Pages

Search

Microsoft Word - How do I print correct order for the second side, manual load page printing?

Microsoft Word - How do I print correct order for the second side, manual load page printing?

How do I print correct order for the second side, manual load page printing?

Posted: 23 Sep 2014 03:16 PM PDT

I have a 17 page newsletter, which when printed, using the Manual Load for the other side, works correctly on the ODD pages. The stack comes out in reverse order, such that page 1 is on the top of the stack, as expected.

The program then says to reload the stack to print the other side. I put the stack in, expecting the final result to be that the pages will be ordered such pag 2 is on the other side of page 1, and so forth. However, what happens is the program prints the wrong sequence, such that page 18 is on the other side of page 1, and so forth down to page 2 on the reverse side of page 17.

While researching these archives for an answer, one of the MVPs suggested to someone else to enable the "Reverse Pages" command, which if capable, would solve the problem. However, when the command is issued to insert the stack, there is no option to reverse the pages, that I could find.

Is there a setting that I overlooked that would enable the stack to be ordered correctly?

Normally, with a dumb program I would do a first pass to print "Odd, Forward" and the second pass as "Even, Reverse". 

To be fair, I am new to this program, but I worked with other word processors over the years, but unfortunately, none of them match up to the need of this project newsletter.

ADVthanksANCE

Robert

Mail Merge with Datasource and Mail Merge Letter on Network Drive

Posted: 23 Sep 2014 02:49 PM PDT

I have an excel database that is linked to my organization's database. Is there any reason why the database will update when I save it on my C Drive, but not on the network drive?

Word files won't open from network drive.

Posted: 23 Sep 2014 12:49 PM PDT

Windows 7 Pro

Office 2010 Standard

Computer is connected to the network drive domain. 

Word is the only office program with this problem.

Whenever i Clicked on word file on network drive. Work tries to open then it just stop working. After that i tried to open it again and it tells me that will open in save mode.

Tried to reestablish connection with Network Drive, Repair Office, Re install Office. 

Any suggestion would be appreciated

Spellcheck no longer works in Reviewing Pane/Revisions. Any solutions?

Posted: 23 Sep 2014 12:15 PM PDT

Spellcheck no longer works in Reviewing Plane/Revisions section of document - specifically for Comments. Does anyone know why and how to correct?

Also, numbers no longer assigned to Comments, as shown in Reviewing Pane/Revisions.

Updates for Office 2010

Posted: 23 Sep 2014 11:55 AM PDT

Windows updates reports that we haven't installed any Office 2010 updates since June, 2014. Is there a way to identify outstanding Office 2010 updates?

Fill In The Blank Document Templates? How do I do this?

Posted: 23 Sep 2014 11:40 AM PDT

I think this is probably basic, but I can't figure out where to start.

I often create the same documents over and over, just changing the names.  Letters are an obvious example. 

I would like to create a template property formatted for business letters.  I'd like it to open a new letter with the proper margins and have my letterhead at the top.  I'd like the cursor to start where the date goes and to have a fill-in option to either add the date code or manually enter the date.  Then I'd like to hit tab and have the cursor go to the  "BY" line, with a fill-in for "United States Mail," Federal Express," etc.  Then I'd like to hit tab and have the cursor go to the addressee.  Type in the person, hit tab, type in the address, tab, city, tab, etc.  continue to the area for the body, and then have the signature block at the end.

I thought this would be a form.  But if it is, I can't figure it out.  I've done many google searches, but I'm finding either "mail merge" letters or simple letterhead templates (without the fill in form placeholders).

Can someone point me in the right direction?

(The annoying this is that 20 years ago I could set this up in Word Perfect in about 5 minutes.)

I can't Find My Templates

Posted: 23 Sep 2014 11:03 AM PDT

I'm pretty sure I need to click a setting somewhere.

When I "Save As" for a template, I choose "Word Template".  I note that the options in the drop down box don't show the file extensions (i.e., .doctx).  Is there a setting to show this?  (I've watched some videos on-line, and the file extension is visible.).

I then name and save the template in a Folder "Word Templates".  However, when I open that folder, either in Windows Explorer or using the "Open" function in Word, none of the templates appear.

Help?  

Thank you.

Help! Navigation difficult with WORD 2013

Posted: 23 Sep 2014 10:47 AM PDT

I have a new ASUS laptop with Windows 8.1 and Office 365.  I am having trouble navigating in WORD 2013.  In particular, I cannot figure out how to go to the top or bottom of any document.  Hitting HOME or END does nothing at all and placing CTRL+ before either also does nothing.  There is no cursor movement when I do this.  It works on my other laptop for WORD 2007.  I have consulted keyboard shortcuts and find nothing else to try.  This is weird.  Can anybody help please?  Thanks.  JS

Automatically update page numbering without using F9

Posted: 23 Sep 2014 10:10 AM PDT

Is there a way to have a document automatically update the page numbering (using Page X of Y) without having to select all and press F9? It seems to update automatically on pages 2+, but page 1 does not update if pages are added or deleted. Please help!

Mircosoft Word 2007 document format changing

Posted: 23 Sep 2014 09:35 AM PDT

Hello!  I am having an issue with a Microsoft Word 2007 document that is created at a remote office, moved to a network drive and then opened in the central office.  When I open the document that was created by another user (also using Word 2007) the first page is fine but starting at the end of the second page I have an additional sentence which should be the first sentence of the third page. The problem compounds through the rest of the pages. Any help regarding settings or printer drivers or anything else would be greatly appreciated!! 

2007 Microsoft office system

Posted: 23 Sep 2014 09:06 AM PDT

I have window vista 7

My browser is explorer

I wrote a letter on my microsoft word.  I check with my epson provider about my printer and there's nothing wrong with my printer.  It was working properly before and I haven't change anything in regard to settings or margins on my system.

My problem is when I tried to print my letter a little box shows:  Microsoft office word and shows : " This is not a valid print range, show help>>>>>"

I will truly appreciate if someone can guide me on this problem that I cannot solve and cannot find solution.  I am not very well verse with computer and just learning things as I go by.

Thank you,

Daisy

Font issues after upgrading to Word 2013

Posted: 23 Sep 2014 08:45 AM PDT

I upgraded from Word 2003 to Word 2010 recently.  I manually installed/transferred fonts from my old computer to my new computer.  I use some True Type fonts that do not display correctly in the document, but print correctly.  The font indicates that it is correct - (Serpentine) in the document, but the font is being substituted for some reason.  I have tried converting my old Word doucments to the docx format, but this hasn't helped. 

How can I get word to display my fonts correctly.  Thanks!   

Word 2013: Basic Stuff -- What is a Style Set

Posted: 23 Sep 2014 08:41 AM PDT

When I open a new, blank document, there are a bunch of styles in the style box on the Home tab.  Is this one "Style Set"?  If so, does it have a title?

When I go to the Design tab, there a bunch of things in the ribbon that look just like the box of styles on the Home tab -- but I think they're different. Is each of these a "Style Set"?

If I hover over the thing in the Design tab, it tells me, I guess, the name of the Style Set, i.e., "Basic (Elegant)".  How can I know what the styles are for this set?  

Do I click it and go back to the Home tab to see all of the Styles that are in that set?  And for each Style I need to hover over it to see what it does?  

Has the person who designed this been fired?

Previously working citations becoming "invalid source" - word 2010

Posted: 23 Sep 2014 08:25 AM PDT

Document is accepting sources being added, but I seem to be having problems with them becoming invalid for no apparent reason.

Have the trust settings set to allow websites (as per advice in other threads).

Really don't want to have to go through and change each citation to manual. The regedit solution posted on a similar problem raised in 2011 doesn't seem to bare any relation to the actual files that I have, and thus is useless.

changing text selection color

Posted: 23 Sep 2014 08:16 AM PDT

In Word 2002 the background color of selected text or tables is black. Is there any way to change this color?

I need to create a Macro that will find an @ sign individually.

Posted: 23 Sep 2014 07:31 AM PDT

I have been involuntarily switched to Word 2013.  I have a macro that I use constantly and I have been unable to re create.  Here is what I need it to do:  I have many @ signs as placeholders in my documents.  The @ signs must be replaced individually with different information.  For example: The quick brown @ jumped over the lazy @.  I need to be able to hit a key and go to the first @  where I will type "fox" and then to the next where I will type "dog".

My previous macro was the F9 key that did a find search for the @.  I can't seem to get it recorded to do this now.  ANY HELP APPRECIATED!!

VBA merge hanging

Posted: 23 Sep 2014 07:10 AM PDT

Hello,

I have a Word document i want to mailmerge to several Email addresses via an attached PDF.

For that, I have a macro that first create a PDF (the Word merged) and then send it via an Outlook Email as attachment. (see code below)

My problem is that the merge sometimes hangs on without any message, nor errors. It's like blocked,.... I've made a test case with 2 or 3 Email and there it is working, but for 100,...

Do you have any idea where to look for?

Thanks for your suggestions.

Sub PA_mailmerge_with_pdf() '
' This macro merge a word document to PDF
' File name is docName. Can be modified
'
    Dim fd As FileDialog
    Dim oItem As Outlook.MailItem
    Dim oOutlookApp As Outlook.Application

    'Create a FileDialog object as a Folder Picker dialog box.
    Set fd = Application.FileDialog(msoFileDialogFolderPicker)
    With fd

        'Use the Show method to display the Folder Picker dialog box and return the user's action.
        'The user pressed the button.
        If .Show = -1 Then
                For Each vrtSelectedItem In .SelectedItems

                'vrtSelectedItem is aString that contains the path of each selected item.
                'You can use any file I/O functions that you want to work with this path.
                'This example displays the path in a message box.
        SelectedPath = vrtSelectedItem

        Next vrtSelectedItem

        Else
        MsgBox ("No Directory Selected.  Exiting")
        Exit Sub
        End If
    End With

If MsgBox("Do you want to send Email?", vbYesNo, "Mail merge or only PDF") = vbYes Then
MailMerge = vbYes
Else
MailMerge = vbNo
End If

' Show an input box asking the user for the subject to be inserted into the email messages
message = "Enter the subject to be used for email message."    ' Set prompt.
title = " Email Subject Input"    ' Set title.
' Display message, title
mysubject = InputBox(message, title)

    'Set the object variable to Nothing.
    Set fd = Nothing

Application.ScreenUpdating = False

MainDoc = ActiveDocument.Name
    ChangeFileOpenDirectory SelectedPath
    For i = 1 To ActiveDocument.MailMerge.DataSource.RecordCount
        With ActiveDocument.MailMerge
            .Destination = wdSendToNewDocument
            .SuppressBlankLines = True
            With .DataSource
                .FirstRecord = i
                .LastRecord = i
                .ActiveRecord = i
                MailSubject = " " & .DataFields("FN").Value & " " & .DataFields("LN").Value 'FN is the first name and LN is the lastname field in the mail merge
                docName = mysubject & MailSubject & ".pdf"   ' ADDED CODE
                mailName = .DataFields("email").Value 'email is the Email field in the mail merge
                
            End With
            .Execute Pause:=False
    Application.ScreenUpdating = False
            
        End With
   
   ' this part is to merge to a DOC iso a PDF
   ' ActiveDocument.SaveAs FileName:=docName, FileFormat:= _
   '     wdFormatXMLDocument, LockComments:=False, Password:="", AddToRecentFiles _
   '     :=True, WritePassword:="", ReadOnlyRecommended:=False, EmbedTrueTypeFonts _
   '     :=False, SaveNativePictureFormat:=False, SaveFormsData:=False, _
   '     SaveAsAOCELetter:=False
   ' ActiveWindow.Close

   ' this part is to merge to a PDF iso a DOC
    ActiveDocument.ExportAsFixedFormat OutputFileName:=docName, _
        ExportFormat:=wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
        wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _
        Item:=wdExportDocumentContent, IncludeDocProps:=True, KeepIRM:=True, _
        CreateBookmarks:=wdExportCreateNoBookmarks, DocStructureTags:=True, _
        BitmapMissingFonts:=True, UseISO19005_1:=False
    ActiveWindow.Close Savechanges:=False
   
    If MailMerge = vbYes Then
        
    On Error Resume Next
        Set oOutlookApp = GetObject(, "Outlook.Application")
        If Err <> 0 Then
            Set oOutlookApp = CreateObject("Outlook.Application")
            bStarted = True
        End If
        
    Set oItem = oOutlookApp.CreateItem(olMailItem)
    With oItem
        .Subject = mysubject & MailSubject
        .Body = ""
        .To = mailName
        .Attachments.Add SelectedPath & "\" & docName
        .Send
    End With
    Set oItem = Nothing
    
    End If
   
    Windows(MainDoc).Activate
    Next i
Application.ScreenUpdating = True

End Sub

Shared files sent from word don't show up on outlook sent folder

Posted: 23 Sep 2014 07:08 AM PDT

Using Office 2013 on Win 8.1. Can successfully share documents via email from within Word but when I look at the Outlook Sent folder there is no evidence the file was sent although I know it was received. Why doesn't it show up in Outlook (which BTW is the only email read/send on my Surface Pro 2). This is turning out to be a major problem!

NEED HELP PLEASE - Hide or delete command buttons when printing a Word 2010 document

Posted: 23 Sep 2014 05:07 AM PDT

Is there a macro for printing that will hide several command buttons? The command buttons have nothing to do with printing, so I'm not looking for the hide event when the button is clicked. Their function is to delete the pages within its section. I read about using hidden text, but then the user has to have the show/hide button on, and they would not know that. Any help with this is greatly appreciated!

Possible incompatibilities with previous versions

Posted: 23 Sep 2014 04:51 AM PDT

I have made several word documents that are advertisement flyers with pictures and text. I made them with a previous version of Word. I have recently had my computer replace with a new one and a newer version of office. I am using office 2013 currently. When I open any of my previous documents they are a mess when they open. Instead of 2 pages they are 3 pages and the text is all wrong. Things are just scattered all over the place. I have a lot of time invested in these documents and I would rather not start them all over again. Can 2013 just open a previous version without messing it up?

Footnotes end higher up on the page than normal text

Posted: 23 Sep 2014 03:39 AM PDT

I'm working on a document with footnotes. On the pages where there is a footnote, the text ends higher up on the page than it should--ie, the footnote stops well above the footer. On pages where there are no footnotes, this doesn't happen--the text goes all the way to the end of the page. This means that some pages have a lot of white space at the bottom without any reason for it. I've checked the footnote formatting, and it is Bottom of page.

I can live with a little difference in spacing but this is annoying. Do you know why Word is doing that?


Thanks!

How do I tell if the Fan is working on the SVD132190x

Posted: 23 Sep 2014 12:24 AM PDT

So I was Having trouble finding out how to test my sony vaio's fan because my laptop/tablet was having terrible throttling issues where i downloaded prime95 to see if i could stress test the cpu to get the fan to come on... And the cpu would just sit at 33% and about .6 ghz. So I was like this is probably a fan issue how do i test that? ... Microsoftword(random)

Issue with Dhivehi Printing

Posted: 22 Sep 2014 11:23 PM PDT

We are having an issue of printing documents written in Dhivehi in Microsoft Word 2013. When printed, the format changes and some of the text is missing. Even if the document is changed to PDF, the same happens. We found it to be happening after Word 2013 being updated as before that it works fine. So we assume that it is due to an update.

