Pages

Search

Microsoft Word - MS Word 2010 - Using Frames as fixed navigation toolbar with hyperlinks to jump to sections of a doc

Microsoft Word - MS Word 2010 - Using Frames as fixed navigation toolbar with hyperlinks to jump to sections of a doc

MS Word 2010 - Using Frames as fixed navigation toolbar with hyperlinks to jump to sections of a doc

Posted: 12 Apr 2014 03:23 PM PDT

Hi All,

I'm new here but I would really appreciate your help with frames in MS Word 2010. I've searched for a proper answer all over the net but surprisingly nothing is out there.

If anyone has been smart enough to figure out my quandary I would very much appreciate any advice. Here it goes:

 

1. I need to incorporate several word documents into one doc (cca 200 pages)

2. As there will be many pages, to make navigation easier, I want to have 3 frames (left, right and on top) which will be fixed/unmovable while I scroll thru the main page

3. THE MAIN PART: How can I create links/hyperlinks which would be in those frames so when I select them I could skip to targeted section of my main page?

 

I tried by imbedding Table of Content in those frames but it doesn't work because it can't link to anything in the main page. As if each frame is a separate document, independent of other content in the same document.

 

Guys if anyone knows of a solution for this please do share.

 

I would be very grateful for your expert input.

 

Dani

Create a tab navigable document and importing PDFs

Posted: 12 Apr 2014 03:02 PM PDT

I currently use Office 2003 on XP.  My new computer is being built, and will have Windows 8.1, so I will be upgrading to newer version of MS Office, as well.

I'm involved in a lawsuit in another state, and have a mass of documentation to not only organize, but to pass back and forth with the attorneys I'm interviewing, who are hundreds of miles away.

I want to create a sort of virtual case file, organizing all of the various emails, MS Word docs, PDFs, etc into one file, or document.  I image it as the digital version of one of those 12" x 12" file boxes that hold hanging file folders.  

The closest thing I've seen to what I'm looking for is an online catalog, where you can flip though page-by-page, or navigate to the various sections of the catalog by clicking on tabs, or links in th table of contents.

Can I do this in Word 2003?  If not, can I do it in a later version of Word, or Office?  If not, can anyone steer me towards software that will accomplish this?

Thanks

 

error code 30029-4

Posted: 12 Apr 2014 02:52 PM PDT

i just installed office 2013 on my computerand word and excel always close. powerpoint is running well.

what can I do ?

Thanks

double spacing non labels

Posted: 12 Apr 2014 02:03 PM PDT

Although I have tried to alter the spacing , for no apparent reason the labels suddenly appear in double spacing. If I switch to envelopes the spacing is single.

I cannot get them to type in single spacing.  WHY?

 

How do I load a template from my desktop in Word 365?

Posted: 12 Apr 2014 12:33 PM PDT

In Word 365, I'm trying to open a template from my desktop but I don't see that option.  I hit the Word icon in the top left corner, choose new, but then it looks like I can only choose from preloaded templates or I can "search online".  I don't want that, I want to use the template that's already on my desktop.

Office 2013 on Windows7 - Something went wrong!!

Posted: 12 Apr 2014 12:23 PM PDT

My Office Professional Plus 2013 with Project Professional 2013 and Visio Professional 2013 was purchased through my company.  All the applications were working until last week. 

I tried to repair and NOTHING worked. I just get a message "Sorry, we ran into a problem" with error code: 30029-4.

How do I fix this?

Default address in envelope return box

Posted: 12 Apr 2014 12:06 PM PDT

When I create an envelope and I'm asked if I wish to keep the return address as default, I click yes but when I go back to the program to create another envelope, it does not keep the default address. 

Can't open doc or docx files in Word 2013 on Windows 8

Posted: 12 Apr 2014 11:26 AM PDT

I'm taking an online degree program that requires me to download work from other students for critique. Suddenly, I can't open any of these files after downloading. In fact, I can't even open files that I downloaded and had no problem with last semester when I didn't have this problem. It also affects doc files I try to download from the web.  I don't know what changed. None of the other students have this problem and I've called the school help desk, so the problem isn't at their end.

