Pages

Search

Exchange 2003 OWA and recieving forwarded contacts - Microsoft Exchange

Exchange 2003 OWA and recieving forwarded contacts - Microsoft Exchange

Exchange 2003 OWA and recieving forwarded contacts

Posted: 21 Sep 2005 12:52 PM PDT

Oh yeah...I am aware of that, but i am not sure I believe that in this case.
in OWA, when you create a new contact you use the same form on OWA that this
attachment opened in. Its not that OWA needs some work around to open it up,
it knows what it is and opens it in the correct form. It goes that far, why
just stop there. Your remark would indicate that a user is unable to create
contacts in OWA.

"Ed Crowley [MVP]" wrote:
 

Exchange 2003 on Server 2003

Posted: 21 Sep 2005 12:29 PM PDT

Thanks for your recommendation. If I had found a specific newsgroup for
what I wanted, I would have used just that one. Since I didn't...


"Ed Crowley [MVP]" <org> wrote in message
news:eIJ3$phx.gbl... 



----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Exchange 2003 failed restore

Posted: 21 Sep 2005 10:58 AM PDT

Agree with Ed the DR paper from MS is excellent. From what you describe it
sounds as though you have the transaction files in the wrong place or mixed
with transaction logs from other servers.

PaulB
"Ed Crowley [MVP]" <org> wrote in message
news:uNM8q%phx.gbl... 

This email was sent by Me on Behalf of You....

Posted: 20 Sep 2005 11:09 PM PDT



In news:%23Y$phx.gbl,
Thief_ <com> typed: 

Send on Behalf does that. You can set that (and users can set that) in
Outlook.
Send As, does what you're describing now - Joe sends mail that looks like it
came from Mary. And if Send As rights are set on the server itself (you
can't set this in Outlook) it will override the 'send on behalf of' rights
you set in Outlook.

Check for the presence of send as rights....via users or groups - in ADUC.
 

KB 888619 contains old versions of exchange files

Posted: 20 Sep 2005 08:03 PM PDT

Scott

I'm slightly confused by your response. you state that the files that have
changed are different. When I look I find two files listed in both articles
(store.exe and mdbmsg.dll). There isn't a list of files changed and a list of
files touched.

In short however you state I can install the patch over the one I already
have installed, and the newer files will not be overwritten. Meaning that the
newer version contains any fixes (or touches?) of the earlier versions.

What do you mean by "If people are doing the same thing on the back-end as
they do on the front-end, then the patch can easily go on both."? The hot fix
appears to be a patch for OWA. Are the files used by the backend when using
OWA on a front-end to access your mailbox? "Doing the same thing"?? please
explain ...

John

"Scott Roberts [MSFT]" wrote:
 

Adding E2k3 to replace old E2k3

Posted: 20 Sep 2005 07:11 PM PDT

Assuming the name isn't too huge, can deal with that.
Changing the ip to old server ip would make life easier for me because I
have outside pointing inside with that address. Also, I have many sites in my
domain. We are spread all over. Forest prep could take awhile.
So basically, I am just building a W2k3 server loading E2k3, and in the
setup does it ask if I want to join an exchange org? I can't remember.
Last, when I do mailbox move, space will be a concern if data will be added
to the OS disk. If it is the raid 5 set where info store is no problem. I
just don't know which it is?

"Bharat Suneja" wrote:
 

Allowing users to modify distribution lists

Posted: 20 Sep 2005 04:45 PM PDT

Certainly, you can use Delegation wizard in AD Users & Computers to delegate
permissions to change particular user attributes to one user (or Security
Group, just make user member of that group, less hassle when the user leaves
and someone else takes his/her place), and then create a custom MMC to only
include the OUs/Containers that have users.
--
Bharat Suneja
MCSE, MCT
--------------------------------

"Brad" <microsoft.com> wrote in message
news:com... 

E2K3 Server Specs

Posted: 19 Sep 2005 04:35 PM PDT

thanks for your help :)

"Bharat Suneja" wrote:
 

OWA E2K3 Frontend E2K Backend Licensing

Posted: 19 Sep 2005 12:09 PM PDT

For Exchange 2000, Enterprise Edition is required for the front-end.
Standard Edition is supported for the back-end, but you will be limited to a
single 16GB maximum mailbox store.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Dieter" <microsoft.com> wrote in message
news:com... 

How to send a Welcome mail & letting users change password through

Posted: 19 Sep 2005 05:19 AM PDT

There is a mechanism in Outlook 2003 to deliver a welcome mail when Outlook
is installed, but I agree that there is no standard way to do this in
Exchange.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Bharat Suneja" <org> wrote in message
news:phx.gbl... 

