 07, 2004 7:09 PM

Hi - sorry it didn't work for you - it took me several frustrating attempts
at everything MS recommended before this solution worked for me. I can't
understand why Microsoft are not addressing this issue. Having to manually
delete registry entries is not an acceptable solution. Hope you manage to
resolve your problem - can't suggest anything else I'm afraid!


"bastetm2" wrote:
 

Office 2003 Shortcut Toolbar

Posted: 08 Dec 2004 11:55 AM PST

No_One wrote: 

No you didn't - it doesn't exist.

--
Facon - the artificial bacon bits you get in Pizza Hut for sprinkling
on salads.



Office 97 + Windows XP Home

Posted: 08 Dec 2004 07:07 AM PST

In news:com,
rusty <microsoft.com> fumbled, fiddled and fingered: 


http://support.microsoft.com/default.aspx?scid=kb;en-uk;324767



--
Steve Parry BA (Hons) MCP MVP

http://www.gwynfryn.co.uk


replace Office 2003 with Office XP

Posted: 07 Dec 2004 01:25 PM PST

I'm not sure I understand...
Here a scenario: A workstation with Windoes 2K Prof and Office 2000 Prof
uses outlook. The main folder is a .pst file containing Inbox, Contacts,
etc. A new workstation is introduced with Windows XP Prof and Office 2003
Student/Teacher edition. The .pst file is copied to this new pc and Outlook
is set to use it as the main folder. I need to remove the Office 2003
student version and replace it with Office XP. Will I be able to use the
..pst file as the main folder?

"Milly Staples [MVP - Outlook]" wrote:
 

Upgrade Office 2000 to 2003.

Posted: 07 Dec 2004 01:23 PM PST

Office 2000 Series products tended to have
more applications (Photodraw, FrontPage, Small Business Tools)
from multiple CDs than the single CD Office 2003 has.

On installing Office 2003, either manually or from an
Admin Point it only replaces 'like programs' and leaves
the others. It usually will not remove the Office folders
to be sure that it isn't removing user files that someone
may have installed there. You'd need to do some cleanup
through another process if you want to yank out the old
product entirely.

Office 2003 usually puts itself into a subfolder of
a previous MS Office installation, but it doesn't
put itself into the same folder as Office 2000.
http://microsoft.com/office/ork/2003/two/ch4/DepB03.htm

The default installation point would be
<drive>:\Program Files\Microsoft Office\Office11

You can try adding the INSTALLLOCATION=
property in the Settings file (setup.ini)
(you may still get a subfolder)
but what you may want to try is doing a manual
setup from your Admin point using verbose logging
to track to see what is going on.

The MST is basically mimicing the steps you'd
take in a manual install/upgrade so you should
see the same basic results by doing a manual install
and specifying a custom location.

Be sure that you're using the same User/profile/permissions
for the manual test that you used with the MST.
It may be that you don't have permissions needed to
work with all of the folders you're calling out or
the registry.

=======
<<"postalias" <microsoft.com> wrote in message
news:com...
Yes I am using the Volume license product. The process does not require a
previous product for upgrade validation, however when installing Office 2003
it check to see if a previous version exists, and then will upgrade/migrate
accordingly. I have set the MST file to remove all previous versions,
however it does not actually remove all of the office 2000 componenets (tracs
are left), and does not remove the the off2000 folder it was prreviously
installed in. I have read several articles on the process of removing Office
2000, however there is no defined method that fully removes the product.

Not to sure where to go from here. >>
--
Let us know if this helped you,

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx



Workgroup Templates

Posted: 07 Dec 2004 06:51 AM PST

I am trying to do the same thing. Tried using Custom Installation wiz
but couldn't find option for default Workgroup Template location. Let
me know if you find anything

Office97 install on WinXP machine?

Posted: 05 Dec 2004 07:35 PM PST

On 09/12/2004 garfield-n-odie wrote:
 


Hi garfield

Many thanks for that.

What seems to happen is that if you try to install the HTML editing
option the install actually bombs out, leaving some needed files
missing, not setting up the menu and not rolling back. Still it's 7/8
years old now :-)

I re-installed, excluding HTML editing, and both SP's went on OK.

It's not worth upgrading to a later version for me since 97 does all I
need it to.

Thanks again :-)

--
Jeff Gaines Damerham Hampshire UK
Posted with XanaNews 1.16.5.2 http://www.wilsonc.demon.co.uk/delphi.htm

Automated Install using batch file

Posted: 02 Dec 2004 06:11 AM PST

Hi Daniel,

If you're creating an Office Admin point you
can apply the Service Release (not service pack) SR1
and then Service Pack (SP) 3 to the Admin Point and
then deploy from the updated Admin Point as one method.

========
<<"Daniel" <microsoft.com> wrote in message news:com...
Good morning,

I'm trying to install MS Office 2000 Premium and the service packs using a
batch file to automate the process. Below is the code that I'm trying to
debug:

\\cdiptc-app\sw$\ms\office2kprem\setup.exe
TRANSFORMS=\\cdiptc-app\sw$\ms\office2kprem\2003-08-25.MST /wait /qn+
\\cdiptc-app\sw$\ms\office2ksp1a\setup.exe /qn
\\cdiptc-app\sw$\ms\office2ksp3\O2kSp3.exe /q

The problem that I'm having is the fact that it installs Office and service
pack 1a and then reboots and never installs service pack 3. Could someone
please show me what code will work to install both service packs before
rebooting?

Thank you,

Daniel>>
--
Let us know if this helped you,

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx


What should be put into a duration? Microsoft Project

What should be put into a duration? Microsoft Project


What should be put into a duration?

Posted: 09 Oct 2004 07:52 AM PDT

Hi Aniki,

You've just added additional detail about your situation....and it changes
everything!!

First...have you assigned resources on the Summary Task? If so, it would be
best to remove them and assign them on the detail tasks only.

You say that you would like one resource to complete "one Summary Task
before moving onto the next one". This implies that one resource will be
exclusively assigned to all of the detail tasks under that particular
summary. At the same time, you also say that you've applied all 5 resources
to all 40 summary tasks. Could you clarify this question: If you were to
assign resources to the detail tasks, would there be more than one resource
on each of the detail tasks?

You have stated a "preference" as to how the work should be executed. Here's
how:

1. You can force Project into completing all the tasks under one summary
before going onto the tasks of the next summary by applying a "Priority"
number to each task, and then use Resource Levelling. This is the recommended
method.

2. Another crude, but reasonably effective, way is by linking the individual
tasks that are relevant to each person, in the order that you would like them
to be done (Ok, I'm going to get shot by some of you.). However, if you start
doing the work out of sequence, you have to faff-around with amending the
logic links. This can be a real pain in the bum!

HTH.

James.G

"aniki" wrote:
 

Format Field Name size

Posted: 08 Oct 2004 05:55 AM PDT

You are most welcome Dan. Glad to know you solved the
problem.
Julie 
the 
increase 

Copying Linked Project Files

Posted: 07 Oct 2004 10:22 AM PDT

Thanks Jack! It worked wonderfully!

Roland

"JackD" wrote:
 

MS Project cannot resolve overallocation for a resource

Posted: 06 Oct 2004 01:21 AM PDT

Hi,
Many thanks for your assistance. I created a two-task test project and
encountered the same problem (I guess I should have tried this test first).
The problem was that the "level only within available slack" box was checked
(something I must have done unintentionally as it states the default status
is cleared).
Thanks,
Mark

"Jan De Messemaeker" wrote:
 

Microsoft CRM - OT: This week I will mostly becoming a.....

Microsoft CRM - OT: This week I will mostly becoming a.....


OT: This week I will mostly becoming a.....

Posted: 20 May 2004 03:46 AM PDT

flashgorman com says... 

Right on brother, bring back Bob that's what I say.

--
Chris (comX) Remove X's for address
CBR1000FL The Honda Fatblade
Yam RS200 Transcontinental Tourer

Returned e-mail not captured by the CRM

Posted: 20 May 2004 02:21 AM PDT

The Exchange Email Router is installed in the our unique
Exchange server.

How can I configure the Router?

Thank you
 
Email Router for CRM as been installed on the appropriate
Exchange server(s), if so, as it been configured correctly. 

What Experience Installing CRM on SBS2003?

Posted: 19 May 2004 09:54 PM PDT

Unfortunately this is the link to SBS2000 not 2003....



"Martin Gallagher" <com.nospam> wrote in message
news:com... 
running CRM v1.2 on SBS 2003. Hope it helps: 
http://www.microsoft.com/technet/prodtechnol/mscrm/mscrm1/deploy/15_sbsrv.mspx 


Time Stamp Issues

Posted: 19 May 2004 03:14 PM PDT

Thanks Matt,
On the CRM front end thats correct, but when looking at
the SQL tables its not. I am a user in EST but when I
create a reccord and then view the reccord in SQL the date
appears 4 hours ahead (ie 8am is Noon). When I look at
the reccord in CRM it shows the correct date.

 
GMT in the DB. They are 
appropirate time for the 
<microsoft.com> 
show 
is 

Announcements Permissions

Posted: 19 May 2004 12:51 PM PDT

Oddly enough, I had found this before, but the role (CEO-
Business Manager) already has this write privilege, yet
Announcements were not available, to the lone individual
who has this role, in the Settings window. The only way I
have been able to resolve this is by giving that user a
System Administrator role, which does not leave me with a
warm and fuzzy feeling.

 
roles 
announcements 
to the news items 
in message 
to 
to 
so, 
just 

CRM 1.2 and importing LEADS from CSV

Posted: 19 May 2004 12:27 PM PDT

Hi,
Quite new to MSCRM myself, but I've encountered problems when the a field
in the CSV is in the wrong format for the destination field in CRM.

