Pages

Search

Specifically Deny Outlook Versions to Exchange - Microsoft Exchange

Specifically Deny Outlook Versions to Exchange - Microsoft Exchange

Specifically Deny Outlook Versions to Exchange

Posted: 11 Jun 2008 10:41 AM PDT

Just what I needed - Thanks Andy!!!

I did see the recommended versions you posted as well..I think we are going
to deny the ones we know we don't use and work on updating the one's we do so
that I can get above O2000 SP3

"Andy David {MVP}" wrote:
 

5.7.1 - Sender IP Must Resolve

Posted: 11 Jun 2008 06:53 AM PDT

Well honestly everything looks OK to me.
If its critical you may need to contact the email admins on the other side
to see whats up.

"Kenny" <microsoft.com> wrote in message
news:com... 

SMTP spoofing

Posted: 10 Jun 2008 03:53 AM PDT

"Lee Derbyshire [MVP]" wrote: 

No third party plugins or applications that permit this enforcement?
Seems a very simple task... :)

Clustering Options

Posted: 09 Jun 2008 12:03 PM PDT

Thanks to both of you.

"com" wrote:
 

IIS Default Web Site STOPPING

Posted: 09 Jun 2008 09:32 AM PDT

No - it seems to be deleting the event log.

But yesterday there were 3 things in the log:

6/9/2008 8:34:31
AM WinHttpAutoProxySvc Information None 12517 N/A EXCHANGE The WinHTTP Web
Proxy Auto-Discovery Service suspended operation.
6/9/2008 8:34:31
AM WinHttpAutoProxySvc Information None 12503 N/A EXCHANGE The WinHTTP Web
Proxy Auto-Discovery Service has been idle for 15 minutes, it will be shut
down.
6/8/2008 11:06:33 PM W3SVC Warning None 1013 N/A EXCHANGE A process serving
application pool 'ExchangeApplicationPool' exceeded time limits during shut
down. The process id was '832'.



"Andy David {MVP}" wrote:
 

Rapid database growth after installing archiving solution.

Posted: 08 Jun 2008 11:53 AM PDT


Sounds like a possibility. Know of any way to find out?

Ralph

"Ben M. Schorr, MVP" wrote:
 

Exchange Offline Access

Posted: 07 Jun 2008 04:57 AM PDT

A very good option!

"Rafavic" <microsoft.com> wrote in message
news:com... 

free/busy info shows detail not just blocks

Posted: 06 Jun 2008 12:52 PM PDT

I downloaded it, but can't connect to anything on my exchange 2007 server. I
keep getting could not expand errors or could not connect errors even though
it will list all the mailboxes.

"Leif Pedersen [ MVP]" wrote:
 

SSL Certificate

Posted: 05 Jun 2008 06:11 PM PDT

::hugs::!

"Andy David {MVP}" <com> wrote in message
news:com... 

Exchange Server Roles

Posted: 05 Jun 2008 01:03 PM PDT

Thanks Andy

"Andy David {MVP}" wrote:
 

Strange idea

Posted: 05 Jun 2008 01:55 AM PDT

Hi,

I would create a distribution list, grant the users send as on this group
and ask the users to select this group when sending (I don't think that
there is another automatic way).

See
http://blogs.technet.com/sbs/archive/2007/11/06/how-to-send-e-mails-with-exchange-using-a-different-from-address.aspx

Leif

"KF Thomas SHIU" <com.hk> skrev i meddelelsen
news:C46DE4B0.CC5F%com.hk... 

exchange 2007 setup fails on new 2008 server

Posted: 04 Jun 2008 09:14 PM PDT

yup it sure did
enabled ip6 and setup finished
thanks

"Alexander Zammit [MVP]" <alex@respond_to_group> wrote in message
news:%phx.gbl... 

Microsoft Word - Lost document

Microsoft Word - Lost document

Lost document

Posted: 20 Jan 2015 03:01 PM PST

I downloaded free app for word to my iPad. I started composing a rather in depth historical document which I worked on for 4-5 days. Each time I opened word the document appeared. No problem. I never did name the document but word was saving it constantly. Today I tried to use app but it was frozen. I reset iPad, still no document and word still frozen. I installed upgrade to my ipad 8.1.2 I think. After download complete word is working perfectly but the document is not there. The thought of re-researching all this material is painful. Help!

