Pages

Search

Microsoft Word - How does one find the "Define New Multilevel List" dialog box?

Microsoft Word - How does one find the "Define New Multilevel List" dialog box?

How does one find the "Define New Multilevel List" dialog box?

Posted: 09 Aug 2014 11:49 AM PDT

Microsoft Word 365 Font Malfunction

Posted: 09 Aug 2014 11:45 AM PDT

When I convert the font to an Arabic dotted font , the whole document becomes disfigured! It also results in Microsoft Word operating slowly!


This wasn't happening before I formatted my computer. Since formatting it I've reinstalled office and now experiencing this fault.

Here's a screenshot:

Printing with Book fold option - errors

Posted: 09 Aug 2014 09:04 AM PDT

Trying to print but get Error with Settings, margins, columns, or paragraph indent too large.  Margins are at 0, don't have any columns and don't think it's paragraphs.  Please help!  I've tried every margin combination I can think of.

Bookmark option in SEQ field

Posted: 09 Aug 2014 07:34 AM PDT

Hello,

in the SEQ field there is the option of using [Bookmark].

yet I can't figure out what to expect.

A. The SEQ refers to an existing bookmark. So it is a reference to a bookmark and a SEQ field.

Let's say I have a bookmark 'TEST1' defined (some text in the document). Maybe putting the bookmark in the sequence makes it possible to reference the bookmark. E.g. if i ctrl+click on the SEQ field I would go to the bookmark.
Problem: No 'ctrl+click' tip field is shown when my mouse hovers over the seq field. If i ctrl+click it nothing happens.

B. The SEQ is the bookmark. So it is at the same time a bookmark and a SEQ field.

Problem: if I give the SEQ a bookmark name (e.g. SEQ MySeq \* ARABIC NewBookmarkName)  I get: Error! Bookmark not defined.

So now I'm wondering what is the use of the bookmark option in the SEQ field and how to use it?

Thanks for any advice!

Bart

Spelling in Office 365 Small Business Premium not working

Posted: 09 Aug 2014 06:36 AM PDT

After converting office from Office 365 ProPlus to Office 365 Small Business Premium spelling started not working. On the other hand grammar checking continues working. Proofing settings in Office is correct. Language files for proofing is already installed.

Please advise a solution.

Thanks,

Selim

Online pdf files?

Posted: 08 Aug 2014 10:34 PM PDT

I go to a website and it will have a form I need. It's a PDF form. I can't type anything into the form. I have to download and then print it and then hand write the info in it. I want to be able to type the info in.

How do I convert this to a document that I can type into? I have Office Suite 2003.

Recover file from a USB

Posted: 08 Aug 2014 09:18 PM PDT

I've just lost my USB and I cannot find it. Unfortunately, I didn't save the file onto my PC, just onto my USB.

Is there anyway I can retrieve the file if I don't have access to the USB? I only have access to the computer I was typing the document on

Uppercase menus

Posted: 08 Aug 2014 05:51 PM PDT

HOW TO REMOVE IDIOTIC UPPERCASE MENUS???? DON'T TELL ME THAT I NEED TO RENAME EACH AND EVERY ONE OF THEM!!!! OR LOAD SOME СРАНЫЙ PRESET, WHICH DOESN'T RENAME ALL ITEMS.....             

Destination Formatting Not Available

Posted: 08 Aug 2014 05:41 PM PDT

My paste options do not include destination formatting.  I only have Keep Source Formatting, Merge Formatting and Keep Text Only. This is very frustrating as I am trying to copy and then paste the information into a template with a specific style and formats.

Any suggestions?

Thank you.

Differences in Word Counts

Posted: 08 Aug 2014 04:12 PM PDT

Two places claim to display Word count.

1.  In the document.  Lower left, next to the page number.  This display appears to be working.  Deletions show up as, example: 21/159,310 then drop 21 words.  The math does appear to add up while working.

2.  In the folder list.

Select view --> Add Column --> Word Count and BAM! you have a word count listed alongside the defaults: document name, date modified, type, and size.

Problem.

Full MS, in the open document: 308,217 words

On the document list, in the open folder: 251,037 words

Question.

Which number is the correct word count?  This is a necessary number for any MS submission.

Of note.

There is a header in the document.  But, even if those words are being counted, ~6k total in the headers does not explain the 57,180 word count difference between the two totals.

Missing Office applications icon

Posted: 08 Aug 2014 11:30 AM PDT

Original title: Office icon

How do I get the Office icon on my desktop?  I had an Office icon but it always took me to the setup page.  I've used both office and excel so I have the download already.  I can only get to there by selecting an old document and then selecting New.  Thank you, Jess

MS Office Word 2003 - Document failed to recover changes

Posted: 08 Aug 2014 06:07 AM PDT

I came into work today to discover the my workstation had been rebooted (most likely a forced reboot to apply security updates, but with no real warning the day before). This always vexes me as it closes everything I had been working on, including updating a document in MS Office Word 2003. Of course this has happened before so I always save every few minutes, generating TMP files, until I eventually close the document.

This time however, when I opened the document I expected to see a "recovery" request, but there was none. The ~name.doc version of the original file and several TMP files are occupying teh documents directory. Is there any way for me to recover my changes...?

Microsoft CRM - Reinstall SFO Client

Microsoft CRM - Reinstall SFO Client

Reinstall SFO Client

Posted: 17 Mar 2005 10:57 AM PST

Hi,

another thing worth trying: search for the file "MSCRM.PST" on the client
machine and delete it. This one is not always removed during uninstall.

Greetings
Michael


<com> schrieb im Newsbeitrag
news:googlegroups.com... 

Direct SQL Update

Posted: 17 Mar 2005 10:13 AM PST

The other caveat here is whether or not you are talking about the builtin
territory support or a cusom field you added to "flag" the territory. I'd be a
little careful about updating the built-in Sales Territory membership through
direct SQL. Anytme there is a GUID involved, I get a little hesitant.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 17 Mar 2005 18:20:33 -0000, "Peter Lynch"
<com.SPAMFREE> wrote:

It will be OK if you're careful; but safer and possibly easier would be to
define a manual workflow to set new sales area, which will be easy to apply
to 200 accounts if you can select them based on some criteria in Advanced
Find


<com> wrote in message
news:googlegroups.com... 

gettings errors when closing opportunities

Posted: 17 Mar 2005 08:23 AM PST

Awesome!! That was it exactly!! If we entered a value of zero for the
estimated revenue it went thru fine. It also goes thru if we select "System
Calculated" instead of "User Defined" for the estimated revenue. Thanks a
bunch!

"RB" wrote:
 

MessageLabs Anti-Spam and CRM EMails

Posted: 17 Mar 2005 07:21 AM PST

Then sounds like they need to research how to define rules in MessageLabs. If
they can define a rule to allow emails from none recipients or maybe by looking
at the pattern in the CRM subject line, but the burden is on MessageLabs to
allow it through.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 17 Mar 2005 19:49:29 -0000, "Peter Lynch"
<com.SPAMFREE> wrote:

No, much worse; the problem is the sender domain ie the CRM organisation;
whenever they recieve a reply to a CRM email, it will be trapped by
MessageLabs

Ouch!


"Matt Parks" <com> wrote in message
news:com... 

Outlook Email

Posted: 17 Mar 2005 04:07 AM PST

CRM Users can set their profile to route all inbound email into CRM. It will
then resolve based on their email address. However, this isn't typically
recommended since then all email (even personal) will end up in CRM. If they
are using the SFO client, they can promote individual emails to CRM.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 17 Mar 2005 12:13:05 -0800, Colin Emmett
<microsoft.com> wrote:

Thanks for you response.

How about incoming email, if a customer sends a new email which is not a
response to a CRM email, is it possible for the router to capture this and
link to a contact if a matching email address is found.


"Matt Parks" wrote:
 

Problem with the first use of the deployment manager

Posted: 17 Mar 2005 01:31 AM PST

You can't use the User Manager to add a license to a use that is already in CRM.
It is used to add users to the system only. To maintain a user that is already
in the system, you need to do it through the web interface.

The admin user needs to have alicense associated wtih it prior to using user
manager to add additional users. Also, depending on the nature of your AD
environment, not all users will apprear in the list due to properties that the
utility is looking for that aren't always there on accounts that have been
migrated from an older domain.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 18 Mar 2005 00:59:03 -0800, "Michael MARTIN"
<microsoft.com> wrote:

Thanks for you response!

Yes the administrator account was used to install the app, and I know the
procedure to add a licence to a user (and in particular to the
administrator). But the problem is that, when I log-on to the User Management
the list of users is empty!
And I don't manage to enter the Web Interface of MS CRM using that account.

Even without license, the administrator account should appear in the Users
Management listing no?

Thanks for advance :)
Michael


"Matt Parks" wrote:
 

Cuztomization wont work with Outlook client

Posted: 16 Mar 2005 11:39 PM PST

I checked, and sync is made ok..
Any other reason why it wont work?

-Woltore

Callout didn't work on non-admin user

Posted: 16 Mar 2005 11:35 PM PST

Bingo - Peter beat me by a few hours I guess. I have seen this many times
where the file can't write based on the permissions. And the errors that the
postcallout throw, if any, don't lead you in this direction.

Hope this gets you over the hump!

"Peter Lynch" wrote:
 

Customised Tabs & Forms

Posted: 16 Mar 2005 01:07 PM PST

AS I mentioned before, that isn't supported in the current release. CRM 2005
will offer some additional features in this direction though.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 17 Mar 2005 06:39:07 -0800, CRM integration
<microsoft.com> wrote:

Thanks for the response.
I tried using ISV.Config to add vertical Narbar on the left sife.
It works fine.
I am trying to perform the samething on Horizontal tab on the top of the
forms.


Thanks.


"Matt Parks" wrote:
 

Idiots Guide to Post Callouts

Posted: 16 Mar 2005 05:27 AM PST

I'm afraid that if you do not have any coding experience, you will find the
world of post-Calouts extremely difficult to master. Not saying you can't do
it, but the coding background is a hurdle that you need to overcome.
Post-callouts are very finiky and there are alot of small things that can be
done incorrectly with them. I'm afraid you will end up spending a lot of time
trying to work with them that would have been reduced if you had the dev
background with the core .Net platform.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On 18 Mar 2005 04:38:18 -0800, "Bouffont" <com> wrote:

Hi John,

Yeah I've seen those articles, although I'm still stuggling as they
seem to assume you have at least some coding exp.

Right then, I'm going to set myself a tast, I'm going to sit down today
and see if I can make head or tail of them, if I can I'm going to try
to write an idiots guide which I'll then post in here and people can
add to etc!

Let's see what I can come up with, in the mean time please feel free to
add any helpful comments everyone!

Tom

John O'Donnell wrote: 
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmbscrm1_2/html/mbs_crmpostcalloutsv1d2.asp 
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/CrmSdk1_2/htm/v1d2creatingacrmpostcalloutobjectusingvisualstudio .asp 
complexities of 
that 
one 
what 
more 
the 
request!!! 

SFO issue

Posted: 15 Mar 2005 09:51 PM PST

Hi Nathan,

Thanks for the post and thanks for posting the resolution!

Kind regards,

Mike Christl

This posting is provided "AS IS" with no warranties, and confers no rights.
You assume all risk for your use. © 2005 Microsoft Corporation. All rights
reserved.

Cannot add columns to custom views

Posted: 15 Mar 2005 02:35 PM PST

Hi Christian,

Thanks a lot for the post.

A reboot of the server is a good idea, it could clear a cache that is
holding corrupted forms. Are there any errors in the event log?


Mike Christl

This posting is provided "AS IS" with no warranties, and confers no rights.
You assume all risk for your use. © 2005 Microsoft Corporation. All rights
reserved.

CRM services suddenly not working

Posted: 15 Mar 2005 01:19 PM PST

John,
THanks for replying. All CRM services and SQL services are running.
When I modify the web.config (as someone mentioned on here) I get the
following error message from the web browser:

Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information about
the error and where it originated in the code.

Exception Details: System.Runtime.InteropServices.COMException: Unspecified
error

Source Error:

An unhandled exception was generated during the execution of the current web
request. Information regarding the origin and location of the exception can
be identified using the exception stack trace below.

Stack Trace:

[COMException (0x80004005): Unspecified error]
Microsoft.Crm.Platform.ComProxy.CBizUserClass.WhoA mI() +0
Microsoft.Crm.Security.UserCache.GetCurrentUser(Ca che cache, String
username) +227
Microsoft.Crm.Security.UserCache.GetCurrentUser(Pa ge page) +72
Microsoft.Crm.Application.Controls.AppPage.OnLoad( EventArgs e) +104
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +750

Any ideas?
Thanks

"John O'Donnell" wrote:
 
Subscribe to: Posts (Atom)