Pages

Search

miltple access to OWA - Microsoft Exchange

miltple access to OWA - Microsoft Exchange

miltple access to OWA

Posted: 25 Apr 2008 02:27 AM PDT

Thank you Arnold is working as a charm. By the way I've gave USER2 full
access to USER1 mailbox

"Mark Arnold [MVP]" wrote:
 

rpc https

Posted: 23 Apr 2008 02:59 AM PDT

On 23 Apr, 15:38, jogdial <com> wrote: 

Just as a final reply to this here problem... it wasn't quite magic
after all. I had changed from NTLM to Basic authenication in the HTTP
proxy settings, and don't think I restarted, or something and didn't
really try again until the following day, but which time I had
properly shut down Outlook and restarted and it worked.

My firewall, or somerhing could be causing this, but also these
computers are working remote and not part of the domain, so that
could also be problems.

It this case, as I have a store bought cert and have it requires SSL,
the only downside is typing in my creds when I start up outlook. I
can live with that, nice to finally figure what the problem was for
future references. Love not having to fire a VPN up everytime I want
to check my email now.

Cheers

Recipient in header

Posted: 21 Apr 2008 01:59 AM PDT

com wrote: 

B = blind. You can't see this anywhere.

Blackberry Server on Exchange Server

Posted: 18 Apr 2008 02:47 PM PDT

Thanks Lanwench

"Lanwench [MVP - Exchange]" wrote:
 

recieving too many NDR messages without sending emails

Posted: 18 Apr 2008 12:50 AM PDT

Just like Lanwench said, there is no way to block these specific NDR's while
letting in other, legitimate NDR's.

The problem lies in the SMTP specifications, the people who originaly
designed SMTP didn't take into consideration all of the nasty things people
would want to do with email, including spoofing a FROM address. Over the
past few years there have been some attempts to fix this with things like
SPF/Sender ID, and others, but until the *entire* Internet adopts these
solutions and uses them constantly FROM address spoofing is here to stay,
which means that NDR backscatter (that's what it's called when you get the
NDR even though you didn't send the original email) is also going to continue
to be a problem.

One thing I've noticed on Exchange discussion boards and email lists, this
NDR backscatter problem seems to have really picked up over the past month or
two, I suspect some spam operation has been running a massive spam campaign
using a large list of legit email addresses to spoof the FROM address.

"Lanwench [MVP - Exchange]" wrote:
 

One Calendar invite goes to several users, not by choice.

Posted: 17 Apr 2008 11:22 AM PDT

Ed,

Yes, did those things.

--
Manlytrash


"Ed Crowley [MVP]" wrote:
 

EXCH 5.5 to E2K3 Migration ADC

Posted: 17 Apr 2008 11:02 AM PDT

Thanks for the reply. I am really confused now. I have read the
understanding and deploying Exchange ADC doc. It said that you can have a
single CA for mulitple domains. Does that mean that I would have mulitple
CA's for each domain? Remember the I am in the parent domain, there are
transitive trusts between them and the child domains. The E5.5 server is
also in the parent domain, so everything is local to me except the remote
DC's. Please tell me there is another way....

Thanks for your assistance.

By the way is the ADC for Exchange 2003 Sp1 supported by MS??

"Ed Crowley [MVP]" wrote:
 

Outlook Web Access 403 in Public Folders

Posted: 16 Apr 2008 03:40 PM PDT


Me, neither. Your problem seems rather unique. I think you're going to
have to call MS on this one. If you do, it would be great to hear the
solution.

"Catfish" <microsoft.com> wrote in message
news:com... 

Outlook Web Access Parameters

Posted: 16 Apr 2008 03:36 PM PDT

Wow, thanks. Now I just have to convince my server guy to change that .js file.

That is great.

Cheers,
Lara

"Lee Derbyshire [MVP]" wrote:
 

email routing

Posted: 16 Apr 2008 02:16 PM PDT

I try to make it short and clear:
- Yes, we do have 3 MX records and all of them are accessible - there is no
problem here
- problem is that we had so far 2 instances where email from external domain
(2 different domains) sent to us was bounced to original receipient, when we
as the other end domain to involved their IT as we cannot troubleshoot their
end problem (to some extend only) they discovered that their exchange server
was trying to do smtp conection to our public website IP
- our public website IP is different then our MX IPs, this particular IP
they were trying to connect never had MX record for our domain

does this make more sense? basicaly their mail server is trying to exchange
email with our public webserver.

if this is still not clear here it is again

IP 1 - has MX, A and PTR record - mail server
IP 2 - has MX, A and PTR record - mail server
IP 3 - has MX, A and PTR record - mail server
IP 4 - has A and PTR record - web server


2 different domains recently had instances where their exchs were trying to
send email to our webserver (IP4) how??! there is no MX record. Those orgs IT
also confirmed that if they do nslookup for our domain MX records, there is
no IP4 listed anywhere... odd part is that in both of this instances email
was orginally sent to group of people and bounced back as NDR only for our
domain, sender then forward same message this time only to receipients from
our domain and all works ok!