Cannot read Thai message from yahoo.com

Posted: 19 Sep 2005 12:18 AM PDT

Dear Sir,

When external users have typed messages in Thai and sent using yahoo mail,
the exchange users cannot read them which the characters are suspicious. I
asked other people for this problem they found the same.

Thank you for your kindly help
Sathit

"Ed Crowley [MVP]" wrote:
 

Free Exchange based web mail?

Posted: 18 Sep 2005 02:59 PM PDT

Mark Arnold [MVP] <org> wrote:
 

Yes, but do you know of any provider of free web based e-mail that uses
Exchange (or maybe Open eXchange or whatever it is called) for it? For
example, a lot of the smaller players use Outblaze. Do you anywhere I
can get free e-mail account where they use Exchange as the server?
 

Don't worry about that. As soon as I find an Exchange-based e-mail
service that supports Outlook's addressbook syncing/sharing I can work
out this myself.

--
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?

archiving

Posted: 18 Sep 2005 02:55 AM PDT


 


Thanks for the reply -I will start archiving from now then.

Thanks for this


David

p7s attachements

Posted: 17 Sep 2005 03:36 AM PDT

"test333" <com> wrote:
 

The ".p7s" file extention is the PKCS #7 signature file. The MIME type
for a file of this sort should be one of these:

application/pkcs7-signature
application/x-pkcs7-signature
application/keychain_access
 

Well, that may be understandable. If the MIME Content-type is
different to the ones above the client should be able to work with the
attachment, but Outlook (being an application) may have different
ideas about that.
 

So it's not an Exchange problem, but an Outlook problem.
 

Yes, that's correct. But when you look at the MIME types for the
different body parts, what are the "Content-type" values for the
different ".p7s" attachments?
 

Sure. Have the chose a different extension for the attachment. They're
certainly free to use anything they like (they could even use .exe or
..com, but that would probably be an even worse choice!), but when they
do so they should be careful to select something without a widely
accepted meaning that differs from the intended purpose of the file.

--
Rich Matheisen
MCSE+I, Exchange MVP
MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm
Don't send mail to this address mailto:com

SBS 2K3 Exchange & Vmail

Posted: 16 Sep 2005 09:46 AM PDT

Perhaps you ought to have your Exchange server hosted by somebody on the
other side of your unreliable T1 line, or perhaps you ought to have a backup
network link. Commercial DSL is pretty cheap in most places. I think
either of those suggestions is far less kludgy than your line of thinking.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Workwithcisco" <microsoft.com> wrote in message
news:com... 

user name resolution

Posted: 16 Sep 2005 04:58 AM PDT

The given name does have all three attributes checked within the schema.
After further test I have checked our old 2k enviroment and using 'check
names' when using only the first name does return a list of all relevant
people within the gal but our new 2003 does not. For example If i wrote
'richard' in the to field then hit check names our old (2k) exch would
return about 10 names. Some would be richard smith, richard cooke, richard
jones others would be debbie richardson alex richards etc etc. The new 2k3
exch would simply show debbie richardson alex richards etc etc. Does this
shed any more light on the issue?

Thanks in advance

Craig


"Ed Crowley [MVP]" <org> wrote in message
news:phx.gbl... 

Exchange 5.5 Export - need to see all smtp addresses

Posted: 15 Sep 2005 02:00 PM PDT

Thanks. Your tip worked. Was in KB153028.


"Ed Crowley [MVP]" <org> wrote in message
news:phx.gbl... 

EXCHG SRVR PROB: unable to open outlook window

Posted: 15 Sep 2005 12:20 PM PDT

Turns out that dns pointed the netbios name to totally different ip address.
TY for your help

"Ed Crowley [MVP]" wrote:
 

exchange 2003 IIS default settings

Posted: 15 Sep 2005 09:19 AM PDT

Thank you very much. The instructions worked. There was one additional step
that was taken.
Under the 'Default Web Site/Home Directory/Configuration/ASAPI CACHE'

We checked this item and restarted IIS and everything starting working

thx jason
"Mr Beaton" <com> wrote in message
news:phx.gbl... 

Public Folders over VPN

Posted: 15 Sep 2005 08:30 AM PDT

Are the public folders on a different server than their mailboxes?
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"RussW" <microsoft.com> wrote in message
news:com... 

Odd things happening with Exchange...What steps can I try?

Posted: 15 Sep 2005 05:21 AM PDT

On Fri, 16 Sep 2005 08:42:57 -0500, "SA Dev" <com>
wrote:
 

Right click it , select dismount.

