Pages

Search

Win2k3 Server Setup - Microsoft Exchange

Win2k3 Server Setup - Microsoft Exchange


Win2k3 Server Setup

Posted: 17 Jun 2006 06:27 PM PDT


Hi........... First thing it is not necessary to install exchange on a
DC..................... You can install Exchange on member server but
be sure that u connect that member server to ur DC.................
Once u install exchange on member server you will get all the users
that were created on ur AD................ Be sure to run FOREST PREP
and DOMAIN PREP before you directly go for
installation....................

Migrating Imail Server to Exchange 2003

Posted: 17 Jun 2006 05:04 PM PDT

Thanks, John - I figured it might involve manually exporting/importing PST
files. I am not aware of any 3rd party tools that will aid in the
conversion, so I'll probably just document the current Imail setup and use
that to configure Exchange. I appreciate your help!

"John Oliver, Jr. [MVP]" wrote:
 

Exchange 5.5 holding message in queue

Posted: 16 Jun 2006 02:17 PM PDT

I appreciate the help. I turned on the logging and I'm in the process
of checking those event ID's and see where that leads me. Thanks again.

Mystery NDR's

Posted: 16 Jun 2006 09:38 AM PDT


Hi ...........
--> Enable message tracking
-->I suggest you to check QUEUES if there are any unsent
messages...........
-->Check for SMTP settings.............
--> Run netdiag and DC Diag to verify all the connections............

Do reply what was the outcome of all these steps

Palm Treo Versa Mail syncing only prior days mail

Posted: 16 Jun 2006 09:01 AM PDT

I would try a hard reset on the Treo 650 first.

--
John Oliver, Jr
MCSE, MCT, CCNA
Exchange MVP 2006
Microsoft Certified Partner
"Deborah" <microsoft.com> wrote in message
news:com... 


How to bypass Smart host relay in EX2K3 when delivering SMS to a mobile device.

Posted: 15 Jun 2006 02:44 PM PDT


"Mark Arnold [MVP]" <org> wrote in message
news:com... 

The legal disclaimer is not done by Exchange. We employ a
third party Spam filtering services. Our In/Out bound Internet
mail go through this services. Our In/Out-bound Internet
mail messages go through this service. Our ISA Server firewall
only accepts SMTP mail from this service and EX2K3 delivers
all Internet mail to this service via the Internet Mail Connector.

So to bypass our third party Spam filtering service, I have
to create a special connector for SMS.

It works now.


exchange 2003 offline backup

Posted: 15 Jun 2006 02:29 PM PDT

C'mon Andy. How many times have you seen a manager that used to run Exchange
5.0 hold on tight to those old methods/ideas?

"andy webb" <com.spamsucks.com> wrote in message
news:uLIJw$phx.gbl... 


Message queue exchange 2003

Posted: 15 Jun 2006 01:53 AM PDT

Thank you Mark.

Regards.

ZOLTAN

"Mark Arnold [MVP]" wrote:
 

Exchange 2003 with ISA 200 Not working...

Posted: 14 Jun 2006 11:44 PM PDT

Have you setup the exchange server as a securnat client?

"Mahmoud Metwally Ali" <com> wrote in message
news:phx.gbl... 


VPN & Outlook / Exchange 2003

Posted: 14 Jun 2006 10:18 AM PDT

I can ping the IP address just fine, if I try to ping the fqdn and it comes
back with check the name and try again. the error that comes up in outlook
is ... unable to open your default e-mail folders. You must connect to your
MS Exchange server computer with the current profile before you can
synchronize your folders with you roffline folder file.

I can access the server file share just fine and printers and so on.

Thanks for the help

Mell

"Nuevo" wrote:
 

mail-enable a contact

Posted: 14 Jun 2006 08:49 AM PDT



In news:com,
James <microsoft.com> typed: 

Check out
http://www.amazon.com/gp/product/0596007175/ref=ase_robichaassocia/102-4969433-1442512?s=books&v=glance&n=283155&tagActionCode=ro bichaassocia

....starring the lovely and talented Missy Koslosky, Exchange MVP, as one of
the authors.

 


Delivery is Delayed

Posted: 14 Jun 2006 07:16 AM PDT

This is a Small Business Server 2003 including Exchange 2003 with the latest
service pack. It is the only Exchange server. The domain is "glccpa.com".
And, yes, when I say group I mean a distribution group in Active Directory
consisting on internal LAN users only.

Thanks.
--
Harvey Levitt
Network Administrator


"Lanwench [MVP - Exchange]" wrote:
 

Automatically Forward Messages From a Specific Sender

Posted: 14 Jun 2006 05:16 AM PDT



In news:googlegroups.com,
com <com> typed: 

Only via an Outlook rule....per mailbox.


POP mail

Posted: 13 Jun 2006 03:04 PM PDT



In news:phx.gbl,
Ky IT Guy <com> typed: 

Nuevo gave you a good answer here...you're doing this in the wrong place.

However, if he's using a Treo 700w, and you have Exchange 2003, don't use
POP. Use ActiveSync so the mail is 'pushed' to his device, like a
Blackberry. This is *much* better....

http://www.msexchange.org/tutorials/Exchange-2003-Mobile-Messaging-Part1-Microsoft-DirectPush-technology.html
may help.


Having problems getting my mail

Posted: 13 Jun 2006 10:35 AM PDT

oh got it now, im such an idiot. was using avacado in the place of my power
cord. it all works now thanks 06
"Display name" <com> wrote in message
news:phx.gbl... 


isinteg question

Posted: 12 Jun 2006 12:27 PM PDT

Thanks. That's what I thought. When you run this command does the out put
go to a file somewhere or is what you see in the command window all you get?

Thanks again...

"Bharat Suneja [MVP]" <spam.org> wrote in message
news:phx.gbl... 


Public Folder Calendar as a Resource

Posted: 12 Jun 2006 10:11 AM PDT

Hello,

Thank you for posting.

First, thanks to Leif. I agree with Leif.

If you have any other questions, please feel free to contact us. Have a
good day.

Sincerely,
John Chen, MCSE, MCSA, MCDBA, MCSD
Microsoft Online Partner Support

Get Secure! - www.microsoft.com/security

================================================== ===
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
================================================== ===

This posting is provided "AS IS" with no warranties, and confers no rights.

How to start cluster from command line?

Posted: 12 Jun 2006 09:42 AM PDT

Cool, thanks!


Lamar


"John Fullbright [MVP]" <fjohn@donotspamnetappdotcom> wrote in message
news:%phx.gbl... 


Any issues with w2k3 sp1 on Exchange 2003?

Posted: 12 Jun 2006 08:59 AM PDT

Hey Nuevo,

No I didn't, but I found the fix and it worked for me. Here it is:

http://support.microsoft.com/kb/841561

See my other post under Lamar Thomas: "How to start cluster from command
line"

Thanks for your help!


Clayton


"Nuevo" <com> wrote in message
news:%phx.gbl... 


Exchange Sender ID Filtering

Posted: 12 Jun 2006 07:44 AM PDT

Thanks for that. I think I may have sorted it out...seems that for some
reason the Sender ID Filtering was blocking some internal mail. Go figure.

Thanks anyway.

"Leif Pedersen [MVP]" wrote:
 

Mailroot / BadMail Folder

Posted: 12 Jun 2006 06:47 AM PDT

Ok thanks for your help! Have a blessed day!
"Mark Arnold [MVP]" <org> wrote in message
news:com... 


Antigen

Posted: 09 Jun 2006 07:11 AM PDT

Not sure if this will help, but just as an fyi...we recently had a
problem with Antigen as well. It was making our public folders
temporarily disappear. It had been a year since the scan engine had an
update and you have to do it manually...I belive you also need a user
name and password to download the update. We had to open an incident
with Microsoft which I think cost around $400. We will be moving to
another Exchange AV solution soon.

Alex Tatham wrote: 

How can I tell if Exch. 2003 sp1 is installed?

Posted: 08 Jun 2006 11:26 AM PDT

Thanks guys, that was it!


Clayton



"Clayton Sutton" <com> wrote in message
news:uZZhg.46799$news.easynews.com... 


