Pages

Search

Exchange 2003 server blue-screen rebooting. - Microsoft Exchange

Exchange 2003 server blue-screen rebooting. - Microsoft Exchange

Exchange 2003 server blue-screen rebooting.

Posted: 13 Sep 2007 06:13 PM PDT



"Rich Matheisen [MVP]" wrote:
 

Thanks for the reply.

We're running Windows 2003 R2 with SP2 (it was installed with it). However,
one thing about it being a driver issue is why the error would come up now?
There haven't been any new drivers or hardware changes since probably late
last June.

Prior to setting up this system I had run into into the "RSS" network issue
on another server. I had disabled RSS on this server to get it to work, but
again that was several months ago.

One thing I did see though. When I was making the other changes the
Exchange BPA listed, I had copied the boot.ini from one of our other Exchange
boxes. The only difference is that the one I copied from had the "/NOPAE"
switch. I've removed it from this boot.ini, but it wasn't active at the time
of the first bluescreen so I don't see how it could be the source of the
problem.

This weekend I was planning on doing a driver update and all Windows
"critical" patches, hopefully that will take care of it.

Mike O.

Exchange 2003 Mgmt. Console on Vista

Posted: 13 Sep 2007 06:36 AM PDT

Thanks (dhanya waad) bharat, you suggestion worked like a charm.

"Bharat Suneja [MVP]" <org> wrote in message
news:phx.gbl... 

Dynamic IP

Posted: 13 Sep 2007 04:22 AM PDT

In article <com>,
microsoft.com says... 

Many provides that provide Dynamic IP's also block inbound SMTP, so you
will never get inbound SMTP as long as you have residential class
service.

--

Leythos
- Igitur qui desiderat pacem, praeparet bellum.
- Calling an illegal alien an "undoented worker" is like calling a
drug dealer an "unlicensed pharmacist"
com (remove 999 for proper email address)

Track specific user incoming emails

Posted: 12 Sep 2007 04:16 PM PDT

Thanks John,
I will look at GFI
--
Jon Boyle


"John Oliver, Jr. [MVP]" wrote:
 

Delay and Failure on Meeting Request Updates sent to Exchange 2007

Posted: 12 Sep 2007 03:02 PM PDT

Hmm. Was your friend able to solve the problem and if so, how? I'm hoping
someone has already gone thru this and found a solution.

"Mark Arnold [MVP]" wrote:
 

Autoreply from a distribution list

Posted: 12 Sep 2007 10:51 AM PDT

Sure.

One Exchange 2003 between trusted domains?

Posted: 12 Sep 2007 10:48 AM PDT

Well I guess this answers part of the question. What I mean though is two
different Active Directory domains sharing one Exchange server.? The
allowing in of different SMTP I know can be done but since Exchange uses ADUC
for security I was not sure how it would handle or even allow users from a
different active directory domain to be on the server.

"Mark Arnold [MVP]" wrote:
 

Disater Recovery

Posted: 12 Sep 2007 09:24 AM PDT

Thanks John; your reply is greatly appreciated.

"John Fullbright" wrote:
 

Search entire store on server

Posted: 12 Sep 2007 08:38 AM PDT

Thank you. Can I use the version 3.71 of Exmerge on an Exchange 2000 SP3
with post SP3 rollup on it? I go to the properties of the exmerge.exe file
and it shows version 6.0. Am I missing something? Because the article that
you referenced states that you must use version 3.71.

When I run the find command I come up empty. But when I open the .pst for
my mailbox I can see the test message that I sent to myself to test if the
Exmerge was working. So something is not working right.

Thanks
Benjamin



"John Oliver, Jr. [MVP]" wrote:
 

Message delivery to recipients secondary MX host.

Posted: 11 Sep 2007 12:18 PM PDT

Bump up diagnostics logging on mchangetransport and watch the application
event log.
You can also capture packets to see if all the MX records are being
returned.

