Pages

Search

Microsoft Word - Thesaurus in PT-BR for Office 2010 Home & Student running on Windows 8.1

Microsoft Word - Thesaurus in PT-BR for Office 2010 Home & Student running on Windows 8.1

Thesaurus in PT-BR for Office 2010 Home & Student running on Windows 8.1

Posted: 21 Jul 2014 02:17 PM PDT

Cara,

Estou precisando instalar um thesaurus em PT-BR no Office 2010 rodando no Win 8.1. Alguém pode me ajudar? Não achei em nenhum local dos sites da MS nem uma resposta e nem um arquivo que resolva essa questão.

Saudações e desde já, obrigado.

Dear,

I'm need to install Thesaurus PT-BR in Office 2010 Home & Student running on Win 8.1.   Not found solution in any location of the MS sites .


Best regards,

Linking Content Controls

Posted: 21 Jul 2014 01:03 PM PDT

I'm used to making forms using Adobe Acrobat, where if you give two form fields the same name, the information you enter into the first will autofill into the second (and any subsequest) fields of the same name. I'd like to duplicate this feature in the Word templates I'm creating, but I don't see an easy solution to accomplish it using content controls. Is there a feature I'm overlooking or a workaround that accomplishes the same thing?

Word 2013 Macro Not Work As Predicted

Posted: 21 Jul 2014 12:35 PM PDT

Sometimes I receive Word documents that have a layout other than the one I prefer. When such a document is open on my screen, I can put it into the format I prefer by clicking on the "One Page" button and then click on the "100%" button. When I record a macro following those same two steps, the result is not the same. The macro below causes the layout to go to a single page, but the Zoom is not 100%. What am I doing wrong? Is Word recording an incorrect command?

Sub OnePage100()
'
' OnePage100 Macro
'
    ActiveWindow.ActivePane.View.Zoom.PageFit = wdPageFitFullPage
    ActiveWindow.ActivePane.View.Zoom.Percentage = 100

End Sub

Error message when I try to open word 2013 documents saved on my c drive

Posted: 21 Jul 2014 11:51 AM PDT

I get the following error message when I attempt to open Word 2013 documents in my c / local drive: - "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item".

I can open all the files on the c drive that have been saved from Excel 2013.

Visual Basic not initialized

Posted: 21 Jul 2014 10:23 AM PDT

I am getting the following message when opening a rtf file in word

Same problem as case 1251652659 WORD says "searching for server" and never stops

Posted: 21 Jul 2014 10:18 AM PDT

Same problem as case 1251652659 WORD says "searching for server" and never stops searching...WORD will not launch

Trying to Get Chapter Titles in Header and Page Numbers - MIND NUMBING!!!

Posted: 21 Jul 2014 10:09 AM PDT

I have a big book. I want page numbers at the bottom of the page and "Chapter 1", "Chapter 2", etc. at the top. I have found this to be utterly impossible. I have been scouring the web for explanations and everything i have read does not work. Doing a Next Page Section Break screws up my page numbers, and even if it didn't do that, there are still problems with it. This seems like such a simple thing that should be able to be done almost automatically, why is it such a disaster?

DEFAULTING DOCUMENTS IN WORD TO HOME versus FILE

Posted: 21 Jul 2014 09:42 AM PDT

In Office 2013, how can I default my documents to  HOME as opposed to FILE in upper segment of documents?

Losing files and changing PDF to MS word 2013 open in picture formatting and won't let me edit.

Posted: 21 Jul 2014 09:39 AM PDT

   I've been fighting with MS word 2013 for a while, its losing files and won't let me save, without first asking with every doc. if I want to save even when I've not made any changes.  Lost a 10 page assignment,  I try try to recover and the file would not open it was a DSF file?  I called MS support and the tech said my doc. was gone and I needed to speak with a doc. recovery tech. I'm in summer classes and I DO not have time to leave this with the geek squad who didn't fix it the last time I had it in.

Today I'm trying to open a PDF in word 2013 so I can edit it and it opens under the picture format with an + for the curser, so now I can't edit it. 

What can I do to fix this program? I've repaired three times in the last 3 weeks.  I've check with the "fix it" took and I don't even think 'fix it" is for 2013. All I seen was 2010 and issue before then. 

I think this all started when I tried to share a video with a professor, so I've gotten it all messed up.  

I need a list to follow to try and get this program back to normal, at least until this class is over. 

