Pages

Search

MIIS or ADC? (Lotus Notes + Exchange 2003) - Microsoft Exchange

MIIS or ADC? (Lotus Notes + Exchange 2003) - Microsoft Exchange


MIIS or ADC? (Lotus Notes + Exchange 2003)

Posted: 21 Jun 2006 04:18 AM PDT

Thank you very much for your help
(both systems, Exchange and Lotus, are running with windows 2k3)

If I have understand well, using "Lotus Notes Connector", the users of each
mail system could see (and therefore use to "send to",...) in their
respective adress lists the users located in the other mail system, isn't it?

My doubt is that Microsoft always says to use "Lotus Notes Connector" in the
coexist period in a migration project between Lotus and Exchange, but for
permanent coexistence they always says to use MIIS.

Do you know the reason for this? There is any problem with the permanent use
of the connector?

Thanks in advance

Exchange System Attendant services doesn't start

Posted: 21 Jun 2006 03:30 AM PDT

Thx for the reply
but we already tried that kb article whit no result we also trieded this
articles
http://support.microsoft.com/default.aspx?scid=kb;en-us;283257
http://support.microsoft.com/default.aspx?scid=kb;en-us;830418
http://support.microsoft.com/default.aspx?scid=kb;en-us;295620
http://support.microsoft.com/?kbid=870918
http://support.microsoft.com/?kbid=833395

but the problem is still there




"Mark Arnold [MVP]" schreef:
 

Disable users=delete mailboxes?

Posted: 21 Jun 2006 01:37 AM PDT

Thanks for the reply, I have however not deleted the accounts but only
disabled them just to make sure to keep the mailboxes.
Still it is not possible to access them from Outlook nor the mounted mailbox
drive in Exchange 2000.
Does the advice below apply to Exchange 2000? All options are grayed out
when I right click the mailbox in System Manager.

/Regards Anders


"Andy David - MVP" <com> wrote in message
news:com... 


Internal vs. external email addresses

Posted: 20 Jun 2006 02:14 PM PDT

Thanks for the reply. In the default recipient policy (the only one) we have
only two types defined, an X400 and an SMTP set to "@here.local". I can't
define a policy for our external addresses; not all users have one, and the
ones there are have no particular pattern to the assigned name (the ISP set
some of them up, and we can't change them.)

On the users with an external address, I added an SMTP address manually in
ADUC. I then had to uncheck "Automatically update based on recipient policy"
and make the external address their primary SMTP address.

Is there a better way of handling individual addresses? Thanks again!

"Mark Arnold [MVP]" wrote:
 

Missing email messages after reboot

Posted: 20 Jun 2006 06:09 AM PDT

Absolutely positive they where not delivered. A couple where going to me and
I saw a couple of others that I new where important and asked the users if
they got them and they did not. We only have spam enabled on the gateway.

"Mark Arnold [MVP]" wrote:
 

priv1 data file size

Posted: 19 Jun 2006 07:11 PM PDT

Already ran offline defrag which increased the file size not decrease. Got
all of the errors out of the second exchange server and it seems to be
running now. How can I be sure it it running sp2?

"John Oliver, Jr. [MVP]" wrote:
 

Outlook/Exchange network timeout problems

Posted: 19 Jun 2006 05:19 PM PDT

Can you ping your Exchange Server by FQDN through the VPN?

--
John Oliver, Jr
MCSE, MCT, CCNA
Exchange MVP 2006
Microsoft Certified Partner

"Jeff Anonymous" <com> wrote in message
news:phx.gbl... 


exchange sp2

Posted: 19 Jun 2006 04:58 PM PDT

Aloha whatever,

Have you already carefully reviewed this article: http://support.microsoft.com/kb/813051/

-Ben-
Ben M. Schorr - MVP
Roland Schorr & Tower
http://www.rolandschorr.com
Microsoft OneNote FAQ: http://www.factplace.com/onenotefaq.htm
 


Hide user from GAL ??

Posted: 19 Jun 2006 02:21 PM PDT

His question may be how do I hide a user but the end problem may
actually be how do I hide these 2000 users. Since another poster already
gave the GUI response, I indicated how to do it without the GUI.

--
Joe Richards Microsoft MVP Windows Server Directory Services
Author of O'Reilly Active Directory Third Edition
www.joeware.net


---O'Reilly Active Directory Third Edition now available---

http://www.joeware.net/win/ad3e.htm



Jim wrote: 

Connect to the server failed. Error: 10061

Posted: 19 Jun 2006 02:04 PM PDT

When I use smtpdiag.exe after the test "Checking remote domain records." and
the "Checking MX servers listed for com".

