Pages

Search

Microsoft Word - Content Control - restrict length

Microsoft Word - Content Control - restrict length


Content Control - restrict length

Posted: 02 Apr 2015 02:48 PM PDT

Below code block does not invoke MsgBox if I type more than 10 characters (numbers) - in a .docm with a plain text control. What am I missing or does it not work? I am using Word 2016 preview.

Private Sub Document_ContentControlOnExit(ByVal CC As ContentControl, Cancel As Boolean)
     If LCase(CC.Title) = "pcode" Then
         If (Not CC.ShowingPlaceholderText) And Len(CC.Range.Text) > 10 Then
             MsgBox "Please enter no more than 10 characters", , "postcode error"
             Cancel = True
         End If
     End If
 End Sub

Regards

Libby

Word 2010 docx. document suddenly went corrupt???

Posted: 02 Apr 2015 02:40 PM PDT

I recently tried to open my word document and suddenly started saying file was corrupt and when I tried to repair it said file some parts are missing or invalid. Please this highly important document for work, and I can't believe this happened. Other files I am working on seem to open fine, but this one the most important won't open! All help is greatly appreciated. 

My dropbox link if anyone could take a look. 

https://www.dropbox.com/s/tae1b9htyqx0uxe/Inspection%20Water%20Plant.docx?dl=0

Thank You

Office 2013 Apps start very slowly.

Posted: 02 Apr 2015 01:20 PM PDT

I have tried just about every suggestion by Doug Robbins, but none have helped.  Other applications on the machine start very quickly, even IE11.

Everything is up to date, yet I still have this issue.  When Office was first downloaded and installed, it worked fine.  Then just about 2 weeks ago, it all started up very slowly.  The safe versions start quickly.  Any suggestions?

How do I save as PDF in Word 2013?

Posted: 02 Apr 2015 12:59 PM PDT

Split from this thread.

I intend converting a *.docx or *.doc from Office Word 2013 into PDF format. Please state exact steps from within Word 2013 to do so.

Thanks and best regards,

Mohan

Cannot Move Custom Office Templates folder in Office 2013

Posted: 02 Apr 2015 12:43 PM PDT

I just installed Office 2013 on my Windows 7 ultrabook, and I do not want the Custom Office Templates folder in the My Documents folder.  I found an unclear answer at http://superuser.com/questions/610278/ but I tried that and it did not work.  Could someone please step me through clear directions for how to move the folder?  I like to keep the My Documents folder spare, with only 4 subfolders.  Thanks!


MS Word 2010 editing: black blocks and other distortions

Posted: 02 Apr 2015 11:37 AM PDT

When I edit documents in Word 2010 (regardless of what computer I use), I often see big black rectangles or other distortions blocking the text.  The distortions are purely visual -- they don't affect the content -- and they disappear if I scroll up and down a few pages, but they pop up regularly and are  seriously annoying.  Does anyone know what the problem is and how I can fix it?

I've attached a photo of a typical distortion.

Word 2013 Table of Contents skewing formatting

Posted: 02 Apr 2015 10:16 AM PDT

Most of my TOC formats just fine; however a few items are not placing the page numbers to the far right as they are suppose to. I have checked all formatting and there is no difference between those headings that format correctly and those that do not. Any suggestions to fix this?

IE:

Methodology ............................... xxx

setting xxx

sample ...........................................xxx

The middle example is incorrect. This occurs a few times in my TOC. Please help.

Using check box parameters to link to a bookmark in Word 2010

Posted: 02 Apr 2015 09:06 AM PDT

I would like to use check boxes in a document to link to different bookmarks in a document.

Exemple

****

Female (this will be check box)

Male (this will be check box)

Age

24-40 (this will be a check box)

41-50 (this will be a check box)

if check box Female and 24-40 are selected, this will bring you to a bookmark in the text.

if check box Male and 24-40 are selected, this will bring you to a different bookmark in the text.

if check box Male, female and 24-40 are selected, this will bring you to a third different bookmark in the text.

Etc...

Thank you for your help

Track Changes Doesn't Recognize me As a New Editor

Posted: 02 Apr 2015 08:56 AM PDT

Word 2013.

I was forwarded a document that was created by User 1, then edited by User 2, then edited by User 1.

Both User's additions are showing in Green, and both User's deletions are showing in Red.

Is there a setting to I can see the specific changes that Uswer 2 made?  And then the specific changes that User 1 made?

And, if I may changes, have my edits show in different colors?

word won't open

Posted: 02 Apr 2015 07:12 AM PDT

My Word will not open anymore, its giving me an error message, my docs were automatically converted to Word pad instead of word doc does anyone know how to fix this?

Cursor Not Blinking

Posted: 02 Apr 2015 02:20 AM PDT

I have just started using MS Office 2013 on a new HP laptop and while editing in Word I suddenly lose my blinking cursor insertion point so I cannot see whereabouts in a particular word my cursor is. It works ok in Print layout view but not Draft view, which is what I usually use. I have tried shutting Word down but still the same problem. It happened for a short while yesterday but then started working again and now this morning it isn't working again in any of my documents. I expect there is a setting somewhere that needs turning on or off but haven't a clue what to do. Any ideas how to fix this annoying problem?

There are older posts in the forum about this happening to other people but none of their replies have helped solve it on my laptop or are too old to apply to 8.1 version.

Setting Font Color to No Color

Posted: 01 Apr 2015 10:12 PM PDT

Dear Word experts,

  I format a multilevel list linked with styles. By default I see the following dialog:

As far as I understand, No Color means no special setting, that is a color specified by corresponding style.

However, if I change this setting to something else, I cannot revert it back to No Color (governed by style).

Can you suggest me a way to switch from a custom setting (for example Automatic) back to No Color please?

Thank you for the detailed reply.

Hyperlinks no longer working in Word

Posted: 01 Apr 2015 09:32 PM PDT

I have Windows 8.1 and the software is Office Home and Student 2007. I loaded software onto my new laptop and even though hyperlinks are enabled they are no longer working - they appear as text only.  I've tried to follow advice on numerous message boards to no avail. Called help line and they want $149 just to attempt to help me. Not going to happen. Please help.

Microsoft Word 2013 Will Not Work

Posted: 01 Apr 2015 09:12 PM PDT

Whenever I try to open a document Microsoft Word 2013 just crashes and restarts the program. It works in safe mode, but I do not know A) How to get it into safe mode on my own and B) Safe mode is not meant to be used all the time. I tried turning off the cloud sync, add ons. I tried the troubleshooter and running it in every Windows version and it still does this. I looked online but nothing has helped. I can open blank new documents, but the moment I try to save it Word crashes and restarts with the file unsaved even under "unsaved files".

Groupwise to Excahnge Migration - Microsoft Exchange

Groupwise to Excahnge Migration - Microsoft Exchange


Groupwise to Excahnge Migration

Posted: 27 Feb 2009 08:32 AM PST

Mark A. Dudley <com> wrote: 

Yes, it should be, definitely! But an hour for a mailbox sounds like a lot.
How big is the mailbox? What network speed? etc.

If you want to do this in stages, flip the mail delivery to Exchange, and
have the "unmigrated" users access their Exchange mailboxes via OWA while
keeping GW open for older items. 

You can access GW in Outlook, you know. At least you used to be able to. I
haven't used GW for a while.
 




Outlook Anywhere authentication method automatically changed

Posted: 26 Feb 2009 07:43 PM PST

On Feb 27, 8:05am, chriske911 <chriske911n...@m.yahoo.com> wrote: 


Thanks, but I didn't have any luck. I tried using a GPO to set the
authentication method to Kerberos/NTLM. When that didn't work, I
tried just NTLM. These changes had no effect on the clients.

Slow Proformance

Posted: 26 Feb 2009 10:33 AM PST



"Venger" <com> wrote in message
news:A6_pl.8285$%nbdc.sbc.com...
 

That would depend on the Exchange version. If its 2003, you never want more
than 4 GB. Exchange 2007, that’s a whole 'nuther story.
That’s why Im asking on the Exchange version being used.



what comes with Exchange Server 2007

Posted: 25 Feb 2009 05:38 PM PST

This might help:
http://technet.microsoft.com/en-us/library/cc178996.aspx



"Don Powell" <microsoft.com> wrote in message
news:com... 

iphone not syncing

Posted: 25 Feb 2009 08:46 AM PST

On Wed, 25 Feb 2009 08:46:01 -0800, Frank
<microsoft.com> wrote:

 


First get the device ID for the user:
http://technet.microsoft.com/en-us/library/aa996908.aspx

Then p the IIS logs Export-ACtiveSyncLog and see if it tells you
more info ( focusing on the device ID)

http://technet.microsoft.com/en-us/library/bb123821.aspx

Outlook Web Access - Password issue

Posted: 24 Feb 2009 01:52 PM PST

If it helps figure out a solution, at my own outside desktop, it only seems
to be MS Office attachments. I use Foxit Reader and PDFs open right up in a
new Browser. If I am at a system with just Adobe I am forced to save the
file before opening. For Office (.doc, .xls) I am prompted to Open, Save,
or Cancel, THEN credentials are requested again.

"C. Newell" <net> wrote in message
news:phx.gbl... 


OWA Drafts

Posted: 24 Feb 2009 07:31 AM PST

I created a test mailbox & set the limit to 0 and logged onto it using OWA.
When I create a new message & hit send, I get the popup stating I exceeded my
mailbox limit. At that point, I hit save and it seems to save the message
but I cannot find where it saves to. It's not in my 'Drafts' folder. Where
does it go?
Thanks....

"Ed Crowley [MVP]" wrote:
 

Delivery to the following recipients has been delayed

Posted: 24 Feb 2009 02:14 AM PST

Woody <microsoft.com> wrote: 

So you never get an NDR? What if you use message tracking?
 

What about the static IP & PTR questions?

 

Maybe, but it would be better to find the cause. You might want to crank up
SMTP logging.
 



Failover SCR - ESEUTIL /R /A - how much Time ?

Posted: 24 Feb 2009 12:46 AM PST

Where do you see the requirement to run ESEUTIL?
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

"Exchange2007-Q" <microsoft.com> wrote in message
news:com... 

Brought new Exchange server online and want to retire the primary

Posted: 23 Feb 2009 02:58 PM PST

Actually I should have mentioned on the 2000 to 2003 article, follow it step
by but start at section 2.
From there follow it along!

No, the new server will always be the second server and that is just fine.
Once you are done with all the move processes, then you remove the first
server.
So I would follow the Mchange.org article, then drop back and do the MS
KB to finish things up!

Once you are satisfied everything is working right, shut down the Exchange
services on the old server for a week or two to make sure everything works
before uninstalling Exchange.

"RussellE" <microsoft.com> wrote in message
news:com... 

How do i close an already open port?

Posted: 23 Feb 2009 07:13 AM PST

On Thu, 26 Feb 2009 04:00:08 -0800, Rig
<microsoft.com> wrote:
 


I dont understand why. Do you have the ports hard-coded in a firewall
or something?

Exchange not saving e-mail on server by default.

Posted: 21 Feb 2009 10:20 AM PST

Rob <nospam> wrote: 

Hi - I replied to your identical post in another group, and I believe others
did too. In the future, please don't multipost - if you need to post to
multiple groups, it's best to crosspost instead, by posting a single message
to a handful of relevant groups (separate the NG names with commas) so that
everyone can follow the thread. Multiposting wastes everyone's time,
including yours, and may lead to your actually getting *less* help rather
than more.

See http://www.blakjak.demon.co.uk/mul_crss.htm


SAN Certificate on NLBC CAS Nodes

Posted: 20 Feb 2009 11:59 AM PST

If you didn't get the option to make it exportable, just go back to the
vendor and tell them that you made a mistake in the request process. They
will not penalize you for this. They will let you resubmit the request, as
long as the domain names are the same as in the original request.

Deji

"Syed.Aleem.Uddin" <microsoft.com> wrote in
message news:com... 

Missing emails when using Outlook Web Access

Posted: 20 Feb 2009 09:26 AM PST

Changing the "Deliver new e-mail to the following location:" from the e-mail
accounts setup fixed the problem.
--
Thanks guys,

Rob
"Lanwench [MVP - Exchange]"
<donotsendme.unsolicitedmailatyahoo.com> wrote in message
news:phx.gbl... 


Monitoring Email Stats

Posted: 19 Feb 2009 02:06 AM PST

Hi,

You want to monitor MchangeMTA

Check this link out:
http://computerperformance.co.uk/HealthCheck/Exchange_Health.htm

Oliver


Outlook 07: Rule only working sporadically

Posted: 18 Feb 2009 10:37 PM PST

Boppy <com> wrote: 

That is going to double your mailbox size and still makes no sense to me. I
also do a *lot* of filing of my correspondence. Do you know about "Find
Related Messages" and search folders? When you find what you want, Select
All & right-click Move to Folder. That's how I do it. Works perfectly and I
don't end up with duplicate cr@p all over my mailbox :-)

Regardless, Outlook rules are entirely Outlook things, and there's more
expert help to be had in the OL newsgroup.


Microsoft CRM - Multi-Org Setup

Microsoft CRM - Multi-Org Setup


Multi-Org Setup

Posted: 10 Nov 2005 12:07 PM PST

currently microsoft crm does not support your scenario or at least without
some additional work.

if you deploy a crm solution for each company you will then have to build or
buy a solution that will roll up the data into a single system.


"John B." <microsoft.com> wrote in message
news:com... 


Database size - MSCRM and SFO

Posted: 10 Nov 2005 10:20 AM PST

as i understand it theire is a hard 2gb limit on the msde database

that may have increased to 4gb on the version that comes with crm 3.

"Niths" <microsoft.com> wrote in message
news:com... 


MSCRM and CTI

Posted: 10 Nov 2005 01:49 AM PST

Cheers, John - I'll take a look.

FV

"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 
implement 
call 
not 


Kindly advice

Posted: 09 Nov 2005 11:48 PM PST

Youl could not be entering this field ie Microsoft Dynamics CRM at a better
time. With the imminent release of v3 Microsoft have a powerful platform for
development. The ability to verticalise crm has never been beter than now.
So keep in mind that you will still have a use for your development skills


"Gaurav" <com> wrote in message
news:googlegroups.com... 


cannot access to CRM 3.0 newsgroups

Posted: 09 Nov 2005 07:22 PM PST

Hi
I have read the doc and tried configuring the Outlook express for the
private newsgroup using the account name and password provided. But
outlook just keeps prompting me to enter the password again and again.
kindly help

Exception from HRESULT: 0x80040216 creating quote revisions or invoices

Posted: 09 Nov 2005 01:02 PM PST

Thanks for the answer Matt, but no, none of the line items has a $0.00
price....

Carlos Sanabria

Valid software assurance - for free 3.0 upgrade

Posted: 09 Nov 2005 12:54 PM PST

Specific questions related to CRM v3 should be addressed to the Early Access
newsgroup. For connection details see:

https://microsoft.order-7.com/CRMPartnerBeta/resources/newsgroups.doc

and please do not cross post.

or mail me com

--

All about Microsoft CRM 3.0- read

http://microsoftcrm3.blogspot.com




"Matt Parks" wrote:
 

Clustering

Posted: 09 Nov 2005 11:20 AM PST


Specific questions related to CRM v3 should be addressed to the Early Access
newsgroup. For connection details see:

https://microsoft.order-7.com/CRMPartnerBeta/resources/newsgroups.doc

and please do not cross post.

or mail me com

---

All about Microsoft CRM 3.0- read

http://microsoftcrm3.blogspot.com




"TM" wrote:
 

Emails Not Routed to CRM

Posted: 09 Nov 2005 09:57 AM PST

We have Exchange 2003 (Not Service Packed yet ). I have contected MS
PSS and the next plan is to uninstall and reinstall the Exchange
router. I will send an update if this works, not massively hopeful
though :-((

PDF Attachments

Posted: 09 Nov 2005 07:55 AM PST

that patch was applied to the server, but not the client as this was not
happening through SFO? Should I still apply the client side patch?

