Pages

Search

Microsoft Word - Line Numbering in footnotes

Microsoft Word - Line Numbering in footnotes

Line Numbering in footnotes

Posted: 11 Nov 2014 02:55 PM PST

I am working on a document that HAS to have line numbering.  I need the line numbering to continue within my footnotes.  Everything that I have found says that Word just doesn't line number in footnotes.  I can do it in WordPerfect so I know there has to be some way, whether macro or whatever that will do this for me.  I am using Word 2007 but have access to Word 2010 if needed.  Anyone?

Word 2013 highlighting English/Australian spellings (e.g. ~ise) as incorrectly spelt

Posted: 11 Nov 2014 01:34 PM PST

Hi,

My language is set to English <Australia> but word 2013 is highlighting words like, 'colonise', 'apologise'  as incorrectly spelt and offering 'colonize', 'apologize' as a correct alternatives.

For the record, the Macquarie dictionary and Australian Government writing guides state that colonise, apologise and so on, are the correct spellings.

How do I get Word 2013 to work properly.

I have noticed this question has been asked a few times by other people and little solutions offered, mainly because the "MVP" who attends (Doug Robbins) seems more concerned with hijacking the discussion with convoluted advice and ridiculous assertions (that ~ize is the correct spelling).

So please Doug Robbins "MVP", stay away; I am not interested in what you have to say about the English language.

Can someone who knows what they are talking about please address this question?

Cheers,

Office 2013 Word & Excel Crashing (Windows 7 Professional, 32 bit)

Posted: 11 Nov 2014 11:48 AM PST

Hi all,

Both Excel and Word are crashing repeatedly on multiple Dell desktops running the 32 bit version of Windows 7 Professional. The freezing/crashing occurs when scrolling, printing, saving, opening and more. We have an HP LaserJet P2015dn with the PCL6 driver. Crashing still occurs in Safe Mode in both programs.

I have tried the following solutions and they did not work: 

1. Word data registry subkey edit

2. Repair Word

3. Uninstall and Reinstall Word 

4. There were no add-ins of any kind to disable

5. Not an NVIDIA driver issue

6. Anti-virus (Kaspersky 6.0) is up to date and not interfering

7. Excel and Word are not being used by another process

8. Files are not generated by a third party

Any ideas?

MS Word Crashes MS Word has stopped working

Posted: 11 Nov 2014 11:39 AM PST

When I try to open MS Word it crashes and "Check on line for a solution" or "close the program"

These are the details:

Problem Event Name:    APPCRASH
  Application Name:    WINWORD.EXE
  Application Version:    14.0.4762.1000
  Application Timestamp:    4bae25b7
  Fault Module Name:    UNIDRVUI.DLL
  Fault Module Version:    0.3.7601.17514
  Fault Module Timestamp:    4ce7b8f7
  Exception Code:    c0000005
  Exception Offset:    00038cc5
  OS Version:    6.1.7601.2.1.0.256.48
  Locale ID:    1033

Additional information about the problem:
  LCID:    1033
  skulcid:    1033

How can I fix this?

Expired?????

Posted: 11 Nov 2014 11:00 AM PST

I've had Microsoft Office/Word on this Lap Top since I purchased it in 2012.  All of a sudden it's expired!!!  How do I get my documents out???  They are too important and I refuse to spend $$$ to purchase this program.  I might as well get a new lap top!  Any ideas?  I have a Key Product Code, but apparently it is too old to accept it!   HELP!!!!

References displayed incorrectly

Posted: 11 Nov 2014 09:50 AM PST

When trying to cite a source in a document instead of the normal: " (Author, date, page) displayed according to APA standards. I get this:

"{ CITATION RAN01\I 1033}"

This along with my header/footer and bibliography being displayed completely incorrect is frustrating to say the least.

I've been taking classes for almost a year and utilizing Word 2013 on a daily basis to write and cite papers. Literally overnight it went from working fine to displaying every paper I've ever written with this text in place of my citations/header/bibliography.

I do not dig into my settings on word at all and have experience with computers as I've been building them since I was twelve. I assumed there was a setting option I could find but it has eluded me.

Anyone that is able to help would be greatly appreciated.

Office 365 Uni wont open my docs

Posted: 11 Nov 2014 09:20 AM PST

Why does this worsened version of office want to save my (already saved) docs every time I double click on any one of them (icon) when ALL I WANT is to open them?????

Why, oh why does microsoft drive me nuts?
Why do I feel like Neil from "The Young Ones"?

Out, damned spot - blue dots appearing in Visio flowchart embedded in Word doc

Posted: 11 Nov 2014 08:33 AM PST

I have a Word 2010 document with a flowchart embedded in it. The flowchart was created in Visio. I embedded it into the Word doc by dragging and dropping the Visio .vsdx file from its containing folder onto the page of the Word document (I've never embedded a different file type within a Word doc before and wasn't sure how to do it, so I just tried it this way for lack of any better ideas!). Seemed to look OK on the screen. But when I print the page of the Word document, the printout has blue dots around the flowchart boxes and the text in the flowchart boxes.

What's happening?

How do I get rid of these dots or spots?

Like Lady MacBeth, I just want rid of these damned spots!

How do I get rid of this monkey business?

Posted: 11 Nov 2014 08:01 AM PST

 

Just typing in Word and suddenly this goofy stuff started happening…………..dots between words and this little dingus.

How do I make this squirrely mess go away?

What formats are editable?

Posted: 11 Nov 2014 08:00 AM PST

Have Word 2010 with a document that is not allowing edit.(Even after removing the protect and read-only attributes). Compatibility mode.

Wanted to save in another format, then reopen.

In the save/dropdown, there are a dozen choices.

Which one to use?

Thanks!

Word IF Statement - IF {MERGEFIELD} = "Content" & "Content2" Then show result

Posted: 11 Nov 2014 03:36 AM PST

Hi

I was wondering if it was possible to set two variables in the IF statement, I currently have the following

{IF {MERGEFIELD LMCLCNReference} = "PF*" "" ""}{IF {MERGEFIELD LMCLCNReference} <> "PF*" " VAT Reg. No: " ""}{IF {MERGEFIELD LMCLCategory1} = "ABC" "0123456789" ""}{IF {MERGEFIELD LMCLCategory1} = "****" "9876543210" ""}

Now this correctly only shows the VAT Reg. No. if the LMCLCNReference doesnt start with PF, however it still shows the LMCLCategory1.

I was hoping to alter {IF {MERGEFIELD LMCLCategory1} = "ABC" "0123456789" ""} so that it basically says if ABC and LMCLCNReference <> "PF*" then show "0123456789"

Hope that makes sense, can't seem to find anywhere to include two variables before showing the outcome.

Any help/advice appreciated.

Cheers

Word won't open

Posted: 11 Nov 2014 02:29 AM PST

Hi

I have downloaded Microsoft Office Home and Student. Powerpoint and Excel opens ok but not Word. I get a dialogue box stating that Word has run into an error which has prevented it from opening properly and needs to be closed as a result. I have a new computer running Windows 8.1. I am quite computer illiterate so straightforward easy to follow instructions would be greatly appreciated.

Many Thanks

Document sending me on a save loop, change the title and it saves successfully

Posted: 10 Nov 2014 09:14 PM PST

Hi All,

I just came across something that stuck out as really bizarre. 

While working on a document (titled for example: Work document) one of my managers wasn't able to save it at all, the save and save as functions appeared to not work one bit. I copied all of the information in to a new document and saved that titled as Work document2, once this second copy was established i deleted the first document and removed the 2 from the title of the copy.

Suddenly the document was unsavable again. Just to test it i put the 2 back in to the title as it was originally saved and it worked perfectly fine, does anybody know what could be causing this? It is the first time i have ever seen it and the other documents i've been working on at the same time were all fine.

Any help is appreciated.

Nick

Insert handwritten signature into Word document

Posted: 10 Nov 2014 05:59 PM PST

I wrote my signature on a piece of paper. I used my HP All in One to scan it into Adobe Acrobat and then saved that as a .jpg file.

I then inserted that into a Word document but it takes up too much space and if I shrink the box around the signature, it also shrinks the signature.

Is there something else I can try? Maybe save the file as another file type?

I'd like to have my signature take up only the amount of space that a line of typed text would.

I've used the "scribble" option on the "shapes" button but it's kind of messy looking.

Any ideas?

Columns in Word 2010

Posted: 10 Nov 2014 05:19 PM PST

A dumb question but I am entering text in three columns in my document, the information in each column is a different category and needs to be separate. Currently typing in one flows to the next when the column is full. How do I keep them as separate? thanks 

Is a Word document saved to your computer or to the cloud when you save it in Office 365?

Posted: 10 Nov 2014 04:31 PM PST

I recently purchased a new laptop.  You can only get Windows 8 now.  The computer guy at Best Buy sold me a copy of Word 365,  Now I am hearing from the tech guy at our work that I could still load Office 2010 on a Windows 8 machine.  He has done that himslef.  He said he stayed away from 365 because so much of it is cloud based.  I want immediate access to my files on my computer.  I do not want to have to be logged into the internet in order to use Word 365 and access old files.  How does Office 365 Word work?  I am having a hard time finding any info on a Microsoft site.

Where is the Office button?

Posted: 10 Nov 2014 03:39 PM PST

Split from this thread.

Where is the Office button to click? I didn't see on any of the Word tabs.

Outline View: Degraded manipulation of heading hierarchy in *.docx vs. *.doc

Posted: 10 Nov 2014 03:37 PM PST

If the file is saved as *.doc, I can highlight entire swaths of heading paragraphs of various levels and use Tab or Shift-Tab to promote/demote the outline leve.  If I save as *.docx, all of this capability disappears.  In other words, manipulation of sub-trees in the hierarchy is a sinch in *.doc, but almost non-existent in *.docx.  Am I missing something?  Hopefully, we're not regressing in terms of capability.

Mail Merge Windows 8 - not working right

Posted: 10 Nov 2014 02:16 PM PST

I am trying to do mail labels using the mail merge feature in windows 8.1.  I am taking the data from excel.  I use the mail merge wizard, but only the first three address will transfer???????  I've tried many different things to see why the entire file won't convert over to word labels.  Any ideas????

