Pages

Search

Microsoft Word - Word for iPad won't list OneDrive Files

Microsoft Word - Word for iPad won't list OneDrive Files


Word for iPad won't list OneDrive Files

Posted: 20 Jul 2014 07:35 AM PDT

I have been using OpenOffice on my Windows computer and OfficeSuite on my iPad since Microsoft Office was not available everywhere.  When Word for iPad came out, I purchased Office 365 and have it on my computer and iPad.  I am having trouble with my Word for iPad.  The app itself works fine, but I can't open my files on Onedrive (which is where I save my files so I can access them everywhere).  When I open Word for iPad and go to my OneDrive Documents, I get an error to check my internet connection (but only when I go to Documents, it works fine when I go to Music or Pictures or Recent Files), but I am connected.  Very annoying and I had to go back to OfficeSuite and will have to not renew my Office 365 if not fixed soon.  This has been a problem for months, and still not fixed.

ms word program and file does not open

Posted: 20 Jul 2014 02:14 AM PDT

"Windows cannot access the specified device, path, or file" error when you try to install, update or start a program or file

heading automation in the header

Posted: 20 Jul 2014 01:23 AM PDT

Hej!

I have a problem with the automation of the headline.

In the header, I want the heading formatted with "heading 2". But, if there is no "heading 2" under "heading 1", there should be "heading 1" in the headline.

 

The following solutions with code fields are not working, I have already tried:
  • { STYLEREF "heading 2" } -->  I get the heading, e.g. 1.3, from the last chapter, when there is no subchapter in the following chapter (no subchapter 2.1).
  • IF { STYLEREF "heading 2"  \r \t } > { STYLEREF "heading 1" \r \t } "{ STYLEREF  "heading 2" }" "{ STYLEREF "heading 1" }" --> I get only "STYLEREF" in the header
  • IF { COMPARE { STYLEREF "heading 2" \r \t } > { STYLEREF "heading 1" \r \t} } = 1 "{ STYLEREF "heading 2" } " "{ STYLEREF "heading 1" }" --> I get "COMPARE" in the header

I hope you could help me finding a solution!

Thank you!

Something went Wrong Error // Tried Everything!

Posted: 19 Jul 2014 10:17 PM PDT

For some odd reason, I can't open any of my Microsoft products like Word, Note, Excel, and ect ect. I have tried the whole restarting my computer (about four times), doing the whole change and repair online junk, and I have even tried to uninstall it. Nothing works, and this is quite upsetting because I need these programs... :c

I start school soon, and like I said I need them... I don't know what else to do..

Select text in a single Word section VBA

Posted: 19 Jul 2014 09:18 PM PDT

Is there a way to select all the contents of a single Word section without selecting the section break.  I want to write VBA code to delete all contents of a particular section every time the macro executes.  However, I want to leave the section itself in tact for new text.  Thanks!

Update Citations and Bibliography column width issue

Posted: 19 Jul 2014 09:11 PM PDT

Hi,

I keep having issues when updating my citation list. As you can see the Column Cells on the left tend to break. I have been manually realigning the column. This works temporarily, but once updated it goes back to the column breaks.

I have looked through all the settings, and have tried editing the table, but keep having the same problem.

Is there a way to customize the Citation Lists? 

Thank you

TOC using sequential numbers from heading style

Posted: 19 Jul 2014 08:24 PM PDT

Greetings,

Creating a songbook. All the songs have headings; the headings have a defined style, which includes sequential numbering. I want the TOC to show me the name of the song and its number in the sequence; the page number is irrelevant in this situation as there is more than one song on a page (and the pages really aren't numbered). Is there a way to create a TOC from this heading style that will use the heading number and ignore the page number?

Thanks

Word 2013 cannot open or save a .doc file

Posted: 19 Jul 2014 08:18 PM PDT

HELP! All of a sudden, my Word 2013, running in Windows 7, is unable to open an existing document or save a new document in .doc format. If I try to open an existing .DOC document, I get the dialog box:

<filename> is locked for editing by 'another user'. Do you want to:

 open a read only copy

 create a local copy and merge your changes later

 receive notification when the original copy is available.

No matter which option I choose, I get the message "Word experienced an error trying to open the file. Try these suggestions..." Note these are not shared documents and are stored on my workstation.

If I create a new document and try to save it as a .doc file, I get the message:

The save failed due to out of memory or disk space.

I CAN open and save files as .DOCX.

I appear to be having similar problems opening or saving Excel spreadsheets in .XLS format.

Until three days ago, everything was fine. No new apps have been installed. Does anyone have an idea how to fix this problem (and what might have caused it)? Thanks for your suggestions.

Embedded Excel chart is skewed in Microsoft Word 10

Posted: 19 Jul 2014 07:39 PM PDT

Hi, I have inserted an Excel chart using Past Special - Microsoft Excel Binary Worksheet Object into Word10 and only part of the chart is displayed.  When I double click the chart in Word, the entire copied area is shown, however when I go back to the doc, only part of the chart is shown.  Part of the chart is cut out and not displayed at all.  

The same goes with existing document that already has an embedded Excel chart.  When the doc open for the first time, the chart would be displayed correctly.  However if I click on the chart, and then click back out, part of the chart will be cut out and not displayed.  There's no way I can get it to go back to the original state to show everything afterwards.

This is very frustrating and I am almost to the point of abandoning Excel and just type the data in a table in Word and manually do the calculations.  

Please Help

HP computer word 2007 Not able to put insertion point in a document if there is text, pics, etc. already in it.

Posted: 19 Jul 2014 05:57 PM PDT

I am trying to learn Word 2007 & I have an HP Computer. I am taking online classes & I am not able to put the insertion point where I want it in a document. The Schooling People are not any help. How do I fix this?

Got message that Merriam-Webster Dictionary App is being discontinued

Posted: 19 Jul 2014 05:50 PM PDT

I clicked on "define" in Word 2013 to bring up my Merriam-Webster Dictionary app, and got the message: this app is being retired soon. Does anyone know if there's a replacement?

Word "Recovers" Files by Reverting to Older Versions - Complete Disaster - Can't save anything

Posted: 19 Jul 2014 04:16 PM PDT

Word keeps reverting back to older versions of my files, telling me that it has "recovered" them.  There have been no crashes of Windows or of MS Word.  Still it does this _EVERY_ time I re-open an existing file.  I only had one file that I wanted to work on when I started.  This developed into numerous "recovered" files presented in a list which makes no distinction between any of them.  They all had the same name.  So every time I opened Word, I was confronted with a list of papers that all had the same name.  If I click on any of them I am shown an old document to which I had subsequently made numerous changes over a period of time - changes which are not present.  It then asks me whether I want to save the changes that I made - EVEN when I have made no changes, but have simply opened the document to see which one it is.  Since it started doing this repeatedly, I copied and pasted the contents of the document into a new file so that I could at least tell the more recent "recoveries" from the older ones.  This didn't stop the "recovery" behavior, however.

Once I have a document open, I can see a list of documents with different dates/times (spread out over a couple weeks).  I have opened up every single one and they are all identical.


I just paid for this program (much to my regret) before starting to use it to work on this very document and it this is the ONLY behavior that I have witnessed it perform.

Microsoft CRM - Doubt about uninstalling CRM leaving data intact

Microsoft CRM - Doubt about uninstalling CRM leaving data intact


Doubt about uninstalling CRM leaving data intact

Posted: 15 Mar 2005 02:09 PM PST

Hi Matt ...

I already do that like a thousand times and it didn't work ... I saw a case
like this but they say they only restarted exchange and worked ok ... i
already do that too and it didn't worked ..

Any suggestions about something else i can try so i don't need uninstall CRM ?

I really appreciate your help !!!




"Matt Parks" wrote:
 

Quote Template Question

Posted: 15 Mar 2005 10:55 AM PST

Got a reply back from Ternek Christian to change the return above the table
to 1 pt. Also ensured the paragraph formatting was 0/0 paragraph spacing and
single line spacing on both.

I also changed the one after the product table. Looks fine in Print Layout
with what appears to be a 1 pt gap, BUTwhen I view it in Print Preview or
print it, the first product and the Title row are 1 point joined, but the
other products again have a bigger gap! So what do I do now?

Any suggestions would be helpful as we really want to use this feature to
print out our quotes, without resorting to a third-party product at this time.

Thanks so much!
Shauna

"Shauna Koppang" wrote:
 

Create activity by workflow

Posted: 15 Mar 2005 04:21 AM PST

Using slugs like this is very picky. The syntax needs to be absolutely
correct, and it is often case senstive. The table names and field names
should be taken from schema manager, not SQL server. You can also check the
field names by looking at the customise form view of the object in question
under the schema tab.

HTTH

Gill

"Peter Lynch" wrote:
 

addressnumber

Posted: 15 Mar 2005 02:31 AM PST

in the internaladdressbase, there is "telephone1" field, which in the form it
is called main phone.
If I'm not mistaken, there is only one main phone in the form, and there is
no more addresses in the user form. So where do these other main phone is
appear?
Hope you understand my english. Thanks for all of the replies

"Matt Parks" wrote:
 

simple question

Posted: 15 Mar 2005 12:43 AM PST

You can remove the license from the user prior to deactivating the user.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Tue, 15 Mar 2005 10:59:46 +0100, "Seidl Michael" <at> wrote:

first thanx for your help!

i can delete or deactivate this user in AD, but my my license ist lost!

That can not be! Is Microsoft stupid!

I only want the license back from my not needed user!


"Michael Erl" <de> schrieb im Newsbeitrag
news:Oe%phx.gbl... 


Chat with a MSFT expert about CRM performance, Mar 15-17, HERE!

Posted: 14 Mar 2005 01:51 PM PST

The problem for us with regard to pinpointing the issue is that we can
"predict" it. It happens after a couple of days. Also other web applications
on the server do not have any problems which makes us suspect SQL but we
cannot see any processor usage above normal (10-15%).

w3wp.exe takes up about 450MB RAM.