"John O'Donnell" wrote:
 

assign lead to previously created opportunity

Posted: 09 Nov 2005 07:29 AM PST

I have not seen any solutions out there so this means you may have to create
custom code. Honestly I have been working with microsoft CRM since before
V1.0 and this is the first time i have heard of this request.

I guess the solution would simply be a tool that scans hyour opportunity
table and sees
"Gavin" <com> wrote in message
news:phx.gbl... 


SBS2003 with 1 network card

Posted: 09 Nov 2005 06:55 AM PST


Thanks for your replies!

We have tried this with and without a cname and with and without a host
(using host headers). It seems as if the cname resolves back to the server
name, which is was doesn't work in the first place. Am I missing something
in how the cname works?

Rob - yes, the computers are on the same domain. I will have a look in the
security log and post any info back.

Mike

"Fan" wrote:
 

Integration CRM & Navision

Posted: 09 Nov 2005 06:22 AM PST

Hi,
Yes i can do this.. with DMF (data migration framework) i can develop
application for you for this. The great plains will be supported with final
release but microsoft should think about navision support as well.

Thanks,

All about Microsoft CRM 3.0- read

http://microsoftcrm3.blogspot.com




"Lidia" wrote:
 

CRM 3.0 Demo box Client fails

Posted: 09 Nov 2005 05:06 AM PST

Specific questions related to CRM v3 should be addressed to the Early Access
newsgroup. For connection details see:

https://microsoft.order-7.com/CRMPartnerBeta/resources/newsgroups.doc


Thanks,

All about Microsoft CRM 3.0- read

http://microsoftcrm3.blogspot.com




"Andreas Donaubauer" wrote:
 

Upgrade from CRM 3.0 beta to Definitive CRM 3.0

Posted: 09 Nov 2005 04:32 AM PST


Specific questions related to CRM v3 should be addressed to the Early Access
newsgroup. For connection details see:

https://microsoft.order-7.com/CRMPartnerBeta/resources/newsgroups.doc

and please do not cross post.

or mail me com


All about Microsoft CRM 3.0- read

http://microsoftcrm3.blogspot.com




"Diogo Monteiro" wrote:
 

Trying to install CRM 3 on Small Business Server 2003

Posted: 09 Nov 2005 04:07 AM PST

SBS by default creates a domain.local internal namespace and only creates a
forward lookup zone in DNS for domain.local. Try opening a command window
and see if you can ping your server.domain.co.uk and see if it returns and
IP address. If not you either need to create a Forward Lookup zone for
domain.co.uk or manually add a record to the LMHosts table to handle the
name resolution.

You should probably follow this up in the early access newsgroup instead of
here.

Bill Walter

"Nigel Goodwin" <Nigel microsoft.com> wrote in message
news:com... 


CRM & IIS configuration during installation of CRM

Posted: 09 Nov 2005 02:46 AM PST

The other setting to look out for is taht CRM disables viewstate which will
affect any ASP.Net controls that you use.

--

Matt Parks
MVP - Microsoft CRM


"Ronald Lemmen" <RonaldL@-REMOVETHIS-avanade.com> wrote in message
news:com...
CRM has its own web.config file. The settings which are in there are
overruled by the web.config settings in your app. If there is nothing about
sessions in your web.config, then these are being disabled by the crm's
config file. (<sessionState mode="Off"/> is one of the lines in crm's
web.config file).

Hope this helps,

Ronald Lemmen
Avanade Netherlands

"Aida" wrote:
 
was 
things 
ever, 
this 
together. 


Great Plains Integration 3.0

Posted: 08 Nov 2005 04:13 PM PST


I am aware of that, however: on one of my previous posts on the 3.0 board
they told me to use the suggestion tool to post suggestions for the next
version of integration... But the suggestion tool does not have a category
for posting 3.0 suggestions... so they show up here.

It's a type of endless loop, you see...

Thank you though, I won't do it again.