Pages

Search

Microsoft Word - Problem printing tables, text wrapping

Microsoft Word - Problem printing tables, text wrapping

Problem printing tables, text wrapping

Posted: 10 May 2013 07:25 AM PDT

(Sorry for this convoluted explanation of the problem I'm having, but this is the clearest I could explain it! If there's a way for me to upload this document somewhere for people to review, I can do that. Thanks!)

One of my co-workers is trying to print a document she created on Word 2010. The document contains several separate tables, some of which spread across the page horizontally and others that take up part of the page vertically. There are also a couple of text boxes on the page. Here's a diagram of what the page looks like (T= Table, B=text Box, Letters in BOLD are where the problems are)

TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT

TTTTTTTT        BBBBBBBBBBBBBBBBBBBBB
TTTTTTTT        BBBBBBBBBBBBBBBBBBBBB
TTTTTTTT        BBBBBBBBBBBBBBBBBBBBB
TTTTTTTT   
TTTTTTTT       TTTTTTTTTTTTTTTTTTTTT
TTTTTTTT       TTTTTTTTTTTTTTTTTTTTTTTT
TTTTTTTT       TTTTTTTTTTTTTTTTTTTTTTTT
TTTTTTTT     
TTTTTTTT       TTTTTTTTTTTTTTTTTTTTT
TTTTTTTT       TTTTTTTTTTTTTTTTTTTTT
TTTTTTTT       TTTTTTTTTTTTTTTTTTTTT
TTTTTTTT       TTTTTTTTTTTTTTTTTTTTT

BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB

The text in Bold does not print. I believe what is happening is that, when I send the page to print, the text is somehow being moved about a line down within the table, hiding it from view. (If I make the fonts larger, I can see the very top of the text on the bottom of each cell, or if I make the text a superscript, it raises the fonts enough so it's visible when I print.) Please note that when I print the file to a PDF, I get the same result, so I'm fairly confident the problem is not with the printer.

I found a solution, but that caused a formatting problem. If I turn the text wrapping option to None, the text prints. The problem with this solution is that if I turn the text wrap off for the table on the far left, it will not let me place any of the tables or the text box to the right of it (it shifts them to the next page.) On the other hand, if I turn the text wrap off for the tables on the right hand side but leave text wrapping on for the table on the left, formatting is fine, and everything prints except for the text in the table on the left.

Any suggestions??? This is driving me bonkers!!

Constructing custom bullets

Posted: 09 May 2013 05:56 PM PDT

In Word 2000, one had the ability to specify the amount (in inches, etc.) of the indents, both for the bullet and for the text that followed immediately.

 

In Word 2010, there is a bullet menu on the Home tab, but the drop-down menu does not contain a means for customizing the bullet/text placement.  This capability must certainly still exist, except that I have not been clever enough to find it!

 

Gordon

Houston, TX

How to replace all bold phrases with the same phrase with ** before and after?

Posted: 09 May 2013 12:32 PM PDT

Hi,

I'm creating a Wikidot (wiki platform) website and when you create a new Page and paste in text it loses all Bold and Italics. You then have to go back and put ** before and after every part of the text that had been Bold.

I want to use Replace in Word prior to copying and pasting to find the bold phrases and then replace them with the same phrase, but with the ** before and ** after the phrase, rather than manually do it.

Title title title

becomes

**Title title title**

Does anyone know how this could be done?

thanks!!!!

Unwanted automatic text deletion

Posted: 09 May 2013 11:52 AM PDT

When I try to add text to an existing document the existing text is being automatically deleted.  How can I stop that from happening?  There is nothing unusual about the document, The format is Normaland it still happens if I clear formatting.

Why text boundaries changed in 2013

Posted: 09 May 2013 10:02 AM PDT

Hiya Fellas,

I've a question to do about the new Word version.

Why, when I work with a 97-2003 .doc document of Word, It shows it normally, like the next picture.


But... When I want to work with a 2007-2013 .docx document, appears this:



It doesn't happened with the older versions, just with this 2013. You could try, and tell me if I'm lying.

If wanna activate these text boundaries, must go to File > Options > Advanced > Show Document Content > check "Show text boundaries".

Try pressing "enter" in the document, and you will see the same like in the above image.

Can you tell me what is wrong here?

Thank you.

System update updates microsoft windows

Posted: 09 May 2013 07:50 AM PDT

cannot get my  windows word 2010 to open. keeps referring me troubleshooter with no effect after running the troubleshooter

Office 2013 (Windows 7) has worked well for several weeks, but not will not start up any programs?

