Pages

Search

Move Mailbox Recomendations - Microsoft Exchange

Move Mailbox Recomendations - Microsoft Exchange


Move Mailbox Recomendations

Posted: 11 May 2005 08:30 AM PDT

then you should be OK to move them all in large groups...
"Fred Yarbrough" <com> wrote in message
news:phx.gbl... 
Transaction 
of 
one 


Mailbox management policy: runs only one of three policies

Posted: 11 May 2005 05:31 AM PDT


But I thought MM policies would run in a sequence, one after another -
according to their priority. Isn't that supposed to be like that?

ypal



"Andy David - MVP" <com> ???????/????????
? ???????? ?????????: news:com... 
Recipients -- 
resides 
the 
other 


WHY EXCHANGE???

Posted: 10 May 2005 03:02 PM PDT

If you're already running Exchange it seems to me that the client should be
the one who has to make the case for changing.

-GT
"neomodo" <microsoft.com> wrote in message
news:com... 


OWA Access for 2nd Exchange 2003 Server

Posted: 10 May 2005 10:27 AM PDT

Nope. Looked at that already. The knowledge base has nothing on this.

Sylvan Jonas

"Leif Pedersen [MVP]" <dk> wrote in message
news:phx.gbl... 


Exchange issue with Outlook 2k3 outbox

Posted: 10 May 2005 08:43 AM PDT

Not sure I understand. Do you mean anyone sending mail to a mailbox that is
not on the cluster or do you mean when connecting to a mailbox with outlook
that isn't on the cluster and sending and receiving with that mailbox? I did
receive a response from a seperate post regarding Firewall issue, I turned
off the Windows Firewall and everything sped up. I was then confused on why
when connecting with a 5.5 mail server we didn't see these problems, but when
connecting to a 2k3 server we did. Different ports maybe?

Thanks for your help,
Jeremey

"Todd J Heron" wrote:
 

5.5 - 2003 Emailing public folders

Posted: 10 May 2005 12:01 AM PDT

Hi,

The problem may be caused by that Categorizer recognized the email address of
the public folder as an outside E-mail address, then it passed it to SMTP virtual
server for outgoing routing. Apparently, this causes an NDR since this address is
not available in internet. So the root cause may be that public folder hierarchy
has not been completely synced to the Exchange 2003 server.

We can try this step first:

Open ESM 2003, open the properties pane of "Mailbox Store" in Exchange 2003
server, and set the default public folder store to the store on Exchange 5.5
server. And then check the issue again.

If now you can send to the public folders, then we can narrow down the problem
as a public hierarchy replication issue.

Hierarchy replication events occur every 5 minutes. If sending a message to a
Public Folder that resides on an Exchange 5.5 server, you must install and
configure a Public Folder Connection Agreement.

281223 Understanding Connection Agreements in Exchange
http://support.microsoft.com/?id=281223

1) Using the information above, apply this to your environment and determine
where the message should be routed.

2) Send a test email to the Public Folder in question.

3) Send a test email to the Public folder store where you expect the message to
be delivered.
Example: com
To locate the email address of the Public folder store, locate the ProxyAddress
attribute of the Public Folder store using ADSIEdit or LDP.

4) If you still encounter 5.1.0 error code, please refer to this KB article:
290204 XCON: 5.1.0 NDRs When You Send from Exchange 2000 to Exchange
Server 5.5

http://support.microsoft.com/?id=290204

5) Gather more information using the Event Viewer and Diagnostic Logging (set
on the properties of the Exchange server within ESM)
Set the following to maximum:
For Hierarchy Replication -
Services: MSExchangeIS\Public Folder
Categories: All Categories

For Mail Flow -
Service: MSExchangeTransport
Categories: All Categories


6) If the test message is sitting in the local delivery queue, look for errors or
warnings in the Application log.

821910 How to troubleshoot for Exchange Server 2003 transport issues
http://support.microsoft.com/?id=821910

Hope the info helps.

Regards,

Pat Cai
Microsoft Online Partner Support


550 sometimes but not others

Posted: 09 May 2005 02:59 PM PDT

Yes. It is possible.

Sounds like there is an issue at the end he is sending too. Often in my
experience secondary SMTP servers at ISPs are misconfigured to reject email,
maybe the 550 is happening when the sending server switchs to a secondary
mail server.

Mal Osborne
MCSE MVP Mensa

"bobk" <com> wrote in message
news:phx.gbl... 


Recovering email stored on crashed Exchange?

Posted: 08 May 2005 09:03 PM PDT

I'd love to rebuild the server. However, the first step is to add NNTP
to IIS. This fails, with the "Overlapped I/O operation in progress."
error message. I've found nothing that gets me past that error, and
Excahnge won't install if NNTP has not been installed. I'm stuck!

None of the commercial programs you mentioned are feasible from a cost
viewpoint. PowerControls lets me see the messages without problem, and
other than having some historical value, there were no pending things
that these emails were critical to.

On Sun, 8 May 2005 18:38:15 -1000, "Jim McBee [MVP Exchange]"
<spambegone.net> wrote:
 

PeterD, the Darkstar Network
To email, fix my address!
ExpertZone!

E2K3 - messages delivered to wrong mailboxes

Posted: 07 May 2005 05:37 AM PDT

Hi Gary

Based on your very helpful information, I did a bit of digging. It would
appear that what I need is the envelope journaling functionality in E2K3 -
this will allow me to read every P1 header (envelope) for every mailbox that
I wish and then evaluate them at my leisure
(http://www.msexchange.org/tutorials/Implementing-Exchange-2003-Message-Journaling.html)

There is a performance hit, but it is acceptable for my needs and volume of
email. I think this is the correct approach, if not, please let me know
your thoughts.

Thanks

"Gary McDonnell" <com> wrote in message
news:phx.gbl... 


smtp Virtual server share address space Help!

Posted: 07 May 2005 05:05 AM PDT

On Sat, 7 May 2005 14:05:03 +0200, "Guy P." <co.il>
wrote:
 

As I understand it you can't deploy a 2nd SBS into a pre-existing SBS
Forest. I'f I'm wrong then you would simply install the server and
Exchange into the organisation and you'd be able to move the mailboxes
and balance the load around. You wouldn't need to try and configure
Exchange.
If I'm right then you can use SBS to deploy the SQL and Windows
standard with Exchange standard or enterprise for the Exchange. Once
thing I do know is that you can have additional member servers with
retail Exchange in an SBS Forest.
That would seem to be the more cost effective of the solutions.

Can't see why you'd want to cludge it up and have two SBS Forests.
Sounds like a total PITA

no OWA account

Posted: 06 May 2005 09:16 AM PDT

On Fri, 6 May 2005 13:42:01 -0700, "jojo"
<microsoft.com> wrote:
 
If HTTP is definitely enabled then check the user rights on the
account. Perhaps he can't log on to the server concerned. What
differences are there between his and another working account?

Microsoft Works - streets and trips 2006 ess. download problem

Microsoft Works - streets and trips 2006 ess. download problem


streets and trips 2006 ess. download problem

Posted: 23 Jan 2006 12:12 PM PST

It is great to read you were able to solve the problem.

Thanks for the reply,
Ken

"jmhscout" <microsoft.com> wrote in message
news:com...

| thanks the second link helped
|
| "Ken" wrote:
|
| > Click here to view the other post....
| >
http://groups.google.com/group/microsoft.public.streets-trips/search?q=Error+1402&start=0
| >


Converting a WORKS files into WORD 2000

Posted: 23 Jan 2006 09:51 AM PST


"JenniferRADIO" <microsoft.com> wrote in message
news:com...
 

From your home computer, save the file in Rich Text Format, or in any of the
Word formats (not Macintosh) or any of the Word Perfect formats.




Sort or Reorder Projects

Posted: 20 Jan 2006 06:49 PM PST

This does not seem to be a very good way of accomplishing it. Is there a
registry entry or a file that can be edited to sort projects by name or to
reorder them. If not this would be a very useful change in a future update
of Works.

"Kevin James - MSMVP Works" wrote:
 

works 2000 Word Processor wont open

Posted: 20 Jan 2006 10:44 AM PST

Hi Gogs,

Perhaps this help?

You receive a "WKWPAC.DLL" error message when try to
use the Word Processor module in Works
http://support.microsoft.com/?kbid=873211

HTH,
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works & Word) 1999-2006
Works Help & KB Links: http://www.btinternet.com/~kevin.james1/WorksFAQ.htm





"Gogs" <microsoft.com> wrote in message
news:com...
| Tried this today but it made no difference - still the exact same fault
|
| "Gogs" wrote:
|
| > Hi Ken,
| >
| > Just found this tool - will try it today.
| >
| > Thanks
| >
| > "Ken" wrote:
| >
| > > Hi Goden,
| > >
| > > The only thing I can suggest is you try using the cleanup utilities.
| > >
| > > Cleanup Utilities info can be found here......
| > >
| > > http://support.gateway.com/s/SOFTWARE/MICROSOF/sHARED/7513181faq24.shtml
| > >
| > > Hopefully they will remove the corrupt item and allow a clean install.
| > >
| > > Good luck,
| > > Ken
| > >
| > > "Gogs" <microsoft.com> wrote in message
| > > news:com...
| > >
| > > | Can't open Word processor on Works 2000 / windows 98se.
| > > | get Error message "wkswp caused an invalid page fault in wkwpac.dll".
| > > | I have tried the knowledge base article on this but it doesn't fix it.
| > > | Have uninstalled Works and re-installed but no good either. I have
also
| > > | reloaded windows over the top of cuurent installation but still no
good.
| > > | HELP!!! please.
| > > | Gordon
| > >
| > >
| > >



Help With Graphing

Posted: 19 Jan 2006 11:38 AM PST

Thanks so much for your help.
I also figured out that you could change the frequency that the horizontal
axis is labeled. So, I'm able to use the other chart patterns now and get a
nice date display.

"Kevin James - MSMVP Works" <org> wrote in message
news:phx.gbl... 


auto safe

Posted: 17 Jan 2006 01:06 PM PST

ow that's a pity, thanks anyway.
greetings suzanne

"Kevin James - MSMVP Works" wrote:
 

OT - Ken - Gateway computers

Posted: 17 Jan 2006 05:48 AM PST

thanks.

DavidF

"Ken" <ne> wrote in message
news:phx.gbl... 
Do 


microsoft works calendar loads funny

Posted: 16 Jan 2006 11:00 PM PST

What computer make and model do you have? Is it by any chance an Acer
computer?

Darcus

AutoCorrect Erro

Posted: 16 Jan 2006 04:56 PM PST

There is an autocorrect list somewhere in your machine which stores the
replacements corrosponding to misspelled words. Somehow skbeaird@ has
a replacement which is :Scabbard@ and this is what is causing trouble.

Are you seeing this in Outlook express OR in Works Word processor?

Converting Words Works 8 into office word 2000

Posted: 16 Jan 2006 01:29 PM PST

Hi Chris,

See file options under File | Save As | Save as type

Use the Rich Text Format *.rtf option.

Also, Microsoft advice is given here:

http://www.microsoft.com/products/works/more/worktogether.mspx

HTH
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works & Word) 1999-2006
Works Help & KB Links: http://www.btinternet.com/~kevin.james1/WorksFAQ.htm





"Chris" <microsoft.com> wrote in message
news:com...
| Hi there, is there a way to convert a works word document into office word
| 2000 doc? i downloaded a converter but it wouldnt install on my computer.
|
| thanks in advance,
|
| chris


copying txt files into MS Works WP 7.0

Posted: 16 Jan 2006 06:19 AM PST

Re: The save location was C: as a Works 7.0 file.

Hi Anthony,

Normally the default save location is My Documents, wonder why yours is "C:"
???

Anyway, in the Save As dialog you can specify any save location by clicking
the down arrow for Save in:

After you saved the WordPerfect file as a Works 7.0 file, can you then
double click the new Works 7.0 file, does it open with Works Word Processor?

I do not understand what you mean, "when I open Works Word Processor i want
the new file to be listed with the existing files", perhaps you can provide
more info as to where the files are listed. I have Works 6.0, it should not
be much different then your 7.0.

Ken

"Anthony" <microsoft.com> wrote in message
news:com...

| Hi Ken
|
| Your first two paragraphs are correct.
|
| The save location was not "My Documents".
| The save location was C: as a Works 7.0 file.
|
| I want to save the document within Works Word Processor, so that I can
open
| it up in the same way as any other file already within Works Word
Processor.
| i.e. when I open Works Word Processor i want the new file to be listed
with
| the existing files.
| --
| Anthony Stirling
|
|
| "Ken" a écrit :
|
| > Hi Anthony,
| >
| > As I understand, you use All files (*.*), the WordPerfect file opens and
you
| > can read/modify as desired.
| >
| > However, when saved, it saves as a Works document but not in the
location
| > desired.
| >
| > The default save location for Works 7.0 is "My Documents". Assume this
is
| > where the file was saved when you saved it?
| >
| > To save the file in a different location you will have to select that
| > location on the Save As dialog popup.
| >
| > Ken
| >
| > "Anthony" <microsoft.com> wrote in message
| > news:com...
| >
| > | Thanks Ken
| > |
| > | OK up to the stage of selecting Wordperfect 6.x *doc;*.wpd).
| > |
| > | However, the Wordperfect files are only displayed when Files of type
| > | All files (*.*) is selected.
| > |
| > | And then, following your directions, the file gets saved as a Works
| > | document; but only on the hard drive and not in the Works Word
Processor
| > | files.
| > |
| > | Regards
| > |
| > |
| > |
| > |
| > | Anthony Stirling
| > |
| > |
| > | "Ken" a écrit :
| > |
| > | > Hi Anthony,
| > | >
| > | > Works Word Processor can open WordPerfect 6.x files.
| > | >
| > | > First I suggest you copy the files from floppy disc to hard drive.
To
| > many
| > | > errors can occur if one works directly from a floppy.
| > | >
| > | > One way to open a WordPerfect file......
| > | >
| > | > Open Works Word Processor.
| > | >
| > | > Choose File on it's menu bar, then choose Open on it's menu.
| > | >
| > | > In the Open dialog popup click the down arrow for Files of type:
choose
| > | > WordPerfect 6.x (*.doc;*.wpd), then locate and select the
WordPerfect
| > file,
| > | > click Open.
| > | >
| > | > If you want to save the opened file as a Works Word Processor file.
| > choose
| > | > File on the menu bar, then choose Save as:. choose Works
| > Document(*.wps)
| > | > for Files of type, click Save.
| > | >
| > | > The saved file will now open into Works Word Processor when double
| > clicked.
| > | >
| > | > Ken
| > | >
| > | > "Anthony" <microsoft.com> wrote in message
| > | > news:com...
| > | > | Hello!
| > | > |
| > | > | I have some Wordperfect 6.0 (Win98) text files on floppy disc.
| > | > |
| > | > | I have tried various means to copy them into my Microsoft Works
7.0
| > Word
| > | > | Processor files, so that I can open them from Microsoft Works Word
| > | > Processor.
| > | > |
| > | > | I end up with the files attached to, rather than within, the Word
| > | > Processor.
| > | > |
| > | > | My Operating System is XP (home edition). Any suffestions please?
| > | > |
| > | > |
| > | > | --
| > | > | Anthony Stirling
| > | >
| > | >
| > | >
| > | >
| >
| >
| >


Just a FYI for strange behaviour.

Posted: 14 Jan 2006 07:26 PM PST

Hi Kevin,
no, I haven't.
I have had my Canon i250 for some time.
I will however, check for new drivers
and also re-install MSWorks, if I can find my original CD. :)

Thanks

I still think I am the only one who after 8 years cannot
solve the other problem of a sticking cursor, when opening
a file for the first time for the day.
I always have to re-site the cursor with the mouse
a keyboard stroke will not shift it.
So probably a problem with my old banger and video card or something.








| Hi Rodney,
|
| Have you changed your printer during this time?
|
| Anyhow, you may want to check/change the printer driver.
|
| HTH,
| --
| Kevin James.
| Tua'r Goleuni
| Microsoft MVP (Works & Word) 1999-2006
| Works Help & KB Links: http://www.btinternet.com/~kevin.james1/WorksFAQ.htm
|
|
|
|
|
| "Rodney" <com.au> wrote in message
| news:phx.gbl...
| |
| | MSWorks 4.5a.
| |
| | Over the past few months , I have encountered a particularly annoying
| | feature crept into my platform.
| | On occaisions, I may use an MSWorks file, say "20050110 Days.wdb"
| | After use, I save and exit the file.
| |
| | Sometimes later, I wish to re-open the file, yet MSWorks advises,
| | "File already open" when, clearly, it is not.
| |
| | Anyone else strike this before?
| |
| |
| |
| | --
| | pookiethai at iprimus.com.au
| |
| |
| |
|
|


Work 8 - can't open pre 2000 files ?

Posted: 14 Jan 2006 10:32 AM PST

Thanks for your interest.

When I click on the file name in Explorer, Works opens but then displays the
message:-
'Works cannot open "C:\documents and settings\My Documents\oldfile.wps". The
file may be in use by another application, the file format may not be
supported by any of teh installed converters, or teh file may be corrupt.'

Same happnes if I navigate to the file in the Works Word Processer "Open
File" panel. This happens for every pre-2000 .wps file, but never for more
recent files. The pre-2000 files can, in every case, be openen by Works 4.5
(under WinME) on my other PC, and if I jsut open them htere ans then save
them with no specific moodification so they get a 2006 date, them Works 8 can
open them ...

These files would actually have been created by the computer previous to
either current machine, not sure waht version of works (works 3 perhaps ??)
under Win 98, but files created this way during early 2000 (prior to theWorks
4.5/WinME PC being purchased at teh end of 2000) do NOT give teh problem.

"com" wrote:
 

Microsoft Word - How do I get hyperlinks to work (enabled) in Word document? Not placing them but following them from someone else's document.

Microsoft Word - How do I get hyperlinks to work (enabled) in Word document? Not placing them but following them from someone else's document.


How do I get hyperlinks to work (enabled) in Word document? Not placing them but following them from someone else's document.

Posted: 23 Sep 2013 02:47 PM PDT

I am using Office 2013, Home & Business (Word and Outlook) and (2010 if i need to), Windows 7 Home Premium SP1.  The original document came by email (protected mode) - with multiple links within.  I have enabled editing in the document, saved a copy to bypass read only, saved it in different Word formats (word document, 97-2003, macro-enabled) but none allow me to open the linked documents.  

 

I was able to open one link a few weeks ago but it was so hard and I had tried so many things, I don't remember how I did it.   The link that did open to a document was a problem too - the checkboxes within the form would not work.  I deleted the entire thing to start over trying to figure it out.  I had made so many changes through trial and error I wasn't sure where I began.  Since I had the original email I knew I could start from scratch.  I haven't been able to do it again.  Now I am lost.  So, how to get hyperlinks to work?  And once I do that, I am still faced with the problem of the checkboxes not working in the linked document (that I can no longer access)?   Any ideas? 

Custom Printing isn't printing in Word 2013

Posted: 23 Sep 2013 02:09 PM PDT

I'm trying to print several pages of a large document in Word 2013, but it's not printing.  The printer is set up correctly, and the test page and Print Current page option print beautifully.  But when I do "Custom Print", it doesn't go to the printer at all.  

Excel to Word macro using tables...

Posted: 23 Sep 2013 01:28 PM PDT

I have a working macro in Excel to copy a table and paste it to a bookmark in word. The user wants to be able to keep the first row of the table (header) showing if the result of the paste makes the table span more than one page. For example, the table in excel is

Hdr Hdr Hdr Hdr

1    2       3      4

1    2       3      4

1    2       3      4

but after the 2nd row it goes to a new page. So the user would like to see the resultant Word table look like

 

Hdr Hdr Hdr Hdr

1    2       3      4

Hdr Hdr Hdr Hdr

1    2       3      4

1    2       3      4

 

Can this be accomplished from within the Excel macro?

 

(My guess is no).

 

Bob Umlas (Excel MVP)

 

Thanks.

Spell check in the headers

Posted: 23 Sep 2013 12:31 PM PDT

Hello,
I have a document with multiple header styles used and the spell checked does not seem to be checking the text into those headers. It just says "You are good to go" when clearly multiple misspelled words were detected in the header styles.

Please advise.

Thanks.

Widening/expanding drop-downs in the QAT

Posted: 23 Sep 2013 12:27 PM PDT

TL;DR I want to make the style drop-down box on the QAT wider than it is.

I've added the Style drop-down box to the QAT. The style names I use are somewhat long, particularly as they can have multiple prefixes (i.e. "ABC text bullet", "XYZ box head 2," etc.). These names are mandated by the client and the designer, so there is no changing them. Because of the long names, I am often unable to tell which style is applied by looking at the QAT. I know there are workarounds (e.g. allow stylnames in the margins of draft view, opening the style pane off the home menu, clicking the drop-down arrow on the QAT), but these are not as convenient as expanding the QAT drop-down to always display the name. Can someone please help?



Sorry that this is probably often-asked and easily answered, but I've been searching for quite a while and can't find the option. 

Word no longer inserts citations

Posted: 23 Sep 2013 12:27 PM PDT

I am working on my thesis.  It is currently about 60+ pages including introductory and title pages, tables of contents, figures, and graphs, content text, and references.  I have over 80 sources, and so far writing, formatting, citing, and cross-referencing has been going more or less acceptably well.  There have been very few problems, and nothing a few hours of frustrated tech-fighting couldn't overcome.  Until now.

A few days ago, when I began working, word stopped inserting new citations.  I go through the same process to insert a citation I've been using all along.  Word's internal Reference tracker keeps record of the new references I'm trying to cite, and recognizes them as references.  It even accepts new sources.  But when I insert the citation, instead of successfully inserting a citation, such as [13] where I can highlight the reference to receive a gray box around the number acknowledging that it is indeed a citation, it just inserts the text " [1] ".  All citations are now " [1] " regardless of their actual number, and none show up as actual references or citations, just text.  

This problem started overnight, with no changes to any formatting or settings within word.  I have no idea what happened.  Any insight or assistance would be greatly appreciated.  

I'm using Word 2010 and IEEE 2006 style.  

Cheers

Opening a File Brings an already open Word File to the front

Posted: 23 Sep 2013 12:18 PM PDT

This is kinda annoying but when I open a Word file (or Excel for that matter), it brings an already open Word file to the front before opening the file I double-clicked to open (usually from a folder in Windows Explorer) and places it in a different location.  I have a Word file that I always leave open but wish to leave that one minimized when I need to look at others throughout the day.  None of my open windows in any program are at full screen size but I just tested and it happens even at full size.  Is there a way to eliminate this file "connection?"

Word 2013 save as button doesn't work

Posted: 23 Sep 2013 11:48 AM PDT


On the toolbar, pressing "save as" button returns Visual basic error, wrong number of arguments

exclamation point custom paper word

Posted: 23 Sep 2013 10:18 AM PDT

With my new computer with Windows 7 and office 2013, there's a red ! For custom paper size for my printer. The size prints, but not correctly. This is what I've done so far:

·         set as default printer

·         reinstalled drivers from disk instead of Windows 7

·         run Microsoft fix it (no errors detected)

Microsoft Office 2013 dowload

Posted: 23 Sep 2013 10:04 AM PDT

I bought Microsoft Word 2013 for my new computer, but mistakenly uninstalled it. Now, having entered the key, I get the message "Sorry, your connection is slow, this could take some time". In fact, it does not download at all. Any solutions would be gratefully received.

Help Text in Form Fields - Not Disappearing

Posted: 23 Sep 2013 09:50 AM PDT

Why won't the help text disappear in form fields? Having to delete the help text before inserting text. (Yes the document is protected.) Have checked on three computers. Text disappears upon text insertion on one, but not on two others. Same document - different results. Help!

How to create a navigational bookmark in Word 2013

Posted: 23 Sep 2013 08:49 AM PDT

Hi. I've created an MLA style paper using MS Word 2013 and want to create a navigational table of contents. However, I do not know how to bookmark a single page in the contents that does not use a heading style.

 

So, I know how to create a table of contents using Styles. I use Heading 1, Heading 2, Heading 3 all of the time, and it's very useful. Those headings appear as a navigational table of contents when View > Navigational Pane is selected, and they are also used to automatically create a table of contents. I can do all of that.

 

What I don't know how to do is create an item in the navigational table of contents that does not link to a style heading. My MLA paper has a Title Page, the essay, and a Works Cited page. I have applied a Styles heading to the Title Page and to the Works Cited page by simply selecting the respective text and applying a heading style. The name of the selected text appears in the navigational table of contents, and that's fine.

 

My question is how do I add an item to the navigational table of contents without applying a style heading to specific text? If I select the first few words of the essay and apply a style heading, that's what will appear in the essay. I don't want that. I want a title such as "Essay" to appear.

 

Thanks

How to convert all existing footnotes to custom mark footnotes

Posted: 23 Sep 2013 08:43 AM PDT

Hi,

We are having a huge document containing more than 400 pages and almost 200 footnotes. The problem is that we have to remove all section break within that document so all our existing footnotes will have their numbering changed. Is there a way to convert all existing footnotes in order to keep it's current index number and set that value under the custom mark field so that we do not have to do it one by one
Kind Regards

Michel

How to print all footnotes list within office word 2010

Posted: 23 Sep 2013 08:37 AM PDT

Hi,
  We have a document containing 166 footnotes that restart after each section. We would like to print the list of each footnotes with the current number in order to validate all of them one by one from the printed copy.
If
1) open file
2) switch to Draft view
3) click on References/Show Notes

4) select all footnotes

5) If we click on File/Print under settings, Print Selection is grayed out

So how should I proceed in order to get a paper version containing all footnotes only with their existing numbering
Kind Regards

Michel

Multiple IF comparisons in Word mail merge

Posted: 23 Sep 2013 08:28 AM PDT

I am trying to write an IF statement in a Word mail merge. I need to compare multiple "true" statements on a single field, with one response if any of those statements is true and a different response if all are false. I have tried several nested IF statements and I get the correct deposit amount for the international trips, but nothing for the domestic ones...

Here's what I need. I'm creating confirmation letters for trip reservations. If the trip is international the deposit fee is higher. Unfortunately our horrible database doesn't have a field to designate something as "domestic" or "international", so I'm trying to say: 

 IF the location is Belize, OR Jamaica, OR Nicaragua, OR Yucatan, then the deposit is "this amount." IF the location is NONE of these, then the deposit is "that amount."

Can anyone help?? Thanks in advance!

Cannot start Word 2013

Posted: 23 Sep 2013 07:40 AM PDT

When I click the icon to start Word 2013. I get a popup that says "Something went wrong. We couldn't start your program. Please try starting it again. If it won't start, try repairing Office from 'Programs and Features' in the control panel." I repaired from control panel and still no help. Then tried to start in Safe mode and didn't work either. Any help would be great, Thanks. 

Header Footer question

Posted: 23 Sep 2013 06:43 AM PDT

Using Office 2007 in Windows 7. I know how to place file name in footer of document for future reference. Is there a way to make this a default for every document created so one doesn't have to go thru steps with each new (or previous) document?

word 2013 open file from sharepoint 2013

Posted: 23 Sep 2013 04:23 AM PDT

Good day,

I have met the following situation with Word 2013:

1) I created SP asset library and uploaded 10-20 images;

2) lauched word 2013 and selected open file dialog;

3) inserted library's link into address field and web view from SP started to render;

if I click on file before vertical scroll will render - web view will collapsed and changed to standard file open view.

In Word 2010 everything is OK.

Does anyone know how to fix it?

todos os botões do Word 2013, estão em inglês. Como posso traduzir para o português?

Posted: 23 Sep 2013 03:19 AM PDT

Meu  computador foi recentemente formatado e instalado o word 2013, mas está me causando alguns transtornos, pois todos os botões estão em INGLÊS e não consigo usá-lo corretamente, até tentei mas alguns ícones se tornam impossíveis de usar. Gostaria de saber como resolver esse problema o mais rápido possível.
Aguardo resposta com certa urgência, pois tenho trabalhos a serem feitos e não estou conseguindo.


Styles and multi-level numbering

Posted: 23 Sep 2013 03:18 AM PDT

I use word 2010.   Currently I have styles linked to various multi level of numbering which works great.  

 

1  Heading 3

 

1.1  body text

 

1.1.1  body text

 

But we have users who need a heading at level 1.1 (but not always) so I now need all on the same template (as well as keeping the above) these options for people to use:

 

1  Heading 3

 

1.1  Heading 4

 

1.1.1  body text

 

Also I may need:-

 

1    body text

 

1.1   Heading 5

 

1.1.1  body text

 

Is there any way to accomplish this - without the need to create 2 or 3 totally separate styles for this??

Office 2010

Posted: 23 Sep 2013 02:52 AM PDT

The programme was installed on my lap-top when I purchased it several years ago but suddenly all my documents in word and excel are locked with the Microsoft logo.  What does this mean? When I tried to re-activate the programme I was asked for the product key which I do not have so does this mean that I have to buy an Office package now?  If so and buy a later version (such as 2013), will I be able to access all my old documents?

Can not save customized keyshortcut into template

Posted: 23 Sep 2013 12:23 AM PDT

Hi there, I have a brand new HP computer and pre-install office 365.
I had uninstalled the old office 365 at control panel, restart and install office 2013.

everything seems fine but I can not save the keybroad shortcut which created from insert, symbol, more symbol, shortcut-key, Assign and press close. It pointed to save changes to "Normal"

I can use that shortcut at that doc, but after I closed MS word I can not use that shortcut again. I have to create it once more.
I can use the other computer to create dotm file and replace the Normal.dotm in HP computer. This works for me.
But I want to fix it permanently..

I had this experience before at another computer and I contact MS telephone support and let him remote my computer, but what he did is delete the registry related to office and reboot  my computer without asking. All other setting were reset...I ask him why and he said no other choices...and no reason.

I just want to know is any other choices which can solve the problem and why newly installed office had this problem.

Thanks for any useful information.

Regards,
Rafe

English assistance service missing from office 2013

Posted: 22 Sep 2013 10:40 PM PDT

The English Assistance service, which is supposed to appear in the research pane as one of the reference books, is missing from Office 2013. I followed all the instructions contained in the support page but there is no way I can activate the service. Any ideas for a workaround? Is this a known problem of the newest version of Office? 

MY HOTMAIL.COM.AU HAS SUDDENLY REFUSED TO WORK

Posted: 22 Sep 2013 09:17 PM PDT

MY HOTMAIL.COM.AU HAS SUDDENLY REFUSED TO WORK, WHY????
IT'S BEEN WORKING FINE UNTIL NOW.

Indexing oddities (bugs?)

Posted: 22 Sep 2013 09:03 PM PDT

I have several indexes which are correct except for a few things:

1. In most of them, some entries are out of alpha order. The Reference Mark Entries are ok. Does anyone know of a bug that might do this? Correcting these is extremely slow and tedious.

2. Sometimes I get two index lines for two identical marks on the same page of the text. It should not do this. Is it a bug? (I keep a few duplicates in case the pagination changes and puts them on different pages.)

3. I do not understand why some random lines in the indexes come out bold or small-caps, when the entries in the text are neither.

4. Sometimes I delete one of the indexes and write the file out to try creating the index again. If I do Open and Repair on the file whose index I deleted, the index is still there or there again. Why is this?

I want to thank all who answered my previous questions.

Steve Gray

Saving customized Word 2013 QAT

Posted: 22 Sep 2013 08:19 PM PDT

It's a good thing I don't actually need to use Word 2013 because it seems incapable of saving my QAT the way I want it. Here's a portion of what I have in Word 2010:

 

 

After repeated customization, the QAT in Word 2013, which should have the same buttons in the same order, showed this yesterday:

 

 

I rearranged the buttons again (to match the Word 2010 order), then quit Word and reopened it to ascertain that they were still in the same order, but tonight when I look again, here's what I have:

 

 

What is causing this recalcitrance?

 

(As an aside, this comparison shows how much less space-efficient the Word 2013 QAT is. I won't even comment on how ugly the button icons are.)

Auto summarize in Word 2010

Posted: 22 Sep 2013 07:17 PM PDT

Why did you remove the auto summarize feature in Word 2010?

Inserting Arrows on Photos In Word 2007

Posted: 22 Sep 2013 06:52 PM PDT

Hello - I'm trying to insert an arrow or circle on top of a photo to point to a particular point on the photo.  I can place the arrow on the photo, however, when I "save" the file, the arrow goes to the bottom of the page. The arrow or circle does not stay in place on the photo. Any help would be appreciated.

Thank you

watermark picture- word 2013 for envelope

Posted: 22 Sep 2013 05:46 PM PDT

I would like to create a watermark picture doc with word 2013.  I can do this nicely on regular sized paper.  I want to print it on A5 size paper. I have  enlarged the original picture 1800%. It fits nicely on the 8X11 paper in the middle.  I don't know to make it print an A5 envelope without the program reducing the size of the picture.  My final goal is to print the watermark picture on the front of the envelope filling most of the page. If Word can't do this, can I manipulate the graphic so it will print the full front of the envelope?  If yes, how?
Thanks in advance for your help.

APPCRASH

Posted: 22 Sep 2013 03:54 PM PDT

I have recently reinstalled Office 2010 after having a new hard drive and motherboard installed. However, whenever I try to start Word I get a message saying that Microsoft Word has stopped working, and the equivalent with Powerpoint, with the following problem signatures
Word:
Problem signature:
  Problem Event Name: APPCRASH
  Application Name: WINWORD.EXE
  Application Version: 14.0.6024.1000
  Application Timestamp: 4d83e310
  Fault Module Name: KERNELBASE.dll
  Fault Module Version: 6.1.7601.18229
  Fault Module Timestamp: 51fb1116
  Exception Code: c06d007f
  Exception Offset: 0000c41f
  OS Version: 6.1.7601.2.1.0.256.48
  Locale ID: 2057
Additional information about the problem:
  LCID: 1033
  skulcid:

1033

 

Powerpoint:

 Problem Event Name: APPCRASH
  Application Name: POWERPNT.EXE
  Application Version: 14.0.6009.1000
  Application Timestamp: 4cc1a4ed
  Fault Module Name: ppcore.dll
  Fault Module Version: 14.0.6026.1000
  Fault Module Timestamp: 4d9cd67b
  Exception Code: c0000005
  Exception Offset: 0003b782
  OS Version: 6.1.7601.2.1.0.256.48
  Locale ID: 2057
Additional information about the problem:
  LCID: 1033
  skulcid:

1033

What can I do? I have tried to run Office Diagnostics but can't seem to find it.

 

 

probleme d'instalation de office

Posted: 22 Sep 2013 03:42 PM PDT

j'ai acheter un ordinateure en australie avec windos pre instaler ....
j'essaye de l'activer mais je n'y arrive pas et je n'est pas de cle code pour le faire .....quand j'essaye de le telecharger viala platforme windos n'arrive pas a s'insatler car :mon compte microsoft est base en france 
du coup je ne sais pas quoi fair???

Microsoft Office 2010 update

Posted: 22 Sep 2013 12:59 PM PDT

Why when I try to open a word document which now is orange over night, do I get a message asking me if I want to buy microsoft 10? Then I can only open my old documents if I go through the original word? And can't open documents on web pages?  Annoyed! Am trying to apply for jobs and send off CVs!! Please help!!!

My CanonMP600 will not print Office documents

Posted: 22 Sep 2013 11:08 AM PDT

My Acer computer which runs on Windows 7 Home Premium and CanonMP600 have been working happily together since they were installed 3 years ago.

Recently though, I haven't been able to print Adobe Reader 9  documents that I have downloaded from the internet.

Today I followed the Adobe online trouble shooting guide and had success in printing an Adobe document that was in my Dropbox.

Since then I am not able to print anything from Word or Excel although I can print off the internet such as emails.

I am not very computer savvy but can follow instructions so I would be really grateful if anyone has had a similar problem..... I'm hoping the solution is simple.