Pages

Search

Microsoft Word - UNLINKING sections NOT WORKING in Office 2010 (32-bit), Windows 8 64-bit

Microsoft Word - UNLINKING sections NOT WORKING in Office 2010 (32-bit), Windows 8 64-bit

UNLINKING sections NOT WORKING in Office 2010 (32-bit), Windows 8 64-bit

Posted: 08 Dec 2013 02:38 PM PST

I'm having a terrible time with the whole LINK TO PREVIOUS thing not working the way it's supposed to for sections.

I want a different header in every section of the document.
I use INSERT SECTION BREAK - NEXT PAGE to create the new section.
I click on the header of SECTION 2 and it brings up the "Header and Footer tools" Design tab
I CLICK ON "link to previous" on the header to UNLINK it.
My header no longer shows the "same as previous" tab below the dotted line - it should no longer be linked.
But when I then CHANGE the header of section 2, it CHANGES the header in SECTION 1!!!!  (AND VICE-VERSA)
(ARGH!)

Is there a known bug or problem with this?
I've tried EVERYTHING I can think of and it's totally NOT working.
This all worked fine in Office 2010, Windows XP... and I really need it to work now.
Is there some magic workaround I can use to get the damned headers to UNLINK properly?

Any and all help would be appreciated!

(Oh, and I've tried inserting additional pages between the end of section 1 and the start of section 2 - no luck.  I've verified my section break is "next page" via the "show formatting symbols")

Can Word provide a 2nd level of footnotes?

Posted: 08 Dec 2013 02:19 PM PST

I've been asked if there is wordprocessing software that will provide a second footnote level. You know, annotations in one sequence and textual notes in another. Both would run on the same page, so using both footnotes and endnotes wouldn't do. Word 2013 gives us only one footnote area, so multiple sequences of footnotes don't seem possible. But if one sequence of notes isn't too big and isn't dynamic, perhaps numbered items using the flexible footer area would work. 

(I know, the wheel has already been invented in the shape of biblical editing software, but I want to stick with Word.)

In TeX, which Word's equation zone follows, I found this advice:

"If you want to add a footnote in a "forbidden mode" like in math mode, tables, or boxes, you have to do it in two easy steps. At the place you want the little superscript number (in the equation, for example) put
\footnotemark

Then, right after the "forbidden mode" ends, put the text of the footnote in the command

\footnotetext{The text of the footnote goes here.}

Admittedly, if there are multiple footnotes in the same "mode," this can get a little messy, but it can be done. Check the appropriate references. Suffice to say it can be done."

_______


And there's advice for InDesign users (ID doesn't even do dynamic endnotes) to use cross-references between the text and the so-called  endnotes. Perhaps x-references could be combined with use of the footer area.


And then there are text boxes that might come to the rescue, if x-references can work in them.


Has anyone tried to make multiple levels of footnotes work?

Can't open windows files (word, excel)

Posted: 08 Dec 2013 02:13 PM PST

Hi, I downloaded Windows 2013 HUP (Home Use Program) a few weeks ago and though I was able to open word doc files at the time I can no longer open word docs or excel files that are under a different version of windows

Equation Editor Symbols Showing Blank Boxes?

Posted: 08 Dec 2013 01:56 PM PST

I've recently installed Office 2013 and found that when using the equation editor, some of the symbols appear as blank boxes instead of the usual symbol (such as \theta). I have tried uninstalling and reinstalling Office 2013 to no avail.

How do I solve this issue?

Where is the list of Authors stored?

Posted: 08 Dec 2013 01:32 PM PST

When I save a Word document or Excel spreadsheet (and probably other Office documents, as well), there is an Authors field. By default, it contains my name, but I can change that, or add additional authors. If I start to type a name in that field, a list drops down as I type, containing names I've previously entered there. When I first started using Office (I'm using 2010), this list consisted only of names from my Outlook Contacts (?), but as I entered other names there, it would "remember" them next time - up to a point. After a while, it stopped storing new names. And I mistyped some of the names that it did store. So I'd like to remove those mistyped names, to possibly make room for more names.


Does anyone know where that list is stored, if/how it can be edited, and/or if there's a setting somewhere to allow more names to be stored there?

microsoft works history

Posted: 08 Dec 2013 10:38 AM PST

I had untitled document dated 06/12/2013 (30 pages) which has disappeared from my microsoft works history,  programme, works word processor.
, 
also saved in works document (*.wps), have tried search and advance search without any luck, any advice please.