Posted: 08 May 2013 03:51 PM PDT

Office 2013 Professional Plus (32 bit version) has been working well since clean installation approximately 2 weeks ago on a Windows 7 Professional 64 bit OS.  Today when I tried to open any Office applications nothing happens.  I have attempted both quick and online repairs, both of which fail.  Also tried to start individual applications in Safe mode, and then the OS in safe mode again no response.  I have also tried a clean boot, and this also had no effect.

Windows updates are fully up to date, up to a single Defender update as of 7th May 2013.

Any help would be greatly appreciated.

Thanks

configration progress

Posted: 08 May 2013 03:07 PM PDT

every time I start Word 2007 the progran goes through "configration Progress" to start. I have reinstalled Word a couple of times, but I still get the "Progress"!

MS WORD Print Layout - How to change appearance of background screen either side of the white page of text in WORD 2003 & WORD 2013

Posted: 08 May 2013 04:01 AM PDT

I have two computers, one is PC bought 2003, WinXP WORD 2003, other is Laptop 2013, Win8, WORD 2013.

 

My Question is :-

 

When using WORD I prefer using the View Print Layout/Reading Layout which shows my work against a screen background, how can I change the appearance of the background colour?

 

On my PC (WORD2003) some ~ 8 years ago I managed somehow but now can't remember how ? to change it to grey and would like to now change the colour again and would also like to change the Laptop (WORD2013) in a similar way so both computers have the same appearance.

 

I have seen many help items for changing the page colour, but this is not what I am asking - it is the appearance of the screen background colour outside the actual Word document which I would like to modify.

 

The Laptop Word document currently appears as a white page surrounded by white background and is like working in a snow drift and not very easy on the eyes.

 

A step by step technical know how of how to adjust the Word 2003/2013 set up would be much appreciated.

 

My first question ever online ends: thankyou anyone who can help with this !

my e mail account don't work 'arf sharp and office97w'ont run - Microsoft Office forums

my e mail account don't work 'arf sharp and office97w'ont run - Microsoft Office forums

my e mail account don't work 'arf sharp and office97w'ont run

Posted: 07 Aug 2004 09:03 PM PDT

See here or OE help
http://insideoe.tomsterdam.com/
or ask in an OE news group

"flyer.co.uk" <microsoft.com> wrote in
message news:20c101c47cfc$a2ca3460$gbl... 

Office Update aborts while searching for available updates

Posted: 07 Aug 2004 11:09 AM PDT

Piotr and Michael--

You can get the downoads from here. I'm not sure but I think this issue is
going to be fixed with MSI 3.0 available in Windows XP SP2 when it RTMs to
the web around and about August 25 via Windows Update. Meanwhile, you can
access the updates directly and easily from here:

Downloads for Office 2003:

http://office.microsoft.com/officeupdate/downloads.aspx?CategoryID=CD010224941033&CTT=4&Ori gin=ES790020041033



Best,

Chad Harris
__________________________________________________ ______
"piotr" <microsoft.com> wrote in message
news:com...

Exactly the same problem. I have office 2003 installed over XP. Goes up to
40% and the same message. Any suggestions?

Office 2003 SP1 MUI avaible ?

Posted: 06 Aug 2004 12:19 PM PDT

The MUI SP1 updates should be publicly available this month.

Sloan Crayton
Microsoft

"udo" <de> wrote in message
news:phx.gbl... 

The "From" line in e-mail

Posted: 05 Aug 2004 02:55 PM PDT

You'll need to change it in the properties for the email account that you're
sending with.

--
Sue Mosher, Outlook MVP
Author of
Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
http://www.outlookcode.com/jumpstart.aspx


"brian" <net> wrote in message
news:100a01c47b36$f0f4c500$gbl... 

Multiple VLK's and a single installation point?

Posted: 05 Aug 2004 02:52 PM PDT

That mostly makes sense to me. However, I don't think that I fully
understand.

If we maintain paper records for each computer, and say purchase 200
licenses under one VLK, and purchase another 50 under another VLK, Must I
create two installations, one for the 200 licenses, and one for the 50? Or
can I maintain a single installation, with a single VLK, and install it on
all 250 machines?

Richard

"Milly Staples [MVP - Outlook]" <org>
wrote in message news:phx.gbl... 
carefully 

Updating OffXP on the server

Posted: 05 Aug 2004 06:39 AM PDT

Hahaha, no i specified the variables

msiexec /a X:\Office XP Pro\Pro.msi /p C:\kb832671\i forget the name.msp
SHORTFILENAMES=TRUE

I'm not looking at it now so I don't remember the msp file, but thats' the
command.

