Pages

Search

Microsoft Word - Issue when trying to open document in office 2007 on windows 8 laptop

Microsoft Word - Issue when trying to open document in office 2007 on windows 8 laptop

Issue when trying to open document in office 2007 on windows 8 laptop

Posted: 30 Mar 2014 03:22 PM PDT

so I have to download a doc and then open a new words doc, at which point I am asked if I will allow the program to make changes, then I have to open a doc through the blank doc I have opened.
 

Dialogue box is open error word 2013

Posted: 30 Mar 2014 03:18 PM PDT

When I open any Microsoft Word document, I get a dialogue box that reads: "Word can't do this because a dialogue box is open. Please close the dialogue box to continue." The problem is that there is only one dialogue box, the one that tells me to close the dialogue box. When I close the box the document loads normally. It isn't so much a problem as it is annoying. If anyone knows how to stop this box from popping up and pausing the loading of documents I would appreciate it.

How to center page numbers in ms word 2010?

Posted: 30 Mar 2014 02:47 PM PDT

Hi guys,

Can someone one help me with this one?

The page number is already centered yet it's still more to one side than actually sitting in the middle of the page.

Does it have to do with margins?

Thanks in advance.

Cannot insert jpeg picture. Message: picture created in Package.

Posted: 30 Mar 2014 02:30 PM PDT

Running Windows 8.1.  Suddenly Word won't accept jpegs, apparently created by "Package," that older versions accepted.  Do I add this app called Package?  How do I do that?  What picture formats will the new Word accept? 

Also, in this new system I have no idea how to find out what version was installed for me, so when I select "Office Products"  I have no idea what I am doing.

code erreur 30145-27

Posted: 30 Mar 2014 01:52 PM PDT

J'ai installé Office 2013 (pour famille et étudiants) le 18 mars 2014. Le 30 mars, après avoir voulu installer une mise à jour, je n'ai plus accès aux différentes applications de Office (code d'erreur 30145-27). J'ai effectué un nettoyage du disque, comme conseillé par certains, mais sans résultats. Que dois-je faire pour résoudre mon problème ? Merci de votre aide.

Paragraph spacing?

Posted: 30 Mar 2014 01:51 PM PDT

How can I adjust spacing between paragraphs?  All I see is a crude method of adjusting line spacing. 

microsoft not working

Posted: 30 Mar 2014 01:43 PM PDT

how can I speak to a live person

Page Numbering with Office 2007

Posted: 30 Mar 2014 01:27 PM PDT

How do I number a research paper page 2 with a Roman Numerial and page 3 with 1,2,3, etc

Microsoft Office not working - received error message

Posted: 30 Mar 2014 01:07 PM PDT

Something went wrong - couldn't start your program.  Please try starting it again, If it won't start, try repairing Office from "programs and features" in the control panel..

Did that and couldn't restart the program? Please assist.

Thank-you

Cannot save .doc as .docm

Posted: 30 Mar 2014 12:37 PM PDT

I have a Word document that was created in Word 2003 (or possibly Word 97).  It contains a VBA macro.  If I try to save it as a macro-enabled word document (.docm), I am unable.

After selecting Save As / Word Document, the Save As dialog box opens; I change the type to .docm; select Save, and an error message pops up:

Of course, I cannot save it as .docx since it contains a VBA project:

It seems to work properly as an Excel 97-2003 .doc document, but I'd like to figure out why I cannot save it in the .docm format.

Office Starter docs to full 2010 product

Posted: 30 Mar 2014 12:36 PM PDT

Have made a few documents in Word Starter. Now have full licensed product. How do I transfer the 'Starter' docs to the full version? 

I upgraded my computer from Vista Windows to windows 8. I am trying to send an email with an attachment. I am unable to do that? Can you help me with this

Posted: 30 Mar 2014 12:27 PM PDT

In reply to Richard Jordan_H's:

I upgraded about 6 weeks ago and I have not been able to send email with attachment. Why is it I can have so much trouble getting this fixed. I have been to send this email with the attachment for that length of time. Not all of us are business savvy or computer savvy. Why can't we have this fixed when those of us can't get this fix when needed. You want me to ask a question, well there is problem why I upgraded from Vista windows  to Window8  2010 about six weeks ago and I am unable to send an email with an attachment. I am unable to find what needs to be done to fix this. Is there anyone there that can help.

