Pages

Search

MSExchange2003 - Microsoft Exchange

MSExchange2003 - Microsoft Exchange

MSExchange2003

Posted: 20 Mar 2008 04:34 PM PDT

Hi Lostone,

Assuming that you are talking about picking up both SMTP and POP mail,
use Exchange to pick up SMTP mail, but use a product like
SmartPOP2Exchange (JAM Software) to pick up POP mail. Exchange can
only pick up POP mail every 15 minutes, whereas a product like
SmartPOP2Exchange can pick up POP mail every minute.

Karl

"Lostone" <rr.com> wrote in message
news:com...
What is the default path for server 2003 servers when adding users
using
POP3 and SMTP.

Is it Pop3-server.servername.com?
Smtp-server.servername.com?
Pop3 mail.servername.com?
SMTP mail.servername.com?

I am running 2003 server with 2003 Exchange and have set it up for
pop3 and
smtp.
Yes I have alot of learning to do.

Thanks,

Lostone

Exch2007 Public Folder: Publishing Editor cant delete other's fold

Posted: 20 Mar 2008 03:01 PM PDT

I would think the same.

Root folder has both users in a group that has Publishing Editor rights.
Thats all the rights on the root folder for these 2.

User A creates a folder underneath root folder, and both A & B have
publishing editor rights.

However user B cannot delete this new folder under root.

"Ed Crowley [MVP]" wrote:
 

Public Folders: Deny Owners ability to change Default & Anonymous

Posted: 19 Mar 2008 05:32 PM PDT

If there is I don't know about it.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Paul" <microsoft.com> wrote in message
news:com... 

Mail from certain people not getting through

Posted: 19 Mar 2008 09:54 AM PDT

That was a good link but it does not address the problem here. I have
safelist aggregation turned on for the server and I have sent several
messages to this user so his address should be in the whitelist. Is there a
way to get a list of what has been whitelisted?

I am not sure of the processing order but if it matches the order in the
antispam tab then the sender id agent does it's work after the content filter
has completed it's work. I am guessing that the message is getting past the
content filter but is being killed by the sender id agent given the agent log
entry. From what I can tell this is a configuration setting that our vendor
will have to take up with their ISP so the DNS record can be updated. But
they have no clue since they simply forward all outbound mail to their ISP
for delivery. I have not attempted to configure this for our domain yet
either so I don't know how to help them.

"John Oliver, Jr. [MVP]" wrote:
 

Exchange email setup

Posted: 19 Mar 2008 08:04 AM PDT

Exchange 2003, I'll give it a try thanks.

"Martin Blackstone" wrote:
 

How to Migrate from IPlanet to Exchange 2007

Posted: 17 Mar 2008 10:33 AM PDT

Andy is an MVP
https://mvp.support.microsoft.com/profile=F915F56B-7898-4BE3-A7A0-153EC28E084A


"GetSammy" <microsoft.com> wrote in message
news:com... 

Restrict one storage group to only send internal

Posted: 17 Mar 2008 04:42 AM PDT

That's what I thought, too.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Problems with RecipientValidationEnabled

Posted: 16 Mar 2008 12:16 AM PDT

Is it your only/primary Authoritative Domain? Is AddressBookEnabled set to $true for that domain?

Use:
Get-AcceptedDomain | select Name,DomainType,AddressBookEnabled

--
Bharat Suneja
MVP - Exchange
www.zenprise.com
NEW blog location:
exchangepedia.com/blog
----------------------------



"Marty List" <yahoo.com> wrote in message news:com...


Yes, I think so:



[PS] H:\>get-transportagent "Recipient Filter Agent"|fl



Identity : Recipient Filter Agent

Enabled : True

Priority : 5

TransportAgentFactory : Microsoft.Exchange.Transport.Agent.ProtocolFilter. RecipientFilterAgentFactory

AssemblyPath : D:\Program Files\Microsoft\Exchange Server\TransportRoles\agents\Hygiene\Microsoft.Exc hange.Transport.Agent.Hygiene.dll





From: Bharat Suneja [MVP] [mailto:org]
Posted At: Sunday, March 16, 2008 2:12 PM
Posted To: microsoft.public.exchange.misc
Conversation: Problems with RecipientValidationEnabled
Subject: Re: Problems with RecipientValidationEnabled



Is the agent enabled?


--
Bharat Suneja
MVP - Exchange
www.zenprise.com
NEW blog location:
exchangepedia.com/blog
----------------------------





"Marty List" <yahoo.com> wrote in message news:com...

I can't get Exchange 2007 to block or reject messages from invalid recipients. I don't have an Edge Transport server, and I've ran install-antispamagents.ps1 on the hub transport server. Under Recipient Filtering/Blocked Recipients I enabled "Block messages sent to recipients not in the global address list" and confirmed that "get-recipientfilterconfig" shows "RecipientValidationEnabled : True".



Yet when I send mail from an outside account or from telnet, invalid recipients are accepted and no NDR is generated. Any ideas?

archive products - the stubs they leave behind?

Posted: 15 Mar 2008 05:28 PM PDT

Gartner is not the market.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Dave" <postalias> wrote in message
news:com... 

Exchange 2003 - More Questions about changing SMTP connector from smarthost to direct for outgoing internet mail

Posted: 14 Mar 2008 05:41 PM PDT


"Rich Matheisen [MVP]" <com.NOSPAM.COM> wrote in message
news:com... 

I wasn't sure, and it didn't seem like it would hurt anything to try it.

 
Currently we've only got a few production servers, with about 5,000 users.
There's a lot going to be happening soon; in the next few months we're going
to be migrating to Exchange 2007 and another project has us moving the
external DNS in-house. This solution was just to solve a specific issue we
had with the smart host/McAfee applaince and get us through with minimal
changes at this time.
 

Running out of disk space - move the databases?

Posted: 14 Mar 2008 04:35 AM PDT

Read "Optimizing Storage for Exchange Server 2003"
http://technet.microsoft.com/en-us/library/bb125079.aspx


"Arne And" <com> wrote in message
news:googlegroups.com... 

Exchange and Palm OS

Posted: 13 Mar 2008 05:24 PM PDT

Lanwench [MVP - Exchange]:
 

Sorry, I thought crossposting was forbidden...

--
Floor

Microsoft Word - Word 2010 reducing memory storage when inserting graphics

Microsoft Word - Word 2010 reducing memory storage when inserting graphics

Word 2010 reducing memory storage when inserting graphics

Posted: 20 Dec 2014 02:01 PM PST

I did a little memory test to determine how to minimize memory use for images in Word 2010.  My conclusions are listed in the following image.  If there is a better way, I am interested in hearing about it. 

Best Regards,

Les

ERROR MESSAGE 0x80270113 Word 2010

Posted: 20 Dec 2014 01:56 PM PST

I tried opening a short cut to a document and am getting the above error message.

Any suggestions or help would be appreciated

Thank you in advance

Hank

Inserting a Word 2010 document (PC version) into another word document -- cannot re-size it

Posted: 20 Dec 2014 12:45 PM PST

I have converted a pdf form into Word, so that it publishes in a clearer fashion.

Now I need to insert this Word form into another Word document and size it to fit the page.  The conversion looks OK, but I cannot re-size the form, which seems to be a combination of a table and image.  I was able to do this without any problems in prior Word versions, but not now.   I have to decrease the size using % or cropping, but the form doesn't decrease in size, instead, parts get "erased."  

I have tried copy and paste, insert as an object, etc. with no success - the form refuses to be re-sized/decreased.  Maybe there is something about the form itself that is not allowing it to be re-sized.  Any ideas?  I'm trying to publish in CreateSpace and inserting or copying and pasting pdf files is not working- the image comes out too blurred; using the converted Word form has worked better in the past as far as publishing is concerned, but I cannot re-size it to fit a set format.

Thanks in advance.

Sheila

Perpetual Calendar

Posted: 19 Dec 2014 04:32 PM PST

I am a member of a large social organization (600 members).  Every year we publish a month by month calendar with the members' birthdays on it.  I recently became the manager of this calendar.  In the past, the calendar was kept in Microsoft Word and was updated througough the year by maually deleting past members and adding new members.  When it came time to make the calendar for the new year, individual days would be copy and pasted to the new year's calendar.  

This seems crazily inefficient to me.  Is there a way using word or access or excel or really any other program to almost mail merge a table of birthdays into a calendar?  My goal would be to be able at the end of the year to just print out a new year's calendar.  I tried using google calendar and outlook calendar, but the formatting was such that it didn't work.  

Thanks!

Remove borders with Alt+Ctrl+U

Posted: 19 Dec 2014 04:24 PM PST

Split from this thread.

I have an issue, When I use the ALT+CTRL+U it gets rid of which sections I have bolded ect. This wouldnt normally be an issue on a small document but this one is 10,000+ words. 

when I CTRL+A and try removing boarders there are none (they are not gridlines) yet when I ALT+CTRL+U it removes the lines however I also get the above issue. 

Is there a way to remove the lines without undoing the parts I have bolded/underlined ect...?

Office 'Word' missing from Start Menu, All Programs, Microsoft Office Folder

Posted: 19 Dec 2014 04:08 PM PST

OS: Windows 7 Pro x64

Microsoft Office Academic 2010

When I opened the Administrator account for the first time to add a desktop short cut for Word, I went to: Start Menu, All Programs, Microsoft Office Folder, everything was there as expected except no Office Word....

I know Office is installed because my two Admin/User accounts both have the file in the proper place in the start menu.

I can also right click on the Desktop of the Administrator account and pull up a copy of Office Word... it just isn't a shortcut.

I tried the following: Computer > C Drive > Program Files > Microsoft Office > Office 14 > (application) WINWORD (right click - send to desktop)

Note: Computer > C Drive > Program Files(x86), > Microsoft Office > Office 14 > (application) contains no 'WINWORD' file...

I could re-install/repair Office from the installation disc, or leave things as they are. I am wondering what the Sam heck is going on?

Add Open Recent File command to the Quick Access Toolbar

Posted: 19 Dec 2014 04:08 PM PST

Split from this thread.

One of the customizations I do to the QAT is to add the "Open Recent File" command to it.

In your very informative post, you stated "One of the customizations I do to the QAT is to add the "Open Recent File" command to it."  How.  How did you add that command?  I used it all the time in previous versions of Word and I did not find that as an option when I customized my QAT in Word 2013.  Before you go there (if you were going to go there) I'm not really interested in any third party solutions.  I might be interested in some programming to bend Word 2013 to my will using brute force.  What I'd like to believe is that Microsoft didn't arbitrarily eliminate such a useful command but just renamed it something unintuitive.  If they did delete the command from the QAT list of possible commands, I'll just use this version of Word as my last Microsoft productivity software solution and eventually switch to Apple or maybe just stop using words to communicate altogether.

PDF Conversion Hiccups

Posted: 19 Dec 2014 03:34 PM PST

When converting a large-ish word document (130 pages, >6 mb) to a pdf, certain text comes out pixelated and fuzzy. The curious thing is it's only the second-level section heading (which is based on the 'Heading 2' style). This would be a heading such as "B-2 Facilities Requirements". I use styles to do section headings and link it all to a Table of Contents. It goes four levels deep at the deepest (something like B-2.1.4). Everything else comes out crystal clear. Images (pictures) could be sharper, but all other text is perfect.

There are a plethora of different methods to convert to PDF, but the most effective method I've found has been to just 'Save As - PDF' through the standard Save As interface in Word. Any suggestions as to why this particular heading is having trouble converting to a pdf cleanly? Or how to get pictures to convert more cleanly?

Thanks!!

Academic License key on OEM install? - Microsoft Office forums

Academic License key on OEM install? - Microsoft Office forums

Academic License key on OEM install?

Posted: 06 Feb 2008 03:37 AM PST

They have ordered additional licenses and got a 2007 key this time, previous
versions were 2003 and they didn't order new media.

Will have to get them to order a CD, I was trying to get their new PC's up
and running without the delay of getting the CD delivered.

Thanks

"JoAnn Paules" <com> wrote in message
news:%phx.gbl... 

Reinstall of Office 2003: Will Oulook retain settings, and .pst in

Posted: 04 Feb 2008 08:15 PM PST

Thanks for the reply. If anyone knows of this registry fix, I'd be happy to
try it. Otherwise, the uninstall/reinstall may be the best way, especially
since the customer will be doing this themselves.
Has anyone seen a KB article about the GA tool not reporting correctly? I'll
do some searching today.
Regards,

"DL" wrote:
 

Error modifying .msp in Office 2007 OCT

Posted: 04 Feb 2008 11:46 AM PST

Hi Bob,

I do not receive the error when i create a new .msp file. The new .msp did
not have all settings of the original .msp file. The .msp file are saved to a
network share. I am working in Windows XP SP2/Vista Business x32\x64.

Brian

"Bob Buckland ?:-)" wrote:
 

Microsoft Office Product Key Recovery

Posted: 04 Feb 2008 09:34 AM PST

I guess you would need to go back to however you downloaded from, if you
could remember

"Brett May" <microsoft.com> wrote in message
news:com... 

TO UNINSTALL OR NOT...???

Posted: 02 Feb 2008 09:29 PM PST

your welcome

"Leslie" <microsoft.com> wrote in message
news:com... 

Corrupted setup disk 2003 version

Posted: 02 Feb 2008 07:07 PM PST

Is this by chance an OEM version of Office 2003 that came with your original
laptop (May say something about use on new computer only on CD label)? If
so you will need to purchase a new version for your new laptop.

If this is a retail version, you really need to see if Office 07 is
installed on the laptop. If so you need to uninstall that version before
you can successfully install 03.

Let us know about the OEM status to allow us to help others.


<com> wrote in message
news:googlegroups.com... 

Outlook 2007 won't install "not available"

Posted: 02 Feb 2008 06:35 PM PST

Is there an Microsoft Office\Office11 folder listed in your Programs group
(explorer) containing any OUTL*.* files?

"Jack Aubrey" <microsoft.com> wrote in message
news:com... 

error code 25004

Posted: 02 Feb 2008 01:56 AM PST

did not work use BitDefender)

turning off UAC also was of no help

have downloaded another office trial to no avail

using vista ultimate 32-bit


tia,

stu

"Mary Sauer" <rr.com> wrote in message
news:#phx.gbl... 

--
stu

Where does Office 2003 validate over the Internet

Posted: 01 Feb 2008 03:15 PM PST

<< I'm not quite clear why using a proxy server would not work >>

A proxy would work and does for other computers. These computers are
sensitive test stations with no games or other distractions available.
Defaut Gateway is removed and Proxy entries are locked down to keep off the
Interent purposely.

The problem is that many, but not all, times a computer will request
activation again. Not sure why, but it does. For the computers who access
the Internet via a proxy this is not an issue, but on these locked down
secure computers it is a problem and requires me to undo all my lockdowns to
activate again.

We do not have a VL for XP and Office - Too expensive. We get OEMs because
since Win 95 and NT 4.0 we really have not had a computer that we could say
really ran well with the lastest release of Windows and Office for long. We
usually upgraded the hardware shortly after to the lastest as well. It
makes more sense for us to purchase the $140 OEM of Windows and $170/$325 of
office Basic/Pro rather than the double priced VL.

The reason I would like to get the info on where the validation server is on
the Interent is so I can build a static route to the WPA/WGA servers for all
my computers so if they have to activate they can do it even on the locked
down computers.

"Bob Buckland ?:-)" <75214.226(At Beautiful Downtown)compuserve.com> wrote
in message news:%phx.gbl... 

Any way to direct what drive Office 2007 SP1 installs to?

Posted: 31 Jan 2008 11:42 PM PST

To add a little to Bob's answer, if you want Office 2007 to be on a
different drive, you'll need to uninstall Office 2007 and reinstall it
using the Custom option. Within the installation dialog you'll be
given the option to select where to install Office. Once you have it
installed, you can then add the Office 2007 SP1.

Brian Bygland

"Bob Buckland ?:-)" <75214.226(At Beautiful Downtown)compuserve.com>
wrote in message news:phx.gbl... 

Touble installing Office Enterprise

Posted: 28 Jan 2008 10:23 PM PST

Hi Bob
Tried that also, got the phone numbers and spent all day unsuccessfully
pressing different option numbers to get no-where within Microsoft. All I was
eventually offered was an e-mail address to send a technical question to, but
have since found out that this is a "general" e-mail address and so I have no
idea when someone will look at this issue !
Uninstalled the free demo software that came with the new laptop and it
still doesn't install. So, currently frustrated big-time with a product that
won't install, cost £17 and has cost more in phonecalls and my time so far !
Any other ideas would be greatly appreciated
Richard

"Bob Buckland ?:-)" wrote:
 
Subscribe to: Posts (Atom)