Reinstalling office 2003 from a downloaded copy - Microsoft Office forums

Reinstalling office 2003 from a downloaded copy - Microsoft Office forums

Reinstalling office 2003 from a downloaded copy

Posted: 26 Nov 2007 06:27 PM PST

You can't. 2003 is a done deal.

--
JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"Cory C" <microsoft.com> wrote in message
news:com... 

Installing Office 2007 Home & Student on a 2nd PC

Posted: 26 Nov 2007 02:04 PM PST

Where did you get this version of Home and Student (retail store or with a
computer)? If it is a retail version it should install onto three different
computers. Look at the packaging (back near the bottom of the unusual
shaped, difficult to open, until you learn the tricks, case) that the CD
came in and it will tell you how many computers it will install in. Also
the 3 install version has part number X12-09054-01 as one of the last lines
on the back of the package.


"Tani" <microsoft.com> wrote in message
news:com... 

Getting rid of the annoying Fluent interface

Posted: 26 Nov 2007 08:51 AM PST

Hi Jens,

To add to JoAnn's reply, you can reduce the ribbon height by double clicking the active tab or using Ctrl+F1. The MS doentation
on their decisions for the ribbon and its current configuration are available through
http://blogs.msdn.com/jensenh


========
<<"Jens" <dk> wrote in message news:googlegroups.com...
My first though after seeing the new "Fluent" interface in office 2007
is how i can turn it of. Af which point did drop-down menus become
unfasionable? Why do i need to the the options all the time? It takes
up valuable screen real-estate, especially on a wide-screen laptop
display. Please tell me there is a way to get office 2007 back to
"classic" mode.>>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2007 Setup Successful - but Office won't run

Posted: 26 Nov 2007 05:56 AM PST

Hi Ian,

** collect information**

1. collect the Event Log with the steps below:
---------------------
a. Click "Start", click "Run", input "eventvwr" (without quotation marks) and press Enter.
b. Right click on "Application" on the left frame, choose "Save Log file As", navigate to the Desktop, input "app" in the "File name" blank,
and then click save.
c. Right click on "System", with the same method, save it as "sys".
d. Locate the two saved log files on the Desktop and send them to me at com.

2. Send the Office 2007 setup log file to me at com for further research.
------------------------------
a. Click Start menu-> Run, type "%Temp%" (without the quotation marks) in the Open box and press Enter.
b. Find the file "Microsoft Office 2007 SetupExe(****).log" in the folder. **** means the number.
c. Send this file as an attachment to me.

** Suggestion **

Based on my experience, this issue is mostly caused that there is problem with the Office 2007 registration/activation on the computer.
Follow the steps below to see if it works.

Step 1: Install the latest version of Windows Installer
===============
Download and install the latest version of the Windows Installer (Instmsiw.exe) from the following link.
http://www.microsoft.com/downloads/details.aspx?FamilyID=889482FC-5F56-4A38-B838-DE776FD4138C&displaylang=en

Step 2: Go to Control Panel > Add or Remove Programs to uninstall Office 2007

Step 3: Come into Windows Clean Boot Mode to reinstall Office 2007
=================================
It will disable all third party software from loading at startup so that we can narrow down if the issue is related to the third party
software.

1. Click Start menu-> Run, type "msconfig" (without the quotation marks) in the Open box and press Enter.
2. On the General tab, choose Selective Startup; click to clear the "Process System.ini File", "Process WIn.ini File", "Load System
Services" and "Load Startup Items" check boxes. You cannot clear the "Use Original Boot.ini" radio button.
Note: You can click the Normal Startup radio button to return to the normal Windows Startup after the test.

3. Click the "Services" tab. Check "Hide all microsoft services", click disable all. If the "disable all" is not available, please just skip it.
4. Click the "Startup" tab, click "disable all". If the "disable all" is not available, please just skip it.

5. Click OK.
6. Restart the computer. Install Office 2007.

Try to run Word 2007 again. What is the result?

In case that the issue persists, go to the folder C:\Doents and Settings\All Users\Application Data\Microsoft\Office\Data\, delete
the file Opa12.dat. Restart Office 2007. What is the result?

Related KB article:

838687 You receive an error message when you install an Office program or open an Office program or doent
http://support.microsoft.com/default.aspx?scid=kb;EN-US;838687

If anything is unclear or if you have any other concerns, please don't hesitate to contact me.

Regards,

Emily Lin

Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security
================================================== ==
When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from your issue.
================================================== ==
This posting is provided "AS IS" with no warranties, and confers no rights.


-------------------- 
responsible for this version at the company from where you purchased this edition from 

Loading Office 2007 on a 2nd PC

Posted: 24 Nov 2007 02:49 PM PST

JoAnn - It appears that the problem was with my disk drive. I tried loading
it using an external disk drive and it worked! Thank you so much for youor
assistance.

Angelo

"Angelo" wrote:
 

Office application version does not match

Posted: 23 Nov 2007 06:51 AM PST

With regard outlook I would suggest creating a new profile.

There are a number of MS kb articles regarding this err.msg, they all point
to the msg in 2007 and business contact manager.
Presumably the uninstall of Office 2007 removed the Office12 folder?
You might try this:
1.As an administrator, start each 2003 Office program in which the err is
received. To do this, follow these steps: a. In Windows Explorer, locate
the executable (.exe) file for the 2003 Office program.
b. Right-click the .exe file, and then click Run as administrator.
c. If you receive the User Account Control dialog box, click
Continue.
2.Click OK when you receive the error message.


"EarthLakota" <microsoft.com> wrote in message
news:com... 

Office 2007 deployment made complicated. Why?

Posted: 21 Nov 2007 08:44 PM PST

On Nov 26, 9:23 am, Ian Robert <postalias> wrote: 

Rob,
If you are having troubles then I see that I am completely ed.
Upgraded office to 2007 and Excel locks up within minutes. Getting
"Data file couldn't be closed..." error in Outlook and so on. Having
issues now with ADOBE too not present prior to the upgrade...have pro
version 8.1.1.
I'm a one-man-show, no IT department and can't afford the IT
consulting services of the variety you apparently offer. So now I
uninstall and go back? I've lost now 7 days of productivity and while
MS doesn't care about that it really hurts me.

Best of luck and hope you can flush out answers.

Dave

Office 2007 Pro Crashing Problems

Posted: 21 Nov 2007 12:51 PM PST

Thanks, G n' O. I'm running Acrobat 8.1.1, but it too has some problems with
pdfmaker files. the ms support website is, once again, useless for
non-programmers and also fails to deal with office 2007 issues. The point is
that these problems are all new to the upgraded MS Office. Neither Acrobat
nor MathType caused any problems in the Office 2003 versions. Additionally,
MS Office 2007 seems to be loaded with a host of other problems. So, despite
all the legal disclaimers ("weasel words"), Microsoft has seriously fallen
down with this new release.

Boot problems

Posted: 21 Nov 2007 06:21 AM PST

You need a win2k cd
http://support.microsoft.com/kb/124550

"cat3600" <microsoft.com> wrote in message
news:com... 

Office12 setup fails in VPC2007

Posted: 21 Nov 2007 06:20 AM PST

Hi Eric,

thank you - I found an other logfile that gives much better details (german
version):
Fehler 1933. Einige geschützte Windows-Dateien konnten nicht aktualisiert
werden. SFP-Fehler: 3. Liste der geschützten
Dateien:\r\nc:\programme\gemeinsame dateien\microsoft shared\web server
extensions\40\bin\fp4autl.dll

I copied that file from the office installation souce to the bin directory
by hand, restarted setup again and it worked fine.

Thank you!



--
Thanks for helping + replying! Matthias


"Eric Ashton" wrote:
 

GPO to redirect Outlook "AutoArchive" location

Posted: 19 Nov 2007 01:15 PM PST

Hi Bob,

Please take your time. I'm looking forward to your feedback. If you have
any questions while doing the steps, please feel free to post back.

Have a nice day!

Sincerely,
Robert Zhao
Microsoft Online Support
Microsoft Global Technical Support Center

Get Secure! - www.microsoft.com/security
================================================== ===
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ===
This posting is provided "AS IS" with no warranties, and confers no rights.

GPO problem changing OST path in Outlook 2003

Posted: 19 Nov 2007 01:14 PM PST

Hi Bob,

From your feedback and additional information, I know you have understood
the cause and got the problem fixed. I believe it will benefit many other
customers browsing the newsgroup with the same problem.

If you have any other questions, feel free to post back. I'll try my best
to help. :-)

Have a nice day!

Sincerely,
Robert Zhao
Microsoft Online Support
Microsoft Global Technical Support Center

Get Secure! - www.microsoft.com/security
================================================== ===
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ===
This posting is provided "AS IS" with no warranties, and confers no rights.

Promiscuous BOOTP server? - Forums Linux

Promiscuous BOOTP server? - Forums Linux

Promiscuous BOOTP server?

Posted: 09 Jan 2008 02:26 AM PST

On Wed, 09 Jan 2008, in the Usenet newsgroup comp.os.linux.setup, in article
<sadnet>, Magnate wrote:
 

Well, I don't think the bootfile for a Sun SparcStation5 is going to
work very well on your NCD X terminal, never mind that Intel box.
 

I don't use DHCP, never mind BOOTP, but I don't believe DHCP _needs_ the
MAC address by default - certainly there are enough people asking how to
make it match MAC to IP is such a hint. My understanding is that most
doents do suggest using it, but that's to reduce the horrendous
security hole of handing out IPs to anyone who asks.

Have you run through the DHCP mini-howto included in most Linux installs?

-rw-rw-r-- 1 gferg ldp 33678 Oct 20 2000 DHCP

Old guy

Can't boot Fedora Release 8

Posted: 08 Jan 2008 04:26 AM PST

On Wed, 09 Jan 2008 04:37:14 -0800, sbossert wrote:
 

This doc will be of immense help.

http://www.mjmwired.net/resources/mjm-fedora-f8.html

Stef

dpkg-reconfigure exim4-config: please help re interfaces to listen on

Posted: 08 Jan 2008 04:09 AM PST

"Bill Mar" <net> wrote in message
news:localnet... 

Doh! Of course, that's it. Thanks Bill - I'm now forwarding port X to port
25 on my firewall, and pointing Outlook to port X. It's working perfectly -
thanks again.

CC

Advanced LILO question: moving drive to a different computer

Posted: 06 Jan 2008 09:34 PM PST

rahul.net (Edward A. Falk) wrote:
 

Usually the boot drive has BIOS code 0x80



Florian
--
<http://www.florian-diesch.de/>
-----------------------------------------------------------------------
** Hi! I'm a signature virus! Copy me into your signature, please! **
-----------------------------------------------------------------------

Messed Up Hard Drive

Posted: 06 Jan 2008 03:37 PM PST

LenBum wrote: 


It sounds like the drive died. Having installed thousands of drives over
the last 20+ years I can tell you that some fail almost immediately. If
the BIOS says there is no drive I would return it and get a new one. I
like Hitachi...

-Philip

clock on news server

Posted: 06 Jan 2008 08:04 AM PST

Unruh <ubc.ca> wrote:
 
can 

Sure. Any idea why leafnode is complaining that they are more than 10 mins
adrift?

--
Richard Kimber
http://www.psr.keele.ac.uk/

USB devices disappearing from LVM

Posted: 06 Jan 2008 02:44 AM PST

On 8 Jan, 04:21, Matt Giwer <REMover.rr.com> wrote: 

Ahh. No. I'm replacing specific big chunks of space, such as /var/ftp/
pub and /var/lib/mock. I'm successfully mounting them, and am able to
mount them from /etc/fstab and umount them. That's not difficult.

The difficulty is when I reboot: I start getting errors about not
being able to detect the drives, even if they are marked "noauto", and
they show up as "inactive" in LVM. This may be what I get for putting
LVM partitions instead of direct partitions on there, but there were
reasons to do so.

I suspect that you are not using LVM?

no redhat kernel-source after building

Posted: 04 Jan 2008 04:11 PM PST

On Jan 5, 10:50 pm, The Derfer <com> wrote: 


Am I right about this or is at all bundled in devel now?
Is this step the one that builds the kernel-source:?

rpmbuild --rebuild kernel-2.4.21-52.EL.src.rpm --target noarch

hwclock problem with leapseconds - posix?

Posted: 01 Jan 2008 10:52 AM PST

<de> wrote: 

 

Yes, hwclock --utc --hctosys is ok but hwclock ---utc -systohc is broken.

hwclock --utc --hctosys runs this code in hwclock.c (note: --utc sets
variable universal):

/* We use the C library function mktime(), but since it only works on
local time zone input, we may have to fake it out by temporarily
changing the local time zone to UTC.
*/
zone = getenv("TZ"); /* remember original time zone */
if (universal) {
/* Set timezone to UTC */
setenv("TZ", "", TRUE);
/* Note: tzset() gets called implicitly by the time code, but only the
first time. When changing the environment variable, better call
tzset() explicitly.
*/
tzset();
}

But hwclock ---utc -systohc does not have the same code. It does this
instead:

if (universal)
new_broken_time = *gmtime(&newtime);
else
new_broken_time = *localtime(&newtime);

gmtime() does not use the timezone files at all but just thinks the system
time is counted at utc. Change the four lines above to something similar to
the --hctosys case and it should work ok. So even when using UTC, the
timezone files will be consulted.

Try the patch that follows... (There are also additional sleeps for about
half a second to fix resetting RTC. Without them a 'hwclock --systohc;
hwclock --hctosys' sequence causes an error of about 0.5 s in system time.
The question is whether the RTC time is really set to an exact second or an
exact half second when it is set.)

--- hwclock.c~ 2004-12-15 21:13:48.000000000 +0200
+++ hwclock.c 2008-01-10 13:38:11.000000000 +0200
@@ -455,8 +455,12 @@
*/

if (universal)
- new_broken_time = *gmtime(&newtime);
- else
+ {
+ /* Set timezone to UTC */
+ setenv("TZ", "", TRUE);
+ tzset();
+ }
+
new_broken_time = *localtime(&newtime);

if (debug)
--- cmos.c~ 2004-12-15 22:07:54.000000000 +0200
+++ cmos.c 2008-01-06 21:19:02.000000000 +0200
@@ -568,6 +568,7 @@
static int
set_hardware_clock_cmos(const struct tm *new_broken_time) {

+ usleep((unsigned long)430000);
hclock_set_time(new_broken_time);
return 0;
}
--- util-linux-2.12r/util-linux-2.12r/hwclock/rtc.c~ 2004-12-15 22:21:48.000000000 +0200
+++ util-linux-2.12r/util-linux-2.12r/hwclock/rtc.c 2008-01-06 21:24:34.000000000 +0200
@@ -302,6 +302,8 @@
int rtc_fd;
char *ioctlname;

+ usleep((unsigned long)430000);
+
rtc_fd = open_rtc_or_exit();

#ifdef __sparc__

Linux reboots right after Grug runs initrd

Posted: 30 Dec 2007 11:57 PM PST

Gilles Ganault <com> did eloquently scribble: 
 
 

An alternative would be to see out an antique friendly distribution.
(not all distributions are compiled for i686, some are still compiled for
i386)
--
__________________________________________________ ____________________________
| co.uk | |
|Andrew Halliwell BSc(hons)| "The day Microsoft makes something that doesn't |
| in | is probably the day they start making |
| Computer science | vacuum cleaners" - Ernst Jan Plugge |
------------------------------------------------------------------------------

What package will restore my application help files

Posted: 29 Dec 2007 11:14 PM PST

On Dec 30, 8:58 am, tek <com> wrote: 

By golly I stumbled on the solution. I first had to figure what
command was being executed to start the GNOME Help window. After some
digging I discovered it was /usr/bin/gnome-help which is actually a
link to /usr/bin/yelp. When I ran the command I received errors
pointing to the following missing shared objects.

lrwxrwxrwx 1 root root 43 Dec 30 11:47 libgtkembedmoz.so -> /
usr/lib/firefox-2.0.0.10/libgtkembedmoz.so*
lrwxrwxrwx 1 root root 37 Dec 30 11:49 libxpcom.so -> /usr/lib/
firefox-2.0.0.10/libxpcom.so*
lrwxrwxrwx 1 root root 42 Dec 30 11:49 libxpcom_core.so -> /
usr/lib/firefox-2.0.0.10/libxpcom_core.so*

So after recreating the links in /usr/lib, I ran gnome-help again and
received this error.

Yelp-ERROR **: Could not initialize gecko!
aborting...

Next I updated the yelp package to yelp.i386 0:2.18.1-8.fc7. After the
update everything was back to normal. Happy day! I wish I could
remember what I did to get things so out of whack.

kernel panic: no init found

Posted: 26 Dec 2007 08:33 PM PST

In comp.os.linux.setup, Jiancong
<com>
wrote
on Wed, 26 Dec 2007 20:59:03 -0800 (PST)
<googlegroups.com>: 

That, as it turns out, is the correct fix. The *boot* volume (/boot in
your /etc/fstab) is where the kernel resides, but the *root* is the root
of the entire directory tree. Of course /etc/init doesn't exist on
/dev/hdc7, which is what linux was trying to look for with root=/dev/hdc7.

You might also see

kernel /vmlinuz-2.4.20 root=/dev/ram real_root=/dev/hdc12 ramdisk_size=12000
initrd /initramfs-2.4.20

or some such in your instructions. In this case root=
is referring to a ramdisk, which has scripts to pick up
the real root later. The distinctions are a bit subtle.

--
#191, net
Useless C/C++ Programming Idea #2239120:
void f(char *p) {char *q = p; strcpy(p,q); }

--
Posted via a free Usenet account from http://www.teranews.com

locating and installing packages

Posted: 26 Dec 2007 11:25 AM PST

 

it should show up in your uname -a. Unless you are using more than 16g
of memory ( or certain types of processors) you wouldnt be needing the
hugemem kernel.

Partitioning SATA disk

Posted: 26 Dec 2007 04:01 AM PST

Dave Uhring wrote: 

Well a program kike

fred(int a, int b)
{
return a*b;
}


That will compile OK.

Won't run mind you.

But not all compiled programs are there to run on any given set of
hardware and OS.


 

Actually for practical application purposes they are.

with the sole exception of when you are bootstrapping a kernel, when you
are expecting to compile any libraries, and they are associated with the
source files of such.

Headers go with source files or with precompiled source files that are
not yet linked = libraries.

The compiler, the kernel development source and ITS headers and the OS
libraries and THEIR headers are not a one package thing: I can think of
many examples where you might want the compiler alone. Or the compiler
and the libraries-headers,but not the kernel source, or any combination.

 

Well I think compilers without header files are perfectly FINE.

*Libraries* without them are effing useless though.

Booting from PCMCIA CompactFlash

Posted: 25 Dec 2007 10:45 AM PST

On Thu, 27 Dec 2007 13:37:27 -0500, Chick Tower wrote:
 

Well, you could just try the install and see what happens. Worse that
can happen is it's not usable. Just don't pick KDE, GNOME or XFCE for
the GUI environment. Use just a window manager like Fluxbox or IceWM to
keep the GUI overhead low.

FWIW, I ran Mandrake 7.0, circa 2001, with KDE on a 166MHz machine with
just 64MB of RAM, 256MB swap, and it worked fine, quite usable. However,
it was a lean, no frills system: Nothing running that didn't absolutely
have to be. However, I know running a contemporary distro on that same
system today would probably not work or, if it did, would be too slow due
to swapping to be usable.

Stef

Grouping Tasks Microsoft Project

Grouping Tasks Microsoft Project

Grouping Tasks

Posted: 01 Nov 2005 06:10 AM PST

In article <com>,
Jim Jones <microsoft.com> wrote:
 

Jim,
It sounds like the Grouping function is what you want. Look for
"Grouping" in the Project help file.

Hope this helps.
John
Project MVP

Hour control of how else ?

Posted: 01 Nov 2005 05:57 AM PST

In article <com>,
"Jan H-L" <microsoft.com> wrote:
 

Jan,
First of all, you shouldn't be entering either the task Start or Finish,
that's Project's job. Except in a few isolated cases (e.g. a task starts
independently of all other tasks and does not start when the project
starts), the task information you should be entering are:
1. Task Name - performance tasks should be in action verb format
2. Task Duration - whether in minutes, hours, days, etc. (Note: Task
Duration is NOT the same as Work effort although if a resource is
assigned at 100% the values in those two fields will be the same.)
3. Linkages between tasks - this sets up the logical flow of the
activities - the default is finish-to-start
4. Resource assignments - the people or material necessary to complete
the task

Given the above information, Project calculates a schedule. That is, it
will set up all task start and finish dates (and times if the option to
display time is selected under Tools/Options/View tab). Project will
also calculate Cost based on the resource pay rate x Work hours plus any
Fixed Cost associated with the task.

The user "controls" resources and cost by developing a realistic plan
and good project management techniques (e.g. workarounds when things
don't go as originally planned).

For some good reference material, you might want to go to our MVP
website at: http://www.mvps.org/project/links.htm
and take a look at fellow MVP, Mike Glen's series on Project lessons and
techniques.

Hope this helps.
John
Project MVP

Creating a Project with VBA (MS Project 2003 Pro)?

Posted: 31 Oct 2005 03:19 PM PST

I copied it to the Developers Newsgroup for MS Project.

"Mike Glen" wrote:
 

Historic Resource Costs

Posted: 31 Oct 2005 01:36 PM PST

Gerard,
Hello. yes I posted that last question too. I was hoping someone could point
me in the right direction for coding advice as I cannot do this all by hand
with so many employees. Unfortunately, like many others I have inherited this
ms project file...
Do you know of any other places I can look for a little VBA/ MS project help
with this?
Thanks so much!
Jenn

"Gérard Ducouret" wrote:
 

Why are tasks being assigned to non-working days?

Posted: 31 Oct 2005 11:57 AM PST

JodyC --

To which calendar did you add the holidays? Is this calendar set as the
Base Calendar for each resource listed in the Resource Sheet view of your
project? Let us know.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We wrote the book on Project Server"


"JodyC" <microsoft.com> wrote in message
news:com... 

Vacation Schedules on Large Projects How do you handle them - Best

Posted: 31 Oct 2005 08:20 AM PST

We are not using server - they have ordered it along with SQL, so maybe in
the future it will be running for us but that will be to late as I need to
find something to manage now.

I do not want to manage it in excel as I want Proj to adjust dates to tasks
when people have vacation. WIth 80 people and 3 weeks vacation min. for
everyone, forgetting about all that time off would be a mistake.

Have any other thoughts? Maybe someone else will have some ideas for me?

"Michael Balda" wrote:
 

VB problem

Posted: 31 Oct 2005 08:10 AM PST

In article <com>,
"WD" <microsoft.com> wrote:
 


WD,
What exactly are you referring to when you say, "... the set ref command
...."? The only way I know to set references is via the "addfromfile" or
"addfromguid" and either of those must be set with an event macro prior
to attempting to run a macro where the reference is required. But I'm
always willing to learn new techniques.

John
Project MVP

VB offset error from Jack Dahgren's Code

Posted: 31 Oct 2005 08:06 AM PST

What does xlRow = at that time?
I just tried it with the Excel 11 (2003) object library and it works fine.
I developed it on excel 2000.

I suspect you are missing some of the code. Copy and paste the whole thing
again. The first 4 lines should be:

Option Explicit
Dim xlRow As Excel.Range
Dim xlCol As Excel.Range
Sub TaskHierarchy()

If you haven't defined xlRow then you will get an Object required error.

You can also get rid of the dwn and rgt functions if you like and just use
plain old offset within the code. This example is supposed to demonstrate
passing parameters (very simple ones) so that is the reason they are there
in the first place.

--
-Jack ... For Microsoft Project information and macro examples visit
http://masamiki.com/project
or http://zo-d.com/blog/index.html
..
"scott_hanebutt" <microsoft.com> wrote in message
news:com... 
and 
2003, 
first 
to 
cursor at 
by 
idea. If 
problem 
then 
message 
is 
from 
visit 
http://masamiki.com/project/exporthierarchytoexcel.bas. 

Resource Calculations

Posted: 31 Oct 2005 06:17 AM PST

Hi Robert,

In that case, try posting on the server newsgroup. Please see FAQ Item: 24.
Project Newsgroups. FAQs, companion products and other useful Project
information can be seen at this web address:
http://project.mvps.org/faqs.htm

Mike Glen
Project MVP


Robert wrote: 

A new year

Posted: 31 Oct 2005 05:56 AM PST

You're welcome, Jim :-)

Mike Glen
MS Project MVP


Jim Jones wrote: 

How to hide inactive resources

Posted: 31 Oct 2005 05:46 AM PST

Hi Chris, 
:)

Of course it is. It's always interesting to compare different points of
view!

Gérard

zooming in on task pane - not gantt chart

Posted: 30 Oct 2005 08:04 PM PST

You're welcome, Kimi :-)

Mike Glen
MS Project MVP


Kimi Himi wrote: 

colour code milestones in calendar view?

Posted: 30 Oct 2005 06:14 PM PST

Benjiluck:

You might want to use a custom field (flag/text) to establish the difference
in the milestones or you can use a tag. It sounds like a custom field to
define the differences would be best route and then you can color code that.

"Benjiluck" wrote:
 

Constraint - Start no earlier than

Posted: 30 Oct 2005 11:21 AM PST

>That's very strange behaviour. Are you scheduling tasks to start ASAP?

Yes. If I enter a new task, it says “As Soon As Possible.”
 

Yes
 

Yes. I have several and they are all FS
 

Yes
 
was giving you problems should start on either the first working moment
after its predecessor finishes or the constraint date, whichever is later. 

I dunno. Maybe it’s just me I’ve always found Project to be a little quirky
like this. I can usually solve a problem but it seems to invariably involve
taking a task out and putting it back in.


"Steve House [Project MVP]" wrote:
 

Saving Reports to MS Word

Posted: 29 Oct 2005 05:33 AM PDT

In article <hip9f.5466$bigpond.net.au>,
"Bob Sinclair" <com> wrote:
 

Bob,
You're welcome.

John

Work Week MSP98 (Newbie Question)

Posted: 29 Oct 2005 05:07 AM PDT

Wow - great Mike, thanks for the heads-up. I'll check all these articles
over the next couple of days.

Appreciate the support ;)

--
Kahuna
------------
"Mike Glen" <glenATmvps.org> wrote in message
news:phx.gbl... 

Wrap text in Microsoft Project 2000

Posted: 29 Oct 2005 02:27 AM PDT

Thanks Rod,

When using 'Print preview' on various printers, the problem continues to
exist; i.e. the text remains on 01 line when printed but is wrapped in the
original doent. It also occurs in a similar fashion when I .pdf the
doent.

Suggestions ??? Thanks

"Rod Gill" wrote:
 

Visual Basic Code

Posted: 28 Oct 2005 11:12 AM PDT

Also more info on creating your own here:
http://zo-d.com/blog/archives/programming.html

--
-Jack ... For Microsoft Project information and macro examples visit
http://masamiki.com/project
or http://zo-d.com/blog/index.html
..
"John" <com> wrote in message
news:microsoft.com... 
wondering 

Critical Path - Critical Chain Tracking of Projects

Posted: 28 Oct 2005 09:50 AM PDT

Stuart,
You need to be able to highlight the Resource Critical Path, as
explained in Eric Eyttewaal's book, Dynamic Scheduling with MSP 2003.
By highlighting the RCP you will be able to keep an eye on tasks that
are either driven by logical dependencies (CPM) or by resource
dependencies.
In his book Eric explains a manual method for highlighting the RCP. As
well, a macro is available by license that will do this for you
automatically.
Yes, this is a feature that should be available in MSP. One of the very
big limitations of the CPM is that it does not take resource
vailability into account.

Charlie Ashmore

Predecessor Driven Completion

Posted: 28 Oct 2005 07:59 AM PDT

That was great. Thanks, it's working fantastic now.

"Jan De Messemaeker" wrote:
 

time phased network diagram

Posted: 28 Oct 2005 07:28 AM PDT

Thanks. I think we are going to try out the stuff from critical tools. I
just wanted to try to make sure I was not missing something in Project.

I haven't seen Eric in a while. If he gets back in, I'll say you said HI.
jlb

"davegb" wrote:
 

PPBES and Project

Posted: 28 Oct 2005 06:58 AM PDT

Sorry. The government...espcially the DOD and NOAA are using a busineess
process called: Planning, Programming, Budgeting, and Execution Sytem
(PPBES). Nothing magic...but it is a well established in the government.

It's obviosly cyclic, with no project start or stop date.

Thanks/cascott

"davegb" wrote:
 

Hiding Subproject summary tasks?

Posted: 28 Oct 2005 03:33 AM PDT

Thanks for that!

If I grouped the tasks by 'Project', 'Resource Initials', 'Outline Number'.
Can I still 'flag' the summary tasks there? Or is there another way to do it?

"davegb" wrote:
 

Task splitting - a process, not a parameter?

Posted: 28 Oct 2005 02:50 AM PDT

Hi George,

Split Parts of a task can be read using the SplitParts method.
You can read the help through the object browser.
To help you onthe way, here is the help on the SplitParts Object (which has
a count, a start and a finish property) - go on reading I comment on
asignment splist below-

SplitPart Object, SplitParts Collection Object






Represents a task portion. The SplitPart object is a member of the
SplitParts collection.

Using the SplitPart Object

Use SplitParts(Index), where Index is the task portion index number, to
return a single SplitPart object. The following example lists the start and
finish times of each task portion of the task in the active cell.

Dim Part As Long, Portions As String

For Part = 1 To ActiveCell.Task.SplitParts.Count
With ActiveCell.Task
Portions = Portions & "Task portion " & Part & ": Start on " & _
.SplitParts(Part).Start & ", Finish on " & _
.SplitParts(Part).Finish & vbCrLf
End With
Next Part

MsgBox Portions
Using the SplitParts Collection

Use the SplitParts property to return a SplitParts collection. The following
example returns the number of task portions for each task in the active
project.

Dim T As Task

For Each T In ActiveProject.Tasks
If Not (T Is Nothing) Then
MsgBox T.Name & ": " & T.SplitParts.Count
End If

Next T
Use the Split method (Task object) to add a SplitPart object to the
SplitParts collection. (The Split method creates a split in a task.) The
following example creates a split in the task from Wednesday to Monday.

ActiveCell.Task.Split "10/1/97", "10/6/97"
-------------------------------------------------

There is no method for asignment splist but they can be discovered by
looking for zero-work periods using the timescaledata method and the
timescalevalues object.

Hope this helps,


--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"G Lykos" <com> schreef in bericht
news:phx.gbl... 
to 
Subscribe to: Posts (Atom)