For example, you've mapped email > email when email in the CSV contains a
phone number.

Not sure if this is the problem...

XP with CRM

Posted: 19 May 2004 12:13 PM PDT

no you definately do not need to keep up with updates on XP. Its a wise move
to keep up with security updates but application updates are your choice. it
would be a good idea though to make sure everyone has the same updates just
to make your job easier




"Steve Abey" <com> wrote in message
news:f51c01c43dd5$63a36ec0$gbl... 


IIS Reset

Posted: 19 May 2004 12:00 PM PDT

Start- run - iisreset
or
go to servises and restart.
anyting else!!
 

Disk 3

Posted: 19 May 2004 11:47 AM PDT

Hi:

Yes, the SDK is here:

http://support.microsoft.com/default.aspx?scid=kb;en-us;821670

John.

<microsoft.com> wrote in message
news:f5e001c43dd4$0dd48890$gbl... 


Exchange Mail Router with SMTP Relays

Posted: 19 May 2004 10:15 AM PDT

Hi:

Some input:

Q) Does the CRM e-mail router installed on all Exchange servers work
although there are SMTP Relays receiving the e-mails before the Exchange
Servers do? I guess so but I want to confirm.

A) The CRM email router will create activities for any CRM related incoming
or outgoing email that is using SMTP. I have seen that as long as the mail
being passed is SMTP mail the activities are being created successfully.

Q) Will the CRM e-mail router slow down the e-mail process on the Exchange
Servers since they are handling 1400 users receiving lots of emails per day?

A) The email router will not slow down the operating of the Exchange router
given it has the appropriate hardware specifications. The CRM email router
sits on top of the Exchange server and sniffs the subject line for a GUID
that is linked to associated records and when one is detected the CRM email
router will create the activity. You mentioned that the Exchange server is
routing emails for 1400 users, is there only

1 individual Exchange server or multiple exchange servers? How many of the
users are CRM users?

Q) What would you suggest, a sub-domain?

A) This would depend on how the individual company wishes to set up the CRM
environment, I would not say that it is recommend to set up a sub-domain.
This would most likely depend on the specific set up of the Exchange servers
on a given domain structure.

Here is an addition from TK 28110: "Location where the Microsoft
CRM-Exchange E-mail Router should be installed"

http://mbs.microsoft.com/TechKnowledge/techknowledge.asp?print=true&id=2

8110&code=7842

The Microsoft CRM-Exchange E-mail Router must be installed on the Microsoft
Exchange Server that is sending and/or receiving e-mail messages. If there
are Microsoft CRM users on multiple Microsoft Exchange servers, then the
Microsoft CRM-Exchange E-mail Router must be installed on all the Microsoft
Exchange servers that are sending or receiving e-mail messages via Simple
Mail Transfer Protocol (SMTP). The Microsoft CRM-Exchange E-mail Router does
not need to be installed on a Microsoft Exchange Server that only stores the
mailboxes of Active Directory users and Microsoft CRM Users.



John.

"Sylvain Belanger" <com> wrote in message
news:phx.gbl... 
day? 


can't find the front door

Posted: 19 May 2004 09:16 AM PDT

I am new too.
That was last weeks question...lol
Try http://[ur crm's IP]

I do it this way http://192.168.x.x

That launches the login window. MAKE SURE POP UP blockers
is OFF.

CRM needs to pop up...

 
it. 
to server. 
Unlike Word or 
the Dummies book 

Migrating CRM and Customizations

Posted: 19 May 2004 06:03 AM PDT

"John O'Donnell" <com-nospam> wrote in message news:<phx.gbl>... 

Thanks. That looks good. What if I only want to migrate my
customizations ? Should I just install CRM then import the
customizations from the development machine's EXport ?

Mapping picklist fields

Posted: 19 May 2004 03:36 AM PDT

Each pick list name is actually mapped to a numerical value in another
table. You need to verify that all of your pick lists are actually
created in the same item order, or go back and rename each value entry
with the correct name.

It doesn't matter what order you arrange them in after the fact, just
that value # equals the same name across your pick lists that you need
to be the same.

Hope that help.

Carl


On Thu, 20 May 2004 16:19:26 +0800, "Luke Baines"
<com.au> wrote:
 

CRM Email not working

Posted: 18 May 2004 07:01 AM PDT

Thanks Alfred for your reply.

Can you give me a link on the partnersource where I can
find this documents?

Thanks in Advance

Jose 
external from crm? 
80 to any other 
you can find the 
der Inhalte in 
Newsbeitrag 
email 
message 

Please help me get hotfix from mbs.microsoft.com

Posted: 18 May 2004 05:36 AM PDT

I also need it. I can not find it over there... (hotfix 834859) Can anybody help me?

"John O'Donnell" <com-nospam> wrote in message news:<phx.gbl>...