Pages

Search

Microsoft Word - Repeating a Text Form Field in a Document Header

Microsoft Word - Repeating a Text Form Field in a Document Header

Repeating a Text Form Field in a Document Header

Posted: 26 Aug 2014 01:31 PM PDT

In the attached document (form), the table on Page 1 includes text form fields that are filled in by users.  I need the contents of each field to populate into duplicate fields in the document odd page header.  The users can't populate the header because the header is disabled when the form restriction is on.

Document is not attached - didn't realize when I submitted this question that it was going out to the microsoft community and the form has confidential content.

Tracked Changes Lost in Document when E-mailed

Posted: 26 Aug 2014 01:15 PM PDT

I believe this question has been posed before, but some time has passed and the answer given didn't solve my problem.  I apologize in advance if this seems repetitive. 

I recently tracked changes in a short document (Word 2013) with the intent to e-mail it to another person for review and finalization.  I noticed that when I attached the document to the e-mail (Outlook), when opened, the document no longer showed any of the changes (just the line on the edge).   I e-mailed it to myself (as a test), so I know the settings were correct, but it took significant messing around  with the settings to display even one of the changes in the document.  Ultimately, I had to send the document with changes shown in blue font which I applied manually.  Is there a setting somewhere that can be changed to allow a recipient to view these changes without jumping through hoops?  If not, law firms in particular will have lost a significant and frequently-used tool when it comes to collaboration.

Thanks for any advice or hints. 

Cannot Change Imported Clip Art Into a Msoft Office Drawing Object

Posted: 26 Aug 2014 12:45 PM PDT

I recently upgraded to Windows 7, Office 2013. Previously I used XP and Office 2003. With the XP configuration I could import clip art from the internet, select 'Edit Picture' and in most cases I could convert the 'Imported Picture' to a 'Microsoft Office Drawing Object.' This allowed me to delete unwanted parts of the picture, change colors or resize selected parts,  and then regroup the remainder back into a single object. I did this on a 'Drawing Canvas'.  With the Windows 7 configuration the 'Edit Picture' option is never active for clip art in a Drawing Canvas. If I import to a Word page (rather than into a Canvas) then in RARE occasions the Edit Picture options is available but the result is not easy to edit and Group-Regroup is not active.  ( In a couple of rare cases I actually ended up with something like a MSoft Object.)  I notice that Office 2013 has many options under 'Format Picture' but these do not help me.  This is very frustrating because using clip art to write stories for my grandchildren is one of the main uses I have for a computer. Note: the path I use is' Insert>Online Pictures>Office.com Clip Art.' 

Any help will be much appreciated. 

 

Error message on Word Microsoft Office 2007

Posted: 26 Aug 2014 12:17 PM PDT

When I open Word ( Office 2007 ) appear an error message : "problem sending the command to the program" ... And I can' t acces the Word file, it shows to me a blue page. In Microsoft site I've seen the same problem ,but for Excel not for Word. How do I solve that ?

How to shrink space above and below text

Posted: 26 Aug 2014 11:53 AM PDT

What are my options for shrinking the space above and below text?

I'm thinking of specific text, where I'll know if there are any descenders (usually not, but not always).  The text is for signs that can be read by motorists passing our house, so eliminating un-necessary space between lines makes my sign more legible.

I know how to get to the Font settings, and its' Advanced options, but then I get lost on the definitions "Spacing", "Position" and "Kerning"

Mysterious Problem: Comments sometimes won't print

Posted: 26 Aug 2014 11:34 AM PDT

I have a very weird problem with Word.

It seems to happen only to me and it's happened with a number of documents in both Word 2010 and Word 2013, and on a desktop and now on my laptop!

I have a document with track changes and comments. Both are visible on my screen and in print preview, but when I print the document, the track changes are there but the comments aren't. There is a space for the comments, but not the comments themselves.

Other documents will print okay. Tomorrow, this one will probably print okay -- it seems totally random. Sometimes if I reboot, it will fix itself.

I've tried sending it to different printers, including to the PDF printer, and the same thing happens. There's a big blank space on the right to house the comments, but no comments.

When a colleague printed the same file, it printed fine.

Does anybody have any idea what could be going on? As I said, this has happened on two different computers with two different versions of Word - so it just isn't making any sense.

Mail merge with single first page, and multiple second pages

Posted: 26 Aug 2014 11:15 AM PDT

I'm having a really hard time figuring this one out...

I'm trying to use a mail merge to create a document that has a single first page, and then one or more second pages. 

This is my example (i work for the judiciary)

I have a one-page letter, cover sheet that is generated for each defendant.  It is a letter to a defendant stating that they are scheduled for court.

Then after this first page, there could be one OR more "second" pages.  i.e., there is a one-page court order that is generated for EACH DIFFERENT case that they have in our system.

Merge data spreadsheet (which is probably not set up right) looks something like this...

Name Address Phone Case #
Joe Smith 111 Street Ave 555-555-5555 11111-001
Joe Smith 111 Street Ave 555-555-5555 22222-002
Joe Smith 111 Street Ave 555-555-5555 33333-003
Jane Doe 222 Ave Road 666-666-6666 99999-009
Jane Doe 222 Ave Road 666-666-6666 88888-008
Rick Williams 333 court drive 777-777-7777 00000-000

The Excel sheet (outlined above), is auto-filled with a macro.  So the user isn't populating it manually.  It is grabbed from a different system...but i assume that is irrelevant to the question.

This table is a little bit dumbed down...there are a lot more fields.  But this is the general result that I'm looking for...

(Cover Letter Sheet)

Joe Smith

111 Street Ave

555-555-5555

(new page (first court order))

Case # 11111-001

(new page (court order for next case))

Case # 22222-002

(new page (court order for next case))

Case # 33333-003

(new page (for next def's cover letter))

Jane Doe

222 Ave Road

666-666-6666

(new page(first court order))

Case # 99999-009

(new page (court order for next case))

Case # 88888-008

(new page (for next def's cover letter))

Rick Williams

333 Court Drive

777-777-77777

(new page (for def's court order))

Case #: 00000-00

At first I was running a macro that stored both the cover letter and court order in autotext entries (this is how i've accomplished this type of problem before).  So, the macro inserted the cover letter autoext entry for the first person, fills in the address, etc.  Then loop through each case, inserting an order, filling in the case number, etc., for each case that they have.  Wash, rinse and repeat.  However this is a royal pain as trying to use section breaks, etc. in this situation is a nightmare.  It just never seems to follow the section break rules that i set up for it.  So i thought that a mail merge would be faster and much cleaner.  The second page(s) (court order) is a very complicated table...it has many many rows, columns, and lots of merge fields.  I tried looking into using headers, different first page, etc., doing nested mail merge, but neither seemed to help me solve my problem.

Any advice is greatly appreciated.

Is this something that can be done?  I'm pretty familiar with VBA, so using code to do this wouldn't be a problem..

Word 2013 won't save my paragraph formatting changes to the default template

Posted: 26 Aug 2014 11:11 AM PDT

When I open a blank document and start typing, the default formatting is applied.  When I go to change this (eg paragraph and line spacing), then set that as default, it doesn't apply the next time I create a new document.  Very frustrating. 

Display Commentor Name Instead of Initials in Comments in Word 2010

Posted: 26 Aug 2014 10:57 AM PDT

There are three people in my company who are working on a document ... all have the initials MC ... we are all adding comments to the document as a way of tracking the interaction. Problem is that the document displays all comments as [MC#] ... reviewing on screen is OK because the comments are differentiated by color by person - but reviewing the printed document is very difficult as the comments are renumbered every time someone adds a new comment (so [MC2] has been four different comments in three iterations of the document.

Is there anyway to force Word to display the User Name instead of initials in the comments?  Out company policy is such that the Office Personalization fields are populated with the correct User Names and initials so that fix didn't work.

I've done an internet search on at least 5 iterations of the question and haven't come up with anything.

Thank you in advance for your help.

Maria Cortina

"Freeze" a document to prohibit change

Posted: 26 Aug 2014 09:51 AM PDT

Some weeks ago, I made a rather large report on 27 pages with paragraphs, pictures, tables, text boxes, watermarks and all the other stuff you'd put in a report.

I marked the file as final and added my digital signature, so that everyone would know that this work i complete and should not be altered.

