Pages

Search

Microsoft Word - Word 2007 keeps reinstalling itself every time I open it

Microsoft Word - Word 2007 keeps reinstalling itself every time I open it

Word 2007 keeps reinstalling itself every time I open it

Posted: 04 Mar 2013 11:46 AM PST

On my desktop computer every time I double-click a .doc or .docx file Word 2007 has to first reinstall itself.

I'm sure it has something to do with the fact that I have Word 2003, Word 2007, and Word 2010 all installed on my computer. Before you tell me to uninstall the other versions, let me explain.  My clients typically use only one of those versions (though few use Word 2003 these days).  When I design templates and demo them, I have to open the file in whichever version they use.  Plus I have to test templates and files in the client's version and have to write proper instructions for their version.

In the past this was not much of a problem. Double-clicking a Word file would open the last version that I used.  If I needed to open it in a different version, I would first open that version of Word and it would take a few moments to configure.  After than, whenever I clicked a Word file, it would open in that version.

That still is the case for Word 2003 and 2010, but recently Word 2007 reinstalls itself every time.  Even if Word 2007 was the last version used, Word goes through the installation and configuration process again.  This doesn't matter if I open it by double-clicking a file or opening Word 2007 first from the Start menu.

My desktop is running Windows 7 Home Premium 64-bit.  My laptop is also Windows 7 Home Premium 64-bit with the same three versions of Word. Yet I don't have this issue with the laptop.

This behavior started several weeks ago after some Office updates.  However I've made those same updates to my laptop without any problem.

Any suggestions?

MS Word 2007 documents - Does word automatically save .doc or just other formats

Posted: 04 Mar 2013 08:11 AM PST

I am wondering with MS Word 2007, does the the document get backed up if it not .doc. I have noticed that every document that I have not saved as a .doc property does not have a .wbk behind it.

Do you have to temporarily save the document before Word will recognise it?

What steps can you take to try and retrieve a document - are there temp files made?

I am so sorry, I am only new to computers and it continually keeps crashing and repairing the documents.

Thank you

create custom field for YYYY

Posted: 28 Feb 2013 12:29 PM PST

I need to create a field for YYYY that will update automatically.  I am using XP sp3 32 bit5 with Office 2010 version 14.0.6129.5000, but I have access to Win 7 32 bit with Office 2010 same version.

 

I have enabled the Developer tools and have tried various things.  Can someone please point me in the right direction?

 

Thanks,

Kim

Word 2007 macro current keys NOT displaying

Posted: 28 Feb 2013 07:11 AM PST

Unfortunately, working on redoing large number of associated documents, I have forgotten what some of the keyboard shortcuts I've recorded belong with which macros. I found this advice in more than one MVP posting:

"In Word 2007, click
Office button > Word Options > Customize > Keyboard shortcuts Customize.

In either case, set the category to Macros (near the bottom of the list), then
click the name of your macro in the right-hand list. The Current Keys box will
show what shortcut is assigned to it."

The Current Keys box is NOT displaying anything on any macro for me.

I would really love to see these! Can anyone help me out?

Sharon C.

Open Office - [discuss] A thought

Open Office - [discuss] A thought

[discuss] A thought

Posted: 10 Nov 2006 08:26 PM PST

On Fri November 10 2006 14:02, + David@Comp-Net wrote: 

Of course not - we are happy to have others help us promote this great
project.

Please reply to org only.

Normally org is the best list to ask questions about using
OpenOffice.org

--
CPH : OpenOffice.org contributor

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] OpenOffice set Qualifications

Posted: 10 Nov 2006 08:26 PM PST

On Sat, 2006-11-11 at 08:19 +0100, M. Fioretti wrote: 

The difference between INGOTs and ECDL/ICDL is that INGOTs are more
concerned with learning related to transferable ICT skills,
understanding open systems and participating in open source communities.
ECDL/ICDL is much more about testing specific skills related to specific
applications. At the Learning Machine Ltd we are primarily interested in
education that underpins readiness for change and we are less concerned
about qualifications that are specific to a single application. Our view
is that people properly educated in ICT can transfer their skills across
applications without specific training and that this is a much more
sensible approach in the 21st Century given the rate of technological
change.

