Pages

Search

Exchange 2007 - Anti-Spam only for specified users? - Microsoft Exchange

Exchange 2007 - Anti-Spam only for specified users? - Microsoft Exchange

Exchange 2007 - Anti-Spam only for specified users?

Posted: 13 May 2008 06:13 AM PDT

Great! I did see that parameter, but I didn't know I could use it for
individual mailboxes. It seemed to me that it was a global setting. I'll
look more into that cmdlet usage.
Thanks,
Steve



"Neil Hobson [MVP]" wrote:
 

cant send to email address in France

Posted: 09 May 2008 03:44 PM PDT

On Mon, 12 May 2008 09:02:00 -0700, jdc
<microsoft.com> wrote:
 

Glad you got it working.

 

exchange 2000 mailbox recipient policy will not delete subfolders

Posted: 09 May 2008 07:38 AM PDT

It does work on some of the subfolders, just not all of them. the log shows
the subfolder and email within, it just wont delete them. but it will delete
others in subfolders in the same location. not sure how it would pick and
choose.

Thanks

"Bharat Suneja [MSFT]" wrote:
 

Sync Mobile 6 with Exchange Not working

Posted: 09 May 2008 07:01 AM PDT

I posted int SBS newsgroups.

I reinstalled Activesync 4.5. I reset the phone. But when I entered
configuration information for setup I get this message. "Microsoft Exchange
did not accept your login credentials click retry to enter your credentials
again or click continue to sync with smartphone anyway."

I've checked the exchange server setup for mobile set up. It is correct. I
checked the user permissions and they are authorized for mobile. The user can
remote in using OWA from the Smartphone.

"Lanwench [MVP - Exchange]" wrote:
 

CCR Clustering

Posted: 09 May 2008 06:13 AM PDT

Thanks Bharat

"Bharat Suneja [MSFT]" wrote:
 

Clustering

Posted: 07 May 2008 01:44 PM PDT

Thanks Bharat

"Bharat Suneja [MSFT]" wrote:
 

Port 443 Banner

Posted: 06 May 2008 09:46 AM PDT

"Lee Derbyshire [MVP]" <email a@t leederbyshire d.0.t c.0.m> wrote in
message news:phx.gbl... 

BTW, check to see if you already have a URLScan.ini file, before you install
it. If you have SBS, it will already be there.

Exchange 5.5 Free/Busy on public calander

Posted: 06 May 2008 08:13 AM PDT

On Tue, 6 May 2008 16:29:30 +0100, "Giorgio" <com>
wrote:
 

No. :)

Using a resource mailbox is the recommended way to do this.

 

OWA issues with email attachments

Posted: 06 May 2008 07:55 AM PDT



Ed Crowley [MVP] schrieb: 

Hi Ed,

yes I am sure that nothing is blocked. Attachments work with OWAs from
different Exchange servers using the same installation of IE.


--
Kind regards,

David Kluge

SMTP Queues "hang" intermittently

Posted: 05 May 2008 08:23 PM PDT

I'm sorry to take so long to reply here. I tried a couple of times with an
attachment but perhaps they are not allowed on the board. So I will try
typing in the essence of the screen shot from Message Tracking.

First though, to answer your question, of course I have the queues cleared
now,and have been all day, but it seems to me that some were scheduled, some
were queued, and some were retry if those statuses sound right.

The following is the information from a screen shot from message tracking
for one of the stuck the messages that was in one of the queues. They just
seem to keep trying but nothing happens.

From: Bruce Smith
To: org
Sent: 5/5/2008 1:29 PM
5/5/2008 1:29 PM SMTP Store Driver: Message Submitted from Store
5/5/2008 1:29 PM SMTP: Message Submitted to Advanced Queuing
5/5/2008 1:29 PM SMTP: Started Message Submission to Advanced Queue
5/5/2008 1:29 PM SMTP: Message Submitted to Categorizer
5/5/2008 1:29 PM SMTP: Message Categorized and Queued for Routing
5/5/2008 1:29 PM SMTP: Message Routed and Queued for Remote Delivery
5/5/2008 6:09 PM SMTP: Message Submitted to Advanced Queuing
5/5/2008 6:09 PM SMTP: Started Message Submission to Advanced Queue
5/5/2008 6:09 PM SMTP: Message Submitted to Categorizer
5/5/2008 6:09 PM SMTP: Message Categorized and Queued for Routing
5/5/2008 6:09 PM SMTP: Message Routed and Queued for Remote Delivery
5/5/2008 8:24 PM SMTP: Message Submitted to Advanced Queuing
5/5/2008 8:24 PM SMTP: Started Message Submission to Advanced Queue
5/5/2008 8:24 PM SMTP: Message Submitted to Categorizer
5/5/2008 8:24 PM SMTP: Message Categorized and Queued for Routing
5/5/2008 8:24 PM SMTP: Message Routed and Queued for Remote Delivery
5/5/2008 11:42 PM SMTP: Message Submitted to Advanced Queuing
5/5/2008 11:42 PM SMTP: Started Message Submission to Advanced Queue
5/5/2008 11:42 PM SMTP: Message Submitted to Categorizer
5/5/2008 11:42 PM SMTP: Message Categorized and Queued for Routing
5/5/2008 11:42 PM SMTP: Message Routed and Queued for Remote Delivery
5/5/2008 11:42 PM SMTP: Non-Delivered Report (NDR) Generated

I believe that the NDR at the end might have been my doing because that is
about the time I was working on things. But I had other messages in
different queues that had just as long or longer message tracking entries
just like this one.

There was one however that had a rather strange last line. After the
"Message Routed and Queued for Remote Deliver" entry, the next line was the
standard "Started Outbound Transfer of Message", but the following line
looked a bit corrupt: "Message transfered to
*************2*******************........" rather than listing the mail
server"

If there is something that could be more useful let me know and I will post
it. Tomorrow I hope I have time to look at the SMTP logs for those days
although I haven't really got the jist of how to read everything in them.

Again, thanks.



"Cliff Galiher" <com> wrote in message
news:%phx.gbl... 

Exchange 2007 and Office Communications Server 2007 on Same Machin

Posted: 05 May 2008 02:54 PM PDT

Hello,

Thank you for your post.

My name is Robbin Meng, and it is my pleasure to work with you on this
issue!

Please allow me to confirm that my understandings are correct. As I
understand it, the issue is:

You would like to know if you can install OCS 2007 on the same server with
Exchange 2007 installed.

If I have misunderstood your concerns please feel free to let me know.

Since I am Exchange newsgroup technical engineer, I am not very familiar
with OCS 2007 deployment, however, based on experience and research, I
strongly do not recommend you to install OCS on Exchange server as the
mediation server role from OCS 2007 cannot be on the same server because it
uses those specific ports etc. Moreover, Exchange server 2007 is a
sensitive server for system resource, otherwise it may possibly cause heavy
workload or perforce issues and server no responding etc. potential
problems.

For more information, please check the below articles:

Download the Office Communications Server 2007 Evaluation Guide
http://download.microsoft.com/download/7/4/4/744b6734-561a-40a9-8d3d-67abf1c
9db06/OCS%20Evaluation%20Guide%20Launch%20FINAL.pdf

Office Communications Server 2007 Doent: Supportability Guide(Software
Infrastructure/Hardware Requirements for installing Office Communicator
2007)
http://www.microsoft.com/downloads/details.aspx?FamilyId=F8CC9B59-225F-425D-
BD3A-E506396C6207&displaylang=en

For your interest, I also found a similar instance:

OCS 2007 Mediation server with Exchange 2007 SP1 on a windows 2003 X64 OS
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2881361&SiteID=17

If you have any questions or concerns, please do not hesitate to let me
know.

Thank you for your time and cooperation!

Best regards,

Robbin Meng(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

================================================== ===
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
================================================== ===

This posting is provided "AS IS" with no warranties, and confers no rights.

Exchange 2007 Resources and Outlook 2003

Posted: 05 May 2008 02:29 PM PDT

Yes, OL2003 doesn't "get" that information.

Kerberos NTLM

Posted: 05 May 2008 02:01 PM PDT

So, what is the Web server and how is it configured for Kerberos?

--
Svyatoslav Pidgorny, MS MVP - Security, MCSE
-= F1 is the key =-

* http://sl.mvps.org * http://msmvps.com/blogs/sp *

"filip" <hr> wrote in message
news:phx.gbl... 

Email storage and CRM

Posted: 05 May 2008 12:54 PM PDT

Thank you for your quick reply.

We are implementing CRM and I have not been brought in for much of the
project except to provide the server support. Currently, our employees have
very large Exchange mailboxes and I would like to begin implementing storage
limits. However, I was told to wait since the impression was that once CRM
is in place, e-mails linked to contacts in MS CRM will get taken out of the
Exchange Information Store and stored within the CRM system.

As the Network Administrator, I have concerns pertaining to the information
store but the COO (former Director of Finance) has asked me to wait until CRM
is in place.

Is this assumption true?

Thanks!

"Mark Arnold [MVP]" wrote:
 

Microsoft Word - change search engine for online pictures within Word 2013

Microsoft Word - change search engine for online pictures within Word 2013

change search engine for online pictures within Word 2013

Posted: 09 Jan 2015 09:28 AM PST

The school district I work in filters the Bing search engine. Now Office 2013 automatically goes to Bing to search for pictures. How do I change the automatic search engine for online pictures within Office 2013?

Error while running Macro's in word 2013!!!!!!!!!

Posted: 09 Jan 2015 08:50 AM PST

Hi,

i'm working in xxx Technologies, and my natural of job is Document Sepcialist. Today i handled 30 pages in word document. When i tried to run macro's, it shows the error message "input string is not in correct format". This issue stops my entire work.

How to solve this issue?  Please HELP ME!!!!!

OS: Windows 7 Enterprise 64 bit

APPLICATION: Ms Word 2013

Linking Flickr/Any other Image Hosting Site to Word for Blogging

Posted: 09 Jan 2015 08:03 AM PST

Hi, I recently started using 'Blogging' on my wordpress site using the Feature provided in Office [ https://support.office.com/en-gb/article/Help-with-blogging-in-Word-3ad4ad8d-06a3-441d-99cd-c65e13a3433d#__toc321212402 ]

I have a question regarding the 'Picture Options' . How Can I use a third party server like flickr or any other Image hosting site so that the images that I use in word gets uploaded to those sites .

What to enter in the "Upload URL" and "Source URL" ? 

Problem updating date field

Posted: 09 Jan 2015 08:00 AM PST

I have a date field inserted into a header in a Word document.  When I try to update the field, either using F9 or by clicking on the field itself, the date always reverts to Jan-15.  Any clues as to what might be going on here?

Hyperlink text code

Posted: 09 Jan 2015 03:57 AM PST

When trying to insert a hyperlink into some text I keep getting this code coming up and I can't seem to get rid of it. I can't see any codes or macros running and can't get this to go back to the formatting it normally has. 

{HYPERLINK  "url here"}

How can I get rid of it?

Edit Word Documents in Read Mode Word 2013

Posted: 09 Jan 2015 03:17 AM PST

Is it just me or is the lack of an 'edit' funciton in Read mode really annoying? In previous versions of Word, you could edit in read mode.  Does anyone know if there is a work-around solution? I'm getting pretty fed up of having to go back to 'view' to edit documents every time I want to make a slight amend.

Microsoft Word letters are displaying as weird symbols.

Posted: 09 Jan 2015 02:11 AM PST

Hi, my MS Word 2013 has had this weird glitch ever since I didn't use it for a period of a month or so. Is there a way to fix this or should I just delete and reinstall MS Office? Thanks for your help! (see attachment)

Changing default bullet in Word 2010 - 2013

Posted: 09 Jan 2015 02:09 AM PST

I asked my question on the Dutch community (here) but nobody seems to know the solution. I will try to explain it in English.

I am making the new Office templates for our company, however, there is still one problem. It seems impossible to change the default bullet in Word 2010 or 2013.


The problem is this:

In the new template, we want to align each enumeration with the text, as you can see in the picture: 

This is the case when I use the style "bullet list", which is already defined in the document, and apply it to a list. I also created a "new list with multiple levels" and it works when I use it to create a new enumeration. However, most users don't use a style or a list with multiple levels to create a summing-up. They just click the default bullet in the library bullets. And when you do, the text jumps further away. Not on the same line as the other text in the template.

Does someone know how I can change the default bullet in this template without using a work around (lists, style)? Maybe it is possible with VBA? At first I wanted to avoid VBA but if that is the only solution, then fine. But not everyone will need a list in the document so it must be a code that only works when the default bullet is used.

Thank you in advance for looking at this problem,

Greetings, 

Tessa

Corrupt Word Docs - cannot open

Posted: 09 Jan 2015 12:04 AM PST

I have spent that last 2 days reading the posts here and various online, whitepapers, and recovery docs from "leading" software / document recovery tools. Nothing is working but I still do not believe all is lost. Yes, my bad for not having a backup - that aside...

I had a workstation at my office that got infected. The employee was saving her Word 2010 docx's to her "My documents" folder instead of the "data drive". A "g-squad" type person came out, told me it could not be disinfected so he wiped the system and reloaded Win7. Not sure how he "wiped" it but I imagine he just deleted the partition on Win7 reload. I freaked when I saw he didnt backup the docs in the my doc folder before he reloaded, and he told me that was MY fault for not backing up... 

He popped in a CD and
said he was able to "find" the "digital image" of the docs on the harddrive. A few minutes later I had the Word file icons back on the desktop. I tried to open the docs and got the error: "...cannot be opened because there are problems with the contents" and "The file is corrupt and cannot be opened"

I have tried:
opening as a TXT
sending to GMAIL and trying recovery
tried "open/repair" option in Word
importing into many "web-based" html/xml processors
many other attempts 
So I have spent the last couple of days looking at MANY options. The best I can do is open the doc but I get a page of ASCII characters. Data recovery specialists in this city charge a LOT of money to do this, and I am pretty darn sure I can do the same as long as I had the proper tools. I have looked at a LOT of software but haven't purchased any yet. I have read MANY MANY posts here on EE, and have looked at many of those packages, way too many to list here but lets just say at least the top 20 "recommended" packages. They all say the same thing about recovering from NTFS, rebuilding the headers, etc, etc. but they all seem "consumer" in quality. 

Is purchasing a "recovery" software my ONLY choice?

Delete Sequence Field Code from entire document, Macro?

Posted: 08 Jan 2015 03:52 PM PST

So I have a document that has the following:

Figure #: 

The # representing the SEQ field code.  I want it to display without the number:

Figure:

What is the best way to quickly remove the numbering from over 100 instances of this format?

If the only way is a macro, I would appreciate the code to do so.

Thanks!

Liscences limits - Microsoft Office forums

Liscences limits - Microsoft Office forums

Liscences limits

Posted: 30 Apr 2008 03:25 PM PDT

I'll give that try..thakns

"Jeff Gaines" wrote:
 

Office 2007 Set-up in corporate environment

Posted: 29 Apr 2008 10:00 AM PDT

Hi J.,

You may want to review the information on this in the Microsoft Office 2007 Resource kit,
http://technet.microsoft.com/en-us/library/cc179140.aspx on elevated permissions.

The actual installation of Office 2007 is done from the Local Installation Source (\MSOCache folder) after that folder is created on
the individual PC. The folder is created in the same drive as the \Program Files\ entry for Office. In addition, Office setup
writes files to the registry and to both the Windows folders and the \Program Files\Common Files\Microsoft shared.
In addition, Office writes a let of temporary files during installation so be sure you have your TEMP= and TMP= system variables
pointed to a location that is neither write or deletion protected.

The permissions required for running Office are listed in this article.
http://support.microsoft.com/kb/277867/en-us?FR=1

========== 
Hello All,
I'm project lead on the upgrade of our Office system here from Office
20003 to 2007. For the last week I have had trouble installing the
application. I kept getting an error during the first part of the
installation claiming that a certain file on the installation DVD
could not be found. When I browse to the file, I get an "Invalid
Location" error.
That being said, I was able to resolve this issue: Our office PCs are
set-up with the archaic C/D drive partition, & setting the C-drive to
READ ONLY for non-admin users. Even if you are logged in as an Admin,
you will not be able to install Office 2007 unless the C drive rights
are changed to allow writing ability for all users. By "unlocking" the
C-drive, I was able to successfully install the software.
Now, this is an over-all issue because the manpower required to
temporarily remove the C drive protection to install the application
would be ridiculous. And, by setting group policy to allow writing to
the C drive, I leave open some security holes (again, I understand
this is not the most efficient security system we have, but it is out
of my hands). So, I need to figure out which folder on the C drive is
being created &/or written to so that I can set group policy to allow
User write rights to that particular spot only.

Does anyone have any ideas?

If this does not make any sense, let me know & I can re-clarify.

Thanks much!

--J. >>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

print in black

Posted: 28 Apr 2008 09:04 AM PDT

Nope no dots

"JoAnn Paules" <com> wrote in message
news:%phx.gbl... 

Installing an Office product over another version..........

Posted: 28 Apr 2008 07:21 AM PDT

Thats what I thought, but I wasnt sure. I didnt think it would remove. I
was concerned that it would remove Access because the client has software who
uses it.

"Bob Buckland ?:-)" wrote:
 

Office Will Not Function

Posted: 27 Apr 2008 01:19 PM PDT



"MaxD" <rr.com> wrote in message
news:com... 


It sounds like you had a trial version and it was never changed. Now
the trial is over. Are you sure it did not ask you about that?

--
Joseph Meehan

Dia 's Muire duit

setup cannot find file excel.en-us

Posted: 27 Apr 2008 11:29 AM PDT

On Apr 27, 12:04pm, karl <microsoft.com> wrote: 

Is your hard drive split into a C & DD drive partition? If so, make
sure the security on the C drive gives all users full write rights. I
was having the same probem & by temporarily adjusting the security
settings on the C drive, I was able to install the software.

--J.

Office 2007 set up problems

Posted: 26 Apr 2008 08:25 AM PDT

Whilst I appreciate your comment I have posted my problem to these
discussions groups on several occassions - see posting below this one (my 5th
posting of this same problem over 5 months..
Thank you for taking the time to read my suggestion
Ken

"Joseph Meehan" wrote:
 

Office 2007 Enterprise set up successful but Help will not work

Posted: 26 Apr 2008 08:22 AM PDT

Thanks taking the time to reply...
I got my Enterprise copy sent direct from MS - because my company has so may
users they cannot support the HUP installations as well as managing the
company wide rollout and use...
Just out of interest what would your reply have been if I had omitted the
word Enterprise from my question.

"Peter Foldes" wrote:
 

Office Enterprise 07 Installation help

Posted: 26 Apr 2008 05:18 AM PDT

Hi Peter,

Thanks for your help. Is there a special way to do that? I am not really
sure how I would have done that in the first place.

Thanks

Gerry

"Peter Foldes" wrote:
 

Separate Office settings for different users

Posted: 25 Apr 2008 10:10 PM PDT

Thanks. My new questions are:
1. in what folder should normal.dot reside?
2. if I have MS Office already installed, how to I make it recognise a new
user?

Thanks/gary

"Howard Kaikow" wrote:
 

Office 2007 Enterprise Setup Succeed - But start-up problems

Posted: 25 Apr 2008 05:03 PM PDT

So? Which is the cause of this strange issue?

"enccompany" wrote:
 

Office Pro Trail Won't Install Because OutLook Is Not Present??

Posted: 24 Apr 2008 05:45 PM PDT

OEM Editions of MS Office 2007 trials are often 'hybrid product' editions (i.e. it includes both Student/Teacher and 'Professional'
trial editions).

You may want to try the steps in this article to remove things and then restart and try the installation.
http://support.microsoft.com/kb/928218/en-us?FR=1


===========
<<"hbiz0" <microsoft.com> wrote in message news:com...

I appreciate your suggestion, but I have no Outlook installed. When I got
the laptop two weeks ago, it only came with a trial version of Office Stu &
Home 2007. That is the dilemma.

Some coding somewhere in the MS maze seems to make the Pro trail installer
THINK Outlook is installed. That is why I was wondering if there is some
cleansing file that deletes whatever coding is confusing the trail installer. >>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

office enterprise 07 wont install on vista home premium

Posted: 24 Apr 2008 10:28 AM PDT

Doesn't work like that unfortunately, support is from MS not the employer.
Anyway, MS support said DVD was corrupted & suggested I download the trail
version and use the product key that came with the DVD. Worked ok
"Peter Foldes" wrote:
 

Microsoft CRM - Post callouts fire SOMETIMES...

Microsoft CRM - Post callouts fire SOMETIMES...

Post callouts fire SOMETIMES...

Posted: 24 Aug 2005 07:22 PM PDT

Well, I figured out something....

My application that works is executing as "Administrator" user. When I
login to the prebuilt CRM user interface as "Administrator" my
post-callouts fire fine.

But if I login to the crm as "Joe User" even if that user is a member
of the domain "Administrators" group - No Dice.

So the problem is obviously user rights of some sort? Anyone got a
clue?

MS CRM 1.2 Sales for Oulook Problem

Posted: 24 Aug 2005 03:18 AM PDT

hi,
this helped!!

http://www.microsoft.com/Businesssolutions/Community/Newsgroups/dgbrowser/en-us/default.mspx?dg=microsoft.public.crm&mid=778a2f22-83da-4ab5-b153-9890a7aa41e6&sloc=en-us

Regards
Thomas


"Saku" wrote:
 

Upgrade to another another language

Posted: 24 Aug 2005 02:49 AM PDT

As far as I know you can't redeploy to a different language. So the
redeployment is not an option. I have done the trick (from Dutch to
English) by using the data migration framework and with that tool
moving all the data to the new server.
Thginking about how to change the forms is more work then changing the
forms, so I would make screenshots from your old system and make
extra's to the forms again.

Publish failing, Why does this happen

Posted: 24 Aug 2005 02:29 AM PDT

Hi Isalgado,

The passwords are not the problem, the CRM is still functioning fine.

"isalgado" wrote:
 

External Error - No Such Object On Server, DC problem?

Posted: 24 Aug 2005 01:41 AM PDT

HI isalgado
I'sure your are right. But can you please give me more details? How to do it?
Where is the SID ? How to change in CRM?
Thanks.

"isalgado" wrote:
 

Exam Voucher

Posted: 23 Aug 2005 02:46 PM PDT

Hi Alex,

Thank you very much for the information,

GI

"Alex Goss" wrote:
 

OnChange Event Script

Posted: 23 Aug 2005 02:09 PM PDT

Rick,

This syntax works for disabling a memo field:
crmForm.fieldname.disabled = false;

There is some information going around on the internet regarding form
manipulation with javascript. These two blog posts might be useful:
http://blogs.msdn.com/joris_kalz/archive/2005/07/27/444152.aspx
http://ronaldlemmen.blogspot.com/2005/07/multi-select-box-in-mscrm-v12.html

Good luck,

Ronald Lemmen
Avanade Netherlands
"Rick" wrote:
 

CRM SFO Installation Problem

Posted: 23 Aug 2005 10:32 AM PDT

you mentioned that the user you are installing as is a memeber of the domain
admins group - is the user or the domain admins group a member of the local
administrators group on the workstation? That's the only permission that is
required as far as I know.

The first thing that should appear (immediately) is the EULA page - can you
verify that there is a file called "MSCRMClientEULA.rtf" in the same
directory as the setup.exe?

Dave


"pdub" <microsoft.com> wrote in message
news:com... 

Importing leads and workflow

Posted: 23 Aug 2005 10:17 AM PDT

thanks. That's what I figured.

Pushing out SFO with SMS

Posted: 23 Aug 2005 06:29 AM PDT

great news, thanks Ilana.


"Ilana Smith" <microsoft.com> wrote in message
news:phx.gbl... 

Exchange Email Router CRM Server 2003 & Exchange 2000

Posted: 22 Aug 2005 03:42 AM PDT

Thanks for replay!
I wrote from external mail account (hotmail and yahoo).. In the meantime I
could receive mails but just with one user!

If I use another I got the error message: Recipient could not be found in
the system!
I have to map it manually but in this case I have no entries on users
homepage! Exchange Properties CRMEmailEnabled checked - but router did not
work correct.

Perhaps you have some mor ideas...

Best Regards,
Bernd Michitsch



"Matt Parks" wrote:
 

Security roles for support staff

Posted: 21 Aug 2005 12:51 PM PDT

Again, you should create teams. Matt's right, if you assign a record
to a new owner, the old owner will still have access to it. But teams
would let you give access to individual records to multiple support and
sales staff (at the extreme, each sale could be administrated by a
complete novel set of users, in a new team created for that purpose.)
HTH,

Dave
-------------------------------------------------
David L. Carr, President
Visionary Software Consulting, Inc.
Main #: 971-327-6944

To download a fully functional trial version of VAST, (Visionary Audit
System Tools for Microsoft CRM), that tracks all changes made to the
Adventure Works Cycle database, visit http://www.vscrm.com/trial.htm

Custom Lead View

Posted: 21 Aug 2005 12:34 PM PDT

Yes, if you create teams and "share" the views with those teams, you
can hide those views from other users. You might want to consider
create "My Reached" and never reached views so that each owner just
sees their own, even if the security model would allow them to see more
(salesperson/manager situation, e,g.)

HTH,

Dave
-------------------------------------------------
David L. Carr, President
Visionary Software Consulting, Inc.
Main #: 971-327-6944

To download a fully functional trial version of VAST, (Visionary Audit
System Tools for Microsoft CRM), that tracks all changes made to the
Adventure Works Cycle database, visit http://www.vscrm.com/trial.htm

double address import check

Posted: 19 Aug 2005 06:43 AM PDT

Dave,

I do agree that version 3 will have a feature to merge two records, but this
is not attached to the import functionality. I could also not find any new
feature regarding the identification of duplicate records.

Ronald Lemmen
Avanade Netherlands

"Dave Ireland" wrote:
 
Subscribe to: Posts (Atom)