However, when I open the file on another computer which has Office 2013, the textboxes move slightly around, causing the text to rearrange and thus making number of pages to alter. Also, some tables would rearrange slightly.

My question is, is there a way to stop Word from rearranging minor details like that? As the file is marked as the final version and editing has been deactivated, it would stop people from altering it. Because it is supposed to be printed, it is quite annoying. The best thing to do would probably to freeze it somehow, if that is possible. I've already saved it as a PDF, but some details are lost in it, like watermark strength.

Also, if I open the document back at home, in Office 2010, nothing is changed.

email addresses in 2010 docs

Posted: 26 Aug 2014 09:36 AM PDT

used to be able to type email addresses in doc, hit return and they would be ready to connect to addressee; no longer works that way; Solutions?

Print Mailing Label problem

Posted: 26 Aug 2014 08:42 AM PDT

Using Word 2010, when I print a mailing label the address automatically prints underlined, sometime as if it's a hyperlink. How can I turn this off?

retreive a document lost on 365 for ipad

Posted: 26 Aug 2014 08:24 AM PDT

Any ideas how to recover a document lost on 365 for ipad?  I have auto save and I last revised/accessed it on July 26th, but it doesn't show up in my available folders, and I don't know how to access a general search function from the ipad menu options.

please, please help.

thank you,

Word has write protected all my documents

Posted: 26 Aug 2014 07:32 AM PDT

Hi

I have today opened a previously saved document only to discover it is write protected. When I enable editing and try to save it I get another box telling me to change the settings He says " you have attempted to save a file type (word 2007 and later documents and templates that have been blocked by the file block settings in the trust center"

I tried to open three others all giving the same message when I try to change the content and save them again. All the documents are 2013 edition so I don't ndertsnad what has happened and all the documents have been compiled by me on the same computer so they are not protected and benver have been.

Any ideas how I can clear this nuisance off my documents?

Microsoft word 2013 wont download

Posted: 26 Aug 2014 07:17 AM PDT

I spent $114.11 on microsoft word and followed the steps to download it onto my computer, the computer even restarted to make sure the app was downloaded but i cant find it anywhere! there are no applications on my computer for word at all. And this is the second time ive done this, years apart and

the first time was only a trial but this time I bought the package so that I wouldnt have to buy windows again. But  it's not working. Maybe i just dont know where to find it on my computer, will someone help? I don't want to believe that I just wasted another $100.

Word 2013 not working

Posted: 26 Aug 2014 05:26 AM PDT

Word 2013 will no longer open and says it has encountered an error

This appears to have happened after a Microsoft Update in July 2014

Despite removing and completely re installing the whole of office word will not work

Other applications in office work like excel it is just word 2013 that will not work

This is all very frustrating and has rendered my PC uselessMy PC is an HP Envy

Please could anyone help me

Thanks,

Jon Leadbeater

"How to turn on spell check in Word 2013"

Posted: 26 Aug 2014 04:46 AM PDT

I have Office 365 and Word has suddenly turned off spell check.  When I try to turn it on, it says that there is no dictionary for this language "American English."  How do you get back the spell check?  I don't even know how I turned it off.

Not able to insert building block entries with F3 when document opened from Share Point

Posted: 26 Aug 2014 03:38 AM PDT

Hi Experts

I am not really sure wether this is a Word or Share Point problem (?) I have created a document in Word 2010 and uploaded to OneDrive on a Share Point 2013 solution. If I open the document in Word (not in the WebApp) and type the name of a building block I need to insert followed by F3 a message is briefly show in the status bar saying "The specified text is not a valid building block name". However if selecting the building block from Insert, QuickParts there a no problems inserting the building block.

If saving the document to a local drive typing the building block name + F3 will insert the building block.

Any ideas?

Sudden fast-forward DELETE in Word 2010

Posted: 26 Aug 2014 03:14 AM PDT

I was typing a document in Word 2010, which I am well familiar with, when suddenly, without my apparently having touched anything by mistake or leaned on the keyboard, the document went into fast-forward-delete. I haven't lost much but the delete has now reached the end of the document and I can no longer make inputs although I can move the cursor. A small blue horizontal rectangle has appeared under the position of the space next to the last letter in my document. Can someone help please? I think this may be finger-trouble (Bullguard anti-virus is installed).

