Pages

Search

Microsoft Word - Word Cannot Complete The Save Due To A File Permission Error

Microsoft Word - Word Cannot Complete The Save Due To A File Permission Error

Word Cannot Complete The Save Due To A File Permission Error

Posted: 05 Sep 2013 01:38 PM PDT

When I tried to save my file "Word Cannot Complete The Save Due To A File Permission Error" would not allow me to save it. Word stopped working and closed down. After that the file was removed from it's original saving place and now I can't find it. When I search for the file I only find the shortcut, which cannot be opened. Where is my file and how do I get it back?

 

Thanks for your help!

 

how can i get it to print from the notebook

Posted: 05 Sep 2013 12:48 PM PDT

ive tried everything . I wrote lettes on the word  and on notebooks and I can't get anything to print on my computer since I install the microsolft word or office. I need help now and some one to tell me how to print off of this program. im very disappoint in buying this program , for it doesn''t do what I  want it to do . PRINT MY PAPERS.

Column Headings in the Index

Posted: 05 Sep 2013 12:27 PM PDT

I have gone through the laborious process of creating an index with the surname Main Entry, followed by the Sub-entry given name and page numbers. It looks really good however if the given names of a specific surname exceed the column length, the surname doesn't repeat on the next column or page. How do I correct this. 

This screen shot isn't very good but if you look closely you will notice "King" at the end of page 192 but the first names belonging to surname "King" are at the beginning of the next page. Also the Kings continue on the second column but "King" does not proceed the column.

NewCenturySchlbk font vs. New Century Schoolbook font

Posted: 05 Sep 2013 11:24 AM PDT

I typically use New Century Schoolbook as my font.  Word 2010 seems to have an embedded font that is similar, but not as readable, called NewCenturySchlbk.  It often spontaneously substitutes the latter for the former.  The really bizarre thing is that the NewCenturySchlbk does not even show up in the Windows/Fonts folder, and a search of the entire computer doesn't turn up anything.  Does anyone (Susan Barnhill leaps to mind since as far as I can tell she knows everything there is to know about Office) know where to find it and how I can get rid of that font permanently?

Things I have tried:
1.  Using font substitution to replace NewCenturySchlbk with New Century Schoolbook.
2.  Hacking the registry to change references from one to the other.
3.  Prayer
4.  Using foul language
5.  Blaming my colleagues

Many thanks.

Strange line in header

Posted: 05 Sep 2013 11:24 AM PDT

I have a document with several sections.  In one section, there is a horizontal line from left page edge to right.  See screen capture below.  I took the screen cap while in review mode, so that is why there is the gray area to the right.  I have opened headers for edit and tried click on the line on every page.  Can not see where this was inserted.  Any thoughts?  Thanks.

How do I create a template for end users to insert their own photograph without changing the layout?

Posted: 05 Sep 2013 10:35 AM PDT

I am creating a brochure template for multiple end users who all want to customize it with their own information and pictures. I have figured out everything except how they can insert a picture without changing the layout. I need to lock the properties of the picture box so it remains the same size and porportion. I am creating this on a Mac using Office 2011. I am not sure what versions of Office the end users will have.

Merge Word Documents, but keep Save Date

Posted: 05 Sep 2013 10:30 AM PDT

Hi again!!

Just wondering if there was any easy way to merge documents, BUT there is something important it must do.

I use my laptop for school work, and therefore I would like it so that when I print off my work, it prints off continuously on paper, therefore cutting the amount of paper that is used. However, on my template that I use, it has an automatic date feature that updates when I save the file, therefore showing the day I made the document. Is there any other way I could merge the word documents, but keep the individual dates?

Thanks

Tom

help with downloaoing Word 2013

Posted: 05 Sep 2013 09:45 AM PDT

I purchased just now Word 2013 for $79.99 on the Internet. I have an install file in my downloads. When I click it on and then click RUN I get (first - we ran into an error) and then the next time (can't install busy with other programs, which is not true ... on Firefox which I need to open to get the download). I have turned my computer on and off and closed all programs. What can I do?

How to enable hyperlinks in Word-2010

Posted: 05 Sep 2013 09:27 AM PDT

I get the message : "This Operation Has Been Cancelled Due to Restrictions in Effect on This Computer"

 

when I control+click on hyperlinks in Word2010 documents. They worked before.

Word 2013: adjustable widdow and orphan control?

Posted: 05 Sep 2013 08:31 AM PDT

Earlier versions of Word allowed to adjust several values that controlled its behavior re. line and page breaks.

Since I have a couple of very ugly page breaks in my current document I wanted to adjust these settings to provide more pleasant formatting but I couldn't find any if these settings in Word 2013 any more.

 

Are these settings gone, just hard to find (if so: where?) or not meant to be user-adjusted any more?

 

M.

 

BTW: I don't mind fiddling with registry settings, in case that's the only option to tweak these settings...

block/allow specific office web apps

Posted: 05 Sep 2013 08:09 AM PDT

I need to find a way to allow or white list only approved applications on my network. 

Microsoft confirmed this is possible but could not provide any further software or explanation on how this is done. 

my labels are double spacing even though the documents are set to single space

Posted: 05 Sep 2013 08:07 AM PDT

my labels are double spacing even though I have the documents set for single space

Bug when closing Office window?

Posted: 05 Sep 2013 07:48 AM PDT

I have 400 documents that I shall open, check and then close again. I open them one at a time in explorer, check what I should check then close them. With programs that works the window will close and I'll be back in the explorer. But with Word and other Office programs I won't come back to the Explorer. Apparently there is a bug that makes Windows consider all Word windows as one, so instead of just closing the window it also tabs me over to a completely unrelated Word window which happens to be open.
So in short, the bug causes Word to also switch over to another open Word window instead of just closing the one I was using.
Is there a way to get around this bug? It's really annoying when Microsoft tells me that I want to switch to another window 400 times in a work day when I don't want to switch windows at all.

The macro cannot be found

Posted: 05 Sep 2013 07:43 AM PDT

I've been receiving the following message for some time.  I've searched various forums, help files, tried all kinds of things (including reducing security levels) with no luck.  Does anyone know how to determine WHICH macro it's complaining about?  That might help me recover/replace it.  Here's the message:

 

The macro cannot be found or has been disabled because of your Macro security settings.

 

This message can appear if:

 

 

If the macro security settings are not allowing the macro to run, you should confirm the origin of the macro to be sure that it can be trusted (contact the developer or the source for the macro). You can then temporarily enable all macros by using the following procedure.

 

 

NOTE: Be sure to change this option back to its original setting after you have run the macro.

If the macro is not accessible because the template is not loaded, click the File tab, click Options, and then click Add-Ins. At the bottom of the Add-Ins pane, select Templates from the Manage drop down list, and then click Go. In the Templates and Add-ins dialog box, click either Attach or Add. If the macro is not in the template, you may need to copy the macro from one template to another. Click the Organizer button at the bottom of the Templates and Add-ins dialog box to start the Organizer utility.

 

Word 2010 Abends when recoding a Macro

Posted: 05 Sep 2013 07:04 AM PDT

I try to record a Word 2010 macro, and in doing so, I can make the program abend every time!!  Here is what I'm doing and I feel it's very simple stuff, all-keyboard input.  I put a small .jpg in a new Word document and the cursor is to the right of this document.  I then start recording my macro with these steps:

 

SHIFT + Left Arrow        /* To select the graphic */

ALT                                 /* To get the special keys to appear */

JP                                   /* To take you to the Format page */

sz                                  /* To take you to the Size page */

ALT + h                        /* To take you to the Scale/height box */

60                                /* To change the height to 60% */

TAB                              /* To change the width to 60% */

ENTER                          /* To push the OK button and we're done */

 

 

BOOM!!!  Program abends every time!!! 

it want let me use or sign in to word

Posted: 05 Sep 2013 06:00 AM PDT

hi I have a new laptop and it want let me sign in are use word

table styles: default language

Posted: 05 Sep 2013 04:40 AM PDT

Hi,

So, I am having a problem with Word 2010.  Whenever I insert a table (from the insert tab) the default language for the table is set to English (U.S.) [Reveal Formatting] ~ however; my default language is English (U.K.) - and this is correctly set everywhere.  also, English (U.S.) is not even an additional language in any of the Word Options; Keyboard Options; Computer options anywhere on my machine.

The issue I am having is that when I try and modify the table style ~ there is no option to change or set the Language.  So; my assumption is that it is pulling the Language from "Table Normal" ~ which is not editable.

Sure,  I can select the whole document and set the proofing language to English (U.K.) However for tables; this is applied as "Direct Formatting" - it doesn't change the default language.

So, to this end; if anyone can tell me how I can change the default language for tables to be English (U.K.)  I would be grateful.

Many thanks,

Julian

Excel Spreadsheet into a word document

Posted: 05 Sep 2013 03:02 AM PDT

Have been using Spreadsheet in Word documents all the time.

However, when opening older document and even creating new documents with spreadsheet,

we receive this { EMBED Excel.Sheet.12 } on the page instead of the sreadsheet

 

How doe we correct this?

Cannot Open Office 2010 Software

Posted: 05 Sep 2013 02:07 AM PDT

When I try to open word or any other Office 2010 software (for home and student) I get an error message "Microsoft Word 2010 cannot be opened. Check you internet connection and the try again".  However the internet connection is OK.   The same happens for Excel, Powerpoint etc. Any suggestions very much appreciated.

Need help with creating PRN file in Word Perfect

Posted: 04 Sep 2013 10:15 PM PDT

I have installed Generic Printer following all instructions.  When I print-to-file a document in Word Perfect, the resulting PRN file does not look the same as the original -- the total number of lines is off  (PRN  is about 3 or 4 lines longer).  I need to be able to create the PRN that looks exactly the same as the original.  Please help.

how to wrap a group of text and shapes in order to copy it all together?

Posted: 04 Sep 2013 07:10 PM PDT

 

Name:                                 

 

Month:                                 

 

Amount Dues:                                 

                

           10 month

 

          

           12 month

 

Local 118

 

Mail to: 



this is what i have. i also have check boxes next to 10 and 12 month. Now how can i group all this together so i can copy the lines, text, and squares all together. I dont feel like remaking all of these text boxes.

Word 2007 problem sending the command to the program

Posted: 04 Sep 2013 05:53 PM PDT

Word 2007 will not open saying there is a problem sending the command to the program.  It started when I opened an email docx attachment. I tried doc attachments and get the same message.  It is not the word documents as they open on my I-Phone as well as another pc.  Excel and other office products open.  What is the problem and how do I correct this?

"This modification is not allowed because the document is opened for viewing only" - So... how do I edit the document I created?

Posted: 04 Sep 2013 05:35 PM PDT

Support has suggested I run a repair on Office, which I did to no avail.

I created several documents in Word, that I can no longer edit.  The only thing that's different is that I recently installed some Windows updates, and I'm wondering if they've caused this.

In the properties, the documents are not read only, plus I've not password protected them.

Also, the ribbon at the top is gone, and I'm left with three tabs:  File, Tools and View.

HELP! 

My windows 8 Word cannot open my .doc and .docx documents. Please advise.

Posted: 04 Sep 2013 04:22 PM PDT

My windows 8 Word cannot open my .doc and .docx documents.  Please advise.

PDF to MS Word

Posted: 04 Sep 2013 04:11 PM PDT

Hi Microsoft Community,

I have a word document with editable text that I want to convert to a picture so I can insert it into another word document without having to edit or format the styles.

I converted the source doc into a PDF but would like to know how to take the PDF pages and insert them into my destination doc as images?

I'd appreciate any other ideas of doing this as well.

Thank you in advance.

Is this the wrong group? - Microsoft Office forums

Is this the wrong group? - Microsoft Office forums

Is this the wrong group?

Posted: 23 Feb 2005 12:55 PM PST

Yes, I suppose, since this is for clean installations of Windows 2000.

"HelpMe" wrote:
 

Share OutLook Contacts with Word?

Posted: 23 Feb 2005 10:16 AM PST

Thank you for pointing that out.

<%= Clinton Gallagher

"Jason Galbreath" <nospam> wrote in message
news:%phx.gbl... 

Change 'Open Office Document' Location?

Posted: 22 Feb 2005 02:56 PM PST

Oh, okay. Well I don't see what version of any software you are using,
but other users who tried to do the same thing you are hoping to do
have accomplished this by by resetting the My Documents folder through
the Places Bar adjustments with the addin interface or through the
registry settings. See these articles...

How to customize the Places Bar in Office 2000
http://support.microsoft.com/kb/q205041/

More on the Places Bar w/screen shots in this article...