Now I'm doing this on win2k, but that shouldn't matter right? I mean the
msiexec command works the same on 2000 or XP...the only thing i can think
and i'll try changing it, the name i used for the folder office is installed
to, I'll rename it to something in 8.3 format..

Thanks

"Roady [MVP]" <_SPAM_net> wrote in
message news:%23Q6Hu7$phx.gbl... 
string? 
http://support.microsoft.com/default.aspx?scid=kb;en-us;832671&Product=offxp 
SHORTFILENAMES=TRUE 

2003 Pro Upgrade

Posted: 04 Aug 2004 12:24 PM PDT

> "Charles Weaver" <microsoft.com> wrote in 

1) You cannot upgrade products of the same version line - it is not
supported.

2) Why do you need the key? You don't have to install the qualifying
product, merely insert it when prompted.


--
My great-grandfather was born and raised in Elgin - did he eventually
lose his marbles?

Office 2003 SP1 Update gets HotFix error

Posted: 04 Aug 2004 05:49 AM PDT

Typically this step addresses that problem, too (they have the same cause).
See the KB article at
http://support.microsoft.com/default.aspx?scid=kb;en-us;304498 for other
potential causes of Office Update detection failures.

Sloan Crayton
Microsoft

"StuE" <microsoft.com> wrote in message
news:com... 

can't reinstall office xp pro after deleting from windows xp syste

Posted: 02 Aug 2004 04:39 PM PDT

Hello Danna,

The log file information stated you tried installing Office XP SP-2.
Instead you need to install SP-1 first for Office XP. But, you mentioned
that you have deleted the Office installation files already. At this
point, you may try this. Please note that the method involves editing the
registry; so make sure to back up the registry.

1) Back-up your registry 322755 HOW TO: Backup, Edit, and Restore the
Registry in Windows 2000
<http://support.microsoft.com/?id=322755>

2. Strart registry editor and delete the following key:

HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Prod ucts\9040820900063D11C8EF0
0054038389C

3. Delete this key and all of its subkeys:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\10.0

4. Under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Installer\Folde
rs, delete the key with the information: 9040820900063D11C8EF00054038389C

5. Delete the key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Uninstall\{9028
0409-6000-11D3-8CFE-0050048383C9}

6. After a reboot, try to install Office XP; then run office update using
the link: http://office.microsoft.com/officeupdate

Please try the suggestions and let me know the status.

Regards,
Jagadeesh.P
Microsoft.

xwindows help - Forums Linux

xwindows help - Forums Linux

xwindows help

Posted: 15 Jul 2004 10:09 PM PDT

"DanB" <net> wrote in
news:2qJJc.8616$gnilink.net:
 

ATI has good video drivers for linux. Go to www.ati.com and then download the
linux drivers and install them. I get this error too with my nvidia card when
I update the kernel and forget to reinstall the video drivers for it. You
have to install the 3D video drivers for your card and when you update the
kernel, reinstall them as they are kernel version dependant. It is not a big
deal and is a quick and painless process.

--
My email address is invalid, thanks to
all of these rotten spambots.
Email me by assembling this address:
tinykitty "ay tea" ohmster "dee oh tea" com
~Ohmster

Create a new Enterprise Project Microsoft Project

Create a new Enterprise Project Microsoft Project

Create a new Enterprise Project

Posted: 15 Jul 2004 10:40 PM PDT

Hi Dave,

This sounds like a developer-type question to me. Try posting on the
developer newsgroup. Please see FAQ Item: 24. Project Newsgroups. FAQs,
companion products and other useful Project information can be seen at this
web address: http://www.mvps.org/project/.

Mike Glen
Project MVP

davegrr wrote: 

Gantt Bar Sizes

Posted: 15 Jul 2004 03:00 PM PDT

Hi Brian,

Welcome to this Microsoft Project newsgroup :-)

Bar Styles give the option of 6 shapes, 10 patterns and 16 colours gives 960
combinations, and there aren't any more :(

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP

Brian wrote: 

Project duration and dates

Posted: 15 Jul 2004 01:05 PM PDT

It sounds like you're confusing hours of work with hours of duration.

The duration is the amount of (working) time between when the task begins
and when it ends. If we work a normal default work schedule of an 8 hour
workday (that's how Project knows what minutes out of the day count as
working time) a task that starts Monday at 8am and is finished Friday at 5pm
is 40 hours of duration by definition, period, end of story, and it CAN'T be
anything else. So if you say a task has a *duration* of 24 hours and starts
Mon at 8, it simply must end Wednesday at 5, there is no other option. You
cannot say a task starts Mon at 8, ends Fri at 5, and has 20 hours duration
UNLESS the workday itself is defined at 4 hours per day.

Work is the number of man-hours the resource is actually doing something
during that duration time period. The ratio of the two is the resource
allocation percentage of the resource assignment. If I say I have a task
budgeted for 20 hours, I'm usually thinking of man-hours of work. I could
do that work over a 20, 40, 60, 217, or whatever hour duration. (I can't do
it over LESS than 20 hours duration unless I get someone else to work with
me because I can't be two places at once.) If I do 20 hours of work over a
20 hour duration I'm working 100%. If I do it over a 60 hour duration I'm
working at 33% allocation, and so forth.

Fixed dates are a major issue because all too often those dates have been
determined without any regard to whether they are realistic or do-able. The
notion behind ALL project scheduling software, not just MS Project, is that
you are using the tool to develop a model of the project in order to
determine what dates things should be scheduled for so as to meet the
overall business objectives. When you start the process you know that you'll
be able to start as of a certain date (or can assume one), perhaps you know
you need to finish by a particular deadline, and you know what you need to
get accomplished and who's available to do it. But you *don't* have a clue
what dates all the tasks should be scheduled for - figuring all that detail
out is why you're using the software in the first place. Even specifying
start and finish dates when you enter tasks into the Gantt chart table
doesn't really give you truly fixed dates. Entering a start date gives a
Start No Earlier Then constraint while entering a finish date gives a Finish
No Earlier Than constraint. There can only be one constraint so which you
get will be determined by whether you specify the start of the finish date
first - the last one entered will govern. But that's not to say the tasks
won't get moved LATER in the plan if a predecessor link or resource
unavailability or conflict drives them later.

Here's a possible solution, workable if you're very careful. Set the
default task type to fixed units and enter your tasks. You should never,
ever, input start and finish dates except for those few tasks where a
constraint is actually required by the nature of the task itself but if you
really have no choice in the matter, when you set those dates the duration
they represent will be calculated. I'd actually do it in the order finish
date then start date because a SNET constraint makes more sense than a FNET
constraint if you have to have one at all. The duration between those two
dates is fixed and that's not something you can control, period. Now enter
your resources in the resource list. Back to the Gantt chart. Split the
screen (Window Split) and use the Task Form in the bottom window to assign
your resources. For each task in turn, first switch the task type to fixed
duration, click ok, then in the resources section enter the resource name,
leave the percentage blank, and enter the number of hours budgeted for that
task. When you click ok, the resource(s) will be assigned at whatever
percentage produces the budgeted hours of work over the duration represented
by the start and end dates you've specified. If any resource gets allocated
at over 100% you've now got a political problem to solve because it means
that the boss who gave you those fixed dates is requiring people to do more
work in a workday than is humanly possible to do and something has got to
give or the project is virtually guaranteed to fail.

Hope this helps, let us know how it goes...

--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



"Lisa" <microsoft.com> wrote in message
news:com... 
can't figure out how to allot resources so that neither the amount of hours
at which I've sent the duration nor the dates move.

How difficult is Project Server to Implement?

Posted: 15 Jul 2004 12:27 PM PDT

I agree. The tool is just part of the problem. Defining and getting
agreement on a standard process and training the users is quite an effort in
a large group.

-Jack

"Rob Schneider" <net.net> wrote in message
news:phx.gbl... 

How are percentages calculated?

Posted: 15 Jul 2004 12:12 PM PDT

The best thing to do is look in Help, and ask the question "how is
percent complete computed" and you'll see the article "Percentage and
number fields" and there you can see how these fields are computed.

Hope this is useful to you. Let us know.

rms




JeremyE wrote: 

Linking tasks into master project

Posted: 15 Jul 2004 12:07 PM PDT

Hi Robin,

If you expand the sub-project files within the master, you can link tasks in
the normal way: eg select the 2 tasks an click the Link tool.

Mike Glen
Project MVP



Robin wrote: 

build customized application for MS Project

Posted: 15 Jul 2004 06:40 AM PDT

You could also keep it simpler by using, if available in the company,
Outlook's Task Request process. Customers ask a request of the manager
who in turn delegates it out.

Project would be great if the tasks are true projects ... but if "just"
tasks, you might find the overhead/complexity is too much.

There are also some very nice open source products available for free
that do this sort of thing. Check out Source Forge et. al.

Hope this is useful to you. Let us know.

rms




aj wrote: 

Link Summary or not?

Posted: 15 Jul 2004 06:39 AM PDT

You might want to look for an article by Robert Cooper about Stage-Gate
processes (phases and gates) particularly the stuff he wrote about "Fuzzy"
gates...

some thoughts on lifecycles and phases....
This probably won't answer your question regarding linking of phase summary
task (though I recommend against it)
----
Turns out most companies have lifecycles with phases and gates - however
many gates are "90% there" (from an old Arnold Palmer quote about trees and
golfing).

Think about it, perhaps you have a deliverable of a specific tool made by an
outside vendor. That tool is complicated and will take 6 months to produce.
According to your lifecycle, that tool is not due until phase 3 - which is
typically 2 months long and should happen 4 months from now. Do you wait
until phase 3 to start work on the tool? Hell no! - you start thinking and
acting on that deliverable ASAP....

SO here a phase 3 deliverable is actually being worked on during phase 1 and
phase 2....

Mark
--
__________________________________________________ _______
Mark Durrenberger, PMP
Principal, Oak Associates, Inc, www.oakinc.com
"Advancing the Theory and Practice of Project Management"
__________________________________________________ ______

The nicest thing about NOT planning is that failure
comes as a complete surprise and is not preceded by
a period of worry and depression.

- Sir John Harvey-Jones
"maarkr" <microsoft.com> wrote in message
news:2d9c601c46a71$37f8fdd0$gbl... 

Can't remove program

Posted: 14 Jul 2004 08:47 PM PDT

Have some kind of corruption on primary HD as could not
reinstall, remove or change features when attempting to
reload Project, reinstalled MS project to different HD and
was able then to remove program. Thanks for your reponse.

Steve Brown 
Sounds like 
that the uninstaller 
Whenever I 
not 
bar 
and 
Since 

Printing in Microsoft Project 2002

Posted: 14 Jul 2004 05:26 PM PDT

Hi Catherine,

Welcome to this Microsoft Project newsgroup :)

You might like to have a look at my series of Microsoft Project lessons in
the TechTrax ezine, particularly Lesson 8 - Printing Reports and Views, at
this site: http://tinyurl.com/2xbhc (Perhaps you'd care to rate it before
leaving the site, :) Thanks.)

If that doesn't help, I would suspect corruption and you could try the
suggestions in FAQ Item: 43. File Bloat? - Might be Corruption.

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP

Catherine wrote: 

Website Project Plan

Posted: 14 Jul 2004 04:22 PM PDT

FYI, a project plan is a collection of documents. MS Project can be used for
the WBS, schedule, resource plans, effort and duration estimates (and other
documents) which are all PART OF the project plan.

You'll also need things like roles and responsibilities, project success
criteria, project justification, project charter ...

If I were to do a Web sit project plan these would be the hyperlinks I'd
consider:

Project Charter
One page scope document
WBS
Activity Effort estimates
Activity duration estimates
Resouce requirments/resource plans
Team members and roles
Risks and risk response plans
Communication plan (built on the list of key stakeholders)
Assumptions
Network logic diagram
performance measurement baseline (for earned value)

By building this web site, you will know more about your project than you
ever thought possible...
Mark

--
__________________________________________________ _______
Mark Durrenberger, PMP
Principal, Oak Associates, Inc, www.oakinc.com
"Advancing the Theory and Practice of Project Management"
__________________________________________________ ______

The nicest thing about NOT planning is that failure
comes as a complete surprise and is not preceded by
a period of worry and depression.

- Sir John Harvey-Jones
"Ann" <com> wrote in message
news:google.com... 

TO DO CRASHING FROM PROJECT

Posted: 14 Jul 2004 03:35 PM PDT

Start with the critical path(s). Do what you can to shorten it. Then when
the new critical path(s) emerge, shorten them and so on and so on...

Look at your plan and figure out what can be done in parallel but be aware
of the risks as you "parallelize" work

"We can start coding even though the design is not done however we risk
rework once the design is finished" are you willing to take that risk? What
is the risk/reward trade-off? (is the risk worth the reward?)

Best of luck...

Mark


--
__________________________________________________ _______
Mark Durrenberger, PMP
Principal, Oak Associates, Inc, www.oakinc.com
"Advancing the Theory and Practice of Project Management"
__________________________________________________ ______

The nicest thing about NOT planning is that failure
comes as a complete surprise and is not preceded by
a period of worry and depression.

- Sir John Harvey-Jones
"student" <microsoft.com> wrote in message
news:2d04b01c469f2$d49149b0$gbl... 

Printing only Working Days

Posted: 14 Jul 2004 11:47 AM PDT

Thanks Steve,

I figured this was the case, but I just wanted an expert
opinion on the matter. thanks for the assistance, and
keep up the great work.

Jason

 
cancelled because you 
message 
are 
sheets? 

Assignments not appearing in Project Server Task Timesheet

Posted: 14 Jul 2004 11:42 AM PDT

Diane --

Do you see errors in the application log on the server?

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
"We wrote the book on Project Server"


"Diane Skoll" <edu> wrote in message
news:2d89c01c46a5e$c09448b0$gbl... 

Open Office - [discuss] Problem Found !

Open Office - [discuss] Problem Found !

[discuss] Problem Found !

Posted: 12 Apr 2007 04:42 PM PDT

A suggestion as to what "Acess is denied" is most likely to mean, you
see that would be -better- not just -adequate-

-----

Chris Monahan

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Configuration Sets

Posted: 12 Apr 2007 01:34 PM PDT

--=-LiMKab3HBmPzQ2bly29b
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hei,
 

sorry, but i always thought that such a choice is big non-sense.

That is, offering an interface choice like MSO-like or OOo-Classic and
other configurations sure makes quite a bit of sense. But asking the
user if he's a power user, noob or avarage or whatever doesn't. Offering
functionality-wise scaled UI setups is a good thing though.

More particularly, such an option would have the benefit of enabling not
only scaled configurations, but specialized setups for certain tasks or
branches.

Andr=E9.


--=-LiMKab3HBmPzQ2bly29b
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQBGHsjyEOp8fsnyxsQRAqNyAKCT8dKIOO6dxD1j4qW7RB Mb5TFtbQCfckkx
hA1hdLICWUAz5qV1gFeFzO0=
=Zvcl
-----END PGP SIGNATURE-----

--=-LiMKab3HBmPzQ2bly29b--

[discuss] Opentype and Graphite font technologies support

Posted: 11 Apr 2007 10:34 AM PDT

Hmm ... could have sworn I'd put that link in:

http://www.linux.com/article.pl?sid=06/03/15/1649204


On Wed, 2007-11-04 at 10:39 -0700, Bruce Byfield wrote: 
--
Bruce Byfield 604-421-7177
Burnaby, BC, Canada
web: http://members.axion.net/~bbyfield
blog: http://brucebyfield.wordpress.com/


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

Multiple Font Issues Microsoft Office for Mac

Multiple Font Issues Microsoft Office for Mac

Multiple Font Issues

Posted: 16 Nov 2007 08:59 AM PST

Reinstalling Office is almost never the answer....

I'd post on an Apple group to see what the equivalent of trashing all
font caches is now--e.g., this page makes it clear safe boot in Leopard
behaves differently, but there should be a substitute:
http://docs.info.apple.com/article.html?artnum=107392

Uh, here's a Terminal based suggestion:
http://discussions.apple.com/thread.jspa?messageID=5818618&#5818618

Try at your own risk.

turnermarketing wrote: 

Leopard Upgrade triggered Office "test drive"

Posted: 15 Nov 2007 04:10 PM PST

On Nov 15, 4:35 pm, Diane Ross <entourage.mvps.org>
wrote: 

I followed the instructions in the Leopard booklet, pp 4-5. Inserted
disk, selected destination, clicked install. Machine restarted. I
will follow your recommendation and report back.
Many thanks,

New sneap peak for Entourage

Posted: 14 Nov 2007 07:31 PM PST

On 17/11/07 3:37 AM, in article
giganews.com, "Kurt"
<com> wrote:
 

Sounds like you too are waiting to see whether Microsoft has applied an
ounce of common sense to Test Drive 2008. The problems caused by Test Drive
2004 have been horrific. Not the way to have a warm and fuzzy initial
customer experience...

Clive
=====

updating license

Posted: 14 Nov 2007 12:04 AM PST

On Nov 14, 6:21 am, John McGhie <name> wrote: 

The program I bought is enough for 5 computers. It worked fine on my
old computer while two other people were using theirs on the same
network. For some reason now though, when I transferred all the
applications to my new computer and delted Office from my old
computer, my husband and I can't both run Office when we're on the
home network.
Subscribe to: Posts (Atom)