--
Bharat Suneja
MVP - Exchange
www.zenprise.com
NEW blog location:
exchangepedia.com/blog
----------------------------------------------


"GAC" <microsoft.com> wrote in message
news:com... 

Avoiding empty ATT*.txt attachments (email sent using SMTP, not from Outlook)

Posted: 11 Sep 2007 02:11 AM PDT

Hi John;

Thx for the feedback.

With

From: "Stephane Barizien" <com>
To: "Stephane Barizien" <com>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary=Message-Boundary-423623539
Subject: Output from: printfiles -D -m sba printfiles.ksh
Date: Fri Sep 14 11:47:29 RST 2007

This is a multi-part message in MIME format.

--Message-Boundary-423623539
Content-type: text/plain; cht="ISO-8859-1"
Content-transfer-encoding: quoted-printable
Content-description: Mail message body

This message is used to transport the output from:

printfiles -D -m sba printfiles.ksh

as an attachment.

P.S. Please ignore any extraneous ATT*.TXT attachment(s).

--Message-Boundary-423623539
Content-type: application/pdf; name="printfiles.pdf"
Content-transfer-encoding: BASE64
Content-disposition: attachment; filename="printfiles.pdf"

JVBERi0xLjQNJeLjz9MNCjMwIDAgb2JqDTw8L0xpbmVhcml6ZW QgMS9MIDQ2NjM2L08gMzIvRSAx
OTUwNy9OIDcvVCA0NTk4OS9IIFsgODM2IDI4MF0+Pg1lbmRvYm oNICAgICAgICAgICAgICAgICAg
[...]
MDAwMDAgbg0KMDAwMDA0MDk0MCAwMDAwMCBuDQowMDAwMDQxNz AzIDAwMDAwIG4NCjAwMDAwNDE3
OTMgMDAwMDAgbg0KMDAwMDA0MTgyOSAwMDAwMCBuDQowMDAwMD QxODY1IDAwMDAwIG4NCjAwMDAw
NDE5MDEgMDAwMDAgbg0KMDAwMDA0MTkzNyAwMDAwMCBuDQowMD AwMDQxOTc0IDAwMDAwIG4NCjAw
MDAwNDIwMTIgMDAwMDAgbg0KMDAwMDA0MjA0MyAwMDAwMCBuDQ owMDAwMDQyMTM1IDAwMDAwIG4N
CjAwMDAwNDU3NzkgMDAwMDAgbg0KdHJhaWxlcg0KPDwvU2l6ZS AzMD4+DQpzdGFydHhyZWYNCjEx
Ng0KJSVFT0YNCg==

--Message-Boundary-423623539



I get the exact same results...

Note: even without application/pdf I have never seen the problem you mention
with attachment security -- maybe because of Outlook's configuration?




John Fullbright wrote: 

Public folder latency

Posted: 11 Sep 2007 02:04 AM PDT

I checked from the users client and he had 2 connections to the european
public folder close to where he is located, then two connections US public
folder servers-

"Mark Arnold [MVP]" wrote:
 

help !! set up NLB with exchange 2003

Posted: 10 Sep 2007 07:14 PM PDT

thank you for your help! the article was very useful but i still have some
questions. is it better to introduce the second exchange server set up
everything and then after set up the NLB or should i set up the NLB first.
will setting up NLB on my current Exchange environment break something? are
there somethings that i should be aware of?



--
ulyses96


"Tzahi Kolber" wrote:
 

wewbe questing about Smart Phone/Blackberry users...

Posted: 10 Sep 2007 11:14 AM PDT

Actually, (at least with Exchange 2003), there is another option for
Blackberry use without getting a complete Blackberry server component. They
make a utility that can be loaded on the users regular office computer,
(that must remain turned on), that will "push" Exchange emails out to the
Blackberry as they arrive at the computer. While this will allow instant
access to emails, (like direct push with WM 5 or 6), the user still has to
physically connect the Blackberry to his computer to synchronize contacts,
etc.

John

"Mike Cook" <com> wrote in message
news:com... 