Exchange 2003 Default SMTP for user

Posted: 08 Jun 2006 11:17 AM PDT


"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Mark

thats the fix I needed. As ever my appreciation for the response.
Geoff


Microsoft Word - Bullet Numbering & Capitalisation

Microsoft Word - Bullet Numbering & Capitalisation


Bullet Numbering & Capitalisation

Posted: 25 Mar 2014 02:15 PM PDT

Hi Guys,

I've created a bullet list in word and the program highlights the first word to be capitalized.

How can  I stop Word, from doing that? i don't want to select "Ignore Once" to get rid of it because it just shows up again. I want a permanent fix please.

Thanks in advance.

Word Saddle Stitch How to add Page Numbers

Posted: 25 Mar 2014 02:14 PM PDT

I'm using Work 2010.  I'm saddle stitching.  I finally got it to add page numbers, but not the way I want it.

I don't want page numbers on the front page and I want it to start at page 1 on page 2.  Or maybe even just skip page numbers on the Cover Sheet.

word 2010 print 16x22 document

Posted: 25 Mar 2014 01:45 PM PDT

Word 2010-Can create 16 inch wide,22 inch high document. Need procedure to print it where it would be on 4 sheets of card stock to be taped together forming a 16x22 poster.      

Mail Merge Office 2010

Posted: 25 Mar 2014 12:42 PM PDT

I am running the mail merge wizard.  At the end when printing envelopes, the recipients addresses do not print on the envelope.  I am following step by step and cant figure out why its not printing.

Thanks in advance,

 Tammy

Word typeing lags

Posted: 25 Mar 2014 12:25 PM PDT

Recently Word decided to add 1 sec delay between keystroke and the character appear on screen. I type about 10 characters per second. By the end of a sentance I can go out a grab a coffeee berfore Word catches up.

I've remove and reinstalled office 8 times now.

what else can I try?

Microsoft Default internet browser settings

Posted: 25 Mar 2014 12:24 PM PDT

When I try to send a document via email I get a message saying my default browser settings have not been set.

How do I do this??.

 

I can't open older Word docs in 2013, the kind that are "fill in the form" files.

Posted: 25 Mar 2014 11:29 AM PDT

I have a new computer with Windows 8.1 and Word 13. I work for a company that has forms that I have to use that are fill in forms. They are older, and they open, but typing in them is a nightmare and it takes the letters in half/time speed. Any suggestions?

Carole 

2013 Normal.dotm Problems: After saving a macro autotext will not save to normal.dotm

Posted: 25 Mar 2014 11:22 AM PDT

Question I: Is there a way to save my macros in a different location than my quick parts autotexts. Currently they both save in Normal.dotm but when I save a macro on normal.dotm it won't let me add any new autotexts. I have tried saving autotexts as buildingblocks.dotx but then it will just save as a quickpart, and won't come up when I type the autotext name like my other autotexts.

Question II: Is there any other way to stop my Normal.dotm from corrupting so I can save autotexts and macros together?

Further Explanation

I am having issues with my Normal.dotm for Office 2013. I noticed it wasn't saving any of my new auto texts, so I figured my dotm was corrupted and changed the file to Normal.old.

A New Normal.dotm was created, and I added a bunch of quick parts. It saved them fine, until I input my macro. Since I saved my macro, it won't update any of my autotexts. When I restart office none of the autotexts are there, and when I look at the file in my templates folder, it will show the modified date from the last time I made a macro. It will update when I make a new macro.

My only macro

Sub TimeStamp()
Selection.InsertDateTime _
      DateTimeFormat:="MM/dd/yyyy hh:mm" & _
      " - ", InsertAsField:=False
End Sub

I can obviously start a new normal.dotm and put in all my current autotexts AGAIN before I input my macro - but then I am just going to have to do the same thing when I need to make a new autotext.

error 193-13

Posted: 25 Mar 2014 11:14 AM PDT

When I try to access Office 2013, which I paid for when I bought this computer; I receive the error message "Not compatible with this computer."

Attempting to run repair on  computer Programs and Features nets me the error code 193-13. What's up with this? It worked fine last week.

Alternating Page Numbering

Posted: 25 Mar 2014 10:58 AM PDT

I am having difficulty formatting page numbers in a court motion. I need "i, ii, iii. . . " and "1, 2, 3 . . . I need pages 1, 2, 3 and then i, ii, iii and then 1, 2, 3, 4, 5, ...

Help me please!

Annoying word windows

Posted: 25 Mar 2014 10:54 AM PDT

I am working on multiple word documents. I minimize all of them, and then when I maximize the one I want, all the others open behind it as well. I'm sure (well I think I'm sure) this is a default setting, but then to get back to my desktop I have to minimize all of the one at a time again. This also happens with excel. I can't figure out how to change this so only the window I want pops up! Thanks.

Adding text to a TOC changes the formatting of the text

Posted: 25 Mar 2014 10:20 AM PDT

I am using MS Word 2007. I want to add some text to the Table of Contents. When I go to the reference|table of contents|add text section and add the text I am asked which of 3 levels I want it to be within the table of contents.

When I answer that question the text that I have seected to be added to the TOC has its formatting changed.

I just want to add the text to the table of contents. I don't want any of the formatting in the rest of the document altered when I do this. Is there a setting I can adjust to stop this unwanted behaviour?

Corrupted files

Posted: 25 Mar 2014 10:12 AM PDT

There are two ways that I experience corrupted files.

1.  Files that are saved on my hard drive as a word or excel file, state they are corrupted when I try to open them up.

2.  I use yahoo.  If someone sends me a document, and I download it, then I press open to see what it says, it automatically states that its corrupted.

Now, this does not happen will all of my saved files on my hard drive or will all files I download from my yahoo account, but it happens consistently and then I need to hop on another computer.

I use a desktop.  Help...

Word 2010 macros keyboard shortcut not working

Posted: 25 Mar 2014 09:51 AM PDT

Hello, just wanted to see if someone could please advice. We have been using a letter document at work for many years using macros. See below.

We have a letter that goes out to different staff members with their name department etc. We have a list of 20 departments on another word document in a list format. I created a macro where by I copy first dept(in this case architecture) from the list and paste into the letter and give it a keyboard shortcut say Alt+1 under macro 1. I do the same for next dept (biology) from list, and give it alt+2 under macro2.

Now, when I run the shortcut alt+1 I get biology and alt+2 biology shows up again.  it seems architecture not showing. the macros worked fine before. :(

Format Consistency

Posted: 25 Mar 2014 09:30 AM PDT

I am using word 2010 & sometimes when I am working on documents, font size consistency will be off slightly (i.e. Arial 8 vs. Arial 8.5).  My eyes when reviewing a printout can catch, but they can miss other items.  Does word have a feature, which can help to catch those subtle differences?

Saving to and opening documents from SharePoint 2013

Posted: 25 Mar 2014 09:28 AM PDT

I was hoping that Office 2010 would work nicely together in terms of saving to and opening documents from SharePoint 2013. Alas, I was disappointed and somewhat surprised to see that opening/saving documents in SharePoint from within Office still involves copying, pasting and hacking the URL of the document library in the Save or Open dialogue box. I was fully expecting that Office 2010 would have display some sort of SharePoint navigation so you could view your sites and document libraries in a similar way to folders. A mature document management system this ain't!

Anyone have any advice on how to improve the Open/Save to/from SharePoint experience in Office 2010? I'm open to the idea of Office add-ins whether third party or official Microsoft.

opening docs in Office 360

Posted: 25 Mar 2014 09:22 AM PDT

Can't open encrypted documents on my mobile app.

Microsoft Office Clipart Doesn't Work Anymore?!

Posted: 25 Mar 2014 09:19 AM PDT

What ever happened to Office Clipart?

All online clipart is unavailable, both if inserting using an Office program, or by accessing it on the web: http://office.microsoft.com/en-us/images/

I feel like I'm dreaming, I can't believe such a big glitch is actually happening, and is ongoing for many weeks already!!

Am I dreaming? Does Online Office clipart work for you?

my microsoft word 2013 is not starting up at all

Posted: 25 Mar 2014 09:18 AM PDT

up until now my word has been working normally but after my last windows update it has not started up at all not even in safe mode which i have tried several times

IN WORD 2013 IHAVE 65 ROWS FOR MY WORK.HOW I INSERT DATE AND MONTH CONTINOUSLY IN65 ROWS?

Posted: 25 Mar 2014 09:14 AM PDT

Dear friends

In my office 2013 word i have 65 rows for my work.I need date and month continuously. How I do this?

Cannot edit text form fields after merge

Posted: 25 Mar 2014 08:46 AM PDT

Hi

I've got a strange problem where I need to insert a cover sheet into an existing document. The cover sheet contains text form fields that allow for electronic archiving and searching of the main document, and was originally saved in Word 1997 - 2003 format. It saves in Word 2013 format and works just fine. When I use

Insert, Object, Text from file

to put this into the main document however the form fields then become un-editable and just disappear when I try to put text into them.

Is there a fix for this?

Thanks

Paul.

Word 2013/ Office 365 Professional (32 bit)

Windows 7 Professional (64 bit)

Microsoft Word Spelling and Grammar Check

Posted: 25 Mar 2014 08:37 AM PDT

You know what would be a really helpful feature for Microsoft Word?  If Spelling/Grammar errors as flagged by the checkers were inserted into the document as comments.  As a teacher, this would supplement my own commenting on student papers, and actually accellerate the grading process.  Perhaps a macro of some sort could address this question. 

MS WORD 2003 FORMS LINKED TO EXCEL 2003

Posted: 25 Mar 2014 08:16 AM PDT

I have managed to create a Word form that pushes data into an excel spreadsheet. 

However I now want to be greedy and assign a Unique Serial number to the form that will increment each time a user uses the form.

The purpose of the form is for Users to request data to be transferred between systems (a task only administrators are permitted to do).

The user would use the form, stored on a server share, and submit it to the admin team requesting this task.

The form once completed by the user updates the spreadheet which acts as a 'LOG' of the requests.

A unique serial number would be useful for the admin team to track each request.

Is it possible for a unique serial number to be generated in a word form that can be pushed to excel with the requested job and then increments the next time it is used?

Any advice greatfully appreciated.

Mark

Design tab in word not looking right

Posted: 25 Mar 2014 08:13 AM PDT

can anybody tell me how i can get the templates OFF THE TAB please, i need to see the other commands in that tab. its JUST no looking right

its taking up the whole tab wtf

i attach a screenshot

thanks :)

Outlook template date auto update next to the Next Friday's date

Posted: 25 Mar 2014 08:06 AM PDT

I have a email that I send to my clients when I move them from Advance support to General support. I send this template email out on Mondays for that Friday to be the last day of my time with them. I am looking for a way to auto update to the next Friday based on today's date. So if I sent one today 3/25/2014, it would be like this Friday March 28, 2014 in the body of the text. I have tried a few things with excel and import but its doesnt seem to update. I am fairly new to the macros and VBA I can get it to work in excel but not sure how to get that to work in Outlook if I can at all. Thank you for your time and help with this.

Find/Replace of Paragraph marks doesn't work when pasting from Notepad, but does when from here

Posted: 25 Mar 2014 08:02 AM PDT

I have a text file consisting of data I exported from a PDF document. It is only a text file. In Notepad, it doesn't show any line breaks, but in Textpad is does. I pasted it from Notepad or Textpad into Word and it shows a number of line breaks. When I view formatting character, I can see the paragraph marks at the end of each line. I did a Fine/Replace to change these Paragraph Marks to spaces. However, only a few change, not all of them. I've tried using Line Breaks or Paragraph characters, but they are not being recognized. Then I tried copying that text here, in this box to show a sample. Then I copied back to Word. Then my Find/Replace with paragraph marks worked fine. What's the issue here? Why are the Paragraph marks not being recognized in Find/Replace when pasting from Notepad or Textpad, but recognized from here, and what can I do?

Vulnerability in Microsoft Word could allow remote code execution

Posted: 25 Mar 2014 05:40 AM PDT

Microsoft has released a Fixit as a temporary workaround to address a vulnerability in several versions of Word and Word Viewer discovered March 24, 2014.

Apply the Fixit using Internet Explorer here: https://support.microsoft.com/kb/2953095

Versions of Word affected by this vulnerability can be seen in the following screenshot.

why does word 2010 not save a version of a file you forgot to save?

Posted: 25 Mar 2014 05:18 AM PDT

According to all the blurb, if you have "Keep last autosave version if you close without saving" checked, you should be able to restore the file, but it doesn't work - there is no such file stored where autosave is set to store them or anywhere else as far as I can see. There is also nothing in Info/Versions/ Recover Unsaved documents. I have doe a Repair, with no improvement. Any ideas?

In passing, is there no option in Win 8.1 to search for files created, for example, today?.

My Microsoft 2010 files in word and excell will now not open.

Posted: 25 Mar 2014 04:40 AM PDT

The message is Error, The operatiing system is not presently configured to run this application. Can anybody help Regards

Add Assistant to Org Chart

Posted: 25 Mar 2014 04:10 AM PDT

Is there a keyboard shortcut to add an assistant to an organisation chart?

In Word 2007, Insert > SmartArt > Hierarchy > Organisation Chart.

I'm typing in the Text Pane. I already use Enter, Shift+Enter, Tab & Shift+Tab to add text at the appropriate levels, but it appears I have to use the mouse to add an Assistant. I've nothing against the mouse, you understand, but for this kind of work I prefer to keep my hands on the keyboard.

Privacy

Posted: 25 Mar 2014 03:24 AM PDT

My computer runs Windows 7 Service pack 1 and I use Office 365 premium for Home. I want to know how to label a file so that I am the only one who can open it.

***Moved to *Office Topic: Microsoft Office Word* from *Microsoft Office Access* the database software

MS Word - Interesting Heading Problem

Posted: 25 Mar 2014 03:03 AM PDT

I have an interesting question for the MS word experts.

Presently, I am having 2 headings.

Heading 1 and Heading 2

In heading 2 style I am using, page break before option. So you know, all the heading 2 will start from a new page.

 However, I want the first instance of Heading 2 (that is coming under Heading 1) to be int he same page, all other instance in the new page.

Any possibilities?

Changing default PDF Viewer

Posted: 25 Mar 2014 02:53 AM PDT

When I save a document as a PDF using the export option, it always opens up the pdf using the Word Online viewer. This wasn't originally the case. How do I change it so that it by default opens up in my system viewer like Foxit or Adobe Reader instead?

(updates)

When I open the pdf from Explorer, the pdfs open in my default viewer. This only seems to occur if I view the pdf immediately upon exporting a PDF using the PDF creator. If I print the PDF using a PDF converter, the problem doesn't arise.

word not responding, but only happens about a minute after opening a document and resolves itself a minute later

Posted: 25 Mar 2014 02:37 AM PDT

Hi

When I open Microsoft word all seems fine.  I then open a document and go to click into it but nothing seems to happen.  Then I get the egg timer thing and the message "not responding".  This lasts for about a minute and then clears and after that all is well.  ok I can live with it but it's very irritating.  All my addins are disabled as far as I can see and I have changed the printer but it still happens.  However safe mode seems ok but I can't think of what else to try.  Any help greatly appreciated.

Gillian

Microsoft word 2013 files wont open.

Posted: 25 Mar 2014 01:20 AM PDT

For the last two days every time i try to open a word file i get an error report

We're sorry, but word has run into an error preventing it from working correctly. Word will need to be closed as a result.

Would you like us to repair now?

But when i click on the repair button nothing happens, i tried to open word in safe mode an minute ago and the same message came up? Don't know how to fix it, any help gratefully received. 

Can't save word or Excel files to my computre

Posted: 25 Mar 2014 12:57 AM PDT

Recently downloaded Office home premium 365.  When I go file/save as/ up come the screen with option to save to documents and or browse..When I click on these they do a little jig but freeze and do not progress.  Windows 8.

Disabling Formatting Consistency Checker has no effect whatsoever

Posted: 24 Mar 2014 10:11 PM PDT

Does anyone have any suggestions as to how I would prevent Word never to use the blue underline again?

(The checkbox shown is the one in Word Options/ under the header Editing Options)

Cheers,

Kevin

EDIT: Solved. It seems like this article is quite misleading http://support.microsoft.com/kb/284956/en-au

The blue wavy line DOES NOT indicate that the Format Consistency Checker is active.

It indicates that capitalisation is the issue.


We're sorry, but Word has run into an error that is preventing it from working correctly. Word will need to be closed as a result. Would you like us to repair now?

Posted: 24 Mar 2014 10:02 PM PDT

Hi, we bought Outlook and Word 2013 last October and it has been working fine.  (Order Number 11778001541)

Today, my Word 2013 seems to have been deleted, although Outlook is working no problems and we cannot find it anywhere.

Does anyone have any idea where it may be?  We have followed the different instructions for reinstating it.  I don't think we can reinstall it as it was bought online and we have no physical disk.

Please help as I need this for work and am very worried that I have lost all my files - no, I didn't back them up on hard drive.

Thanks

Linda

Word 2007 Document with Fillable Fields Not Working in Word for Mac

Posted: 24 Mar 2014 09:48 PM PDT

Hi all,

I've created a fillable form on my PC with Word 2007 that has dropdown menus and also fields in which to enter text. The Word 2007 document that I have created works fine on a PC with Word, but it's not working on a Mac version of Word. In the Mac version, we're not able to access the dropdown menus fillable fields, for example.

I'd like to be able to send this Word document to others to see why it's not working on a Mac. Anybody out there able to help out so we can get this form working on Mac versions of Word?

Thanks very much.

Jason

Line Numbers

Posted: 24 Mar 2014 08:49 PM PDT

How do I uncheck "suppress line numbers" if the checked box is locked?

Microsoft CRM - Advanced find

Microsoft CRM - Advanced find


Advanced find

Posted: 22 Nov 2004 12:53 PM PST

Hi Sylvie,

Thanks. That will at least cut my time in half!

Tim
"Sylvie" <microsoft.com> wrote in message
news:com... 
data, 
change 
have 


Cannot go offline with SFO, any suggestions?

Posted: 22 Nov 2004 12:17 PM PST

Hey Brent,

I reviewed www.c360.com, your right that was really great information. The
user I was logged into the box as in fact was a member of the local admins
And domain admin And also a CRM user. I looked into the Domain users thing
and I have added this group to the sql logins and granted access to the CRM
and Meta DBs but no success. The install auto creates a SQLAccessGroup which
all my CRM users are a member of.. I think this takes care of DBs access, I
think.. I changed the interactive logon in the Local Securtiy Policy to cache
0 logins (o meaning None). I dont know whats going on.. it seems like I have
gone through everything.. I have read many newsgroups with this error and I
thought my issue was a known issue, but I think it is just a bug in the
install.. I was hoping not to have to re-install (the server is live
production DC, DNS, SQL, Exchange, and Everything else). I am real close in
reading up on backing up the databases (cause IE connects just fine) and
reinstalling the CRM implementation. Dont know if I will arrive in the same
place with completely removing the system.. read some nightmares about that..
I am hoping someone reaches out and helps me thru all this..

"Brent Bassett" wrote:
 

CRM 2.0 Fixes and Enhancements

Posted: 22 Nov 2004 11:55 AM PST

Mike,

Some answers below based on currentl plans that I've heard.....

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Mon, 22 Nov 2004 11:55:05 -0800, "Mike Price" <Mike
microsoft.com> wrote:

Will the following issues be addressed in CRM 2.0?

- CRM Mail Router compatibility with an Exchange 2003 cluster. We are going
to deploy a Microsoft Exchange 2003 cluster in a couple weeks and my
understanding is that the crm mail router isn't compatible with a clustered
Exchange environment. 


- The need for the GUID in the subject line. Not only does the GUID look
unprofessional but we are afraid that some of our emails are being filtered
by spam filtering software on the mail servers of our customers. 

- Duplicate email activity records. Everytime a user creates an email
activity that includes the email address of another CRM user CRM creates a
duplicate record. This behavior is unsatisfactory. 

- CRM for Outlook doesn't allow you to go offline after you have
disconnected from the network. Sometimes our sales staff leave themselves
online in CRM for Outlook but disconnect from the network. If this happens
there should be no reason why they cannot go offline. I understand that they
would not be able to syncronize with CRM if they are not connected to the
network but that should still have the ability to work with their local copy
of CRM even if it is out of date. 

- Security Role permission inheritance. When making changes to a security
role often times the changes don't filter through to all of the business
units which means I have to go through all of the business units to make sure
the changes have filtered down and if not then I have to make the changes for
those business units. This is not a huge deal but since it was designed to
allow you to make at the partent business unit it should work. 

Well that's my rant. Does anyone else have comments on these?



How can I link to a lead??

Posted: 22 Nov 2004 06:14 AM PST


I used this very often in the past and had no problem with it!!

Sorry!


--
Christian

com
www.mscrm-addons.com
Your company for MS-CRM ADD-ONS!

"Lutz" <de> schrieb im Newsbeitrag
news:853701c4d0a5$f83c7730$gbl... 


How I can Get MS CRM SDK trial version

Posted: 22 Nov 2004 01:33 AM PST

The CRM software is available via MSDN Universal subcriptions.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Mon, 22 Nov 2004 13:03:09 +0330, Emad Rangchi <com>
wrote:

Hello I am a .Net developer , Iwant to try on CRM in MS platform , How I
can get the trial version of CRM SDK
Regards
Emad Rangchi

US to UK CRM link

Posted: 22 Nov 2004 01:25 AM PST

You will find that with SBS your options are a little limited as you will not be
able to setup remote connectivety between the sites that takes advantage of a
trust between the Domains.

If they truly need the sites to "integrate", that could take some effort and
cost. Especialyl since to replicate users between the 2 installs would require
double licenses. Otherwise, you lose ownership information on the objects.

There just aren't any "good" solutions to this at this point with CRM 1.x.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Mon, 22 Nov 2004 01:25:03 -0800, "PeteC" <microsoft.com>
wrote:

Hi,

A potential client has a scenario whereby they want a UK installation of CRM
on SBS but they also want the US site to integrate into it. What would you
recommend - a server on each site, a hosted service or one server with a fast
link between the two. Any experience of this out there ??

SQL Maintenace Plan

Posted: 21 Nov 2004 02:53 PM PST

Thanks, Matt! I think that's the clearest explanantion I've read about this.
Appreciate your help.

"Matt Parks" wrote:
 

how can I make sales action viewable only for salesman who create

Posted: 21 Nov 2004 05:12 AM PST

Go TO
1) HOME-> SETTINGS-> BU Settings-> Security Roles
2) Choose the Role you want to change!
3) Go TO Core-Tab and Click the ReadPrivilege of Aktivities


--
Christian

com
www.mscrm-addons.com
Your company for MS-CRM ADD-ONS!

"scorpio" <microsoft.com> schrieb im Newsbeitrag
news:com... 
basic 
..... 


Customer Report Under Outlook Client

Posted: 19 Nov 2004 01:10 PM PST

Stephen,

I figured that was the case. Thanks for the help.

Tim

"Stephen Redmond" <nospam> wrote in message
news:phx.gbl... 
of 
they 


How do you import Outlook Contacts into CRM Contacts?

Posted: 19 Nov 2004 12:43 PM PST

If you already have them in Outlook, you can mograte them into CRM using the SFO
client directly from Outlook. Biggest drawback to this approach though is that
it will not populate Accounts.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 19 Nov 2004 12:43:06 -0800, "Bravefacari"
<microsoft.com> wrote:

I have scanned business cards in with a cardscan to Outlook 2003. Now I need
to migrate them over to CRM Contacts. The csv is very clumsy and doesn't
even have all the field choices needed in the drop down window. Is there a
way? Thanks.

Postal Codes

Posted: 19 Nov 2004 07:46 AM PST

Tim,
Just update the first 5 numbers of the zip code in to the New field.
As long as you does not wnat the Zip+4 to be included in your search, this
works. Anb by the by i guess no one will try to search giving the Zip+4 in
the search. So in the Workflw make sure that you remove the what ever is is
there after first 5 numbers in the zip field before you update it.

Regards
Vijay

"Tim VonDerHaar" wrote:
 

CRM user information synchronized with AD??

Posted: 18 Nov 2004 06:16 AM PST

There is no "supplied" integration that I am aware of. In order to accomplish
this, you would need to write something yourself via the SDK.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 18 Nov 2004 09:16:26 -0500, "Chris"
<nospamchurleynospamatsecurespeeddotccnospam> wrote:

Hi,
Is there anyway to synchronize CRM User information with Active Directory??
This would make re-orgs, promotions and the such so much easier.

Regards,
Chris