Pages

Search

Microsoft Word - Page number only starts at 2 or 0, for even-layout page

Microsoft Word - Page number only starts at 2 or 0, for even-layout page

Page number only starts at 2 or 0, for even-layout page

Posted: 26 Feb 2015 02:43 PM PST

Hello,


I want my body matter to start with a page that has the gutter on the right. Since I have mirror margins for my doc, I could only achieve this by setting the first page of the body matter, which is also where a new section of the doc starts, as a SectionStart=EvenPage, from Page Layout. However, that necessarily makes the page number starts with 2, and if for the fotter's page number field I choose StartAt=0  instead of 1, then it actually does start at 0.


It seems I have the problem described here (http://support.microsoft.com/kb/283292) but those workarounds didn't help.

Can't the parity of the page (as regards the side of the gutter) be independent from its parity as regards page numbering, so my numbering can start at 1 even though the first page is laid out as an even page?

Thanks for any suggestions.

CREATE MACRO FOR "ACCEPT CHANGE" & "REJECT CHANGE"

Posted: 26 Feb 2015 02:27 PM PST

I have Word 2013.  I want to create a keyboard driven macro that accepts changes made in Track Changes and one that rejects such changes.  In my previous version of Word (Word 2003) I was able to do this easily, assigning a keyboard combination of "Alt + W" to accept changes, and "Alt + Q" to reject them.  After several tries I have been unable to do this, even after following the "Help" instructions (which I found wanting).  Can someone take me through the steps for word 2013?

Ellipse

Posted: 26 Feb 2015 02:21 PM PST

This deals with Microsoft word.

^+ is an EM Dash

^= is an En Dash

^p is a paragraph break

What is the special (sorry not sure of the term) for the ellipse?

And where do I find a list of these items?

When creating a form, how do I make a drop down menu within the drop down menu itself?

Posted: 26 Feb 2015 01:49 PM PST

 So I am trying to create a form with a drop down menu with the legacy tools, and the drop down form field box.  I have about 48 things to put into the drop down menu and I believe the limit is 25, so I would like to put a drop down menu within the drop down menu itself, so when users selected the drop down menu, they are given 4 options and when they go to one of the options in the drop down menu they have more options to choose from in each of the 4 selections. I hope this makes sense to someone.  I am currently using word 2010 edition and if there is any information you need to solve this problem, please let me know. 

Editing a file

Posted: 26 Feb 2015 01:45 PM PST

Have a PDF file I downloaded to a word file, it will not let me edit the file, keep going to picture mode or when I hit file the info part says protected file. How do I get to compatibility mode?

shortcut is deleted has been changed or moved.

Posted: 26 Feb 2015 01:35 PM PST

Two days ago I thought I had a Virus on my computer. I was going to completely restart my computer to delete everything. So i saved my ITunes, Documents I also copy and pasted, Microssoft word, Publisher, Excel, and Powerpoint on my flash drive! I didn't end up resetting my computer so everything stayed on it i went back to my flash drive to move everything back but when I went to open Microsoft word and its said word shortcut is refers to has been changed or move, so this shortcut will no longer work properly. do you want to delete this shortcut?

I don't know what to do I all ready payed for them like a year ago i don't want to buy them again.

Is there anyway I can save them?

Headers and Footers disappear

Posted: 26 Feb 2015 12:48 PM PST

As I scroll through doucments to review them frequently my headers and footers will just disappear. I am not clicking on anything in the ribbon bar. It usually happens as I change pages in the document. Once they are gone they won't come back, but they are there if it is printed. Why? How do I stop it from happening?

Wrap text "through" an image

Posted: 26 Feb 2015 11:48 AM PST

I have done this several time in the past; even just a few weeks ago. However all of a sudden now I cannot get the text to go "through" the image no matter what I do. It will not let the cursor get inside the image.

Optional Paragraphs - use Building Blocks?

Posted: 26 Feb 2015 11:45 AM PST

I'm creating a template for a document that has several optional paragraphs.  I know how to easily use a Building Block Content Control for most of them, however, there is one place in the document where you either insert a certain paragraph or you insert nothing at all. 