Outlook 2003 user receives false mailbox size limit messages

Posted: 10 Sep 2007 07:54 AM PDT

It goes to show that too many fingers in the cookie jar is a bad thing. Thank
you fo r pointing that out. I forgot about that but I also never set a limit
there. I have more work to do to figure out who else is trying to do my job.
Thank you for the help.

"JvB" wrote:
 

Outlook Web Access Lost Toolbar

Posted: 10 Sep 2007 05:18 AM PDT

Okay. I thought the basic version still had a navbar, though? I can't say
I've used it much.

Lee.

--
______________________________________

Outlook Web Access For PDA , OWA For WAP
www.leederbyshire.com
email a@t leederbyshire d.0.t c.0.m
______________________________________

"SLP" <microsoft.com> wrote in message
news:com... 

Microsoft Word - Office 2007 How do I sort by date modified and turn off grouping that displays "earlier this month", etc

Microsoft Word - Office 2007 How do I sort by date modified and turn off grouping that displays "earlier this month", etc

Office 2007 How do I sort by date modified and turn off grouping that displays "earlier this month", etc

Posted: 26 Oct 2014 09:31 AM PDT

I have spent 4 hours searching and experimenting with how to solve this and cannot find a solution anywhere.  In Office 2007 I simply want to display files in libraries "Arrange by" in order of date modified with details, but without the grouping headings that read "yesterday" earlier this month" or "earlier this week".  This is useless to me and takes up so much screen space.  In Office 2003 programs (Word, Excel, Powerpoint) this was simple.  I would just select "details" and "date modified" and it would show exactly what I wanted.   When I open Word, or Powerpoint and I click on open files, and it opens "Document Libraries" I want to see files listed in order of recent date modified but without the grouping headings.  Thank you to anyone who can help with this.

Track Changes function thinks I'm two people

Posted: 26 Oct 2014 09:00 AM PDT

I am a copyeditor, which means I use the track changes function all the time. Since I switched to Word 2013 I've had a problem with some documents whereby after I close the document and open it again, the track changes function treats me as a new user. The problem with this is that I often go over any given bit of text several times, potentially making new changes each time, and when the system treats me as a new user, any earlier additions that I later delete show up in the margin as deleted text (rather than simply disappearing).  This is confusing for my clients, who only want to see my final changes and not the history of my train of thought. Of course, I can resolve the problem by rejecting the change instead of deleting the added text, but (a) I don't always remember to do that, and (b) this is still awkward, especially where I rewrite a given bit of text several times, making new additions and deletions each time. Can anyone advise as to how I can alert the system that when I return to a document, it should treat previous tracked changes as still active? I know there must be a way to do this because the problem only arises with some documents. I suppose there is something about the settings in the original document as it is sent to me that affects this, but for the life of me I can't figure out what that is. Thanks to anyone who can help!

i have deleted word. how do i retrieve it. i went back to factory settings on newly bought laptop

Posted: 26 Oct 2014 08:47 AM PDT

i bought WORD on line and then went back to factory fittings on m laptop.  therefore i deleted word but now how do i retrieve it pls ?

Problem with styles

Posted: 26 Oct 2014 03:29 AM PDT

I have a problem to clear styles. I have follow the instructions: Select all the document and go to font in the ribbon and click the clear formatting key but nothing happens. I did not choose the style,  it just came because probably I click a style key.

Will appreciate any suggestions

   

Word 2010 issue with "replace"

Posted: 26 Oct 2014 02:16 AM PDT

Hello from Steved

Hopefully you can solve this situation for me.

The problem I'm having is with this .Text = "3yoX"

It replaces it with "Three Year Old AverageX" but I asking it to replace it with "Three Year Old Best"

It is in a single paragraph.

What is required please to correct this.