If I do the diagnose on the exchange-server itself. The error is 10060
instead of 10061.

Thanks,
Ricky

"John Oliver, Jr. [MVP]" wrote:
 

Contacts in GAL

Posted: 19 Jun 2006 11:46 AM PDT

Something occured to me. Perhaps the ldap search filter being applied for
my GAL is not the defalt search filter. Could someone who has never mucked
around with this filter please post it?

Jeff

"FrodoBaggins" <com> wrote in message
news:%23CS$mt$phx.gbl... 


Exchange 2003. No space due logs. Backup failing.

Posted: 19 Jun 2006 10:12 AM PDT

Hi,

When the stores are in a clean shutdown state you may try to move all
logfiles to a network drive and then mount the stores. The stores should
mount without the need of the logs.

If the mount fails look in the application logs for clues

Leif

"AlphaDX" <microsoft.com> wrote in message
news:com... 


help export exchange 2003 directory and import as contacts in ex 2

Posted: 19 Jun 2006 08:00 AM PDT

That looks very useful. i will reserach it further.

"strongline" wrote:
 

Unable to move Routing Group Members

Posted: 19 Jun 2006 04:23 AM PDT

Ok. So my next troubleshooting step would be to open up ADSIEdit and see if
there aren't any lingering connector objects that don't show up in the ESM.

"MarkG" <microsoft.com> wrote in message
news:com... 

Separate people ho have same names

Posted: 19 Jun 2006 01:41 AM PDT


You can set a custom attribute so that you can set a filter rule for
all your customers........

Primary DC in crash exchange don't work

Posted: 19 Jun 2006 01:28 AM PDT

Do I read well that you enter the ISP DNS server(s) in primary and/or
secondary DNS settings on server and or workstation(s)? If yes, never do
that. Your AD relies on it's own DNS. I hope you installed and configured
the DNS service as well on the second server. If not, you will have a lot of
extra work and then it's better to grab the yellow pages and find a
AD/Exchange IT engineer a.s.a.p. (use DNS forwarders, ISA server or other
proxy servers to access Internet..)

--

Regards,

Menko den Ouden
MCSE+I+Messaging


"pupo" <it> wrote in message
news:phx.gbl... 


How do I stop NDR on Symantec SMTP V4.x?

Posted: 16 Jun 2006 01:37 PM PDT



In news:googlegroups.com,
RSC <com> typed: 

I reckon this is a Symantec question, then. :)


large emails are not being received

Posted: 16 Jun 2006 08:23 AM PDT

Hi,

Thanks you for posting again to request support for Microsoft Exchange
server.

However, I notice you have posted the same question in our newsgroup, which
I have already followed up.The Post ID is 34212535. So please check my
answer
there and if you need any further assistance on this particular issue,
please reply to me in that thread so I can follow up with you in time.
Also, please don't post the same question multiple times in the future so
that our engineers can work on your question efficiently. Your
understanding and cooperation is appreciated.

Thank you and Have a nice day.

Best Regards,

Steven Zhu
MCSE
Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security
================================================== ====
PLEASE NOTE the newsgroup SECURE CODE and PASSWORD were
updated on February 14, 2006.? Please complete a re-registration process
by entering the secure code mmpng06 when prompted. Once you have
entered the secure code mmpng06, you will be able to update your profile
and access the partner newsgroups.
================================================== ====
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from this issue.
================================================== ====
This posting is provided "AS IS" with no warranties, and confers no rights.
================================================== ====







Microsoft Word - Word 2007 in Window 8.1

Microsoft Word - Word 2007 in Window 8.1


Word 2007 in Window 8.1

Posted: 28 Mar 2014 02:25 PM PDT

I have two questions

First - when printing an envelope, the printer prints the envelope then gets more data from the computer and tries to print a second envelope.  I manually stop the printer then power off.

Second - Word places an extra line after each line, like double line space is set on.  I have gone into paragraph and set the line space to 1, but this doesn't fix the problem.  I miss the "clear formatting" that was in Word 2003.

TecRec

Automatically removing large spaces between words after switching to justify

Posted: 28 Mar 2014 02:00 PM PDT

Many times i have to deal with documents that have the paragraphs aligned to the left and need to be turned to justify. After doing this, those lines that have a line break at the end are forced to occupy the whole page width from left to right( minus margins), thus creating unusually large spaces between its words, especially if there are like 3 words on that line. now i need a solution to solve this, to make those large spaces regular spaces and to do this in a single command( or a short sequence of commands) for all the document. can it be done?

