Pages

Search

Microsoft Word - Can't run Office 2013 on Windows 8

Microsoft Word - Can't run Office 2013 on Windows 8

Can't run Office 2013 on Windows 8

Posted: 28 Sep 2014 02:53 PM PDT

Split from this thread.

I am having this problem with Windows 8 - I have installed Office 2013 at least 5 times and it still will not run.  Since there is no "start" option on my startup menu, what do you suggest?

Unable to open Microsoft Office 2010 Home & Student

Posted: 28 Sep 2014 12:35 PM PDT

I am unable to open the Word and Excel program or any files. Whenever I click to open the programs I get a message "Unable to open" and the suggestion to use Control Panel to repair the files, which I have done. The Control Panel said that files were successfully repaired but I still get the message and cannot open the files or programs.

Please would someone help.

Document content missing

Posted: 28 Sep 2014 11:39 AM PDT

Split from this thread.


On 4 or 5 occasions, including this morning.  I had saved a document, plus it was automatically saving.  When I got ready to upload the document it said it was in a docm form, so the I could not load the document.  I did save as word for word 2013, when I opened it again all of my work, except the title page and one reference on the reference page had disappeared.  I had this problem when I first installed office 2013, so in the past I had been very cautious and didn't save on my portable drive.  I have looked everywhere but nothing shows up in any locations and it doesn't even have the option to restore the previous version. 

Problem with Microsoft Word Documents

Posted: 28 Sep 2014 11:21 AM PDT

Why do I have these different icons instaed of the Microsoft Word icon.

Please Help!!

Can "Ignore All" be made persistent?

Posted: 28 Sep 2014 11:14 AM PDT

This is for Word 2010, but I've had the same yearning for all versions of Word before that, ever since I switched from WordPerfect.

I often work on documents that use unusual words, or made-up words. When I spell-check, they are always identified as spelling errors.

I do not want to add them to my dictionary, because in another document I might very well want the spell checker to identify them as spelling errors.

I do not want to create a custom dictionary, because I would be creating a different one for every document I work on (very cumbersome).

If I use "Ignore All" I can get Word to ignore the word wherever it appears in the document, but I have to do that again each time I re-open the document. Very cumbersome if I have 50 such words in each document and have to re-Ignore-All all of them each time I open the document.

As a result of this, the spell checker has become pretty much useless to me since the squiggly red line below a word has lost its meaning.

WordPerfect used to have an Ignore-All type feature, which would persist between sessions. I think it was called a Document Dictionary. It was specific to the particular document. Is there any way to get the same effect in Word, perhaps with a macro or VBA?

I am not a macro or VBA programmer, so though I've tried to program this, I haven't gotten very far. Initially I thought there might be a VBA function to create variables that would stick with the document and would persist across sessions, and that I could implement a "document dictionary" using such variables. Then one macro would first do an "Ignore All" for the selected word, and then add a selected word to the document dictionary. A second macro, which would execute on open, would automatically do an "Ignore All" for every word in the document dictionary.

Another thought I had was to use the Language -> Do not spellcheck this word feature. One macro would search for a selected word throughout the document and "do not spellcheck" it wherever it appeared. That would persist across sessions, but I'd have to re-run the macro if I add the word somewhere else in the document.

Has anyone created a macro or set of macros that can implement a persistent, document-specific "Ignore-All" feature?

Thank you

Word 2007 window open unexpectedly

Posted: 28 Sep 2014 10:17 AM PDT

I realise when I open a Word 2007 document from "Recent Item" option or from a folder, the last minimised Word 2007 document opens up. When I open a Word 2007 file, it maximises the last minimised Word file as well.

I realise, it opens the Word 2007 document I selected, and the last Word 2007 document I opened (minimised) also maximises. I do not want that. It is not about opening more than one tab, but Word 2007 document maximising unexpectedly. Is there some option to get rid of this feature?

Use a Macro to "Edit Recipient List" in Word 2010

Posted: 28 Sep 2014 09:08 AM PDT

I have an Excel database with the following fields:  Volunteer Name; Days of the week (Mon to Sat); & Skills Required.

Under days of the week it is either the early or late shift the work.  For each skill column, it is either Yes or No.

I have a Word mail merge document that creates a table with the volunteers and the skills they possess.  To create a report for each shift on each day, I edit the recipient list.

I tried to record a macro that would capture the actions in the Edit Recipient List, but it does show any steps.

By hand, I select All for each day of the week and then select the single shift I want, i.e.  Monday Early.

Is there a way to edit the recipient list using a macro?

MICROSOFT OFFICE, WORD 2013. question; how can I set up the document default dictionary fora Word2013 document to be Wikipedia?

Posted: 28 Sep 2014 07:48 AM PDT

OFFICE WORD 2013- My question is; how can I set up the dictionary default in a Word2013 document to be Wikipedia?

 -when I search for definition's, my Word2013 default is set up to open Merriam Webster, and me no like?

Thanks:!