The other bizarre thing that often happens with this issue is that sometimes
we can "read" (view records) but if we try to save the record after making a
change the system will hang and then we have to restart SQL to get it to
work again.

There are about 35 users. CRM Server has 2GB RAM, on a dual proc server.
(Zeon - not sure of exact speed right now)

SQL is running 2GB RAM on a single processor box. But we are upgrading that
this weekend.

Sean
"Terry Eminhizer [MSFT]" <Terry Eminhizer [MSFT]@discussions.microsoft.com>
wrote in message news:com... 


API usage outside CRM????

Posted: 14 Mar 2005 09:05 AM PST

Thanks Matt!!!

"Matt Parks" wrote:
 

License problem

Posted: 14 Mar 2005 08:47 AM PST

You need to restore the database.

"Dimitri" wrote:
 

Question about MS CRM Exchange E-mail Router?

Posted: 14 Mar 2005 07:27 AM PST

If you uninstall the router from the Exchange server, then you won't have any
problems.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Mon, 14 Mar 2005 13:26:43 -0600, "Mervin Williams"
<net> wrote:

I'm sorry for mistyping, but my question really concerns whether I will
incur any problems with components of E-mail Router remaining on my
production Exchange instance after uninstalling MS CRM and the Email Router?

Mervin Williams


----------------------------------------------------------------------------------------------
"Matt Parks" <com> wrote in message
news:com... 


Mass email to contacts

Posted: 14 Mar 2005 07:17 AM PST

Do you have tried the Advanced Find...?

"Guidho" wrote:
 

CRM Mobile database log files growth

Posted: 13 Mar 2005 09:21 PM PST

Hi brett,
John is right. you need to backup your database.


"brett" wrote:
 

SFO sync - Limit attachments option doesn't!

Posted: 13 Mar 2005 12:06 PM PST

And you're probably hitting the nail on the head.

As for the sync times - try 21 hours for the first sync! (according to
the users)

I've forwarded this info onto colleagues who are slightly more aux fait
than myself.




Paul Reitmeyer wrote: 

MSCRM Addons?

Posted: 13 Mar 2005 11:22 AM PST

www.mscrmexperts.com


"Max" <ru> wrote in message
news:googlegroups.com... 


How to change the definition of fields?

Posted: 12 Mar 2005 09:07 PM PST

Thanks to Michael, Matt Parks and Paul,

It's painful to make a decision. Maybe I prefer to give up this attributes
problems. Just establish a new table and design a new webpage to do the
customization.



"Michael Erl" wrote:
 

Projectoriented features

Posted: 12 Mar 2005 02:31 PM PST

I have not seen anything that wouldindicate anything to help with project
oriented tasks like this in the CRM 2005 release.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Sun, 13 Mar 2005 03:59:02 -0800, "Hans I. letnes"
<microsoft.com> wrote:

Thanks Matt I'll suggest this solution for the customer. Will there be
improvements in projectorientered features in the next version of Microsoft
CRM?

"MattNC" wrote:
 

How to add custom field - clarification

Posted: 11 Mar 2005 05:29 PM PST

Alright, I'll look into the Redeployment tool from MBS.
Thank you very much for the help MattNC, I appreciate it!
-Sean


"MattNC" wrote:
 

setup failed

Posted: 11 Mar 2005 03:36 PM PST

Lisa,

Is this user the same user that you installed the operating system or SQL
with? If so not a good idea, make a new user with domain rights and log on
as that new user for the install.

Apart from that I think Paul was right in suggesting the AD in Native mode.
You can find this, START - Programs - Admin Tools - Active Directory Domain
and Trusts.
To check right click your domain and select properties.
To change right click your domain and select "Raise Domain Functional Level"
Then select native mode.

We have done several installs including our setup with SQL DNS CRM Exchange
AD, the lot and have had minimal to no issues. Have been running for a while
now without any problems. Not ruling out the timout factor as if you dont
have sufficient hardware this could also be the case.
What hardware are you running?

Good Luck!

Regards,
Nathan


"John O'Donnell" wrote:
 

CRM v1.2 Report Manager Problem

Posted: 11 Mar 2005 05:24 AM PST

Hi John,

Nop, I only have a copy of Crystal Report 8.5 and naively installed
that alongside CRM Server and hence having this problem now... still
having exactly the same problem here...



John O'Donnell wrote: 
the 
CRM 
reports 
to 
CRM 
square 

export problems for Excel

Posted: 11 Mar 2005 01:07 AM PST

chekc the regional settings for the comouters that are failing

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"Basman" <com> wrote in message
news:google.com... 


does a responses per hour by CSR report exist?

Posted: 10 Mar 2005 12:51 PM PST

It is produced by an ISV called Visionary Software - it is listed on the ISV
Vendors list that Microsoft maintained, so they have passed the certification
test. The website on the card they gave out is www.vscrm.com.

And yes , there is a download if you use AWC. And the cost is mostly per
seat based - details on the site.

Good Luck!


"Erik W" wrote: