Pages

Search

REPOST - Exch 2k3 conflicts with AV Software - Microsoft Exchange

REPOST - Exch 2k3 conflicts with AV Software - Microsoft Exchange

REPOST - Exch 2k3 conflicts with AV Software

Posted: 27 Aug 2004 07:28 AM PDT

I tried uninstalling the program and rebooting. Stopped
causing the WMI errors, but did not re-enable mail
sending. I then re-ran Exch SP1 and rebooted. Still no
outbound email. Also tried re-running the Connect to
Internet tool to ensure email was allowed. No go. I did
submit an email trouble request to the vendor this
morning - haven't heard back yet. Might try as a last
resort to re-install Exchange and SP1 (although, I think I
tried that come to think of it). :[
 
reboot the server? 
aware of any issues? 
message 
settings 
(worked 
times. 
stamp 
stamp 
using 

Sounds like a virus but is it?

Posted: 27 Aug 2004 02:04 AM PDT

I'm told not! and I don't think they would have BCC it to the whole company
(but then they are users :-) ), also its more then one user reporting the
problem but no on all emails!!

I thought I had read about a virus that did this but I cannot find any info
on it so may be not.

"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Exchange won't let Outlook 2000's Rules Wizard forward mail

Posted: 27 Aug 2004 01:07 AM PDT

Exchangeserver is 5.5 and client is Outlook2000. I don't have permission to
change any server configuration. But I think it could solved anyway? From my
client that is..

BR/Johan

"Mark Arnold [MVP]" wrote:
 

Exchange Server 2003 / Domain Controllers

Posted: 26 Aug 2004 06:01 PM PDT

Indeed. All you do lose without 2k3 DC's is some functionality, the
more high profile of which is RPC over HTTPS.

On Thu, 26 Aug 2004 21:12:46 -0400, Andy David - Exchange MVP
<com> wrote:
 

DMZ zone?

Posted: 26 Aug 2004 03:47 AM PDT

OK - not sure what you mean, then. Can't you just send mail to the SBS
mailboxes across the Internet? What sort of mail are they supposed to be
getting from your server - they can't be collecting mail from yours, since
they don't have the same domain -

Dances wrote: 

Black Hole e-mail

Posted: 25 Aug 2004 02:04 PM PDT

Sure,
dont accept forged mails. Reject them right away with a 55x.
check www.aloaha.com to learn how to do it.
Frank



+++
Server protected by Aloaha
+++

"Russ" <microsoft.com> schrieb im Newsbeitrag
news:021601c48ae7$1ce73750$gbl... 

Exchange problem and AD

Posted: 25 Aug 2004 02:43 AM PDT

I think if the references for old server stays in AD, it does not matter.
Ok, run te forestprep and domainprep once again and install exchange 2003 on
proposed server.
Manually, change the user for 'mail enabled ' property in Active Dir Users
and Comps, you will be able to change it easily after you have installed
Exchange 2003.

Regards,
Anil


"Solange Trombini (MSFT)" <microsoft.com> wrote in message
news:phx.gbl... 

Exchange Licensing question

Posted: 24 Aug 2004 01:36 PM PDT

In article <com>,
Matt Scoff <com> wrote:
 

Disclaimer: I'm not a licensing person.

According to http://www.microsoft.com/exchange/howtobuy/enterprise.asp, you do need CALs for POP3 users, at least if you consider POP to be a
"standard Internet-messaging client": 

As always, if you really want the real scoop on what licenses *you*
need, contact your local MS rep.

Cheers,
-Paul

--
Paul Robichaux <org>
MVP - Exchange
Exchange security book: http://www.e2ksecurity.com
FAQs: http://www.swinc.com/resource/exchange.htm &
http://www.swinc.com/resource/e2kfaq.htm

Synching GALs between Unix/EXCH

Posted: 20 Aug 2004 11:17 AM PDT

Simple-Synch looks like a winner. Thanks!


"Mark Fugatt [MVP]" <com> wrote in message
news:phx.gbl... 

invisible Attachments

Posted: 20 Aug 2004 08:58 AM PDT

Its depends are they invisible because of the attachment security options in
Outlook ?. You might want to have a read of
http://www.slipstick.com/outlook/esecup/getexe.htm

cheers
Glen
"David Sengupta [MVP]" <sengupta@*NO*ncf*SPAM*.ca> wrote in message
news:phx.gbl... 

Microsoft Word - Word 2007 message when I try to open it

Microsoft Word - Word 2007 message when I try to open it

Word 2007 message when I try to open it

Posted: 06 Apr 2013 06:33 PM PDT

I am getting a mesasage everytime I try to open Word 2007 work could not create the word file check the temp environment variable

word documents keep showing up as word pad

Posted: 06 Apr 2013 10:40 AM PDT

i re-installed office but all my word documents keep showing as word pad? .what is word pad and how do I get the documents back to word? thank you

Table of Contents - Words

Posted: 06 Apr 2013 07:19 AM PDT

When I create a word 2007 document from a template that has Heading 1 for an Article and Heading 2 for Sections, the word document looks like this:

 

Article I 

 

ARTICLE TITLE

Section 1.1            Title.   Words after the title.

And then when I create a Table of Contents. the words in the table of contents with respect Section 1.1, shows the addtitional words, not just the word Title and the Article Title does not show up   And it shows up like this:

 

TABLE OF CONTENTS

 

 

Article I 1

Section 1.1      Title.   Words after the title. 1

 

I researched and found the concept to create the TC Fields entries by highlighting the word Title and, click on alt+shift+O, and then  mark it.   And then go to the table of contents, click on alt+F9, and then do the following, hit alt+f9 again and then update the table of contents, and it should recogize just what I marked.   

 

type \f at the end of the field.

It will look as follows:

{ TOC \o "1-3" \h \f }

But this does not do it.

 

So does anyone know how to do this.  Thanks much.

 

 

 

 

 

 

Why do you need to sign in to "get the most out of office?"

Posted: 05 Apr 2013 11:06 PM PDT

What's the deal with having to "sign-in" to get the most out of Office?

 

I use Office for business purposes, other than the licensed Office product which I have purchased, Microsoft has nothing to do with my business.

 

My business does not have a Microsoft ID, nor does it want one.

 

If I pay for a product and receive a licence to use that product, I would expect to use that product to its full extent, and not receive a partial and withheld service.

Unable to delete text in comments

Posted: 05 Apr 2013 06:22 AM PDT

I checked https://connect.microsoft.com/) and don't see Word 2013 listed so I figured I'd post this potential bug report here. 

In Word 2013, when I click three times in a comment bubble to highlight all of the text in that bubble, hitting the Delete key does not allow me to delete the text. 

This was also the case in earlier versions of Word, but now there is a new problem: In 2010 I used to be able to click three times to select the text and then hold the Shift key down and hit the left arrow one time. This would then allow me to delete all text.  Now, in Word 2013, hitting Shift + Left does not register on the screen, so I cannot delete the text.  

The same problem occurs if you click once in the bubble and hit Ctrl + A or if you manually highlight the text in the bubble with the mouse (of course in that last case if you highlight all the way to the very end, including that final "space" or whatever it is where the problem occurs). 

Do others experience this? If so, can we report it to Microsoft? Although it's not a huge issue, little things like this slow users down (because, in this case, it makes the Ctrl + A function within comment bubbles somewhat limited). Plus, it wasn't a problem in 2010, so it seems fixable. :)

How to create Encrypted with Password documents from Word 2010 template?

Posted: 04 Apr 2013 09:36 AM PDT

I would like to create a Word 2010 template such that any document created from that template is automatically set with Encrypt with Password using the password picked-up from the template.

 

What I have tried is this: I set Encrypt with Password on the template.  I then create a document using the template - I have to enter the correct password for the tempate to open - so far, so good.  I then save my new document.  When I come back to open the newly-created document, it asks me for a password to open the document.  This looks correct, but what I have found is that I can enter ANY text for the password (or no text at all) and the document will still open.  When I then check the Protection properties for the document it says that the document is NOT Encrypted with Password. 

 

I have tried this both with and without Restrict Editing settings on the template - it makes no difference.  I am always prompted for a password when opening a document created with the template, and always it accepts any password at all and opens the document.  Any idea what I am doing wrong? 

 

Thanks in advance for any help.

 

Stuart
Subscribe to: Posts (Atom)