Fed up with constant reinstallations

Posted: 28 Sep 2014 07:31 AM PDT

Why do I have to re-install Office code every time I use it? I've signed in about 6 times since I bought Office Home & Student 2013

AutoCorrect entries are missing

Posted: 28 Sep 2014 07:12 AM PDT

Split from this thread.


I have had a bummer of a thing occur. I'm in the middle of writing a time-crunched and very big report. I spent a couple of hours last week making some fantastic new autocorrect entries (Word 2010) but within a few days they had all disappeared. I've looked through these and other forums and I've tried a few things, but honestly I don't know about making macros or normal templates and I've even struggled to find the *acl entries, so I am prepared to wear the loss and start again.

BUT I want to get it right from the very beginning. Could you please outline steps I can take to ensure my autocorrect entries never disappear again or, if they do, which for whatever bizarre reason seems to happen a lot, that I can easily go to some backup file (which I'd commit to updating each time I make a bunch of new autocorrect entries) and wave a wand and restore it.

I'd be so grateful for your help.

Many thanks

Jane

In printing out an an envelope (using the Custom Envelope size), does not print out an address

Posted: 28 Sep 2014 07:11 AM PDT

In Word there is an option, to allow the user to set a Custom Size for an envelope.

1)  In Word 2013, I set the Custom Size for an envelope, added the From/To Address and printed out the envelope on my Epsom LP1022 - unfortunately, the envelope came out blank.

2)  I did exactly the same in Word 2010, but the envelope was printed out, with text on it.

I did (1) & (2) a few times, but the results were the same - so does this mean that there is a bug with Word 2013?

No Compatibility option at File | Info

Posted: 28 Sep 2014 06:50 AM PDT

Split from this thread.

The installation of Office 2013 that I am looking at does not have a compatibility button on the Info page as described. Even when I do a save as to an older document as the new format I cannot edit the opened file despite it showing no restrictions. What gives?

less space in numbering

Posted: 28 Sep 2014 06:49 AM PDT

I have a table and in the left column are the numbered section names for the document.  The space Word automatically inserts between the number and the section name is way too wide.  How do I reduce the space down to like one space?  Now, it's like five or six spaces.

My Microsoft office 2013 has disappeared !

Posted: 28 Sep 2014 05:18 AM PDT

Hi all, I've been using an Asus notebook for about a month now and have just tried to access my word documents but I can't get into them. Also when I click on any of the office programmes none of them come up.

Extra (useless) headings appearing due to summary addition

Posted: 28 Sep 2014 02:12 AM PDT

Hello, there!

When I add the summary to the one of my documents, the navigation pannel displays extra headings that shouldn't be there (marked in red in the first figure). I don't know why this is occurring and would like to change it by eliminating them. This is important to me because this document needs to be converted to PDF with the correct headings (without the highlighted part). The second figure shows how the PDF is now.

Thanks!

opening arabic word 2013 collates the words together

Posted: 28 Sep 2014 01:20 AM PDT

hi, can any one help, pleaaase. if i open an arabic text from word 2013 in earlier version of word, many spaces between word just ...  disappear... 

Numbering Format not working

Posted: 28 Sep 2014 01:20 AM PDT

The numbering format in Office 365 isn't working properly. I never change the setting before and I can't seem to reset it either. The numbering seems to disappeared and replace with small bullets.

Microsoft word has stopped working?

Posted: 27 Sep 2014 06:20 PM PDT

Microsoft 2013 was running just fine but all of a sudden an error started coming up nonstop but not when I start it, when I am in the middle of typing, the error  says "Microsoft has stopped working" then " Microsoft word is restarting" and then it closes.

Is there any way to fix this error I have tried looking at different posts with no luck

                                                                      

                                                                                                                                                                     Thank you

I need help.. what is code error 0X40

Posted: 27 Sep 2014 06:11 PM PDT

Hi I just purchased Microsoft and its not allowing me to activate because of a code error OX40.. help please. Thank you.

Delete a folder.

Posted: 27 Sep 2014 04:27 PM PDT

I am currently using Microsoft Word 2010 and have the following problem.

In my document library I have a folder showing that I do not know how to get rid of. After I have completed a backup I always get a message telling me to check my backup results and come across the following message:-

Backup encountered a problem while backing up file C:\Users\ALAN\Documents\Alan Documents\Alan Cooper. Error:(The system cannot find the file specified. (0x80070002))

It also shows as this if I go to my documents.

Is there any way I can delete this from my pc ?

Microsoft CRM - Check out THIS undocumented feature......

Microsoft CRM - Check out THIS undocumented feature......

Check out THIS undocumented feature......

Posted: 05 May 2005 03:42 PM PDT

Sorry John,

Just to be clear, I am creating the e-mail via sdk, but sending it manually.

Regards,
Keener

"John O'Donnell" wrote:
 

Using Service - Setting up autoreply with case number

Posted: 05 May 2005 01:21 PM PDT

You can get this functionality right now from c360's excellent EmailToCase
add-in

It does exactly what you want plus more - see www.c360.com

You can download a trial - 15 days I think

Peter Lynch



"Larry" <microsoft.com> wrote in message
news:com... 

Re-using MS CRM vanila fields

Posted: 05 May 2005 01:10 PM PDT

John,
Thank you.
So just to confirm
If you have 2 options:
a. Create a new custom fields.
or
b. Reuse CRM fields for our purpose.

Which would you pick?

"John O'Donnell" wrote:
 

How to create new Business Unit (root) Parent?

Posted: 05 May 2005 11:28 AM PDT

I tried it and it worked. Let me know if there is a better way to do
this and if this is safe to do.

Thanks!

Phin

Failover statergy

Posted: 05 May 2005 08:30 AM PDT

For this situation I always recomend a SQL failover Cluster


"Dodd" <microsoft.com> wrote in message
news:com... 

Deleted User, Lost License

Posted: 05 May 2005 06:22 AM PDT

Thanks very much Dan. That did it!

"Dan Quinton" wrote:
 

Disappearing Browser when running MSCRM

Posted: 05 May 2005 06:20 AM PDT

Check out the Popup Blockers. The CRM web site needs to be on the
trusted sites list.

IE now has a built in popup blocker in SP2.

That is the symptom fo this problem.

Pierre Hulsebus
ehtc.com

Crystal Logon Error

Posted: 05 May 2005 04:14 AM PDT

You should also verfiy that your settings are as described in this section of
the FAQ:
"Identifying and fixing security problems that are preventing reports
from running"

In our experience, some of these settings are always incorrect.
If this does not solve your problem, then obtain some non-public hot-fixes
for MSCRM from MS Support, which is why you need to register a support
request.

KjellSJ
http://kjellsj.blogspot.com


"com" wrote:
 

Mass update to allow emails?

Posted: 04 May 2005 05:27 PM PDT

Interesting alternative Dodd - painful, but it's good to have options.
Thanks to both of you!


"Dodd" wrote:
 

Lead vs Non-Lead sales process

Posted: 04 May 2005 01:38 PM PDT

No sweat. :-)

"Nahi" wrote:
 

Checkbox Group

Posted: 04 May 2005 01:14 PM PDT

Thanks Dave. I don't understand your comment on the check many picklists.
Can you clarify?


"Dave Carr (dave- no com" <com> wrote in message
news:googlegroups.com... 

Crystal Memory Leak?

Posted: 04 May 2005 01:00 PM PDT

Thanks Dan, I have not charted the memory usage but that’s a good idea. I’ll
have to check around to find out how to follow your suggestions. If you are
willing, could you send me an email with some details? dean_headley AT hot
mail Dot com Thanks

"Dan Quinton" wrote:
 

E-mail templates used in a sales process

Posted: 04 May 2005 10:30 AM PDT

Hi,

Thanks for the quick response. I appreciate it. I should have mentioned in
the background that I gave that I did make it an Opportunity Template type.
I'm also not creating a workflow rule. I'm trying to add an action to a
stage of a sales process. I may be just being too specific, but I wanted to
say that in case it makes a difference. Any other suggestions? I've found
that there isn't a ton of helpful documentation about this, so anything
would be helpful.

Thanks,
--John
Remember, the early bird gets the worm,
but the second mouse gets the cheese.
"Dodd" <microsoft.com> wrote in message
news:com... 

SSL for CRM

Posted: 04 May 2005 09:20 AM PDT

install cert at CRM server. That enables the https (443)

Hope you're not thinking of putting the CRM server on the internet.
I've tried to using port forwarding so that CRM server is not exposed.

I was having a lot of issues, so I gave up on this idea.

CRM Securities.........

Posted: 04 May 2005 08:55 AM PDT

Thanks,

I have one Business Unit only. All users are under this business Unit.

I created a new role and assigned the full permissions to Core Records.
Now data is visible to CEO Business Role users for Accounts..........
If any other Role or my New Role user goes to Accounts......they can see no
Accounts but they are able to see
all other data like Contact, Activities and Notes..................

I created Accounts in CRM using DTS services.

Regards,

Moonis

"Dave Carr (dave- no com" <com> wrote in message
news:googlegroups.com... 

Account Creation

Posted: 04 May 2005 07:47 AM PDT

only suggestion would be to create a custom form that the users will use to
create only sub accounts. The problem even with this though is they still
need the create account security right. No easy way to get around this one.

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"Chris" <microsoft.com> wrote in message
news:%phx.gbl... 

Deleting Quotes

Posted: 04 May 2005 02:00 AM PDT

You need to change the Statecode number so as to change the quote back
to active. You can then delete it. Do this in the MSCRM QuoteBase
table.


Ian Kelsall wrote: 
"Won" 
remove 
only - I 

Can not change field

Posted: 04 May 2005 12:50 AM PDT

For example the field "Price per Unit" in Opportunityproduct.

"John O'Donnell" wrote:
 
Subscribe to: Posts (Atom)