How can I set up this situation so that if the paragraph isn't needed, then the content control - and the paragraph which contains it - get deleted?

I'm thinking I need to create a procedure for the ContentControlOnExit event, but I'm not exactly sure what that procedure might be.

Any help is greatly appreciated.

Thanks,

Jeri

Outlook Form Issue - has not be solved when posted in outlook forum

Posted: 26 Feb 2015 10:56 AM PST

Sorry to bother this board but I'm desperate for an answer to this Outlook  2010 forms question:

I have created a new outlook form with various created fields.  I have saved this form in the organization library folder and a copy of it to my personal folder.  When I use and send the form I see all the fields, fill them out and press send.  The person I send it to does not see any of the fields or anything I have written.  The only thing they see is what I type in to, from, subject and in the message body.  What have I done wrong?  Thank you.

Readability Statistics to calculate GULPEASE Index

Posted: 26 Feb 2015 10:16 AM PST

I created a macro to calculate the GULPEASE Readability Index for Italian language. When I run it, I get run-time error '4658', that is, «Application-defined or Object-defined error»

Here is the macro:

                

Sub Readability()
    Dim DocStats As String
    Dim MBTitle As String
    Dim rsi As ReadabilityStatistics
    Dim rs As ReadabilityStatistic
    Dim rs_words, rs_phrases, rs_chars, gp As Double

    MBTitle = "Statistiche di leggibilità"
    DocStats = ""

    Set rsi = ActiveDocument.Content.ReadabilityStatistics
    For Each rs In rsi
        DocStats = DocStats & rs.Name & ": " & rs.Value & vbCrLf
    Next rs

    ' Calculate GULPEASE
    rs_words = Replace(rsi(1).Value, ",", "")
    rs_phrases = Replace(rsi(4).Value, ",", "")
    rs_chars = Replace(rsi(2).Value, ",", "")
    gp = 89 + ((300 * rs_phrases - 10 * rs_chars) \ rs_words)
    DocStats = DocStats & "Indice GULPEASE: " & gp & vbCrLf

    MsgBox DocStats, vbOKOnly, MBTitle
End Sub

The Replace statements are necessary since ReadabilityStatistics returns number with comma as thousands separator which is interpreted by VBA on Italian platforms as decimal separator, changing completely the results of any arithmetic calculation :-(

Pressing DEBUG I get the line where the error occurs: «For Each rs In rsi»

Any help appreciated.

Sorting fonts

Posted: 26 Feb 2015 08:35 AM PST

I wish there was a way to sort fonts by type.  Certain times I want to use a font that looks like handwriting,  Another time: Old Western print; childish print, etc. I think you get the idea.  If I could create categories then sort my fonts into those categories so I see just the fonts I want to use for a particular purpose. 

Lost autosaved document on iPad office

Posted: 26 Feb 2015 08:27 AM PST

Hi,

I have spent 3 hours researching my next sermon...copying and pasting to a document that was set up to autosave.  I went to another app and came back and the document wasn't there--anywhere!  This is not the first time this has happened.  It has happened enough that when I am typing anything important, I take the time to email it to myself so that if it is lost, I have a backup.  Does anyone know what is going on?

Thank you.

English word document in attachment received in foreign text

Posted: 26 Feb 2015 07:55 AM PST

The other day I received an email from a reputable source, a society to which I belong, with an attachment. I opened it as not likely to be suspicious, and the text was in what looked like an Asian script in my Win7 Home 64 browser. My wife received an identical email and opened it with an Apple IPod. Her's was in

After being detached, both became foreign text. However using Polyglot 3000 by inserting a small part of the foreign text, the whole attachment was viwable in English.

Can anyone suggest why this oddity may have occurred, is it something to do with my machine? If so what need I do? Or was the anomaly created remotely?

numbering pages

Posted: 26 Feb 2015 07:24 AM PST

when I number my pages, it only lists the page number under the pages with headings. Example: heading (pg 1), 3 page body, heading 2 (pg. 5)

Microsoft Word 2013 Templates

Posted: 26 Feb 2015 07:01 AM PST

 Hello,

 I have two concerns if anyone can assist I would be grateful.

