Pages

Search

Exchange 2003 OWA and recieving forwarded contacts - Microsoft Exchange

Exchange 2003 OWA and recieving forwarded contacts - Microsoft Exchange

Exchange 2003 OWA and recieving forwarded contacts

Posted: 21 Sep 2005 12:52 PM PDT

Oh yeah...I am aware of that, but i am not sure I believe that in this case.
in OWA, when you create a new contact you use the same form on OWA that this
attachment opened in. Its not that OWA needs some work around to open it up,
it knows what it is and opens it in the correct form. It goes that far, why
just stop there. Your remark would indicate that a user is unable to create
contacts in OWA.

"Ed Crowley [MVP]" wrote:
 

Exchange 2003 on Server 2003

Posted: 21 Sep 2005 12:29 PM PDT

Thanks for your recommendation. If I had found a specific newsgroup for
what I wanted, I would have used just that one. Since I didn't...


"Ed Crowley [MVP]" <org> wrote in message
news:eIJ3$phx.gbl... 



----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Exchange 2003 failed restore

Posted: 21 Sep 2005 10:58 AM PDT

Agree with Ed the DR paper from MS is excellent. From what you describe it
sounds as though you have the transaction files in the wrong place or mixed
with transaction logs from other servers.

PaulB
"Ed Crowley [MVP]" <org> wrote in message
news:uNM8q%phx.gbl... 

This email was sent by Me on Behalf of You....

Posted: 20 Sep 2005 11:09 PM PDT



In news:%23Y$phx.gbl,
Thief_ <com> typed: 

Send on Behalf does that. You can set that (and users can set that) in
Outlook.
Send As, does what you're describing now - Joe sends mail that looks like it
came from Mary. And if Send As rights are set on the server itself (you
can't set this in Outlook) it will override the 'send on behalf of' rights
you set in Outlook.

Check for the presence of send as rights....via users or groups - in ADUC.
 

KB 888619 contains old versions of exchange files

Posted: 20 Sep 2005 08:03 PM PDT

Scott

I'm slightly confused by your response. you state that the files that have
changed are different. When I look I find two files listed in both articles
(store.exe and mdbmsg.dll). There isn't a list of files changed and a list of
files touched.

In short however you state I can install the patch over the one I already
have installed, and the newer files will not be overwritten. Meaning that the
newer version contains any fixes (or touches?) of the earlier versions.

What do you mean by "If people are doing the same thing on the back-end as
they do on the front-end, then the patch can easily go on both."? The hot fix
appears to be a patch for OWA. Are the files used by the backend when using
OWA on a front-end to access your mailbox? "Doing the same thing"?? please
explain ...

John

"Scott Roberts [MSFT]" wrote:
 

Adding E2k3 to replace old E2k3

Posted: 20 Sep 2005 07:11 PM PDT

Assuming the name isn't too huge, can deal with that.
Changing the ip to old server ip would make life easier for me because I
have outside pointing inside with that address. Also, I have many sites in my
domain. We are spread all over. Forest prep could take awhile.
So basically, I am just building a W2k3 server loading E2k3, and in the
setup does it ask if I want to join an exchange org? I can't remember.
Last, when I do mailbox move, space will be a concern if data will be added
to the OS disk. If it is the raid 5 set where info store is no problem. I
just don't know which it is?

"Bharat Suneja" wrote:
 

Allowing users to modify distribution lists

Posted: 20 Sep 2005 04:45 PM PDT

Certainly, you can use Delegation wizard in AD Users & Computers to delegate
permissions to change particular user attributes to one user (or Security
Group, just make user member of that group, less hassle when the user leaves
and someone else takes his/her place), and then create a custom MMC to only
include the OUs/Containers that have users.
--
Bharat Suneja
MCSE, MCT
--------------------------------

"Brad" <microsoft.com> wrote in message
news:com... 

E2K3 Server Specs

Posted: 19 Sep 2005 04:35 PM PDT

thanks for your help :)

"Bharat Suneja" wrote:
 

OWA E2K3 Frontend E2K Backend Licensing

Posted: 19 Sep 2005 12:09 PM PDT

For Exchange 2000, Enterprise Edition is required for the front-end.
Standard Edition is supported for the back-end, but you will be limited to a
single 16GB maximum mailbox store.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Dieter" <microsoft.com> wrote in message
news:com... 

How to send a Welcome mail & letting users change password through

Posted: 19 Sep 2005 05:19 AM PDT

There is a mechanism in Outlook 2003 to deliver a welcome mail when Outlook
is installed, but I agree that there is no standard way to do this in
Exchange.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Bharat Suneja" <org> wrote in message
news:phx.gbl... 

Cannot read Thai message from yahoo.com

Posted: 19 Sep 2005 12:18 AM PDT

Dear Sir,

When external users have typed messages in Thai and sent using yahoo mail,
the exchange users cannot read them which the characters are suspicious. I
asked other people for this problem they found the same.

Thank you for your kindly help
Sathit

"Ed Crowley [MVP]" wrote:
 

Free Exchange based web mail?

Posted: 18 Sep 2005 02:59 PM PDT

Mark Arnold [MVP] <org> wrote:
 

Yes, but do you know of any provider of free web based e-mail that uses
Exchange (or maybe Open eXchange or whatever it is called) for it? For
example, a lot of the smaller players use Outblaze. Do you anywhere I
can get free e-mail account where they use Exchange as the server?
 

Don't worry about that. As soon as I find an Exchange-based e-mail
service that supports Outlook's addressbook syncing/sharing I can work
out this myself.

--
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?

archiving

Posted: 18 Sep 2005 02:55 AM PDT


 


Thanks for the reply -I will start archiving from now then.

Thanks for this


David

p7s attachements

Posted: 17 Sep 2005 03:36 AM PDT

"test333" <com> wrote:
 

The ".p7s" file extention is the PKCS #7 signature file. The MIME type
for a file of this sort should be one of these:

application/pkcs7-signature
application/x-pkcs7-signature
application/keychain_access
 

Well, that may be understandable. If the MIME Content-type is
different to the ones above the client should be able to work with the
attachment, but Outlook (being an application) may have different
ideas about that.
 

So it's not an Exchange problem, but an Outlook problem.
 

Yes, that's correct. But when you look at the MIME types for the
different body parts, what are the "Content-type" values for the
different ".p7s" attachments?
 

Sure. Have the chose a different extension for the attachment. They're
certainly free to use anything they like (they could even use .exe or
..com, but that would probably be an even worse choice!), but when they
do so they should be careful to select something without a widely
accepted meaning that differs from the intended purpose of the file.

--
Rich Matheisen
MCSE+I, Exchange MVP
MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm
Don't send mail to this address mailto:com

SBS 2K3 Exchange & Vmail

Posted: 16 Sep 2005 09:46 AM PDT

Perhaps you ought to have your Exchange server hosted by somebody on the
other side of your unreliable T1 line, or perhaps you ought to have a backup
network link. Commercial DSL is pretty cheap in most places. I think
either of those suggestions is far less kludgy than your line of thinking.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Workwithcisco" <microsoft.com> wrote in message
news:com... 

user name resolution

Posted: 16 Sep 2005 04:58 AM PDT

The given name does have all three attributes checked within the schema.
After further test I have checked our old 2k enviroment and using 'check
names' when using only the first name does return a list of all relevant
people within the gal but our new 2003 does not. For example If i wrote
'richard' in the to field then hit check names our old (2k) exch would
return about 10 names. Some would be richard smith, richard cooke, richard
jones others would be debbie richardson alex richards etc etc. The new 2k3
exch would simply show debbie richardson alex richards etc etc. Does this
shed any more light on the issue?

Thanks in advance

Craig


"Ed Crowley [MVP]" <org> wrote in message
news:phx.gbl... 

Exchange 5.5 Export - need to see all smtp addresses

Posted: 15 Sep 2005 02:00 PM PDT

Thanks. Your tip worked. Was in KB153028.


"Ed Crowley [MVP]" <org> wrote in message
news:phx.gbl... 

EXCHG SRVR PROB: unable to open outlook window

Posted: 15 Sep 2005 12:20 PM PDT

Turns out that dns pointed the netbios name to totally different ip address.
TY for your help

"Ed Crowley [MVP]" wrote:
 

exchange 2003 IIS default settings

Posted: 15 Sep 2005 09:19 AM PDT

Thank you very much. The instructions worked. There was one additional step
that was taken.
Under the 'Default Web Site/Home Directory/Configuration/ASAPI CACHE'

We checked this item and restarted IIS and everything starting working

thx jason
"Mr Beaton" <com> wrote in message
news:phx.gbl... 

Public Folders over VPN

Posted: 15 Sep 2005 08:30 AM PDT

Are the public folders on a different server than their mailboxes?
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"RussW" <microsoft.com> wrote in message
news:com... 

Odd things happening with Exchange...What steps can I try?

Posted: 15 Sep 2005 05:21 AM PDT

On Fri, 16 Sep 2005 08:42:57 -0500, "SA Dev" <com>
wrote:
 

Right click it , select dismount.

Restoring a Storage Group after of remove a server

Posted: 15 Sep 2005 05:19 AM PDT

That's right, but when you have to restore a storage group of removed server,
and you use the REcovery Storage Group, you have to specify the same storage
group. Even, after restore restore the storage and you use Exmerge to restore
a mailbox, it doesn't work if the user mailbox is not move to the original
storage.

Thanks

"Kashif Awan" wrote:
 

Help needed - urgent

Posted: 14 Sep 2005 05:12 PM PDT

On Wed, 14 Sep 2005 20:01:03 -0700, ccd
<microsoft.com> wrote:
 

http://support.microsoft.com/?kbid=274343
"How to Recover a Deleted Mailbox in Exchange"



 

Junk E-mails

Posted: 14 Sep 2005 04:10 PM PDT

Yeah, it's pretty crazy, I've never seen this before.

What type of "system" do you recommend?


"Jim McBee (MVP)" wrote:
 

Microsoft Word - Where has the clip art gallery gone?

Microsoft Word - Where has the clip art gallery gone?

Where has the clip art gallery gone?

Posted: 30 Nov 2013 03:09 PM PST

I have always linked straight to the gallery from within a program, eg Word by clicking on the Clips online link.  Now when I click it all I get is the main office.com homepage but if I click on Images it does not take me to the gallery but to an article which is no help at all.

 

Where have all the images gone?

 

Mandy

Microsoft Word 2013

Posted: 30 Nov 2013 02:38 PM PST

No matter what I try I cannot change the color of my text on the screen.   Using the font format command doesn't work - my font is still black.
I'd be most grateful for some help.
Peter Boyle

Word shutdowns my doc and I get a "Word cannot open file" message after

Posted: 30 Nov 2013 11:56 AM PST

I have been working on a large word document and it has shutdown unexpectedly without warning. When i try to reopen the document i get  the message"The file cannot be opened because there are problems with its contents" Details: The name in the end of the tag of the element must match the element type in the start tag. Location: Part: /word/document.xml, line 2, column 3846793"


Where is reveal codes?

Posted: 30 Nov 2013 11:55 AM PST

I have just finally updated to Office 2013. In my old version there was a way to reveal the formatting code with in a document. Where is it now?

Separate headings for endnotes pages

Posted: 30 Nov 2013 11:51 AM PST

I've written a book with endnotes using World 2010 on a Windows 7 system. Following the directions of http://word.mvps.org/faqs/formatting/FootnoteFAQContent.htm#TextAfterNotes I successfully inserted sections following the endnotes pages. But I've had trouble with the header for the pages containing the endnotes.

The endnotes appeared immediately after the text of the final chapter. Since that would be confusing, I set the section containing the final chapter to "suppress endnotes" in Page Layout|Page Setup|Layout and then at the end of the chapter text inserted a Section Break (Odd Page) code. This moved the notes to the next odd page.

However, I have a running header on the odd-numbered [facing] pages that shows the name of the current chapter. Of course I take care that "Link to Previous" is unchecked for odd-page headers in the Header and Footer Tools|Design tab. But even so, the notes pages had the name of the last chapter, and their header was linked to its and could not be independently changed, which was not what I needed.  

I decided that I would try inserting an extra blank section between the end of the final chapter text and the notes pages. This was difficult because Word always makes what seem to be arbitrary changes in the Section Break codes in complicated situations involving several different codes. What I finally wound up with was:

--End of chapter text
--Section Break (Continuous) code
--Blank line
--Section Break (Continuous) code (I think this is unnecessary, but Word won't let me delete it.)
--Section Break (Odd Page) code
--Section Break (Continuous) code (I think this is unnecessary, but Word won't let me delete it.)
--"Notes" title
--Section Break (Odd Page) code
--endnotes pages
--New section in which to insert bibliography and end matter

Each of the sections up to the "Notes" title was set to "suppress endnotes". It was only immediately after the "Notes" title that I unchecked "suppress endnotes".

At the blank line, I inserted page breaks (not section breaks) until I got to an odd page. I edited its header to uncheck "Link to Previous". Then I deleted all of the page breaks, leaving me with a section having just a single blank line between the end of the last-chapter text and the "Notes" title section. Then in the endnotes pages I was able to change the odd-page header without affecting the header in the last chapter.

The next time, doing it from scratch and not having to fight with Word so much on changing Section Break codes, I would try the following order:

--End of chapter text
--Section Break (Continuous) code
--Blank line
--Section Break (Odd Page) code
--"Notes" title
--Section Break (Odd Page) code
--endnotes pages
--New section in which to insert bibliography and end matter

I'd be interested in any ideas anyone else may have about ways to do this.

Can't color letters on Word 13

Posted: 30 Nov 2013 09:50 AM PST

I block the words that I want to change color. Click on the color selector at the top of the screen. When I run the pointer over the colors on the drop-down, the block shading on the text disappears and there is no color change when I click on a color on the drop-down. My system is windows 8, but I use the Windows 7 desktop display.

Surface RT how to open a wps file

Posted: 30 Nov 2013 09:17 AM PST

Is there a way to open a wps file on the surface rt?

Office 365 error (Word 2013)

Posted: 30 Nov 2013 08:37 AM PST

Hello,

MS Office 365, especially MS Word 2013 is crashing quite often when opening a file. But that's not the worst - after restarting, Word offers you some recovering options and there is an error with data: Available Files, name, version created ... 01.01.1601. 2:00 (that was 5 minutes, not 412 years ago).

microsoft office help viewer not responding (office 2007)

Posted: 30 Nov 2013 07:27 AM PST

When I click on the question mark in the upper right hand corner for help in word 2007 I get the help window with the table of contents .  When I try to enter in the search field I get no response. When I clic on the links in the table of contents, I still get no answer. The problem is the same for Excel and PowerPoint

I use Windows 7 64 bits.

I have tried to repair Office via panel control a few times with no impact in solving the issue. I also tried to rename the Microsoft Help files in Program Data and still no impact in correcting the situation.

I am still looking for solving the issue.

File Directory - All Caps

Posted: 30 Nov 2013 03:12 AM PST

Hello Gurus: 


I have a series of files in a file  directory which have been named  (by someone other than myself) using  all capital letters.   From a purely  aesthetic standpoint, I would like use a Word macro  to change all listed filenames within the file directory to  initial capitalization. 


Assuming that this is even possible, I would greatly appreciate  some assistance  in this regard.


Thanking you in advance for any insight, I remain...


Gratefully yours,


Mitch

Background Color

Posted: 30 Nov 2013 02:44 AM PST

I changed my desired page color in word 2007, the entire page got colored but when i printed it, the color border was uneven. As a result some part outside the  page border remained discolored while some part colored which is not desired so either tell me how to get a full page color printout or how to color within the border set for an A4 sized sheet.

 Eagerly waiting for response!!

Pipe symbols appearing intermittently in a large Word document (2007 & 2010 both versions)

Posted: 30 Nov 2013 12:40 AM PST

I have a large word document (about 140 pages). The problem I have is that Word keeps placing a pipe ( | ) symbol throughout the document. The pipes seem to act as a page break, but there are no other 'invisible' symbols like paragraph marks, etc., and using the menu to show invisible characters has no effect on the pipe symbols.

 

I can select them individually, but I can't copy / paste them into the search/replace tool, and there are several hundred instances, and new ones appear as the document grows. They appear intermittently, with no real rhyme or reason as far as I can see. Also, copying a small part of the document with the pipe symbols to a new file has no effect either.

 

Does anyone know WHY these pipe symbols are appearing, and HOW to work with them and remove them permanently? I have attached an image that shows the symbols on a random page.

 

Note: The document is a personal spanish / english dictionary, but I do not think the language is part of the issue.

 

Any help would be appreciated.

Thanks

Roger

 

Letter spacing

Posted: 29 Nov 2013 10:42 PM PST

A font I am committed to has crowded letter spacing, especially in small caps. Is there a way to put a small space between adjacent letters?

Auto Complete for Dates Not Working

Posted: 29 Nov 2013 07:32 PM PST

I use Microsoft Office and Word 2007 and I.E 9 in Vista Home Premium.  After doing some "fixes" for other issues, I lost the feature of Auto Complete for dates.  I tried to restore to an earlier time and that did not fix it.  I also checked the AutoComplete in Internet Options and ran Malware. How can I restore the Auto Complete for dates?


Thanks,


Jerry

Typo in Slovak localization of Word 2013

Posted: 29 Nov 2013 04:47 PM PST

Hello,

I have found a typo in Word 2013 with Slovak localization.


When I press Ctrl+F (search) and type "x", the search finds too many results so it does not display them. This is ok, no problem.

The problem is with the message I get about it: "nAk chcete vysledky..." There is letter "n" which should not be there. Other parts of the message are ok, it's just the letter "n" is not correct and I consider it as a typo.

Office 2007 shortcuts

Posted: 29 Nov 2013 03:39 PM PST

Who had the brilliant idea of changing the old so common shortcuts? How come my save command is now ctrl+F12 instead of ctrl+S, how come my ctrl-Z is now alt+BACK ??

And most importantly - How do I change it back??

Word 2007 in envelopes not printing post code

Posted: 28 Nov 2013 12:36 PM PST

Microsoft word 2007 when printing enverlopes  leaving the post code off

Microsoft Word - Why are my CDRW's read only and how can I edit them

Microsoft Word - Why are my CDRW's read only and how can I edit them

Why are my CDRW's read only and how can I edit them

Posted: 29 Nov 2013 02:11 PM PST

Why are my CDRW's read only and how can I edit them

accidental save over

Posted: 29 Nov 2013 12:48 PM PST

I acidentally saved a new virtually blank file over another fie which I had been woring on all day.  Is there any way I can recover the other file. I'm using word 2010. Ive lost 17pages of work.. Any help appreciated

Microsoft won't let me open downloaded documents!!!!

Posted: 29 Nov 2013 10:28 AM PST

So I have always downloaded documents from my school website and saved them.  For some reason now when I try to download documents or try to open saved documents that I previously downloaded window tells me "the document may be read only, or encrypted." or it also will say "cannot access document anymore as it may be locked, or corupted".  Help I really need these documents for school.  Also I tried using my roomate's computer and the documents download fine on hers and at the school.

I am the administrator but my Word CD'S are Read Only. How can I edit them

Posted: 29 Nov 2013 10:00 AM PST

In addition to CD's being read only, very often I cannot edit a document on my hard drive.  When I close it and reopen it I can edit it.  What is the problem.

Word 2013 Poor Font Rendering

Posted: 29 Nov 2013 09:42 AM PST

Just upgraded to Office 2013 from 2010 at work. I've made sure that Office 2013 has been updated.


I noticed that documents looked terrible in Word 2013 whereas they had looked fine in 2010.

Then I found that while font rendering in Word is poor, Excel is fine just as it was in 2010!


Here is an example.

Note how:

1. The word Hello is rendered differently in Word compared to Excel

2. The text AaBbCcDd is rendered differently in the Word document compared to the ribbon in Word

When a full document is viewed in Word 2013, the effect of this difference makes the document horrible to read.


If you zoom in on the image, it appears that Excel correctly uses ClearType with sub pixel rendering whereas Word does not and seems to use some form of grey scaling which looks terrible.


I've tried various advanced display options in Office 2013 including the one about using sub pixel rendering and hardware acceleration. None of them cause Word to correctly use ClearType.


Word 2013 is therefore incorrectly rendering the fonts in the document causing a very poor result which makes the document noticeably more difficult to read than any other text rendering in Windows or previous versions of Word.


There are some other threads which may be about this issue but still no resolution. I have put this clear example together to highlight just how obviously wrong Word 2013 is and therefore why this issue needs to be corrected.

How on earth do I get support from someone at Microsoft? I have an office 365 subscription, but try as I might . .

Posted: 29 Nov 2013 09:00 AM PST

. . I can't find a way to get help. Admittedly, I've found this box, but my hope of getting real support from someone at Microsoft is low. Microsoft, prove me wrong!

The problem (apart from being unable to contact support) is as follows. In Word, the busy pointer - the circle - appears nearly always when I navigate within the document (by pressing the cursor keys). This is irritating and I suspect it is not by design. I have a powerful, clean computer, and I don't think the problem is (as the web suggests it often is) with the printer driver. I'll supply more details on request. I look forward to hearing from you.

Printing specific pages in a merged document

Posted: 29 Nov 2013 08:39 AM PST

I created a merge document and have saved the file.  I am able to print the entire document, but unable to print "current page" or a selected number of pages, ie: 1,5,9,13.  I have tried different printers and computers to no avail.  Can anyone suggest a fix?  Thank you

List Justification problem in Word

Posted: 29 Nov 2013 04:11 AM PST

I often create documents which are primarily lists where I want to format using Word bullets or numbering with a 'heading' line followed by the 'details' starting on the following line.  To do this you have to use Ctrl+Enter to avoid the 'heading' being a separate number from the 'details'.  This is OK until you decide to Justify the text as then the 'heading' is justified, which looks awful.  For example: 
Apart from making every 'detail' section a sub-para I can't find a way of doing this.  Can anyone else help?

Workflow in Word and OneNote

Posted: 29 Nov 2013 03:03 AM PST

Hello all.

There's something I've been wondering about regarding my workflow in Microsoft Office.

Let me describe what I'm currently doing.

I'm preparing for an exam as a guide of a certain route. I'm going through a document I previously collaborated on with my co-students and translating each of its 30 different segments into the language I'll be taking the exam in. I'm also jotting down summaries and key figures for each leg.

Originally I started out working on each segment separately, each on its own Onenote page. I haven't used Onenote before and figured it'd be relatively easy to tag the texts somehow and then make Onenote export Word documents based on the tags (one with the translations and one with the summaries). This would mean I could reuse my work easily going forward, re-ordering the Onenote pages with searches and combining them with new ones for other different routes once I actually started working as a guide.

It's becoming clear that the program doesn't actually support this.

So I think my strategy will be to just have three different Word files open simultaneously on my screen and switching between them. This is okay but it won't really be the start of the database I was so looking forward to. In the future I'll have to go through these files and manually cut and paste them into new documents, also there'll be no connection between the file with the full texts and the file with the summaries. This is daunting because on my computer I've already got hundreds of different files by myself and others with various types of information; it'd be so very useful to be able to query them based on tags, and to have unprocessed information separate from the info I've gone over and made summaries of, &c.

Is there anybody on here who's faced and solved similar problems?

Thanks for your time.

MS Office 2010 has been set back to MS Office 2007

Posted: 29 Nov 2013 02:48 AM PST

Me again, further to the earlier problem I have now also noticed that my entire MS Office 2010 has been miraculously set back to MS Office 2007 with the effect that I can't open or work with any of my files - HELP :(

OLD MSOFFICE2007 DATA NOT OPENING

Posted: 28 Nov 2013 11:39 PM PST

Dear Sir/ma'm,

 

Few days back suddenly my whole MS-Office2007 data/files has not been opening.All major files were in MSWORD.A window is opening while clicking the file

which is attached herewith.But new created files are opening thereof.

Please help us what to do.

window is shown above for you to understand the problem.

 

Regards

 

Shailendra Singh

 

How do I insert an envelope at the END of a document instead of the beginning (Word 2010)?

Posted: 28 Nov 2013 06:52 PM PST

When I use ADD TO DOCUMENT, no matter where my cursor is, the envelope is added at the beginning of the document.  The only way I seem to be able to get it at the end of the document is to set it up from scratch.  I have tried to copy and paste the format from other documents which miraculously have their envelopes at the end of the document, but no amount of coaxing using paste options will make it work.

Would appreciate any help.

Regards, Michelle

Looking for specs on the "Frame" theme.

Posted: 28 Nov 2013 05:02 PM PST

Hello, im doing a project for school that requires the "frame" theme but i dont have it on my word version at home or on this handy mac so i would like to recreate it, if anyone could help out that would be great!

Word 2013 insufficient memory to update the display

Posted: 28 Nov 2013 03:40 PM PST

Hi everyone
When I open a certain document in Word 2013 (not all docs, just this specific one), Word says "There is not enough memory or disk space to update the display". I can open the doc but I am having lots of trouble editing it - Word crashes, fails to save, etc.
I am working on Windows 8, with Word 2013. I have only had this computer 3 months, so there is plenty of memory and disk space on the computer.

Any one had this problem? How does one sort it out?

System Restore Tool Issues - Microsoft Office forums

System Restore Tool Issues - Microsoft Office forums

System Restore Tool Issues

Posted: 27 Nov 2005 12:23 PM PST

There is no such thing as Office XP Home Edition, so I'm guessing
that "XP HE vs2002 SP2" refers to Windows XP Home Edition with
Service Pack 2. That does not tell me what version of Office you
have. See http://support.microsoft.com/?kbid=295823 "You receive
the 'This patch package could not be opened' error message in an
Office program".

CED wrote:
 

Re-Activiation

Posted: 25 Nov 2005 09:01 AM PST

Brian-

Thanks for the quick reply!!!!

I figured I may have to call, but since it is so easy to activate on line, I
will try that first. Thanks again.

- Joe

"Brian S. Bergin" <nospam> wrote in message
news:com... 

Small Business Accounting SQL setup fails

Posted: 25 Nov 2005 08:58 AM PST

Brian,

I've run into problems like that with MSDE before, but I don't remember the
solution other than it involved some manual removal of MSDE bits, possibly
in the registry. Try posting the question to
microsoft.public.sqlserver.msde.

Paul Riemerman

"Brian S. Bergin" <nospam> wrote in message
news:com... 

Office 2003 setup on Win XP - fails on DoDialogSequence

Posted: 24 Nov 2005 05:43 AM PST

1) This is not an upgrade version, but a full retail version of Office 2003 Pro

2) I am not trying to install on top of Office XP. The former Office version
on this PC was the 2K version, which already is uninstalled from Control
Panel Add/Remove Software.

I have tried to clean this PC of all known traces of the old version (based
on the advice that an upgrade from 2K to 2K3 does not always work that
well...).

J.

"Peter Foldes" wrote:
 

How can I print from my wireless laptop to my home printer?

Posted: 23 Nov 2005 08:43 PM PST

See:
http://www.practicallynetworked.com/qa/qa20030619.shtml
--
Cari (MS-MVP)
Printing & Imaging



"Dana" <microsoft.com> wrote in message
news:com... 

Uninstall Office elements

Posted: 23 Nov 2005 07:15 AM PST

Control Panel->Add/Remove Programs->Microsoft Office.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
reading.

After furious head scratching, msf asked:

| Then how do you do it?
|
| MSf
|
|
| "Milly Staples [MVP - Outlook]"
| <org> wrote in
| news:phx.gbl:
|
|| Yes.
||
|| --
|| Milly Staples [MVP - Outlook]
||
|| Post all replies to the group to keep the discussion intact. All
|| unsolicited mail sent to my personal account will be deleted without
|| reading.
||
|| After furious head scratching, msf asked:
||
||| I would like to uninstall elements of Microsoft Office 2003 and just
||| leave the programs I want etc.. Word, Excel, Powerpoint..
|||
||| Is it possible to do this?

MS Office 2003 installation disk corrupt

Posted: 22 Nov 2005 09:56 PM PST


What error message do you actually get?



Office user wrote: 

I lost my cd key. How do I obtain a new one.

Posted: 22 Nov 2005 09:09 AM PST


Heve you got it installed on your system? If so then download a tool
from this link and run it to get your CD key:

http://www.magicaljellybean.com/keyfinder.shtml

hth


Qtip wrote: 

automating footer?

Posted: 22 Nov 2005 07:27 AM PST

Thank you, I'll start there. It would be good if I could set all users to
use the modified normal.dot from a central location . But I also have to set
excel files the same way so this may be more complicated than I thought...
like educating the users... geez, who am I kidding!?

"Cindy M -WordMVP-" <ch> wrote in message
news:.. 

can I download office 03 and power point on windows XP free?

Posted: 20 Nov 2005 08:08 PM PST

Also it might be a good idea for your business to get a good Spell Checker.

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"dummie @ business" <microsoft.com> wrote in message news:com... 

Moving an Office 2003 Admin Install Point - what will break?

Posted: 18 Nov 2005 04:10 PM PST

I believe I've found a workable solution for my dilemma. If I simple
reinstall Office 2003 from the new server, over the existing Office 2003
installation, it populates the SourceList on the client with the new source.
Not elegant, but it will do the trick.
--
Sandy Wood
Orange County District Attorney


"neo [mvp outlook]" wrote:
 

Install MS Office 200 Premium

Posted: 16 Nov 2005 07:12 PM PST

I think I found the source of problem.
I suspected the Notton Antivirus (2005) somehow interfered with my XP Media
Center edition. So after re-installed the original software on the computer
as shipped, I removed the Norton, and installed MS Office 2000 without any
problem.
Thanks for the reply post anyway.
PhanLt


"phanlt" wrote:
 

Blocking a set amount of time each day for a resource Microsoft Project

Blocking a set amount of time each day for a resource Microsoft Project

Blocking a set amount of time each day for a resource

Posted: 18 Jan 2005 01:33 PM PST

Ahhhh - that's what maximum availability is all about. Try this - let's say
he works 8 hours a day. The 4 hours a day he's on troubleshooting isn't part
of his project work at all, really, so as far as the microcosm of the
project is concerned the only thing that counts is how much time he *could*
devote to project related work. From a project management perspective we
really don't care what else it is he's doing, only that the time it requires
is time not available to the projects and so as far as we're concerned that
time simply doesn't exist. In other words, he's only available for
assignment to projects for 50% of his workday and if his calendar represents
his full workday (as it should, IMO) that can be represented in Project as a
maximum availability entry in the resource sheet of 50%. He's available to
the project 50% of his time and not available (because he's doing who cares
what, let his boss worry about that) the other 50%.

Some people think I'm a broken record but MS Project is not the end all and
be all for business management, even in project oriented industries. It's
an extremely valuable tool for doing what it is designed to do - help manage
projects - and marginal for the other activities people sometimes try to
adapt it to. It's not intended to help you manage staffing and/or
production, only to help you schedule the work on, and specific to, your
projects.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



"nopcworries" <microsoft.com> wrote in message
news:com... 

How can I enforce zero lag time when levelling?

Posted: 18 Jan 2005 11:25 AM PST

Jan,

Thanks. I had been playing around with Priority; I was wondering if
there was a more "correct" way to solve this one.

- Mike

Fixing Dates Absolutely - Lock Possible?

Posted: 17 Jan 2005 10:51 PM PST

Step back and think about it a minute. You're asking how to lock start and
finish dates and then you say you want to revise the duration. The duration
is defined as the time between the start and finish. How could it possibly
change without at least one of either the start or the finish changing? If
a task starts Mon 8am and finishes Thu 5pm, its duration is 4 days - it
can't be 3 and it can't be 5 - because there are 4 working days, no more and
no less, between the start and the finish. If you change the duration to 5
days the finish HAS to change to Fri evening because Fri is 5 days after
Mon. It's simple arithmetic - 5+2=7, never 6 and never 8.

The same thing happens when you assign resources. Joe works 8 hours a day
and has certain days off. Work only takes place on a task when the
resources assigned to it are there to work on it. So if I have task that
requires 40 hours of work, scheduled to start on Monday and finish on
Friday, and I assign Joe to do it. BUT Joe is happens to have Tuesday and
Wednesday off and is taking a vacation day on Thursday. That task still
requires 40 hours of work to be done, but Joe is only going to be there on
Mon and Fri, a total of 16 hours. When could he do that additional 24 hours
worth of work? The only time possible is sometime after Friday and so the
projected finish date of the task must change to accomodate the time off.

Now, if you want to lock those dates because you need to preserve the plan
as it was originally devised before starting to track progress while
retaining the original start/finish dates so you can compare actuals with
intended, that's another matter. That's the purpose of the baseline and
saving a baseline does exactly that - gives you a copy of the plan "locked"
so that when you edit the durations etc in the working plan to enter in what
actually happened so that you have a record of both planned and actual. But
you said in your question "...shouldn't be moved when I assign resources
...." and you should be assigning the resources long before you save the
baseline to lock things down. You lock down the baseline as the very last
step in developing the plan before you begin work but all the duration
estimates entered and the resources are assigned, etc, well before that
point. While you're building the plan, editing duration estimates and
assigning resources, it really must recalculate those dates in order for the
plan to be valid.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Lambs" <microsoft.com> wrote in message
news:com... 

general newbie questions about MSP concepts

Posted: 17 Jan 2005 07:05 PM PST

Adding a comment to Rod's answer. A Finish No Later Than constraint is NOT
how you indicate the desired deadline finish, IMHO. You know deadlines -
while you need to hit them, sometimes things conspire that make it
impossible, right? Well, a FNLT constraint tells Project never to place
that task in the timeline later than the indicated date, EVEN IF IT IS
TOTALLY IMPOSSIBLE FOR IT TO HAPPEN ON OR BEFORE THAT DATE! There is a
deadline entry in Project that allows you to flag where your task should hit
and if it turns out you're going to be late, it'll red flag it for you to
let you know you have to do something to fix it. But by avoiding the
constraint Project shows you where it really *is* going to land according to
the current plan and by comparing that to where it should be landing, you
have a chance to revise the plan so as to meet your objectives before its
too late to do anything about it except apologize to the client/boss for
missing the deadline.

IMO, predicting where you *will* end up IF you structure the plan in a
certain way is even more important than recording where you should be ending
up. You already know what you need to achieve - the hard part is figuring
out exactly how to get there and MS Project's greatest value is as a
calculator to help you do just that. Constraints of any sort applied
anywhere except the few specific places they're needed for the model to be
valid cripple Project's ability to do that for you because they limit its
ability to calculate the effects when you change the causes.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Mike Project User" <microsoft.com> wrote in
message news:com... 

Working from "End Date"

Posted: 17 Jan 2005 04:45 PM PST

Jack has told you how but there're a couple of things you should be aware of
before actually doing it the way you propose. The most important is that
scheduling from a required finish date backwards puts all the tasks as late
as possible in the schedule. That's fine as long as nothing ever gets
delayed but in the real world how often does that actually happen? Since
the tasks are already scheduled as late as they possibly could be to finish
up before the required date, ANY delay in completion of any one of them will
blow the schedule and you won't meet the required deadline date. While
scheduling backwards is ok as an academic exercise in the initial part of
the planning to help you figure out the minimum time that might be required,
you're far better off picking a date ahead of the last possible start date
and creating the actual work schedule from that date forward so that you
have a "cushion" at the end to absorb the inevitable glitches and delays
without blowing past the required class start date. As an instructor myself
I can attest it is extremely embarassing to have to explain to a classroom
full of students that the courseware didn't make it in on time and we'll
have to mail it to them when it arrives.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



"Maxime Maugeais" <microsoft.com> wrote in
message news:com... 

How to I print to a file from MS Project 2003 Professional? No "p.

Posted: 17 Jan 2005 02:11 PM PST

If you're trying to do this so you can send readable files to other users,
your best bet is to print to a PDF generator like Adobe Acrobat or one of
the freeware/shareware PDF writers.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"golfr8999" <microsoft.com> wrote in message
news:com... 

Baselines and Actual Starts/Finishes

Posted: 17 Jan 2005 02:01 PM PST

Thanks guys. My company is not using MS Project as it was designed. They are
using it as an on-going scheduling tool which makes my job very difficult.
Thank you both for your comments.

Regards,
Brad

"Steve House [MVP]" wrote:
 

Progress Lines - Right or Left Peak?

Posted: 17 Jan 2005 12:43 PM PST

Thanks Steve. I probably should have added in my post that the status date
was retroactive and not the current date. A better term might have been the
'progress line date'.

I get this now. Many thanks to you and Gerard.

"Steve House [MVP]" wrote:
 

Master Project size

Posted: 17 Jan 2005 08:59 AM PST

Your master file can contain 998 consolidated project files, each of which
can have a maximum of 1 million tasks.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Lonie" <microsoft.com> wrote in message
news:com... 

How are date links identified?

Posted: 17 Jan 2005 02:29 AM PST

Yep I see that too - I tried it with only one link and it must have been the
luck of the draw that mine said "Project1!LINK_3" and the task that supplied
the date just happened to be Unique ID #3.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"Roy" <fr> wrote in message
news:eT0YfnJ$phx.gbl... 

Custom field content is not populated in peer sub-project

Posted: 16 Jan 2005 01:47 PM PST

No problem. I ran into this problem in the past.

--
-Jack ... For project information and macro examples visit
http://masamiki.com/project

..
"Joel A Feldman" <microsoft.com> wrote in message
news:com... 
task 
all 
project 
you 
about 
task. 
dummy 
a 
message 
Project 
identical 
the 
whole 

Risk/Issue Management

Posted: 16 Jan 2005 08:15 AM PST

Hi Django,
I've done this by using a series of 'customiseable
fields' to store risk/issue information. First define the
fields you need, then define a new view (table) to show
these fields, and finally create a custom report.
Cheers,
Peter. 
Standard to manage Risks and 
version. But I am using 
this as you have 
larger product and 
function of 
to manage risks 

Help requested to display working time only - Project 2000

Posted: 16 Jan 2005 03:37 AM PST

I understood Sparky to want to have non-working days completely omitted from
the timescale. You method does in fact only schedule tasks on Saturday and
Sunday but it doesn't actually remove M-F from the display alltogether. By
the way. instead of chagin the colours for the weekend dates, a better way
is to use the newly created weekend work calendar to also control the
display on non-working days in the timesscale, set on the same page where
you change the colour of non-working days. Now it would show Sat and Sun as
normal work days and Mon-Fri with the grey, non-working background colour.

Steve House[MVP]


"Colin D." <com> wrote in message
news:rbDGd.8809$bellglobal.com... 

Upgrading Project 98 to 2003 from SQL 7 DB to SQL 2000 DB?

Posted: 15 Jan 2005 03:21 PM PST

I think you're dealing with several independent issues here. I'm not
experienced using SQL Server to store the project data but I understand the
Database Upgrade utility you're referring to updates the database tables,
procedures etc, in SQL Database so they include the new fields, field sizes,
etc, found in P2003 that are different from those in the P98 database
tables. It deals with the differences between P98 files and P2003 files,
not the differences between SQL Server 7 and SQL Server 2003.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"ABW" <microsoft.com> wrote in message
news:com... 

MS Project queries

Posted: 15 Jan 2005 01:31 PM PST

In my opinion Project is superior to Ace Project because of VBA (Visual
Basic Algorithmics) which lets Project interact with other microsoft
applications seamlessly.

Using VBA you can easily embed project files in an application such as
powerpoint so that the user doesn't even know they are using project.

It also serves as a visual editor (WYSIWYG) for reports of all kinds from
both project files and project databases.

--
-Jack ... For project information and macro examples visit
http://masamiki.com/project

..
"Steve House [MVP]" <send.hotmail.com> wrote in
message news:%2303Itw8%phx.gbl... 
case 
i 
the 

late dates

Posted: 14 Jan 2005 12:31 PM PST

Typically one wouldn't schedule as late as possible except to get an idea of
what the latest possible schedule would look like.
If I want the "need" date, I just look at late finish. There is no need to
put it in the baseline. In fact it may screw up the baseline. Personally, I
wouldn't do it, but I know less about your situation than you do.
If you have to paste it somewhere why not paste late finish into deadline or
one of the date fields?



--
-Jack ... For project information and macro examples visit
http://masamiki.com/project

..
"lorraine" <microsoft.com> wrote in message
news:com... 
fields. 
late 
did 
opposed 
of 
do 
For 
this 
early 
useful 
The 
is 
baseline 
Subscribe to: Posts (Atom)