We are about to undertake a trial in collaboration with the Shuttleworth
Foundation in South Africa where ICDL is used and it could be that there
are complementary aspects to each approach. Certainly when it comes to
take up by entire schools and colleges, the INGOT way of doing things is
a lot less expensive which will be critical for mass adoption in cash
strapped economies that are adopting OOo for economic reasons.

Ian
--
www.theINGOTS.org
www.schoolforge.org.uk
www.opendocumentfellowship.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] request additional input/output format for spread sheets

Posted: 09 Nov 2006 02:55 PM PST

Hi Neil,

On Thursday, 2006-11-09 15:44:57 -0500, Neil Drake wrote:
 

In the file open / save dialog, after having selected your file, just
select the file type "Text CSV", where in the following dialog you can
also select tab instead of comma (or anything else) as a separator.

Eike

P.S.: As you're not subscribed to the mailing list you were posting to,
you will miss replies that are directed to the list only. When answering,
please reply only to the list (Reply-To header is set), not to my
personal account. Thanks.

--
OOo/SO Calc core developer. Number formatter stricken i18n transpositionizer.
OpenOffice.org Engineering at Sun: http://blogs.sun.com/GullFOSS
Please don't send personal mail to the com account, which I use for
mailing lists only and don't read from outside Sun. Thanks.

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Site Open Office

Posted: 07 Nov 2006 09:36 AM PST

--=-bT7zqMkmuuCJpC17TwDy
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi,
 

I hope you meant pull-down rather than pop-up? Pop-up sounds like an
additional window to me - or some other intrusive way of
JavaScriptOFancyNess. ;-)
 
..

Very true.
 

If all native language projects have domains in the pattern of
XX.openoffice.org with XX being the usual language abbreviation, than it
should in theory be possible to even have a little script probing for
the existence and compile a list fully automatically.

Andr=E9.


--=-bT7zqMkmuuCJpC17TwDy
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)

iD8DBQBFU6soEOp8fsnyxsQRArWtAKDInIz8Az9ij87yQvPbkL TM67xLQwCg04wc
0qO+aIaaqofB92cE5ccxZCw=
=uwbb
-----END PGP SIGNATURE-----

--=-bT7zqMkmuuCJpC17TwDy--

[discuss] software need

Posted: 06 Nov 2006 12:41 PM PST

------=_Part_13030_21543615.1162923667217
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

While OO has applications that work for publishing applications, they do not
work as well as MP. So your best bet would try a piece of software that is
called Scribus, this is a professional page layout program that is open
source and free.



I am hoping that OO will eventually make a page layout program in the
future:)



Hope this helps

------=_Part_13030_21543615.1162923667217--

[discuss] OpenOffice.org-2.0

Posted: 05 Nov 2006 09:03 AM PST

On Sun November 5 2006 14:30, + Darcy Larangeira wrote: 

What is your exact problem ?

Please reply to org only.

Normally org is the best list to ask questions about using
OpenOffice.org

--
CPH : OpenOffice.org contributor

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] This feature really piss me off.... No Office Suite

Posted: 05 Nov 2006 01:29 AM PST

On Wed, 2006-11-08 at 09:49 +0100, Mathias Bauer wrote: 

Thanks, i m heard :)

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] HELP! file recovery

Posted: 02 Nov 2006 10:12 PM PST

> The point is not to rely on any one format when encrypting.

But why would you rely on compression software for encryption in the
first place. If you are wanting to protect something, use a proper
encryption utility (eg, PGP).

The encryption in OOo is to prevent the XML files from being read
(since OOo files are all zipped together) and I agree that if I wanted
to encrypt something I wouldn't use OOo either - I would use a purpose
built encryption utility.

IMHO however I tend to place more trust in open source implementations
of anything than close sourced equivalents. But thats just me...

But as to the OP question, unfortunately I don't think there is much
that can be done to recover your document...

/paul

--
Try Torpark; a small portable, open-source, built on Firefox browser
that enables anonymous browsing. Requires no installation :
http://www.torrify.com/

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Writer - can objects leave the layout environment?

Posted: 02 Nov 2006 07:58 PM PST

On Fri, 10 Nov 2006 17:10:38 +0100
Mathias Bauer wrote:
 

Sounds like a job for draw. Without more on the precise tasks planned i
can't comment much further.

--=20
Michael
Those that can, do; those that can't, teach.

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Referendum on changing length of CC service

Posted: 01 Nov 2006 01:52 AM PST

+1

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] openoffice.org "outlook" version

Posted: 31 Oct 2006 09:10 AM PST

Lars wrote: 
There were reports recently that moves towards bundling were announced
at an OpenOffice conference.