Thank you.

Martin

Disable cloud features

Posted: 26 Aug 2014 02:41 AM PDT

Hello everyone !

I want to buy a licence for word, but all i see on the store is these cloud features which i don't care and don't want due to privacy interests.

I see that we can install locally on both pc & mac (mac used here), and save documents locally rather than in the cloud (unbelievable...), okay.

But a miss-click is quickly possible, so is there a way to disable all personnal data send and all cloud/skydrive functions ? It's not mentionned in the office faq.

Thanks for replies ! :)

Document Properties Disappearing

Posted: 26 Aug 2014 02:15 AM PDT

I'm trying to add a document property COMPANY but every time I update (F9) or save, the property disappears.  It is not visible in document contents once I have added it either.  Strangely however, the property TITLE does not disappear and is visible in contents.  Any suggestions as to why this might be happening and if I'm missing something in regards to locking it into the properties?

Note: I am trying to create a header with fields for both TITLE and COMPANY, however, when saved or updated, only the company property disappears.

Thanks.

Hacking Word normal.dotx so as to add more than two Theme Fonts?

Posted: 25 Aug 2014 11:48 PM PDT

I have long been slowed down by the vast number of fonts displayed in the Word fonts drop down.

The addition of the ability to set theme fonts is cool but one can only set one font (or one for headings one for content).

I would like the ability to set a small subset of fonts so I do not need to scroll down the massive list of fonts. I use about

5 fonts, not 200 (?).

I am aware that there are other "solutions" (e.g. deleting fonts) but it is changing the fonts list so that my few fonts are always at the top that I am after so I would be greatful if you would be so kind as to limit this thread to ways of adjusting the word font dropdown menu, if there are any.


I tried hacking the theme font xml file in
C:\Users\me\AppData\Roami
based on
http://msdn.microsoft.com/en-us/library/documentformat.openxml.drawing.majorfont%28v=office.14%29.aspx
Adding
<a:font script="0TNR" typeface="Times New Roman"/>
hoping for a new shortcut at the top of the massive fonts list but no go.

Tim

Word 2010 - Image not showing Alt text on hover

Posted: 25 Aug 2014 11:07 PM PDT

Hi all,

I have created Alt text for the image in Word 2010, but I' m facing some problems like:

1) On hovering Alt text is not shown, and

2) How to make that Alt text to be narrated (on clicking, hovering or by any way) for that image

Regards,

Tushar Rastogi

Repeating Macro Changing Font and Size and Style

Posted: 25 Aug 2014 10:02 PM PDT

I need a repeating macro that could do the following in a specified folder:

1. Change all Fonts to Times New Roman

2. All font size to 12
3. Then have the first line of text to have a Style of Heading 1
4. Save the file as .doc

Then possibly have it call another macro to have it do a Save As .docx

Word (Office 2013) continuously shuts off!

Posted: 25 Aug 2014 08:23 PM PDT

Hello,

I have just got a new laptop with Windows 8.1 and purchased the Office 2013 suite. I just started using Word (offline, without signing in as I finally figured out how to do that). I typed the first couple of lines and it closed off before I saved anything. I started it again and saved my document ahead and started working but it kept doing the same every few minutes. So frustrating as I cannot get anything done and I keep losing some of what I write between the saves.

Can someone tell me if there is something wrong with my "new" Office 2013 or is there something wrong I can be doing or I should have done? 

I am concerned if this is a way to say that Microsoft products are all geared towards saving the work in the clouds and this is to encourage the use of the OneDrive software? 

I really appreciate help as I need to use Word for sensitive projects and work. 

Thanks.

 

Word 365 very slow to open emailed/ web-based documents

Posted: 25 Aug 2014 07:57 PM PDT

I've been using Office365 for about a year now with no problems, but recently started having a problem opening Word documents when I receive them by email or from a website (locally stored documents don't seem to be a problem...). These are mostly very small, routine, one to five page, basic word docs (no fancy formatting, no photos etc. - - - just text. It is frustrating because (1) it can take up to several minutes for the document to load, and (2) my PC becomes unresponsive during this time - - cannot open or close other applications. I am using a desktop PC, Windows 8.1 (fully updated), Office 365, Rogers cable internet at 60mbps. Any help would be greatly appreciated! Mike Hyde, Ottawa, ON

Adding to and/or deleting dot point paragraphs in a protected form

Posted: 25 Aug 2014 06:58 PM PDT

I have a protected form.  There are a couple of spots in the form where the user arrives at a form field at the end of a bulleted list that has a bullet and says, "Add any other items that may be required, otherwise press DELETE".  What code would I write to allow the user to add to the list but the entire paragraph is deleted if the user presses "DELETE"?

Why does my shadding in MS words 2010 always dissapear when I opened it the next time

Posted: 25 Aug 2014 06:56 PM PDT

Hi guy, I uses table in my Words Doc.. and I use the shadding tool to shade the boxes . However the next time I opened the shaddings are gone! It started happening 1 day ago and out of a sudden some of the shade I did reverted. Please help!

Insert a table into Word

Posted: 25 Aug 2014 05:28 PM PDT

Hi there,

I inserted a table into word and now there is a small blue box that appears to the right of any text in it, otherwise is just in the upper left hand of the cell. What is this box?

Thanks!

How to make sub-numbering headers under existing headers

Posted: 25 Aug 2014 05:03 PM PDT

Hi, all, I paragraphed my doc with a set of headings (level 1) using 'Numbering' in Word 2010. Now I want to make paragraphs in each section. My question is how to make level 2 headings using 'Numbering' under existing heading number, e.g., 1.1, 2.2, so that the sub-numbers follow their section heading numbers.

cheers

Word 2013

Posted: 25 Aug 2014 04:49 PM PDT

Whenever I save a Word Document, it saves it, however, it saves it as Apache Open Office 4 and when I open it up again by clicking on the file it opens as Apache Open Office 4.

If I go into Word and open the document, it opens as a Word Document.

Why won't it save as a Word Document?

With a Surface Pro2, how do I print in greyscale rather than color?

Posted: 25 Aug 2014 04:41 PM PDT

I have a Surface Pro 2.  I am trying to print in "greyscale" rather than "color".  Neither my "printing preference", or my "printer properties" screens offer

a print color choice. My printer is an Epson WP-4530 (all in one) and I have three other computers using it; and, they all can select "greyscale" in the print preferences,  Does anyone have a suggestion as to how to print in greyscale; or, is it just not possible to do so with a Surface Pro2 ..*** Email address is removed for privacy *** 

UAC in Vista has to be turned off to run MS Office - Microsoft Office forums

UAC in Vista has to be turned off to run MS Office - Microsoft Office forums

UAC in Vista has to be turned off to run MS Office

Posted: 20 Apr 2007 08:32 AM PDT

Office 2007 is a Upgrade version that you installed or a Full Retail Version.

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"Patrick Schmid [MVP]" <mvps.org> wrote in message news:phx.gbl... 

Word Converters for Office 2007

Posted: 20 Apr 2007 07:04 AM PDT

WordPerfect is still being sold, WordStar 7 isn't. To put it rather bluntly,
why should Microsoft bother?

--

JoAnn Paules
Microsoft MVP - Publisher

How to ask a question
http://support.microsoft.com/kb/555375



"Jim Gainsley" <com> wrote in message
news:supernews.com... 

"Missing" Cab files installing office 2007 on localized Vista

Posted: 19 Apr 2007 10:18 AM PDT

Hi Frank,

To add to Leon's reply.

Did you burn a CD/DVD from the image or are you mounting it as a virtual drive to do the installation? There have been problems
reported, for example, using Nero and the CD images it creates under Vista rather than another burner or an ISO mounting approach.

Was there a previous installation of Office 12/2007 on this computer?
(Beta or release product)?

Also, what is the 'localized' Vista definition you're using in this case?

=============
<<"Frank Laurijssens" <nospam> wrote in message news:com...
To rule out any issues with the DVD, I downloaded a new ISO from Technet
Direct, to no avail. Even another DVD, O2k7 Enterprise english does not
install, it only fails at another point:

Executing chained package: EnterpriseWW
04/20/2007 09:59:47 Installing chained package: EnterpriseWW
PERF: TickCount=8765914 Name=Verify MSI local install source
Description=Begin function
OSE is detected as a registered service. Service binary is reported at
location: C:\Program Files\Common Files\Microsoft Shared\Source
Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files\Common
Files\Microsoft Shared\Source Engine\OSE.EXE
File at F:\Enterprise.WW\ose.exe has version: 12.0.4518.1014
File at C:\Program Files\Common Files\Microsoft Shared\Source Engine\OSE.EXE
has version: 12.0.4518.1014
Running OSE version 12.0.4518.1014
OSE is detected as a registered service. Service binary is reported at
location: C:\Program Files\Common Files\Microsoft Shared\Source
Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files\Common
Files\Microsoft Shared\Source Engine\OSE.EXE
File at F:\Enterprise.WW\ose.exe has version: 12.0.4518.1014
File at C:\Program Files\Common Files\Microsoft Shared\Source Engine\OSE.EXE
has version: 12.0.4518.1014
Running OSE version 12.0.4518.1014
LIS: wait for package "{90120000-0030-0000-0000-0000000FF1CE}" to complete
caching
LIS failed to cache download "{90120000-0030-0000-0000-0000000FF1CE}-C"
resource "EnterWW.cab". Cache Error 0x80070017 <<
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Expression web - silent install

Posted: 19 Apr 2007 12:42 AM PDT

Thanks for that - I couldn't find that group earlier; not sure why not :-)

By weird coincidence someone has asked exactly the same question in there
today so I'll wait and see if an answer comes up.

I don't fancy visiting over 2000 computers and running setup :-)
--
Steve Rochford


"Another Brian" wrote:
 

Can't Install Office 2003 after Office 2007

Posted: 17 Apr 2007 03:46 PM PDT

Hi Gerry,

It's a rare occurrence that affects only a few people due to whatever
system configuration they have. Obviously the ones that don't have any
problems removing Office 2007 don't post here, so you might get a wrong
impression from the fairly regular posts here about removal problems.

Patrick Schmid [OneNote MVP]
--------------
http://pschmid.net
***
Outlook 2007 Performance Update: http://pschmid.net/blog/2007/04/13/105
Office 2007 RTM Issues: http://pschmid.net/blog/2006/11/13/80
***
Customize Office 2007: http://pschmid.net/office2007/customize
RibbonCustomizer Add-In: http://pschmid.net/office2007/ribboncustomizer
OneNote 2007: http://pschmid.net/office2007/onenote
***
Subscribe to my Office 2007 blog: http://pschmid.net/blog/feed

"Gerry Hickman" <nospam> wrote in message
news:phx.gbl:
 

Base Config/Patch .MSP for a Terminal Server?

Posted: 17 Apr 2007 01:31 PM PDT

Hi Scott,

There were changes made after Office 2000 and basically, the 'lazy' way to do it would be to install Office 2007 to Terminal Server,
as Office 2007 sort of 'autochooses' feature settings as part of Setup (so do Office XP and Office 2003) based on the installation
in a Terminal Server/thin client environment.


There isn't, at present, that I'm aware of, a listing of which 'OCT' settings switch in that environment though, from the 'desktop'
environment variables.

================
<<"Scott Townsend" <nospam> wrote in message news:com...
I do have the Proper version of MS Office Standard 2007 with the Volume
license keys. With the 2000 version that came with the MST file there were
default settings that were optimal for running on a Termninal Server.
Settings like turning off Menu Animations. Turning off the Help Wizard
animation guy and other things that were there to better run office in a
Terminal Environment.

Okay yeah I'm a bit lazy and wanted to not have to go through all 700
options in the OCT and figure out where to turn off some of this stuff. Was
hoping there was a Base version of a MSP file that was more for a Terminal
Server and then I could add my custom stuff to it.

Thanks,
Scott>>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Auto Profile Create - LDAP Server name?

Posted: 17 Apr 2007 01:23 PM PDT

Hi Scott,

Thanks for sharing me with the detailed information.

Glad to hear you have found the root cause. If you need further assistance,
please let me know.

Have a nice weekend!


Regards,

Leon Hao

Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security
================================================== ==
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ==
This posting is provided "AS IS" with no warranties, and confers no rights.

Previous versions of Office won't uninstall when deploying Office

Posted: 17 Apr 2007 08:26 AM PDT

That is exactly what I am trying to do. It will uninstall if I use the
setup.exe file. It will uninstall if I use a custom .MSP file. Problem is
there is no way to uninstall through Group Policy. Since the software was
originally installed manually there is no upgrade path to remove it via GPO.

I would love to run around my company and uninstall all the clients, but
that would take quite some time. It would be better if there was a automated
way of doing this. Your approach is the ideal method, but not always a
practical one.
--
-Will73


"Gerry Hickman" wrote:
 

App Start Up Issues

Posted: 17 Apr 2007 07:26 AM PDT

does it register itself as a Word add-on. e.g. can you scan from word using
that app?
"Bill Haskell" <com> wrote in message
news:46268e2d$0$9974$com... 

How to convert OneNote from trial using VLK

Posted: 16 Apr 2007 05:18 PM PDT

MSDN started providing some VLKs for their retail subscriptions a short
while ago. At the same time, they switched the media offered on MSDN
from the retail to the VL ones. Retail media (what the trial is) cannot
be activated with VLKs, but VL media can be activated by retail and VL
keys.
VLKs are a popular target for software pirates because they don't
require activation. As MS is making the media for Office 2007 readily
available to everyone via their trial downloads, this restriction helps
fighting the abuse of VLKs.

Patrick Schmid [OneNote MVP]
--------------
http://pschmid.net
***
Outlook 2007 Performance Update: http://pschmid.net/blog/2007/04/13/105
Office 2007 RTM Issues: http://pschmid.net/blog/2006/11/13/80
***
Customize Office 2007: http://pschmid.net/office2007/customize
RibbonCustomizer Add-In: http://pschmid.net/office2007/ribboncustomizer
OneNote 2007: http://pschmid.net/office2007/onenote
***
Subscribe to my Office 2007 blog: http://pschmid.net/blog/feed

"naone" <microsoft.com> wrote in message
news:com:
 

Modifying a custom admin setup

Posted: 16 Apr 2007 05:06 PM PDT

Using Office 2007?

"Scott Townsend" wrote:
 

Remove an Administrative Installation Point?

Posted: 16 Apr 2007 11:34 AM PDT

Hi Gerry,

The Office Admin Point has been replaced, in Office 2007, by the Office Network Installation Point (oNIP). The oNIP is created by
copying one (or more) Office 2007 products into a folder on the server.

The Local Installation Source (LIS) is no longer an optional item. It's a required feature on each box and is not supported as
'relocatable'. Setup is basically accomplished from the LIS. So the LIS can be precached/deployed ahead of time or as part of an
image and setup then runs pretty much 'local'.

http://microsoft.com/office/ork

==============
<<"Gerry Hickman" <nospam> wrote in message news:%phx.gbl...
Hi,

I've you uninstalled all Office 2003 clients that used to point to the
AIP, the re-installed as client only, then you can just delete the AIP.

What I do before deleting an AIP for any software product is run a scan
of all HKCR Classes to see if any of them are pointing to an old AIP.
I've not seen this with Office products, but have seen it with some
non-Microsoft products.

AIP is the superior technology, LIS is a joke. Is it true AIP won't be
available for Office 2007? <<
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office Docs won't open from Explorer

Posted: 14 Apr 2007 01:10 PM PDT

That is the same Office 2007 Diagnostics I've already run. No problems were
found. I don't assume the file associations are correct, but I did not
change them.

Again, on my Win XP Pro machine with Office XP Pro, the file associations
ran correctly. When I installed Office 2007 Pro, it uninstalled Office XP,
prior to installing Office 2007. Perhaps it mangled the file associations.
All I know is that when I click on a file from Windows Explore, the correct
Office Application is started, but it neglects to open the document.

- Michael Faklis


"Tim Feld" <microsoft.com> wrote in message
news:com... 

Microsoft CRM - SDK / ISV problem

Microsoft CRM - SDK / ISV problem

SDK / ISV problem

Posted: 12 Apr 2005 07:56 AM PDT

hmmm,.....yeah a button that refreshes the entire Account form does work,
but thats not something I would want (try explaining all this to a
salesman!!).

-Gary

"Gary" <virtium.com> wrote in message
news:phx.gbl... 

Can you suggest any way to turn off Saving to Excel?

Posted: 12 Apr 2005 06:13 AM PDT

Tell them this......YES you can do this, by removing some hardcode in the
forms, BUT that enters you into the "unsupported customization" arena, where
you're completly on your own. And if you ever upgrade, CRM will likely
break, or worse, if you ever need support and you mention this customization
they will refuse to help you.....

But as Peter mentioned, its a fallacy to think this resolves anything......

-Gary

"Larry" <microsoft.com> wrote in message
news:com... 

CRM and SQL Report Services (SRS)

Posted: 11 Apr 2005 11:40 PM PDT

Hi,

I have managed to do this successfully, but you need to create two web
sites, and distinguish them using host headers and extra DNS entries
(or ports, but host headers and dns entries are so much more
professional). First install CRM on the default web site, and then move
it to a new host header, and create the dns entry. Create a new default
web site and install RS. you can move this to a different host header
as well, but this requires another setting in one of the RS INI files
to be changed, where CRM is pretty happy to be moved around without any
extra settings.

Cheers,

Rex

Missing Product Catalog

Posted: 11 Apr 2005 02:56 PM PDT

I had assigned myself all of the Security Roles.

So, if we have the "Standard" version it is not included?

Also, the Action Pack says it comes with Professional but when I enter my
key it says we have Standard. Do I just need to request a new key?

THanks,

Josh



"Mats" wrote:
 

Appointment Activity,status change automatically

Posted: 11 Apr 2005 02:09 AM PDT

I have found the storedprocedure in my SQL 2000 ("p_ClosePastAppointments").
But , how can I disable it ? I've also checked the stroredprocedure in my
other machine, already has the same storedprocedure. But why the other one
not encounter the same problem ?

Thx,

Arwin

"Graham Sheldon [MSFT]" <Graham Sheldon [MSFT]@discussions.microsoft.com>
wrote in message news:com... 
closes 
to 
you 
their 
date, 
have 
I've 
of 

CRM Self help for dummies, need some general help, yes I'm a noob

Posted: 08 Apr 2005 09:53 AM PDT

You can not change activities forms, such as tasks, in the current version.
Other forms can be changed by going to the Home Page > Settings > System
Customization. Click on the entity you want to change and you will see many
options for customizing forms. After you change a form, you need to go on the
CRM server and open Deployment Manager for CRM. Right click on the top node >
All Tasks > Publish customizations. Then follow the wizard to publish them.
Lastly, you will need to reset IIS for the customizations to show up. You can
do this by going to Start on the CRM server, then click Run... Type cmd and
in the DOS window that opens type iisreset and press enter.

There is much more info on this newsgroup about customizing forms. Good luck.
By the way, if you want the minutes on tasks to show up as hours on your
reports, you can add a formula in Crystal to convert the minutes to hours.

Matt Wittemann
http://icu-mscrm.blogspot.com


"Jeremy" wrote:
 

SQL relationship between Role and User?

Posted: 08 Apr 2005 09:07 AM PDT

Outstanding - don't know how I missed that. Thanks!!
Chris

"TonyL" wrote:
 

Security flaw in access rights?

Posted: 07 Apr 2005 03:29 PM PDT

Sam,

Creating a role with Create/Assign only privelege should solve your
problem. If you
assign this limited role to User1, he will only be able to create
records and not edit
them.

Alex

SFO Offline DB View does not match CRM Server

Posted: 07 Apr 2005 10:57 AM PDT

Does anyone know the solution to this. Right now my solution is to run
the p_GenSpecificViewAndTriggers DB Script on the client, which is not
practical.
The view is actually updated for some entity such as Contact, but not
for SystemUser.

I really need to figure this out.
Thanks!

Deploying Custom forms on SubAccount tabs

Posted: 07 Apr 2005 04:39 AM PDT

Thank you very much Matt.you are giving a lot of support with your fast
responses.
Matt if you donot mind can you clear this also.
Click sales tab--------click Accounts (in sales tab)--------click particular
account(in accounts ,it open popup window for that account, in that)----click
contacts(in this contacts list -I want to put a filter (by using pick list)
in this form)-after select the particular value ,the view filters data).
This is my task.
Pls guide me clearly. Thank you
venkataravikumar


"Matt Parks" wrote:
 
Subscribe to: Posts (Atom)