Pages

Search

Microsoft Word - converted pdf to word 2010 - how identify superscripts to change style?

Microsoft Word - converted pdf to word 2010 - how identify superscripts to change style?

converted pdf to word 2010 - how identify superscripts to change style?

Posted: 22 Jun 2014 02:40 PM PDT

I converted a pdf document to Word 2010.  This makes all of the text Normal style by default.  The formatting may be different than the Normal style, however.  For example, footnote numbers are small font superscripts.  

I want to decrease the text font and line spacing.  However, if I select all the text to make these changes or change the Normal style, the footnote numbers become the same font as the regular text and are too large.  

Is there a way to select all of the footnote numbers and give them a different style than Normal?  Or is there some other solution that would preserve the small font of the footnote numbers?

Hope I am being clear.

Thank you.

Strange List Template Behaviour with Word Styles Task Pane

Posted: 22 Jun 2014 02:30 PM PDT

Hello,

I'm hoping someone has encountered this strange behavior before and knows of a way to make it not happen.

Word 2010. SP2, Windows 7.  I suspect this was happening as early as Word 2003 because I have encountered the problem before, but only today decided to try to determine what causes it..  It bit me today because I didn't notice right away and had to throw away my work and start again.

Word sometimes creates 10 unused list templates in document without my telling it to do so.  As it always seems to happen to me when I'm setting up a new master style set or new templates, I had the opportunity to chase it today, and found it.

It happens when I merely "look" at the built-in Word styles.  Typical happening today, I was preparing a template and wanted to pre-activate some of the built-in styles so that they don't get introduced into the document via a formatted paste from a legacy DOC (and, hence blow up my plan with font themes).

I found that if I change the styles task pane to "Show All styles" and merely breeze the mouse over the built in List styles (and that with the style pane preview OFF), it brings the unwanted list templates into the document.  Curiously, the "in-use" property of those styles remains "false".

It happens much more easily if the style task pane preview is on.

There is a way to avoid, and that is easy to forget and it won't work even my power users, as they will likely forget.

I would expect of course that if I apply one of this styles, a list template would be introduced, but merely viewing should not, imo, result in a new list template in the document.  Please do tell me this is not by design!!!!!

Its always my practice to release new templates in a "clean" state. Having 10 unused list templates is not desirable.  All of my automation is in-process so I lack an easy way to remove them.

Thank you very much.

/jw

Installing Word 2013 for Personal Use

Posted: 22 Jun 2014 12:44 PM PDT

A few minutes ago I purchased a monthly subscription of Word 2013 for Personal Computer.  I received an error 32-4.  What do I do now?

Copy table from excel

Posted: 22 Jun 2014 12:18 PM PDT

Hello,

I do a report of about 80pages including many tables which I take from excel.

When I copy from excel and paste to Word as a table, the formatting gets distorted. The worse thing is that cells with numbers doesn't get aligned as selected. I noticed that there is some blank space added in front or after the number which I have to go from cell to cell and delete mnually. This takes a long time if the table has many rows and columns of numbers.

Please help me to overcome this.

Thanks

SS

Microsoft 15.0 Word 2013

Posted: 22 Jun 2014 12:14 PM PDT

When I try and open my Microsoft word it comes up with this comment: 'Sorry, something went wrong and word was unable to start. (40)'

Why is this happening and how can I resolve it?? Please help!!

I have Office 2007 Product key and disc but unable to access or edit files. Please help!

Posted: 22 Jun 2014 10:37 AM PDT

I have Office 2007 Product key and disc but unable to access or edit files.  Please help!  When I open a file and enter setup and enter product key I receive an error message.  

Where is the "insert section break" in the ribbon in Word 2010?

Posted: 22 Jun 2014 10:21 AM PDT

I need to insert a section break into my document using Word 2010.  Where is the "insert section break" feature in the ribbon?  I found the "insert page break" in the Insert menu on the ribbon but there is no "insert section break" on this menu.

In Word 2002, when menus were simple and easy to use before the ribbon, I could just go to the Insert menu and insert any type of break that I needed.  Now, when I need to do something in Word or any other Office product, I spend 1/2 my time searching the Internet to find out where in the ribbon the feature is that I need.  Such a waste of time.

Can anyone tell me where the "insert section break" feature is in the ribbon?  

Even better, is there a way to find out the menu / menu item mappings from the old, easy to use Office suite to the new Office suite with the painful, twisted ribbon?

Thanks very much.

copy address data from 1st page to every other page in the same location.

Posted: 22 Jun 2014 09:34 AM PDT

Hi everybody

I am trying to figure out how to automatically copy the address and ref number on the first page onto every other page in the document. I'm not sure of the bast way to do this as some have told me to use a macro and others have mentioned using a userform. I just want to fill in the first page with a name, address and ref number and have it populate on every other page. Any help would be greately appreciated!

Copy a Web generated letter into a word document

Posted: 22 Jun 2014 09:26 AM PDT

Hi Everybody

I hoping someone can tell me the easiest way of copying a letter generated in html (displayed in a browser) over to Word so I can save it. I've tried 'file' then 'save as' and the option isnt there and wondered if there's a way to do this.

NEGATIVE distance value between paragraphs?

Posted: 22 Jun 2014 09:20 AM PDT

Hello! In Word 2010, how can I set a NEGATIVE value for the distance before and after a specific paragraph?

Outlook Warning on Microsoft Word during Mail Merge

Posted: 22 Jun 2014 09:07 AM PDT

Hi,

When I use Microsoft Word to do a email mail merge with an excel document, this warning appears. I never used my outlook account for the mail merge. This only happens when I complete the mail merge. Is this normal or does my computer have an issue?

Thanks!

Paul

"A program is trying to access e-mail address information stored in Outlook."

Printing Word Documents from Folder

Posted: 22 Jun 2014 08:32 AM PDT

<duplicate questions merged into one thread and moved to Office forum>

For work i have to print word documents from a folder. But everytime Microsoft Word on Win 7 opens the document. Also printing multiple documents doesn't work all the time.

When i do the same with PDF documents, no problem at all. All i have o do is right click and print. Done.

Is this also possible with word?

thank you

Update Shauna Kelly's Beginner Pages

Posted: 22 Jun 2014 05:35 AM PDT

I often refer people to Shauna Kelly's Basic Concepts Pages.

Basic concepts of Microsoft Word: An introduction by Shauna Kelly

I think these are one of the best explanations of how to use Word effectively. Peter McWilliams wrote "The Mac is Not a Typewriter" back in the '80s and this is the MS Word equivalent in my opinion.

However, these pages are written for the menu versions of Word. They also start out directing people to use Text Boundaries. While the concepts still apply, I suspect many beginners will stop reading when they get to something that does not work in the Ribbon versions as instructed. Turning on Text Boundaries display in Word 2013/365 (and probably later) is enough to confuse anyone (except possibly the people designing Word).

I would be willing to spend the time to put together a ribbon version of the pages if anyone could post them on her site. I would welcome help. I would want the pages to note that they were based on her pages but not done by her. I would not want credit for the work. An alternative would be to adapt them on my own site, much as I did with the Legal Users Guide designed for Word 2000, but I am uncomfortable doing so. This could also go on the MVP site.

Change Word 2013 default language, while remaining a different keyboard input language.

Posted: 22 Jun 2014 03:53 AM PDT

Dear Windows-Comunity,

hello everybody, it's my first question. I have a problem: I have german laptop, thus I have german keyboard, but I usually work in English, since I am working abroad. When I want to right my reports, letters and other documents in Word 2013 it always changes back to German, although I set the default language in Word to English. I tried to set also the default keyboad input language also to English, but since my hardware is German it's more confusing in this way.

So guys, do you have an idea to set the default language of Word 2013 on a Win7 (64bit) system to English and remain the input keyboard language of the OS in German?

Thanks in advance for your help.

Best regards,

Thich Quang Duc

microsoft word problem - when opening a blank page

Posted: 22 Jun 2014 12:14 AM PDT

When I open a blank page in microsoft word there is a pop up that says 'microsoft has stopped checking for a solution' . I have office 365.

If anyone knows a solution,can you please let me know.

Moved from Windows 7 Programs Forum.

Microsoft office won't start

Posted: 21 Jun 2014 07:48 PM PDT

I've been trying to use Microsoft Office for the past few days but i get an error message. Its getting pretty frustrating considering i need to use Microsoft Office on a daily bases i hope this can be resolved pretty soon.

Styleref or Other

Posted: 21 Jun 2014 04:42 PM PDT

I have a document where other people have put a manually-entered text picture down the top left of every page, as a tab indicating the section.

The Styleref function could be used to determine the current section, and I tried to use the Watermark capability to position the styleref text in the right place.

Didn't work because couldn't use a function in the Watermark. 

Is there another way I could position a variable name for each section, possibly attached to the header, down the side of each page.

How to play audio CDs with linux? - Forums Linux

How to play audio CDs with linux? - Forums Linux

How to play audio CDs with linux?

Posted: 06 Jul 2006 07:04 PM PDT

Michael Mauch wrote: 

THANKS! I've done as you suggested and now CD audio works
perfectly for the non-root user. So, everything is now set all right.

Unruh wrote: 

Actually, by running 'gpasswd -a your_user cdrom' user was
added to group cdrom in /etc/gpasswd and /etc/group and this
achieved the objective. As Aragorn pointed out later, I do have
udev on my system, which would reset permissions at bootup.
The system now works fine, so I'm not going to experiment
further with permissions...

Aragorn wrote: 

I want to thank everyone who participated in this thread for all the
precious advice I got here. These newsgroups are truly a goldmine
of knowledge, and you guys are what makes this a reality.

So, to resume the steps which solved the sound problems
in my system:

1) Initially I would get an error message when attempting to run
KsCD to play an audio CD as the non-root user. By running KsCD
as root, which took care of the error message, it was established
that there was an access permission problem. But still there was
no sound.

2) Some suggested that a missing cable between cdrom drive
and sound card could be the problem. Others said it could
not be an issue here. I checked and there was no cable.
I added a cable connecting cdrom drive and cd audio connector
on the motherboard. Still no sound for su. But the music
could be played by plugging a set of earphones directly into
the cdrom drive.

3) Sound for root was made possible by unmuting and turning
up the cd volume control in alsamixer. (Very stupid, isn't it?
but I had overlooked it).

4) Finally, access permissions for non-root user.
'ls -lL /dev/cdrom' produced:

brw-rw---- 1 root cdrom 22, 0 Jul 7 08:25 /dev/cdrom

showing that non-root user had no access to /dev/cdrom.
Non-root user was given access permission and added
to group cdrom by running:

'gpasswd -a user_name cdrom'

After logging out of XWindows then logging in again, audio CD
playing now works perfectly also for the non-root user.

Again, thank you all!!!

Gianni

GRUB advanced configuration

Posted: 06 Jul 2006 11:55 AM PDT

In message <com>
"Nico Kadel-Garcia" <net> wrote:
 

The simple way, and the default in most cases, is to allow the
installer to set up GRUP with a choice of Linux versions plus a
Windows version. Choosing Windows then uses the contents of boot.ini
to present a Windows boot menu. This doesn't get quite what you want,
but it is simple, and pretty standard.

You might find that the installer has detected both windows versions
and put them into GRUB - in that case I would first try editing the
boot.ini in one of the Windows versions to get it to offer a choice,
and when that is successful, change the grub config file so it only
offers that version of Windows (and change the description maybe to
"Windows boot menu")



--
Alan Adams, from Northamptonshire
freeserve.co.uk
http://www.nckc.org.uk/

SATA drives insanely hot and lm-sensors not working

Posted: 06 Jul 2006 03:02 AM PDT

Jean-David Beyer wrote: 

Hmmm. They are not quite painful to touch, but I would say not far off.
IME all SATA drives run at a temp where I can handle them but they feel
noticeably not. I would not call it painful, but it would be painful if
it was only a little hotter.

I guess this is hotter than drives ought to be, but I don't see any
solution. Like I said, *all* my SATA drives run that hot, regardless of
which mfr, which machine they're in, how many fans etc.

CC

How to backup the files printing from graphics window?

Posted: 06 Jul 2006 02:24 AM PDT

The Natural Philosopher <a@b.c> writes:
 
 
 

The unix print jobs go to a print controller which caches the files into a
directory while they are being printed. That directory is /var/spool/cups,
with files starting with c being control files. On my system, those control
files are not erased. This leaves you with the name of the files printed,
the person, the format, the time, etc. (It is a partly text partly binary
file).

Second serial ATA drive does not work

Posted: 04 Jul 2006 04:23 AM PDT

Yes, here everything is up to date. Both drives are listed.
Greetings, Volker

bootup problem

Posted: 04 Jul 2006 03:37 AM PDT

On Fri, 07 Jul 2006 15:23:54 +0000, dave frost wrote:
 

First, let me correct my mis-statement above:
Usually, the root filesystem is mounted readonly, until the kernel is
ready.
 

Apparently, /proc is an exception to the readonly rule. The mount
command for /proc is successful, I guess, because proc is a
pseudo-filesystem which indicates the state of the kernel. The state of
the kernel is dynamic. BTW, for the mount command to be successful, the
mount point /proc must exist. For example, this command fails on a
readonly filesystem:

mkdir /proc

But, this command is successful (if /proc already exists):

mount -n proc /proc -t proc
 
Note: comments inline.

Startup scripts are distribution dependant. The SYSV startup scripts
that are used by most distributions are complex. I don't envy your
task of reinventing all of the startup scripts. Probably, the starting
point is a thorough understanding of the jobs performed by the existing
scripts before attempting to change or replace them. Without proper
startup, your system may lack the functionality that you'd expect. One
way to visualize this is to boot using only the kernel and root
filesystem by performing a simple exercise. Try this: specify the
kernel's init process as the bash shell. (Note: init=/bin/bash can be
specified as a kernel argurment.) Once booted in that environment you'll
be able to see what a minimal system looks like. This shows what the
kernel looks like without runlevels which are managed by the standard
"init" in combination with the startup scripts. You'll see a lot is missing.

More Info
There are two "schools" of startup scripts: SYSV and BSD-style. For me, it
is easier to understand and decipher the BSD-style scripts provided by the
Slackware distribution. IME, before changing the SYSV startup scripts,
you'll need to get a "secret decoder ring"- they're too complex. So,
before jumping right in and rewriting the scripts yourself, study both
styles. Perhaps, the other "school" will be more to your liking. In
any case, the concept of an "init" process and "runlevels" are fundamental
to a unix-like OS. If you stray too far, you might end up with something
else.

--
Douglas Mayne

How do I get my project summary bar back after deleting it in erro Microsoft Project

How do I get my project summary bar back after deleting it in erro Microsoft Project

How do I get my project summary bar back after deleting it in erro

Posted: 22 Jul 2005 12:57 PM PDT


Hi Lois,

Welcome to this Microsoft Project newsgroup :)

Try Tools/Options.../View tab and at the bottom, tick the box for Show
Project Summary.

FAQs, companion products and other useful Project information can be seen at
this web address: http://www.mvps.org/project/

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP

Lois07 wrote: 

Why is BCWP zero?

Posted: 22 Jul 2005 12:17 PM PDT

JackD wrote:
 

This would be a great utility for those that need to correct the rate for
resources.

--
Brian K - Project MVP
http://www.projectified.com
--
Senior Trainer - Electronic Arts
--
QuantumPM Associate
http://www.quantumpm.com

vba datedifference type mismatch?

Posted: 22 Jul 2005 10:46 AM PDT

Hey

Jack, you seems to be the expert.

yeah i noticed that i missed the parantece. but its not that.

Sorry if ive explained the problem a little bit diffuse.
but its not a problem to get a object to a string. but the problem is to get
"activity.calendar" to be an object.

but it is possible to write Activity.Calendar in VBA?

if i dont get this to work , it is possible to send you a sample project
file. so that you can try it? just see if its just my computer or
something....

Thanks

- Bjorn








"JackD" <momokuri@gmail> skrev i melding
news:%phx.gbl... 

Removing tasks from a timesheet

Posted: 22 Jul 2005 07:52 AM PDT

Joe --

What you say is absolutely true. There is no default method in Project
Server to delete completed tasks for an individual project only. Thanks for
clarifying that for everyone! :)

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We wrote the book on Project Server"


"Joe" <microsoft.com> wrote in message
news:com... 

filter blank lines in gantt chart

Posted: 22 Jul 2005 07:48 AM PDT



"Brian K - Project MVP" wrote: 

Thanks for that Brian, I can stop searching then. Will give your tip a try
and as it's the only solution it will have to do.

Viewer for Project?

Posted: 22 Jul 2005 07:47 AM PDT


You're welcome, Bill :-)

Mike Glen
MS Project MVP


Bill Starbuck wrote: 

Material Resource overload

Posted: 21 Jul 2005 02:21 PM PDT

How could you set a max even if Project allowed it? Material resources are
things that are incorporated into the deliverable or consumed during its
production. If I have a wall that will require 500 bricks I can't just
arbitrarily stop building when I've used 250. If I did the wall won't ever
be finished and the project will be deemed a failure. Project's tracking of
material resources is to insure you know how many to order so you will have
enough on hand to do the job required. Essentially you can't load based on
materials - if the budgeted allowance isn't sufficient to complete the
required deliverables you only have three options - buy more materials,
reduce the project scope, or abandon it altogether.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Hadi" <microsoft.com> wrote in message
news:com... 

Slip task

Posted: 21 Jul 2005 11:17 AM PDT

Reading your post a question came to mind - was any work performed on the
11th? The task was originally scheduled to start on the 11th. If work was
NOT performed on it, we don't have a task being interrupted, we have a
task's start being delayed which is not the same thing at all. A task is
interrupted if work starts and then stands-down for some reason. If work
was performed on the 11th, the day of work for the 11th is "used up" in the
overall task duration and the interruption begins with the first moment work
should have happened but didn't, which is to say, the morning of the 12th,
NOT the moment the work that was performed finished, the afternoon of the
11th. If we work 8-5, work was done the 11th from 8 to 5 and the
interruption begins 8am the morning of the 12th, not 5pm the afternoon of
the 11th because non-working time, the hours from 5pm->8am, is ignored by
the calendars and might as well not even exist as far as the project is
concerned. The easiest way to post this to your schedule would be to enter
any actual work for that task on the day(s) it took place and then with that
task selected, use from the menu Tools / Tracking / UpdateProject and with
the radio button for "Selected Tasks" in the dialog box selected, use the
"Reschedule Uncompleted Work to Begin After..." option.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Sandieve" <microsoft.com> wrote in message
news:com... 

How to change pjDate_Www_dd ?

Posted: 21 Jul 2005 10:16 AM PDT

Well, it sounds strange, but the first date will be Dec 27'04, for 2005
calendar. This is, thas last week of Dec will be w1/1 ->w1/7. Part of the
problem could be that the last week of Dec is in MP, as of today, w53, and a
lot of companies only use 52 weeks for a calendar year. One of those
companies that use this format, that I know , is Intel

"Rod Gill" wrote:
 

How can I get the Adobe PDF Maker 7.0 toolbar into MS Project 03?

Posted: 21 Jul 2005 08:27 AM PDT

The PDF Maker toolbar for Project is a feature of Acrobat Professional only
and not available with Acrobat Standard.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"ClairNeedsHelp" <microsoft.com> wrote in message
news:com... 

Can I network 2 computers 1 with ME and one with XP?

Posted: 21 Jul 2005 08:06 AM PDT

In article <com>,
"ssmalley" <microsoft.com> wrote:
 

ssmalley,
This is a Microsoft Project newsgroup. I suggest you try a newsgroup
that deals with various operating system configurations.

John
Project MVP

Automatic Gannt Bar formatted based on the resource assigned?

Posted: 21 Jul 2005 07:01 AM PDT


Hi Tom,

Welcome to this Microsoft Project newsgroup :-)

You might like to see FAQ Item: 31. Customizing Task Bars.

FAQs, companion products and other useful Project information can be seen at
this web address: http://www.mvps.org/project/

Hope this helps - please let us know how you get on :-)

Mike Glen
Project MVP

tom s wrote: 

Resourcing will not feed through to pool

Posted: 21 Jul 2005 02:08 AM PDT



Rod Gill wrote: 

Rod, where were you when I needed you? Last year, I asked here if
anyone had experience with RP's going unstable, didn't get much in the
way of useful replies. You must have been on vacation! :)
Seriously, that's some good information. Thanks.

connect failed to project server from project profession

Posted: 20 Jul 2005 11:58 PM PDT


You're welcome, Randy :-)

I don't know how you got to this site, but you managed to post a quation
here. You get to the microsoft.public.project.server in exactly the same
way. I use Outlook Express for my newsreader, and it's just a matter of
adding the site to the account.

Mike Glen
MS Project MVP


Randy wrote: 

Create Project by Person

Posted: 20 Jul 2005 11:36 AM PDT

What will you do when two or more people are working together on a task?
The method you're thinking about is going to have multiple entries for the
same task, distorting the timeline of your work.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"microsoft.com" <please.reply@group> wrote in message
news:phx.gbl... 

Sending info to client without including cost data

Posted: 20 Jul 2005 11:20 AM PDT

Cindy wrote:
 

I would do a File Save As and make a copy of the current state of your
Project. I would then change the rates for everyone to $0 or $1 and then
do a Tools | Tracking | Clear Baseline and clear the baselines you might
have saved while the rate was higher. Then manually remove any values from
Fixed Cost fields.

--
Brian K - Project MVP
http://www.projectified.com
--
Senior Trainer - Electronic Arts
--
QuantumPM Associate
http://www.quantumpm.com

MSProject crashes when monitor display settings change.

Posted: 20 Jul 2005 09:23 AM PDT

I found a previous posting on 4/20/05 that answers this question... at least
I think.
"Crash Loop with PowerPoint and Projector" 4/20/2005

"DEslinger" wrote:
 

HOW TO SAVE A IMAGE OF MS PROJECT AS SCREENSAVER

Posted: 20 Jul 2005 08:29 AM PDT

If you mean MS Project you can use Edit, Copy Picture, to make a .gif file.

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"sumit" <microsoft.com> schreef in bericht
news:com... 
the 

MSP2003 - linking tasks using % complete to drive start date

Posted: 20 Jul 2005 08:07 AM PDT

Following other's suggestions, I prefer to show such situations as FS-25%.
Buty there's a consideration to keep in mind regardless of how you do it. A
link is a permissive control. It does not exist to force the schedule to
fit a particular timetable. When you have a predecessor linked FS to a
successor, it says that there is some physical reason that the predecessor
must complete before the precessor is even ABLE to start. Maybe the
predecessor produces some parts that the successor requires, for example.
Lead times like we're talking about modify that relationship slightly saying
that you can go ahead and start the successor when the predecessor has
produced enough parts to proceed even if it hasn't finished all of them that
it's going to produce. So when you enter the lead times as we've suggested,
make very very sure that it's physically possible for it to happen that way
and you're not just using the technique to force the schedule into what
you'd like it to be without regard to whether it's realistic to do it that
way or not.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"hostrows" <microsoft.com> wrote in message
news:com... 

Why doesn't my Office 2000 Professional have PROJECT on it?

Posted: 20 Jul 2005 07:51 AM PDT

Project is sold separately from Office Pro.
Visio is the same way.
They are in the office "family" but they aren't part of the "Office"
product.
If they weren't then microsoft would probably charge a fortune for Office.

--
-Jack ... For Microsoft Project information and macro examples visit
http://masamiki.com/project
or http://zo-d.com/blog/index.html
..
"Kate" <microsoft.com> wrote in message
news:com... 

Displaying Quarters

Posted: 20 Jul 2005 07:45 AM PDT

Philg wrote:
 

There is no such thing as Q0. There is Q1 and before that there is Q-1.
The project starts at a single point in time (by default on 8am on the day
you specify as the Project Start Date) The 'clock' for quarters, weeks,
etc starts there. This is the same idea that said that the millenium ended
on December 31st 1999 when really it ended at the end of 2000 since there
was no year 0. :-|

--
Brian K - Project MVP
http://www.projectified.com
--
Senior Trainer - Electronic Arts
--
QuantumPM Associate
http://www.quantumpm.com

MS Project gives gbui://blank.htm error. Registry patch not work

Posted: 20 Jul 2005 06:48 AM PDT

Jim:

See the following FAQ:
http://www.projectserverexperts.com/Shared%20Documents/gbuierror.htm

--


Gary L. Chefetz, MVP
"We wrote the books on Project Server"
http://www.msprojectexperts.com

For Project Server FAQs visit
http://www.projectserverexperts.com

For Project FAQs visit
http://www.mvps.org/project


"Jim Aksel" <microsoft.com> wrote in message
news:com... 

$1 cost rate

Posted: 20 Jul 2005 05:37 AM PDT

In article <com>,
Jan M. <microsoft.com> wrote:
 

Jan,
You're welcome.
John

I'm losing bar format colours when using Gantt Chart Wizard

Posted: 20 Jul 2005 03:50 AM PDT

Hi,

On your first question, the answer is yes. The reason lies in the answer to
your second question.
A view holds ALL the formatting items, generic (i.e. via Bar Styles) or
individual.

hth

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"jkn" <f9.co.uk> schreef in bericht
news:googlegroups.com... 
this a 
Bar'. 
Gantt 

Microsoft CRM - CRM mobile invalid ssl certificate

Microsoft CRM - CRM mobile invalid ssl certificate

CRM mobile invalid ssl certificate

Posted: 23 Feb 2005 12:25 PM PST

yes I am using the same device when I use the tool and trying to connect. I
used the buttons on the left hand side then I used the right hand side and
everything showed as expected, but when I launch the Mobile CRM from
"Programs", it says invalid SSL certificate.

"Dean Wierman" wrote:
 

Create activities for multiple leads

Posted: 23 Feb 2005 09:14 AM PST

That works perfectly. Thanks for the help!
-sl

"Scott Sewell" <com> wrote in message
news:phx.gbl... 

Access denied error in web and deployment manager, hangs listing u

Posted: 22 Feb 2005 03:19 PM PST

hi John,

yes, it was started.

But it's now solved: it turned out that the machine I've been using was in a
child domain of the domain I was an admin, and where I was installing CRM -
and I didn't know that, this machine being a dev server, it has been
previously hacked by another person to make some AD testing, and it hasn't
been reverted the way I was told.
I had the possibility to move that machine back to the root domain, so I've
done it and it cleared all problems, everything's ok now. Thanks for your
help!

Arnaud

"John O'Donnell" wrote:
 

Migration to New Active Directory forest

Posted: 22 Feb 2005 02:31 PM PST

I have personally not used the tool yet but know many have. In fact
microsoft support uses it to ship installations to their engineers to work
on etc.

like all things just read the manual...then read it agin just to be sure :-)

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"DJ" <microsoft.com> wrote in message
news:com... 
CRM 
on 
you 
http://www.microsoft.com/downloads/details.aspx?FamilyID=bfced393-61db-49af-9a50-4a90b311fa7d&DisplayLang=en 
move 

Activity Owner Auto-Change?

Posted: 22 Feb 2005 02:11 PM PST

In the db, we have seen the modified time change 5 seconds after the object
was created and it show the the "real" owner as the one who modified it. But
no other hints.


"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 

How to use Quote template mail merge

Posted: 22 Feb 2005 01:45 PM PST

HI!

No! There is no posibility to select more than one quote!


Christian

com
www.mscrm-addons.com
Your company for MS-CRM ADD-ONS!
GroupCalendar for MSCRM
Related Documents for MSCRM
WordMailMerge for MSCRM

"aba" <microsoft.com> schrieb im Newsbeitrag
news:com... 

Reporting on Custom Fields without Crystal Enterprise

Posted: 22 Feb 2005 09:51 AM PST

you need exactly 9.2.2

as you have a 9 license you can now get 9.2.2 by contacting businessobjects
and asking for it. They will validate your crystal 9 license then either
send you 9.2.2 or give you a download location

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"godzilla" <microsoft.com> wrote in message
news:com... 
is 
9.2.2. 
logon 
go 
fields 
log 
the 
verifying 
Crystal 

No reports available...

Posted: 22 Feb 2005 09:31 AM PST

Well, I just answered my own question.

I found out that Crystal was throwing the "check to ensure you have enough
licenses" error in the Event Log. Did some research here on the groups and
found that simply restarting the Crystal services fixed the problem.

Done - thanks for the help.

-sl

"Scott Leonard" <com> wrote in message
news:%phx.gbl... 

How to reassign multiple leads

Posted: 22 Feb 2005 08:28 AM PST

Wow - I can't believe I missed that.

Thanks a ton for the help.
-Scott

<rr.com> wrote in message
news:12ae01c5191b$4f9da4f0$gbl... 

Problem With Contacts Import

Posted: 21 Feb 2005 03:29 PM PST

Yes, but if I manually have to enter the business name into the Address 1
Field, that totally defeats the purpose of the import wizard automating the
process.

There needs to be a way to import all Contacts from Outlook including the
Company Name. It would be great if the import wizard would create a new
account for every company name that was imported during the import wizard.
There also needs to be a way to select which contacts you want to import from
Outlook rather than all Contacts. Looks like Microsoft has a long way to
go...

"John O'Donnell" wrote:
 

Chrystal reports and using custom fields as a filter

Posted: 21 Feb 2005 08:45 AM PST

and have you added fields to these reports?

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"Basman" <microsoft.com> wrote in message
news:com... 
fields as 
report 
http://www.microsoft.com/BusinessSolutions/Community/CRMFaqLanding.aspx 
message 
in 
Microsoft 

SFO sync.

Posted: 21 Feb 2005 03:39 AM PST

> 

I am aware of that, the question is if when they get sync errors all the
data not listed in the errorlist is applied to the CRM server.
And they get errors if they can't find activities or other things that have
changed on the CRM server since the last time they went online from offline
state.

Jack
Subscribe to: Posts (Atom)