Saving as PDF is breaking Realtive Links to network locations

Posted: 28 Mar 2014 01:49 PM PDT

Hi,

I write procedure guides, the for security reasons need to be PDFs, but I am having a problem with my links.

Bookmark locations work just fine but I have a Relative link to a network share that when I save as a PDF doesn;t work right. 

Here is the link I am making:
Display text: \\server.domain.local\deployment

Link: file:///\\server.domain.local.deployment

When I Ctrl+Clink from Word, this link opens in Windows Explorer directly to the correct network location, just like I want it to. 

But when I save the doc as a PDF (using the built-in "Save as PDF" function in Word) my link instead opens in my web broswer and the link is changed to

Display text: \\server.contoso.local\deployment

Link file://server.contoso.local/deployment

This of course opens the correct location, but as the Index of \\server.contoso.local in a web browser.  While overall it can be used in this fashion, domain permissions are obviously not going to be respected correctly.  

Anyone have experience with this and a suggested resolution?
I'd like to be able to continue using MS Word for my tech manual writing, but this save as PDF thing is killing me. 

Thanks for helping gang!

Form fields - alternating styles of text

Posted: 28 Mar 2014 12:53 PM PDT

Is it possible to alternate text styles in a SINGLE form field in Microsoft Word 2010? (i.e. first line is normal, second line is bold, third line is normal, fourth is bold, etc. etc.)

What other restricted-editing options are available for this circumstance?

Customize mailing labels

Posted: 28 Mar 2014 12:23 PM PDT

I want to create standard mailing labels using Word 2013.  I have looked at some of the templates but they do not seem to let me insert graphics (clip art if I can find any).  The templates also seem to  be rather rigid in format.  Sometimes I like to do different things.  

Is there some way I can create "free-form" labels in Word 2013?

Is there any  training material available on line to help me?

Thank You.

Word 2013 - TOC - More Table of Contents from Office.com

Posted: 28 Mar 2014 12:10 PM PDT

When attempting to create a Table of Contents I noticed that I am unable to retrieve any styles from the "More Table of Contents from Office.com" button.  When I choose this option it comes up with "No Online Content Available".

How do I make content available?  Help Please :)

MS Office for iPAD

Posted: 28 Mar 2014 11:31 AM PDT

Kudos for finally getting this released.  You actually got me to buy Office 365 because of this.

When will we get Dropbox integration for open from and save to?

Thx!

Extract Comments and text selected linked with the comment

Posted: 28 Mar 2014 11:26 AM PDT

Doug Robins and Cindy Miester provided a wonderful macro to extract comments and line number here: http://answers.microsoft.com/en-us/office/forum/office_2010-word/how-can-i-copy-all-comments-from-a-word-2010/8dd48333-eb48-4f88-b0fc-9721f8e40516

I would like to know if there is a way to modify the code to extract the selected text which usually "anchors" the comment within the text.  In the image below what I need is to extract:

[conceived in Liberty]  [g1][A theme throughout Lincoln's Presidency.]

[so conceived] [g2][Referring to Liberty]

Any help please????

Voice Command Audible Microsoft, Word Processor, Internet and Products

Posted: 28 Mar 2014 11:08 AM PDT

I think it will be awsome to make Products Voice Command and Audible With Voice Command and Audible Microsoft, Word Processor,Internet etc. Speak your commands, automotive voice reads articles, blogs, etc., Optional download books, magazines, newspapers etc.Voice Command your documents into text etc.

Can I make offline mode the default?

Posted: 28 Mar 2014 10:56 AM PDT

I just started using Word for iPad and will be using it mostly in areas with no internet/ cell phone connection. Often for weeks at a time. It looks like I am able to save documents to the iPad without internet, but I have to fight my way through multiple pop-ups telling me I have no connection to do so. Is there a way to turn on an Offline Mode where it will just save the documents to the iPad as the default without warning me multiple times that I have no connection, then upload them when a connection is regained a week later?

Word 2010 and Word 2013 conflict in line breaks

Posted: 28 Mar 2014 10:32 AM PDT

I just posted this question (but probably different title) -- and now cannot find it posted. So here it is again --and I apologize if this is a duplicate:

I use Word 2010. When I open a document in Word 2013 the line and page breaks differ from the original. As an editor, keeping the lines and pages uniform is important. This has nothing to do with background pagination which is consistently deselected. However, when the sender of the Word 2013 doc converts to Word 97-2003 and I open it as such, the line and page breaks remain ok. Is there a way to open Word 2013 docs in Word 2010 where the line and page breaks remain the same?

 

 

Word only shows latest 20 posts from Sharepoint blog

Posted: 28 Mar 2014 10:10 AM PDT

I use Word 2010 to manage a Sharepoint Online 2010 blog. I just noticed when I open the blog in Word not all the posts are accessible. It looks like older posts are missing from the dialog that shows the blog's content.

I created a new instance of the blog in Word and it connected but showed the same limited list.

I also tried "launch blog program to post" from Sharepoint but that has never worked and still doesn't.

If it gives any clues, it appears Word only sees the last 20 posts - nothing after that. 

Is there a setting or something I'm missing? This feature is worthless if I can't access all the posts.....

Office and OneDrive not friends.

Posted: 28 Mar 2014 10:08 AM PDT

Unable to open and save documents in OneDrive. Office 365 Home Premium. Internet connection is OK. Documents opened only by using the OneDrive app.

UPD: Problem in the russian names of folders.

Conflict in line breaks between Word 2013 and Word 2010.

Posted: 28 Mar 2014 10:07 AM PDT

I use Word 2010. When I open a document in Word 2013 the line and page breaks differ from the original. As an editor, keeping the lines and pages uniform is important. This has nothing to do with background pagination which is consistently deselected. However, when the sender of the Word 2013 doc converts to Word 97-2003 and I open it as such, the line and page breaks remain ok. Is there a way to open Word 2013 docs in Word 2010 where the line and page breaks remain the same?

Can't find Styles Pane options

Posted: 28 Mar 2014 09:58 AM PDT

In Word 2010, when I click the tiny box at bottom right of the Styles Pane, a Style box opens. (It seems to be what I know as Styles in Use.) No three buttons, no Options dialog box. What to do?

Format Chapter Number in Footer in Word 2007

Posted: 28 Mar 2014 09:31 AM PDT

I have a legal document that uses Outline numbering and Styles to create the various levels.

When I use the Page Number, Format Page Number, Include Chapters feature, the chapter number is appearing as Roman Numerals.  I cannot find a way to change it to a regular number format.  The Heading 1 text, Article One, actually has the number spelled out so I know that it isn't following that style.

Any suggestions????  I've tried to find similar situations on this site and viewed all the suggested readings. 

Word cannot find link to (My)Documents folder

Posted: 28 Mar 2014 09:10 AM PDT

A friend of mine running Windows 7 and Office (probably 2007 but am not sure) cannot get access to her usual documents folder through Word or for attaching to email, although Windows Explorer seems fine.  Unfortunately she has some history of someone else setting things up for her and neither of us knows exactly what they did.  If she keeps her files on a memory stick she can manage for the time being but I want to re-organise & tidy up her C:\ file hierarchy and set shortcuts for her so that she has easy access from any Office/email program.  Does anyone have experience of this problem?  

trying to have a button paste a paragraph

Posted: 28 Mar 2014 09:09 AM PDT

So I am helping make a document more functionable for my work.

In this Word 2010 document I have this section that I will pass on to my customers who are supposed to fill it out. This one section is about a page in length and has radio buttons and drop-down menus in it. The customer is supposed to fill this section out for every product they have (which can range from 1-20 different products). Currently I have been just telling customers that if they have more than one product they just need to use copy and paste.

My task was to find out if there could be a way that I could use a button that could paste the previous page if the customer would need to do so.  So then in essence I would only need to put the page in once and then the customer could just click the button or whatever to add another section they could fill out.  Any help would be appreciated.

Thanks!

Calculating fields in Form using Word 2010 - Calculation not accurate

Posted: 28 Mar 2014 08:54 AM PDT

I have a form that has numerous fields being added together. I am getting the following value when the correct amount is just $560.00.

The field that is being referenced here has the following properties:

Can anyone help me figure out why my calculations are wonky?

Word 2010 page numbering stops at each new section

Posted: 28 Mar 2014 08:50 AM PDT

Working with a Word document (.docx) that was originally generated from a PDF using Acrobat XI Pro. Approx 90 pages, each page is a new section. When I try to insert page numbers in Word, they only go in to the starting section.

Is there a way to add page numbers that continue through each new section to the end of the file?

Thanks,

John

How to select the text in a character style, and then clear the style

Posted: 28 Mar 2014 08:37 AM PDT

My question is this: Is there a better way than what I have set out below to accomplish the objective set out in the title?

I wanted a quick and certain way for users to remove all the formatting applied by certain character styles (including any spaces that might be "invisible" to the user). I thought there should be an easy way to select all the text covered by a given character style that is "active" at the insertion point (IP) - after all, there is a somewhat similar functionality available with a right-click in Word, choosing "Styles" and then choosing "Select Text with Similar Formatting".

Since you can get the name of the style at the IP, it seemed that maybe something like this would work:

    strMyStyle = Selection.Style

    ...

    If Selection.Style = "MyStyle" Then

        Selection.Styles(strMyStyle).Select

        Selection.ClearCharacterStyle

    End If

    ...

However, the "Selection.Styles(strMyStyle).Select" syntax is not valid. In fact, the logic (or lack thereof) in how one can access the methods and properties of styles via Selection seems convoluted. I figured it best to take Jay Freedman's advice on this forum from a couple of years ago: "(Don't ask why -- that way lies madness.)"

So I came up with a solution that is quite flexible -- it is set out below. The user just has to put the IP in or immediately before or after the styled text, then run the macro (keystroke shortcut, right-click or other method). The macro ensures that the whole style is cleared. [I considered using Find, but at least for my purposes that left too much chance of "leftovers" or other problems. There are a couple of small inefficiencies in the macro, but they are insignificant and seem to make the logic a little clearer.]

Thanks for any advice you can give.

EdH48

Sub Remove_Character_Style()
'*** Removes "L93*" character style at IP or start of selection.
    Dim lngEnd As Long
    Dim lngStart As Long
    With Selection
        .Collapse wdCollapseStart
        lngStart = .Range.Start
        lngEnd = .Range.End
        Do While ActiveDocument.Characters(lngStart).Style Like "L93*"
            lngStart = lngStart - 1
        Loop
        Do While ActiveDocument.Characters(lngEnd + 1).Style Like "L93*"
            lngEnd = lngEnd + 1
        Loop
        ActiveDocument.Range(lngStart, lngEnd).Select
        .ClearCharacterStyle
        .Collapse wdCollapseEnd
    End With
End Sub

Word character styles that end in "Char" or "Char Char" or "Char Char Char", etc

Posted: 28 Mar 2014 08:14 AM PDT

Hello,

The following helpful tip from Cindy Meister discusses these annoying character styles and how to get rid of them:

Removing "Char" styles from a document

http://homepage.swissonline.ch/cindymeister/MyFavTip.htm#CharStyl

Sadly, I cannot get this code to work in 2013. I experience a COM exception problem when running similar code in VB.Net. I believe the article relates to a much older version of Word, so I wonder if it is still relevant.

Therefore, before spending too much time trying to fix this problem with her approach, I thought I would try the following different approach:

Create a "Char Char" etc style manually. Then delete it manually and see if the related paragraph style remains intact. If it does, my problem is solved, because we can easily write code to iterate through a document and delete all "Char Char" etc styles.

Sadly, however, I cannot figure out how to create a "Char Char" etc style manually. Can anyone walk me through how to do this?

Many thanks.

Keith

P.S. Sorry for not bringing up my actual question until the very last paragraph, but I thought the background context would be helpful to the reader.

error code 0x8802C007

Posted: 28 Mar 2014 07:00 AM PDT

Get this error code when trying to download a file from skydrive. Please Help

What is the maximum password length when saving a document in Word for iPad?

Posted: 28 Mar 2014 05:06 AM PDT

I can open a Word document in Word for iPad with a long password containing all 4 character types, but when I try to save the document this fails with a dialog box stating that the password is too long.

What is the maximum length in Word for iPad, and are there any limitations to character types used?

Word gives a 'shadow trace line' on the desktop screen after closing

Posted: 28 Mar 2014 04:43 AM PDT

When ever I close a  'Word 2013' document it does not go off clean from my desk top.

The margins remain there as a shadow with 4 corners.

This is seen only when the Word file is 'resized manually by dragging' - to see some other page also in front of me.

A screen shot of only one of the 4 corners of the shadows is attached.

This is problem is applicable only for Word.

Not for 'Excel' or 'power point' or 'One Note'.

No Physical problems with the computer.

Tried re-Installation of Office, but problem persists.

Please advise

Word's built-in dialogs all suddenly opening very slowly

Posted: 28 Mar 2014 04:27 AM PDT

For some reason all of Word's built-in dialogs are now opening very slowly -- they take a good 4 seconds or more; but all had opened relatively instantaneously until a few days ago. For example, the Font dialog (whether via CTRL+D or the ribbon group corner arrow), the Macro dialog (ALT+F8, or View> Macros> View Macros), and the Paragraph dialog (ribbon group corner arrow or ALT+O, P), all take an unnervingly long time to appear.

I unloaded all VBA and COM add-ins and the Normal template; no change.

Oddly enough, all of the custom dialogs (userforms) that I've built still launch immediately -- even those that do a lot of work in their Initialize events, such as creating a large array on the fly & loading it into a combo box.

What could be causing this? The identical setup on my very similar second PC behaves just fine. The only major difference is, that's a 64-bit machine and the problem PC is a 32.  The latter has alway been slightly less responsive, but nothing like this.

Excel and PowerPoint don't seem to have the problem, just Word.

Any ideas? TIA.

Mark

Where can I get information and support for Word for iPad?

Posted: 28 Mar 2014 01:48 AM PDT

None of the links, that are provided in the response to the pinned, locked post with this subject, work.  They all return "This web page is unavailable"

How add bullets to numbered list without the numbers being deleted?

Posted: 28 Mar 2014 01:14 AM PDT

I have noticed that adding bullets to a list (with numbers that were already there, meaning I added them myself), Word 2013 automatically deletes these numbers.

For example I add bullets to this:


3 Elements

(1) Conduct

(2) Circumstances

(3) Result

This is the end product:

  • 3 Elements
  • Conduct
  • Circumstances
  • Result

Is there some way to add bullets while retaining the (1) (2) (3)? I've searched around but haven't found anything helpful. I know you can do this in OneNote but I'd like to stay in word for this assignment. Thanks very much!

error

Posted: 28 Mar 2014 12:53 AM PDT

Keeps reading error has come to a problem.  What can I do

Error Message when opening any Microsoft software

Posted: 28 Mar 2014 12:32 AM PDT

When opening Microsoft Word I am getting the error message "Something went wrong - we couldn't start your programme. Please try again later."

Quick parts building block loads and then disappears

Posted: 27 Mar 2014 11:47 PM PDT

Hi - was wondering if someone can help me please (hopefully i have described the issue clearly)

I have multiple quick part text that is save into multiple categories in MS word 2010

The word template then contains multiple building block gallery content controls which filter the quick parts block that can be used in a particular area of the word template.

For some reason when i assign a particular gallery to one of the controls, the control loads with the choices that it has been assigned, and then disappears a few seconds later when i go to choice one, so i am unable to make the selection (the list refreshes and shows up as a blank list).  It only occurs when i select that particular category for the control, as all the others seem to work fine. 

I have tried recreating the quick parts, tried them as auto-text, tried calling them something else ,locating the control somewhere else in the document and even recreating the whole template again with everything fresh however the same issue occurs with that particular control.  

Am baffled, given all the others work  par the one and was wondering if anyone had any suggestions.

Thanks in advance.

Cheer 

Marchi


Where can I get information and support for Word for iPad?

Posted: 27 Mar 2014 11:05 PM PDT

Where can I get information and support for Word for iPad?

by default, documents saved as templates

Posted: 27 Mar 2014 08:55 PM PDT

When I launch Word 2010 the blank document that opens is .dotx.  How can the default be changed to .docx?   I would prefer to save the template settings if possible.

Thank you.

Word 2013 Just Started Freezing - What do I do?

Posted: 27 Mar 2014 07:02 PM PDT

I use Word 2013 for business documents.  For the first 6 months, everything is fine.  Now, Word is freezing half way through my document typing.  I have added nothing new to my computer to make this happen.  Do I re-install 2013 or what is the best method to take to repair this problem?  Thank you.

Can I print documents from Word for iPad

Posted: 27 Mar 2014 06:39 PM PDT

How can I print a document from Word for iPad? It looks like the only thing I can do is email it or print it out from a PC.

Importing stylesheets in Word 2013

Posted: 27 Mar 2014 06:39 PM PDT

Prior to using 2013, I was able to import style sheets to existing (horribly formatted) documents without issue using the organiser (close, nave to doc with template with styles you want, copy them to the open file etc).

Now when I follow the process, the styles come across and the numbering and indentation remain intact however the font changes and each style needs to be modified/updated individually.

Is this a known problem and is there a workaround or am I totally missing something?

This is killing me and I've burned more than enough time on it!

Thanks in advance.

Trying to restore autosave/autorecovery files

Posted: 27 Mar 2014 05:32 PM PDT

You know how they say there are no stupid questions?

I had a flash drive fail recently. For various reasons, most of which ultimately stem from the fact that I am an idiot, I had a large amount of important work saved to the flash drive (mostly DOC and DOCX; maybe a few RTFs) and nowhere else. I'll spare you the boring details, but the flash drive is dead, and for now I am out that large amount of important work.