Macro to copy text, then save file as copied text

Posted: 20 Jan 2015 02:36 PM PST

I have a vast number of job applications where I am copying and pasting from a "print view" from a web browser into a MS Word document, which produces a document with lots of tables and nested tables, Somewhere in there is the name of the applicant... I can record a macro to find their name, since it'll always be in the same table/cell location, but I would like to have it Save As the name of the applicant as well. I can't seem to do that second part by just recording a macro.

Sub testing()
'
' testing Macro
'
'
    Selection.Find.ClearFormatting
    Selection.Find.Replacement.ClearFormatting
    With Selection.Find
        .Text = "Name:"
        .Replacement.Text = ""
        .Forward = True
        .Wrap = wdFindContinue
        .Format = False
        .MatchCase = False
        .MatchWholeWord = False
        .MatchWildcards = False
        .MatchSoundsLike = False
        .MatchAllWordForms = False
    End With
    Selection.Find.Execute
    Selection.MoveRight Unit:=wdCell
    Selection.Copy

so far so good, but then I'm having problems with this part because it wants to save everything as "John Smith.doc" every time.

    ChangeFileOpenDirectory "C:\Users\fogharty\Desktop\"
    ActiveDocument.SaveAs2 FileName:="John Smith.doc", FileFormat:= _
        wdFormatDocument, LockComments:=False, Password:="", AddToRecentFiles:= _
        True, WritePassword:="", ReadOnlyRecommended:=False, EmbedTrueTypeFonts:= _
        False, SaveNativePictureFormat:=False, SaveFormsData:=False, _
        SaveAsAOCELetter:=False, CompatibilityMode:=0
End Sub

Ideally, it would save as the applicant's name plus the current date... "John Smith 1-20-2015.doc, and to a specific folder on the desktop. But perhaps I'm dreaming.

Any help will be greatly appreciated. Thank you.

One more question on indexing all words in a Word document

Posted: 20 Jan 2015 01:31 PM PST

Now and then I need to make indexes in Word documents of the entire text of that particular document i.e. of every word from 1 letter and up.

Someone was kind enough to help me to a macro that helps to list the frequency, but I also need the INDEX.

I checked several macro sources, but didn't find one that simply takes over de impossible handword of marking every word in a tekst by hand.

Hoping!

Extract Comments to a new Document Macro - Including line numbers

Posted: 20 Jan 2015 01:17 PM PST

Hello

I am a newbie to using Macros. I found a template for extracting comments to a new document and managed to successfully create it and personalise the table titles. The table includes the page number the comment relates to. It would be far more useful to me for it to show the line number. Is there a way of doing this? Below is the macro code thingy I have been using. How do I get it to show which line number the comments relate to? Thank you in advance! If I manage to do this it will streamline my interview data analysis no end!

Penny

Sub ExtractCommentsToNewDocument()

    '=========================
    'Macro created 2007 by Lene Fredborg, DocTools - www.thedoctools.com
    'Revised October 2013 by Lene Fredborg: Date column added to extract
    'THIS MACRO IS COPYRIGHT. YOU ARE WELCOME TO USE THE MACRO BUT YOU MUST KEEP THE LINE ABOVE.
    'YOU ARE NOT ALLOWED TO PUBLISH THE MACRO AS YOUR OWN, IN WHOLE OR IN PART.
    '=========================
    'The macro creates a new document
    'and extracts all comments from the active document
    'incl. metadata
    
    'Minor adjustments are made to the styles used
    'You may need to change the style settings and table layout to fit your needs
    '=========================

    Dim oDoc As Document
    Dim oNewDoc As Document
    Dim oTable As Table
    Dim nCount As Long
    Dim n As Long
    Dim Title As String
    
    Title = "Extract All Comments to New Document"
    Set oDoc = ActiveDocument
    nCount = ActiveDocument.Comments.Count
    
    If nCount = 0 Then
        MsgBox "The active document contains no comments.", vbOKOnly, Title
        GoTo ExitHere
    Else
        'Stop if user does not click Yes
        If MsgBox("Do  you want to extract all comments to a new document?", _
                vbYesNo + vbQuestion, Title) <> vbYes Then
            GoTo ExitHere
        End If
    End If
        
    Application.ScreenUpdating = False
    'Create a new document for the comments, base on Normal.dot
    Set oNewDoc = Documents.Add
    'Set to landscape
    oNewDoc.PageSetup.Orientation = wdOrientLandscape
    'Insert a 4-column table for the comments
    With oNewDoc
        .Content = ""
        Set oTable = .Tables.Add _
            (Range:=Selection.Range, _
            NumRows:=nCount + 1, _
            NumColumns:=5)
    End With
    
    'Insert info in header - change date format as you wish
    oNewDoc.Sections(1).Headers(wdHeaderFooterPrimary).Range.Text = _
        "Comments extracted from: " & oDoc.FullName & vbCr & _
        "Created by: " & Application.UserName & vbCr & _
        "Creation date: " & Format(Date, "MMMM d, yyyy")
            
    'Adjust the Normal style and Header style
    With oNewDoc.Styles(wdStyleNormal)
        .Font.Name = "Arial"
        .Font.Size = 10
        .ParagraphFormat.LeftIndent = 0
        .ParagraphFormat.SpaceAfter = 6
    End With
    
    With oNewDoc.Styles(wdStyleHeader)
        .Font.Size = 8
        .ParagraphFormat.SpaceAfter = 0
    End With

    'Format the table appropriately
    With oTable
        .Range.Style = wdStyleNormal
        .AllowAutoFit = False
        .PreferredWidthType = wdPreferredWidthPercent
        .PreferredWidth = 100
        .Columns.PreferredWidthType = wdPreferredWidthPercent
        .Columns(1).PreferredWidth = 5
        .Columns(2).PreferredWidth = 23
        .Columns(3).PreferredWidth = 42
        .Columns(4).PreferredWidth = 18
        .Columns(5).PreferredWidth = 12
        .Rows(1).HeadingFormat = True
    End With

    'Insert table headings
    With oTable.Rows(1)
        .Range.Font.Bold = True
        .Cells(1).Range.Text = "Page"
        .Cells(2).Range.Text = "Code"
        .Cells(3).Range.Text = "Text"
        .Cells(4).Range.Text = "Interview"
        .Cells(5).Range.Text = "Date"
    End With
    
    'Get info from each comment from oDoc and insert in table
    For n = 1 To nCount
        With oTable.Rows(n + 1)
            'Page number
            .Cells(1).Range.Text = _
                oDoc.Comments(n).Scope.Information(wdActiveEndPageNumber)
            'The comment itself
            .Cells(2).Range.Text = oDoc.Comments(n).Range.Text
            'The text marked by the comment
            .Cells(3).Range.Text = oDoc.Comments(n).Scope
            'The comment author
            .Cells(4).Range.Text = oDoc.Comments(n).Author
            'The comment date in format dd-MMM-yyyy
            .Cells(5).Range.Text = Format(oDoc.Comments(n).Date, "dd-MMM-yyyy")
        End With
    Next n
    
    Application.ScreenUpdating = True
    Application.ScreenRefresh
        
    oNewDoc.Activate
    MsgBox nCount & " comments found. Finished creating comments document.", vbOKOnly, Title

ExitHere:
    Set oDoc = Nothing
    Set oNewDoc = Nothing
    Set oTable = Nothing
End Sub

Equation symbols in Word

Posted: 20 Jan 2015 12:27 PM PST

Hello. I've got a question about some symbols.

I want to put the "normal subgroup" Symbol, I mean, this symbol.

but I don't wanna open that menu and search for the symbol.

For example, many symbols can be written with a command, for example "less or equal than" may be inserted writting "\leq" in the equation. Or the ones at the left side of the "normal subgroup symbol", for "is subset or has this as a subset", can be inserted writting "\subseteq" or "\superseteq", "\cdot" can be used for "dot product"

This works a lot similar to LaTeX. the command for "less or equal than", and of "is subset of" is the same, the one for "has this as a subset" is "\supseteq", "\cdot" also works.
And I can write the normal subgroup symbol with the "\triangleleft" command in LaTeX. So... is there any way I can personalize this to have some command, or some quick way to write this symbol? The command \triangleleft doesn't work in word (Even when a lot of LaTeX commands work in word)...

It would be very good if I could assign it a command like the ones in LaTeX.

microsoft word wont open documents

Posted: 20 Jan 2015 12:26 PM PST

I have the brand new word, 2013, I try to open my lecture notes from my blackboard website and presentations on powerpoint and neither of the programs will allow them to be opened. Ive tried everything just says can not open no other options...anyone have any ideas?

Avery Label Template not accurate

Posted: 20 Jan 2015 10:50 AM PST

Using Office 2013 on a Windows 7 machine

I am trying to print a full page of return address labels using an Avery template (either 8167 or 5267) from the mail merge -> labels list of choices.   The label text keeps creeping down bit by bit so that by the time I am at the bottom of the printed page, the labels are not usable.  The return address has crept so low that only the first two lines of the address are actually printed on the label.   Haven't had this problem before so I don't even know where to look for a fix.

Word macro to insert review changes into a separate doc

Posted: 20 Jan 2015 09:34 AM PST

Hi,

I have the following code to take my changes into a new document but the author, type etc. are not being inputted into their own columns - the table is displaying with multiple rows and 1 column. Is there a way to assign each arev to a column?

Dim arev As Revision
Dim docsource As Document, doctarget As Document
Set docsource = ActiveDocument
Set doctarget = Documents.Add
With docsource
    For Each arev In .Revisions
        doctarget.Range.InsertAfter arev.Author & vbTab & arev.Type & vbTab & arev.Range & vbCr
    Next arev
End With
doctarget.Range.ConvertToTable
End Sub

Thanks,

Adam

Possible to hide text until it's printed?

Posted: 20 Jan 2015 07:40 AM PST

I was curious - and I can't seem to track down any sort of answer. Is it possible to format text in a way that it remains hidden in the digital view of the document, but shows up in standard black when the document is printed?

Cropping width and height not setting independently

Posted: 20 Jan 2015 07:13 AM PST

I'm using Format Picture>Crop to crop a number of images to the same exact size, entering the dimensions into the Crop position Width: and Height: fields. Although it appears that these dimensions can be set independently of each other (which is exactly what I would expect), changing one dimension very slightly changes the other. For example, I try to crop an image to 4cm high and 5.5cm wide; Word resets the dimensions to 3.99cm high and 5.49cm wide. It's not a big enough adjustment to be a problem, but I can't understand why Word is doing this in the first place. Has anyone else had this problem?

Thanks!

office 365

Posted: 20 Jan 2015 01:19 AM PST

Have had 365 since April 2014 on both my desk top and laptop, all worked fine until December 2014 now office 365 doesn't work on my laptop.  I have uninstalled and re-installed, used the repair online and had remote assistance try and help. Now it still doesn't work on my laptop and I need urgent help as I need it for my studies.

Printing Problems on Avery Label

Posted: 19 Jan 2015 11:48 PM PST

I downloaded a template for Avery 5163 labels.     I completed the label, looked at the print preview and clicked print.   The labels ran through the printer, but did not print!    I can open other documents and they print with no problem.  I ran a diagnostics test in Microsoft Office 2010  and it shows no problems.  I also ran a troubleshooter for my HP Photosmart 6515, it also shows no problems!   Has anyone else had this issue?  If so, how did you correct it?  

This is frustrating!!!

microsoft word on ipad

Posted: 19 Jan 2015 08:37 PM PST

Hi

i have been trying to save documents on microsoft word into my onedrive email account but it seems to fail cos the 'connecting' box is flashing endlessly.. does anyone know of a solution?

thanks

Double sided numerical (001-300) tickets, Please Help!

Posted: 19 Jan 2015 03:51 PM PST

I use Microsoft Office 2010.

I need to make 300 double sided tickets that will be used for a charity sub sale. I usually use templates when I need to do things like this but I cant seem to find a template that suits my exact needs.

I need to make 6 double sided tickets per page. They need to have a numerical count from 001-300. I don't have a printer that prints double sided so I will need it that I can print out the 300 tickets and then place them all in the printer again upside down and print the backside evenly for me to cut them out. I'd prefer the tickets not have an border/outline but if its necessary I will make the exception.

If someone could point me to a tutorial or explain how I could do this, it would be greatly appreciated!

Microsoft Office Programs Crash When I Try to Insert a Picture

Posted: 19 Jan 2015 03:11 PM PST

Microsoft Office programs, Word, OneNote, and Excel, crash when I try to insert a picture.  This occurs when I try to insert a picture that I had saved to the Desktop.  I have repaired Office several times but this keeps happening.

I do have the add-in "Office Tabs" installed.

Any tips?

Macro for Document and PDF-Both With New Names and Locations

Posted: 19 Jan 2015 03:08 PM PST

I want to create a macro that allows me to "save as" an existing documents with a new title, and creates a PDF of it. I want to be able to create both simultaneously, name them the same thing, and I want to choose where they get saved.

So far, I've scoured the web and found this; it creates a new document and a PDF, but saves them both in the same place the original document is saved in.

Dim strName As String

ActiveDocument.Save

strName = Left(ActiveDocument.FullName, Len(ActiveDocument.FullName) - 4)

strName = strName & "pdf"

ActiveDocument.ExportAsFixedFormat OutputFileName:=strName, _

                              ExportFormat:=wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _

                              wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, to:=99, _

                              Item:=wdExportDocumentContent, IncludeDocProps:=True, KeepIRM:=True, _

                              CreateBookmarks:=wdExportCreateNoBookmarks, DocStructureTags:=True, _

                              BitmapMissingFonts:=True, UseISO19005_1:=True


Also, I've found this; It does half of what I want. It allows me to name and choose where the PDF goes, but doesn't include the document. 

Dim StrPath As String, StrName As String, Result

With ActiveDocument

 On Error GoTo Errhandler

 StrPath = GetFolder & "\"

 StrName = Split(.Name, ".")(0)

 While Dir(StrPath & StrName & ".pdf") <> ""

   Result = InputBox("WARNING - A file already exists with the name:" & vbCr & _

     Split(.Name, ".")(0) & vbCr & _

     "You may edit the filename or continue without editing." _

     & vbCr & vbTab & vbTab & vbTab & "Proceed?", "File Exists", StrName)

   If Result = vbCancel Then Exit Sub

   If StrName = Result Then GoTo Overwrite

   StrName = Result

 Wend

Overwrite:

 .ExportAsFixedFormat OutputFileName:=StrPath & StrName & ".pdf", _

 ExportFormat:=wdExportFormatPDF, OpenAfterExport:=False, _

 OptimizeFor:=wdExportOptimizeForPrint, Range:=wdExportAllDocument, _

 Item:=wdExportDocumentContent, IncludeDocProps:=True, KeepIRM:=True, _

 CreateBookmarks:=wdExportCreateNoBookmarks, DocStructureTags:=True, _

 BitmapMissingFonts:=True, UseISO19005_1:=False

End With

Errhandler:

End Sub

Function GetFolder() As String

Dim oFolder As Object

Can anyone help come up with a variation on the two or just help fill in the gaps? I would really appreciate it. Thanks.

Can I text wrap a task name in a network diagram? Microsoft Project

Can I text wrap a task name in a network diagram? Microsoft Project

Can I text wrap a task name in a network diagram?

Posted: 24 Jan 2006 07:20 AM PST

Hi Mike,

You're welcome and thanks for the feedback.

I hate to say this but yes, I would come up with shorter names. Just
playing around gave me task names of about 130 characters before it cut
things off.

Julie
"Pikey_M" <microsoft.com> wrote in message
news:com... 

changing resource loading contour

Posted: 24 Jan 2006 06:41 AM PST


colin919 wrote: 

Just as an aside, "back" loading is when the work effort is mostly
toward the end of a task's duration. "Front" loading is when the work
is mostly at the beginning. Bell curve loading starts low, goes up in
the middle, and tapers off toward the end.
Hope this helps in your world.
 

Creating a filter that prompts me for a value

Posted: 24 Jan 2006 05:46 AM PST

Hi Greg,

You're welcome and thanks for the feedback.

If you wish to test for multiple numbers 23 OR 53 you'll need to modify the
filter with an OR condition.

Julie
"Greggy" <com> wrote in message
news:googlegroups.com... 

Linking tasks to milestones

Posted: 24 Jan 2006 03:02 AM PST

Jan,

You are a star. I can now carry on with my project, at least for today.

Thanks again

Regards

Figen

"Jan De Messemaeker" wrote:
 

Changing default working time on Project XP and 2003

Posted: 23 Jan 2006 12:19 PM PST

Hi Antonio,

Welcome to this Microsoft Project newsgroup :-)

You might like to see FAQ Item: 5. Default Working Hours

FAQs, companion products and other useful Project information can be seen at
this web address: http://www.mvps.org/project/

Hope this helps - please let us know how you get on :-)

Mike Glen
Project MVP

AntonioR20 wrote: 

Handbook/Manual Recommendation Needed

Posted: 23 Jan 2006 12:01 PM PST

Thanks, I ordered on Amazon.com

"davegb" wrote:
 

Adding dates

Posted: 23 Jan 2006 11:09 AM PST

Hi,

Have read your question and the replies. There is one other scenario that
may be what you need. It is a situation I come across regularly. The
situation is that a notification is required x days before a particular task
starts. The task starting though is not driven by the notification but
rather by other factors. ASn example might be in construction that before
the floor is poured the local authority is notified 1 week before the pour.
The pour date is predicated on many other tasks happening and where those
tasks are delayed so the floor pour is delayed. Using the normal FS link
with a 1 week delay makes the start of the floor pour starting seven days
after notification rather than notifying seven days before the pour. A
subtle difference but important.

In this situation I 'drive' the notification task back from the floor pour
in this case by the 1 week, using the notification task as a predecessor of
the floor pour BUT using a SF link and a -1week delay.

Using this approach if there is a change at all to the tasks that affect the
floor pour, then the notification date is changed. If the other tasks are
delayed then the notification can be delayed, if the floor pour can start
early then the notification period must show an earlier date.

In this case the notification does not drive the other task but is important
nonetheless.

Hope this helps .

"JRT" wrote:
 

Resequeuce tasks changes dates ????

Posted: 23 Jan 2006 08:21 AM PST

You're welcome, Dave :-)

Mike Glen
MS Project MVP


dave wrote: 

Having my cake and eating it, too

Posted: 23 Jan 2006 07:07 AM PST

In article <com>,
"Andrew K" <microsoft.com> wrote:
 

Andrew,
You're welcome. Dale and I had the same answer, he just detailed the
filter for you.

John 

Sorting my Project by ID

Posted: 23 Jan 2006 02:56 AM PST

In article <com>,
"Paul" <microsoft.com> wrote:
 

Paul,
You're welcome. It should be real easy to look at the sort criteria but
I guess the problem solved itself - scary.

John

How do you save an MSProject Gannt as a .gif file?

Posted: 22 Jan 2006 09:36 PM PST

Hi geordabroad ,

Welcome to this Microsoft Project newsgroup :-)

Please see FAQ Item: 16. Project Viewer.

FAQs, companion products and other useful Project information can be seen at
this web address:http://project.mvps.org/faqs.htm

Hope this helps - please let us know how you get on :-)

Mike Glen
Project MVP

geordabroad wrote: 

Add font color button to the microsoft project toolbar

Posted: 21 Jan 2006 09:01 PM PST


Cherie wrote: 

You could record a macro while you go to the font color selection box.
Then create a custom button (right click on any toolbar, Select
Customize, Select Commands, Macros, then drag the smiley face button
onto whichever toobar you like). Right click on the button, click
Change Button Image and select a button you like. The right click on
the button again, and select Assign to macro, select the macro you
recorded.
Hope this helps in your world.

How do I set up a simple calendar in project 2003

Posted: 20 Jan 2006 01:59 PM PST

Hi Sandy,

I would suggest using Microsoft Outlook's task list or the Outlook Calendar,
particularly as you want reminders. With tasks, you can set due dates,
start dates as well as add some notes that may be useful. You could also
create a new calendar in Outlook and use that visual look as well.

I hope this helps. Let us know how you get along.

Julie
"sknapp" <microsoft.com> wrote in message
news:com... 

Deleting tasks with actuals entered

Posted: 20 Jan 2006 01:02 PM PST

If all you they need to do is review the schedule, save the project with a
password. They will only have read access.
File/ save As/ Tool/ General Options...

"Shivesh" wrote:
 

Managing Multiple Projects

Posted: 20 Jan 2006 12:03 PM PST

You're welcome, Figan and thanks for your feedback :-)

Mike Glen
MS Project MVP


Figen wrote: 

Custom Calendar

Posted: 20 Jan 2006 10:22 AM PST

Look at Tools/Options/Calendar and see if that helps. You can set the start
of a year there then go to tools chage working time and look at the Standard
calendar there. It should say (Project Calendar) next to it. Good Luck

"JMZ" wrote:
 

Project should allow for "computer times" (ex. microseconds)

Posted: 20 Jan 2006 08:35 AM PST

It seems like it would be, and mathematically it probably would be trivial,
but consider how data is stored, what the data represents, and the
implications of such a change would be for scheduling projects such as MSP
is presently intended for. Project is storing its time values with an
integer counter register tracking 6 second "ticks" of a master clock. The
register stores sufficient ticks to cover the date range of 1/1/1984 thru
12/31/2049. If each "tick" were to represent a microsecond instead of a
deciminute, the register would max out and overlow with a date range one
six-millionth as long as present. In other words, the longest project it
could accomodate would last a little over 1 hour from start to finish.

Your basic error is in thinking that Project is some sort of time management
or calendaring tool. It is not. It is a tool designed to model the various
tasks required to complete the deliverable and schedule the work defined by
the model that is to be done by resources in projects that have observable
start and end points and result in a unique outcome.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



"Bill Waters" <microsoft.com> wrote in message
news:com... 

Tools/Tracking/Update Project

Posted: 20 Jan 2006 07:11 AM PST

I have turned off the option to have task honor their constrants. Should this
work? I did look and these task I refer to have a start no earlier constrant.

"John M." wrote:
 

Microsoft Project and ISA Server

Posted: 20 Jan 2006 05:28 AM PST

Hi Luis,

Try posting on the server newsgroup. Please see FAQ Item: 24. Project
Newsgroups. FAQs, companion products and other useful Project information
can be seen at this web address: http://project.mvps.org/faqs.htm

Mike Glen
Project MVP


Luis Buratto wrote: 

Macro and Micro Planning

Posted: 20 Jan 2006 04:51 AM PST

Thanks for your help, much appreciated.
--
Robin


"davegb" wrote:
 

Schedule dates do not reflect duration

Posted: 20 Jan 2006 03:33 AM PST

In article <com>,
"Scottie" <microsoft.com> wrote:
 

Scottie,
In addition to what Catfish said, you might also want to display the
time (Tools/Options/View tab Date Format) in the Start and Finish field
to insure the task Duration is truly 5 full days.

John
Project MVP

Set the start and finish to be in the format of hours:minutes

Posted: 19 Jan 2006 05:25 PM PST

Hi ATOMMC ,

Welcome to this Microsoft Project newsgroup :)

Tools/Options.../View tab. Change the Date format to your requirement by
selecting from the pick list eg: 12:33. That should fix it for all of your
projects.

FAQs, companion products and other useful Project information can be seen at
this web address: http://project.mvps.org/faqs.htm

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP

ATOMMC wrote: 
Subscribe to: Posts (Atom)