Microsoft WORD & Excel not working

Posted: 30 Mar 2014 11:33 AM PDT

I receive an error message when I try to open a previous word document or excel document created in Word 2013 & Excel 2013. The error message states, "Something went wrong with Word, word has run into an error that is preventing it from working properly.  Word will eed to close as aresult.  Would you want to repair?  When click on repair now nothing happens.  I need help fast because I have several projects that I am working on and need to submit.  Please HELP!!!! SHould I reinstall using my disk?

Blank spaces below text in table cells

Posted: 30 Mar 2014 11:04 AM PDT

After creating a table and filling a row of cells with information of varied length, I am often left with large empty spaces in cells below some shorter texts. This "wasted" space resists deletion.

My general impression is that Word lets me go to the cell with the most data in it, place cursor at end of it, and press delete.

Nothing I do erases the empty space between the end of the text and the bottom line of the cell.

??

pa

My dictionary apps no longer work

Posted: 30 Mar 2014 10:38 AM PDT

My dictionary apps no longer work. When I click "Insert" "My Apps" and click on Bing Dictionary it tries to load but I come up with, "App Error" and a button to restart but nothing happens. It used to work fine. I have uninstalled WORD and reinstalled it but that didn't help. I'm online but it just won't load the App.

Please help,

Jeff

Delete Hyperlink from Picture if One

Posted: 30 Mar 2014 09:25 AM PDT

Hi,

I have a Macro in Word that Pastes an Image from the Clipboard, then Resizes it.

I would also like it to check if the Picture has a Hyperlink, and if it does then Delete the Hyperlink else just exit Macro.

I have a bit of code that I found Online that removes all Hyperlinks on Pictures {See BOLD}, but I need to change this so it only checks the Picture I have Selected.

Here's my Macro:

Sub InsertCoverPicture()
    'Insert the Cover Picture
    With Selection
        .PasteAndFormat (wdPasteDefault)
        .MoveRight Unit:=wdCharacter, Count:=1
        .MoveLeft Unit:=wdCharacter, Count:=1, Extend:=wdExtend
        With .InlineShapes(1)
            .LockAspectRatio = msoTrue
            .Height = CentimetersToPoints(2)
        End With
    End With

    'Remove Hyperlink from Picture
    Dim oStory As Range
    Dim x As Long

    For Each oStory In ActiveDocument.StoryRanges
        With oStory
            For x = .Hyperlinks.Count To 1 Step -1
                If .Hyperlinks(x).Type = msoHyperlinkShape Then .Hyperlinks(x).Delete
            Next
        End With
    Next
End Sub

Thank you in advance,

Neil

Office for iPad - Word not having access privileges

Posted: 30 Mar 2014 08:28 AM PDT

Office for iPad - Word (but not Excel and Powerpoint) not having access privileges.

Error message: "Word cannot open the deocument: user does not have access privileges"

This message is completely inconsistent: about half of my Word files, WRITTEN BY MYSELF with Office 365 Home Premium, open without messaging anything.

Those which do NOT open (also written by myself), demand first logging in to Microsoft account EVERY time I try to load them, but EVERY time they show this error message, denying access.

I do not see any dependency with time and the contents of those simple Word files.

I have not seen this error message in any other Word version in any other device. It pops up only in Word for iPad (iOS 7.1).

Please, forum moderators, care to tell me again that you do not have a slightest clue about this?

Word 2007 doesn't load new documents using the normal.dot or normal.dotm template

Posted: 30 Mar 2014 08:21 AM PDT

I've saved changes to both the normal.dot and normal.dotm templates, in the designated file locations for those files within Word.   

But when I open a new document, it doesn't load the normal.dotm template formatting, but some other set of fonts and paragraphing designations.

How do I correct this?

I've used Word for nearly 20 years.  I'm using a new HP computer running Windows 7.   Thank you for your help.

Date field wrong day

Posted: 30 Mar 2014 05:11 AM PDT

Hello.

Well, I have a template file where I created a date field with the structure "Monday, 10 October 2010". The question is that current day's name doesn't match with the actual day.

So, as an example, today, what is shown on this date field is "Monday, 30 March 2014" but it should be "Sunday, 30 March 2014".

What can be wrong? System date is well set.

Thanks for your help!=)

How to print a document with paper size 11x17 in 8.5x11 paper?

Posted: 30 Mar 2014 04:51 AM PDT

How would I be able to print 11x17 size document in Word 2010 to 8.5x11 paper without corrupting the design and without one-by-one adjusting the size of text & picture. Please help me. Thank you!

Error checking of language

Posted: 30 Mar 2014 04:23 AM PDT

Hello,

In school, we have to learn a second Norwegian language, which is very similar to the one we use daily. There are however, an extensive list of words which are not allowed. To stop myself from making the same mistakes again, is it possible to somehow check for these words?

The spell checking in Word is quite poor for that particular language, as it is used by quite few people. Is there some way I can manually enter them and contribute to the spell checker? I can of course make a list and search for every individual word, but it is quite time consuming. Is it therefore possible to design a macro or use some other fancy ways of comparing two documents and locating the errors, where one of them contains a list of the taboo words?

All help is appreciated.

How to merge the end of two lines

Posted: 30 Mar 2014 02:00 AM PDT

Hello,

I have two information gathered from same table. My problem looks like:

- Information 1 { gathered from ...

- Information 2 { gathered from ...

I would like to make one curly brackets that spans over two lines, instead of having two curly brackets. 

Thanks for the help

Percentage Signs in Charts Backwards (%89, %66, etc...)

Posted: 29 Mar 2014 11:51 PM PDT

Hello everyone,

I have Microsoft Word. Every time I open a document (or create one) all charts I create have the percent sign in the front.

As a work around I create a custom format, putting the % in front, therefore putting in the back on the screen. This is annoying workaround because I edit and review a lot of documents.

Can anyone help? I've never see this problem before and no one else has it.

ms word 365 on iPad

Posted: 29 Mar 2014 10:11 PM PDT

I have a MS Office 365 subscription and I want to use the new apps on my iPad.  My problem is in order to access my subscription i have to sign in through iTunes and my MS Office subscription is through a different email.  I've only used  3 of my 5 licenses for the product.  Why should I have to purchase your product again in order to use it on my iPad?  How can this be resolved?

Word 2013's in-text citation for mla format is inconsistent.

Posted: 29 Mar 2014 09:31 PM PDT

In MLA format the in-text citation is inconsistent. I really have no idea why it just randomly changed.... 

More info in the picture....

see on the top paragraph the citation is (last name and page number[edited by myself]), then it suddenly changed in the bottom paragraph showing (last first).... I don't get this... why is this even happening?

Office iPad and OneDrive Issues - Missing Folders

Posted: 29 Mar 2014 09:09 PM PDT

After trying out Office Word, Excel and Powerpoint on my iPad it seems to me that OneDrive integration is broken.

The main problem is that various folders do not show up in the Office Apps on the iPad. These missing folders though do show up in the OneDrive app for iPad.

I've also had the Office Apps lock up when trying to refresh a folder. Either the program locks up and I have to restart it or, the refresh icon just spins forever.

To troubleshoot the issue I've removed the Word app, reinstalled and reconnected my OneDrive account. I've done this a couple of times and each time when I try to view one of my folders, the app hangs. After restarting the app the folder I was trying to view has missing subfolders.

If I add a subfolder after I've viewed the folder in Word (for example) the new folder shows up. However, none of the folders that are missing will ever appear, no matter how many times I try to refresh the folder.

Oddly enough the missing folders are different between Word, Excel and Powerpoint.

My "Mac Docs" folder should have 25 folders. Word shows 16 folders, Excel shows 9 and PowerPoint shows all 25. However, PowerPoint also has trouble refreshing the folder, and after I've removed some folders, its still displaying the removed folders.


Office on iPad has great potential for me, especially with OneDrive integration, however, at this stage it appears to be quite buggy.

bug report - opening documents created on a network PC

Posted: 29 Mar 2014 09:00 PM PDT

hello,

I recently created a document at work, on a computer that uses network drives, ie. my documents is \\user\<employee number>\My Documents\

I then sent the document to my home PC and opened it with Office 2013. It freezes on the splash screen, as the program appears to be trying to retrieve something from the (non existant) network drive (i don't have a network drive on my home PC).

If this could be looked into and fixed it would be appreciated.

Something went wrong We couldn't start your program. Please try starting it again NO ERROR CODE

Posted: 29 Mar 2014 07:31 PM PDT

This happens when I click on any of the Microsoft office icons: Microsoft, Please put your **** together, I paid money for this software and I expect it to work when I click on the icon of the software, I do NOT have time to read hundreds of threads in forums or follow "workaround" instructions to fix this problem. TIME IS MONEY AND YOUR ARE COSTING ME MONEY.I NEED THIS FIXED OR REFUND MY MONEY BACK. Ivan

Add Acrobat XI ribbon to Word Starter 2010

Posted: 29 Mar 2014 07:09 PM PDT

Is it possible to add the Acrobat XI ribbon to Word Starter 2010, and if so, how?

Select a Printer in Word using VBA

Posted: 29 Mar 2014 05:51 PM PDT

Hi,

I have  a Macro to update some DocVariables then for me to select which printer I wish to use from a list of 2.

I am using the procedure from an Excel Macro that I've set before, but it is not working in word.

My problem is that my Input Box is in a loop that I cannot leave unless I press CTRL+BREAK.

Please can you have a look at my Check Input section BOLD below...

Please note that I would like the input to be checked that it is a Number, and that the number is 1 or 2, and if Cancel is Clicked then Exit Macro.

Sub PrintCheckList()
    'PrintOut Time Change Check List

    'Settings
        'Variables
        Dim PlusMinus As String
        Dim ChangeHour As String
        Dim Default_Printer_Name As String
        Dim MyPrinter As String
        Dim Printer_Name As String
        Dim Printer_Name1 As String
        Dim Printer_Name2 As String
        Dim Printer_Name0 As Variant

        'Defaults
        Default_Printer_Name = Application.ActivePrinter
        Printer_Name1 = "Kodak ESP+7 on Ne01:"
        Printer_Name2 = "HP Photosmart B110a Series on Ne02:"
        PlusMinus = ""
        ChangeHour = ""

    'Set Change Details
    If Month(Now()) = "3" Then
        PlusMinus = "+"
        ChangeHour = "1:00am"
    Else
        PlusMinus = "-"
        ChangeHour = "2:00pm"
    End If

    'Update the Document
    With ActiveDocument
        .Variables("PlusMinus").Value = PlusMinus
        .Variables("ChangeHour").Value = ChangeHour
    End With

    'Update all Field Codes
    For Each FCRange In ActiveDocument.StoryRanges
        For Each FCField In FCRange.Fields
            FCField.Update
        Next FCField
    Next FCRange

Question:
    'Question to Set the Printer to Use
    Printer_Name0 = InputBox("Please select the Printer you wish to use..." + Chr(10) _
        + Chr(10) _
        + "     Please enter the Number for the Printer..." + Chr(10) _
        + Chr(10) _
        + "          1. " + Left(Printer_Name1, Len(Printer_Name1) - 9) + "." + Chr(10) _
        + "          2. " + Left(Printer_Name2, Len(Printer_Name2) - 9) + "." + Chr(10) _
        + Chr(10) _
        + "   The Current Printer is " + Chr(147) + Default_Printer_Name _
        + Chr(148) + "." + Chr(10) _
        + Chr(10), "Print Video Tickets...", 1)

    'Check Input
    If Printer_Name0 = vbCancel Then
        Exit Sub
    ElseIf Not IsNumeric(Printer_Name0) Or Printer_Name0 < 1 Or _
        Printer_Name0 > 2 Then
        GoTo Question
    End If

    'Goto Printer from your Selection
    If Printer_Name0 = "1" Then
        GoTo Printer1
    ElseIf Printer_Name0 = "2" Then
        GoTo Printer2
    End If

Printer1:
    Printer_Name = Printer_Name1
    Application.ActivePrinter = Printer_Name
    GoTo Print_Out

Printer2:
    Printer_Name = Printer_Name2
    Application.ActivePrinter = Printer_Name

Print_Out:
    ActiveDocument.ActiveWindow.PrintOut _
        Range:=wdPrintFromTo, _
        From:="1", _
        To:="1"

Cancel:
    Application.ActivePrinter = Default_Printer_Name
End Sub

Thank you in advance,

Neil

Microsoft Works - Preventing duplicates in Works 8.0

Microsoft Works - Preventing duplicates in Works 8.0

Preventing duplicates in Works 8.0

Posted: 13 Nov 2008 11:13 AM PST

OK Kevin

Thanks

"Kevin James" wrote:
 

Will Works 9 open Word and Excel Files?