The computer in question is running Windows 7 and has Microsoft Office 2010 Starter installed onto what I believe is a hard drive partition (it has the drive letter Q, separate from C, but I'm virtually certain it's not on a separate disk). My only hope at this point is to use an "undelete" program to check for autosaved versions of those files, and I'm wondering where to look. Right now I'm looking in 

C:\Users\myname\AppData\Local\Microsoft\Office\UnsavedFiles

and I'm not finding anything too interesting, as I think those are only files that I at one point had open, but never saved to a physical location.

What I'm wondering is whether there are any other folders that might also have at one point contained any files of interest, specifically autosaved versions of files I was working on that were stored on the flash drive; I know I've seen autosaved files that weren't saved to the same directory as the file itself. And I've recovered unsaved Word documents during power outages, etc., so I know they're being saved somewhere. Should I poke around in Q as well, or is that simple application data?

I'd like to do the same process with some Excel files as well (opened in Excel Starter, obviously), but I'm much more concerned about the Word files at this point).

Microsoft Word 2013

Posted: 27 Mar 2014 05:31 PM PDT

My Microsoft Word  will not open, I keep getting an error message that says  "Something went wrong try again.

MS Word List Indent Options

Posted: 27 Mar 2014 04:57 PM PDT

Hi Guys,

Can you explain to me the difference between the number position and text indent when adjusting the indent options for a list?

Both seem to perform the same as the other.

Thanks in advance.

KB2953095 Microsoft Word vulnerability and Word 2013 SP1

Posted: 27 Mar 2014 03:55 PM PDT

Is it a mistake that 2013 SP1 isn't mentioned?

http://technet.microsoft.com/en-us/security/advisory/2953095

Microsoft CRM - Custom fields more flexible

Microsoft CRM - Custom fields more flexible


Custom fields more flexible

Posted: 26 Nov 2004 07:19 AM PST

the information below is UNSUPPORTED by Microsoft
check the metabase database
find table attribute
look at fields ValidForCreateAPI, ValidForUpdateAPI, ValidForReadAPI
those are flags to indicate user access to the attribute
ValidForCreateAPI ---> enable/disable user to edit the field/attribute upon
creation of new record
ValidForUpdateAPI ----> enable/disable user to edit the field/attribute upon
editting record
ValidForReadAPI ----> enable/disable user to view the field/attribute

Note: this three flags has direct consequences to ALL FIELDS, so use them
wisely

henyung


24 hours display mode

Posted: 26 Nov 2004 03:35 AM PST

Hello Pieter.

Yes, this is possible:

Home > Settings > System Customization > configuration (or System settings,
I don't know I have it in german. This is below general jobs). Then you go to
calendar and can choose HH:mm .


have fun.

"Pieter Versteijnen" wrote:
 

Crystal paper size

Posted: 26 Nov 2004 01:15 AM PST

Hi Savage

I had already setup the paper size in the printer setup.

But when vewing the report from CrystalViewer, the screen still shows a
Letter sized page. When I select to print, and change the paper size,
CrystalViewer prompts a warning :-
"The report you are about to print is a pre-formatted imageof the actual
report data.
Changing the paper size may result in loss of objects in each page."

Any other ideas??

"savage" wrote:
 

Activity security question.

Posted: 25 Nov 2004 11:30 AM PST

User A and B have the same privileges to Activities:
Create: User, Read: User, Save: Business Unit, Remove: User, Add: Business
Unit, Add to: Business Unit, Assigne: User and Share: Organization.

Thank you,
[]'s
Vinícius Pitta Lima de Araújo

"Rafal Perwejnis" <microsoft.com> escreveu na
mensagem news:com... 
about 
other 
it's 
to 
owner of 


Crystal Reports 9.2 Logon Failure on data verification

Posted: 25 Nov 2004 06:15 AM PST

Hallo savage, thanks for reply but it won't work. But maybe it's my mistake,
because i conect to the report with the administrator-account i defined
during installation. This isn't a domain account.

Do you know where i can type in a new account? I tried with some
CRM-accounts and fail.

Mike

"savage" wrote:
 

Outlook Client functions

Posted: 24 Nov 2004 06:03 PM PST

I don't have the Microsoft CRM folder. I saw that in the demo after I
posted this message.

Have any idea why I don't? Outlook 2003 was installed before I went through
the whole CRM install. I don't imagine that makes any difference. The COM
Add-in is theoretically loaded. It seems pretty simple. I'm not sure what
I'm missing.

Thanks for your help.

Gary

"Guy Riddle (Snapdragon)" <guy@(nospam).mscrm.com.au> wrote in message
news:phx.gbl... 


MSCRMExperts.com

Posted: 24 Nov 2004 03:28 PM PST

It is DNN... I mean to customize it more as we grow and I can afford to
hire a proper graphic designer. You should be registered by now. I had a
problem with the email server earlier.

Drop me a line if you have any questions.

com

"Razorback" <microsoft.com> wrote in message
news:com... 


Can not publish customatization

Posted: 24 Nov 2004 12:43 PM PST

Thank you very much for the input. Unfortunately removing all customizations
(as much as I can find them) did not help. Here is another error regarding
this problem.
Any suggestion will be greatly appreciated.
Thanks
Event Type: Error
Event Source: DMSNAPIN
Event Category: None
Event ID: 0
Date: 11/25/2004
Time: 11:31:43 AM
User: N/A
Computer: DIGITALCRM
Description:
SelectPublish_Load : 'ResourcePool' is not supported on the current
platform. , StackTrace : at
System.EnterpriseServices.Platform.Assert(Boolean fSuccess, String function)
at System.EnterpriseServices.Platform.Assert(Version platform, String
function)
at System.EnterpriseServices.ResourcePool..ctor(Trans actionEndDelegate cb)
at System.Data.SqlClient.ConnectionPool..ctor(Default PoolControl ctrl)
at System.Data.SqlClient.PoolManager.FindOrCreatePool (DefaultPoolControl
ctrl, IntPtr SID)
at
System.Data.SqlClient.SqlConnectionPoolManager.Get PooledConnection(SqlConnectionString options, Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.ApplicationBlocks.Data.SqlHelper.Execute Dataset(String
connectionString, CommandType commandType, String commandText, SqlParameter[]
commandParameters)
at
Microsoft.Crm.Tools.ImportExportXml.SelectPublish. SelectPublish_Load(Object
sender, EventArgs e)



"Razorback" wrote:
 

Benchmark performance of CRM

Posted: 24 Nov 2004 10:46 AM PST

What do you do to improve performance? Our experience has been that MS
CRM is slow (almost unusably slow on occasion) and we have even seen
this with an out of the box microsft setup. e.g. on one of the MS CRM
courses using an unaltered microsft image for the system we have seen
delays of 15 seconds and upwards on updating screen displays, logins etc.

Matt Parks wrote: 

MSCRM with word automation

Posted: 24 Nov 2004 05:59 AM PST

What about the info path stuff, it works really great, and it is straight
into any office package
regards
Rihan
"Stephen Redmond" <nospam> wrote in message
news:%phx.gbl... 


View Editor / View Manager view GUIDs

Posted: 23 Nov 2004 04:19 PM PST

Thank you. That worked great!!

Just as an FYI for anyone else searching this group later, here is a
compiled list of view GUIDs:

00000000-0000-0000-00AA-000010001899 My Activities
00000000-0000-0000-00AA-000010001900 Open Activities
00000000-0000-0000-00AA-000010001901 Closed Activities
00000000-0000-0000-00AA-000010001902 All Activities
00000000-0000-0000-00AA-000010001903 Activities Associated View
00000000-0000-0000-00AA-000010001911 Homepage
00000000-0000-0000-00AA-000010001951 Sales Process Activities Subgrid
00000000-0000-0000-00AA-000000666100 Activities Advanced Find View
00000000-0000-0000-00AA-000010002000 Associated View: Notes
00000000-0000-0000-00AA-000010001203 Associated View Opportunities
00000000-0000-0000-00AA-000010001204 Articles
00000000-0000-0000-00AA-000010001205 Associated View: Teams
00000000-0000-0000-00AA-000010001206 Associated View: Competitors
00000000-0000-0000-00AA-000010001207 Associated View: Business Units
00000000-0000-0000-00AA-000010001208 Associated View: Roles
00000000-0000-0000-00AA-000010001209 Articles - Manage KB Search
00000000-0000-0000-00AA-000010001210 Associated View: Contacts


"Matt Parks" wrote:
 

Crystal 9 pro: Enterprise Icon not there

Posted: 23 Nov 2004 08:11 AM PST

Ok, Thanks,

Sylvie

"Peter Lynch" wrote:
 

Open contract grid from Case.

Posted: 22 Nov 2004 11:17 AM PST

I resolved my problem.

Sylvie

"Sylvie" wrote: