Pages

Search

Microsoft Word - how can i get my ms word document titles to accept '!'s and '?'s?

Microsoft Word - how can i get my ms word document titles to accept '!'s and '?'s?

how can i get my ms word document titles to accept '!'s and '?'s?

Posted: 26 May 2014 05:38 PM PDT

it's such a pain to not be able to include a '!' or a '?' in my document titles, since i'm filing thousands of poem and prose titles that include those marks... is there any way to make it work? 

Pages keep flipping and won't scroll any farther

Posted: 26 May 2014 02:31 PM PDT

My word document is about 70 mirrored pages.  When I try to scroll down the document, it jumps to one page and these pages will keep flipping back and forth as I try to scroll passed the page.  I've tried removing all formatting and bookmarks.  Nothing seems to work. 

I'm using Word 13--Windows 8.1

Thank you!

Rebecca

Columns in mid portion of page

Posted: 26 May 2014 01:12 PM PDT

Hello,

What I want to do seems simple enough, but I can't seem to get it working! I did consult the help section of MS word 2010.

I'd like to create a section in the middle of a page for 2 columns. This section would take up about a third of the page, so after creating the column section, entering text into the columns, then I'd like to revert to the original "no columns" format, and complete the page as in a normal document.

Any directions will be appreciated.

Jack

Exporting word 2013 document to pdf causes table formatting error in pdf

Posted: 26 May 2014 12:49 PM PDT

I created a Word document (docx) using the elementary school newsletter template.

The Word document shows the table properly sized while the PDF shows the table running off of the end of the page.

Any ideas or suggestions would be appreciated.

Thanks,

Roseann

Cannot paste images together with text from web browers into offices 2010

Posted: 26 May 2014 10:34 AM PDT

Recently, my offices 2010 has gone strange. I tested with 3 web browsers, firefox and chrome (both were latest version updated regularly), and internet explorer pre-installed in my window 8. When i tried to copy (Ctrl +C) and paste (Ctrl+V) the contents consisting of text and images on many websites which opened by these web browsers, there were only text lines pasted successfully. The images could not be pasted in word, powerpoint and onenote. After pasting, all images only appeared as an empty rectangular or square, or appeared as an image showing two mountains and a sun. I have tried many solutions i found on internet to solve this problem, however nothing has worked. Please help me!

Style/paragraph definition that prevents isolated lines of text

Posted: 26 May 2014 09:33 AM PDT

I know that the "Keep with next" checkbox under a style's Pragraph settings can be used to prevent a single line of text to follow the title (heading), at the end of a page, thus inserting an automatic page break *before* the title, in order for it to start with plenty of space afterwards.

But is it possible to do anything so that the converse is also prevented, i.e. not having a single row at the start of a page, before a new heading begins?

What does the small square format symbol mean?

Posted: 26 May 2014 09:21 AM PDT

In WORD 2013 I have occasionally, small black squares which appear at the beginning of some paragraph headers and occasionally at the beginning of some regular text lines.  They are visible only when displaying all format symbols (Shift-Ctl-8).   What do they mean?  How do I get rid of them?

Mutiple asterics cause line of undeleteable little squares??

Posted: 26 May 2014 09:02 AM PDT

When typing a story I type 5 Asterisk and a carriage return for a scene change it sometime causes a line of little squares that I can't get rid of, what is the problem and how do I get rid of this line. It seem unreachable? I think Ctrl 'q' used to erase it now with Office 13 an Windows 8.1 nothing seems to rid this line??

 

"Ghost Document" Shows up When I Open Word

Posted: 26 May 2014 08:45 AM PDT

This strange document opens the same time I open any one of my word documents. When I try to click on it to open it and see what it is, it just says it is a corrupt file that cannot be opened. This only appears when I have the document sitting on my desktop and I open it from there. If you have any questions about the situation to get more clarification, please do ask

Is there any way I can keep this from happening?

Is there something wrong with my Microsoft Office - Word?

Font embedding issue

Posted: 26 May 2014 07:21 AM PDT

I've downloaded a font which I want to embed in a word document. The font's embedding right is "editable". Both right click on the font file->properties->details and the value returned by GlyphTypeface.EmbeddingRights say so, but word wouldn't embed it. I wrote a small app, which embeds the font in an existing document, but when I open the document in Word, it says:

READ-ONLY  To modify this document, remove fonts licensed for Print or Preview only. [Button="Remove Restricted Fonts"]

(The word web app accepts it just fine though)

I suspect, that Word still uses GDI functions like GetOutlineTextMetrics behind the scenes. I noticed that this function returns "wrong" information. The otmfsType-field of theOUTLINETEXTMEXTRIC-struct for this font is 12 (binary: 1100). The doc for this field says:

otmfsType

Indicates whether the font is licensed. Licensed fonts must not be modified or exchanged. If bit 1 is set, the font may not be embedded in a document. If bit 1 is clear, the font can be embedded. If bit 2 is set, the embedding is read-only.

Also, Control Panel->Fonts returns 2 values for the embedding restrictions:


Any Idea how to work around this issue?

Table limits in Word 2013

Posted: 26 May 2014 06:55 AM PDT

I have recently converted from Windows XP & Word 2007 to Windows 8 and Word 2013.

 

I am having problems with a file that I use as a bibliographic database.  It has a large table (387KB 77 pages 400 rows in one table).  With Word 2007 I could search within this table then goto the found results, I could also sort the whole table. 

 

In Word 2013 when I sort I loose the bottom half of the table - just a blank screen.

When I search for text a list of results appears but I cannot go to some of the results that were found - nothing happens, no error message or anything. 

 

I assume I have exceeded a limit for something but everything in the file is well within the limits listed in http://support.microsoft.com/kb/211489/en-us, 

However, that document does not list any limits for tables.

 

Smaller tables in other files work as I expected.

What are the limits that apply to tables?  Are there any ways to avoid these problems other than splitting the file up (or buying decent software).

 

Thanks John Fisher  

 

 

Can't get MS Office 2007 working

Posted: 26 May 2014 04:36 AM PDT

I recently installed Microsoft Office 2007 onto my laptop (running Windows 8.1), but I forgot to uninstall my previous version (MS Office 2003). Now I can't get any of my documents to open with the 2007 version. Whenever I try to set the default program to a 2007 version it just says:

The 2003 version of Office still works fine, but I really don't want to have wasted my money on a product if I can't get it to work. 

Any help would be greatly appreciated!

Word viewer shows blank

Posted: 26 May 2014 02:47 AM PDT

After sending a Word document as an attachment to email when I click on the

attachment it it opens in a Word Viewer frame, but the screen remains blank.

Why isn't the document content showing?

Office 2013 Word and Excel does not open at all and keep coming up with same error message

Posted: 26 May 2014 02:14 AM PDT

I just bought Office 2013 and installed in my laptop which is running on Windows 7 OS.

However, after installation, both Word and Excel does not open any documents and keep coming up with the following error message saying "...notify you if a solution is available...". This is very poor message. What if there is no solution? Do I lose my money buying Office 2013??????

Please let me know whether there is a solution.

Thank you

Microsoft Word 2010

Posted: 25 May 2014 08:57 PM PDT

I have Microsoft Office Word 2010 on Windows 7 for more than 2 years.Today when I tried to use it. I have this message.Location is not available.Q:/ is not accessible.Access is denied.

Microsoft office not working

Posted: 25 May 2014 04:49 PM PDT

I Uninstalled Norton Antivirus this morning because I was tired of the popups. Now my Microsoft office is not working.  When I click on Word for example, it changes from blue to white (like there is a flashbulb below the Word icon) then goes right back to blue and nothing happens. I restarted the computer twice and am assuming it has something to do with the Norton uninstall, but not sure what to do. Any suggestions?

Exchange 2003 in Trusted Forest - Microsoft Exchange

Exchange 2003 in Trusted Forest - Microsoft Exchange

Exchange 2003 in Trusted Forest

Posted: 01 Nov 2006 12:47 PM PST

That is correct. I was hoping that we would be able to see each others
Global Address Books too. We are in the process of merging two organizations
and we are both using Exchange 2003 in a Windows 2003 environment as I
indicated. We do want to have each of us see the public folders and the
busy/free, but I was also hoping for the Global Address Books. Thanks

"Ed Crowley [MVP]" wrote:
 

Email attachments arrive with 0K and empty at external addresses

Posted: 01 Nov 2006 07:53 AM PST

Apologies for the lack of information. The details of our outgoing gateways
are:

Exchange 2003 SP2
Symantec Mail security for Exchange ver 4.6
MS Exchange IMF v2
mxClaim v3.1 (Discalimer add-on)

Sending an email via a different gateway that doesn't have the IMF or
mxclaim on works ok. Contacted producers of mxclaim and they could not
reproduce problem. Only affects certain files and often resaving the file
allows the file to be sent.

I posted on the off chance that someone might had a similar problem

TIA

"Ed Crowley [MVP]" wrote:
 

buku ndr's and failure notices

Posted: 31 Oct 2006 07:24 PM PST

By the way, this KB helped me out a bunch for cleaning out the muck in my
queues.
Until this was done my server was way out of whack.
http://support.microsoft.com/default.aspx/kb/909005


"John Oliver, Jr. [MVP]" wrote:
 

OWA Access for 2 Servers - Same Org - Different MX?

Posted: 31 Oct 2006 01:05 PM PST

Hi Ed,

I really appreciate your time.
Ultimately, I will have migrated all mailboxes to the new Enterprise 2003
Server. The users I have migrated do not use OWA which leaves about 60 users
/ mailboxes that need it. the exisiting environment has an MX pointing to a
3rd party Anti Spam solution (hosted) - the new Server has an Appliance
in-house I'll manage. I tought if I could get another URL / OWA address to
the new server, the migration would be less painful for the users.

Again, thanks for your insight!

"Ed Crowley [MVP]" wrote:
 

How do I find...

Posted: 31 Oct 2006 10:48 AM PST

Hi

You can use "Active Directory Users and Computers" console, right click on
your domain and click Find.

On the section Find choose Custom Search, and on the Advanced tab paste this
LDAP query:



(&(objectcategory=person)(objectclass=user)(userAc countControl:1.2.840.113556.1.4.803:=2)(msExchHome ServerName=*))



In the Search results select all users and in the right click choose
Exchange task and Delete mailbox.



I hope this will help

Nebojsa Seslija

"Franky M." <microsoft.com> wrote in message
news:com... 

How to tell exchange he is no longer responsible for a domain

Posted: 31 Oct 2006 10:40 AM PST

That did the trick. Thanks.

"Leif Pedersen [MVP]" wrote:
 

Auto message to new or Moved users?

Posted: 31 Oct 2006 06:54 AM PST

In brief, the best way to do it would be to have a provisioning script you
always use to create accounts and add code to send that message to the
process.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Transam388" <microsoft.com> wrote in message
news:com... 

501 Sender IP must resolve

Posted: 30 Oct 2006 07:41 PM PST

Very cool.
Good luck!

<com> wrote in message
news:googlegroups.com... 

Modifying Contact Views on the Exchange Server

Posted: 30 Oct 2006 11:07 AM PST

Ed,

Thank you very much. After some more research looking for the CIW on the MS
website I discovered that the CIW is for installations but another tool
called Custom Maintenance Wizard should allow me to change settings after the
product is already installed and I'm downloading and looking into it right
now.

Thanks again, this seems to be just what I was looking for!!

Jon

forwarding external email addresses to Microsoft exchange email address

Posted: 30 Oct 2006 05:50 AM PST

Ian,

If com is your catch-all mailbox it means the email address that
the sending server is forwarding to doesn't exist. Have them double-check
the address they're forwarding to, or have them forward the NDR to you to
troubleshoot further.
--
Bharat Suneja
MVP - Exchange
www.zenprise.com
NEW blog location:
www.exchangepedia.com/blog
----------------------------------------------


"Ian Burton" <com> wrote in message
news:%23LuQiVn$phx.gbl... 

Default Global Address List is missing from All Global Address Lis

Posted: 30 Oct 2006 03:10 AM PST

Hi Leif,

I have found the Default Global Address List in adsiedit under CN=All Global
Address Lists, but unfortunately it won't open up the properties of the
Default Global Address List (nothing happens when you attempt to do so). It
also has nothing under the "Class" heading.

Do you have any suggestions?

Regards
Paul

"Leif Pedersen [MVP]" wrote:
 

OWA and SSL

Posted: 29 Oct 2006 04:05 PM PST

Thx for the info, but I figured it out. There are a few things that you have
to do with the CA once it's created that did not appear anywhere in all the
howto's that I checked. For anyone's future reference, you end up going to
the /certserv site 3 times by the time that it's done.

"mitch Roberson" wrote:
 

Urgent !! please help Exchnage 2003 , AD and DNS problem

Posted: 29 Oct 2006 04:00 PM PST

Hello Mitch

I checked the Directory Access tab the Automaticlly discover is already
enabled, all the GC are listed there. on our Exchnage server I have checked
our Exchnage server listed 3 DNS Server.

it starting to make me think it may be to do with ESX vmware Server. I don't
like the idea of having a FSMO DC and a exchnage in one server using vmware.

Thank you for all your help.


"mitch Roberson" wrote:
 

OWA-The Local Security Authority cannot be contacted

Posted: 28 Oct 2006 06:40 AM PDT

From: =?Utf-8?B?TGVl?= <nospam>
Subject: OWA-The Local Security Authority cannot be contacted
Date: Sat, 28 Oct 2006 06:40:02 -0700
Newsgroups: microsoft.public.exchange.misc


Hello.
The issue I am having is with OWA. When a user logs on sometimes they get
in
w/o a prob and sometimes they get the message "The Local Security Authority
cannot be contacted"



Hi,

Thank you for posting here.

From your post, I understand users get "The Local Security Authority cannot
be contacted" error message when accessing OWA.

First, in order to get a clear picture on this issue, please let me know
the following questions:

1. Does this issue occur on all users?

2. Does this issue occur in LAN? If you access the problematic account from
Exchange Server, do you get the same result?

3. Has this ever worked before?

4. When did this problem begin?

5. Do you use http or https to access OWA?

To isolate this issue, let's try the following steps to narrow down this
issue:

1. Please create a new account, can you access OWA from internal network?

2. If you enable SSL on Exchange Server to access OWA, please temporary
offload SSL and try it again.

3. If you access OWA from a non-domain workstation, can you login?

4. If this issue persists, I would like to check Log on locally rights and
compared SMTP address in Recipient Policy and Exchange virtual directory.
Check Log on Locally:
================
1. Open GPEDIT.msc on the Exchange server.
2. Browse to Computer Configuration->Windows Settings->Security
settings->Local Policies->User right assignment.
3. In the "Allow log on locally", make sure that these users or their
groups are included in the list.
4. After that, you may run "gpupdate /force" on the server and test this
issue. If this issue persists, restart the Exchange server to test this
issue again.


Compare SMTP addresses:
====================
- Recipient Policy for SMTP address:
-----------------------------------
1). Open Exchange system manager.
2). Locate Recipient Policies.
3). Right-click Default Recipient Policy and then click Properties.
4). Click the E-mail Addresses tab.
5). Check the SMTP line (which has been set as primary) and note down the
Address.

- Exchange virtual directory:
----------------------------
1). Open Exchange system manager.
2). Locate Exchange virtual server in HTTP protocol.
3). Right-click Exchange virtual directory under Exchange virtual server
and then click Properties.
4). On the General tab, check if the Exchange path is same with the SMTP
address you just noted down.

Please let me know the result at your earliest convenience, if anything
unclear please feel free to let me know.

Have a nice day!

Best Regards,

Chace Zhang (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

================================================== ===
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

================================================== ===

This posting is provided "AS IS" with no warranties, and confers no rights.


--------------------
| Thread-Topic: OWA-The Local Security Authority cannot be contacted
| thread-index: Acb6lpGb/BmoliWORYGBEzlg4rAgtQ==
| X-WBNR-Posting-Host: 67.80.27.150
| From: =?Utf-8?B?TGVl?= <nospam>
| Subject: OWA-The Local Security Authority cannot be contacted
| Date: Sat, 28 Oct 2006 06:40:02 -0700
| Lines: 10
| Message-ID: <com>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
| Newsgroups: microsoft.public.exchange.misc
| Path: TK2MSFTNGXA01.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.exchange.misc:130979
| NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
| X-Tomcat-NG: microsoft.public.exchange.misc
|
|
| Hello.
| The issue I am having is with OWA. When a user logs on sometimes they get
in
| w/o a prob and sometimes they get the message "The Local Security
Authority
| cannot be contacted"
|
|
|
| --
| Lee Morgenstein
|

Dead Word - Microsoft Office forums

Dead Word - Microsoft Office forums

Dead Word

Posted: 06 Dec 2006 04:17 PM PST

See http://word.mvps.org/FAQs/AppErrors/ProbsOpeningWord.htm .

Yidaho wrote:
 

"Earning-" a free full version of Vista + Office2007 outside the U

Posted: 06 Dec 2006 01:53 PM PST

You'd be better off finding a somewhat local branch of Microsoft and asking
them. We're just a bunch of non-MS employees.

--

JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375




"flybye88" <microsoft.com> wrote in message
news:com... 

Office 2007 OCT .MSP not applying

Posted: 05 Dec 2006 03:50 PM PST

Hi Bob,
Thanks for the reply. I will have to look further into the config.xml
file. I dont mind having to configure this file but how would i apply all my
customisations to the install ie all the things that are in the MSP? Would i
need to do it through the GPO adm's for O2K7??

Rob



"Bob Buckland ?:-)" wrote:
 

Office 2007 Professional Trial Doesn't Include Outlook?

Posted: 04 Dec 2006 10:23 PM PST

Settings will migrate over. You need to uninstall Outlook 2003. It has
always been the case that there can only be one copy of Outlook on a
computer.

Patrick Schmid [OneNote MVP]
--------------
http://pschmid.net
***
Office 2007 RTM Issues: http://pschmid.net/blog/2006/11/13/80
Office 2007 Beta 2 Technical Refresh (B2TR):
http://pschmid.net/blog/2006/09/18/43
***
Customize Office 2007: http://pschmid.net/office2007/customize
RibbonCustomizer Add-In: http://pschmid.net/office2007/ribboncustomizer
OneNote 2007: http://pschmid.net/office2007/onenote
***
Subscribe to my Office 2007 blog: http://pschmid.net/blog/feed

"Pezius" <microsoft.com> wrote in message
news:com:
 

Deactivating from a laptop to put on a different laptop

Posted: 04 Dec 2006 05:11 PM PST

thank you very much for your time.

"JoAnn Paules [MVP]" wrote:
 

Installing MS Office 2007 Professional Plus

Posted: 03 Dec 2006 04:54 PM PST

I had the same problem when installing Office 2007
Enterprise. I edited the registry: --- it didn't help. The
website mentioned in another reply didn't help. The only
thing that helped was to uninstall MS Office 2003 then doing
a search of "C:\documents and folders" and deleting
everything "Office" I felt I could do without. It installed
fine after that.

"Setup error(s) Office 2007 Professional" <Setup error(s)
Office 2007 microsoft.com> wrote in
message
news:com... 

Uninstall of BTR not possible

Posted: 03 Dec 2006 11:10 AM PST

Thanks, your hint (finally the article from MS-knowledgebase) solved my
problems

Heimo

"Patrick Schmid [MVP]" wrote:
 

Re-installing Outlook

Posted: 03 Dec 2006 09:39 AM PST

your welcome

"KARIN" <microsoft.com> wrote in message
news:com... 
ready 
have 
I 
it 
cd. 

Installed on First Use: network installation point vs. LIS

Posted: 02 Dec 2006 01:19 PM PST

Hi Bob,

Thanks for your prompt answer!
 
This is the missing piece of the puzzle I was looking for. I did check the
2007 resource kit, but couldn't find this particular information. In fact,
the OCT's help and 2007 resource kit share a lot of entries.

Thanks again for your input.

--
Vadim Sterkin aka Vadikan
MVP Windows/Shell
http://unattended.oszone.net

Graphics files

Posted: 02 Dec 2006 09:29 AM PST

Thanks
"Bob Buckland ?:-)" <75214.226(At Beautiful Downtown)compuserve.com> wrote
in message news:%phx.gbl... 

Office 2003 reinstalled now Access won't run

Posted: 01 Dec 2006 04:00 PM PST


NO THERE IS ONE FOR .NET V1.1
I WORKED ON IT LAST NITE BUT COULDNT GET ON E OF THE ITEMS TO DL FROM
MS

ILL LET BYOU KNOW WHAT I FOUND OUT

i HAD ALREADY UPDATED TO IE7 W/NO PROBLEMS IT WAS ONLY AFTER THE .NET
UPDATE THAT THINGS STARTED TO GO BAD


--
bigdarts
------------------------------------------------------------------------
bigdarts's Profile: http://forums.techarena.in/member.php?userid=19709
View this thread: http://forums.techarena.in/showthread.php?t=635145

http://forums.techarena.in

Microsoft Office Customization Tool error message: Failed to get available product info

Posted: 30 Nov 2006 08:59 AM PST

Trial and error leads me to believe the problem is in one of two areas:

1. Either Office 2007 will not tolerate some of the subdirectories I'm
making under the network installation point (Addins, Docs, eLearning,
LanguagePacks). -or-

2. Something (an installation from this point?) is leaving a files12.cat
in the Catalog subdirectory that Office Setup does not like.

Because I keep "corrupting" the network installation point simply by
using it! But after I move some files and directories around, it works
again, without going back to the original DVD or .IMG.

Does this sound familiar to anyone? Any ideas? Sande

 

--
Sande Nissen
PC Systems Administrator
Carleton College
Northfield, MN

Installing Ubuntu on Mandriva - Forums Linux

Installing Ubuntu on Mandriva - Forums Linux

Installing Ubuntu on Mandriva

Posted: 27 Apr 2006 06:20 AM PDT

Thanks a lot for your answer. Gave me enough courage to go ahead and do
it :-), now that I know what to look for.
Thanks,
Deepesh

configuration of display through command line?!?!

Posted: 26 Apr 2006 09:13 PM PDT

NUPUL wrote: 

vi /etc/X11/XF86Config-4 ....?

CC

Which type of ISO download to get?

Posted: 26 Apr 2006 11:45 AM PDT

Dave wrote: 
 

Did not mean to sound condescending. Apologies.

Generally you want the source files as last hope back up OR you have special
patches for them you want to compile into them. The is mostly for installations
with a large number of users and specialized applications. You can usually get a
5-10% execution speed increase by compiling it on the machine it runs on so a
program has to use up a lot of time you are paying for to make that worthwhile,
say a database program with a lot of users so the time saved will add up even if
only one second per search. I am sure there are other reasons.

If you knew about those reasons you wouldn't be asking the question. I have
been through five releases of RH/FC and used one source file once -- which
didn't help. I don't bother downloading them at all rather rely upon what is on
sourceforge and such for the latest and the occasional legacy version.
 

Don't know SUSE but for FC I went to the KDE configuration panel to look around
and when I clicked on wireless I was told it was not configured, which is good
because I have no wireless devices. But it offered to configure it for me.
Always take all the help you can get.
 
 
 
 
 
 

--
The purpose of bombing is to strength the government of the country being
attacked.
-- The Iron Webmaster, 3622
nizkor http://www.giwersworld.org/nizkook/nizkook.phtml
Iraqi democracy http://www.giwersworld.org/911/armless.phtml a3

booting problems

Posted: 26 Apr 2006 06:10 AM PDT

during the installation in bootloader configurations it showed hda1 and
fedora 4 and want me to choose the default partition i selected hda1
which is i assume windows and by the way
my first hard disk is IDE AND SECOND ONE IS SATA I INSTALLED FEDORA ON
SATA
DISK PARTITION creating the swap an installation partition i bought it
afetr my first hdd becomefull

in think you are correct but grub is showing only d partiton in the
bootconfiguration menu during installation how can i direct grub
towards c partition how can edit bootconfiguration
Edit/Delete Message

DVD playing on FC5

Posted: 25 Apr 2006 05:01 PM PDT

"Nico Kadel-Garcia" <net> writes:
 
 

There is no legal opensource player. Windows has a number of for pay closed
source viewers. There may even be some for Linux.

 

And libdvdcss is available from sites around the world (except in the USA).

 

Can Kubuntu Dapper/Mandriva 2006 sharea common /home partition?

Posted: 25 Apr 2006 08:32 AM PDT

Michael Badt wrote: 

It is possible to share, using KDE configs between two versions is a
MAYBE, and back it up before you try.

If it doesn't work, have separate copies, use bashrc to create a
symbolic to the "right" one, hard link files like the address book if
(only if) the format didn't change.

Make backups before trying!

--
bill davidsen
SBC/Prodigy Yorktown Heights NY data center
http://newsgroups.news.prodigy.com

networking problem

Posted: 25 Apr 2006 07:03 AM PDT

Beef wrote: 
 
I assume this was a typo (192.168.0.1?) 

Do you get "Destination Host Unreachable" errors, or do the PINGs just
vanish? 
[Routing tables look OK.]

A couple of thoughts:
- temporarily turn all firewalling off (if you are feeling paranoid,
disconnect from the outside world first).
- make sure neither machine is filtering PINGs
- run "tcpdump -n" or ethereal at both ends and look for ARP traffic
- borrow a hub, connect both machines and the firewall to the hub, and
see if the problem goes away. [I know this sounds weird, but I've seen
hardware SNAFUs where this made a difference.]
- use a crossover cable instead of a hub. (Regular cable if one or both
NICs can autosense)

configuring sendmail to accept verification for other server

Posted: 24 Apr 2006 07:44 PM PDT


Bill Davidsen wrote: 

Odd. I:
[root@webserve mail]# hostname -s
hostname: Unknown host
When I made the hostname changes I just restarted the service: network.
Thought that'd be enough. Guess not.
I reboot the machine, and now all the logs refer to itself as
"webserve" instead of "fileserve". So, guess that's fine now. =) Thanks
for the advice!
But I still get "hostname: Unknown host" when I hostname -s.
 

Well, on the local machine I made sure to add the following to the MC:
define(`SMART_HOST',`smtp.domainname.com')dnl
MASQUERADE_AS(`domainname.com')dnl

and rebuilt sendmail.cf

On the remote server I have in:
/etc/mail/access
Y.domainname.com RELAY
local-IP-address RELAY

and /etc/mail/relay-domains
Y.domainname.com
local-IP-address

All that sounds like it should be enough... in fact! on the local
server in /var/log/maillog I don't get the errors anymore, I get:

Apr 27 15:41:51 webserve sendmail[2427]: k3RKfpWa002427: from=liam,
size=53, class=0, nrcpts=1,
msgid=<domainname.com>,
relay=liam@localhost
Apr 27 15:41:51 webserve sendmail[2428]: k3RKfpRB002428:
from=<domainname.com>, size=383, class=0, nrcpts=1,
msgid=<domainname.com>,
proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
Apr 27 15:41:51 webserve sendmail[2427]: k3RKfpWa002427:
to=com, ctladdr=liam (500/500), delay=00:00:00,
xdelay=00:00:00, mailer=relay, pri=30053, relay=[127.0.0.1]
[127.0.0.1], dsn=2.0.0, stat=Sent (k3RKfpRB002428 Message accepted for
delivery)
Apr 27 15:41:52 webserve sendmail[2430]: k3RKfpRB002428:
to=<com>, ctladdr=<domainname.com>
(500/500), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=120383,
relay=smtp.domainname.com [72.3.xx.xx], dsn=2.0.0, stat=Sent
(k3RKfjXk013713 Message accepted for delivery)

Which seems OK, until I get the email back saying:

The original message was received at Thu, 27 Apr 2006 15:41:46 -0500
from webserve [64.19.xx.xx]

----- The following addresses had permanent fatal errors -----
<com>
(reason: 550-Verification failed for
<domainname.com>)

----- Transcript of session follows -----
.... while talking to celticbear.com.: 
<<< 550-Verification failed for <domainname.com>
<<< 550-unrouteable mail domain "webserve.domainname.com"
<<< 550 Sender verify failed
550 5.1.1 <com>... User unknown
<<< 503 valid RCPT command must precede DATA


*sigh*
Well, I appreciate the feedback and assistance. =)
Thanks!
Liam
 

RedHat Linux 7.3 Question

Posted: 24 Apr 2006 05:56 PM PDT

Bill Davidsen <prodigy.com> writes:
 

That is not the problem. Millions still user Windows 95.
The problem is that the security updates have never been applied and do not
exist. Ie, that machine is wide open to attacks.
So my conclusion is the same-- get a newer version!

 

Problems reinstalling grub/lilo (they always hang at boot time ...)

Posted: 24 Apr 2006 03:42 PM PDT

On Fri, 28 Apr 2006 22:35:24 +0200, Olaf wrote:
 
<snip> 
I'm glad you were able to track it down.

[OT] My daughter's boyfriend wasn't as lucky when his laptop suddenly
refused to boot last Sunday. I hope I am making progress telling
people that XP is not the only game in town. He might have been able to
use an XP setup CD in rescue mode like you did, except for the fact his
system was sold without one. The setup files were on the harddisk itself
only. He also had a restore CD, which could be used as the method of
last resort, to reset the system with the initial ghost image. He was
able to use Slax to get his files for school before sending it back for
repair under warranty. It's not unusual for GNU/Linux to come in and save
the day when pursuing viruses/rootkits/etc. Final word: make backups.
ntfsclone is a very good tool.


--
Douglas Mayne

Apache->PHP-mail()->sendmail problem Debian 3.1

Posted: 24 Apr 2006 02:39 PM PDT


Hi!

I doing some progress here.
Now it is 'only' PHP-mail() that dont talk to sendmail as it shuld do.

My /etc/mail/sendmail.mc
[...]
define(`_USE_ETC_MAIL_')dnl
include(`/usr/share/sendmail/cf/m4/cf.m4')dnl
VERSIONID(`$Id: sendmail.mc, v 8.13.4-3sarge1 2006-03-22 22:41:17 cowboy Exp
$')
OSTYPE(`debian')dnl
DOMAIN(`debian-mta')dnl
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
undefine(`confHOST_STATUS_DIRECTORY')dnl #DAEMON_HOSTSTATS=
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
dnl #
dnl # General defines
dnl #
define(`SMART_HOST',`mail.smarthost.se') dnl
dnl #
dnl # SAFE_FILE_ENV: [undefined] If set, sendmail will do a chroot()
dnl # into this directory before writing files.
dnl # If *all* your user accounts are under /home then use that
dnl # instead - it will prevent any writes outside of /home !
dnl # define(`confSAFE_FILE_ENV', `')dnl
dnl #
dnl # Daemon options - restrict to servicing LOCALHOST ONLY !!!
dnl # Remove `, Addr=' clauses to receive from any interface
dnl # If you want to support IPv6, switch the commented/uncommentd lines
FEATURE(`no_default_msa')dnl
DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp')dnl
dnl # DAEMON_OPTIONS(`Family=inet, Name=MTA-v4-1, Port=smtp,
Addr=mail.mylosal.dom')dnl
DAEMON_OPTIONS(`Family=inet, Name=MSP-v4, Port=submission')dnl

I want one interface collect mail from my '*.mylocal.dom' !

dnl #
dnl # Be somewhat anal in what we allow
define(`confPRIVACY_FLAGS',dnl
`needmailhelo,needexpnhelo,needvrfyhelo,restrictqr un,'dnl
'restrictexpand,nobodyreturn,authwarnings')dnl
dnl #
dnl # Define connection throttling and window length
define(`confCONNECTION_RATE_THROTTLE', `15')dnl
define(`confCONNECTION_RATE_WINDOW_SIZE',`10m')dnl
dnl #
dnl # Features
dnl #
dnl # The access db is the basis for most of sendmail's checking
FEATURE(`access_db', , `skip')dnl
snl #
dnl # The greet_pause feature stops some automail bots - but check the
dnl # provided access db for details on excluding localhosts...
FEATURE(`greet_pause', `1000')dnl 1 seconds
dnl #
dnl # Delay_checks allows sender<->recipient checking
FEATURE(`delay_checks', `friend', `n')dnl
dnl #
dnl # If we get too many bad recipients, slow things down...
define(`confBAD_RCPT_THROTTLE',`3')dnl
dnl #
dnl # Stop connections that overflow our concurrent and time connection
dnl # rates
FEATURE(`conncontrol', `nodelay', `terminate')dnl
FEATURE(`ratecontrol', `nodelay', `terminate')dnl
dnl #
dnl # If you're on a dialup link, you should enable this - so sendmail
dnl # will not bring up the link (it will queue mail for later)
dnl define(`confCON_EXPENSIVE',`True')dnl
dnl #
FEATURE(`accept_unresolvable_domains')dnl
dnl #
dnl # Masquerading options
FEATURE(`always_add_domain')dnl
MASQUERADE_AS(`localhost.localdomain')dnl
FEATURE(`allmasquerade')dnl
FEATURE(`masquerade_envelope')dnl
dnl #
dnl # Default Mailer setup
MAILER_DEFINITIONS
MAILER(`local')dnl
MAILER(`smtp')dnl
[eof]

Did I forgot something for my local Apache ( www-data ) to acess sendmail ?
Or PHP mail() funtion.

--
73 dé SM7JQB

Partition sizes?

Posted: 24 Apr 2006 01:55 PM PDT

I ended up putting /boot and swap on the 9GB (sda) and everything else
is / on the 36GB. The rest of the 9 is free so I can move stuff around
later if needed but this way I can learn how much space /var, /usr, etc
will be taking up without running the risk of partitioning something
too small.

Microsoft CRM - Spell check for CRM Activities

Microsoft CRM - Spell check for CRM Activities

Spell check for CRM Activities

Posted: 24 Jan 2005 04:45 AM PST

Try c360 - I think they have one

www.c360.com


"roig" <cydoor.com> wrote in message
news:talkaboutsoftware.com... 

CRM and SBF (8.0) Integration???

Posted: 22 Jan 2005 02:35 PM PST

Will be using SQL 2000

"Curt Spanburgh" wrote:
 

Why does IE shut down when I try and access CRM?

Posted: 21 Jan 2005 03:47 PM PST

Thanks, Matt. I have Google for a pop-up blocker. I had told it to
allow pop-ups from the CRM but that didn't work. I disabled it and it
works. I guess I will have to see what's up with google but for now
it works. Thanks for your help.
"Matt Parks" <com> wrote in message
news:com...
| Disable any popup blockers you may have or configure them to allow
popups from
| the CRM server.
|
| Matt Parks
| MVP - Microsoft CRM
|
| ----------------------------------------
| ----------------------------------------
| On Fri, 21 Jan 2005 23:47:26 GMT, "Who Cares!"
<org> wrote:
|
| We have CRM set up on our servers in the office. When I attempt to
| access it via the net from home it shuts down IE after I put in the
| user name/password. No error messages, nothing. I have put the
| address in my Trusted Sites. Our IT guy can access fine from off
| site. I am using Windows 98 SE and IE 6.0 SP2. Help?
|
| Dave
|
|

Default View in accounts

Posted: 21 Jan 2005 07:43 AM PST

You can create new views that have custom filters.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 21 Jan 2005 07:43:21 -0800, "Simon" <com> wrote:

Hi,

Is there any way you can sort accounts by their
relationship type so you only see certain ones when you
look in the accounts. If i wanted to seperate customers
from suppliers and create 2 selections in the account view
i see the same data on both pages. how can i change this
so i only see the accounts that apply to the view?

thanks

simon

Workflow error - no attribute

Posted: 21 Jan 2005 04:05 AM PST

Try stopping/starting the Workflow Service. It may be working with a cahced
version of the metadata.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 21 Jan 2005 04:05:03 -0800, "Datapac"
<microsoft.com> wrote:

I've added a new field to the Contact form, LFM_Mailer. I've created a
Workflow Manual Rule that is set to update this attribute. When I apply the
rule to a Contact or list of Contacts I get a "No Attribute" error.

I've published and run iisreset.

I've checked the Workflow Monitor and it shows the following detail for the
error:
The specified attribute does not exist on this entity
The attribute CFBLFM_Mailer is not an attribute of the entity "Contact"

This doesn't make sense as I can see the attribute in Schema manager and I
can add it to the Contact form. If I change the workflow to update some
standard fields it works fine.

Any ideas?

SFO Accounts offline

Posted: 21 Jan 2005 03:33 AM PST

Have you tried clearing the Outlook Forms cache?

Is there an error that is produced?

"Jack Nielsen" <dk (Fjern nospam)> wrote in message
news:ev6lsz6$phx.gbl... 
all 

one question about using Exchange 2003

Posted: 20 Jan 2005 04:51 PM PST

For two years now there has been no problem with the CRM connector under
Exchange 2000. We implemented the connector to MSCRM 1.2 with Exchange 2003
without incident. But, we did run into a problem with a spam filter that
would filter some mail sent via MSCRM. The emails were in quaritine, but no
virus was noted. Only that it violated the heristic rule. Be aware of odd
behavior like this.


"Karolina" wrote:
 

Why are we prompted for login?

Posted: 20 Jan 2005 04:43 PM PST

Also, check the IE settings of the client where this is happening. Is it
showing that it's in the Loacl intranet zone? If not, you may need ot add the
CRM erver name to that. Then you may also need to verify that the IE settings
for that zone are set to allow integrated login (via the advanced settings for
the zone).

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 21 Jan 2005 08:16:05 -0800, "Gary" <virtium.com> wrote:

Is the client machine properly setup in the domain? How are you logging into
the client machine?

Make sure the client is in the domain that the crm system is in,....also
check that DNS is working. Try pinging the crm name (not ip).....

-Gary

"Pradeep Tapadiya" <microsoft.com> wrote in
message news:com... 
login 
this 

CRM Security Service Will Not Start Automatically (But Will Manual

Posted: 20 Jan 2005 02:25 PM PST

to reregister the securityservice to be dependant on SQL , run the following
command

crmsecurityservice.exe -r -s

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 21 Jan 2005 00:12:08 -0600, "Laz" <askme> wrote:

By default, the CRM installation does not set a dependency on SQL server for
the security service. You can set the Security Service to be dependent on
the SQL server only if both applications are running on the same server.

Blk

"pittpanther" <microsoft.com> wrote in message
news:com... 

CRM Installation Test Takers

Posted: 20 Jan 2005 02:03 PM PST

No


<us> wrote in message
news:googlegroups.com... 

Viewing only contact I'M owner

Posted: 20 Jan 2005 11:22 AM PST

You are probably right, it seems to have "updated" through the night as
it seems to enforce the new rules this morning!

thanks guys

difference between "Append" and "Append to"

Posted: 19 Jan 2005 01:51 AM PST

Thanks Matt!!!

Connecting without using deafault credential

Posted: 18 Jan 2005 06:44 PM PST

The 2 issues could be related. Are you using a DNS name or an IP to access CRM?
If you are using an IP, then it assumes the machine is in the Internet zone and
you will most likely be prompted for credentials. You may need to add the
machine to your Local Intranet zone in IE. Does this same thing happen from
other client machines or just yours?

The 401 could be coming from the above issue or it could be a number of other
issues. Where is the code deployed? on the CRM erver or another machine? If
it's on a nother machine, try putting it on the CRM server. Web apps have
trouble passing the credentials through properly. Make sure your virtual
directory is configured to run with the same auth reqs as the CRM site. Also,
try passing in explicit creditisla vs default credentials to see if it's an
integrated security issue or not.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 20 Jan 2005 19:14:58 -0800, "Sansanee" <com> wrote:

Hello Matt,

Thank you for your help.

I actually have a slightly different problem. I try to connect to the CRM
system using the default credentials, as follows:


// BizUser proxy object
Microsoft.CRM.Proxy.BizUser oBizUser = new Microsoft.CRM.Proxy.BizUser ();
oBizUser.Credentials = System.Net.CredentialCache.DefaultCredentials;
oBizUser.Url = strDir + "BizUser.srf";

Microsoft.CRM.Proxy.CUserAuth oUserAuth = oBizUser.WhoAmI();

The call to WhoAmI fails with HTTP 401 (Unauthorized access). This is
strange as I do have a user account on the machine.

There is another thing that is strange. When I go into IE and try to connect
to the CRM system, it asks me for the login information. I don't understand
why it does that. IIS is set up for integrated Windows authentication. I
never have this problem when I connect to Exchange Server using Outlook Web
Access.

I appreciate your help.

Sunny


"Matt Parks" <com> wrote in message
news:com... 
run. 
option is 
wrote: 
Subscribe to: Posts (Atom)