Find Word's Buried Treasures
http://www.computorcompanion.com/LPMArticle.asp?ID=133

Good luck...

Dian D. Chapman, Technical Consultant
Microsoft MVP, MOS Certified
Editor/TechTrax Ezine

Free MS Tutorials: http://www.mousetrax.com/techtrax
Free Word eBook: http://www.mousetrax.com/books.html
Optimize your business docs: http://www.mousetrax.com/consulting
Learn VBA the easy way: http://www.mousetrax.com/techcourses.html



On Wed, 23 Feb 2005 12:14:40 -0600, "clintonG"
<com> wrote:
 

Office 2003 deployment issues

Posted: 22 Feb 2005 12:24 PM PST

We don't require an uninstall in order to do the initial install. Where the
uninstall comes into play is when our support department needs to have
someone uninstall and then re-install. They frequently do this in order to
solve problems. One of our requirements for corporate deployment is the
install should not give them a UI. During this re-install right now the
only way I've found to re-install is through the full UI. Below is the
command we use for the initial install and also the re-install. I've tried
adding REINSTALL=ALL and the REINSTALLMODE properties with no success.

\\fs-ent\tstdapps\Office2003\StdSP1\setupstd.exe
TRANSFORMS=\\fs-ent\tstdapps\Office2003\StdSP1\ApsOffStd.MST /qb+ /L*V
c:\sms-hist\Office2003.log

Jason Galbreath
Arizona Public Service

"Bob Buckland ?:-)" <75214.226(At Beautiful Downtown)compuserve.com> wrote
in message news:%phx.gbl... 
news:phx.gbl... 
the 
office 

Outlook Encryption program ???

Posted: 22 Feb 2005 11:05 AM PST

I'm looking for a solution that would be versital/universal across multiple
types of email solutions.

"Jim Vierra" wrote:
 

Office 2003 Product Activation Question

Posted: 22 Feb 2005 08:05 AM PST

"JBL" <com> wrote in
news:phx.gbl:
 

From some of the posts here, I believe that the call is pretty
painless.

Slipstream Office Service Packs

Posted: 21 Feb 2005 03:29 PM PST

It depends on which version of office you are updating. If OfficeXP then
you can't reburn it to CD unless someone knows how to fix the problem I'm
having. See my post "MSI admin update for OfficXP_pro SP3 results 860mb
directory"

"neo [mvp outlook]" <mvps.org> wrote in message
news:%phx.gbl... 

MSI admin update for OfficXP_pro SP3 results 860mb directory

Posted: 20 Feb 2005 10:14 PM PST

I think you just mentioned what the problem is, you are trying to slipstream
a service pack to a cached CD copy and not an administrative install point.
I think the best you can do with a cached CD copy is chain the install of
the service pack.

"Sean Mercer" <net> wrote in message
news:eq3Td.14454$lga... 

Question about MS Office Editor in Outlook

Posted: 20 Feb 2005 06:55 AM PST

Great...thanks for letting us know the TechTrax article helped and
thanks for the thanks.

Cheers!

Dian D. Chapman, Technical Consultant
Microsoft MVP, MOS Certified
Editor/TechTrax Ezine

Free MS Tutorials: http://www.mousetrax.com/techtrax
Free Word eBook: http://www.mousetrax.com/books.html
Optimize your business docs: http://www.mousetrax.com/consulting
Learn VBA the easy way: http://www.mousetrax.com/techcourses.html


On Sun, 20 Feb 2005 15:50:32 -0500, "Hans Crump"
<att.net> wrote:
 

Error when opening document with Word 2003

Posted: 20 Feb 2005 01:43 AM PST

Thanks. That was it....

--
Regards,
Hank Arnold

"garfield-n-odie" <microsoft.com> wrote in message
news:uI%phx.gbl... 

Office 2003 icons

Posted: 19 Feb 2005 11:07 AM PST

Go to control panel -- display -- settings -- advanced -- and check if dpi
settings is set to 96 dpi or not. As Office 2003 supports only upto 96 DPI

Regards

VS

"Bernard Liengme" wrote:
 

typed in the wrong product ID?

Posted: 19 Feb 2005 09:41 AM PST

Stacey273 wrote: 


1) I assume you meant the "product installation key" not the "product ID"
they are not one and the same.

2) You must be incredibly talented to type in an invalid installation key
and have the installation routine accept it. I have made mistakes in the
installation key dozens of times and never once has it been accepted as
valid.

3) How to Compose a Good Newsgroup Post
http://dts-l.org/goodpost.htm

How to Act Smart on Usenet
http://www.catb.org/~esr/faqs/smart-questions.html

Getting Your Post Noticed - and Answered
http://www.microsoft.com/presspass/features/2001/Mar01/Mar27pmvp.asp

How Not to Get Help in Newsgroups
http://users.tpg.com.au/bzyhjr/liszt.html

Otherwise, you might as well try here:

Psychic Friends Network
(800) 592-7827

--
Facon - the artificial bacon bits you get in Pizza Hut for sprinkling
on salads.

Microsoft Office 2000 Professional Setup for Disk 2

Posted: 18 Feb 2005 10:09 PM PST

No, I haven't tried copying the disc to my hard drive...wouldn't the
corrupted file still be corrupted if it were copied to the hard disc?

"Milly Staples [MVP - Outlook]" wrote:
 

Speech trouble

Posted: 18 Feb 2005 05:27 PM PST

Hi Mum,

The Office (Word) speech recognition feature supports
U.S. English rather than UK or AUS.

You shouldn't need to reinstall Word from MS Works Suite
but you may want to check your settings for the
Speech/Text input area to set that part up for
U.S. English.

========
<<"surfermum" <microsoft.com> wrote in message news:com...
I installed Microsoft 2004 Works suite using Australian language as the
preference. I then tried to setup the Speech Utility and it worked during
the initial setup with the training appearing to work but as soon as I went
into Word to use Speech it did not respond at all. Is this because I need to
uninstall and re-install the Microsoft 2004 Works Suite in US English
language rather than Australian?
--
surfermum<<
--
Let us know if this helped you,

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx

How do I install my Office 2000 on my Windows XP?

Posted: 18 Feb 2005 08:01 AM PST

OK, My ME OS was on my old computer along with my MS Office 2000. When I got
my new computer I installed the XP upgrade using the ME Disk and Product Key
Code from it to install the upgrade. Someone mentioned something about OEM
of my old system and this wont install on my new one. So, they told me to
get into the Office Newsgroup for the answer. Does this give you anymore
info to try and help me solve this?

"Milly Staples [MVP - Outlook]" wrote:
 

How do I set up instant messaging?

Posted: 17 Feb 2005 06:19 PM PST

Thank You G-n-O. I'll give it a whirl.
jp

"garfield-n-odie" wrote:
 

Object library not registerd

Posted: 17 Feb 2005 06:08 PM PST

Eureka, I found the problem!

Permit to pause whilst I let off some steam.

Hsssssssssssssssssssssssssssssssssssssssss!

Ah, that felt good.

After spending severals hours today uninstalling, re-installing, using
eraser97 and manually removing things, I was finally able to re-install
Office and not have the error occur.

However, my glee was short lived!

When I restored my global templates to the Startup directory, the error
re-appeared!

I then added the templates to the Startup directory 1 at a time and found
the problem.

On 4 Oct 2004, I had modified one of the global templates and somehow the
reference to the VBA extensibility library 5.3 was "MISSING". Due to changes
I made back in Oct, I'm not even sure thgat the reference is any longer
necessary, which is likely why I neverr noticed a problem.

So, it would appear that I had not used Tools | References in Word 97 since
at least 4 October 2004.

All I had to do was correct the reference in a copy of the gloabal template
that was not in the Startup directory, then replace the critter in the
Startup directory.

I used Retrospect to restore the C drive to yesterday's files, then replaced
the template.

Solution was simple.
Path to finding it very difficult.

MSFT error message not very useful.

Why did it not just tell me that there was a specific midssing reference?

Taskbar question . . .

Posted: 17 Feb 2005 04:26 PM PST

Thank you, but this is for arranging worksheets. I want the taskbar button
in the taskbar to be stacked with all of my open worksheet on it, instead I
have either one taskbar button without the open worksheets, or each
worksheet has a different button.
Thanks

"Jacky Gu [MSFT]" <microsoft.com> wrote in message
news:phx.gbl... 

How to add Key Software in th .ini file

Posted: 17 Feb 2005 10:51 AM PST

Michael Bednarek wrote: 

Yep. I do either of the following:

1. Use new PCs with bundled OEM (and preinstalled Office)
2. Get X number of licenses via the Open License Program.

No SA for any of my clients thus far. MOLP is cheaper than box products, no
matter how you slice it.

Removing Office XP without the original disc

Posted: 16 Feb 2005 07:57 PM PST

thanks

"garfield-n-odie" wrote:
 

Reinstalling Office 97 on XP home edition

Posted: 16 Feb 2005 06:35 PM PST

On Wed, 16 Feb 2005 18:35:14 -0800, Michael Dean <Michael
microsoft.com> wrote: 

You are comparing Oranges and Plums

The 21 digit number is the product ID, not the install key

The install key is 4 digits, a space, and 7 more digits

The install key is on a sticker on the CD case, usually with a
BIG notice "do not lose this number" on the sticker


John Thomas Smith
http://www.direct2usales.com
http://www.pacifier.com/~jtsmith

Deploying Office 2000 AND 2003 via GPO

Posted: 16 Feb 2005 03:02 PM PST

Thanks Neo. Looks like I'll have to find another solution; this excerpt
from your linked article sums it up:

"Using Group Policy software installation
"Group Policy software installation works directly with the MSI file and
bypasses Office 2003 Setup and the Setup.ini file when assigning or
publishing packages. For this reason, you cannot use Setup.exe to chain
Office 2003 installations when you assign or publish packages. Instead,
Microsoft Windows deploys Office 2003, the Office 2003 Multilingual User
Interface Pack, and other Office-related packages separately and in random
order. Because Office 2003 must be installed first, before a MUI Pack
installation can succeed, you cannot use chaining with Group Policy software
installation to combine these installations."

Thanks for the good resource.

Bryan


"neo [mvp outlook]" <mvps.org> wrote in message
news:phx.gbl... 

install issue

Posted: 16 Feb 2005 10:09 AM PST

Thanks for URL ... it addressed all my questions.

"garfield-n-odie" wrote:
 

Fatal Error on Installaion - again and still

Posted: 15 Feb 2005 06:13 PM PST

"garfield-n-odie" <microsoft.com> wrote in message
news:phx.gbl... 


Well, I noticed that you spent a lot more time responding to how you don't
like the way I post, and zero time on solving the problem or suggesting any
ideas.

Works Suite interface for Office 2003

Posted: 15 Feb 2005 03:31 PM PST

You' re no tick. You're just sick.

"Miss Perspicacia Tick" wrote:
 

Open Office - [discuss] what does the program do ?

Open Office - [discuss] what does the program do ?

[discuss] what does the program do ?

Posted: 04 Nov 2009 04:34 PM PST

On Wed, 4 Nov 2009, - wrote:
 

Did you bother to go to the openoffice.org web site? If not, why?

--
Bob Holtzman
Key ID: 8D549279
"If you think you're getting free lunch,
check the price of the beer"

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Two ideas for improving openoffice

Posted: 22 Oct 2009 10:45 PM PDT

jonathon wrote (26-10-2009 23:01)
\ 

That we never may forget 8-)

--
Cor Nouws
- nl.OpenOffice.org marketing contact
- Community Contributor Representative in the Community Council
Gevoel niet vrij te zijn? Zie www.nieuwsteversie.nl

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Search function for the special character menu

Posted: 19 Oct 2009 11:44 AM PDT

On Tuesday 20 October 2009 07:44:48 Hab einen wrote: 

Ooh, one of my favorite extensions! :)

Called AltSearch

http://extensions.services.openoffice.org/project/AltSearch

Never have an OOo install without it.

 

Cheers
GL



--
Graham Lauder,
OpenOffice.org MarCon (Marketing Contact) NZ
http://marketing.openoffice.org/contacts.html

INGOTs Moderator New Zealand
www.theingots.org.nz


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Hosting Open Office

Posted: 17 Oct 2009 12:15 PM PDT

On Sunday 18 October 2009 08:15:25 Jaime Hernandez wrote: 

Hi Jaime,

You need the distribution project;

http://distribution.openoffice.org

Cheers
GL

--
Graham Lauder,
OpenOffice.org MarCon (Marketing Contact) NZ
http://marketing.openoffice.org/contacts.html

INGOTs Moderator New Zealand
www.theingots.org.nz


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

Microsoft CRM - So slow

Microsoft CRM - So slow

So slow

Posted: 08 Jun 2004 04:31 PM PDT

>>

"Gary" wrote:
 

Importing Outlook contacts

Posted: 08 Jun 2004 02:18 PM PDT

yes its possible to bulk load accounts into crm, but it'll require you going through sql (directly into crm db
we've bulk loaded about 2000 accounts successfully using DTS to load into AccountBase and CustomerAddressBas

your import file(s) will need to be modified to map fields in those 2 tables
example accountbase_import.cs
uniqid,,,,,1,3,,,,,0,,ownerbu,,created,,,,,False,\ "company\",\"\",,,\"\",\"\",,,,\"\",\"\",\"\",\"\" ,\"\",\"\",\"\",False,False,\"\",False,\"\",\"\",\ "\",False,,,,False,False,date,c_user,date,c_user,\ "security\",binary,,,0,,1,,\r\n"

uniqid id = gui
ownerbu = owning businnes uni
created = created by (usually guid from admin account
company = company nam
date = created date/modified dat
c_user = created by / modified b
security = security descriptor (this one is tricky
binary = 16 digit random number will d

*note this is not supported by m

hope this helps

Microsoft Security Bulletins for June 2004

Posted: 08 Jun 2004 10:01 AM PDT

it is

http://www.microsoft.com/security/bulletins/200406_crystal.mspx

I just saw it at a different location and wanted to pass the information
along.

"Robert Chao" <com> wrote in message
news:com... 
ANY 
never 
into 

Sales for Outlook - SQL desktop not connected?

Posted: 08 Jun 2004 09:51 AM PDT

I'm not sure, but I don't think we saw this issue with version 1.0 of SFO. I
mainly ran into this solution because I was trying to register a client MSDE
from our SQL server enterprise manager but it wasn't connecting, but the
client was working fine. I could even ping it fine. After some googling I
found out that the SQL instance (server, not client) on the client machine
needs tcp/ip enabled. The synch process just needs tcp/ip for the client,
not so much server, unless you want to register it remotely........

*shrug*

-Gary

"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 
issue 
you 

Access Denied in CRM for Outlook

Posted: 08 Jun 2004 09:24 AM PDT

Ian

I was told about this fix from Microsoft. Here is a similar article


TechKnowledge
Error "The Logged On User Does Not Have Sufficient Security
Permissions" When the Client is Offline Trying to Access a Microsoft CRM
Folder


Return to previous page

Document ID: 31692
Date Created: 6/30/2003
Date Last Modified: 8/6/2003
Language: English - United States
Country: USA
Product: Microsoft CRM
Versions: 1.0
Modules: Microsoft CRM Sales for Outlook

Issue

Error - "The logged on user does not have sufficient security
permissions to view these records or perform the specific action. For more
information, contact your system administrator." occurs when the client is
offline and tries to access any of the Microsoft CRM folders.

Resolution

A. Make a backup of the MSCRM registry key before following
these steps.

To make a backup follow these steps:

1. Go to Start | Run and type in Regedit.

2. Then expand HKEY_LOCAL_MACHINE | SOFTWARE | Microsoft |
MSCRM.

3. Right click on the MSCRM folder.

4. Choose Export.

5. Then save the backup.

B. Make sure you are offline in the Sales for Outlook Client and
then follow these steps.

1. Go to Start | Run and type in regedit on your Microsoft CRM
Sales for Outlook client.

2. Then go to HKEY_LOCAL_MACHINE | SOFTWARE | Microsoft | MSCRM
| UserSecInfo.

3. Right click UserSecInfo and choose modify.

4. Change the first two digits to 00.

Now try to access the Microsoft CRM application when you are
offline.






<microsoft.com> wrote in message
news:19d5f01c44d8c$e26c8720$gbl... 

KDC Errors for CRM server

Posted: 08 Jun 2004 07:41 AM PDT

Yup, just take a note of what the duplicate entry is before you delete it
(with ADSIEdit.msc), this way if any issues arise you can just revert back.


"vikrantca" <com> wrote in message
news:com... 
delete the SPN (of expansion.ceeed.umd.edu) associated with it ? 

Does you need a server to run MS CRm?

Posted: 08 Jun 2004 07:26 AM PDT

You need a web server for the crm web server. A SQL server for the CRM
database. You only need Exchange server if you want to send and receive
email into CRM. Note that you cannot use any other mail server other than
Exchange.

Beyond that you also need to be on an Active Directory enabled network.


"Gunnar Johansson" <com> wrote in message
news:ca4iac$6cv$wplus.net... 
to 

Multi language CRM

Posted: 08 Jun 2004 02:19 AM PDT

No, its not possible.

Peter Lynch


"Chris Cartledge" <onsitemarketingsolutions.com> wrote in
message news:phx.gbl... 
but 
3 
possible? 

MICROSOFT CRM URL

Posted: 07 Jun 2004 06:19 PM PDT

i meant the client side sql database by the way :-)


"Hansel Yune" <com> wrote in message
news:phx.gbl... 
it 

Lotos Notes

Posted: 07 Jun 2004 03:24 PM PDT

Nery,
I think we can say with absoulte certainty that Micorsoft will not
break a leg to make this product avialable in Lotus. Third party
companies may develop something in the future, but this product is
"brand new".

You may find something more efficient to deploy from www.lotus.com.

Good luck :)
JB

"Nery" <net.gt> wrote in message news:<195d201c44cde$22619e10$gbl>... 

How can we hide accounts from Salesperson users?

Posted: 07 Jun 2004 11:45 AM PDT

HI

There are so many ways of doing it in CRM. Firstly, by creating business units, assigning the users to one BU and the managers to the parent BU and modify the roles accordingly. Or put everyone in the same BU and modify the roles accordingly, in other words, give managers bu lever read access and users User Level read access to those record types you wish, for example only contacts or accounts.

Crystal Reports Licenses

Posted: 07 Jun 2004 11:18 AM PDT

Martin is right

My mistake, sorry.

How To Import Blank Fields into Picklist Fields

Posted: 07 Jun 2004 09:38 AM PDT

Another alternative would be to just update the tables directly after the Import
via SQL. Direct updates are technically not supported, but as long as you are
updating something basic (like a picklist), then there usually isn't any impact.

Matt Parks

----------------------------------------
----------------------------------------
On Mon, 7 Jun 2004 22:16:03 -0700, Andrew <net.au> wrote:

Hi Ian,

Had the same problem.
A simple workaround that worked for me is to map the blank field to "Default
Value", import the Contacts and subsequently run a Manual Workflow to test for
this and plug in "Null" when found.
For multiple blank fields, set up dummy discreet values in the picklist/s to be
imported to, map the blank fields to them and plug "Nulls" as above.

Not elegent I grant you but .......

Hope this helps.
Andrew Sage

Help to bind a new form on an account

Posted: 07 Jun 2004 09:04 AM PDT

Thanks for your help,
In fact, I think the problem come from the CredentialCache class.
When I'm using your code example, the compiler error message is :

Compiler Error Message: CS1519: Invalid token '=' in class, struct, or
interface member declaration
in the line : usuario.Credentials =
System.Net.CredentialCache.DefaultCredentials;

Have you got any idea to solve this problem?


"Vinícius Pitta Lima de Araújo" <com.br> a écrit dans le
message de news:18fb801c44cbc$cf12e0a0$gbl...
Are you using the BizUser class right? I am using this
class to retrieve the authenticated user and works fines.

Try it:
BizUser usuario = new BizUser();

usuario.Credentials =
System.Net.CredentialCache.DefaultCredentials;

//diretorioVirtual = 'http://' + '<your crm host>'
//+ '/mscrmservices/'
usuario.Url = diretorioVirtual + "BizUser.srf";

//here the SystemUserId ;)
usuarioId = usuario.WhoAmI().UserId;

I hope who this help.
[]'s
Vinícius Pitta Lima de Araújo 
the management of the 
user id in this page, 
not work. 
in the contact form. 

CRM controls

Posted: 07 Jun 2004 08:26 AM PDT

another option for you

http://www.customereffective.com/products_dc.html


"matt" <com> wrote in message
news:com... 
resources that would help with this let me know. it would be greatly
appreciated. 
Subscribe to: Posts (Atom)