 One:     I have created a template in word 2013. I simply want to edit the template,  and save under the same name as I use to in earlier vs of word.

 not able to do so in vs 2013 .   I want to be able to open the saved custom template as a template, make changes and resave. 

 can anyone help.

 Two:

 I want to remove a customer template from the featured selection of templates.   you cant right click?? and the unpin feature is a waste.

 can some one assist with this please

 thanks

 

Custom Style, Automatic Indenting

Posted: 26 Feb 2015 06:08 AM PST

Hello!

I have a question about creating custom styles. First off, I have a document format that follows the following format (this is a rough approximation):

Heading 1

  • Heading 2
    • Heading 3
      • Heading 4

Right now, each of those levels is a different style. There is another style for "quote" that comes in like this (for some reason I can't indent the sub-bullets as above, but they're supposed to be -- I think you get the idea!):

Heading 1

  • Heading 2

TEXT

  •         Heading 3

TEXT

  •                 Heading 4

TEXT

There is another custom style called something like "text" that controls the formatting for all of the TEXT entries with one key difference: I would like the text to indent according to the bullet it is nested under. I understand that I could have three separate TEXT styles (one for each indent level), but I feel like there must be some automatic option so that all of the entries can follow the same style, but be indented slightly differently.

Any thoughts here?

Thanks for the help!

Word 2007 is not opening on my computer

Posted: 26 Feb 2015 05:31 AM PST

Split from this thread.

ms word 2007 is not opening on my computer, every time i try to open it the error msg is; windows cant access the specified device, path, file. you may not have permission to access it.

this happened all of a sudden idk why. please help.

also windows always crashes on my pc idk why?

i cant open ms word 2007 on my computer

Posted: 26 Feb 2015 05:27 AM PST

Split from this thread.

i cant open ms word 2007 on my computer. whenever i do so it says:

Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item.

Please help !!!

Word trying to be clever stuffing up my formatting

Posted: 26 Feb 2015 05:22 AM PST

Hi guys,

I am trying to use form fields (legacy) in a Word document. And one of the fields is a person's name. Now, I am a university student, because of my course requirements surnames always have to be capitalised. However, Word thinks it's being clever by changing the surname from capitals to first letter capitalisation only; even though I've told it to ignore words that are in uppercase. I have even turned off the option to check uppercase words but it is still doing it and it is getting beyond a joke because I've been through all of the options to do with spelling and grammar but can't stop it from doing it. Anybody have any ideas how to fix this?

Thanks!

Protect Document and Disable the Show/Hide Button

Posted: 26 Feb 2015 04:55 AM PST

I have a document that will be posted on our Intranet at work.  There is one part of the document will need to be hidden to fellow employees but unhidden when the user wants to view the verbiage.  I'm trying to avoid creating duplicate copies, one with the verbiage and one without.

When I hide the text, it works great.  However if someone has their show/hide on, you can see the verbiage.  I want to use the hidden text command and then turn the Show/Hide off and have it stay that way.  When I want to view the verbiage, I want a password to allow that.  I have not been successful so far in accomplishing this task.  Any suggestions?  Is it possible or will I need a macro?

I always appreciate your time and assistance. 

Master Document - Combining multiple large sub-documents in Office 2013

Posted: 26 Feb 2015 03:50 AM PST

I want to combine eight separate WORD documents, each large, containing many embedded photos and charts, (typical file size 150-200 MB), in order to print as a single document with continuous page numbering. I thought the Master Document approach would be the solution, but can't get it to work. Several tests combining just two or three sub-documents, seemed to go well, but as the number/size of the sub-documents increased, so I ran into trouble - WORD either returned an error claiming that a file named ~WRLxxxx dcouldn't be found, or it simply hung. Either way, it was a failure. Reading through previous Community threads on the subject in 2007 and 2010, it seems this has always been a problem area in WORD. Can anyone tell me how I can combine these eight files to print as a single continuously numbered (and ideally indexed - but I can live without that) document. Note that the total size of the eight WORD files is approx. 900 MB).