The specific error message I get is "Word experienced an error trying to open this file". It prompts me to try various remedies: check file permissions, make sure there is sufficient memory, etc. None of the remedies apply or work.

I am running Word 2013 on Windows 8. It also affects Excel and PowerPoint, but I work mostly in Word. And I'm not sure if this helps, but my roommate is having the same problem on Windows 7.

This is reaching the point of total frustration and is impacting my ability to do my online work. What the heck is going on?

Word 2013 keeps reactivating 'do not checking my spelling or grammar'

Posted: 12 Apr 2014 09:44 AM PDT

Hi,

I'm doing a piece of writing in Word 2013. For some reason the 'do not check spelling or grammar' option keeps becoming ticked automatically ie. when I untick it and press 'set as default' the change does not last. Could someone please explain what might be the cause of this, thanks. 

Microsoft Office 2013 shape drawing error

Posted: 12 Apr 2014 09:25 AM PDT

Hi.....

I was just deciding to design something for a project and using word to help do it. Unfortunately this was hindered by the shape previews/icons not matching what is drawn. The description box for each is accurate but a bit time consuming to identify the exact shape I want to use. Although I initially noticed this in word,  since tested in excel only to discover the same fault. Has anyone else experienced this? I've got to say I've never had this problem on my old laptop. Any help would be greatly appreciated.

Thank you kindly 

Word 2007 line breaks

Posted: 12 Apr 2014 09:10 AM PDT

I had started to create a document and then saved it to finish at a later time.  When I began typing again, I can only type a few words before a line break drops the text to the next line.  I can't figure out how to let the text continue to the edge of the margin or until I choose to go to the next line.  It's probably very simple, but I can't find an answer. Thank you in advance!!!

How to expand all headings in navigation pane when opening document ?

Posted: 12 Apr 2014 08:19 AM PDT

Is it possible to make Word 2010 expand all headings within navigation pane upon opening of a document?

Thank you!

Serious Type Lag when using Track Changes

Posted: 12 Apr 2014 06:13 AM PDT

Since the last Windows Update it has been impossible to use track changes.

After a few changes typing slows down to a crawl, saving also is slow.

Tried saving local copies, tried saving on onedrive, it happens anyway.

Add-ons are disabled.

Hardware graphics acceleration is disabled.

Happens in .doc and .docx documents, small or big.

I need a fix asap because I am a copy editor and I cannot work.

How do you retrieve Autosave; when it does not automatically pop-up?

Posted: 12 Apr 2014 01:36 AM PDT

I hit the GATEWAY top right corner of a touch-screen to bring out the 'Start' menu; and it then deleted my WORD FILE document; but subsequent actions would not allow the AUTOSAVE to be seen and retrieve the lost file? what actions bring back autosave files to the screen?

Microsoft Office Pro 2013

Posted: 12 Apr 2014 01:14 AM PDT

Microsoft Office Pro 2013 came with my Windows 7 laptup when I  purchases it last year.

Earlier this week, my laptop did an automatic windows update.  Since then I have been unable to access any Microsoft office programs.  All my documents are still here, but Word, Excell and Outlook have disappeared.  Help please.  I have tried Restore, and other fixes on the microsoft website but all to no avail.  How can I fix this.  

WORD 2013 stops working when i try to open a recovered document

Posted: 11 Apr 2014 08:34 PM PDT

Using windows 7, 64 bit.  I am trying to edit a document that was created in WORD 97.  I can edit text but if I try to do anything related to format like put page numbers in footers or put borders around a paragraph Microsoft stops working.  And now when it brings up a recovered document and i open it Microsoft stops working.  one of the messages I got when it crashed because of an attempt to edit the footer was that it couldn't find building blocks.  I've uninstalled WORD, downloaded it again and reinstalled.

microsoft office problem

Posted: 11 Apr 2014 08:20 PM PDT

i received this message " something went wrong error code 30145-27. i dont even know what i did but at some point i found out that my microsoft office had been uninstalled. please tell me what to do?

word or sentence wrapping

Posted: 11 Apr 2014 04:46 PM PDT

Ever since I changed from some old word processor years ago (that I can't recall) to Word, I've never figured out how to wrap a sentence.  For example sometimes when you copy and paste there are extra CR's like the sample below.   In my old word processor I would just select the area to wrap and click on some button to rewrap it and eliminate the extra space.   How do you do that with Word 2010?

Section 1. Total outlays of the government of the United States shall not exceed total receipts of the government

of the United States at any point in time unless the excess of outlays over receipts is financed exclusively by

debt issued in strict conformity with this article

Production Manufacturing Microsoft Project

Production Manufacturing Microsoft Project

Production Manufacturing

Posted: 29 Apr 2005 07:02 PM PDT

Hi Bob,

As you know, Duration is always measured in working time, so if Saturday and
Sunday are non-working days, the default Duration field does not count them.

There is a work around using a custom duration field and a custom calendar.
Create a new calendar (Tools>Change Working Time). Copy the Standard
calendar, name it (I used 7Day) and make Saturdays & Sundays working days.
Then insert a custom duration field ([Duration1] for example) in the task
table. Choose Tools>Customize Fields and select the [Duration1] field.
Click the Formula... button and use the following formula:

ProjDateDiff([Start],[Finish],"7Day")

In the Customize fields dialog box, click the Use Formula option for the
task and group summary rows.

This will calculate the number of calendar days between the start of the
task and the finish of the task using the 7Day calendar. .

Hope this helps. Let us know how you get along.

Julie

"bob" <com> wrote in message
news:com... 

Organizational Help

Posted: 29 Apr 2005 01:36 PM PDT

jhalterm --

You cannot create folders in the Project Server database. To categorize
your projects, you should consider using either custom enterprise Project
fields or outline codes. Hope this helps.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
Denver, Colorado
http://www.msprojectexperts.com
"We wrote the books on Project Server"


"jhalterm" <microsoft.com> wrote in message
news:com... 

New Project

Posted: 29 Apr 2005 11:06 AM PDT

There are about 15 subtasks for each of these 5 tasks. It looks like a huge
ball of string with 300 trucks and numerous lags. I need to allocate all
resources for the tasks, material and labor. A little different from others
I have done.. Looking for ideas... Thanks..

"Doug" wrote:
 

Can I change the Duration field format?

Posted: 29 Apr 2005 09:20 AM PDT

Note that there's also a checkbox to remove the space between the number and
the letter.

--
Reid McTaggart
Alegient, Inc., Houston
Project Server Experts
Microsoft Certified Partner


"Madoc Pope" wrote:
 

Filtering a Resource Graph

Posted: 29 Apr 2005 08:28 AM PDT

Use the FILTER buttom and the given filters. If none of the built-in
Microsoft Office Project 2003 filters meet your needs, you can create a new
filter or modify an existing filter.

On the Project menu, point to Filtered for, and then click More Filters.
To create or modify a task filter, click Task.
To create or modify a resource filter, click Resource.

To create a new filter, click New, and then type a new name for the filter
in the Name box.
To modify an existing filter, click a filter name in the Filters list, and
then click Edit.

Under Filter, click a field name and a test.
In the Value(s) column, type or select a value to test for or set a range of
values by typing two values separated by a comma(,).
If the filter will contain more than one criterion row, select new
conditions on the row immediately underneath the first row, and then click an
operator in the And/Or column of the same row.
Click OK, and then click Apply.

Regards,
---------
Haris Rashid
http://www.manage-systems.com
----------------------------------------

"Angela" wrote:
 

Putting tasks on hold indefinitely

Posted: 29 Apr 2005 07:56 AM PDT

Hi,

This is how the maintenance shop for Mainframe applications at my biggest
customer works.

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"Joe" <microsoft.com> schreef in bericht
news:com... 
the 
task 
that 
other. 
the 
is 
on, 
The 

Project98

Posted: 29 Apr 2005 06:58 AM PDT

I used 2003 before under my employers group license. Since then I have
retired and Windows died. I rebuilt the system and installed my personal copy
of project 98. When i double click, nothing happens. No error or message of
any kind. I have tried repair and uninstall/reinstall many times and it is
the same. Before i spend anymore time on this, i wnated assurance from
someone that it works. MediaCenter should be the same as XP Professional.

"JackD" wrote:
 

Interim Plans

Posted: 29 Apr 2005 12:00 AM PDT

Interim Plans can be saved in MS Project 2003. You can compare an interim
plan with the baseline plan or current plan to monitor project progress or
slippage. You can save up to 10 interim plans. By comparing baseline or
current information with an interim plan, you can track task start and finish
dates only, not work or costs. You can save up to 10 interim plans for each
project plan.

On the Tools menu, point to Tracking, and then click Save Baseline.
Click Save interim plan.
In the Copy box, click the name of the baseline or interim plan with the
start and finish or baseline start and finish values you want to save.
In the Into box, click the name of the interim plan into which you want to
copy the values.
Click Entire project or Selected tasks to save the portion of the schedule
you want.

After saving an interim plan, you can view the plan's start and finish dates
by inserting its fields into the Task Sheet view; for example, if you've
saved three interim plans, you can view the dates saved in the third plan by
inserting the Start3 and Finish3 fields

Using the Gantt Chart Wizard, you can instantly change the formatting of
items such as the critical path, display link lines between dependent tasks,
or select color options and patterns for Gantt bars representing summary
tasks, subtasks, or milestones.

Follow the instructions on the gantt chart wizard and select custom fields
in the gantt chart wizard to display the fields related to the interim plan.

-----------
Haris Rashid
http://www.manage-systems.com


"nholt" wrote:
 

Fixed Work Task

Posted: 28 Apr 2005 02:13 PM PDT

JodyJ,

I agree with and am not sure why both resrouces are not updating. That
really is something I dont' get either.

The reason your units are changing when you change the duration of a task is
because you have fixed work selected. Change your type from fixed work to
fixed units before you change the duration and then the units will stay the
same. Then you will see the hours of work increase or decrease depending on
the direction you change the duration.

"JodyJ" wrote:
 

Baseline Work does not equal Work after baseline has been performe

Posted: 28 Apr 2005 11:58 AM PDT

Hi Chaz
Are you sure you haven't allocated work to a summary task inadvertently?
Easy to do. Insert a resource column to check.

Regards...............Pratta

"chazman" wrote:
 

raise WBS level of task

Posted: 28 Apr 2005 10:06 AM PDT


you're welcome and thanks for the feedback
--
Cheers
JulieD

"Gayle Ann" <Gayle microsoft.com> wrote in message
news:com... 

Interactive filter to show a task and all it's predecessors

Posted: 28 Apr 2005 08:30 AM PDT

Thanks Jan. That worked just great.

Jim

"Jan De Messemaeker" wrote:
 

Project 98 and Value Lists?

Posted: 28 Apr 2005 06:54 AM PDT

Hi Steve,

It's simple: P98 did not know field customizing at all.
So no formula, no graphical indicator, no value list, no specific treatment
of summary tasks.
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"Steve Scott" <microsoft.com> schreef in bericht
news:com... 
correct?? 
it 

need help

Posted: 27 Apr 2005 10:06 PM PDT

you'll need to be more specific

--
Cheers
JulieD
check out www.hcts.net.au/tipsandtricks.htm
....well i'm working on it anyway
"catchyogi" <com> wrote in message
news:com... 

Special Snapshot View

Posted: 27 Apr 2005 03:09 PM PDT

Hi Ryan
Have you tried using the Resource Usage view with the master project open.
Just insert a column for the project on the LHS. If the fies are open then
the filename will show, if not it will show the path.
As you have a resource pool then all resources are listed with all the
tasks, in all the projects, with the flexibility of roll-up to resource
summary level. You can drill down to find the cause of overallocation..
You don't need to do any VBA to get these views.

Regards...............Pratta



"Ryan P" wrote:
 

Can I print with gridlines accross the columns (Gantt View)

Posted: 27 Apr 2005 01:00 PM PDT

Or ... are you asking if you can have horizontal rows across your Gantt
chart?

If that's the case:

Right click in a blank part of your Gantt chart, choose Gridlines. On
the left you'll see
"Line to change" and Gantt Rows is an option. Choose a type of line,
and even choose what interval you want.
Check Print Preview.

Again, I may have answered a question that isn't exactly what you were
asking.
Subscribe to: Posts (Atom)