I would say it is DNS issue but how this is possible? where their exch
server is getting this from and again we never ever had MX for this IP
address (IP4 webserver)



"Ed Crowley [MVP]" wrote:
 

Restoring Information Store to an Alternate location

Posted: 16 Apr 2008 08:19 AM PDT

Thanks for the info. RSG is probably a project I can get into next, but at
the very minimum, I just want to restore Exchange database files to another
folder location on the same server from the original NTBackup .bkf file.
When this happens, just want to be safe that these restored files doesn't
take the place and overwrite the current production files. Any thoughts?
Thanks!

"Archi3" wrote:
 

Can't send mail to various ext email addresses with Exchange 2007 with Error: 450 4.5.0 No recipient succeeded

Posted: 16 Apr 2008 06:27 AM PDT

Hello Hobbe,

Thank you for your reply.

I understand that you will check the settings soon.

If there is anything I can do for you, feel free to let me know.

Best regards,

Manfred Zhuang(MSFT)
Microsoft Online Newsgroup Support

Get Secure! - www.microsoft.com/security

================================================== ===
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
================================================== ===

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Reply-To: "Hobbe" <nospam>
| From: "Hobbe" <nospam>
| References: <phx.gbl>
<phx.gbl>
| In-Reply-To: <phx.gbl>
| Subject: Re: Can't send mail to various ext email addresses with Exchange
2007 with Error: 450 4.5.0 No recipient succeeded
| Date: Fri, 18 Apr 2008 08:57:34 +0200
| Lines: 195
| Organization: Export
| MIME-Version: 1.0
| Content-Type: text/plain;
| format=flowed;
| cht="iso-8859-1";
| reply-type=original
| Content-Transfer-Encoding: 7bit
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Windows Mail 6.0.6000.16480
| X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6000.16545
| Message-ID: <phx.gbl>
| Newsgroups: microsoft.public.exchange.misc
| NNTP-Posting-Host: stoex01.swedishtrade.se 62.84.193.50
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSF TNGP06.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.exchange.misc:7152
| X-Tomcat-NG: microsoft.public.exchange.misc
|
| Thx for your reply, I will check these suggestion. But I think it can
have
| something to do with the FQDN and I tink we must regenerate a new
| certificate.
|
| Regards,
| Hobbe
|
| "Manfred Zhuang [MSFT]" <microsoft.com> wrote in message
| news:phx.gbl...
| > Hello Hobbe,
| >
| > Thank you for posting here.
| >
| > From your post, I understand that your mail server cannot send emails to
| > various email domain.
| >
| > I suggest you check following setting to see if it helps:
| >
| > Suggestion 1: Checking Recipient Policies
| > ================
| > 1. Click Start, point to All Programs, point to Microsoft Exchange, and
| > then click System Manager.
| > 2. Expand Recipients, and then click Recipient Policies.
| > 3. In the right pane, right-click the Default Policy, and then click
| > Properties.
| > 4. Click the E-Mail Addresses (Policy) tab. Make sure the recipient
| > policies are correct.
| > 5. Click OK, click Yes, and then click Yes.
| > 6. Quit Exchange System Manager.
| >
| > Suggestion 2: Check if the PTR record is correct
| > =======================================
| > Please contact your ISP to check if the PTR record for your mail server
is
| > correct.
| >
| > Suggestion 3: Check the FQDN set for the SMTP virtual server:
| > =================================
| > Please check if the Fully-qualified Domain Name is correct for the SMTP
| > virtual server.
| >
| > Suggestion 4: Contact the problematic domain's administrator to check
the
| > block list
| > ================
| > In order to keep track of the troubleshooting, I suggest you contact the
| > problematic domain's administrator to double confirm that your IP
address
| > and domain name are not in their block list.
| >
| > Suggestion 5: Temporarily disable Antivirus and firewall
| > =========================================
| > Please temporarily disable Antivirus and firewall software and then
check
| > if the issue persists.
| >
| > I hope the above information is helpful to you. If the problem still
| > occurs, please help me gather following information:
| >
| > 1. Please telnet the receiving domain's server and try to send an email
by
| > using the problematic email domain and let me know the result.
| >
| > Please refer to the following article for detailed steps:
| >
| > XFOR: Telnet to Port 25 of IMC to Test IMC Communication
| > http://support.microsoft.com/?id=153119
| >
| > Please capture screenshots of all the error messages.
| >
| > 2. Please let me know your email domain. You may send it to me by
sending
| > an email to com.
| >
| > 3. Please enable SMTP log first, reproduce the issue, then send the log
to
| > com:
| >
| > NOTE: Please let me know the recipient's email address and the sender's
| > email address.
| >
| > a. Open Exchange System Manager. Navigate to
| > Servers\ServerName\Protocols\SMTP\Default SMTP virtual server.
Right-click
| > it and choose 'Properties'.
| >
| > b. In General tab, check 'Enable logging' option. Click 'Properties'
| > button, enable *ALL* logging options in 'Advanced' tab.
| >
| > c. Click 'OK' to close the dialog box. Restart the SMTP virtual server.
| >
| > d. Reproduce the problem (send e-mail through external account). Wait
for
| > 10~20 minutes.
| >
| > e. Go back to the server. Open Windows Explorer and navigate to
| > %systemroot%\system32\logfiles\smtpsvc1\ Gather the log file and send
it
| > to
| > me.
| >
| > Please try the above steps at your earliest convenience. If you have any
| > concern, please feel free to let me know.
| >
| > Best regards,
| >
| > Manfred Zhuang(MSFT)
| > Microsoft Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > ================================================== ===
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
| > the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
| > doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| > ================================================== ===
| >
| > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| > --------------------
| > | Reply-To: "Hobbe" <nospam>
| > | From: "Hobbe" <nospam>
| > | Subject: Can't send mail to various ext email addresses with Exchange
| > 2007 with Error: 450 4.5.0 No recipient succeeded
| > | Date: Wed, 16 Apr 2008 15:27:41 +0200
| > | Lines: 37
| > | Organization: Export
| > | MIME-Version: 1.0
| > | Content-Type: text/plain;
| > | format=flowed;
| > | cht="iso-8859-1";
| > | reply-type=original
| > | Content-Transfer-Encoding: 7bit
| > | X-Priority: 3
| > | X-MSMail-Priority: Normal
| > | X-Newsreader: Microsoft Windows Mail 6.0.6000.16480
| > | X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6000.16545
| > | Message-ID: <phx.gbl>
| > | Newsgroups: microsoft.public.exchange.misc
| > | NNTP-Posting-Host: stoex01.swedishtrade.se 62.84.193.50
| > | Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSF TNGP06.phx.gbl
| > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.exchange.misc:7120
| > | X-Tomcat-NG: microsoft.public.exchange.misc
| > |
| > | Hi,
| > |
| > | Our Edge do not send mail to various external email addresses. I have
| > | checked our DNS records MX etc and the domains we are trying to send
to
| > and
| > | it looks fine.
| > |
| > | The error is below (I have replaced all addresses with x)
| > |
| > | Identity: stomail04\223940\808549
| > |
| > | Subject: This is a testmail
| > |
| > | Internet Message ID:
| > | <xx.se>
| > |
| > | From Address: se
| > |
| > | Status: Retry
| > |
| > | Size (KB): 4
| > |
| > | Message Source Name: SMTP:Default internal receive connector STOMAIL04
| > |
| > | Source IP: ...
| > |
| > | SCL: -1
| > |
| > | Date Received: 4/16/2008 8:59:07 AM
| > |
| > | Expiration Time: 4/18/2008 8:59:07 AM
| > |
| > | Last Error: 450 4.5.0 No recipient succeeded
| > |
| > | Queue ID: stomail04\223940
| > |
| > | Recipients: ua
| > |
| > |
| >
|
|

system administrator undeliverables

Posted: 15 Apr 2008 12:17 PM PDT

Thanks for the response. Yes, allow NDR's is unchecked, as far as I know you
cannot use recipient filtering with system admin ndr's. I could try the
tar-pitting, but again I'm unsure that that will work for system admin ndr's.
But I'll try it. Thanks

"Ed Crowley [MVP]" wrote:
 

Will Exchange 2007 help with delays

Posted: 15 Apr 2008 10:09 AM PDT

No worries. Oliver do you have any reccomendations. Thanks

"John Oliver, Jr. [MVP]" wrote:
 

Exchange Relay

Posted: 14 Apr 2008 05:10 PM PDT

Thanks Bharat


"Bharat Suneja [MSFT]" wrote:
 

Exchange 2007 Rollups

Posted: 14 Apr 2008 04:58 PM PDT

Here you go
http://support.microsoft.com/?kbid=945684


"Ry" <com> wrote in message
news:googlegroups.com...
On Apr 14, 7:05 pm, "Martin Blackstone" <com> wrote: 

Is there a KB article for that rollup? (I think MSFT's support search
is acting strangely again, as it does from time to time.)

Exch. 2007 Migration Question

Posted: 14 Apr 2008 09:30 AM PDT

Thanks James,

That's what I was looking for!


Clayton


"Jamestechman" <com> wrote in message
news:googlegroups.com...
Yes install your CAS roles first. You can dual role CAS + Hub
Transport on same box. You can also network load balance them using
windows network load balance if you want two CAS boxes.


Order of deployment:

Client Access server role

Hub Transport server role

Mailbox server role

Unified Messaging server role


Next install your mailbox server role. The installation will be
different depending on whether you are doing SCC or CCR cluster.


