Pages

Search

Microsoft Word - Computer came with MS Word Starter 2010

Microsoft Word - Computer came with MS Word Starter 2010


Computer came with MS Word Starter 2010

Posted: 14 Sep 2013 02:41 PM PDT

My HP, Windows 7 computer came with MS Word Starter 2010, which has been working fine until yesterday when I wanted to open a document and saw that all my documents now have a DOCX next to them.  When I clicked on it, it came up with an option to buy Word or give a pin no. and it came with the computer so I have no pin.  What is going on and did MS change it for some reason?  How recover these files so I don't lose them and can open them.  I'm not that advanced in computer use.  I did go to the default area, clicked on one and tried to change it to what was offered which is my Word 2010 starter and nothing took.  It wouldn't change back.  Someone suggested I must have changed something in my default, but I did not.  Help.  By the way, I have Norton 360 so didn't think it was caused by a virus.  However, unless I was also dreaming, when I went on my computer I didn't notice the Norton logo on my toolbar at the bottom, but thinking it must have been there as I put in the disk for Norton which has 3 times it can be used and although it sounded like it was running, I never was asked for the code that has to be put in so I thought it must have been on there all along.  However, I did now see the logo.  I did a full system scan and it came up with 70 things it found and fixed or eliminated but also I noticed it had a bunch of medium risk ones which I've never seen on before with a scan and it said it blocked them.  Don't know if there's anything that could knock Norton off my computer so I'd have to reload it and that would give a virus time to get into the computer.  I need help to do something simple or probably can't do it myself.  The man at Staples tried to tell me that Word starter is not free anymore but that would insinuate that MS made the changes remotely.  I'm not buying that idea as it was said to come with Starter and never told me it had an expiration period and never saw that posted either.  I got the computer in 2011.  Thanks for any help.

How do I get Microsoft Office 2010 to stop asking for the product key?

Posted: 14 Sep 2013 02:31 PM PDT

In spring of 2012, I bought this HP Pavilion desktop running Windows 7 Home Premium, and it came pre-installed with Microsoft Office Starter and Excel Starter. No powerpoint or anything, but I didn't need those, so that was fine.  It is now mid-September of 2013, and everything had been working fine... until today. Now, whenever I try to open an Office document that is either in the "My Documents" folder or shortcutted on my screen, it will refuse to open the document saying that Office is not installed on my computer and that I need to either install it or enter a product key.

BUT. I have Office pinned to my task bar, and whenever I open the program by clicking on it there, or by going through the start menu, it opens just fine. Indeed, I can get to my documents now by opening Office first and then opening the document from inside of there. Still, though... It's annoying that I can't just open the folder I need anymore, or even use "My Documents" or any of my office shortcuts. I've tried restarting my computer, and checking for updates, but no dice. It's not like I was running a trial version and it ran out, either. One of the major reasons I chose this computer was because I wouldn't have to put up with that.

Is there any way to fix this? I don't like how much this problem is slowing down my work flow, and I'm seeing less and less reason all the time to not just work in Google Docs for everything. (The product key is long-gone in all the chaos of moving three times since I bought this, but there's no reason why I should have to use that at all.)

Microsoft Word 2010 will not open my saved documents

Posted: 14 Sep 2013 12:52 PM PDT

I have Microsoft Word 2010 that was already installed on my computer when I purchased it at Costco.  Recently it stopped allowing me to open my documents or any documents that were sent to me.  Now whenever I click on one of my documents the Microsoft Installation screen pops up and I say to Activate then it asks for a Product Key.  

 

But the program was already installed on my computer when I bought it back in 2010 from Costco when they still had Word Starter on the computers instead of the 90-Day trial like they do now.  I was told that this is happening because of Microsoft's recent update. 


It is NOT a trial edition, I bought my computer 3 years ago and just recently stopped working.


Does anyone know how to fix this please?

 

Thank you!

Microsoft Word Starter 2010

Posted: 14 Sep 2013 12:10 PM PDT

All my documents from Microsoft Word Starter 2010 that I have saved in my Document folder; the icons have turned to gold and say that the Microsoft Office product necessary to open this file is not installed on your computer.  It says that I have to purchase the program or if I already purchased the program to put in the product key number. I am not sure what this is. 

When I bought my computer Microsoft Word Starter 2010 was already on my computer. 

Why did this happen. I was able to open my documents a few days ago and it seems that since my computer did the windows updates, I have not been able to access them.  Not sure if this is the reason why.

Could you please help me out. 

Thank you Susan

not able to open pdf through Microsoft word in Document Library.

Posted: 14 Sep 2013 11:22 AM PDT

My pdf files are posted in the Document Library files and I was able to access the pdf through Word. Now I cant open the pdf  but only view it  When I open it I get a set of gggflgoo below   %PDF-1.6 %粤マモ 4 0 obj <</Linearized 1/L 48999/O 6/E 45258/N 1/T 48873/H [ 916 187]>> endobj                     xref 4 31 0000000016 00000 n 0000001103 00000 n 0000001162 00000 n 0000001620 00000 n 0000001707 00000 n 0000002531 00000 n 0000002623 00000 n 0000003412 00000 n 0000004180 00000 n 0000004980 00000 n 0000005787 00000 n 0000006566 00000 n 0000006655 00000 n 0000007419 00000 n 0000008204 00000 n 0000010836 00000 n 0000012232 00000 n 0000015543 00000 n 0000018379 00000 n 0000018770 00000 n 0000019123 00000 n 0000020250 00000 n 0000021015 00000 n 0000021569 00000 n 0000022343 00000 n 0000022766 00000 n 0000035693 00000 n 0000038651 00000 n 0000040589 00000 n 0000043022 00000 n 0000000916 00000 n trailer <</Size 35/Prev 48863/Root 5 0 R/Info 3 0 R/ID[<C34A56F9A2201548ADE8BD8463D64026><C34A56F9A2201548ADE8BD8463D64026>]>> startxref 0 %%EOF                 34 0 obj<</Length 107/Filter/FlateDecode/I 116/S 39>>stream xレb``紳``>マ kPウ0p`L@煤b・>ヨ3

I am unable to open my documents.

Posted: 14 Sep 2013 10:56 AM PDT

I have Microsoft Office 2010 and every time I try to open my documents it tells me, "This program is unable to run because of missing or corrupted files. Contact your computer manufacturer." I have tried re-installing Microsoft Office but it crashes. 

how do i create a page with id and password

Posted: 14 Sep 2013 10:28 AM PDT

new to the internet, schoolwise, and need help creating these new pages. anything will be helpful.

 

Thank You In Advance,  Keba

Calendar Wizard Overlays Months

Posted: 14 Sep 2013 09:56 AM PDT

When I use Calendar Wizard to create a Word 2010 doc for an entire year (doesn't matter which year), it appears to work fine.  However, when I "save" the file, suddenly January and February overlay each other (the 10 other months remain one calendar per page)...how can I fix this?

 

Thanks.

Word docs convert into Journal whenever I turn off computer

Posted: 14 Sep 2013 09:30 AM PDT

When I turned off the computer 2 nights ago, it automatically installed new updates .  When I next turned it on, my 100's of Word docs had been converted to Journal docs, which I couldn't open since I don't have Journal.  I recovered them using System Restore, but when I turned on computer today, the same thing had happened again.  Another symptom is I don't have an option to open a new Word doc inside a folder, although I can outside a folder with my Microsoft Word Starter.  Any ideas how to stop this besides never turning off my computer?

I am really fed up since coming onto office 365 windows 8 and was happy with Vista and other earlier packages ..l am so frustrated

Posted: 14 Sep 2013 08:55 AM PDT

I am really fed up since coming onto office 365 windows 8 and was happy with Vista and other earlier packages ..l am so frustrated....I have asked you several times here that l go into word and now  l am faced with all the new blank files I try to open other recent text pages have grid in printed on ever A4 sheet so cannot produce any new documents ...what is happening as I was happy with vista on my old machine now this software is a nightmare so please help .....

Word 2013: Cannot find Table > Design tools > Draw Table and Table Line Eraser

Posted: 14 Sep 2013 08:38 AM PDT

Hi,

I am using Word 2013. I drew a table and wanted to erase a single line from the table. I tried using the method in your website:

According to the very last statement: 

  1. To erase a line, click the Table Tools Layout tab, click Eraser, and then click the line that you want to erase.
But as you can see from the screenshots attached below, there is no such option! This is very irritating, i can't manipulate the table as i could in office 2010 and 2007! The DRAW options are MISSING! 


 

My System information:
Windows 8 32 Bit, Office 2013, Samsung ATIV 500T (uses atom clover trail x86 Z2760 with 2GB RAM)

Help will be appreciated. Thank You! 


Space above paragraph on first page

Posted: 14 Sep 2013 08:11 AM PDT

Hi!

 

I've read and enjoyed http://answers.microsoft.com/en-us/office/forum/office_2010-word/how-can-i-make-the-first-line-of-page-two-start/369b86bd-92ff-49ba-a274-85e190fafe3c

 

Is it possible to remove the space above a paragraph on both the first and following pages? That would make my document look more consistent.

 

Word2010 MailMerge Repeating fields

Posted: 14 Sep 2013 07:22 AM PDT

Way back in Word97 I created a mail merge for an invoice type document with the Customer name and address at the top, a line for each item and a total and payment information at the bottom. The secret seemed to be with putting the item fields for each line into a table.

I don't seem to be able to do this in Word2010, can it still be done or have we moved to a different way of doing this sort of thing?

 

Thanks

Dave

office 2007 on windows 8

Posted: 14 Sep 2013 06:34 AM PDT

My laptop has 2 account users on it, myself and my wife, I have office 2007 installed on it, I can use it as an administrator but my wife can't use it on her account, every time she tries to it a window pops up asking her to buy office 2010. I have even installed it on her account but it still wont find it.

chapter titles in header

Posted: 14 Sep 2013 05:42 AM PDT

I have a book with sixteen chapters and an Index. How can I make chapter headings appear in a header or footer?  I already have designated sections for each chapter.

Word Starter 2010

Posted: 14 Sep 2013 03:16 AM PDT

Following a windows update (13 September 2013) I have been unable to open any word documents that I created through Word Starter 2010, which came as a free installment on the purchase of my laptop.  When I try to open a saved file I get the following screen.  As this came free with my laptop it does not have a product key so I now cannot open my CV or job applications and need to urgently.  How can this be rectified?

Dots in table of content disappear for some entries when adding a new chapter

Posted: 14 Sep 2013 01:16 AM PDT

I have a large Word document with an automatic table of contents. It worked all well before, but when I now add a new chapter and update the table of contents the formatting completely changes, spaces appear and dots disappear.

The 'normal' table of contents:

When I add the 'test' chapter:

It doesn't matter where I add a chapter, it is just adding a chapter which messes it up. I tried many things to fix it (editing the styels etc.), but no result. Does anyone know how to fix this?

Updates

Posted: 13 Sep 2013 11:22 PM PDT

Why ist mein PC mit Windows 7 allways akcepting up dates
I have to much updates?
After6 hour he stoped to load updates from Microsoft Office 2007?
Thanks

How do I insert a custom chart in Microsoft Word 2010?

Posted: 13 Sep 2013 10:23 PM PDT

When I go to the Insert tab and click chart, I only get a basic chart instead of all the options for various chart types. How do I change this? Thanks in advance
    - Rowan
 

Change Default Carriage Return Font and Point

Posted: 13 Sep 2013 08:44 PM PDT

Greetings!

How does one change the default font and point for carriage returns?

When I press ENTER I get a certain font and a certain point (in this case 10).

I want set it so whenever I press ENTER to get Times New Roman at five points.

I would deeply appreciate your help in this matter.

Have a PDF file sitting in the print queue. Unable to delete or restart it. This is preventing printer from functioning.

Posted: 13 Sep 2013 08:13 PM PDT

printer stopped functioning due to job in print queue.  Need help as it won't delete or restart.

Microsoft Word will not let me close without problems when I don't want to save

Posted: 13 Sep 2013 07:25 PM PDT

I have Microsoft Word 2007. Whenever I try to close out of the program without saving, a pop up box says do you want to save the document? I click no (because I don't want to). After that, another pop up comes on saying that it cannot save or create this file. I click ok. Then another one pops up saying it had trouble saving and it asks if I want to save the document as (some long title) and do I want it to be marked to be recovered. I say no. Then save as pops up along with another message saying I don't have permission to access this folder. I click cancel on the folder box and then cancel on the save as box. Then I click the 'x' on Microsoft Word and yet another box pops up saying changes have been made to the global template and do I want to save those changes. I click no. 
I'm so confused as to why this happens every time I try to close Microsoft Word without saving. I hope someone can understand my question and answer it. Please and thanks!!

Microsoft Office Word 2007 will NOT open "docx" file

Posted: 13 Sep 2013 06:47 PM PDT

Microsoft Office Word 2007 will NOT open "docx" file; instead it tries to open the docx with "Microsoft Office 2007 Component."  I've looked through the MS community and saw this problem arises a lot, but none of the methods given were able to help in my case.  I cannot change the default program for the file type... I can't select MS Office Word.  The registry change ( winword /r) didn't work...   

Can you help me?

Trouble in Formatting

Posted: 13 Sep 2013 06:10 PM PDT

Dear All,

I am having a crazy formatting issue. After formatting a document, while opening one machine all the formatting like (Line spacing, font, size...) are fine, while the same document opened in another machine all re not good. Even we are using the same word 2007. Let us advice to rectify this issue.

One more issue is while we are inserting any images, even though the original image not a having border, automatic border occurs after inserting,

Kindly help us to rectify this issue.

Thanks in advance!

Regards,
Ilayaraja. N

office starter 2010

Posted: 13 Sep 2013 05:52 PM PDT

Yesterday after a Windows update installed, MS Office Starter 2010 would not work and all the document icons changed to orange folders.  The same thing happened last April--I corrected it then by following directions at support.microsoft.com/kb/2465140.  I attempted to follow the same directions today only to find, after I'd uninstalled Office Starter, that I can't reinstall it using Microsoft Office 2010.  How can I get Office Starter back and get it working again? 

MS Monthly Updates Causes Problems with Office 2013

Posted: 13 Sep 2013 05:44 PM PDT

Team I purchased MS Office Home & Business 2013 in June, and I installed it without problems on my Windows 7 Dell laptop.  Everything was fine until the Microsoft monthly updates were issued in July, then all my Word and Excel documents became read only, and they all showed that they were created using Word or Excel 2007, even the ones that were created with Word or Excel 2013.  I posted the issue here on the Community site and was told to run "Quick Repair" or "remove and re-install" Office 2013.  I removed and reinstalled the software and that fixed the problem. 

 

Everything was fine until the August MS updates were received, after which I was in the same situation, so this time I ran "quick repair" which fixed the problem.  Then everything was fine until the September MS updates were received, and the same thing has happened.  Again I ran quick repair, and the documents are returned to normal. 

 

The laptop I'm using did come with a trial version of Office 2007, which I removed/de-installed after the first problem in July.  But still the problem keeps coming back each month right after the MS monthly update is received. 

 

Please help.

word starter

Posted: 13 Sep 2013 03:31 PM PDT

Recently windows updated installed some new updates. Now I do not have Word Starter on my computer. It was unistalled. Word starter is suppose to be on my computer as long as I own it. How can I get it reinstalled. I do not need the full version so don't suggest I spend the money for it.

I have a problem with office word as it updates to save the text.

Posted: 13 Sep 2013 11:03 AM PDT

I have a problem with office word as it updates to save the text, it takes a long time. At first, I thought it was just the large amount of information I added. But, it don't have to be a large amount the whole system slows down even after five minutes of information I put inor add. In addition, the reference tab, in the drop box for in putting reference sources has less categories, and this takes away the quality of the program. A change need to be made with the areas mentioned. I don't like the 365 over 2010, I prefer Office 2010 I never I countered these problem with office 2010. 

Why was 365 program the preferred offer over any other program choice. Denying a option for any other choice of program operation?

exchange 2003 & ol2000 - Microsoft Exchange

exchange 2003 & ol2000 - Microsoft Exchange


exchange 2003 & ol2000

Posted: 19 Apr 2005 09:35 AM PDT

this appears to be a outlook 2000 issue as 2002/2003 outlooks work fine
no there are no profile generators been used

"Mark Arnold [MVP]" wrote:
 

0x8004010F error when using "Offline Folders"

Posted: 18 Apr 2005 12:10 PM PDT

Thanks Tom, one of the things in that link fixed my problem.


Clayton



"Tom Felts" <com> wrote in message
news:phx.gbl... 


Standardized email signitures

Posted: 18 Apr 2005 07:39 AM PDT

http://support.microsoft.com/default.aspx?scid=kb;en-us;317680

Taken from posting above. Hope this helps.

Martyn Fewtrell

"Richard Quick" <com> wrote in message
news:e%phx.gbl... 


Exchange Connectivity

Posted: 18 Apr 2005 03:48 AM PDT

Hi

No, we share the same network media without any routers. and they are two
diffrent domains with diffrent subnets.

ABC.com ----> 10.10.0.z subnet 255.255.252.0
Xyz.com ----> 10.20.0.z subnet 255.255.255.0





"Steve Carr" <scarrNOSPAMbastyr.edu> wrote in message
news:%23gj$phx.gbl... 


REPLY AS who email was TO.

Posted: 17 Apr 2005 10:10 PM PDT

bobk wrote: 

Why do the forward rather than allow A access to B's inbox?
 

That's because it's been forwarded to A's mailbox. If you granted rights to
the B inbox/etc. to user A, and he/she has Send As rights (*not* Send On
Behalf Of - take those away & add Send As permissions in ADUC - security
tab), and A opens mail in B's inbox, and replies, it should send work fine -
presuming you're using Outlook 2002/2003. Also I'm presuming you're using
E2k/2003.
 

See above. 

Yep.


Looping through Outlook Contacts gives me a 'Invalid Cast Exception'

Posted: 17 Apr 2005 05:49 AM PDT

Sue, I will try that. Thank you so much for your help! You, your books,
and your website have been a tremendous resource to me over the years.
Keep up the great work!
Thanks again!
Chris Thunell
com

"Sue Mosher [MVP-Outlook]" <com> wrote in message
news:phx.gbl...
Did you read the Help topic on the Restrict method? You need to specify what
field to look in as well as what value to look for:

strFind = "[MessageClass] = " & Chr(34) & "IPM.Contact" & Chr(34)
Set colItems = = myFolder.Items.Restrict(strFind)

--
Sue Mosher, Outlook MVP
Author of
Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"Chris Thunell" <com> wrote in message
news:phx.gbl... 
 


OWA Change Password Disappeared

Posted: 15 Apr 2005 08:38 PM PDT

Jim,
Good eye! I had made the registry change on one of our BE servers but
not the other 2. I thought about that this morning as I was getting ready
to go to work. I assume that altering the cookie timeout parameter must be
made on both the FE and BE too?


Thanks,
Fred


"Jim McBee [MVP Exchange]" <spambegone.net> wrote in message
news:phx.gbl... 


E2K3 Front End - Back End with POP3

Posted: 15 Apr 2005 09:19 AM PDT

Had an SSL box checked. Thanks Mark.

Fred

"Mark Arnold [MVP]" <org> wrote in message
news:com... 
trying 
to 
as 
Front 
mailboxes 


Outlook 2003 & OWA on Exchange 2003 query

Posted: 13 Apr 2005 08:51 AM PDT


"Brendon" <net> wrote in message
news:phx.gbl... 
and 
View 
bottom 

Brendon,

Thanks for the pointer. It was a case of changing the deliver to from
Personal Folders to the users account name

Andy


Customizing the GAL

Posted: 11 Apr 2005 09:54 AM PDT

My bad Presley,

That DID work! It was user error. I forgot to replace "mydomain.com" with
MY real domain. duh...! Thanks for your help.


Clayton



"Clayton Sutton" <com> wrote in message
news:%phx.gbl... 


Install OWA 2003 only on server running windows 2003

Posted: 11 Apr 2005 05:44 AM PDT


"Maki" <microsoft.com> wrote in message
news:com... 

Yes.
 

(to the back-end server) Yes.

Lee.

--
___________________________________

Outlook Web Access for PDA and WAP:
www.leederbyshire.com
___________________________________



How to use newsgroups in Outlook 2003

Posted: 11 Apr 2005 02:39 AM PDT

On Mon, 11 Apr 2005 11:39:15 +0200, "Fredrik Sandell"
<com> wrote:
 
You can do this through the Exchange server and use Exchange to pull
selected newsgroups from the Peer ISP server, if the ISP permits and
supports it.

On an individual basis: http://www.ghytred.com/ is a good app.

Rules and alerts exchange 2003 and outlook 2003

Posted: 11 Apr 2005 12:09 AM PDT

I Think yuo have to wait for next Exchangeversion

JAS
"fresan" <microsoft.com> wrote in message
news:com... 
all 
supported 


Database or datebase element is corrupt

Posted: 10 Apr 2005 01:25 PM PDT

On Sun, 10 Apr 2005 15:53:03 -0700, "Matthew"
<microsoft.com> wrote:
 

Yes, use the agent, but a full, exchange-aware backup of the
storage groups is sufficient enough. I dont think mailbox level
backups provide any value. 

maybe, but that error will reappear again. Its bogus.
 

Reply and Forward Information not Showing

Posted: 09 Apr 2005 07:23 AM PDT

Hi Jerry:
Yes, that is strange behavior. Probably a combination of steps that the
OWA programmers just did not take in to consideration. I'll forward this on
to some people that might be able to get this in front of the team, but I
doubt it will be addressed very soon. We can cross our fingers, though.

Thanks,
Jim

"Jerry" <microsoft.com> wrote in message
news:com... 


OWA in DMZ and Server within LAN

Posted: 08 Apr 2005 11:45 PM PDT

On Mon, 11 Apr 2005 22:23:02 -0700, maki wrote:
 
Yes, you must install a full Exchange installation and then make it a Front
End server.

2 e-mail adresses on 2 different computers

Posted: 07 Apr 2005 01:42 PM PDT

David wrote: 

No problem.
 

Well, if the mail is in a single location (the shared mailbox/PF/whatnot),
when one person deletes something, it's deleted, period. 

Yes. 

A distribution group that includes both mailboxes? One for info and one for
sales? 


Microsoft CRM - CRM 1.2 and Change Domain

Microsoft CRM - CRM 1.2 and Change Domain


CRM 1.2 and Change Domain

Posted: 10 Jun 2004 01:33 PM PDT

This tool is what you need. The CRM Redeployment tools. These tools can
definately take a crm system from one active directory to another. In fact
Microsoft have told me that they could package up my entire CRM system using
this tool then bring it into their test domain if i needed advanced
troubleshooting. Microsoft also told me that it is VERY important to follow
all the guidelines in the tool and do not try to take shortcuts

here is the link

http://www.microsoft.com/downloads/details.aspx?FamilyID=bfced393-61db-49af-9a50-4a90b311fa7d&DisplayLang=en#filelist



"Sylvain Bélanger" <ca> wrote in message
news:phx.gbl... 
is 
Migration 
doing 
key 
if 
Windows 
need 



Install tips

Posted: 10 Jun 2004 01:22 PM PDT

Simple tip

read the implementation guide and follow what it says. If this is your first
install you may want to set up a test domain using virtualpc and do a test
install on that setup before deploying on your production servers.


"gavin" <microsoft.com> wrote in message
news:BCEE8197.7FC%microsoft.com... 


Can teams own records ? Inconsistency between several documents (CRM installation & Customisation exam)

Posted: 10 Jun 2004 07:51 AM PDT

Teams cannot own records. Only users can own records. In the
application you can look at the owner field, it will always be a user
name. Records can be shared with teams. Hope that helps.

"Koen" <com> wrote in message news:<40c8759d$0$8393$skynet.be>... 

Exchange Server and CRM

Posted: 10 Jun 2004 07:04 AM PDT

The default port for your CRM webserver. Typically this is port 80.

Matt Parks

----------------------------------------
----------------------------------------
On Thu, 10 Jun 2004 10:04:56 -0700, "com"
<microsoft.com> wrote:

What port should I be looking for?
The Bridge head server is on a DMZ network so it's
blocking a lot of trafic so which one should I look to
open 
on your Exchange servers. 
systems. That could be why 
variety of other possible 
router on whichever box is 
from others, the router 
anti-virus software also 
be sure. 
0700, "com" 


not 

Remote users

Posted: 10 Jun 2004 04:22 AM PDT

Microsoft actually recommends that the first go offline is performed on your
office network as that is the one that takes the longest. However of course
you can do this over VPN but keep in mind that the sync could take at least
an hour maybe two. minimum dsl connection would have to be at least 512k
however these days anything over 1mb is good. There is no whitepaper
discussing this as it involves so many factors such as network speed, crm
server speed, client computer speed etc.




"Marlen" <com> wrote in message
news:phx.gbl... 
take 


Quantitydecimal undefined

Posted: 10 Jun 2004 03:34 AM PDT

Pete,

There are built-in scripts in the app that rely on some of the fields. It
sounds like you removed the quantity field from the form, which is needed by one
of these scripts.

Matt Parks

----------------------------------------
----------------------------------------
On Thu, 10 Jun 2004 03:34:05 -0700, "Pete at CRMbase dot co dot uk"
<microsoft.com> wrote:

I'm having a couple of problems with the export and
import of a customisation. I've added some custom fields
and removed other fields from the forms. The
customisation on my system works but I get an error on
the product form which when displayed says
quantitydecimal undefined. The fields is displaying and
working so I'm not sure if this is a serious error or
not. The second problem is that when I import the
configuration to another CRM server the customisation
forms lose all the display of fields, tabs and sections -
although they are present and can be double clicked to
show their properties. Anyone seen this before ?

Unable to do duplicate checking on accounts and contacts in M CRM1

Posted: 09 Jun 2004 02:56 PM PDT

If you need duplicate checking during data migration, use Scribe Insight at
www.scribsoft.com

Peter


"Talei" <microsoft.com> wrote in message
news:com... 
as I want. There is no duplicate checking. Is that part of the functionality
of Microsoft CRM1.2 or am I missing something. Do I need to configure an
option? Its important as part of the project I am working on requires
duplicate checking 


Missing CRM Key error

Posted: 09 Jun 2004 02:27 PM PDT

Dean,

Did you install the Exchange router for CRM? That's usually the problem.

Matt Parks

----------------------------------------
----------------------------------------
On Wed, 9 Jun 2004 14:27:38 -0700, "Dean Schauer"
<microsoft.com> wrote:

I have installed Microsoft CRM 1.2 and it seems to be
working fine. I tried to create an email within the
browser version (not via outlook) and get an error
message that says: Communications error: Missing
Microsoft CRM key. Any idea what I may have done wrong
on the install?

CRM Uninstall

Posted: 09 Jun 2004 01:08 PM PDT

try this from previous posts, I had to manually remove CRM
keys as described below:
Removing CRM Sales for Outlook is not just a case of
Add/Remove Programs. You need to remove entries from the
registry in certain cases. See the details below:

Determine your Sales for Outlook version.

1. Open Microsoft CRM Sales for Outlook.

2. Click on CRM Shortcuts and select the CRM (Home Page)
link.

3. Within the CRM Home view pane click Help and click
About Microsoft CRM.

4. Verify the version number.

If you are using Microsoft CRM Sales for Outlook version
1.0.3017.1 or version 1.2.3297 use the following steps.

1. Click Start, point to Settings, click Control Panel,
and then double click Add/Remove Programs.

2. Click on Microsoft CRM Sales for Outlook and click
Change/Remove. Wait for the wizard to finish.

3. Once step 2 is complete click on Microsoft SQL Server
Desktop Engine (CRM) and click Change\Remove.

4. Close the Add/Remove Programs Window.

5. In the Control Panel window opened in step 1 double
click Administrative Tools and double click on Services.

6. Find the MSSQL$CRM Service.

7. Right click on the service and choose Stop.

8. Close the Services Window.

9. Right click on Start and click Explore.

10. Navigate to C:\Program Files\Microsoft SQL Server.

11. Right click on the MSSQL$CRM directory and choose
Delete.

12. Navigate to C:\Program Files\Microsoft CRM.

13. If it exists right click on the Client folder and
choose Delete.

IMPORTANT This article contains information about
modifying the registry. Before you modify the registry,
make sure to back it up and make sure that you understand
how to restore the registry if a problem occurs. For
information about how to back up, restore, and edit the
registry, click the following article number to view the
article in the Microsoft Knowledge Base:

256986 Description of the Microsoft Windows Registry

WARNING If you use Registry Editor incorrectly, you may
cause serious problems that may require you to reinstall
your operating system. Microsoft cannot guarantee that you
can solve problems that result from using Registry Editor
incorrectly. Use Registry Editor at your own risk.

14. Click Start, click Run.

15. In the Run window on the open line type Regedit and
click OK.

16. In the registry editor navigate to
HKEY_Local_Machine\Software\Microsoft\Microsoft SQL Server.

17. Right click on the CRM under the Microsoft SQL Server
Key and choose Delete.

15. Navigate to
HKEY_Local_Machine\Software\Microsoft\MSCRM.

16. If the MSCRM key exists, right click on it and choose
Delete.

17. Close the registry and restart the client machine.


If you are using Microsoft CRM Sales for Outlook version
1.0.3017 use the following steps.

1. Click Start, point to Settings, click Control Panel,
and then double click Add/Remove Programs.

2. Click on Microsoft CRM Sales for Outlook and click
Change/Remove.

3. Wait for the wizard to finish.

4. Close the Add/Remove Programs Window.

5. In the Control Panel window opened in step 1 double
click Administrative Tools and double click on Services.

6. Find the MSSQL$CRM Service.

7. Right click on the service and choose Stop.

8. Close the Services Window.

9. Right click on Start and click Explore.

10. Navigate to C:\Program Files\Microsoft SQL Server.

11. Right click on the MSSQL$CRM directory and choose
Delete.

12. Navigate to C:\Program Files\Microsoft CRM.

13. If it exists right click on the Client folder and
choose Delete.

IMPORTANT This article contains information about
modifying the registry. Before you modify the registry,
make sure to back it up and make sure that you understand
how to restore the registry if a problem occurs. For
information about how to back up, restore, and edit the
registry, click the following article number to view the
article in the Microsoft Knowledge Base:

256986 Description of the Microsoft Windows Registry

WARNING If you use Registry Editor incorrectly, you may
cause serious problems that may require you to reinstall
your operating system. Microsoft cannot guarantee that you
can solve problems that result from using Registry Editor
incorrectly. Use Registry Editor at your own risk.

14. Click Start, click Run.

15. In the Run window on the open line type Regedit and
click OK.

16. In the registry editor navigate to
HKEY_Local_Machine\Software\Microsoft\Microsoft SQL Server.

17. Right click on the CRM under the Microsoft SQL Server
Key and choose Delete.

15. Navigate to
HKEY_Local_Machine\Software\Microsoft\MSCRM.

16. If the MSCRM key exists, right click on it and choose
Delete.

17. Close the registry and restart the client machine.

 

outlook offline - another problem

Posted: 09 Jun 2004 01:08 AM PDT

Hi,

Is CRM on Win 2003 -> then call Microsoft support for hotfix 834859 (see
also --> google --> search 834859)
Had the same problem and it was solved with this (the client was WinXP with
Office 2003)


"Jean-Nicolas" <com> wrote in message
news:google.com... 
issue! 
news:<phx.gbl>... 
of 


Post-Callouts Help

Posted: 08 Jun 2004 10:57 PM PDT

Neil,

If you pull all the code from the MSDN article and perge it together into one
module, and use the SQL scripts provided, it will work. It just takes some
patience and time.

Matt Parks

----------------------------------------
----------------------------------------
On Wed, 9 Jun 2004 07:57:23 +0200, "Neil Hayes" <syspro.com>
wrote:

Hi All,

From reading the various postings I gather lots of people have had problems
with getting post-callouts to work, some of us have made errors in the GUID
used etc. I my self have tried to be carefull and make sure that I've none
every thing by the book and yet my Post-Callout fails to fire.

I've asked my local MS to help, but they are just asking one-liner questions
per day..... I could see this going on for a month before I get a working
concept.

So can I ask.....Please Would someone ZIP up a working solution as well as
the SQL script to use against the meta base and email it to me or post it on
this newgroup. That way I've eliminated all coding errors etc.

I don't mind if the example, writes to the MSMQ/ File or even says 'Hello
World' in the NT Event log, but I need to get started somewhere!

The only SQL script I've seen to use against the meta base for example,
referes to a column IsEnabled.....it seems in version 1.2 this column does
not exist or has changed to IsEnable, yet my questions to the local MS
office don't say 'Yes' or 'No'.

These where the links I used.

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmbscrm/html/mbs_crmpostcallouts.asp

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmbscrm1_2/html/mbs_crmcstmintpostcallouts1d21.asp


Regards

Neil
co.za


Column Labels on Views

Posted: 08 Jun 2004 07:31 PM PDT

Check that both labels were changed on the form... I've
hijacked other fields "industry" into "type" with no
problem...
 
which  
manager,  
Name 
way