Posted: 13 Nov 2008 09:04 AM PST

On Thu, 13 Nov 2008 14:35:14 -0800, "Michael Santovec"
<net> wrote:
 

That is not a problem at all, since my sister-in-law BARELY
uses Excel, certainly nothing advanced, and is more concerned
about being able to open her existing Word files... and, even
with those, she is a one file at a time user, without any of
the advanced featurs like mail-merge

Just knowing that W9 will open her files is all we need

Thanks... John

Entry Point Not Found

Posted: 12 Nov 2008 09:41 PM PST

I followed the link & that's my problem however the solution requires me to
use the Works CleanUp Utility which it says is in the Works 8.0 installation
CD. Since Works came preinstalled on my computer I don't have a Works 8.0
installation CD. I did download & run the Windows Installer CleanUp Utility.
I tried to reinstall again but got the same error message. What now?

"Kevin James" wrote:
 

Migrating Works spreadsheet File

Posted: 12 Nov 2008 08:51 PM PST

Mike:
Thanks for responding. Are you saying that Works will find the folder even
though it may not have some particular name? Or do I have to be sure it has
a particular name? How would Works find it? Not sure I understand.

"Michael Santovec" wrote:
 

problems with microsoft works 9.0

Posted: 11 Nov 2008 07:59 PM PST

LifeIsGood wrote: 

How did your daughter;

1. Save the file from (not to) Works
2. Exit/ quit Works
3. Shut down Windows

.... after she had done this work? Doing any of these things unsafely can
indeed result in corrupted files.

How to set default font?

Posted: 11 Nov 2008 01:50 PM PST

Thanks for letting me know it worked.

Ken

"Ron" <net> wrote in message
news:phx.gbl...

| Ken: Thanks a lot - works fine. May never have found it! Ron
|
|
| "Ken" <Thanks> wrote in message
| news:phx.gbl...
| > Hi Ron,
| >
| > Perhaps this knowledge base article will help.
| >
| > How to change the default font in the Word Processor when you use
| > Microsoft
| > Works
| > http://support.microsoft.com/kb/250307/en-us
| >
| > Ken
| >
| > "Ron" <net> wrote in message
| > news:OmcC%phx.gbl...
| > | I am running Vista Home Premium with Works 8.5 preloaded. My default
| > font
| > is
| > | Times Roman which I do not use very often. I use Arial but have to
| > manually
| > | set it each time I use it. I've have looked everywhere I know to find
| > how
| > | to set Arial as the default but have had no luck. Does anyone know
how?
| > | Much thanks.
| > |
| > | Ron
| > |
| >
|

Networking problem with works 8.5

Posted: 11 Nov 2008 03:25 AM PST

bcaines wrote: 

These seem like a reasonable things to allow, rather than problems.

Most networked IT would be crippled if only one person were allowed to
read a file at a time... consider, for example, the World Wide Web which
involves potentially millions of people reading the same file at the
same moment.

Or the operating system you're using now, in which many processes need
to read the same file simultaneously in order to run programs.

multi-column report

Posted: 10 Nov 2008 11:18 PM PST

On Nov 11, 9:00*am, "Kevin James" <gov.net> wrote: 

Okay, thanks. I couldn't find any examples of such formatting, so I
had gone ahead in the interim and fleshed out the 'empty space' by
including the fields for 'Date Paid' and 'Expires', so the person
checking memberships can tell who is close to needing a renewal and
police accordingly.

Thanks,

Monte

Help with Spreadsheet Formular

Posted: 10 Nov 2008 08:18 AM PST

You are welcome and thanks for posting back.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Birdflu" <microsoft.com> wrote in message
news:com... 

How to slow scrolling when selecting a passage in Works Word Procesor?

Posted: 09 Nov 2008 12:35 AM PST

Thanks for good help, Duncan and Kevin.

- Ken (in Oz)

Where to find detailed syntax information for Works?

Posted: 08 Nov 2008 09:07 PM PST

On Nov 10, 12:02*pm, "Kevin James" <gov.net> wrote: 

Kevin,

Thank you for the generous offer; at the moment I don't have a
specific formula question at hand - I was able to get something
hammered out by digging through the archives here and copying it and
tweaking it until it worked. I do have some report formatting
questions, but I'll start a new thread for that.

Thanks,

Monte

Spell-checker function tardy and/or selective and/or not functioningat all

Posted: 08 Nov 2008 08:00 PM PST

I suspect that you are exceeding the capacity of the program. And I
doubt there is any thing you could do in the program.

If you do a manual spell check (F7) does that catch the misspelled
words? If so, with long documents you'll have to do that.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Ken" <net.au> wrote in message
news:#phx.gbl... 

works4.5a fix for saving to doc instead of wps

Posted: 08 Nov 2008 10:48 AM PST


"pen" <com> wrote in message
news:phx.gbl... 

I followed the directions and was able to restore the .rtf save option but
then the old problem with Works trying to save as a .doc reappeared. I
tried both restoring 2 & 3 and deleting all of 1 & 4 then tried leaving 1&4
as per the original "fix" while restoring 2&3. The results remained the
same. Currently I've gone back to the original "fix". Maybe I did
something wrong?

Works Address book Corupt????

Posted: 05 Nov 2008 06:08 PM PST

Microsoft windows came with the new tower I bought, and I used the address
book converter at the time to get all my address' transferred over .

"kjgrwv1" wrote:
 

Text Changes

Posted: 05 Nov 2008 02:18 PM PST


Re: Thanks Ken. It's off now and the problem is gone

You are welcome, thanks for letting me know.

Ken


"tooh" <net> wrote in message news:JGoQk.52$iad...
| Thanks Ken. It's off now and the problem is gone.
|
| "Ken" <Thanks> wrote in message
| news:phx.gbl...

| > Have you tried turning off AutoCorrect?
| >
| > AutoCorrect is on the Tools menu.
| >
| > Ken
| >
| > "tooh" <net> wrote in message
| > news:7cnQk.98$iad...
| >
| > |I can type a 6 character alpha string and on hitting enter the string
| > | displayed (also 6 characters) is different. What causes this and how
do
| > I
| > | correct? Example : sertfi is typed and after hitting enter the
display
| > is
| > :
| > | termno
| > |
| > |
| >
| >
|
|

Publishing program has too many fonts

Posted: 05 Nov 2008 08:28 AM PST

I'd go for removing Print Master. If you remove a wrong font you can have
all sorts of trouble. HP support "helped me" when my PC was new and make a
long story short, ended doing a reload of operating system. I am using XP
media center edition 2005. Also watch the HP Officejet all in one printers
and how they interface with Works. Nothing but out of memory errors which
requires a work around.

I would never use Print Master on my PC again but I'm sure it's being used
by many people but don't know if those people have Woks installe.

Good luck.

"Holly B" <Holly microsoft.com> wrote in message
news:com... 

ms works 8.5

Posted: 03 Nov 2008 10:12 AM PST

Thanks for ur suggestions, nothing helped plus I received another error msg
when I had my spreadsheet open & tried to open a new one so I could could
copy & paste some info. I'm thinking my works is corrupted so will have to
purchase something else. Thanks again, Linda (Tango)

"Michael Santovec" wrote:
 

Printing Labes From a Partially used sheet

Posted: 22 Oct 2008 12:49 PM PDT

Tks for your reply

"CD" wrote:
 

Multiple email addresses question - Microsoft Exchange

Multiple email addresses question - Microsoft Exchange

Multiple email addresses question

Posted: 26 Jun 2006 12:35 PM PDT

Thank Tim, I really appreciate it.
Will this work if the new organizations are not part of the exchange server?
They have their own systems and will creat mailboxes for users from our
organization and then they will forward any emails to each user email address
in our organization.
Thanks again.

"Tim C" wrote:
 

Can't rerun /forestprep

Posted: 26 Jun 2006 07:59 AM PDT

working from memory here, but wasn't this problem created if you ran Outlook
on a machine with ESM installed? Or changed permissions for Virtual
Directories related to OWA?
Can anyone confirm or refute?

"Tim C" <com> wrote in message
news:phx.gbl... 

updating

Posted: 26 Jun 2006 07:04 AM PDT

Thank you for your responce. Is there a registry entry that would prevent
updates?

"Mark Arnold [MVP]" wrote:
 

GAL display in OWA

Posted: 23 Jun 2006 04:27 PM PDT

Ahh.... that's it - you won't let me plug MessageWare... :)
Hey.. they're Canadian ( Mississauga)... fwiw.. :)
--
Bharat Suneja
MVP - Exchange
www.zenprise.com
NEW blog location:
www.exchangepedia.com/blog
----------------------------------------------


"David Elfassy" <netlogon.ca> wrote in message
news:phx.gbl... 

moderated email distribution list

Posted: 23 Jun 2006 11:56 AM PDT

Creating and Using Moderated Public Folders in MS Exchange Server
http://www.msexchange.org/articles/Creating-Using-Moderated-Public-Folders-Exchange-Server.html

--
Bharat Suneja
MVP - Exchange
www.zenprise.com
NEW blog location:
www.exchangepedia.com/blog
----------------------------------------------


"Leni1" <microsoft.com> wrote in message
news:com... 

SMTP Log reports incorrect connection times

Posted: 23 Jun 2006 01:58 AM PDT

Cool.
Thanks Mark.

"Mark Arnold [MVP]" wrote:
 

How Forward all sent items from a user in EXCHANGE 2003?

Posted: 22 Jun 2006 12:49 PM PDT

There's no way to do this unless you have both users using the same mailbox.
"Pierre Delpierro" <microsoft.com> wrote in
message news:com... 

Out-of-Office working internally but not externally ??

Posted: 22 Jun 2006 11:16 AM PDT

It's not really an issue, it's just a setting on the Exchange server. You
may want to be careful with that because it would make you vulnerable if an
outsider (that you don't know) finds out that you're out of the office.

"MLK" wrote:
 

Exchange 2003 Size limits

Posted: 22 Jun 2006 11:16 AM PDT

Yes. It is independent of the Operating System.

"Greg" <microsoft.com> wrote in message
news:com... 

Oversize messages scheduled for delivery after hours never get sen

Posted: 22 Jun 2006 04:32 AM PDT

We're only using 1 connector.
Accepts mail up to 11Mb, but meant to send items over 7mb after hours.
Configured to send using DNS.

I've seen a similar problem once before but on a routing group connector,
same story where it just sits in the queue and never gets sent. And I wasn't
able to fix that one... I mean its something that's meant to just work, but
it doesn't...

Any ideas? ... Anyone!? I'm fresh out.


"Mark Arnold [MVP]" wrote:
 

Sending Meeting requests from one Exchange 5.5 organization to another

Posted: 21 Jun 2006 07:44 AM PDT


"Mark Arnold [MVP]" <org> wrote in message
news:com... 

It appears to be me to all orgs, well, at least all that I've tested :-).


Regards,
Brian

Mail Sent Bounce back (NDR) when move mailbox

Posted: 21 Jun 2006 12:36 AM PDT

Make sure you do not have any AD replication issues as well.
"Fui Fan" <microsoft.com> wrote in message
news:com... 

How do I assign Team/People Responsibilities to Individual Tasks Microsoft Project

How do I assign Team/People Responsibilities to Individual Tasks Microsoft Project

How do I assign Team/People Responsibilities to Individual Tasks

Posted: 11 Apr 2005 08:27 PM PDT

Jan,

Thanks, I had tried a large percentage for the resource but only up to 500%
so I'll try the "fixed task duration" method first and if that fails then
I'll try your 5000% resources.

Thanks - IAN

"Jan De Messemaeker" wrote:
 

No data to view

Posted: 11 Apr 2005 06:35 PM PDT



"John" wrote:
 

<!-- ProjectGuideMainpage -->

<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
<meta http-equiv="MSThemeCompatible" content="Yes">
<title> Microsoft Project </title>
<script src="gbui://mainpage.js" language="JScript"></script>
<script src="gbui://util.js" language="JScript"></script>

<script language="JScript">
try
{
initMainPageData();
initDefaultSettings();
loadSavedSidepaneProperties();
}
catch(exp)
{}
</script>

<!-- TextCont object -->
<object id="TextConv"
classid="clsid:1CFC2250-9B5C-4546-ABA1-1F69A06DCA12"
type="application/x-oleobject"
style="display: none">
<span>TextConv failed to load!</span>
</object>

<!-- Document events handlers -->
<object id="MSPJDocObj"
ALT="Microsoft Project Document Event Handler"
classid="CLSID:494B3458-3EFF-4C66-9C86-D47670D69634"
style="display:none">
</object>

<script for="MSPJDocObj" event="Open(pj)" language="JScript">
try
{
handle_DocumentAfterOpen(pj);
}
catch(exp) {}
</script>

<script for="MSPJDocObj" event="BeforeClose(pj)" language="JScript">
try
{
handle_DocumentBeforeClose(pj);
}
catch(exp) {}
</script>

<script for="MSPJDocObj" event="BeforeSave(pj)" language="JScript">
try
{
handle_DocumentBeforeSave(pj);
}
catch(exp) {}
</script>

<script for="MSPJDocObj" event="BeforePrint(pj)" language="JScript">
try
{
handle_DocumentBeforePrint(pj);
}

MS Project 2000 - Drawing Lines

Posted: 11 Apr 2005 11:53 AM PDT

Actually, may I give you an example of what she wants:

Task 1 - Mary, John, Steve and Paul
Task 2 - Mary, John, Steve and Paul
Task 3 - John and Paul
Task 4 - John and Paul
Task 5 - John and Paul
Task 6 - Peter, Victor and Don
Task 7 - Brian and Susie
Task 8 - Brian and Susie

This very primitively shows a task and the resource names which appear at
the end of the timeline. Well, everytime the group of resource names changes,
she wants a thicker line drawn for the border of that task. That means,
given the above example, she wants a thicker line in the Gantt Chart for the
line at the bottom of the row for the following:

Task 2
Task 5
Task 6
Task 8

Hope that helps. (It doesn't seem I can do this using Groups as some of the
individuals are involved in two separate groups - e.g. Paul is involved in
the Task 1, 2 and 3 grouping but is also invovled in Tasks, 4, 5 and 6.


"JackD" wrote:
 

Enterprise Status and Finish Date different than Project Info

Posted: 11 Apr 2005 09:38 AM PDT

Ray --

Here's the key: if you are entering task updates directly in the Microsoft
Project plan, then you must click Collaborate - Publish - Republish
Assignments to "push" the assignment information to PWA. If team members
enter actuals in PWA and then you update the actuals into the Microsoft
Project plan, you simply need to click Collaborate - Publish - All
Information. Hope this helps.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
"We wrote the book on Project Server"


"Ray Powers" <microsoft.com> wrote in message
news:com... 

Millennium Edition - Viewers2

Posted: 11 Apr 2005 09:33 AM PDT

Maybe I'm confused but you don't open the Word viewer in Wordpad or the
Excel viewer in Works Spreadsheet. Both of them would be standalone
executable programs, intended to allow someone to view Word documents or
Excel spreadsheets who otherwise doesn't have software installed capable of
opening those file types. Once you install them by running the executable
file you download, you find them in the Windows program menu. When you run
them from the menu, you can open a .doc (Word) or .xls(Excel) file and read
their contents just as if you had Word or Excel themselves installed
respectively.

Here's a link for the entry page all the discussion groups for the various
MS Office products - you'll notice both Word and Excel are included there in
the menu on the left side of the page ...

http://www.microsoft.com/office/community/en-us/default.mspx

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



"cinderellafe" <microsoft.com> wrote in message
news:com... 

VBA routine for Project to Edit Taskname field

Posted: 11 Apr 2005 08:57 AM PDT

Hi,

A completely blank line gives a task which is a Nothing object
Since that has no properties it would give a Run Time Error.
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"Ken Wright" <com> schreef in bericht
news:com... 
or 
specialcells 
that 
it 
blank 
why 
good 

Ms Project resource levelling algorithm

Posted: 11 Apr 2005 06:35 AM PDT

Thank you all for responses.


"Elena Osipova" пишет:
 

how to set up a bid for a construction project

Posted: 10 Apr 2005 11:01 AM PDT

That would depend on a lot of factors. How experienced are you with
Windows software? Do you know anything about scheduling, especially
critical path scheduling? What do you need from the software? Just a
Gantt Chart, or more extensive views? How much time, money and effort
are you willing to invest to accomplish this?
In this forum, you'll find that most of us favor Project, but for some
kinds of work, other software is better.
You really need to do a needs assessment to find out what will serve
you best, or you may find yourself, like many others, with the software
determining how you manage your projects, rather than you managing the
way you need to and using the software to aid in that process.

Update report

Posted: 07 Apr 2005 12:51 PM PDT

Hi Ricky,

Did you mean a paper report? If so, you could use the Who Does What When
report under Views/Reports. Alternatively, if you set up a new table with
the columns you want filled in, you can then filter this for each resource
and print it out. You could also create headers/footers which put in a
signature block and the date when the report is due, etc, (there's nothing
like having to sign for something to focus the mind on accuracy and
honesty!)

FAQs, companion products and other useful Project information can be seen at
this web address: http://www.mvps.org/project/

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP



Ricky P wrote: 

Different finish dates on tasks with same start date

Posted: 07 Apr 2005 11:53 AM PDT

I finally figured out what it was. The project with the earlier date had a
standard calendar alright, but didn't have the holidays put in like the later
date had. Duh! Thanks anyway for your help.

Neill

"Brian K - Project MVP" wrote:
 
Subscribe to: Posts (Atom)