Sub Replace_Race_Type()

   Dim rngStory   As Range

     For Each rngStory In ActiveDocument.StoryRanges

      With rngStory.Find

      .Text = "3yoX"

        .Replacement.Text = "Three Year Old Best"

        .Wrap = wdFindContinue

        .MatchCase = True

      .Execute Replace:=wdReplaceAll

      End With

        With rngStory.Find

      .Text = "3yo"

        .Replacement.Text = "Three Year Old Average"

        .Wrap = wdFindContinue

        .MatchCase = True

      .Execute Replace:=wdReplaceAll

      End With

  Next rngStory

End Sub

Thank you

Multiple Alignments within a paragraph

Posted: 26 Oct 2014 12:32 AM PDT

I have a document where the last line of a paragraph is forced to justify (using shift+enter). The line after that I want to center but this isn't happening no more. Before I use to use the style separator to do this but I guess due to new layout formats from Microsoft that isn't possible. Is there any new or better way of doing this?

Thanks.

microsoft word saving documents with a~$

Posted: 25 Oct 2014 07:55 PM PDT

Sometimes when I go to save a document, I find that it has been saved with a ~$ replacing the first 2 letters of what i named the document. it then will not open the document when i try to, stating that there is a problem with the contents. But it saved fine when i did it, or seemed to anyway. Then when I click on the Details button of that error it says the file is corrupt and cannot open. Help! And thank you. 

Office 13 and Word won't run

Posted: 25 Oct 2014 06:21 PM PDT

I'm about ready to strangle this thing. No matter how many times i mess with settings, run the fixit tool, and look for answers, everything comes up short.

My problem is easy to explain. Nothing from office 2013 will start. I double click the icon, or select from start menu, and for a split second the program will show up in the task manager (i.e. "Winword.exe") then immediately close without doing anything.

I can't seem to find anyone else with this specific problem. is there a fix for it?

windows

Posted: 25 Oct 2014 03:28 PM PDT

anable to mopen file

Recent documents

Posted: 24 Oct 2014 05:21 PM PDT

I can go into Word Options and click on Display and in the "Show this number of recent documents" I can change the number to 0, but when I come back later it has reset itself back to 17. Why give the option to change it if it's going to default back to 17?

There are  other who use this computer and I don't want them seeing my recently opened documents!

Help!!!

office 2003 on vista machine - Microsoft Office forums

office 2003 on vista machine - Microsoft Office forums

office 2003 on vista machine

Posted: 20 Sep 2007 04:22 PM PDT



Randy Starkey wrote: 

Yes and they have just released service pack 3 which has some Vista specific
patches

Office 2003 Service Pack 3 (SP3)
http://www.microsoft.com/downloads/details.aspx?FamilyID=e25b7049-3e13-433b-b9d2-5e3c1132f206&DisplayLang=en

Install additional features after initial install problem

Posted: 20 Sep 2007 12:36 PM PDT

see if this helps to enable you to uninstal the retail edition
http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

Then if successfully uninstalled, uninstall the trial.

If you search the groups you will find details of how to manually uninstall
the trial

"Lo" <microsoft.com> wrote in message
news:com... 

Ready to Install Office Home & Student 2007 Edition

Posted: 20 Sep 2007 08:50 AM PDT

Thanks for this information! Have printed it.

"garfield-n-odie [MVP]" wrote:
 

Office SP3 wipes out OE

Posted: 20 Sep 2007 06:25 AM PDT

Hi Cmar,

Outlook Express is part of MS Internet Explorer and the OE program name is MSIMN.exe (MS Internet Mail & News). Usually an Office
update wouldn't remove a portion of Internet Explorer, although it's possible that a shortcut to it could have been 'corrected' if
it was found by the MS Installer to be damaged in which case you might have to do a search for MSIMN.exe to be able to use it.

=============
<<"cmar" <rr.com> wrote in message news:Ok2QRF6%phx.gbl...
I mean that OE was no longer on my system. I luckily did a Restore before
the SP3 update so I was able to reverse the entire installaion of SP3,
getting back OE.
CMA >>

--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Literature from two computers got mixed up

Posted: 19 Sep 2007 01:44 PM PDT

It looks like that will be able to answer the question. Also it appears that
the last five digits of the Product ID are the same as the last five digits
of the barcode on each COA label. Between the two I should be able to sort
things out.

"GreenieLeBrun" wrote:
 

Downgrade office from 2007 to 2003

Posted: 19 Sep 2007 12:02 PM PDT

When they purchased the computer and software, they should have stressed the
fact that they needed 2003.

--

JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375
"bxb7668" <notcom> wrote in message
news:eCA7bDw%phx.gbl... 

How do I find office home and student 2003?

Posted: 19 Sep 2007 10:46 AM PDT

"Anthony miah" <Anthony microsoft.com> wrote in message
news:com... 


You won't get it - 2003 has been superceded by 2007....

given a copy of office 2003 found it was a pirate copy,

Posted: 18 Sep 2007 06:02 AM PDT

"Red6466" <microsoft.com> wrote in message
news:com... 

A common misunderstanding of going back to a previous restore point is
that it only restore the registry and a few other Windows control
files. It does not restore any application, such as Office, files that
were deleted or replaced. You'll need to run the Cleanup utility that
Mary mentions and then reinstall the legal copy of Office.

Brian

product key...please help!

Posted: 17 Sep 2007 03:54 PM PDT


"XS11E" <com> wrote in message
news:0.0.1... 
On comment about using Belarc Advisor in this case is that the product
key that it will probably return is the volume key used by Dell, not
the product key that is assigned to you. Using the Dell volume key
will not work for you to reinstall.

Brian

office 2003 and 2007 on same machine

Posted: 17 Sep 2007 12:38 PM PDT

Don't know yet. Haven't done the install. Will soon.


"Gilles Vollant" <com> wrote in message
news:OL9OJR2%phx.gbl... 

How to replicate the same Office installation

Posted: 17 Sep 2007 07:31 AM PDT


Look at KarenWare, she has some nifty utilities you might find useful.
http://www.karenware.com/powertools/powertools.asp

--
Mary Sauer MSFT MVP
http://office.microsoft.com/
http://msauer.mvps.org/
news://msnews.microsoft.com

"the gladiator" <com> wrote in message
news:com... 

No icon for *.doc files

Posted: 17 Sep 2007 02:25 AM PDT

Thanks JoAnn,

I found a way to change icon. The problem happens because of remains of
Microsoft Office 2003.

I changed icon via "Folder Options" -> "File Types".
There is a possibility to change icon for specific file types.

The problem was because there was set path to deleted file with icons

C:\Doents and Settings\ProfileName\Application
Data\Micorosoft\Installer\(90110409600-11 D3-8CFE-01 5O048383C9}\pptico.exe



A provided the same file name as for *.docx doents and this solved the
problem.

Best Regards,
Konstantin


"JoAnn Paules" <com> wrote in message
news:eVBJG1g%phx.gbl... 

How to create bookmarks from MS "Save as PDF" add-in?

Posted: 16 Sep 2007 09:39 PM PDT

On Sep 17, 1:15 am, "Graham Mayor" <org> wrote: 

Cheers mate. Work like a charm.

Actually, if you only want bookmarks for the final PDF output, you
don't have to add bookmarks one by one manually in Word on behalf of
all the headings in the doent. Just add a dummy bookmark anywhere
and delete it right away. Kinda kick start its "bookmarking instinct".
After that, whenever you start out to save it as a PDF file, the
options window allows you to create bookmarks from headings. The add-
in takes care of the hassle of generating and linking the bookmarks
duly for the resultant PDF doent, even though no bookmark has been
added explicitly to the parent Word doent.

Isn't that cool or what?

how to turn off end user agreement

Posted: 16 Sep 2007 04:52 AM PDT



"garfield-n-odie [MVP]" wrote:
 

Office 2007 on VISTA Home Premium

Posted: 16 Sep 2007 01:55 AM PDT

Forget the message below, the file is present, I just could not see it.

PWS



"Paul W Smith" <twelve.me.uk> wrote in message
news:ex1MPFE%phx.gbl... 

Unable to install MS Office Pro 2003 due to an invalid key error

Posted: 14 Sep 2007 08:26 PM PDT



"Ben M. Schorr, MVP" wrote:
 

installer cannot update 1 or more protected windows files

Posted: 14 Sep 2007 01:20 PM PDT

Then call unless too late; provided ms tech support info on when to callback
tomorrow. Gotta to get back to my studies.


Followup-To:

On 2007-09-15, student <edu> wrote: 

Can't find and uninstall pre-release version for Microsoft Office

Posted: 14 Sep 2007 01:18 PM PDT

Do you have any Office 2007 beta products in Add/Remove? How about Expression Web Designer? Any of the office tools like the .pdf converter?

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
reading.

After furious head scratching, pnaycutie04 asked:

| I went to this website and found how to remove Microsoft Office
| Professional Plus (Beta) version. But, I thought I removed it until I
| put in my Microsoft Office Home and Student 2007 CD to install.
| However, this error pops up again saying I need to uninstall any
| pre-release version of Microsoft Office 2007, still. Can you help me
| please? Because I tried calling Dell and called Microsoft's customer
| representative but was unable to help me with the technical support.
| Thanks

Installing Office 2007 via gpo

Posted: 14 Sep 2007 06:18 AM PDT

Hi Stacy,

GPO deployments basically don't use .MSP files, so you'll need to go with a different approach using config.xml files and or scripts
to pull in your changes rather than using the new Setup.exe /Admin feature.
There are some details on doing this in the MS Office 2007 Resource Kit available through http://microsoft.com/office/ork


========
<<"srd" <microsoft.com> wrote in message news:com...
I clicked on the link you provided and it is unavailable for some reason.

I am using the setup.exe /admin command to customize the MSP file. Then I
run the setup.exe on my test PC. It works and I have installed Office 2007
Std with all updates using this method.

The problem that I seem to be having is that I want to include the PDF
add-in in the installation but it is a MSI file instead of MSP and it doesn't
install.

I also tried adding the .msi and .cab file to the customization file to
install after Office but that doesn't work either. Any ideas?
--
Stacy >>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

What causes MS Office files to save as name.docx

Posted: 13 Sep 2007 06:56 PM PDT

In article <#phx.gbl>,
org says... 

While you might be able to name a few reasons to run Office 2007, there
is no ROI for it and little reason for the majority of the world to move
to it. Since few businesses or individuals use more than 15% of the
features available and since I have already installed Office 2007 on 30
machines here, I can honestly say that it's decreased productivity,
slower on every machine that was running Office 2003, offers nothing to
any of the 2500 clients we've asked.

So, while I don't speak for the world, for those that don't see the
benefit of 2007, it's completely rude to use a doent format that
others can't work with, and it's a given the more people have DOC than
DOCX ability. Most people that have a clue would ask about the format
before sending doents.


--

Leythos
- Igitur qui desiderat pacem, praeparet bellum.
- Calling an illegal alien an "undoented worker" is like calling a
drug dealer an "unlicensed pharmacist"
com (remove 999 for proper email address)

Install Popup problems

Posted: 12 Sep 2007 12:24 PM PDT

Thanks for the response. I was not able to fix the problem with the install
CD nor was I able to uninstall through add/remove programs. I was able to
solve the problem by using the "Microsoft Installer Cleanup" application.
Worked like a charm.

Thanks again,
Dave

"DL" wrote:
 

MSOffice 2003 on W2K3 Terminal Server Question...

Posted: 12 Sep 2007 10:18 AM PDT

back in office2000 i think there was a terminal server specific install (for
the AIP anyways), but they did away with that in officexp (and higher i am
guessing).

--
http://abeNd.org - Novell News for IT Professionals
-
"Michelle" <microsoft.com> wrote in message
news:com... 

Trial Download

Posted: 12 Sep 2007 03:38 AM PDT

I thought so. I think when i look back on it, i may have clicked run instead
of save, so not sure what happened. Looked in my temporary internet folder,
but nothing there.

Since I cant downnload anymore, presumably I have to buy.
--
Peter Scaramanga


"Gordon" wrote:
 

Cannot uninstall Office 2007 Trial - but installed Standard versio

Posted: 11 Sep 2007 08:06 PM PDT

Further to my earlier message, I tried reinstalling Office 2007 standard, and
works fine do far, though I am not convinced the problems will go away. I
tried uninstalling the program through add/remove, and now the error message
is "setup could not find any available products to install."

Thoughts on what is next?

Thanks,

Richard

"RN" wrote:
 

Trying to install Office 2007 Ultimate

Posted: 11 Sep 2007 05:08 PM PDT

I'll look and see, and once again, thank you very much for your replies!!

"DL" wrote:
 

Microsoft CRM - Accessing the CRM datamodel

Microsoft CRM - Accessing the CRM datamodel

Accessing the CRM datamodel

Posted: 24 May 2005 10:12 AM PDT

this will help

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/crmsdk1_2/htm/v1d2microsoftcrmversion12sdk.asp

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"Tony G" <com> wrote in message
news:googlegroups.com... 

Users Missing from Active Directory

Posted: 24 May 2005 07:20 AM PDT

Here's how:-

On the Windows 2003 server cd there is a Support Tools install that can be
installed on the Ad machine.
1. Once you have this installed go to (Start | Programs | Windows 2000
Support Tools | Tools | ADSI Edit).

2. Expand Domain NC (domain name).

3. Expand DC=domain controller name.

4. Expand CN=Users.

5. Find the user that is not showing up. Right click on the user and choose
properties.

6. In the properties window under the Attributes tab click on the drop down
for Select a property to view and choose userAccountControl.

7. This will give you a Value number.

8. Take a look at this microsoft KnowledgeBase article 305144
<http://support.microsoft.com/default.aspx?scid=kb;en-us;305144> to find out
what that number means.

If a password is not required for the user then that could be one reason why
the user is not showing up.

9. From within ADSI edit you can change the value of the user. A value of
512 means normal user. This user would then show up in User Manager. Compare
the values with the users that do show up.

Note - When changing the userAccountControl you are changing the settings of
the user so please be careful when making these changes

It can probably be scripted to do bulk updates - but don't ask me how!

Peter

"peteroddan" <co.uk> wrote in message
news:com... 

New Leads

Posted: 24 May 2005 02:41 AM PDT

Hi Matt,

Thanks so far, now the next problem appears... When I safe the changes they
do not appear in the excisting and even the new leads. I even tried to make
changes in a form that is never been used in our company, the results where
the same.

Any thoughts how to solve this?

Mario

"MattNC" wrote:
 

Data Migration Framework Question

Posted: 23 May 2005 07:33 PM PDT

Hi Richard,

The best tool I know to insert or update information is Scribe. It really
easy to use if you already comfortable with SQL server. You can have
different type of licences 45 days or complete licence.

Sisi

"Richard" wrote:
 

Global Search

Posted: 23 May 2005 12:42 PM PDT

If you need more advanced searching options then check out www.c360.com.
They have written a more advanced search tool which even lets you save
queries. I do not know whether it will search across the entire system but
it is worth a look. Hers is the link

http://c360.com/SearchPac.aspx

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"Bobby" <microsoft.com> wrote in message
news:com... 

Internet Explorer shuts down when log in CRM

Posted: 23 May 2005 11:05 AM PDT

You need to disable pop-up blockers (Google, MSN or Yahoo toolbar) or IE6 in
XP SP2 pop-up blocking.
--
Matt Wittemann
http://icu-mscrm.blogspot.com


"Hotwheels" wrote:
 

Multi-Currency Support in v2.0

Posted: 23 May 2005 09:56 AM PDT

This ISV can help you! Our Quick Quote and Product Configurator
solutions help you control just about any type of pricing scheme from
MS CRM - including currency conversions, tax and freight, etc. See
www.experlogix.com for more info.

Best,

Jeff Holway

Ryan Finnesey wrote: 
[mailto:com-nospam] 

Ability to use customized fields within the merge/word templates

Posted: 23 May 2005 07:17 AM PDT

If you are searching for a solution for this problem.
Try our WordMailMerge Add-On.
This allows you to make mail merge with all fields and also custom fields.
You can download a trial at www.mscrm-addons.com


Christian
___________________________________
com
www.mscrm-addons.com
Your company for MS-CRM ADD-ONS!
GroupCalendar for MSCRM
Related Doents for MSCRM
WordMailMerge for MSCRM



"jbutler" <microsoft.com> schrieb im Newsbeitrag
news:com... 

Failing to add string to account entity using deployment manager

Posted: 23 May 2005 07:15 AM PDT

The 6000 byte limit only aplies to whether or not the full record can be stored
in the conflict tables. You can go beyond 6000 bytes with CRM with tion
enabled.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Wed, 25 May 2005 01:50:15 +0100, Julian Sharp <sharpuk.f9.co.uk>
wrote:

On Mon, 23 May 2005 07:15:18 -0700, "Leslie Greenhalgh"
<microsoft.com> wrote:
 

There is another lower limit and it is to do with tion for SFO
clients. SQL Merge tion has a limit of arund 6000 bytes and
there is a limit of ~250 columns.

I hitt similar problem on Account at around 6000 bytes so you may have
reached this limit.

If you are not using SFO offline you can disable publishing and
tion and then can use upto 8000 bytes

One tip for reducing the amount of bytes used is to use Memo fields
which only use 16 bytes instead of strings



Julian Sharp
Vigence for MS CRM in the UK
See my MSCRM blog http://spaces.msn.com/members/mscrm

2 Formatting Questions - Currency and Dates

Posted: 23 May 2005 06:42 AM PDT

Currency

You are definately not the only one asking for multicurrency support. Today
you could achieve multicurrency in reports (in theory) however with the next
release of CRM. However right now any talk of the next release features etc
is speculation until Microsoft locks down the specs and publicy announces
them. Keep watching this group as we'll post when we know publicy available
information

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"Carroll Little" <com(donotspam)> wrote in message
news:com... 
currently 

Setup failed - Crm 1.2 italian

Posted: 23 May 2005 05:51 AM PDT

About the framework I have installed the latest update and asp.net is already
installed. Win share point working fine. During the installation I have
checked the same security account "local system" for Microsoft CRM, Crystal
Enterprise, and ASP.NET.

Have you other suggestion?

"Rob Bakkers" wrote:
 

Cannot promote email to CRM record and select regarding case

Posted: 22 May 2005 08:34 PM PDT


You can either cut-and-paste -or hack the XML

(Its called Sales for Outlook for a good reason. Its not Customer Service
for Outlook, unfortunately, though we hope the Outlook client will have more
customer service features in future)



"Biyoojok" <com> wrote in message
news:googlegroups.com... 

CRM - Action Pack - Cannot install

Posted: 21 May 2005 10:25 PM PDT

I have not done this myself. From what I understand, there should be some
paperwork in your Action pack materials. You can also try searching hte group
via Google as it has been asked and answered many a time in the past.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Mon, 23 May 2005 08:24:02 -0700, "Dan Kuhlman"
<microsoft.com> wrote:

Do you have a link or phone number for me to get this process started? Thx

"Matt Parks" wrote:
 

Visibily of objects in ListViews

Posted: 20 May 2005 08:09 AM PDT

Thanks a lot Dodd!
My concern was that I want my users to be able to see, in the ListView, all
the Cases that may exist for a given Account or Contact, but be able to open
(I mean, with double-click) only the ones that they own. I understood that
this is the way CRM works, in fact.
Thansk again!
Mathieu.


"Dodd" <microsoft.com> a écrit dans le message de news:
com... 
Subscribe to: Posts (Atom)