Thanks in advance for any tips.

Ron in France

Spell Checker

Posted: 26 Feb 2015 03:38 AM PST

I'm translating a document  Heb  > Eng.

Shortly after beginning, I noticed that the spell checker isn't working.

I tried to activate and re-activate the spell checker, at no avail.

When I clicked on "Recheck Document",  to the dialog box  This operation resets the spelling checker and the grammar checker so that Word will recheck words and grammar you previously checked and chose to ignore. Do you want to continue? I answered "Yes".

After opening a dialog box for correcting a Hebrew name, to which I answered with "Ignore", I got the answer that the check for the entire document had finished , and it SKIPPED THE SECTION THAT HAD PREVIOUSLY BEEN MARKED TO SKIP.

So far, I haven't been able to re-activate the Spell Checker.

HELP, please!

TIA

Shmuel

URGENT CANT OPEN MS WORD ON MY COMPUTER

Posted: 26 Feb 2015 03:37 AM PST

i cant open ms word 2007 on my computer. whenever i do so it says:

Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item.

Please help !!!

Table displacing problem - MS WORD 2007

Posted: 26 Feb 2015 02:23 AM PST

SEE IN IMAGE :

Unable to select Drop-Down Form Field options.

Posted: 26 Feb 2015 12:15 AM PST

I have MS Office 2013 installed in my system. In my project i have to work with manipulation of document. When i download the document from the SharePoint site and open it using MS Word, I am unable to select the Drop-Down Form Field(Legacy Forms) values in that document. Is their a way to select the values of the  Drop-Down Form Field(Legacy Forms)  in office 2013. 

Figure and table hyperlinks failed when exported to PDF.

Posted: 25 Feb 2015 07:58 PM PST

All cross-referencing hyperlinks work fine in word document, but when saved as a PDF document the hyperlinks to the figures and tables seemed to not work anymore. It prompted a security warning:

Neither of the security warning options fixed the problem. This only happens to the hyperlinks from the 'List of Figures' and 'List of Tables's table of content, in other words, cross-reference hyperlinks anywhere else worked fine. Any idea how to troubleshoot this?? Thanks.

 

Design Mode Inserting Rows in Table

Posted: 25 Feb 2015 06:27 PM PST

Can someone tell me why I need to go into Design mode to add rows to a table in Word 2013? I didn't think it required that in the past.

Thanks

Gordon

Duplicate Lines of Text at Page Breaks in Word 2010

Posted: 25 Feb 2015 04:19 PM PST

In Word 2010 Home/Student on Windows 7, sometimes Word creates a duplicate line of text at the bottom and top of the page break. These are the regular page breaks automatically generated by Word, not manual page breaks. This happens when text or a blank line on some page above the page break has been added or deleted. It has been happening for a long time, but I ignored it till now. Recently it seems to happen more often.  It is the same problem described in this post  http://answers.microsoft.com/en-us/office/forum/office_2010-word/problems-in-print-layout-view-duplicate-text-stuck/626cc424-2aba-4d7a-9d17-a27988bf5af9 I tried doing what the article linked in the answers to that post suggested, but it did not fix the problem.

Navigate selected Style occurrences

Posted: 25 Feb 2015 04:05 PM PST

In the Styles Pane (not the Styles QAT) are the listed Styles. When I choose the down arrow associated with a particular Style an option to Select All XY Instance(s) appears. This is useful for obvious reasons. However, when the Styles are indeed Selected and the document scrolls to the first occurrence how does one then scroll to the next or previous occurrence? The solution is not in the Find tool because for whatever reason it does not include all Style options within its abbreviated Styles list.

Hmm...

emails w/ attachments not coming through - Microsoft Exchange

emails w/ attachments not coming through - Microsoft Exchange

emails w/ attachments not coming through

Posted: 29 Sep 2008 06:49 AM PDT

This should explain it.
http://www.exchangeinbox.com/article.aspx?i=75



"maitakeboy" <microsoft.com> wrote in message
news:com... 