How to Transition from Single Forest to Single Forest
http://technet.microsoft.com/en-us/library/aa997617(EXCHG.80).aspx




James Chong (MVP)
MCITP | EMA; MCSE | M+, S+,
Security+, Project+, ITIL
mchangetips.blogspot.com




On Apr 14, 9:30 am, "Clayton Sutton" <com> wrote: 

Setting up RPC over HTTP

Posted: 14 Apr 2008 06:21 AM PDT

On Apr 15, 8:11am, com wrote: 


Here is a copy of the requests that come in, in the log files unser
system32\logfiles

2008-04-15 07:18:57 W3SVC1 192.168.16.2 RPC_IN_DATA /rpc/rpcproxy.dll
wilsoneudc01.WilsonImportsEU.local:6004 443 - 194.116.199.218 MSRPC
403 6 0
2008-04-15 07:18:57 W3SVC1 192.168.16.2 RPC_OUT_DATA /rpc/rpcproxy.dll
wilsoneudc01.WilsonImportsEU.local:6004 443 - 194.116.199.218 MSRPC
403 6 0
2008-04-15 07:20:23 W3SVC1 192.168.16.2 RPC_IN_DATA /rpc/rpcproxy.dll
wilsoneudc01.WilsonImportsEU.local:6004 443 - 194.116.199.218 MSRPC
403 6 0
2008-04-15 07:20:23 W3SVC1 192.168.16.2 RPC_OUT_DATA /rpc/rpcproxy.dll
wilsoneudc01.WilsonImportsEU.local:6004 443 - 194.116.199.218 MSRPC
403 6 0
2008-04-15 07:20:23 W3SVC1 192.168.16.2 RPC_IN_DATA /rpc/rpcproxy.dll
wilsoneudc01.WilsonImportsEU.local:6004 443 - 194.116.199.218 MSRPC
403 6 0
2008-04-15 07:20:24 W3SVC1 192.168.16.2 RPC_OUT_DATA /rpc/rpcproxy.dll
wilsoneudc01.WilsonImportsEU.local:6004 443 - 194.116.199.218 MSRPC
403 6 0

Event 565 in Security Log

Posted: 12 Apr 2008 11:11 AM PDT

John,
Thanks for the reply. I am ‘jamesb’ and I was only reading my e-mail. I do
not access any other mailboxes other than my own. This error happens for most
(and probably all) of our users even though 90% of them do not access other
mailboxes.

I do have access to a shared calendar, though I wasn't accessing any
calendar at the time of the errors.


Thanks,
James


"John Fullbright" wrote:
 

open attachtments without downloading

Posted: 10 Apr 2008 05:39 AM PDT

With OWA for 2003, it's almost OWA attachment security which. See
http://support.microsoft.com/kb/555001/en-us



"Theodora" <microsoft.com> wrote in message
news:com... 

MSExchange TransportService Not starting - Event 1016

Posted: 09 Apr 2008 04:19 PM PDT

I can't even contemplate speaking for EMC (I work for the competition). I
would contact them directly and ask for a patch or update to permanently
resolve the issue based on what MS has communicated to you.

In a multivendor solution, compatability issues become more complex. For
any vendor, before applyiing a service pack check the supportability matrix
for other vendors' products in your environment. It a good idea to have a
test or QA environment (even a virtual one) available to test updates as
well.

John


"patilp" <microsoft.com> wrote in message
news:com... 

"Send As" Permission

Posted: 09 Apr 2008 02:56 PM PDT

Thanks very much. That would be a great article... except that we use
Exchange 2003, not 2007. Unfortunately the comparable TechNet book doesn't
contain a comparable chapter. And the instructions for using the "Exhcange
Management Console" don't seem to have any equivalency in the 2003 "Exchange
System Manager".

The approach using AD U&C is closer, but we'd already tried that. It looks
like we have given the user permission -- they even appear as a delegate.
But can they actually Send As? No.

Maybe I should ask the question a different way: What is the difference
between "Send As" and "Send on behalf of"? If I have both permissions, how
do I control which way I am sending a given message?

Thanks again!

David H.

"Oliver Moazzezi [MVP]" wrote:
 

IIFP Append to Display Name

Posted: 09 Apr 2008 02:54 PM PDT

I don't have access to Visual Studio. Are there any other options?


"Tomasz Onyszko" <pl> wrote in message
news:pl... 

Exchange Activesync

Posted: 09 Apr 2008 10:40 AM PDT

Maybe he's looking for something like Microsoft System Center Mobile Device
Manager.

"Martin Blackstone" wrote:
 

Microsoft Word - Text boxes in a Word 2007 table shift

Microsoft Word - Text boxes in a Word 2007 table shift

Text boxes in a Word 2007 table shift

Posted: 31 Dec 2014 12:42 PM PST

I have a table which is laid out to use as a job application. I used text boxes in the different sections to input my personal information.

What I've run into is: when I print it or convert it to a .pdf document, a few, but not most, of the text box information is shifting down.

I've adjusted those text boxes in the Word document to be correctly located, but still when printed or converted to .pdf, those text boxes are still shown as shifted down.

Oh, also it happens when I convert the Word document to a .xps document.

Why are only those specific text boxes doing that and how can I fix it?

Another question: I have legal copies of both Office 2007 as well as Office 2010, would it make any difference to use Word 2010 instead?

Office 2010 Printing off center

Posted: 31 Dec 2014 12:31 PM PST

All of a sudden my Word documents are printing off center, any ideas on how to fix this? All other programs are printing correctly and I do not know why it all of a sudden changed. 

is there a way to edit existing caption label?

Posted: 31 Dec 2014 12:19 PM PST

from reference> insert caption

i would like to edit some caption label
how can i do this?
automatically

ViewZoom200 sets view mode to "Draft". Want "Print" mode

Posted: 31 Dec 2014 10:30 AM PST

In Word 2013, the ViewZoom200 command switched the view mode to draft. Is there a way to keep it in the print view mode? (Other than fiddling with the zoom slider?)

I'm looking for a one-click solution to get 200% magnification in print mode. (I used to use page width, but the resolution on my new computer blows that up way to big...)

Thanks.

Ken

Too Many Clicks to Open a Document in Word and Excel 2013

Posted: 31 Dec 2014 10:03 AM PST

In Word and Excel 2010, I could click the Open icon in the Quick Access Toolbar and the "Open" navigation window would open, enabling me to go directly where I needed.  All of 2 clicks.

In Word and Excel 2013, it now takes 4 clicks just to get to that "Open" navigation window.  I have to now:

  1. Click the Open icon in the Quick Access Toolbar.
  2. It looks like the File tab opens, and I have to click the Computer icon.
  3. Click the Browse button.

Sure, it's only one more click, but it's annoying.  Is there any way to go directly to the "Open" navigation window?

Also, it appears they took away the "Resent" command from the Quick Access Toolbar.  Again, it's now only 1 more click, but annoying.

Thanks for any help you can provide.

want to send email from MS word with hyperlink one pdf file and excel file

Posted: 31 Dec 2014 08:53 AM PST

i have create one MS word file in office 10,  now I want to add one pdf file and one excel file in hyperlink and want to send it to other. how can I do this. How can other person view the pdf and excel file.

How can I move text in a text box in front of the background/fill of a text box?

Posted: 31 Dec 2014 08:52 AM PST

I created a text box, but the background/fill of the text box is covering and hiding the text in the text box.  How can I move the text in front of the background/fill of the text box?

Styles Window Doesn't Snap in Position in Word 2013

Posted: 31 Dec 2014 08:40 AM PST

In Word 2010, the Styles window would snap into position to the side of the main document work area (like the Navigation pane still does).   This was great, because it automatically resized itself and the document work area horizontally so that they both fit on the screen.  Does that make sense?

It no longer does this.  Instead, it floats over top of everything else. 

Was this feature removed in Word 2013?

THANKS!

Sorting problem A1 A10 A2

Posted: 31 Dec 2014 08:03 AM PST

Hello,

Here's my sorting issue. Using MS Word 2010, we often work with simple tables with several columns. One column we have contains patient room numbers. We need to sort those room numbers, but instead of getting this order: A1, A2, A10, etc., we get this order: A1, A10, A2, etc. I understand how to sort but choosing the numbers sorting does not work since there is a letter before each number. How can I sort the  numbers properly when there is a letter just before each number? Thanks!

Ron

Adding page numbers in footer with jpg

Posted: 31 Dec 2014 07:59 AM PST

I have a jpg image in my footer and would also like to add page numbers to my document. Whenever I do this, it deletes the image. Is there a way to keep the image but also add page numbers?

Installation language - Office

Posted: 31 Dec 2014 06:38 AM PST

When I installed Office Home & Student 2013 the wrong language was requested. I have uninstalled it now but when I tried to re install it came up with the same language with no options to change it.

No Spacing style removes formatting and other styles

Posted: 31 Dec 2014 06:19 AM PST

I like to use the No Spacing style at the start of a document because it changes line spacing to single and spacing before and after paragraphs to 0 pts. much similar to the old Word 2003 defaults. However, if I have already typed a document, press CTRL+A, and click No Spacing from the Styles gallery, any alignment I used in the document, such as centering a line, and any styles I used in the document, such as Heading 1 or 2 styles, are removed. If I applied manual formatting, such as bold and font color, that formatting is unaffected.

Why does No Spacing style remove other styles rather than simply changing line spacing and spacing before/after paragraphs? Is there a way to have No Spacing change only line spacing and spacing before/after paragraphs? Thanks in advance.

Cannot make Print Layout view use the facing/mirror page layout even when "zoomed" to multiple pages

Posted: 31 Dec 2014 06:02 AM PST

I am using Office 365 (Personal) Word.

I am working on a book/brochure type document and want to view it as it would be printed or read while I edit it.

I have set the page layout (margins) to use mirroring.  Neither "Print Layout" nor "Read Mode" respect the page layout I have chosen.  I cannot find where to make the view behave correctly.  Selecting the "zoom" for "multiple pages" doesn't work and there doesn't seem to be any other related options.  Having a search function for the commands list on the customisation ribbon dialog would be helpful.

The only way to see the document in a print layout, as it should be printed, is via the print preview.  I will have to continuously check the print preview to be sure that my layout is correct.  I can't split the view and use the print preview there, either.

It seems like a logical enough thing to me, that "Print Layout" and "Multiple Pages" should respect the page layout for facing/mirrored pages.  OpenOffice and LibreOffice do it and very likely every other word processor in the wild.  I'm almost certain Word used to do it, too but I can't be entirely certain.

How can I make the view behave correctly?

Daniel.

Help me stop the many steps to opening a document

Posted: 31 Dec 2014 05:41 AM PST

When I want to open Microsoft Office Word (2007), and click on it's icon, I get a permissions box titled User Account Control, asking me if I want to allow the following program to make changes to my computer? The program is Microsoft Corporation. If I click NO - word does not open. If I click yes, Word opens a blank document.

If I begin this process from my documents; several other steps are required to open the file I want. From My Documents, I click the file I want to open. The same User Account Control box opens, asking me if I want to allow Microsoft Corporation to make changes to my computer. If I click No - the file will not open. If I click yes, I get a message from C:\\****\documents\**** (personal info displays where I have entered the spacers). Another box opens with a large red X saying there is a problem sending the command to the program - however the document continues to TRY to open - only displaying as a blue document with no print. I then have to go again to the Office button, click on the file I want opened to FINALLY get the file to open.

Do I have a permissions problem, and sync problem, a download problem? Please, this is frustrating and I need help.

 

Hindi Numbers in 2007 Office

Posted: 31 Dec 2014 02:45 AM PST

Hi, My office is 2007 and I'm unable to write Hindi numbers although I write Arabic without any problem. The options of right-to-left language are not even enabled in Word Options Menu. When I tried online Help, It just says that these options are not enabled because you don't have right-to-left language enabled for text editing. Anyone can help on this please?

balance a centered paragraph

Posted: 31 Dec 2014 02:34 AM PST

If I center a paragraph, the last line may be much smaller than the other lines. Is there a way to somehow automatically balance the lines, to make sure they all have pretty much the same length? Thanks!

Microsoft Word 2003 Czech Proof

Posted: 30 Dec 2014 11:02 PM PST

I am experiencing an interesting problem with Word 2003.

Background:

Previously used MSWorks 4.0 Czech version and Word 2003 English version on a Windows 7 platform.

Word 2003 was able to identify and use MSworks dictionary and therefore allow Czech language spell checking.

New installation:

Windows 8. MSWorks 4.0 does not work (incompatible).

Word 2003 is fully functional with no issues.

Copying the Czech dictionary across does not work.

Installing the Microsoft Czech Grammar checker : https://www.microsoft.com/en-us/download/details.aspx?id=13457 shows this is installed (no errors) but  does not identify the Czech language or dictionary.

Any ideas of how to work around this problem

The user is a mildly disabled 74 year old who struggles with change and would prefer to continue using Word 2003 as long as possible.

Opening MS Office 2007 Word documents.

Posted: 30 Dec 2014 10:29 PM PST

When I try to open a Word document from the Recent Items list I get the message "There was a problem sending the command to the program." When I click on OK a second error message is received saying " Wordpad can't open this document. This document is either corrupt or protected under Rights Management."

After I click OK and close the window I can then open the document without any error messages being received.

I have been opening this document every day for the last year without difficulty. The problem started after the last Window's Update. Does anyone know how to cure the problem?

How do I cause a Word 2003 table disappear if a bookmark in the table has nothing in it.

Posted: 30 Dec 2014 03:28 PM PST

I have  to deal with Word 2003 documents created from customized document templates. I have complete control over the templates, so I can make any  changes to them that I need to achieve my goal.

Here is my problem:

I have tables with (usually) two rows in them. The first row contains static text defined in the document template that is used to create the document - it never changes. It usually consists of one cell, but some tables may have more than one cell in the first row. The first row is set with a background color to make it visibly distinct from the other rows.

The second row is always one cell, and contains a single bookmark. Any text that goes into this cell is put inside the bookmark. Sometimes this bookmark has nothing in it, and that is the important point.

Sometimes a third row appears.

What I need to do is to make the entire table disappear from the printout of the document if the bookmark in the second row has nothing in it.

A variation would be to make the table disappear if the bookmark contains a specific text string.

The table must have visible borders when it is visible.

This looks like a job for a VB macro that controls font visibility setting for the table.  I wrote a lot of VB 6 code at one time, but I am not very familiar with the details of the objects and functions that are used for Word macros, but I will be able to use and modify a good example.

Problem: Samba won't start because of Vmware - Forums Linux

Problem: Samba won't start because of Vmware - Forums Linux

Problem: Samba won't start because of Vmware

Posted: 26 Aug 2008 07:21 PM PDT

Bill Mar wrote: 


Hmm, I didn't think of that. I will check the docs some more and see if
there's a way to recreate the links.

Thanks for the input.


--
_____________________
CRC
sbcglobal.net
SuSE 10.3 Linux 2.6.22.17

Mandriva 2008

Posted: 24 Aug 2008 07:15 PM PDT

Raj. schrieb: 

I encountered similar problems with a different (Ralink) card, that
works fine under Windows. In addition to a very poor data rate,
disconnects and so on, my system tended to crash every now and then. It
seems to be a driver problem, at least all the problems disappeared
after I disabled the wireless device and connected my router by wire.

DoDi

iSCSI performance, vs. NFS, versus rsync

Posted: 22 Aug 2008 03:16 PM PDT

Chris Cox wrote: 

*THANKS*. That's what I needed.


 

(win)grub

Posted: 18 Aug 2008 06:51 AM PDT

On Aug 18, 6:43pm, Douglas Mayne <localnet> wrote: 

yes, booting windows (XP) is not a problem. I decided to use wingrub
so that MBR would stay intact.
but booting Solaris is a problem. I did, however, manage to boot into
it by typing commands in grub console.
the Windows (SATA) HDD is set as primary in bios.

here is how it should look:

NTLDR MBR on SATA: xp|wingrub
wingrub: chainload Solaris grub


so, the problematic wingrubs menu.lst should contain only one entry
(for now) and that is "chainload
Solaris"

hardening Linux

Posted: 17 Aug 2008 11:55 PM PDT

Nico Kadel-Garcia wrote: 

The *simple* answer is don't install things you don't need, like "Do you
really need gcc on an Internet-facing web server?" Actually figuring
out what you don't need can be a challenge.

SANS (www.sans.org) is an organization devoted to secure system and
network administration. It has an extensive reading room of contributed
materials, which are free. It also *sells* a pdf on hardening Linux
step-by-step, which may be a bit out of date by now, although they do
update it from time to time. Note that SANS is *not* Linux-specific.
You'll find stuff there on Windows, Cisco, etc., too.

There's Bastille (aka Bastille-Linux.org or Bastille-UNIX.org). It's a
set of scripts that will either do a bunch of stuff to harden your box
or just run a report to tell you what it would do if you let it. I
recommend the second option. It doesn't work on every distro, though.

There's Armor (www.spitzner.net/armoring.html) and Titan (which became
Sun JASS), which are for Sun Solaris and are kind of old by now, but the
ideas still apply.

Then there's SELinux, on which folks have already commented. It keeps
processes from doing things they're not allowed to do, even if they're
running as root. I think it's actually become quite usable under
Fedora. YMMV on other distros. It's definitely not for beginners, but
you don't have to be a 10-dimensional chess grand master in your spare
time, either.

How do you use Emacs to sort RMAIL email based on SpamAssassinheaders?...

Posted: 17 Aug 2008 05:50 AM PDT

the zak wrote: 
 

Such as Gnus, which runs under Emacs and does much more than Rmail ever
did. It can easily do the sorting you want. Sample .gnus entry:

(setq nnmail-split-methods
'(("spam" "^X-Spam-Flag: YES\\|^X-Spam-Score:")
("debian-announce" "^X-Mailing-List: <debian.org>")
("debian-user" "^X-Mailing-List: <debian.org>")
("debian-devel" "^X-Mailing-List: <debian.org>")
("debian-changes" "^X-Mailing-List: <debian.org>")
("debian-devel-announce" "^X-Mailing-List: <debian.org>")
("debian-amd64" "^X-Mailing-List: <debian.org>")))


I use Mailagent to presort our mail, deleting high-scoring spam.
--
John Hasler
gt.org
Dancing Horse Hill
Elmwood, WI USA

How do ya install programs on Ubuntu without a internet connection?

Posted: 15 Aug 2008 09:13 PM PDT

The Natural Philosopher wrote: 

USB wireless network devices are pretty cheap.

New video card.

Posted: 14 Aug 2008 06:02 AM PDT

On Aug 14, 10:06 am, Bill Mar <net> wrote: 

I needed higher resolution because this indirectly controls the
dimensions of the virtual desktop.
You are right. I plugged the thing in and it worked. I got 4 out of
the 5 resolutions I asked for in xorg.conf.

Thanks for responding.

remote installation

Posted: 13 Aug 2008 02:17 AM PDT

On Aug 13, 7:27pm, Allen Kistler <moc> wrote: 

ubuntu 8.04

Dual boot, WIN2K won't boot.

Posted: 10 Aug 2008 12:19 AM PDT


"sridhar" <com> wrote in message
news:googlegroups.com... 
news:googlegroups.com... 


But still not a bad precaution.

I generally find win2k corrupted registries are cause by RAM or HD problems

before you do a lot of trouble-shooting it's good to confirm that your
hardware is OK

Son's computer crash, need some YD help-he leaves in 5 hours.

Posted: 09 Aug 2008 06:27 AM PDT

On Sun, 10 Aug 2008 05:39:29 -0400, Andrew Halliwell
<sky.com> wrote:
 


Yes, I got 1 reply and sent it to my son, awaiting news from him.

GK

Gannt bars visible in Legend Microsoft Project

Gannt bars visible in Legend Microsoft Project

Gannt bars visible in Legend

Posted: 05 Jan 2006 05:56 AM PST

Hi Helge Svee,

See FAQ #33 "What the Gantt Chart Legend Shows" at:
http://project.mvps.org/faqs.htm

Hope this helps. Let us know how you get along.

Julie
"Helge Svee" <Helge microsoft.com> wrote in message
news:com... 

cost rollup

Posted: 04 Jan 2006 04:14 PM PST

Hi Peter

I've just set up a project file (ver 2000) using the information you
provided and my 3rd column sums up to the summary task immediately that the
data is entered in either the first or second column.

i used a number column for column 1 and cost columns for 2 & 3 - is this
what you did also?
failing that what version of project are you using? have you got the latest
service packs on it?

--
Cheers
JulieD


julied_ng at hctsReMoVeThIs dot net dot au


"peter versluys" wrote:
 

Unassigned Resources in resource usage

Posted: 04 Jan 2006 10:08 AM PST

OK, I've traced them to one project;
the unassigned tasks have no resources or hours given to them, yet they
tally in "Resource Usage"; but not in the "View...Reports".

Other that rebuilding this schedule; any thoughts?

"Jan De Messemaeker" wrote:
 

CC Status Reports

Posted: 04 Jan 2006 08:42 AM PST

No problem - good luck :-)

Mike Glen
MS Project MVP



"Robert" <microsoft.com> wrote in message
news:com... 

Can you put in just dates, not lengths?

Posted: 04 Jan 2006 08:30 AM PST

And for my two cents it sounds like you have a re-occuring task that takes
place very Monday from 9:00 - 12:00. You can put in a reoccuring task with
those parameters and I think that will give you what you want. It will not
move unless you put in dependencies since you will say it starts on Monday
and once a week on Monday for a duration of 3 hours. Sort of what we do with
scheduled project meeting where we schedule them for each week at the same
time for the same people for the same length of time.

Hope this helps.


--
Jim Reid, PMP


"Jan De Messemaeker" wrote:
 

Custom list for filters

Posted: 04 Jan 2006 08:20 AM PST

Thanks, I'll try that.

"Jan De Messemaeker" wrote:
 

calendar updates

Posted: 04 Jan 2006 08:14 AM PST

Hi,

The macro in the "Article on MS Project" in my website may inspire you.
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"John Mac" <net> schreef in bericht
news:googlegroups.com... 

Project not holding format changes

Posted: 04 Jan 2006 07:18 AM PST

Jim --

It sounds like your Project Server administrator deleted the Enterprise
Gantt Chart view from the Enterprise Global file. The Enteprrise Gantt
Chart view is the only default enterprise View that ships with Project
Server 2002 and 2003. Because it is an enterprise View, users cannot modify
the Enterprise Gantt Chart view in any way. This is how an organization can
distribute a "corporate" View to everyone in the organization.

On the other hand, Views like the Gantt Chart, Resource Sheet, Tracking
Gantt, Task Usage, and Resource Usage views are all local Views that are
stored in each user's Global.mpt file on his/her hard drive. These Views
are totally customizable. If the PM in question applies one of these local
Views, he/she should be able to customize it and have the changes stick.

Therefore, I think there are several things you can try to solve this
problem:

1. Go to the PC of the PM in question and open his/her project. Try
applying several different Views and determine if you can customize the View
and have the changes stick. If not, note what Views are causing the
problem.

2. Talk to your Project Server administrator and determine what he/she has
done with the Enterprise Gantt Chart view and why. Also, determine if
he/she has made any of the local Views (such as the Gantt Chart or Resource
Sheet) into enterprise Views, which he/she should NOT do.

Let us know if we can help any more.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We wrote the book on Project Server"


"Jim Reid" <net> wrote in message
news:com... 

Creating S curve graph with days management

Posted: 04 Jan 2006 06:13 AM PST

Then you have to assign manhour on your activities, and eg use excel for
displaying the curves.

BUT the best way of managing project with MSP is to buy an add on software
from SAFRAN call Safran for MSP. It works and I have used it in several
projects. Contact them at www.safran.no

com skrev:
 

Will Project Work For Us?

Posted: 04 Jan 2006 05:52 AM PST


John Sitka wrote: 

Ok, I see how you interpreted it now. I took that line to mean, "If
it's in the past, don't track it anymore". 

Help! Will Project work for this application?

Posted: 03 Jan 2006 03:11 PM PST

Steve, I disagree with Rod MSP is ideal for this situation. You would need
to know the number of man hours/days to complete a task and if the task if
set to "Fixed Duration" it will calculate the number of resources you need to
complete that task. I don't know if you could do that in Excel or not but I
know you can do it in MSP.


--
Jim Reid, PMP


"steve" wrote:
 

How do I make the color of my task name conditional?

Posted: 03 Jan 2006 02:32 PM PST

In Format, Text Styles there is a style called "Marked Tasks" and there is a
Field/Column that you can insert to go with it.
It is only Yes/No and there is only one.
There is also a Text Style for Highlighted Tasks, which are Tasks which are
found by a Filter, so if you filter on your criteria.
Again a bit limited because you want 3 criteria and 3 colours and with the
filter the Task is either filtered in or filtered out.

If you Mark for one of your criteria and filter/highlight for another, and
set styles accordingly, then all other Tasks must meet the last Criteria.

"CBland" <microsoft.com> wrote in message
news:com... 

MSProject Macro problems

Posted: 03 Jan 2006 12:30 PM PST

yes sure :) my mistake not Office 2003 but Project 2003

"Jan De Messemaeker" <jandemes at prom hyphen ade dot be> wrote in message
news:phx.gbl... 
Subscribe to: Posts (Atom)