Pages

Search

Cheap Statistic's tool. - Microsoft Exchange

Cheap Statistic's tool. - Microsoft Exchange

Cheap Statistic's tool.

Posted: 27 Apr 2004 03:25 PM PDT

Don't know about pricing, but http://www.quest.com/messagestats/ ?
www.promodag.com ?

Jim Boettger wrote: 

How to replace domain name for the emails going out?

Posted: 27 Apr 2004 07:03 AM PDT

Thanks for your help,


We acctually receive emails from our provider's POP3 server through POP3 connector. So I'm not sure if that domain name sharing would apply to that, But I will look into that.

Thanks,
Les
"Matthew Byrd [MSFT]" <microsoft.com> wrote in message news:%phx.gbl...
Hi Les,

It sounds like you are looking to send and receive email as com while there is another server out there that is completely separate that will also need to send and receive email as com ?

If this is the case then you will need to setup SMTP domain name sharing.

258203 XFOR: How to Configure Exchange to Share SMTP Domain Name Space
http://support.microsoft.com/?id=258203

What I might recommend is that you configure you system this way instead.

You send and receive as company.com this will allow you to have your own MX record on the internet and you will be able to process your own incoming and out going mail with any of the issues of setting up SMTP sharing.

Hope this helps,

--
Matthew Byrd
Microsoft PSS

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

This posting is provided "AS IS" with no warranties, and confers no rights.

"les" <com> wrote in message news:7Ktjc.23175$bellglobal.com...
Hello,

We use our MS Exchange Server 2000 for just sending emails and we need to have domain names the same as of the server where we receive emails (at our provider). What are the ways to make domain name the same?
In other words the question is:

How to make domain of Server B look the same as Server A that is completely separate and run by other company ?

Any help is greatly appreciated,
Les

Exchange 2003 time question

Posted: 27 Apr 2004 06:59 AM PDT

 
the same if the time 
seeing. 
confers no rights. 
wrote in message 
one 
the Eastern time zone. 

e-mail system limits the number of recipients that can be addressed in a sin

Posted: 27 Apr 2004 06:14 AM PDT


after the registry hack in the accompanying post, I am
still getting:

Your message did not reach some or all of the intended
recipients.

Subject: Test (again) delete pls..
Sent: 4/27/2004 11:15 AM

The following recipient(s) could not be reached:

Tuttle, Daniel on 4/27/2004 11:15 AM
The e-mail system limits the number of
recipients that can be addressed in a single message.
Send the message multiple times to fewer recipients.
<MGMAIL.mgm.ufl.edu #4.5.3 smtp;452 4.5.3 Too
many recipients>






 
Each Message 
confers no rights. 
message 
contacts, 
of 
have 
in 

How to disable the Msg for Expiry Day on Exchange OWA ,

Posted: 26 Apr 2004 09:20 PM PDT

Yes

"William Lefkovics [MVP]" <techsanctuary.org> wrote in
message news:com... 

ExMerge for 5.5

Posted: 26 Apr 2004 03:43 PM PDT

THANKS SO MUCH! 
believe 
posted as 

Messages in my BadMail folder

Posted: 26 Apr 2004 01:18 PM PDT

Mark:

Thanks for your reply. I kinda of thought that was well but the number of
message is so high. Yesterday I deleted the contents of the folder. This
morning there are over 17,000 files in the folder. I only have 525
mailboxes.

Any ideas?

Harrison Midkiff
"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Outlook discussion groups ??

Posted: 25 Apr 2004 04:26 PM PDT

You think that's what they meant?
How would you go about using a public folder for "discussion groups"? Would you make it an email folder? If so, how would the relevant emails get into that folder? Could the public folder also contain documents
Do you think they might be referring to "sharepoint services"?
Any additional info from anyone would be appreciated.

Microsoft Word - Why have I reverted to Word 2007 but kept the preview with Excel files?

Microsoft Word - Why have I reverted to Word 2007 but kept the preview with Excel files?

Why have I reverted to Word 2007 but kept the preview with Excel files?

Posted: 09 Nov 2012 01:22 PM PST

My Word documents have reverted to Office 2007 - though Excel files remain as 2013 Preview.???

How do I add text to a shape?

Posted: 09 Nov 2012 08:17 AM PST

In Word 2007, I could just type into a shape.  Now I have Word 2010 and I cannot do that.  How do I add text to a shape?  I tried adding a text box and typing text in that, and then moving it to the shape, but there must be another way.  Can someone help me?

If then else Home/Work address Fields Mail Merge

Posted: 09 Nov 2012 07:43 AM PST

How do I use a work address field on a mail merge or a home address if the work address is blank?  Thanks for any help.

Is there a special way in Word to use the Alt + 'x' technique to apply a combining mark to a character that is also a hexadecimal digit ?

Posted: 09 Nov 2012 04:59 AM PST

Let's say I want to apply the COMBINING DIACRITICAL MARK U+0300 to the character g in Word. A simple technique is to type g followed by 0300 followed by Alt + 'x', and I get g̀. However if I apply the same mark (U+0300) to the letter a, using the same Alt + 'x' technique, Word will print the .notdef character ꌀ, as a is interpreted as an hexadecimal number and Word will consider the character a0300 an invalid Unicode character. I wonder if there is any trick in Word to use the Alt + 'x' technique in those cases, i.e.. where the base character is an hexadecimal digit ?


Flip text

Posted: 09 Nov 2012 04:27 AM PST

There is really nothing new here, but I was reviewing some of the previous posts on this topic and thought it might be helpful to summarize the various methods in a graphic tutorial:  http://gregmaxey.mvps.org/word_tip_pages/rotate_text.html

The basic takeaways are:
1.  While you can rotate text in Word 2003 and earlier (earlier within reason), you can't produce true mirrored (flipped) text.

2.  The methods used to created mirrored (flipped vertical or flipped horizontal) text in Word2007 and Word2010 are different.

3.  The ability to produce text rotation effects is greatly expanded with the new graphics engine in Word 2010.

 

If any users see something that I missed or just flat out got wrong, please let me know.

 

 

 

Copy and Paste problem

Posted: 09 Nov 2012 04:05 AM PST

When I 'copy' text from a source, then open Word 2010 and seek to 'paste' the text, the popup menu has 'Paste Options' greyed out and unusable. The same with OneNote.  This is an irritant.  How do I effect 'paste' when an MS app is opened after 'copy'?

Remove Look Up from Task List

Posted: 08 Nov 2012 03:41 PM PST

When I click RIGHT MOUSE if the cursor tocuhes "Look Up" (which is all too often) I have a very long wait ahead of me, because it tries connecting to the Internet. . . . terrible feature in 2010.  Can it be removed?

Word 2010 Step by Step

Posted: 08 Nov 2012 01:23 PM PST

In Chapter 10, "Arranging Objects on the Page", I can not get the pictures to overlap.

 

Anybody have this problem or know what I might be doing wrong?

 

Thanks,

 

Scott

forced quotation marks error

Posted: 07 Nov 2012 02:15 PM PST

No matter what font I use (and this has been happening for over a year now), my MS Word forces the single and double quotation mark to become the ending one when it's supposed to be the beginning one.

My uncle said, ‚I'm tired!'

Our uncle said, „I'm very tired!"

Can anyone help?

word 2007 footnotes affects text wrapping when print

Posted: 06 Nov 2012 08:14 PM PST

The symptom:
In writing in Chinese,  2 footnotes have been added in one line, it is fine showing in the display, but when it is printed from printer, the same character appears again in the beginning in the next line.

The Chinese text font is in DFKai-SB and the number font is in Times New Roman. There are no spaces in between all Chinese characters in a same paragraph.

I'm not sure the problem is on Word or from the printer ? Please help.

Chicago Style 16th edition in Word 2010

Posted: 03 Nov 2012 02:14 PM PDT

The 15th edition of Chicago Style citation is pre-loaded into Word. Is there any way to get the 16th edition?

Trouble opening a saved file w/ Word 2010 Starter

Posted: 03 Nov 2012 02:13 PM PDT

I am getting an error message stating "File cannot be opened because there are problems with the content".   When I click on Details, there is "no error detail available".  I realize this may be due to my very boring 2012 Holiday Letter content, but after writing and editing the darn thing, I really would like to make copies and print this!  Does anyone know why I am getting this error after having no trouble editing it recently?  I have tried opening it various right click options and get the same message, etc.   Thank you!

Office Starter keeps giving me an error, unable to use it

Posted: 03 Nov 2012 12:33 PM PDT

how do i install microsoft starter that came with my computer i have tryed and keeps comming up error to try again  i have tryed 5 times and nothing

 
Subscribe to: Posts (Atom)