How to generate a Notepad document from a Word 2013?

Posted: 21 Jul 2014 08:05 AM PDT

Hello Team

How can I generate a Notepad document from certain sections of a Word 2013 document?

Cannot add page numbers Word 2013 (office 365 small business)

Posted: 21 Jul 2014 08:03 AM PDT

Have tried to removing and re installing office, tried to repair office but I still cannot get page numbering to function. I know I can use field codes, but that is not what I expect and is not the way Word should function, What is the fix, Microsoft, not the workaround. I have wasted hours on this feature since all my work requires page numbers. but not on all the pages (the cover, for one). Most of the time, I manually enter the page numbers. On 50+ pages documents, this is tedious. Need this fixed ASAP.

 

an imbeded excel sheet can't be opened in word, it think it is a picture

Posted: 21 Jul 2014 07:59 AM PDT

I have inserted an excel spread sheet into my Word 2010 document. After closing the document and reopening, I have lost the excel functionality. It only allows me to edit as if it is an image and not a spreadsheet. Any help would be greatly appreciated.

On iPad how do I delete a page from an existing doc ?t

Posted: 21 Jul 2014 07:49 AM PDT

I can not figure out how to delete a page from an existing word doc on my iPad

Word 2013 freezes when you past a 38 digit number between double quotes

Posted: 21 Jul 2014 06:04 AM PDT

Hi,

When I paste the following number in an empty new word document, word freezes (reproduceable):

"16863484103375415255768374467839801554"

It seems the Word autocorrect functionality is causes this freeze. If you set "do not check spelling and grammar" as default, the problem does not occur. However, your gramar and spelling errors are not corrected.

Does anyone know a way to keep the Word grammar and spelling checker working and be able to use these large numbers in word document. By example by disabling certain autocorrection features?

Kind regards,

Norbert

remove

Posted: 21 Jul 2014 04:11 AM PDT

Can you  please provide the instruction as to how to delete my name from Location : C:\Users\Jeannette\Documents.

this is found when I send a document 

Daisy

thanks

Make a macro code for tracker change document highlight but "Run-time error 5852"

Posted: 21 Jul 2014 02:58 AM PDT

Dear

I have a tracker change document(total page is 79) which i want to highlight this via Macro code. the code will be listed below.

---------------------------------------------------------------------------------------------------------------------------

Sub HighLightTrackInsertions()

Dim oRev As Revision
Dim blTrack As Boolean
blTrack = ActiveDocument.TrackRevisions
ActiveDocument.TrackRevisions = True
For Each oRev In ActiveDocument.Range.Revisions
    If oRev.Type = wdRevisionInsert Then
       oRev.Range.HighlightColorIndex = wdGray50
    End If
Next
ActiveDocument.TrackRevisions = blTrack
End Sub
Sub HighLightTrackDeletions()
Dim oRev As Revision
Dim blTrack As Boolean
blTrack = ActiveDocument.TrackRevisions
ActiveDocument.TrackRevisions = True
For Each oRev In ActiveDocument.Range.Revisions
    If oRev.Type = wdRevisionDelete Then
       oRev.Range.HighlightColorIndex = wdGray50
    End If
Next
ActiveDocument.TrackRevisions = blTrack
End Sub
Sub Macro1()
'
' Macro1 Macro
'
'
End Sub
Sub Macro2()
'
' Macro2 Macro
'
'
    Application.Run MacroName:="HighLightTrackDeletions"
    Application.Run MacroName:="HighLightTrackInsertions"
End Sub

---------------------------------------------------------------------------------------------------------------------------------

When I run this macro, the result is "Run-time error 5852 requested object is not available."

the bug will be highlight on " If oRev.Type = wdRevisionInsert Then".

Could anyone solve this problem?

No Office 365 Program opens any files

Posted: 21 Jul 2014 02:46 AM PDT

Hello everyone,

For a while now I've been having the a problem and it is really getting to my nerves now: whenever I try to open a file with my Office 365 University version, no matter if it is Excel, Word, etc., it will start launching the program, showing the small blue/green/etc sign in the middle of the screen reading "starting", the sign then goes away, reappears and goes to the standard program starting screen offering to launch recent documents and standard document (such as blank). Neither offline nor online repair helped fix it (and i tried both several times) and the only way around it that I found was to drag the file into my browser and after "downloading" it opening it through the browser's downloaded file tab. When trying to open files any other way it just reloads the program and goes back to the starting screen with recent and standard documents. Did anyone have this problem too and knows how can I solve it if the online and offline repair does not work?

Thanks in advance for any help!

Jan

Edit: Also when using the browse window when saving it restarts the program and thus discards any changes without saving. Even with the "ways to work around problems" it keeps on screwing up...

University copyrighted materials with office clip art

Posted: 21 Jul 2014 02:15 AM PDT

Hi!

I am a teacher from a Hong Kong university. We are now preparing copyrighted teaching materials, and will distributed to primary schools in Hong Kongfor non commercial uses.

I have searched on the net. Can I simply used the clip art from Office, with "Used with permission from Microsoft" printed? (http://www.microsoft.com/en-us/legal/intellectualproperty/Permissions/default.aspx#ELC) Or, are there regulations or application procedures, specifically for university?

Thanks, Lucia

Microsoft Office 365 Applications Will Not Open

Posted: 21 Jul 2014 12:44 AM PDT

Hello everyone,

I have had this problem for over a month now, every time I click on an application from Office 365, which I downloaded about 11 months ago on to my DELL windows 8 laptop, the application doesn't start at all. I don't receive any messages of an error or anything, the app simply just doesn't open up. It's as if I never even clicked on it. it registers that I click on it, the hourglass icon pops up on the cursor, but a second later nothing happens.

I have tried the quick repair, and when I try the online repair tool it does its thing for about a minute, stops, then says there was an error.

I have no idea how to fix this, I think the package I bought came with two codes so I can reinstall the program again I think, but I don't know if that's a good idea. I don't want to pay another 80 dollars for an application that should be working smoothly only for it to do this again.

if anyone can solve this I would greatly appreciate it!!

Stop MS Office from Downloading Already Offline Files

Posted: 20 Jul 2014 10:35 PM PDT

I have 2 simple requests: Can somebody please show me how I can tell Office 2013 in a language it can understand this:

a) All my OneDrive documents are already available offline. Please read/open them from the filesystem; you don't have to download the document EVERY TIME! This makes me so very mad

b) I have OneDrive app to do the syncing. So, please cut it out with this Upload Center bull. Just save the documents to the file system (as we agreed) and let the sync engines do their work.

I feel bad that I will have to drop OneDrive/Office integration. It's not worth the pain. I'll just work with Dropbox and Copy.com for realtime syncs and use the OneDrive 1TB for storing movies :)

PS: I am running windows 8.1

Let me head over to the OneDrive page and look for the genius that thought that in this day and age, locking Windows 8.1 users to Microsoft accounts and OneDrive is a good idea.

Word 2013/O365 - Design Tab/Ribbon won't stop refreshing - link to video provided

Posted: 20 Jul 2014 07:28 PM PDT

Running Office 365 Pro Plus  (Word 2013)

Version 15.0.4631.1002

Simple example:

Open Word, new blank document

Type some text.  etc..

On the ribbon click on the "Design" tab.

Next to the Themes button on the far left side are little "boxes' that show a preview of what the theme looks like.  These little boxes won't stop refreshing.  I can't navigate any of the menus on this Ribbon section because the boxes wont stop refreshing.


Here is a URL to a screen capture video I took with SnagIt.  Its in a standard MP4 format.

It shows whats happening

https://www.dropbox.com/sh/m9w5lw1g2k2uxdj/AACZNv2cNGcMCwfk2ytiAJOQa

Why is this happening

Edit.  This is a fresh install of Windows-7 64bit with o365 (32 bit)  I already tried to "repair" office365 with no affect.

Calendar Wizard in Word2010

Posted: 20 Jul 2014 06:07 PM PDT

Suddenly, when I try to use the Calendar Creator in Word 2010, I'm not able to create a calendar.  Everything is fine until I click "Finish".  I then get the message "This method or property is not available because no text is selected."  This occurs when I attempt to create one month calendars and when I try to make multi-month calendars.  How can this be fixed?

Can't file search on Word

Posted: 20 Jul 2014 04:42 PM PDT

I can't do a file search on Microsoft Word.  The results are always blank, no file found.

Ubuntu problem - Forums Linux

Ubuntu problem - Forums Linux

Ubuntu problem

Posted: 27 Oct 2006 09:26 AM PDT

On Sat, 28 Oct 2006 00:54:04 +0000 (UTC), Ignoramus16855 <16855.invalid> wrote: 

It is now completely messed up, crashes with segfault trying to open
/dev/hda1.

I decided to forget this Ubuntu stuff like a bad dream and go back to
Fedora Core, which I run everywhere else. My son wants Fedora core
also (he is 5.5 yo and likes Fedora better).

i

Changing Motherboard and processor

Posted: 27 Oct 2006 08:17 AM PDT

Daniel James <aaisp.org> writes:
 

Stick in your new motherboard and new drivers and boot up. That is (
almost) iti, assuming that your processor, motherboard, are supported. FOr
example If you are changing over to a Commodore Pet motherboard and
processor, you are out of luck. Or even to an old non-PC Mac from a PC.

Places of potential "problems"-- video card, sound card. You should rerun
the video selection program and sound selection program.


 
This is why distros use modules NOT built in. They need to run on a huge
variety of hardware.

 

Which is why Gentoo demands that you build your own from scratch. Except
for a few situations, it is a silly procedure to follow.

 

I believe that this is nonesense.
 
 

dumb Ubuntu question #1

Posted: 27 Oct 2006 08:14 AM PDT

Michael DeBusk (net) wrote:

: > part a/ sometimes the app appears not to be 'compiled', if that's
: > the right word. How do I turn it into a file that my install
: > program can recognize.

: If you're talking about installing from source code, I'd recommend
: avoiding that for now. I've done it, and it can be a headache. Look for
: a package, especially a debian package (with the ".deb" extension), and
: install that. Red Hat packages (with the ".rpm" extension) can be
: converted with a program called "alien"; install that through Synaptic
: Package Manager.


well, the assumption there is that the package exists as a .deb or .rpm
(the latter can be problematic because it was not "packaged" for ubuntu).
A lot of software exists which is not in the official repositories at all
or they are not updated often enough. For example, Firefox 2.* was
released few days ago and it exists in ubuntu 6.10 but a week ago, you
could not readily get a .deb. You had to install from the web site.

anyway, most well-created packages will come in a ".tar.gz" which is
compressed .tar file. "tar -zxvf filename" will extract the files for
you. The first thing to look for is "INSTALL" or "README" and you will
probably see instructions about "./configure", "make" , etc. Do these
without a "sudo" . Then if everything goes well do "sudo make install
....".Instead of the last one you can try using "checkinstall" (sudo apt-get
checkinstall) .See http://asic-linux.com.mx/~izto/checkinstall/ . This
latter allows a nice uninstall method and I beleive it will let you get
dependencies automatically too.

This is fairly generic but not always true. other programs will have
their own instructions.

Windows Update Problem

Posted: 26 Oct 2006 06:15 PM PDT

On Fri, 27 Oct 2006 16:03:19 -0700, The Ghost In The Machine wrote:
 
<snip> 
Yes. There is a command called proxycfg.exe. I believe this is independant
of the control panel "internet" settings, also.

C:\> proxycfg 192.168.0.1:3128

Without this setting, Windows update spins its wheels, then fails without
indicating why. Typical.


--
Ripley: And you let him in.
http://us.imdb.com/title/tt0078748/quotes

New to Linux, need installation help

Posted: 25 Oct 2006 08:46 AM PDT

On Thu, 26 Oct 2006 22:05:31 -0700, Keith Keller <san-francisco.ca.us> wrote:
 

Funny, I thought it was Crap ;)

Grant.
--
http://bugsplatter.mine.nu/

ULTRA SLOW LINUX [PHP HTTPD]

Posted: 25 Oct 2006 08:32 AM PDT


co.uk wrote:
 

OK, let's start with the easy bits: *WHICH* Fedora Core Linux? There
have been 6 published.

Then, look at the web pages that are slow. Do flat text files there
appear much more quickly?

Then, if it's specific to those web pages, review the contents of the
web page. Add little debugging statements to publish timestamps as it
executes different stages.

Reconfiguring software RAID after disk names changed

Posted: 25 Oct 2006 08:30 AM PDT

Marek Zawadzki wrote: 

Use mdadm to set up the array again.

Is it possible to install Ubuntu on my Compaq?

Posted: 24 Oct 2006 10:23 PM PDT

In article <com>,
com says... 

And the default is to warn people not to use NO security, unless you
like a lot of unsecured spots all over the place, and when we teach
people about security we always tell them to NOT use WEP.
 

No, I've clearly stated that the default driver did not include WPA
ability, that it should include it, and that if they are going to
include WEP they should also include WPA, by default.
 

I could say the same about people that don't understand the human side
of computing, that don't understand security, that completely miss the
point of having a secure network/device.

--

com
remove 999 in order to email me

single home partition multiple linuxs?

Posted: 24 Oct 2006 04:26 PM PDT

Bit Twister wrote: 
Thanks for the input. I think I will stay with what I am doing. It kinda looks
like it is ok. When I started with Linux I was running Caldera and they only
asked for the swap and root partitions. I switched to Slack and just kept doing
the same. It works so maybe it is not so wrong.
Thanks again for your input.


--
Leo (Bing) Whiteway in Kelowna, BC, Canada: Ham calls: VE7UW and VE7OKV
A computer without Microsoft is like a chocolate cake without mustard.
< running Linux >

Adding packages to kubuntu - in particular, mozilla

Posted: 22 Oct 2006 03:47 PM PDT

> > Mike WN5PMROnly Kubuntu doesn't use synaptic - it comes with Adept. Start Adept 

Thanks much. Installing Adept to install Synaptic and then using
Synaptic to install packages worked damn well.

SD

Means of saving bash_history regularly

Posted: 22 Oct 2006 09:42 AM PDT

On 2006-10-22, Unruh wrote: 

man bash:

If the histappend shell option is enabled (see the description
of shopt under SHELL BUILTIN COMMANDS below), the lines are
appended to the history file, otherwise the history file is
overwritten. If HISTFILE is unset, or if the history file is
unwritable, the history is not saved.

--
Chris F.A. Johnson, author | <http://cfaj.freeshell.org>
Shell Scripting Recipes: | My code in this post, if any,
A Problem-Solution Approach | is released under the
2005, Apress | GNU General Public Licence

Knopix 5.0.1: Customising

Posted: 22 Oct 2006 09:04 AM PDT

Maurice Batey wrote: 
glad to have been of help Maurice. Enjoy.

Mike WN5PMR

vim - sed search/replace compatibility

Posted: 21 Oct 2006 01:02 PM PDT

> On Oct 23, 2:46 pm, Chris Cox <net> wrote: 
[...]truncated


Hay, I cant read that! (I'm getting old) Could you use some other char
other than '/' in that s///... like s!!! (or s,,, if you have history
problems)

ANYTHING but / is so much easier to read (without the \/s in there).

Even better to avoid command scripts to interactive commands and use a
tool designed for what you are trying to do. And ' can quote those
'\'s for you too, but then sed uses them (bummer).

My sed (GNU sed? on Fedora 5) has edit in place... how about yours?

SED(1) User Commands SED(1)
NAME
sed - stream editor for filtering and transforming text
[...]
-i[SUFFIX], --in-place[=SUFFIX]
edit files in place (makes backup if extension supplied)

.... a quick test
echo 'one \two/ three' > xx
sed -i.BAK 's!\\!/!' xx
diff xx.BAK xx
and I get
1c1
< one \two/ three
--- 

... I guess since you need to replace '\\' you will need '\\\\' and it gets
really ugly, so how about

nasty='/Documents/%20and/%20Settings/Tom/Desktop/Web/%20Pics/'

FS='/'
BS='\\\\'
worse="${nasty//$FS/$BS}" # This is a BASH-ism, dont try with ksh etc

sed -i "s!file:///C:$nasty!/pics/!" $1

.... ok, I don't know if it will work anymore...
Now I remember why I'm not a programmer anymore.

... Just ignore me. I do.

Linux version for dual booting?

Posted: 21 Oct 2006 07:58 AM PDT


***** charles wrote:
 

Yeah, laptops are the hardest systems for configuring. They tend to
have new graphics chipsets that no one in the Linux world has had the
time or energy to integrate new drivers for, and other strange
peripheral chipsets that can be very difficult to integrate. It's why I
prefer not to work with brand new laptops, but those that are about six
years old, so some other person has the opportunity to work out and
publish any difficult workarounds.

hibernating (S4?) with no swap

Posted: 20 Oct 2006 03:37 PM PDT

In article <uni-freiburg.de>,
LEE Sau Dan <uni-freiburg.de> wrote: 

FWIW, it unmounted all the filesystems (TYVM, swsusp) then aborted on 2.6.18.
 

Well, the main reason I would use suspend-to-disk is so it _wouldn't_
use battery.
 

Thanks. I'll look into suspend2. Any idea where I find that, or is
Google my friend here?

--
-eben nOetP royalty.no-ip.org:81
TAURUS: You will never find true happiness - what you gonna
do, cry about it? The stars predict tomorrow you'll wake up,
do a bunch of stuff and then go back to sleep. -- Weird Al

best distro to install on CF card?

Posted: 20 Oct 2006 08:51 AM PDT

On Sat, 21 Oct 2006 09:44:07 +0000, Peter Lynch wrote:
 

How much RAM do you have currently in the box? You don't need much, if
all you're going to do is run a very limited -- no X, shell only -- task
specific system. Something like that would only require a few megs of RAM
for the system ram disk. And by a few, I mean 4 megs or so.

I have a little floppy "rescue" system that loads a fairly complete system
(shell only) on a 4 meg ramdisk, but only uses 2.6 megs of it, leaving
ample room for logs, temporary files, etc.

Stef

accessing the simplest grub prompt when booting from HD

Posted: 19 Oct 2006 05:05 AM PDT

On Wed, 25 Oct 2006 15:42:15 -0700, neuneudr wrote:
 
The boot loader is a fundamental concept of operating systems. The
function that the loader provides may go unnoticed, especially if your
computer arrived with the OS preinstalled, and the boot loader is
functioning correctly. Even when you first install GNU/Linux, you may not
have noticed that the loader was changed. That is because a lot of the new
setup programs hide complexities from the end user in the name of
"user-friendliness." IMO, they may not be doing you any favors. It is
better to understand this concept from the start. That way, if you
"break" the loader, you'll be in a better position to understand what
needs to be done to fix it. The idea behind the loader isn't really that
hard to understand. Take a few minutes to read the documentation. This
looks like a good overview which supplements the official documentation:
http://en.wikipedia.org/wiki/GRand_Unified_Bootloader

Back to your original question...
This screenshot shows the grub boot menu:
http://www.xmission.com/~ddmayne2/10.2-live/screenshots/ss01.2006-07-23.png

If your grub loader is installed correctly, then it should display
something similar for you. Notice the bottom of the screenshot which
states:

"...Press Enter to boot the selected OS, 'e' to edit the commands before
booting, or 'c' for a command-line."

Pressing 'c' will give direct access to the grub shell and its pre-boot
environment. That may be what your original question was driving at.

Also, when the loader cannot find its menu (because it absent), the
default action is to go directly to the grub shell at boot:

grub>

--
Douglas Mayne

setup network problem

Posted: 18 Oct 2006 08:29 PM PDT

On Thu, 19 Oct 2006 20:10:28 -0500, net wrote:
 
Interesting unable to find my dvd I downloaded a new set of isos blew
them to CDs and tried again to reinstall. Everything worked no nic
problem and audio now works. It found all things that it should have.
I tried this again because of the other person(thank you) saying that
lspci should show the nic even thru it was on the motherboard. I had
tried reinstalling from the dvd before but this did not help. I found
the dvd later and booted and had it check the dvd , it said it was
fine. In retrospect I am glad this happened(my problem), I believed I
learned more in a couple of weeks than I have learned in a long time
just using linux.

simple Q again

Posted: 18 Oct 2006 01:41 PM PDT

On 18 Oct 2006, in the Usenet newsgroup comp.os.linux.setup, in article
<googlegroups.com>, Swingingming wrote:
 

I suspect that is a typo - should be a '.tgz' file, which is a tarball
compressed with gzip.
 

Find a command line, and run the command

tar -ztf /path/to/name.of.tgz

making the obvious corrections. Look at the file names it is reporting.
Do they begin with a directory name

[compton ~]$ tar -ztf downloads/arping-2.01.tgz | column
arping-2.01/ arping-2.01/openbsd.h
arping-2.01/Makefile arping-2.01/solaris.h
arping-2.01/LICENSE arping-2.01/arping-2/
arping-2.01/arping.8 arping-2.01/arping-2/install-sh
arping-2.01/arping.c arping-2.01/arping-2/configure.in
arping-2.01/README arping-2.01/arping-2/arping.c
arping-2.01/arping.yodl arping-2.01/arping-scan-net.sh
arping-2.01/freebsd.h
[compton ~]$