This is one report:
http://www.techworld.com/applications/news/index.cfm?newsID=6944

--

If you're seeking, check out http://www.rci.org.au

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

Microsoft CRM - Adding Customized field to a CRM Contact form

Microsoft CRM - Adding Customized field to a CRM Contact form

Adding Customized field to a CRM Contact form

Posted: 02 Mar 2004 08:35 AM PST

It involves disabling replication, making manual metabase/table/schema mods,
and then re-enabling replication. We have a fairly involved process that
lets us do it without breaking CRM.

Unfortunately it's far too complex for us to recommend people trying
themselves. You need to have extensive experience with the MSCRM and
METABASE architectures to do it without breaking the web or outlook client.
If you send me an email, I can have our support services get in touch with
you regarding what would be involved, and what the associated costs would
be.

Mike

greaterthantwo media
Printable Quotes, Orders and Invoices, with line-item details, now available
for MSCRM.
http://www.greaterthantwo.com


<microsoft.com> wrote in message
news:594101c40079$f9a8d250$gbl... 

Sharepoint co-existence

Posted: 02 Mar 2004 03:36 AM PST

Thanks Michael,

This is not a scenario that the Microsft CRM support team have recommended for performance reasons, as well as the one that you have stated.

regards,

Andy.

Cannot add custom fields

Posted: 01 Mar 2004 11:15 PM PST

Hi Marina, have you published your new fields? They won't show up on the
MSCRM database tables until after you publish. CRM 1.2 has been released,
so you might want to think about switching off the beta.

Mike

greaterthantwo media
Printable Quotes, Orders and Invoices, with line-item details, now
availablefor MSCRM.
http://www.greaterthantwo.com


"Milanina Marina" <ru> wrote in message
news:u$phx.gbl... 

MS Partner - CRM License Key

Posted: 01 Mar 2004 05:02 PM PST

We had two sets - one from Partnersource and one from our
Action Pack - ta-da - right on the back of the Action Pack
one was our code.. I've been toting around the other
set...

Thanks Anders!

Sue
 
are 
in 
with 

multips errors when emailing from CRM 1.2

Posted: 01 Mar 2004 02:40 PM PST

This part is now fixed. I had some issues with the IUSR anonymous account
and now that is fixed.

Any ideas on the other problems?


Thanks
Greg



"Michael Schumacher (MS)" <microsoft.com> wrote in message
news:phx.gbl... 
occurred.</description><details>An 


<snip>

Too Slow to Sync records between ERP and MSCRM

Posted: 01 Mar 2004 12:34 PM PST

In addition to Mike's suggestions, I'd also say to reevaluate how much
data you're forcing to sync every night. It sounds like you're trying
to synch every record. Is there any way you can only send the record
that have changed? How about trying to use Biztalk to process the
synch psuedo-real time through out the day?

Matt


On Mon, 1 Mar 2004 12:44:04 -0800, "GreaterThanTwo Media"
<com> wrote:

Hi Jonathan, the SOAP proxy API is incredibly slow (especially on CRM
1.0).
You might want to look into using the unsupported COM proxy API. It's
much
faster, and the object interface is basically identical (but you don't
need
to specify credentials or url properties). It's quite easy to switch
code
between the two. The only consideration is that it's unsupported, and
may
be changed/dropped in a future version.

Also, what is your server setup? You may want to consider beefing up
your
SQL server box in order to get the throughput you need.

Mike

greaterthantwo media
Printable Quotes, Orders and Invoices, with line-item details, now
available
for MSCRM.
http://www.greaterthantwo.com


"Jonathan Jiang" <com> wrote in message
news:52f001c3ffcc$9e14f250$gbl... 

CRM SFO setup

Posted: 01 Mar 2004 12:09 PM PST

Well, in an offline scenario as you describe it, you might run into several
problems.

You use two different Windows profiles and hence two different Outlook
profiles:

- the Outlook Offline File (.ost) is bound to an Outlook Profile, you might
be able to bind it to your other account by at least synchronizing once
with your "offline" Windows account against your Exchange Server, but that
might lead quite unpleasant side effects.

- the offline features of CRM are bound to your Windows AND Outlook profile,
the permissions to the local SQL replica will be one point, attaching it to
the other Outlook profile another one.

To follow the previous poster, the best way is to use one profile, and
that's the way SFO is designed to work, one Windows and one Outlook
profile. You should be able to logon with your domain account whether
online or offline.

Hope thet helps.

CRM licenses order

Posted: 01 Mar 2004 10:59 AM PST

You can go to eopen.microsoft.com and login with a MS
Passport. From there, you can add agreeements to the
system and then get your codes.

If you'd prefer, you can contact our company and we can
assist you with that. We are a couple hours off the coast,
but the advantage is that we work long after you've gone
home to get you information before you wake up in the
morning.

I'm sorry you had such difficulty. When we place an order
for MS Licenses, we get a response from our distributor
within 24 hours. At which point we forward the e-mail to
you with your codes. Your reseller should have the same
repsonse time from their channel.

Aloha,

Michael James
Solutions Architect
GeminiTech, LLC
94-1057 Mele Street
Waipahu, HI 96797

808-843-1000 x103


 
system, and our 
process. The last thing 
Confirmationi", and 
that I would shortly 
CRM keys......... 
do any MS Partners 

MS Post Call-Out Sample

Posted: 01 Mar 2004 08:34 AM PST

Andre,

As Rob mentioned, make sure that you interface has the EXACT GUI from
the example. But you still register the GUID from your coponent in
the table.

Matt

On Tue, 2 Mar 2004 13:44:49 +0100, "Andre Grumbach"
<andre.grumbach@.itvt.nospam.de> wrote:

Hi Rob,
I also try it with this F4233E5B-17DC-4661-9ABC-6707A9F99215 GUID, but
it
have the same result and didn't work.
i tell you know my approach:
1.. I'm Programming (copy) the HowTo from this page
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmbscrm1_2/html/mbs_crmPostCalloutsv1d2.asp
(on my local Computer)
2.. I make a strong key for this project and add it to the
Assembly.cs
3.. I'm built the Code
4.. I copy the code to the VPC Server with the MSCRM (on this VPC
isn't
any kind of VS-Net installed, only the :Net Framework)
5.. I registry the release Dll to the Gac (like Gacutil -i path to
dll)
6.. I register with regsvcs path to dll
7.. I registry the Callout Object in the SQL Statement (I am using
the
GUID like I'm using for my CRM Calss)
After I do this, I try to check my Sample and create an Account in the
CRM.

But it didn't work, there is no text file.

So what did I wrong?

Here is my C# code and my SQL Statemant (again):

[C#]

using System;

using System.EnterpriseServices;

using System.Runtime.InteropServices;

using System.IO;





[assembly: ApplicationName("Callout Example")]

[assembly: ApplicationActivation(ActivationOption.Server)]

[assembly:
ApplicationAccessControl(false,AccessChecksLevel=A ccessChecksLevelOption.App
licationComponent)]



namespace CRMCallout.dll

{



[GuidAttribute("F4233E5B-17DC-4661-9ABC-6707A9F99215")]



public interface ICRMCallout

{

void PostCreate(int ObjectType, string ObjectId, string
OrigObjectXml);

void PostUpdate(int ObjectType, string ObjectId, string
OrigObjectXml);

void PostDelete(int ObjectType, string ObjectId);

}



[GuidAttribute("AA4AD2AC-97B8-4d24-8E81-388A655DDBE5")]

[ClassInterface(ClassInterfaceType.AutoDispatch)]



public class CRMCaller : ServicedComponent, ICRMCallout

{



public void PostCreate(int ObjectType, string ObjectId,
string
OrigObjectXml)

{

FileInfo fi = new
FileInfo(@"C:\CSCallout_Insert.txt");

StreamWriter s = fi.AppendText();

s.WriteLine("CRM Create Event Occurred...\n");

s.WriteLine("Object Type: " +
ObjectType.ToString());

s.WriteLine("Object ID: " + ObjectId.ToString());

s.WriteLine("Object XML String: ");

s.WriteLine(OrigObjectXml);

s.WriteLine();

s.Close();

}



public void PostUpdate(int ObjectType, string ObjectId,
string
OrigObjectXml)

{

FileInfo fi = new
FileInfo(@"C:\CSCallout_Update.txt");

StreamWriter s = fi.AppendText();

s.WriteLine("CRM Update Event Occurred...\n");

s.WriteLine("Object Type: " +
ObjectType.ToString());

s.WriteLine("Object ID: " + ObjectId.ToString());

s.WriteLine("Object XML String: ");

s.WriteLine(OrigObjectXml);

s.WriteLine();

s.Close();

}



public void PostDelete(int ObjectType, string ObjectId)

{

FileInfo fi = new
FileInfo(@"C:\CSCallout_Delete.txt");

StreamWriter s = fi.AppendText();

s.WriteLine("CRM Delete Event Occurred...\n");

s.WriteLine("Object Type: " +
ObjectType.ToString());

s.WriteLine("Object ID: " + ObjectId.ToString());

s.WriteLine();

s.Close();

}

}

}



[SQL]

declare @subscriberid uniqueidentifier

set @subscriberid = newid()



-- Insert Subscriber (Sample Module)

insert into Subscriber(SubscriberId, CLSIDorProgId, Name, Description)

values

(@subscriberid, N'{F4233E5B-17DC-4661-9ABC-6707A9F99215}', N'My Sample

Callout Module', N'')



--Insert into EntityEventSubscribers

declare @entityid uniqueidentifier



--Account(post-create, post-update, post-delete)

select @entityid = EntityId from Entity where ObjectTypeCode = 1

update Entity set EventMask = EventMask | 1 where ObjectTypeCode = 1



insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(2, @entityid, @subscriberid, 0, 1, 0)

insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(8, @entityid, @subscriberid, 0, 1, 0)

insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(32, @entityid, @subscriberid, 0, 1, 0)



--Contact(post-create, post-update, post-delete)

select @entityid = EntityId from Entity where ObjectTypeCode = 2

update Entity set EventMask = 1 where ObjectTypeCode = 2



insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(2, @entityid, @subscriberid, 0, 1, 0)

insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(8, @entityid, @subscriberid, 0, 1, 0)

insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(32, @entityid, @subscriberid, 0, 1, 0)



--Customer Address(post-create, post-update, post-delete)

select @entityid = EntityId from Entity where ObjectTypeCode = 1071

update Entity set EventMask = 1 where ObjectTypeCode = 1071



insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(2, @entityid, @subscriberid, 0, 1, 0)

insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(8, @entityid, @subscriberid, 0, 1, 0)

insert into EntityEventSubscribers(EventId, EntityId, SubscriberId,

CalloutOrder, IsEnable, IsAsyncHandler) values

(32, @entityid, @subscriberid, 0, 1, 0)



I hope somebody can help me



Thx Andre Grumbach

Read only fields based on picklist values

Posted: 01 Mar 2004 07:43 AM PST

Hi Jakob, the only event supported for the picklist is the onchange event,
so you would only be able to enable/disable fields when a user picks a value
(not when the form is opened or saved). You need to set the field to
disabled, as well as changing the style.

There are ways to add other javascript events to form fields, but it's not
currently supported or documented.

Mike

greaterthantwo media
Printable Quotes, Orders and Invoices, with line-item details,
nowavailablefor MSCRM.
http://www.greaterthantwo.com


"msnews.microsoft.com" <dk> wrote in message
news:OPa6uP6$phx.gbl... 

Is it poosible to custmize the form printouts?

Posted: 01 Mar 2004 12:36 AM PST

Hi Alper, the SDK allows you to create custom web pages that can pretty much
do anything you want to program them to do. So if you want to build your
own web page to print case out in a different format (i.e. including the
address), then you could use the SDK to learn how do this. There is nothing
specific about printing, you just need to create a web page that contains
the case data formatted in the way you want. The SDK gives you the
programming API to be able to access CRM data, and integrate your web page
into CRM by adding custom toolbar or menu options. You need expereince with
web development to do this.

Another option, as Gary mentioned, is to create or edit a crystal report to
print the information you need. You can also make the crystal report open
from a toolbar button or menu option.

Mike

greaterthantwo media
Printable Quotes, Orders and Invoices, with line-item details, now
availablefor MSCRM.
http://www.greaterthantwo.com


"Alper Can" <com.tr> wrote in message
news:eZsrab9$phx.gbl... 
the 

Populating fields from Custom form to an Original form

Posted: 29 Feb 2004 08:04 PM PST

Dirty solution
In your onload-event add something like
MyForm.Mycontrol.value = window.opener.crmForm.name.value
Subscribe to: Posts (Atom)