It has been checked with different Dhivehi fonts including the default MV Boli. Attached please find a Word document and how it has been changed in PDF.

 

Appreciate if a solution for the issue could be provided as soon as possible.

Automatic picture numbering with chapter number (own caption style)

Posted: 22 Sep 2014 10:10 PM PDT

Good morning,

I want to number my pictures in Word 2013 as follows: "Pic. x.y" where x is the actual chapter number and y the number of the picture in this chapter.

My problem is that I created my own style for captions. In the menu for automatic picture numbering I can only choose the standard word styles for captions and not my own styles. 

How can I fix this problem?

Thank you and best regards,

C.S.

Cannot open .dot files when i double click

Posted: 22 Sep 2014 06:55 PM PDT

Hi there,

I've upgraded my MS Office from 2007 to 2010 using OS Windows 7 64bit & started working on Office WORD & it was OK, BUT when trying to open a .dot & .dotx file it can not OPEN when i double click on the file BUT i can see it running on the background processes. BUT when i open a Blank or New Document & trying opening a .dot file it opens OK. However, this process so frustrating, is there any way I can fix this BY just double click on the  .dot file & it opens?

Font dialog box SAMPLE text appearing in another language?

Posted: 22 Sep 2014 04:51 PM PDT

The SAMPLE text which appears next to each font, in the Font Dialog box, is not in English. Also, several fonts are not shown. I have uninstalled and reinstalled. I have not messed with anything that I know of.

I have attached a screen shot.

Paragraph justification problems

Posted: 22 Sep 2014 04:45 PM PDT

In editing a manuscript, I am going through each chapter using Ctrl H - (Find and Replace) to locate the changes I want to make.  All of the sudden I am seeing a problem I have never seen before.  When I click on replace, the whole paragraph where the change has been made ends up being right justified.  I contacted Microsoft support and they logged onto my computer and after an hour they reloaded Word and disconnected. 

I am using Word 2013 and pay the monthly support fee so I should have the latest updates. 

Anyone have any idea what might be causing this?  I have never had a problem with Word like this before.

Thanks

Cannot Remove a OneDrive "Place" in Microsoft Office

Posted: 22 Sep 2014 03:39 PM PDT

Hello,

In Microsoft Word 2013, if you click on File - Add A Place - OneDrive, and enter your Windows Login Information: it creates a new Onedrive "Place" for easy file saving. The problem is removing this "Place". I unknowingly added my Onedrive as a new "Place" on a friends Microsoft Word 2013 account, and now am unable to remove it. It is very important that I find a way to remove this, since I don't want him to constantly have access to my files. In addition, his machine is experiencing other technical difficulties, so he would like to remove my OneDrive for troubleshooting purposes.

Please help me find a way to remove my OneDrive Place from his Microsoft Office Account.

Thank you in advance for any assistance,

Luc

FC6 does not find SATA disk on install - Forums Linux

FC6 does not find SATA disk on install - Forums Linux

FC6 does not find SATA disk on install

Posted: 20 Mar 2007 09:24 AM PDT

Richard Vaughn wrote:
 

When you boot the FC6 install type at the boot prompt:
linux all-generic-ide

You will need to pass that to grub as well so: (watch the line wrap)

title Fedora Core (2.6.19-1.2911.6.4.fc6)
root (hd0,5)
kernel /boot/vmlinuz-2.6.19-1.2911.6.4.fc6 ro root=/dev/hda6
all-generic-ide

you will need to change the hd as suited for your system


Works for my Inspiron 1501

--
Dancin in the ruins tonight
Tayo'y Mga Pinoy

How to startup in text mode console

Posted: 20 Mar 2007 01:33 AM PDT

Ciao Davide Bianchi,

Grazie per la risposta, ma purtroppo non riesco a leggerla;
infatti leggo i newsgroup da Web e per la tua riusposta nel
thread non viene visualizzato il link ipertestuale.

Ho comunque risolto il problema facendo l'installazione
da consol testuale; al boot mi viene presentato il prompt dei comandi
della console testuale. Io devo modificare il file di configurazione
di X in modo tale che la scheda video produca una risoluzione
1280 x 1024 a 60 Hz; è appunto questo file che ora non riesco a
trovare perché me ne sono dimenticato il nome.

Puoi dirmi qual è questo file?

Grazie,

Francesco




"Francesco Barbuto" <it> wrote in message
news:mailgate.org
 




--
Posted via Mailgate.ORG Server - http://www.Mailgate.ORG

config iptables to allow NFS-mount thru firewall: how?

Posted: 19 Mar 2007 07:57 AM PDT

On Mon, 19 Mar 2007 10:12:37 -0500, Ivan Marsh wrote:
 

NFS support daemons (mountd, rpc.lockd, etc) use dynamic ports for RPC.
You will have to lock down to a specific set of ports in
/etc/sysconfig/nfs. Here is an example:

MOUNTD_PORT=777
RQUOTAD_PORT=778
LOCKD_TCPPORT=779
LOCKD_UDPPORT=779

Allow these ports through your iptables rules, in addition to 'nfs' and
'sunrpc'.

Accessing Root Folder

Posted: 17 Mar 2007 03:22 PM PDT

On 2007-03-17, com wrote: 

You have probably emptied your PATH variable. Try this:

export PATH=/bin:/usr/bin:/sbin:/usr/sbin

That should allow you to access external commands.

--
Chris F.A. Johnson, author | <http://cfaj.freeshell.org>
Shell Scripting Recipes: | My code in this post, if any,
A Problem-Solution Approach | is released under the
2005, Apress | GNU General Public Licence

Is it possible to divert files to null space using dpkg-divert?

Posted: 17 Mar 2007 10:03 AM PDT

spike1 writes: 

From the apt-get man page:

-s, --simulate, --just-print, --dry-run, --recon, --no-act No action;
perform a simulation of events that would occur but do not
actually change the system.

--
John Hasler
gt.org
Dancing Horse Hill
Elmwood, WI USA

characters encoding

Posted: 17 Mar 2007 08:10 AM PDT

J.O. Aho wrote:
 

Thanks

Do I need AMD Athlon 64 Cool'n'Quiet Driver for Linux?

Posted: 16 Mar 2007 09:09 PM PDT

On 03/17/2007 06:59 PM, Ant wrote: 

You can also type "dmesg | grep powernow".

At least for me (running a socket-939 Opteron 185), this gives:

| steffen@pc01:~> dmesg | grep powernow
|
| powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4)
| powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 (1350 mV)
| powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa (1300 mV)
| powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc (1250 mV)
| powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe (1200 mV)
| powernow-k8: 4 : fid 0xa (1800 MHz), vid 0xe (1200 mV)
| powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0xe (1200 mV)

And "/proc/cpuinfo" shows the clock speed that the CPU is running
with at the moment (quite idle):

| steffen@pc01:~> cat /proc/cpuinfo | grep "cpu MHz"
|
| cpu MHz : 1004.647
| cpu MHz : 1004.647

When loaded, it goes up to:

| steffen@pc01:~> cat /proc/cpuinfo | grep "cpu MHz"
|
| cpu MHz : 2612.082
| cpu MHz : 2612.082

Getting results like these will show you that CnQ is working correctly.

HTH!

Best regards,
Steffen

How to reduce partition size - safely?

Posted: 15 Mar 2007 05:53 PM PDT

Frans,

I've used Partition Magic quite often with success. It allows me to
resize the Linux and XP partions and I've never lost any data.

Chris

Frans van Duinen wrote: 

cramfs - No filesystem could mount root . . . fix

Posted: 15 Mar 2007 04:46 PM PDT

com wrote: 

 


I guess I should have ran this experiment beforehand, but for the
record, at least with 2.6.20.1, which would also make me think that
2.6.20 is the same way, cramfs is not needed for a simple RAM
disk. The 2.6.20.1 I built has no cramfs support built in, and I just
used it to boot a mini-system (one floppy only) disk without cramfs
nor kernel modules support.

Prehaps (the OP) changed something else during the rebuild that
accounted for this, in addition to cramfs, than forgot it was
changed. Wrong disk-controller support prehaps? If the disk can't be
read due to a controller problem, the kernel cycles thru the
filesystems it has trying to read a disk it won't be able to.




--
Turn OFF the Javascript: Don't support data-mining.
Google already knows enough about *you*. (and you, and you...)

<!-- Google Skyscraper Ad -->
<script type="text/javascript"><!--
google_ad_client = "pub-0078565546631069";

<script type="text/javascript"
src="http://pagead2.googlesyndication.com/pagead/show_ads.js">

GRUB, Debian, Solaris, WinXP

Posted: 15 Mar 2007 06:54 AM PDT


"001" <com> schreef in bericht
news:45f95b36$0$30310$tele2.nl... 

I made a mistake in my previous message... before doing a setup(hdx) on the
grub prompt you should issue a 'root(hdx,x)' your menu.lst will be read from
the partiotion you specify here. On my machine for example the
linux-partition is a totally different one from the one on which I boot my
MBR.

Ubuntu installation form the hard disk

Posted: 15 Mar 2007 06:49 AM PDT

> There are alternate methods for installing Ubuntu, if you have no CDROM, 
Thanks a lot.

Bartek

[ Hz ? ] problem after installing fedora core 6

Posted: 15 Mar 2007 12:34 AM PDT


<com> schreef in bericht
news:googlegroups.com...
On Mar 15, 6:32 pm, "001" <com> wrote: 


hey thanks for replying ,
u guys are relly helpful,

but i am very new to all these concepts .
i have to press ctrl+alt bksp while booting the machine right...??
& is the file is editable on the command prompt ...?? if no what
commands shud i use for editing & saving it...??
exactly what shud i edit in the file....??

plz reply....

OK... what you need to do is kill the X-server with the key-combination I
told you about and do that when your PC is already booted... if that doesn't
get you to a command prompt... try using a LiveCD like knoppix to mount your
HD and edit the file from there.

I said you should issue 'nano /etc/X11/xorg.conf', nano is a text edit so
that not a prompt anymore and then you should quit nano (saving first of
course) by hitting Ctrl-C (I think, but its marked anyway).

What you should add is these lines:

HorizSync xx-xxx
VertRefresh xx-xxx

under Section "Monitor"

and make sure you replace the x's by the refresh rates from your monitor's
manual.

If you're afraid... don't be, just try... that how I figured out these
things too... and for these kind of problems there's plenty of documentation
by just googling too.


Sincerely,

Stéphane

Transferring data from one distribution to another ...

Posted: 14 Mar 2007 09:46 PM PDT

On Thu, 15 Mar 2007 17:46:48 +1300, David Love <net.nz> wrote:
 

Aren't all of these in your home directory? I know of no reason why you
cannot share your home directory between distributions. (There may be
one, though; I'm relatively new to Linux.)

--
The "mypacks.net" address from which this message was sent is
legitimate and not spam-trapped. It is, however, disposable.

Microsoft CRM - Attachments Folder

Microsoft CRM - Attachments Folder

Attachments Folder

Posted: 03 May 2005 04:05 AM PDT

No problem :o)

"Raja Sekhar" wrote:
 

Integrate PDA with Microsoft CRM

Posted: 03 May 2005 03:45 AM PDT

Yes, for contacts you can! Any device that can synch with Outlook contacts
can do this; PDA, mobile phones, etc. Read this excellent article by the
folks at c360:
http://sdm3.rm04.net/servlet/MailView?ms=MjE0MDMwS0&r=NTk2OTgyMzI0S0

KjellSJ
http://kjellsj.blogspot.com


"Ethel" wrote:
 

Change fields

Posted: 03 May 2005 12:44 AM PDT

Thnx Christian this really helped me.
But now i have another problem. I'll use the same example 'Price per
Unit'.This field is still not edible. It's necessary for our work to edit
that. Can you help me with that?

S. Oumoulid

"Support www.MSCRM-ADDONS.COM" wrote:
 

Replicated AD in CRM

Posted: 02 May 2005 06:03 PM PDT

Thanks for the reply John.
Office1(overseas) and Office2(here)
Both offices are on the same domain.
Active Directory/Domain is based in Office1 and replicated to Office2.
We are doing the install at Office2.
Both offices have their own individual MS Exchange etc etc.
Thanks again!

"John O'Donnell" wrote:
 

Task Pane Integration with CRM Contact Records

Posted: 02 May 2005 10:43 AM PDT

Hi Brent,

Thanks SO MUCH for clarifying this for me. It did sound like it was
something easy to implement and I will have my implementation team look into
to.

Shauna

"Brett meyer" wrote:
 

modifying the subject guid

Posted: 02 May 2005 10:27 AM PDT

Don't quote me on this.. :) but I believe this cumulative update will cause
the GUID to appear several tabs across in email titles, as opposed to a space
or two after the title.

http://support.microsoft.com/kb/840934/EN-US/

Regards

Dan


"John O'Donnell" wrote:
 

Propagate info from Account to Sub-Account

Posted: 02 May 2005 09:03 AM PDT

Thanks for you answer...then mappings will not help me...
Could you please tell me a little bit more or link me somewhere regarding
Post Callout?

Thanks
Eric

"Matt Parks" <com> wrote in message
news:com... 

to extend a contract

Posted: 02 May 2005 08:16 AM PDT

Our sales department keep an eye on the contracts so when the contract is
almost full they call the customer for a new contract. What we would like is
the possibility that CRM automatically substract the amount of time of the
old contract and what is left from the new contract.


"MattNC" <microsoft.com> schreef in bericht
news:com... 

Citrix and mailmerge

Posted: 02 May 2005 03:20 AM PDT

Thx John, we don't have a test environment for Citrix yet and an other
question came up. But I will start a new thread for that one.

Bas

"John O'Donnell" wrote:
 

CRM should include a spell checker

Posted: 29 Apr 2005 06:30 AM PDT

Brandon,
I agree that CRM should have more features out of the box, but when it
comes right down to it - even Microsoft has to make resource tradeoffs.
The Microsoft vision is low TCO, high volume, and for CRM, it's build
out the platform, and rely on the ISV market to plug the holes.

Now, spell check is something that I think most would agree should be
in the core product; but you'll never please everybody all the time,
and by letting ISV's plug holes, MS can continue delivering a solid
foundation.

And that's really their plan - deliver the foundation, and make it easy
for everybody to get the CRM they want. Customers can then search the
world for the best add-on products, or build what they need. It seems
to be a pretty good model for them...

Dave
-------------------------------------------------
David L. Carr, President
Visionary Software Consulting, Inc.
Main #: 971-327-6944

Introducing our newest software product...
VAST - an auditing solution for Microsoft CRM 1.2
VAST shows you "Who Did What When" in Microsoft CRM
To download our free trial, get more info, or to order, visit
http://www.VSCRM.com

Exchange Server locate in different windows domain

Posted: 28 Apr 2005 10:10 PM PDT

Is both domain require trusted domain before? Thank you.

CM

"Peter Lynch" wrote:
 
Subscribe to: Posts (Atom)