Pages

Search

Single mailbox - Multiple users accessing - Microsoft Exchange

Single mailbox - Multiple users accessing - Microsoft Exchange

Single mailbox - Multiple users accessing

Posted: 10 Jul 2004 03:12 PM PDT

Use a Public Folder:
http://www.msexchange.org/articles/MF021.html

--
Mark Fugatt
Exchange MVP
http://www.exchangetrainer.com
http://www.msexchange.org
"vipont" <net> wrote in message
news:UQZHc.313$uswest.net... 

Delivery restrictions in Exchange 5.5

Posted: 09 Jul 2004 08:00 AM PDT

Thanks, I'll give it a try. Just for my own curiosity,
what am I doing wrong with the "reject messages list" method? 
tab of the IMS 
in message 

Message tracking weirdness

Posted: 08 Jul 2004 06:06 AM PDT

 
sounds like the 
email server? They can 
negatively 
bit overboard)

Right. It seemed rather silly that it might confuse
message tracking but I just wanted to double check.
 
ensure that you 
that we keep the 
7 days. Another 
tracking the message 
access to or that does 

Hmm.. I don't believe it was either of these cases. As we
just setup the Exchange server and enabled message
tracking at that time, we have logs back to the beginning
still. As this is the sole mail server now it shouldn't
have to contact any other internal mail servers either.

Anyway, I'll just ignore it for now and see if it
reappears. If so, I'll worry about it more then. I mostly
wanted to verify that there wasn't something really dumb
going on (relying on the 220 output of the server.)

Thank you for the response and suggestions,

free/busy in exchange 2003

Posted: 07 Jul 2004 12:56 AM PDT

You can not set FreeBusy as privateor public. What Mark is referring to is
setting Calendar to be either viewable or not which you set it by assigning
permission for Default to NONE.

As far as FreeBusy goes, you will not be able to see other people's if that
person has never used calendaring. What I usually do when I create a new
mailbox is to send a test appointment to that box and ask the owner to
accept. Once it has been accepted the freebusy will become visible.



"Mark Arnold [MVP]" <org> wrote in message
news:com... 

The e-mail account does not exist at the organization this message was sent to.

Posted: 06 Jul 2004 08:28 PM PDT

Hi,

Thanks for your inputs, however, I had found that the recipient policy had
the "responsible" option selected - which I disabled to get the system
functional.

Thanks a lot for the help and support.

Regards,

Manoj Shriyan
"Matthew Tisdel" <microsoft.com> wrote in message
news:com... 
receive email for the same domain. You might try looking at the Routing
groups and set up a SMTP connector between the servers. However, I am afraid
that it will send all emails to the other server. 
address, I 
way 
message 
acumen.co.in 
Contact in 
non-acumen.co 
am 
defined 
adivate, 
schourasia 
users, 
this 
recipient 

messages building up in queue

Posted: 06 Jul 2004 02:58 PM PDT

Hi Romero,
in the first place you should not even accept emails which are not addressed
to your local domains/user. Exchange 2003 can be configured out of the box
to not accept this junk. If you are not using echange 2003 or if you want to
reject all the junk to save bandwith you should install a proper antispam
solution.
there alere are lots of free and commercial on the market. I personally
prefer rejecting filter such as my www.aloaha.com.
Futhermore Aloaha can remove read receipt requests and delivery receipt
requets from inbound mails.
Frank

"eric romero" <com> schrieb im Newsbeitrag
news:phx.gbl... 
for 

Outlook Versions?

Posted: 06 Jul 2004 09:25 AM PDT

Hi Neil,

The supported versions of Outlook are Outlook 2000, Outlook 2002, and
Outlook 2003. These are the versions that have been tested with Exchange
Server 2003. Earlier versions of Outlook might work just fine with Exchange
2003, but they have not been rigorously tested, so YMMV.

Hope this helps.
--
Scott Schnoll
Microsoft

This posting is provided "AS IS" with no warranties, and confers no rights.


"Neil Shirley" <complete-it.co.uk> wrote in message
news:phx.gbl... 
support 
this 

Microsoft Word - delete underscore

Microsoft Word - delete underscore

delete underscore

Posted: 03 Feb 2013 09:42 AM PST

I used underscore to create margin-to-margin lines in my text, but now I want to delete the lines and I can't. When I highlight the lines, the text above and below them delete, but the lines remain.

function formula how to subtract

Posted: 03 Feb 2013 05:52 AM PST

I have a very small table and would like to subtract values in 1 column from the other.  When I choose the formula command, the dialog box opens and it the formula is saying = sum(=left).  It is adding up 3 columns together which I don't want.  I want to subract 1 column from the other.  Can anyone tell me what the forumula will be?

A complete list of commands in Word 2010's Equation Editor?

Posted: 03 Feb 2013 01:19 AM PST

For example, if I want to add a single underbar accent to a letter, I type \underbar.

But if I would like to add a double underbar accent to a letter, how to I find the correct command?

Macro to save as with prompt

Posted: 02 Feb 2013 08:35 PM PST

Hi,

I will have hundreds of word documents to save as txt (UTF8) and instead of going through the menus, I'm trying to make a macro, and I'm not familiar with VBA. I recorded one that works but it always saves the document with the same name which means it overwrites the previous document I used the macro with, and doesn't let me choose the name anyway. So I want a prompt box to appear to be able to write in the name.
The name of the files would be RESxxxx.txt so that's why I tried to have the RES already there, and just limit the input with the xxxx part.

My current try says error 13 file mismatch. I obviously do something wrong. Any help is appreciated.

Sub SaveTxt()
'
' SaveTxt Macro
'
'
    ActiveDocument.SaveAs2 FileName:="RES" & myFilename = InputBox("enter name") & ".txt", FileFormat:=wdFormatText, _
        LockComments:=False, Password:="", AddToRecentFiles:=True, WritePassword _
        :="", ReadOnlyRecommended:=False, EmbedTrueTypeFonts:=False, _
        SaveNativePictureFormat:=False, SaveFormsData:=False, SaveAsAOCELetter:= _
        False, Encoding:=65001, InsertLineBreaks:=False, AllowSubstitutions:= _
        False, LineEnding:=wdCRLF, CompatibilityMode:=0
End Sub

How do I lighten the dark blue background of Word?

Posted: 02 Feb 2013 06:22 PM PST

I can't see the words clearly in the File tab, leftmost section of the window, because the blue is too dark. I'm talking about Word in Office 2013.

How to stop having to Constantly signing into every office 365 app on my PC

Posted: 02 Feb 2013 02:52 PM PST

Very annoying that on my home PC I have to constantly re sign in to every single application over and over again, driving me nuts! 
I do not see any OBVIOUS way to tell it to remember

any suggestions

overstrike

Posted: 02 Feb 2013 02:15 PM PST

When I click the Insert button to overstrike in a report, nothing happens.  It inserts but does not overstrike.  How can I make this work

Font display issues in Office 2013

Posted: 02 Feb 2013 09:35 AM PST

Win7/Upgraded Office 2010 to 2013.

 

A few fonts do not render correctly in Office 2013. I use Trade Gothic on my computer and it worked fine with Office 2010. As soon as I upgraded to Office 2013 it stopped rendering. I also know mail sent from others also appear scrambled.

 

Any ideas on how to fix it?

 

When I did the upgrade, Office 2010 was retained. It continues to work correctly.

 

 

I can't read word 2010 files that I download -

Posted: 02 Feb 2013 06:38 AM PST

Downloaded filed is unredable.

Windows word problems

Posted: 02 Feb 2013 02:01 AM PST

My free trail isn't doing to good right now, I am very frustrated and need to do my homework. It is due today!!!!! I also am not paying for something that keeps giving me problems. I can not get into my word program. And downloading was a problem as well. I tried to go to win and ask a question but they want to charge, I am not paying for problems on a program that isn't properly working to begin with.

Open Office - [discuss] Modifying the REPLACE function

Open Office - [discuss] Modifying the REPLACE function

[discuss] Modifying the REPLACE function

Posted: 03 Sep 2006 07:49 PM PDT


Le Lun 4 septembre 2006 09:25, Cyrille Moureaux a écrit : 
 

I don't think it can work on style objects such as page breaks though.
Only on the core text.

Regards,

--
Nicolas Mailhot

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Is there a list of known file format incompatibilities?

Posted: 31 Aug 2006 04:15 PM PDT

Jim Ottaway wrote: 
You can check here. There are a couple 'dozen articles concerning
compatibility.

saludos,
Richard. 

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Spreadsheet

Posted: 30 Aug 2006 09:15 PM PDT

Himanshu Gupta wrote: 

Are there different cell formats in many of the cells? That can slow
down saving quite much. If you don't need the formats, try removing
them. Saving a file that contains just plain text is usually much faster
(but we are aware that saving with different formats has to be improved,
too).

Niklas

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] I hate Openoffice

Posted: 30 Aug 2006 01:36 AM PDT

MICHAEL GIOMETTI wrote:
 

You buy WORD and EXCEL. EXCEL has one L, by the way.
Then you use them.

--
Daniel Kasak
IT Developer
NUS Consulting Group
Level 5, 77 Pacific Highway
North Sydney, NSW, Australia 2060
T: (+61) 2 9922-7676 / F: (+61) 2 9922 7989
email: com.au
website: http://www.nusconsulting.com.au

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] An idea for menu entry File/Recent Documents

Posted: 29 Aug 2006 02:17 PM PDT

Mathias Bauer wrote: 

Hmm.. looking at
http://framework.openoffice.org/servlets/ProjectMailingListList ,
both state 'discussion list'. I guess we have to discuss first on which
topics will be discussed and which not ;-)
 

I cannot say that the ones who left, did wrong :-\ (
I think I myself once wrote that only very little results come from the
discussions here - which might have been too pessimistic, but anyway.

The situation as it is, lays more responsability on the shoulders of
those (from the devs) that remained. It is good if they can pick up the
fruitfull discussions, or ideas that are ready to use, to guide them to
another level :-)

Kindest regards,
Cor

--

Cor Nouws

Done a test ride and want to investigate the car?
http://marketing.openoffice.org/ooocon2006/schedule.html

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Idea: Email program

Posted: 29 Aug 2006 01:00 PM PDT

Lars ( I think ) wrote:
 

Thanks for the list or programs.

What I was trying to figure out, was what ten applications Thomas meant
when he wrote: "which are needed in the office to write calculate and
communicate and surf"

BTW, Ardour is an audio editor, not a music editor.

xan

jonathon

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Linux versions

Posted: 28 Aug 2006 08:27 AM PDT


OK this has worked great - thanks, Alexandro and Peter. I didn't even
know it was possible to convert rpm to deb! Incidentally my language
pack debs end with 2.0.3-7 while the official release ones converted
from rpm end 2.0.3-8 but this doesn't seem to have affected the
functionality. Maybe there are no major differences between them?

Thanks again,
Steve.

--- Peter Hillier-Brook <plus.com> wrote:
 




__________________________________________________ _________
Now you can scan emails quickly with a reading pane. Get the new Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Massachusetts goes to MS Office, but uses

Posted: 28 Aug 2006 02:55 AM PDT

On Fri, 2006-09-01 at 16:06 -0500, Shawn K. Quinn wrote: 

If its used as the internal format they would have to drop MSOOXML and
replace it with ODF. Politically a very difficult thing to do given
there current reasons for developing their own XML based "standard"
 

So the code will just get forked and there will be Free and Non-free
variants. I think they would be likely to lose that battle since the who
would use a non-free broken version when they can have a free version
that does what is required?
 

Look at it this way. Treat MSOOXML as an incompatible ODF. Both ODF and
MSOOXML are based on XML and similar approaches to the same issue. I
can't see any advantage in moving from MSOOXML to ODF and then breaking
it. If having a format that breaks the standard works, just stick with
MSOOXML.
 

But the browser wars were a lot different to this battle. MS are not
giving MSO away free with their operating system. If they decide to do
that, perhaps your concerns are justified but if they do that they lose
nearly half their operating income so I just don't see that happening
any time soon. I'd say a port of MSO to Linux was a lot more likely.

Imagine MS had been charging $50 for IE against Netscape being free. Do
you think they would have had the take up to start dictating web
standards? I don't.
 

Agreed.

Ian
--
www.theINGOTS.org
www.schoolforge.org.uk
www.opendocumentfellowship.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Word Underline Feature

Posted: 27 Aug 2006 01:35 AM PDT

On Sun, 27 Aug 2006 10:38:33 +0200
de wrote:
 

I think Louis was after a feature that underlines only words, not
whitespace as well. Of course i could be wrong.
 

--
Michael
Those that can, do; those that can't, teach.

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Announcement: OpenOffice.org Premium 2.0.3 has released

Posted: 25 Aug 2006 04:12 AM PDT

The OpenOffice.org Premium team proudly announces the final binary
installers of OpenOffice.org Premium 2.0.3 in the Files section. Please
download it, install it and enjoy the enhanced user experience.
---
OpenOffice.org Premium is a free and open source enhancement of official
OpenOffice.org plus some Extras for you to use. The Hungarian Native
Language Team has modified the source of OpenOffice.org and bundled lot
of extras with it.

OpenOffice.org the product is a multi-platform office productivity
suite. It includes the key desktop applications, such as a word
processor, spreadsheet, presentation manager, and drawing program, with
a user interface and feature set similar to other office suites.
Sophisticated and flexible, OpenOffice.org also works transparently with
a variety of file formats, including those of Microsoft Office.
---
The OpenOffice.org Premium installer is based on latest and greatest
Openoffice.org version 2.0.3.

You can download OpenOffice.org Premium 2.0.3 from here:
http://sourceforge.net/projects/ooop/

Current language versions:
Hungarian (HU), English (EN-US), German (de)


Current platforms:
Linux and Windows


The source modification is available from here:
http://sourceforge.net/project/showfiles.php?group_id=170021&package_id=194085

The source of modification is available for everybody. The modification
is utilize all Openoffice.org feature including localization. If you
want to help us to make OpenOffice.org Premium better you can help a lot:

* Translators - translate the resource files to your language and send
it them back to me
* Content creators/revisors - Send me templates and openoffice.org
documentation (in OpenDocument Format) for your language. Collect as
many as you can, but please keep out the poor, low quality content...
Someone might recheck the English content of upcoming OpenOffice.org
Premium 2.0.3 - It is only a sample.
* Gallery submitters/coordinators/organisers - Send me a free galleries
or images (mainly in vector based format) good quality SVG->WMF
convertions may be interesting...
* Builders - to build OpenOffice.org Premium with other language - I can
do it, but I have only one machine and it is also for work
* Programmers - to develop a new ideas, make it better
* Voters - If you find it useful you can vote for integration:

62405 FEATUR P3 All issues@distribution UNCO OpenOffice.org Premium
integration - Gallery (1/4)
62406 FEATUR P3 All issues@distribution UNCO OpenOffice.org Premium
integration - Fonts (2/4)
62407 FEATUR P3 All issues@distribution UNCO OpenOffice.org Premium
integration - Templates (3/4)
62408 FEATUR P3 All issues@distribution UNCO OpenOffice.org Premium
integration - Samples (4/4)
http://qa.openoffice.org/issues/show_bug.cgi?id=62405
http://qa.openoffice.org/issues/show_bug.cgi?id=62406
http://qa.openoffice.org/issues/show_bug.cgi?id=62407
http://qa.openoffice.org/issues/show_bug.cgi?id=62408


Best regards,
KAMI

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Bullets and numbering

Posted: 24 Aug 2006 03:26 AM PDT

Mart wrote: 

Just as tab indents to next level, shift+tab will do the reverse and
take you up a level

Cheers
Yo

--
"GET LEGAL - GET OPENOFFICE.ORG"
http://why.openoffice.org
ISO 26300 compliant

Graham Lauder,
OpenOffice.org MarCon (Marketing Contact) NZ
http://marketing.openoffice.org/contacts.html

INGOTs Assessor Trainer
(International Grades in Office Technologies)
www.theingots.org.nz

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Keyboard shortcut

Posted: 23 Aug 2006 03:14 AM PDT

Got it!

Thank you very much Adrian and Lars.


Lauri Sydänmaanlakka


----- Original Message -----
From: "Adrian Try" <com>
To: <org>
Sent: Wednesday, August 23, 2006 2:15 PM
Subject: Re: [discuss] Keyboard shortcut

 

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] OPENOFFICE.ORG CONFIG OPTIONS

Posted: 17 Aug 2006 12:33 PM PDT

Hi Robin,

Robin Hood - NCSD wrote:

[...] 
[...] 

The answer on the first question is simply 'no'.
It can be achieved by a macro, of course. However, I tend to group files
more on a project-base, than on a file-type base.

I'm not aware of an issue (request for enhancement), but didn't search
either.


Greetings,
Cor

(I've send a cc to you, because you are not subcribed to the mailing
list; Please mail to the list only.
To subscribe, mail to: org )

--
Cor Nouws

Done a test ride and want to keep the car?
See http://why.openoffice.org/

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Propuesta

Posted: 04 Aug 2006 12:32 AM PDT

On Thu, 03 Aug 2006 15:09:43 -0500, Angel Rolando
<com> wrote:
 
Hi Angel, I don't understand your question regarding a language-centric
template. Could you please re-formulate your question at the spanish list,
maybe we can help you better.

Que tal Angel, No entendi tu pregunta sobre una plantilla en idioma
especifico. Puedes re-formular tu pregunta en la lista de habla hispana,
quizas ahi te podamos ayudar mejor.

openoffice.org (debes subscribirte antes)



--
Alexandro Colorado
Grupo de Usuarios Linux Tabasco
http://www.gultab.org

OpenOffice.org
Community Contact // Mexico
http://www.openoffice.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

Microsoft CRM - Times and Dates

Microsoft CRM - Times and Dates

Times and Dates

Posted: 19 Feb 2004 04:15 PM PST

I'm needing the time displayed on a form so it can be edited.

"Gary" <com> wrote in message
news:phx.gbl... 
Date/Time, 
And 
meeting 

Developer Components for MS CRM

Posted: 19 Feb 2004 01:34 PM PST

But Gary, he obviously works for the company that's why
he's posted 2 different posts about this. In the other
he claimed it was very easy to use. In this one he asks
if anyone's tried it.
 
that......besides, most of 
introduced "Components" for MS CRM. 
components for 
ons. ASP.NET 
and VB.NET 
synchronization. 

Workflow Email Template

Posted: 19 Feb 2004 11:30 AM PST

It also has to be a manual step or it will execut automatically...

Pierre Hulsebus | EHTC.com


"Matt Parks" <com> wrote in message
news:com... 

CRM Not finding local server in the deployment app

Posted: 19 Feb 2004 08:35 AM PST

The steps are outlined in the implementation guide. This is
definately a product where you need to follow the steps very
carefully.

Basically, you go into the web interface, go into settings, business
units, users, select you admin user and then assign a license via the
License tab.

Matt

On Thu, 19 Feb 2004 09:17:54 -0800,
<microsoft.com> wrote:

I guess i missed the web license. where is it located and
what steps need to be performed. Appreciate the responce.. 
the web 
manager. 
Please 

Emailing all contacts in selected accounts

Posted: 19 Feb 2004 08:16 AM PST

ooooh....I see, well.....I guess Advanced find isn't that
advanced........well, if you knew which accounts, you could filter contacts
that were associated with said account, but thats not what you want, but it
is closer....

I think you might just have to write an app via the SDK, which shouldn't be
that difficult,...what you want isn't very complex

-Gary

"Derek Peeling" <microsoft.com> wrote in message
news:com... 
The thing is, I want to find the people using information only found in the
account record. 
'X' 
those Accounts. 
E-Mail, it sends the message only to the email address in the account but
not to the contacts associated with that account. If I'm not mistaken... 

Importing into CRM

Posted: 19 Feb 2004 07:51 AM PST

or use the DMF for free and important all said formats and then some!

-Gary

"Pierre Hulsebus" <com> wrote in message
news:phx.gbl... 

on_change() event for text fields

Posted: 19 Feb 2004 07:47 AM PST

Hi Steve, you can absolutley do this, but it's not officially supported. It
works at the schema/form level, but there is no UI tool that helps you do
it.

1) Export your schema from deployment manager
2) Manually add events to the desired for fields (using existing field
events as examples). Be carefull not to break your schema!
3) Re-import your schema.

I'd do it on a test system first.

Mike


"Steve" <com> wrote in message
news:840c01c3f6ff$9e27fce0$gbl... 

Recover licences

Posted: 19 Feb 2004 07:33 AM PST

You have to do this through the SQL Server Query Analyzer. If you are
not comfortable doing this DON'T DO IT. Also, back up your database
before running any scripts. Here's the directions for removing the
license:
1) Load Query Analyzer
2) Copy the table SystemUserLicenses to SystemUserLicensesB
-> Select * into SystemUserLicensesB from SystemUserLicenses
3) List the contents of SystemUserBase, ordered by Full Name
-> Select * from SystemUserBase order by FullName
4) Locate the user you want to delete
5) Copy the SystemUserID of the user to memory
6) Delete the License entry in SystemUserLicenses
-> Delete SystemUserLicenses where SystemUserID = '{insert
SystemUserID here}'
NOTE: the ' and {} are required as part of the string.

Again, if anything is not clear or you do not feel comfortable doing
this, STOP.

What is the technical reason for native mode requirement of the domain?

Posted: 19 Feb 2004 12:58 AM PST

Hi,

Sorry but OU's are available in AD in every mode i.e you
don't need to be in native mode to use OU's.

HTH.

Nicolas
 
that 
these 
building 
with 
MS 
the 

MS CRM Email Error

Posted: 18 Feb 2004 07:16 PM PST

Matt,

I cannot navigate to teh URL from any browser. As for
SSL, I'm not sure. Do you know a quick way for me to
check?

Thanks for your help.

Troy 
the CRM Server? 
a 
message 
- 
to 
i 
dispatch 
a 

Reusing the MSCRM grid controll .....

Posted: 18 Feb 2004 10:24 AM PST

Customer Effective (www.customereffective.com)has developed
"Components" for CRM
A collection of more than 12 development components for extending
Microsoft CRM for custom application add-ons. ASP.NET components are
provided for user interface development and VB.NET components are
provided for data access and synchronization.

http://www.customereffective.com/products_dc.html

very easy to use and rather inexpensive


"Gary" <com> wrote in message news:<phx.gbl>... 
Subscribe to: Posts (Atom)