In this example, there is a directory name (arping-2.01/) and this means
that the contents of the tarball will be placed in a directory named
arping-2.01 in "this" directory. On the other hand, it might have an
absolute pathname (/usr/src/arping-2.01/ for example) which means that
the files will be placed somewhere else. Lastly, it may be lacking a
directory name, and all you see is filenames, like this

Makefile arping.yodl arping-2/install-sh
LICENSE freebsd.h arping-2/configure.in
arping.8 openbsd.h arping-2/arping.c
arping.c solaris.h arping-scan-net.sh
README arping-2/

which means it will drop the files "right here" (which gets messy). In
this latter case, make a directory (mkdir directory_name), and move the
tarball into that directory (mv tarball.tgz directory_name), and change
into that directory (cd directory_name).

Execute the command 'tar -zxf tarball.tgz' (making the obvious correction)
and then change to the directory where the "new" files are located. Run the
command 'ls' to see what you have, and then start reading - paying attention
to the files in all CAPITAL letters - like README.
 

Unfortunately, that depends entirely on the instructions that are found
in the tarball. Start with the README and see what it tells you to do.
Make sure this source is meant for your distribution and release. Pay
attention to the kernel version numbers (run 'uname -a' to see what you
have now). You will probably also need the development packages, including
the compiler and GNU 'make'. These are not installed by default, so you
may need to install them before going further.

You may find additional help in the Usenet newsgroup alt.os.linux.mandriva
but I'd suggest you post from your ISP's news server RATHER THAN GOOGLE
because some otherwise helpful people don't see posts from groups.google.com.

Old guy

Unable to boot linux

Posted: 18 Oct 2006 12:04 PM PDT

Kiran Kumar wrote: 

In my other post I meant created a Logical partition as with parted or some
other tool and then install on that logical partition. It reads like you tried
to create the linux partitions by hand. You do not do that.

--
Blaming Jews for the actions of Israel is the new blood libel.
-- The Iron Webmaster, 3710
nizkor http://www.giwersworld.org/nizkook/nizkook.phtml
Mission Accomplished http://www.giwersworld.org/opinion/mission.phtml a12

How to fix bootfiles installed with VMWare?

Posted: 18 Oct 2006 09:28 AM PDT


Allen Kistler wrote: 

That's what i found out t. Downloaded the rescue-cd, used chroot and
reinstalled the kernel. And then it added scsi-hdd support:)

Booting Linux from an external USB drive

Posted: 18 Oct 2006 07:20 AM PDT

Mike wrote: 
Try using the flash drive in a USB-1.1 port. I don't care if it's
slower, it's usually a working solution.


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFFOZx3sjeOFtd+nycRAivyAJ9BjWx89qfZtfsLwI4rsa o+BMGdzgCghH/A
gJUCuF8LRXVwmOjQMKxBrlE=
=m623
-----END PGP SIGNATURE-----

hi, simple question

Posted: 18 Oct 2006 01:16 AM PDT

Good point. I was assuming that, in the setup stage, he was probably
operating as su. For a long time after I started learning Linux, I
couldn't see a reason to be anything but root. ; )



On Thu, 19 Oct 2006 12:54:03 +1000, faeychild <com>
wrote:
 

New Install Needing Partition Help

Posted: 17 Oct 2006 01:53 PM PDT

Im at that point where Im wanting more security on my system, like
partitioning /home, but I do not fully understand partitioning. I have
read and read over the past four days so I have pieced together
something that I think is correct.

I was told not to put the /root account on a primay and only /boot on a
primary. I dont know if that is correct or not. But I did it the other
way - now I wonder if I have to, or need to, change it.

FC5 Install Hang: ACPI: Assume Root Bridge [\_SB_.PCI0] bus is 0

Posted: 17 Oct 2006 07:14 AM PDT

In comp.os.linux.setup Jim Garrison <com>: 
 
 
[..]
 
 
 
 

Really? Iirc the same kernel parameter were mentioned in the URL
I posted...
 
 
 
[..]
 

Glad to hear!

--
Michael Heiming (X-PGP-Sig > GPG-Key ID: EDD27B94)
mail: echo qr | perl -pe 'y/a-z/n-za-m/'
#bofh excuse 357: I'd love to help you -- it's just that the
Boss won't let me near the computer.
Subscribe to: Posts (Atom)