Exchange Server Compatibility

Posted: 28 Sep 2008 11:43 PM PDT

Naveen <microsoft.com> wrote: 

Hi - you'll get a lot more help in here if you don't ask people to go
googling to look up RFCs. Just post your question in natural language :)

is there a way to monitor used abuse of forwarding junk around the office?

Posted: 26 Sep 2008 12:50 PM PDT

That's YOUR fault!
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

"Susan" <nospam.com> wrote in message
news:Oqrbc%phx.gbl... 

Exchange 2003 Outage Issues

Posted: 26 Sep 2008 10:47 AM PDT

I will take a look and see what I come up with. thanks Ed

"Ed Crowley [MVP]" wrote:
 

How to notify users of the result of the mailbox policies run?

Posted: 26 Sep 2008 09:53 AM PDT

I don't believe that there is an option to notify users that the policy has
taken action. Outlook 2007 does show the Managed Folder's policy settings
under the folder name in the message list.

Missy

"SammyBar" <com> wrote in message
news:eWRCkh$phx.gbl... 

Some email not received

Posted: 25 Sep 2008 10:51 PM PDT

Thanks for the suggestion Ed,

They figured out it was their SPAM server goofing up the reverse DNS along
w/ some other things. But I really like your idea. Never thought about it.

"Ed Crowley [MVP]" <net> wrote in message
news:phx.gbl... 

Bad page link error

Posted: 25 Sep 2008 04:34 PM PDT

I did, they said to post here because it's an Exchange issue.

"Ed Crowley [MVP]" wrote:
 

Exchange 2007 Managed Content Settings Exclude sub folders

Posted: 24 Sep 2008 03:05 PM PDT

Recycling response from couple of days ago:
-----

In Exchange 2003/2000, the Mailbox Manager does not apply policies to
sub-folders unless you explicitly specify this. This allows users to easily
sidestep the organization's retention policies by simply moving items to a
sub-folder.
Applying Mailbox Manager policies to a sub-folder
http://www.exchangepedia.com/blog/2007/01/applying-mailbox-manager-policies-to.html

In Exchange 2007, Managed Folders are more compliance-focused. Managed
Content settings are applied to a Managed Folder (custom or default folder)
and all its sub-folders.

The workaround is to move messages to a Managed Folder which has different
Managed Content Settings or an "unmanaged" folder.

--
Bharat Suneja
Microsoft Corporation
blog: exchangepedia.com/blog

This posting is provided "AS IS" with no warranties, and confers no
rights. Please do not send email directly to this alias. This alias is for
newsgroup purposes only.
----------------------------




"Ed Crowley [MVP]" <net> wrote in message
news:phx.gbl... 

Exchange 2003, Outlook 2007 OAB Sync error - 0X8004010F

Posted: 24 Sep 2008 10:23 AM PDT

Have tried on each new machine multiple new profiles, deleting OAB files but
everytime I get this error on any newly joined machine. On a migrated
machine I can create any new profile and all users work. It is definitely
linked to some rights or something that is not getting created when I join a
new machine to the network.

"Ed Crowley [MVP]" wrote:
 

Attachments in OWA - WP

Posted: 24 Sep 2008 06:39 AM PDT


Thanks for your input.

This happens to many docs for that user.

message created via OL - Exchange 2003 SP2



"John Fullbright" wrote:
 

Does exmerge still have 2G limit for Exchange 2003?

Posted: 23 Sep 2008 07:00 AM PDT

Thanks for the update. Looks like Exchange 2007 now has a brand new tool for
exporting mailboxes >2G



"John Fullbright" wrote:
 

Why can't ext4 file systems be used as a boot partition? - Forums Linux

Why can't ext4 file systems be used as a boot partition? - Forums Linux

Why can't ext4 file systems be used as a boot partition?

Posted: 17 Sep 2009 10:21 PM PDT

Hans-Peter Diettrich wrote: 

yerrss.. I thought about that, but the boot LOADER - grub, lilo or
whatever, simply resides in the boot SECTOR, which isn't really a file
*system* at all.

So teh sequence is

Bios loads boot sector and jumps to execute into it.
Boot code takes over and loads splash screens and ultimately the kernel
and enough OS to bootstrap the rest.

So its really down to whether or not the boot loader understands the
disk .. and sometimes it dont..and booting fails!


 

Dont see any really.
 

How to properly manage a custom profile?

Posted: 17 Sep 2009 11:53 AM PDT

Sidney Lambe wrote:
 

Idiot

And an apology to the "real idiots" who might be offended by comparing
that cretin to them
--
You're not my type. For that matter, you're not even my species

Font problem xorg applications in Fedora

Posted: 17 Sep 2009 09:48 AM PDT

Actually turned out to be a LOCALE issue. My locale was set
for UTF8 and most fonts don't support this apparently

Ian

The Natural Philosopher wrote: 

swap file vs swap partition

Posted: 16 Sep 2009 11:18 PM PDT

Hi,

I would like to share some difference between swap file and swap
partition.

Swap File,
1. If the hard disk is full or corrupted,swap file will get damaged.
2. System speed get decrease as soon the hard disk space is full.
3. It should be on a particular location where it should not get
damaged or accidentally copied with other files.
4. It have advantage to increase the swap space on a system that have
already installed with linux.
5. In any case if we need to increase the swap space of the system
immediately we can do it.
6. We can able to create and keep the swap file on external device eg:
Express Card SSD
7. New kernel have nearly achieved to make both swap partitions and
swap file speed closer.
8. Swap file will get fragmented.

Swap Partition
1. Reside on a separate hard disk space.
2. Multiple Os on a single machine can share the same partition.
3. Fragmentation is less compare to swap file.
4. If hard disk is corrupted the swap partition would not be
functioning.
5. Reduce accident loss or corruption.

*Choice depend on the type of activity we are doing on the system.
Increasing Ram will increase the speed of the machine than the swap
system. But product price will be high.

Cheers!
Melbin Mathew
www.talk2melbin.com



On Sep 17, 2:18am, celsius thomas <com> wrote: 

renaming of /tmp partition. Any adverse effect on OS

Posted: 15 Sep 2009 12:22 AM PDT

On Sep 15, 4:33pm, Aragorn <invalid> wrote: 

Thanks everybody for sharing your views.

The applications running under FreeBSD consider /home/app as the root
file system and we have a similiar layout like / under /home/app .
Directories like /tmp , /log , /bin , /etc are also
available under /home/app where these applications read and write . We
are not running any well known Internet services so we are not facing
any issues on the functioning of OS. These
FreeBSD hosts are being used for running our native applications.
 

We can use rsync with archive mode option to copy the contents from /
tmp to /home/ so all file systems permissions,ownerships etc will be
preserved 

Finally , I did the changes for moving /tmp to /home/ in Linux
without having any effect on the normal functioning of OS .
Applications which are failing are also running fine after the
changes. I rebooted
one host to check whether everything is fine or not. Everything looks
fine as of now. One bad thing I did during this change is that I
rebooted one Linux host as I was not able to unmount the
/tmp file-sytem using the umount command . But next time for other
hosts , I tried a lazy unmount which helped me to unmount /tmp without
reboot.

The setup now looks as follows.

===
df -h /tmp
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/sys-home 440G 1012M 416G 1% /home
--
ls -ld /tmp
lrwxrwxrwx 1 root root 10 Sep 15 03:55 /tmp -> /home/tmp/
ls -ld /home/tmp
drwxrwxrwt 7 root root 4096 Sep 16 03:10 /home/tmp
===

Thank You to All
Zaman

FC11 recompiling kernel: fail on kernel-firmware dependency

Posted: 14 Sep 2009 01:44 PM PDT

On Sep 14, 9:44pm, "K.A." <net> wrote: 
[snip]
 
[snip]
 
rpm does not dependency checking. What happens is that in the scripts
it runs in the rpms
being installed, it checks to see whether any dependencies are listed
and installed only. It
makes no attempt to fixed these if problems occur. yum will attempt to
satisfy dependencies.

From the listed rpms above, you will need to add the kernel-firmware
as well so the following
should work:

$: rpm -ivh ~/rpmbuild/RPMS/x86_64/
kernel-2.6.29.4-167.hpfs.fc11.x86_64.rpm ~/rpmbuild/RPMS/x86_64/kernel-
firmware-2.6.29.4-167.hpfs.fc11.x86_64.rpm

IOW, install both rpms at the same time.

HTH
ne...

2.6.x kernel on CentOS 3.9 (how??) RPM and source fail.

Posted: 12 Sep 2009 11:28 AM PDT

September Storm wrote: 

If you have built the kernel from source and nothing else, I'm surprised that
your CentOS works at all, as the system needs different module-init-tools and
mkinitrd and some changes in the init rc script.
I do suggest you try to find some RedHat8 howtos about the kernel update,
myself I did use those when I still was using RedHat7.3.

You must update the module-init-tools to a newer one, as you can't use the
same binary to load kernel 2.6 modules as for loading kernel 2.4 modules.
Keep in mind that the RPMs only will provide you with either 2.4 or 2.6
compatible binaries (there are some distributions that supplies both).

mkinitrd works in different way too, there are some broken versions, so pick
the right one. If I remember it right, a 2.4 module ends with .so while a 2.6
module ends with .ko.


If you really want to make a kernel from SRPM without the dependency, then
update the spec file so it don't contain the dependency requirement, but I do
suggest you do update module-init-tools and mkinitrd.

Not sure which compiler centos 3.9 uses, but back in those days RedHat had
always a quite experimental compiler and I remember that developers didn't
care about bugs reported from RedHat users who had compile errors as those
where from the experimental and broken compiler, this could be the cause for
your problem too.


You can always disable the CONFIG_DEBUG_SECTION_MISMATCH option to see if that
makes a difference.



If you want to make it easy, just upgrade or make a fresh install instead of
making own packages, as you will need to install new kernel-headers and then
rebuild glibc and I wouldn't be surprised if you would need to upgrade glibc
to build correctly, then you need to upgrade gd (it's a round dependency, so
you need to make a glibc without the gd support, then update gd, then make a
glibc with the gd support enabled), you may run into you need to update gcc
too and in the end you will have updated like 20-30 heavy packages to get the
system updated enough to get the benefit of running the 2.6 kernel.

Be happy that you won't try to include gnome2 to RedHat7.3, that was a big
job, took me some weeks, I got a so so dependency map from one of the gnome2
developers who happen to work for RedHat.


-- //Aho

Installing gnome-system-tools package wants to remove my installed

Posted: 01 Sep 2009 06:50 AM PDT

On 9/12/2009 9:44 AM PT, John Hasler typed:
 

Or Symantec, but that wouldn't make any sense. :D

 

I double clicked on gnone-system-tools package after searching and it
said to remove gnome and gnome-network-admin. It also said I have
v2.22.1-5 for the installed one and the latest is v2.22.2-1 (wow very
small changes).

It looks like apt, aptitude, and synaptic all agree the same thing on
dependencies.
--
At length, when they came to a (lowly) valley of ants, one of the ants
said: "O ye ants, get into your habitations, lest Solomon and his hosts
crush you (under foot) without knowing it." --Surah 27. The Ant, The
Ants, line 18
/\___/\
/ /\ /\ \ Phil/Ant @ http://antfarm.ma.cx (Personal Web Site)
| |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net
\ _ / Nuke ANT from e-mail address: netANT
( ) or com
Ant is currently not listening to any songs on his home computer.

Can I use Project on my Pocket PC? Microsoft Project

Can I use Project on my Pocket PC? Microsoft Project

Can I use Project on my Pocket PC?

Posted: 18 Feb 2006 08:17 PM PST

IIRC, you can setup project web server and surf to it from your pocket pc

-----Original Message----- 

how do i find out if i can install winxp

Posted: 18 Feb 2006 11:04 AM PST


Thank you John. Had I known this was suppose to be a professional post I
would have used spell check to correct that 1 error. Pardon me. I also
didn't see on the list anything to do with Windows operating systems. I will
look more thoroughly. Thank you again.
"John" wrote:
 

Is there an exsisting Excel worksheet to input data into Proje...

Posted: 18 Feb 2006 09:25 AM PST

Hi,

For Project 2002 and 2003 there is an Excel Template:

Select File, Save As
Select file type Excel *.xls
In step 2 of the wizard select option Project Excel Template

Add your details to the relevant pages then open in Project:
File Open with file type Excel.

--

Rod Gill
Project MVP
Visit www.msproject-systems.com for Project Companion Tools and more


""Book"" <microsoft.com> wrote in message
news:com... 

Broken links

Posted: 17 Feb 2006 10:07 PM PST


"John" <com> wrote in message
news:microsoft.com... 

I thought that would work too, but I tried "equal to" 0 and it did not work.
Odd that "less than 1" would work when equal to 0 does not...

-Jack

Calculate complete dates

Posted: 17 Feb 2006 04:57 PM PST

Hi,

Using the tracking toolbar, there is a button "Reschedule work". Once you
have entered the % complete, click on that button will split the task at the
percentage complete and reschedule the remaining portion of the task tom
start at the status date.

Hope this helps

Regards
DavidC

"deluth" wrote:
 

Resource moves to part time.

Posted: 17 Feb 2006 01:59 PM PST

Hi Bryan,

You're welcome and sorry for the delay in replying. To answer your
question, if the resource is only available from 7-8 pm Monday through
Friday and 9a-1p Saturday but is available 100% during those hours, I would
change the resource's calendar and leave the maximum units at 100%.

Double click on the resource's name in the Resource Sheet view to show the
Resource Information dialog box.

Click the working time tab to show the resource's calendar.

Click and drag across the column headings for Monday through Friday (M
through F) which will select all Mondays through Fridays for every month.
Change the working time just noting the 7-8pm working hours.

Click the "S" column heading to select all Saturdays. Repeat the edit for
9a to 1pm.

Click OK to close the Resource Information dialog box and you are done.

I hope this helps. Please let us know if you have any further questions.

Julie

"Bryan" <microsoft.com> wrote in message
news:com... 

Why does MS Project 2003 create excess working calendars?

Posted: 17 Feb 2006 01:11 PM PST

Hi mwinebrenner,

Project creates calendars for resources when you add resources to the
project. If you go to Tools > Change Working Time, you will see the base
calendars (usually standard, 24-hours, and night shift) plus the calendar
for each resource.

I hope this helps. Let us know how you get along.

Julie
"mwinebrenner" <microsoft.com> wrote in message
news:com... 

Gantt view with task text information in top half and Gantt chart in lower half

Posted: 17 Feb 2006 11:48 AM PST

Hi Clive,

To add to Rod's post. The Gantt chart you will see in the bottom pane will
only show the bar for the selected task. In a combination view (horizontal
split) the bottom pane data reflects what is selected in the top pane. If
you select all tasks in the top pane, you will see all the Gantt bars in the
bottom.

I hope this helps. Let us know how you get along.

Julie
"Clive" <com> wrote in message
news:googlegroups.com... 

Leveling Issue with MSP

Posted: 17 Feb 2006 07:21 AM PST

Hi Akram,

Try posting on the server newsgroup. Please see FAQ Item: 24. Project
Newsgroups. FAQs, companion products and other useful Project information
can be seen at this web address: http://project.mvps.org/faqs.htm

Mike Glen
Project MVP


Akram wrote: 

Baseline Corruption

Posted: 16 Feb 2006 03:01 PM PST

Hi Stuart,

Whether this is a bug or not, the fact that you move a subtask in that
manner turns the original summary into a real task with 0 hours work but
with 8 hours of baseline work that Project has to account for. I suggest
this sudden extra task will have an effect on the original data as it wasn't
there before! What effect that will have I'm not prepared to spend my time
investigating! It seems a most irrational thing to do! Have you tried
deleting the original summary task it now being redundant?

Incidentally, as you're using Project Server, next time please post on the
server newsgroup. Please see FAQ Item: 24. Project Newsgroups. FAQs,
companion products and other useful Project information can be seen at this
web address: http://project.mvps.org/faqs.htm

Mike Glen
Project MVP








Stuart Penning wrote: 
Subscribe to: Posts (Atom)