Restoring a Storage Group after of remove a server

Posted: 15 Sep 2005 05:19 AM PDT

That's right, but when you have to restore a storage group of removed server,
and you use the REcovery Storage Group, you have to specify the same storage
group. Even, after restore restore the storage and you use Exmerge to restore
a mailbox, it doesn't work if the user mailbox is not move to the original
storage.

Thanks

"Kashif Awan" wrote:
 

Help needed - urgent

Posted: 14 Sep 2005 05:12 PM PDT

On Wed, 14 Sep 2005 20:01:03 -0700, ccd
<microsoft.com> wrote:
 

http://support.microsoft.com/?kbid=274343
"How to Recover a Deleted Mailbox in Exchange"



 

Junk E-mails

Posted: 14 Sep 2005 04:10 PM PDT

Yeah, it's pretty crazy, I've never seen this before.

What type of "system" do you recommend?


"Jim McBee (MVP)" wrote:
 

Microsoft Word - Where has the clip art gallery gone?

Microsoft Word - Where has the clip art gallery gone?

Where has the clip art gallery gone?

Posted: 30 Nov 2013 03:09 PM PST

I have always linked straight to the gallery from within a program, eg Word by clicking on the Clips online link.  Now when I click it all I get is the main office.com homepage but if I click on Images it does not take me to the gallery but to an article which is no help at all.

 

Where have all the images gone?

 

Mandy

Microsoft Word 2013

Posted: 30 Nov 2013 02:38 PM PST

No matter what I try I cannot change the color of my text on the screen.   Using the font format command doesn't work - my font is still black.
I'd be most grateful for some help.
Peter Boyle

Word shutdowns my doc and I get a "Word cannot open file" message after

Posted: 30 Nov 2013 11:56 AM PST

I have been working on a large word document and it has shutdown unexpectedly without warning. When i try to reopen the document i get  the message"The file cannot be opened because there are problems with its contents" Details: The name in the end of the tag of the element must match the element type in the start tag. Location: Part: /word/document.xml, line 2, column 3846793"


Where is reveal codes?

Posted: 30 Nov 2013 11:55 AM PST

I have just finally updated to Office 2013. In my old version there was a way to reveal the formatting code with in a document. Where is it now?

Separate headings for endnotes pages

Posted: 30 Nov 2013 11:51 AM PST

I've written a book with endnotes using World 2010 on a Windows 7 system. Following the directions of http://word.mvps.org/faqs/formatting/FootnoteFAQContent.htm#TextAfterNotes I successfully inserted sections following the endnotes pages. But I've had trouble with the header for the pages containing the endnotes.

The endnotes appeared immediately after the text of the final chapter. Since that would be confusing, I set the section containing the final chapter to "suppress endnotes" in Page Layout|Page Setup|Layout and then at the end of the chapter text inserted a Section Break (Odd Page) code. This moved the notes to the next odd page.

However, I have a running header on the odd-numbered [facing] pages that shows the name of the current chapter. Of course I take care that "Link to Previous" is unchecked for odd-page headers in the Header and Footer Tools|Design tab. But even so, the notes pages had the name of the last chapter, and their header was linked to its and could not be independently changed, which was not what I needed.  

I decided that I would try inserting an extra blank section between the end of the final chapter text and the notes pages. This was difficult because Word always makes what seem to be arbitrary changes in the Section Break codes in complicated situations involving several different codes. What I finally wound up with was:

--End of chapter text
--Section Break (Continuous) code
--Blank line
--Section Break (Continuous) code (I think this is unnecessary, but Word won't let me delete it.)
--Section Break (Odd Page) code
--Section Break (Continuous) code (I think this is unnecessary, but Word won't let me delete it.)
--"Notes" title
--Section Break (Odd Page) code
--endnotes pages
--New section in which to insert bibliography and end matter

Each of the sections up to the "Notes" title was set to "suppress endnotes". It was only immediately after the "Notes" title that I unchecked "suppress endnotes".

At the blank line, I inserted page breaks (not section breaks) until I got to an odd page. I edited its header to uncheck "Link to Previous". Then I deleted all of the page breaks, leaving me with a section having just a single blank line between the end of the last-chapter text and the "Notes" title section. Then in the endnotes pages I was able to change the odd-page header without affecting the header in the last chapter.

The next time, doing it from scratch and not having to fight with Word so much on changing Section Break codes, I would try the following order:

--End of chapter text
--Section Break (Continuous) code
--Blank line
--Section Break (Odd Page) code
--"Notes" title
--Section Break (Odd Page) code
--endnotes pages
--New section in which to insert bibliography and end matter

I'd be interested in any ideas anyone else may have about ways to do this.

Can't color letters on Word 13

Posted: 30 Nov 2013 09:50 AM PST

I block the words that I want to change color. Click on the color selector at the top of the screen. When I run the pointer over the colors on the drop-down, the block shading on the text disappears and there is no color change when I click on a color on the drop-down. My system is windows 8, but I use the Windows 7 desktop display.

Surface RT how to open a wps file

Posted: 30 Nov 2013 09:17 AM PST

Is there a way to open a wps file on the surface rt?

Office 365 error (Word 2013)

Posted: 30 Nov 2013 08:37 AM PST

Hello,

MS Office 365, especially MS Word 2013 is crashing quite often when opening a file. But that's not the worst - after restarting, Word offers you some recovering options and there is an error with data: Available Files, name, version created ... 01.01.1601. 2:00 (that was 5 minutes, not 412 years ago).

microsoft office help viewer not responding (office 2007)

Posted: 30 Nov 2013 07:27 AM PST

When I click on the question mark in the upper right hand corner for help in word 2007 I get the help window with the table of contents .  When I try to enter in the search field I get no response. When I clic on the links in the table of contents, I still get no answer. The problem is the same for Excel and PowerPoint

I use Windows 7 64 bits.

I have tried to repair Office via panel control a few times with no impact in solving the issue. I also tried to rename the Microsoft Help files in Program Data and still no impact in correcting the situation.

I am still looking for solving the issue.

File Directory - All Caps

Posted: 30 Nov 2013 03:12 AM PST

Hello Gurus: 


I have a series of files in a file  directory which have been named  (by someone other than myself) using  all capital letters.   From a purely  aesthetic standpoint, I would like use a Word macro  to change all listed filenames within the file directory to  initial capitalization. 


Assuming that this is even possible, I would greatly appreciate  some assistance  in this regard.


Thanking you in advance for any insight, I remain...


Gratefully yours,


Mitch

Background Color

Posted: 30 Nov 2013 02:44 AM PST

I changed my desired page color in word 2007, the entire page got colored but when i printed it, the color border was uneven. As a result some part outside the  page border remained discolored while some part colored which is not desired so either tell me how to get a full page color printout or how to color within the border set for an A4 sized sheet.

 Eagerly waiting for response!!

Pipe symbols appearing intermittently in a large Word document (2007 & 2010 both versions)

Posted: 30 Nov 2013 12:40 AM PST

I have a large word document (about 140 pages). The problem I have is that Word keeps placing a pipe ( | ) symbol throughout the document. The pipes seem to act as a page break, but there are no other 'invisible' symbols like paragraph marks, etc., and using the menu to show invisible characters has no effect on the pipe symbols.

 

I can select them individually, but I can't copy / paste them into the search/replace tool, and there are several hundred instances, and new ones appear as the document grows. They appear intermittently, with no real rhyme or reason as far as I can see. Also, copying a small part of the document with the pipe symbols to a new file has no effect either.

 

Does anyone know WHY these pipe symbols are appearing, and HOW to work with them and remove them permanently? I have attached an image that shows the symbols on a random page.

 

Note: The document is a personal spanish / english dictionary, but I do not think the language is part of the issue.

 

Any help would be appreciated.

Thanks

Roger

 

Letter spacing

Posted: 29 Nov 2013 10:42 PM PST

A font I am committed to has crowded letter spacing, especially in small caps. Is there a way to put a small space between adjacent letters?

Auto Complete for Dates Not Working

Posted: 29 Nov 2013 07:32 PM PST

I use Microsoft Office and Word 2007 and I.E 9 in Vista Home Premium.  After doing some "fixes" for other issues, I lost the feature of Auto Complete for dates.  I tried to restore to an earlier time and that did not fix it.  I also checked the AutoComplete in Internet Options and ran Malware. How can I restore the Auto Complete for dates?


Thanks,


Jerry

Typo in Slovak localization of Word 2013

Posted: 29 Nov 2013 04:47 PM PST

Hello,

I have found a typo in Word 2013 with Slovak localization.


When I press Ctrl+F (search) and type "x", the search finds too many results so it does not display them. This is ok, no problem.

The problem is with the message I get about it: "nAk chcete vysledky..." There is letter "n" which should not be there. Other parts of the message are ok, it's just the letter "n" is not correct and I consider it as a typo.

Office 2007 shortcuts

Posted: 29 Nov 2013 03:39 PM PST

Who had the brilliant idea of changing the old so common shortcuts? How come my save command is now ctrl+F12 instead of ctrl+S, how come my ctrl-Z is now alt+BACK ??

And most importantly - How do I change it back??

Word 2007 in envelopes not printing post code

Posted: 28 Nov 2013 12:36 PM PST

Microsoft word 2007 when printing enverlopes  leaving the post code off
Subscribe to: Posts (Atom)