When MS Office Word Home Premium 365

Posted: 08 Dec 2013 10:14 AM PST

When MS Office  Word Home Premium 365 starts it abruptly stops after a minute or two due to an obvious problem and will close saying I will be notified when a solution is found.

Change printers

Posted: 08 Dec 2013 09:02 AM PST

I have Windows 8.1.  I want to use another printer on my network but I can't find any place to change printers, except going into the control panel and changing my default.  That is so time consuming since you have to go back and change the default again when you are through.  Windows 8 used to bring up a list of printers to choose from.  I can't even find this subject in the onscreen version of Microsoft Help.  Does anyone out there know the secret?

Double Click Word Template Does Not Create New document

Posted: 08 Dec 2013 08:43 AM PST

I am running Windows 8.1 and Word 2013.  I have the following issue and cannot find if anyone else who is having the same problem:

When I create new Word templates (dotx, or dotm) and then double click on them, Word opens the actual template instead of creating a new document based on the template.

This is causing my users to be editing the actual template without realizing it.  I cannot seem to find anywhere why this is happening.  I have had to resort to putting the template in a network share that is read only.

I am running a virtualization version of Word.

Thank you in advance for any light you can shed.

Have a very happy holidays one and all!

Restricting access to Word, PowerPoint and Excel

Posted: 08 Dec 2013 07:50 AM PST

I have been able to create a password to open Outlook.  I cannot figure out how to restrict access to the other programs short of password protecting every single file.  That would be unwieldy and near impossible.  Can someone show me how to protect or require a password to open the other three programs.


thank you,


John

disappointing "not responding" error

Posted: 08 Dec 2013 05:01 AM PST

Hi folks

I've just installed Office 2010 and recently after opening each document, for example in Word, within some minutes the program crashes and "not responding" error is thrown... . Even after re installation, I got the problem. I completely read below thread and did all the instructions, to the bone
That means the registry is fully recommenced and all of the add-ins are entirely disabled!!!
But the problem hasn't been resolved yet!
Would you please guiding me to get rid of this problem?!
Thank you

P.S. I already had a 2013 version of the office, which hasn't been removed completely. When I gotta uninstall it, "The language of your installation package is not supported by your system" error will appear... . I have no idea about possible relationship among them!

Download Microsoft Word Viewer

Posted: 08 Dec 2013 04:48 AM PST

I have tried to download the Word Viewer to view DOCX files at http://www.microsoft.com/en-gb/download/details.aspx?id=4

Whilst the download completes the Windows Installer is unable to open the package and displays message ' Patch package could not be opened'.

Operating sytem is Windows XP with all updates installed. I understood this download was suitable even if you do not have older version of Office installed. 

Microsoft word isn't opening

Posted: 08 Dec 2013 04:23 AM PST

I have Windows 7 professional and so long word was working properly but all of a sudden for the past 3 days it has stopped working. After I click on word it says the feature you are trying to use is unavailable and that the installer for configuration has failed and another toolbar is appearing saying it is a fatal error along with this - C:\MSOCache\All Users\{90140000-0011-0000-0000-0000000FF1CE}-C\. So what should I do o make it alright? I'm unable to access any of the documents no :( Can someone help me as soon as possible? 

Dates/numbers standardisation

Posted: 07 Dec 2013 11:07 PM PST

When writing dates I use day/month/year (e.g. 24th December 2013 or 3rd January 2014).

I have noticed that sometimes the th or rd appear superior and sometimes they don't.

How do I standardise this behaviour?

View side by side on word 2013

Posted: 07 Dec 2013 10:41 PM PST

Hi 
I am a new office 2013 user - I just graduated from XP. I have found the view side by side button, but can't seem to find out how I can determine which doc is on the right side of my screen and which is on the left. This is critical for me.
Is there any trick I am missing here?

One of my Microsoft programs is in Spanish and I don't know what program it is or how to fix it.

Posted: 07 Dec 2013 09:27 PM PST

I don't know what happened but a couple months ago I apparently downloaded a Microsoft word office problem and now whenever I just click on a program it automatically goes into an error message in Spanish and the right click this is in Spanish and I don't know what to do.  It has the logo next to the document name as a box with a "w" in it and a light blue circle with a circle with a line going through it in white.  It's the basic program and I have to right click and use "open with" to open with another program.  I have windows and on the bottom bar it's a titled orange box.  Help I don't know any spanish

How to type and print a document

Posted: 07 Dec 2013 09:04 PM PST

HOW TO GET A TYPING PAGE @ PRINT IT.

 

***Moved to *Office Topic: Microsoft Office Word* from *Microsoft Office Access* the database software

 

[ Original title: *** Email address is removed for privacy ***]

Word 2013 will not let me save updates to a document I'm working on

Posted: 07 Dec 2013 08:55 PM PST

I've been working on a document. It is saved to my Skydrive. I tried to save it. The save dialog appears, I click save, the dialog closes. Then the "ring" appears to show it's "thinking" and the dialog opens up again, as though I have not saved. I try renaming. Same cycle. Dialog reappears as though I have not saved it. I have also tried saving to a new location. Finally, I was going to copy and paste to a new document, but I get the error message: "There are too many edits in the document. This operation will be incomplete. Save your work."

I really need this document! Starting over is not an option. How can I save this thing?

Words running together in Word 2013

Posted: 07 Dec 2013 07:05 PM PST

Hello-
First time here, so let me know what info you need.  I purchased a new Dell with Windows 8 and Office 365 which contains Word 2013.  The problem I am having is that when I print various documents, random words are run together (i.e. "togothere" instead of "to go there")  The document on my computer looks fine with correct spacing, yet when it prints out, there random run-on words are created and I cannot figure out a) how to tell when/where this is going to happen or b) how to fix it.
Thank you for any suggestions,
Randy Davis

Page One of Section 3 Prints on Back Side of First Sheet with Duplex Printing

Posted: 07 Dec 2013 05:41 PM PST

Word 2010 and Windows 7 or XP SP3:

 

Section one contains two pages, Section 3 contains about 7 pages of a table of contents.  Section 3 contains about 200 pages.

 

Section Break 3 is (Odd).  Headers and Footers for Section 3 do NOT Link to Previous.

 

When I try to print with Mirrored Margins, e.g., Pages: p1s3-p4s3, the front side of the first sheet is blank, and the content that shows as page 1 on the editing screen is printed on the back side of the first sheet, and so forth, which is definitely not what I want.

 

When I look at the section 3 pages in preview, the wide margin appears on the even numbered pages, and the narrow margin on the odd pages.  I have margins configured Inside 1", Outside 0,.5".  The blank page that prints on the front of the first sheet does not appear in preview.

 

When I look at Section 2, the margins are correct, no blank page at first.

 

Please suggest a means to get page 1 of section 3 to print on the front side of the first sheet instead of the blank page appearing there.

 

I would appreciate your help,.

 

cw

Find the number of the last footnote added

Posted: 07 Dec 2013 05:11 PM PST

I'm transcribing documents from bookscanning, and want to preserve the footnote numbers that were in the original.  The document starts off as Unicode text from the OCR, and the footnote references and the footnote text are all in there in the plain text of the document.  Currently I manually mark the reference as `nnn and mark the footnote text as \nnn and then run a macro which creates a Word footnote and cuts and pastes the text into it.  But sometimes the scanner misses the reference number because it is very small, so I want to be able to say "put in the next number".

Is there a way to retrieve the footnote number of the previous footnote I added?

Receiving the message Something went wrong when try to open Office application.

Posted: 07 Dec 2013 04:38 PM PST

My microsoft office will not open, it keeps saying something went wrong and it cannot start. It tells me to try again, and if that doesn't work for me to repair it in programs in the control panel. I need help asap, I have assignments due and my MS office refuses to start up. What should I do?

Index headings failing to appear in TOC

Posted: 07 Dec 2013 03:26 PM PST

I have MS Word 2010.

My document has a Table of Contents (TOC) at the beginning of the document and an Index at the end of the document.

The Index has several categories such as Events, People, Places, etc.  I am unable to get the category headings to appear in the TOC.

The style auto-assigned to the category headings is "Index 1".  However, the TOC menu makes no reference to "Index 1" as a possible level to include in the TOC.  There is a heading called "Index Heading" but selecting that has no impact on the TOC.

Any suggestions would be much appreciated.   Thank you.

Bob.

how can i permanently remove the line between paragraphs

Posted: 07 Dec 2013 02:59 PM PST

I'm using Word 2013 in Office 365 Home and all I want to do is eliminate the line between paragraphs. I've tried selecting the option in 'line options' for all documents using normal.dot yet the setting doesn't hold. I tried opening the normal.dot and then saving it but it doesn't show any changes either. I have the same problem with my email as well. Any thoughts?

i bought hp pavilion 15. i dont know how to activate microsoft word and where is the product key,it is builtin windows 8 ,post ana mail me product key ,*** Email address is removed for privacy ***

Posted: 07 Dec 2013 01:34 AM PST

i bought hp pavilion 15. i dont know how to activate microsoft word and where is the product key,it is builtin windows 8 ,post  ana mail me product key ,*** Email address is removed for privacy ***

Microsoft Works - Read Only After Downloading to CD

Microsoft Works - Read Only After Downloading to CD

Read Only After Downloading to CD

Posted: 03 Dec 2006 09:36 AM PST

jim wrote: 
Do you want to modify the spreadsheet, or the CD. That is: Do you want to be able to add more files
to the CD?

If the latter is the case, your download software should have the option of "multi session" (Nero)
or other language to that effect.

--
Remove "-nubby-" to correspond.

changing or not showing the a,b,c,d... or the numbers on the left

Posted: 01 Dec 2006 05:53 PM PST


"Sandy" <microsoft.com> wrote in message
news:com... 

In Row 1 or Column A insert your own values. If you want them sequential,
use Edit : Fill Series.

Example: insert 1 in A1. Select several to the right then Edit : Fill Series
Select them all and Format Number : Leading Zeros : 3
Make them bold and centered.
Put the cursor in A2 and Format : Freeze Titles.

You can make any number of variations on this.

Differences between version 8.0 and 8.5

Posted: 28 Nov 2006 07:56 PM PST


"Tracy" <spam.me> wrote in message
news:phx.gbl...
 

"Welcome to Works 9.0 - previously known as Notepad".

Default font

Posted: 27 Nov 2006 11:16 AM PST

Gualtier Malde wrote: 


OK. I know when I'm beaten. Thank you all for buying into my Quest. Now, it's Miller Time.

Chuck


--
Remove "-nubby-" to correspond.

Works 8 Importing Calendar

Posted: 27 Nov 2006 08:14 AM PST

Hi Hans,

Unfortunately, they can't.

Items can be transferred one-at-a-time only.

HTH,
--
Kevin James.
Tua'r Goleuni


"Hans36" <net> wrote in message
news:%phx.gbl...
| Thanks for the information. I experimented using the "save as" option after
| selecting an appointment in Outlook. However, I do not know of any way
| multiple appointments; e.g. a months worth, can be saved and imported into
| the Works calendar using this procedure.
|
|
| "Ken" <Thanks> wrote in message
| news:phx.gbl...
| > Hi,
| >
| > The following from a previous post in this news group..
| >
| >
| > Hope it helps,
| > Ken
| >
| >
| > -------------------------------------------------------------------------
| >
| >
| > Works imports *.ics and *.vcs file formats.
| >
| >
| > Outlook _exports_ the following formats (from Outlook Help)
| >
| >
| > Microsoft Outlook Personal Folders file (.pst)
| > Microsoft Outlook 97-2002 Personal Folders file (.pst)
| > Comma Separated Values (MS-DOS) (.csv)
| > Comma Separated Values (Windows) (.csv)
| > iCalendar (.ics)
| > Tab Separated Values (MS-DOS) (.txt)
| > Tab Separated Values (Windows) (.txt)
| > Microsoft Access (.mdb)
| > Microsoft Excel (.xls)
| > vCalendar (.vcs)
| > vCard (Virtual Business Card) (.vcf)
| >
| >
| > *Note* Exporting to iCalendar, vCalendar, or vCard file format is
| > done by saving the information into the file format, not by using the
| > Import/Export Wizard.
| >
| >
| > iCalendar and vCalendar are Save As options that provide direct
| > import formats for a Works Calendar.
| >
| >
| > HTH
| > --
| > Kevin James.
| > Tua'r Goleuni
| > Microsoft MVP (Works) 1999-2005
| > Works KB Links: http://www.btinternet.com/~kevin.james1/WorksFAQ.htm
| >
| > "Hans36" <net> wrote in message
| > news:phx.gbl...
| > | If you select import/export in Outlook 2002 when in calendar mode then
| > | select export to a file the *.vcs file option is not one of the export
| > | options listed.
| > |
| > |
| > | "Michael Santovec" <net> wrote in message
| > | news:phx.gbl...
| > | > File formats that are supported in Works 7/8 & Suite 2003/04/05
| > | > http://support.microsoft.com/?kbid=884182
| > | >
| > | > You need to Export the calendar in Outlook to *.VCS format, then
| > import
| > | > that to Works.
| > | >
| > | > --
| > | >
| > | > Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm
| > | >
| > | >
| > | > "Hans36" <net> wrote in message
| > | > news:phx.gbl...
| > | >> Is it possible to import into the Works 8 calendar the Outlook 2002
| > | >> calendar information? If so what is the procedure?
| > | >>
| > | >>
| > | >
| > | >
| > |
| > |
| >
|
|

Can't open word password-protected docs

Posted: 26 Nov 2006 07:00 AM PST

I believe you have made the correct choice, Jim.

Good Luck.
--
Kevin James.
Tua'r Goleuni


"Jim" <co.uk> wrote in message
news:Qnebh.8797$news.blueyonder.co.uk...
| Hi Kevin
| Took me a few days to get round to it, but I've installed Word2002. The
| setup prog went into a new folder, not the folder for works8.5, which was
| what had worried me.
|
| The video problem occurred again, plus the hard disk makes strange noises,
| so
| I'm sending the PC back.
|
| Jim
|
|
| "Kevin James" <com> wrote in message
| news:%phx.gbl...
| > Hi Jim,
| >
| > 1). Works 8.5 is not enabled to open password protected files.
| >
| > You may choose to install Word as a standalone, separately and
| > without any other parts of Works Suite 2003. Can use the
| > Setup.exe
| > or data.msi files in the WORD folder.
| >
| > 2). This sounds like a hardware issue, could be a faulty cable going
| > to
| > the TFT screen or issues with the video card .
| >
| > However, perhaps update the video display drivers, downloadable
| > from the manufacturer's website.
| >
| > If the problem remains after trying the driver update
| > suggestion,
| > and as this is a new PC, I would take it back to be checked
| > over.
| >
| > HTH,
| > --
| > Kevin James.
| > Tua'r Goleuni
| >
| >
| > "Jim" <co.uk> wrote in message
| > news:2_hah.7123$news.blueyonder.co.uk...
| > | I've just set up a new PC and installed works 8.5. I seem to have two
| > | problems (already).
| > | 1) I can open nearly all the docs I created using Word 2002. However, I
| > | don't get the chance to open password-protected ones; I simply get a box
| > | stating that the file can't be opened, may be corrupted.
| > | I still have the Word CD, but to install it I'd have to install parts of
| > | Works 2003, and I'm not sure what the effects of that would be. Any
| > | suggestions? Note that I'm not asking how to find the password, I know
| > it,
| > | just want a chance to enter it!
| > |
| > | 2) It may be coincidence, but twice in two days while using Works My
| > monitor
| > | has gone wrong - I get a pale screen with jagged brown streaks. Only way
| > | I've found to cure it is to switch off the PC.
| > |
| > | Jim
| > |
| > |
| >
| >
| >
| >
|
|
|

vegetable garden

Posted: 26 Nov 2006 01:33 AM PST

Thanks Kevin
many good examples here.
SLLD

"Kevin James" <com> wrote in message
news:phx.gbl... 
http://www.parkseed.com/webapp/wcs/stores/servlet/StoreCatalogDisplay?storeI
d=10101&catalogId=10101&langId=-1&mainPage=gatepage&gate=GH_VegTipsLZ 



--
Posted via a free Usenet account from http://www.teranews.com

Works 8.x Database Form View

Posted: 22 Nov 2006 02:56 PM PST


"Kevin James" <com> wrote in message
news:Otiq%phx.gbl...
 

I've noticed that the lines seem to shift if you alter Page Setup, then
close and open the form.

Works 7 and .doc question

Posted: 21 Nov 2006 11:23 AM PST

You can download a converter.
http://www.microsoft.com/downloads/details.aspx?familyid=B9E11E83-F51B-4977-B572-8C042DF802C1&displaylang=en
--
Ronald Sommer

"Gordon" <com.invalid> wrote in message
news:%phx.gbl...
:I don't have Works - one of my clients (remote) does. Will Works 7 Word
: Processor save a document in Word (.doc) format?

History Selection Crashes Work

Posted: 17 Nov 2006 06:29 PM PST

Hi Hans,

Perhaps reinstall Works..

Before reinstalling, cleanse the installer and works files from your
system

Details of the cleanse process is given here in items 3 to 7 (&8).
(Ignore other details).

http://support.microsoft.com/kb/909529

HTH,
--
Kevin James.
Tua'r Goleuni


"Hans36" <net> wrote in message
news:phx.gbl...
| Unfortunately, I do not have a floppy drive. I haven't created any
| documents, spreadsheets, etc. using the program since I just installed it.
| Could this be the problem? Seems to me it shouldn't happen in any case.
| Since I have not used the program before I am not sure how I should go about
| correcting the problem.
|
|
| "Kevin James" <com> wrote in message
| news:phx.gbl...
| > Hi Hans,
| >
| > The program is looking for a file on the floppy drive.
| >
| > Place a (blank) floppy disc in the drive.
| >
| > If you can identify the file that is sought then delete
| > it from the list.
| >
| > HTH,
| > --
| > Kevin James.
| > Tua'r Goleuni
| >
| >
| > "Hans36" <net> wrote in message
| > news:%phx.gbl...
| > | Am running Works suite 2006 on my Windows XP home edition computer. Just
| > | installed it. On the home page when I select History. I get the message
| > | there is no disk in the drive and the system is locked up and I have to
| > use
| > | the "Vulcan nerve pinch" to exit the program because it says the program
| > is
| > | not responding.
| > |
| > |
| > |
| >
| >
|
|

Printing Envelopes from Filtered List

Posted: 16 Nov 2006 08:49 PM PST

Hi Stan, thanks for letting us know all is okay.

Ken

"Stan" <com> wrote in message
news:googlegroups.com...

| Ken,
| Thanks for your guidance. Everything is now OK. It just took me a
| little while to get entering the word processor to make an envelope
| template, vs. doing the filter and sort functions within the word
| processor vs. opening a template to print envelopes sorted out.
|
| Stan
|

| Ken wrote:
| > Hi Stan,
| >
| > Works Word processor, choose Tools, on it's menu select Mail Merge, on
the
| > expanding menu you will notice "Select Names" and "Filer and Sort" is
grayed
| > out.
| >
| > After Data Source is acquired these will become active. If the Data
Source
| > is from Address Book both will be active, if Data source is from
Database,
| > only Filter and Sort is active.
| >
| > Hope this helps,
| > Ken
| >
|

What is wkwbl.dll and how can I find it?

Posted: 16 Nov 2006 03:05 PM PST

HI Misty,

Perhaps this helps:

That WKWBL.DLL file may be corrupt.

You can manually replace it with files from the installation CD
( or WorksBkup folder - C:\Program Files\WorksBkup\Works Shared

Copy the file wkwbll.dll from one of the above locations and save
it to

c:\program files\microsoft works

and also copy to

c:\Program Files\Common Files\Microsoft Shared\Works Shared

The file may have been corrupted by installation the Office beta.

HTH,
--
Kevin James.
Tua'r Goleuni


"Misty" <microsoft.com> wrote in message
news:com...
| Everytime I go into microsoft works word and click on new.. an error box
| shows up saying unable to lovate component.
| "This application has failed to start because WkWbl.dll was not found.
| Reinstallin may fix this problem." I have tried 4 times to reinstall it and
| the same thing keeps happening. When I try to reinstall it.. it first says a
| fatal error has occured but then seem to install fine. Yet .. I still can
not
| open a new file, I am needing to do a resume fo a friend, make some labels
| ect and can't get into it at all. Can anyone help me this is so
| frustrating.Please Please please help.
| --
| Please understand not everyone knows even the simple things.

Printing labels in XP w.Work 4.5

Posted: 14 Nov 2006 12:20 PM PST


"Sandor Feher" <com> wrote in message
news:455b6887$0$11332$corenews.com...
 

Yes. Clearly it is not fully compatible with XP, however it does work fairly
well. Too bad we can't get Microsoft to recompile it.

Thunderbird not talking to Firefox - Forums Linux

Thunderbird not talking to Firefox - Forums Linux

Thunderbird not talking to Firefox

Posted: 15 Jun 2005 09:49 AM PDT

On Wed, 15 Jun 2005 11:36:06 -0700, Michael Perry wrote:
 


Thanks! Worked wonderfully...


Larry

Help: K address book locked-Mandriva

Posted: 15 Jun 2005 09:30 AM PDT

Thanks Thomas Overgaard,

That indeed solved the problem.
M. Badt


Thomas Overgaard wrote:
 

Debian dist-upgrade issue

Posted: 15 Jun 2005 04:47 AM PDT

Bill Marcum wrote: 

Nope, tried holding them, no change.
Unheld them,no change.

Thanks for trying though.

Rage

--
***********************************
* *
* EuropeSwPatentFree *
* *
***********************************

No C++ Compiler

Posted: 14 Jun 2005 04:39 PM PDT

com wrote: 
Is that your signature? >>>--->|

When installing RHEL 3, part way through, all you need to do is check the
box that says to install the compilation and development packages. It does
not take a superior human being like Peter; even I have done it, many times,
back since Red Hat Linux 5.0 days (1998?).

--
.~. Jean-David Beyer Registered Linux User 85642.
/V\ PGP-Key: 9A2FC99A Registered Machine 241939.
/( )\ Shrewsbury, New Jersey http://counter.li.org
^^-^^ 07:55:00 up 1 day, 1:44, 4 users, load average: 0.09, 0.10, 0.09

Installing or updating?

Posted: 14 Jun 2005 02:46 PM PDT

In the Usenet newsgroup comp.os.linux.setup, in article
<googlegroups.com>, macruzq wrote:
 

redhat-6.0 27 Apr 99 hedwig (glibc2.1 - 2.2.5-15)
fc3 08 Nov 04 2.6.9 (2.6.10 -> 2.6.11 updates) glibc-2.3.3-74
fc4 14 Jun 05 2.6.11-1.1369_FC4

Can you say "HIGHLY UNLIKELY"? The libraries are incompatible, and the
five year difference in the distributions means few if any of the old
stuff is even close.

Is the box potent enough? Is the partitions large enough? RH6.0 was
happy enough with a 386, 32 Megs of RAM and 500 to 1750 Megs of disk,
The release notes for Fedora 3 (and 4 on a 32 bit x86) say:

* Minimum: Pentium-class
Fedora Core 3 is optimized for Pentium 4 CPUs, but also supports
earlier CPUs (such as Pentium, Pentium Pro, Pentium II, Pentium III,
and including AMD and VIA variants). This approach has been taken
because Pentium-class optimizations actually result in reduced
performance for non-Pentium-class processors, and Pentium 4
scheduling is sufficiently different (while making up the bulk of
today's processors) to warrant this change.
* Recommended for text-mode: 200 MHz Pentium-class or better
* Recommended for graphical: 400 MHz Pentium II or better

Note

The disk space requirements listed below represent the disk space taken
up by Fedora Core 3 after the installation is complete. However,
additional disk space is required during the installation to support the
installation environment. This additional disk space corresponds to the
size of /Fedora/base/stage2.img (on CD-ROM 1) plus the size of the files
in /var/lib/rpm on the installed system.

In practical terms, this means that as little as an additional 90MB can
be required for a minimal installation, while as much as an additional
175MB can be required for an "everything" installation.

* Custom Installation (Minimal): 620MB
* Server: 1.1GB
* Personal Desktop: 2.3GB
* Workstation: 3.0GB
* Custom Installation (Everything): 6.9GB

Memory Requirements

This section lists the memory required to install Fedora Core 3.
* Minimum for text-mode: 64MB
* Minimum for graphical: 192MB
* Recommended for graphical: 256MB

If you have a x86-64, FC4 wants roughly double the RAM, and 600 Megs more
diskspace. Isn't software bloat wonderful?

Old guy

Booting from a floppy to an external drive

Posted: 13 Jun 2005 02:40 PM PDT

Thanks for the tips guys. I'll look into what you've suggested.

JohnB

Douglas Mayne wrote: 

Booting from USB HDD without BIOS support

Posted: 13 Jun 2005 10:36 AM PDT

Stephan Keil wrote: 

What you need is to boot from CD with an initial ramdisk including
the usb-storage support (mkinitrd --with=uhci-hcd --with=ohci-hcd
--with=ehci-hcd --with=usb-storage)
The initial ramdisk including the usb-storage is crucial to be able to
mount the root fs on the USB drive.

Then Google search for "grub on CD" to learn how to make a grub-bootable
cd-rom.

The typical grub.conf entry should be as follows:

title USB boot
root(cd)
kernel /vmlinuz-2.6.X-Y root=/dev/sdaZ
initrd /ramdisk-2.6.X.Y.img

I made all that in practice and it works.

Can't hear CDRom

Posted: 13 Jun 2005 06:23 AM PDT

Nemo Marii wrote: 

KsCD requires that you have that cable that goes from your
CDROM drive to your sound board. It doesn't interpret direct
data like other players do.

IP6 query

Posted: 13 Jun 2005 04:34 AM PDT

The Fedora box, i would not have a clue how to disable it on the router is a
westell router if thats important. The fedora box has a 3com 9XXB card can
remmeber all the numbers of my head, the other cards on the windows boxs are
a broadcom gigabit and USB ethernet adapter
"Nico Kadel-Garcia" <net> wrote in message
news:com... 
FC3 

Setting up VSFTP at Home - Please Help

Posted: 12 Jun 2005 07:53 AM PDT

No Problem, Thank you for your help
Moe
"Tauno Voipio" <fi.NOSPAM.invalid> wrote in message
news:ErYqe.193$inet.fi... 
works 
the 
correct? 
correct, 

Memory error using apt-get update

Posted: 11 Jun 2005 01:11 PM PDT

synonet.com <synonet.com>: 

/etc/apt/apt.conf:

APT::Cache-Limit 25165824;


--
Any technology distinguishable from magic is insufficiently advanced.
(*) http://www.spots.ab.ca/~keeling Linux Counter #80292
- - http://www.ietf.org/rfc/rfc1855.txt
Spammers! http://www.spots.ab.ca/~keeling/autospam.html

Fedora core 3, wierd ... it takes decisions in my place

Posted: 11 Jun 2005 06:43 AM PDT

CWO4 Dave Mann wrote:
 

I also use Fedora Core 3. The default Desktop environnemnt is GNome. How do
it to configure to force to run KDE als default desktop envoronnemnet. I
not understand how to explained above (2).

Thanks on all volunteers ;-)

--
David Van Mosselbeen - DVM
http://dvm.zapto.org:3333
---
Fedora Core 3 User

Setting the defaults for LILO

Posted: 10 Jun 2005 05:07 PM PDT

Bit Twister wrote: 

Well, I just found that this RH 6.1 distribution doesn't know about
FAT or FAT32 file systems, and that that appears to be in the
kernel. So I think I'll blow it away and try the Mandrake 8.0.
That package has about 6 CDs, and claims to be a power pack
edition. I picked it up at some sort of fire sale a while ago.
Once I figure out how to run things I will consider a modern
release.

In general I find Linux much poorer at navigation with the keyboard
than Windoze, which is surprising, because I don't consider Windoze
very good at that anyhow.

--
"If you want to post a followup via groups.google.com, don't use
the broken "Reply" link at the bottom of the article. Click on
"show options" at the top of the article, then click on the
"Reply" at the bottom of the article headers." - Keith Thompson

why /dev/shm is not used

Posted: 10 Jun 2005 01:28 AM PDT

I installed gkrellm2 which shows me my cpu usage - it jumps to 100%
each time I click a link in Firefox.....

here is my /etc/make.conf file :
# These settings were set by the catalyst build script that
automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-march=athlon-xp -O3 -fomit-frame-pointer -pipe"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
GENTOO_MIRRORS="ftp://mirrors.blueyonder.co.uk/mirrors/gentoo
http://gentoo.blueyonder.co.uk ftp://mirror.aiya.ru/pub/gentoo/
ftp://ftp.mirrorservice.org/sites/www.ibiblio.org/gentoo/"
SYNC="rsync://rsync.uk.gentoo.org/gentoo-portage"
VIDEO_CARDS="radeon"
USE="3dnow 3dnowext X11 aac accessibility acpi artswrappersuid
artworkextra
cdparanoia cpudetection divx4linux dpms dts dvb dvd dvdread
ethereal extraicons extramodules ffmpeg firefox freetts gimp
gkrellm gnomedb gnutls hal howl javascript jce jikes jpeg2k
logrotate lzo matroska mbrola md5sum mime mmx mmxext mp4live mpeg2
mpeg4 mplayer network nodroproot nvidia openssh parse-clocks pdf
perlsuid pic ppds rar rdesktop real rtc screenshot sse tga theora
threads tlen unicode usb voice win32codecs wxgtk1 xscreensaver
xvid
xvmc -apm -esd -gpm -ipv6 -motif"

gentoo distribution uses it each time I install a new app.
it uses those gcc flags to recompile every package.
are the flags ok?

here is my .config file :
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-gentoo-r9
# Sat Jun 11 16:33:11 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PC-card bridges
#

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VESA_STD is not set
CONFIG_FB_VESA_TNG=y
CONFIG_FB_VESA_DEFAULT_MODE="1024x768@60"
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB_SPLASH is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_SPEAKUP_DEFAULT="none"

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=y
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_RW_DETECT=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVFS_DEBUG=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

Installing TightVNC ?

Posted: 09 Jun 2005 02:05 PM PDT

Jim Stanley wrote: 
 

Jim, your attitude won't help you getting more answers or quickier help on
usenet, you rather will be killfiled and less people will read you.
You *first* learn how to use this powerful tool *then* start posting, and accept
tips when somebody more experienced tells you.
Newsgroups are *not* helpdesks, nobody deserver nothing, people uses part of its
time to help others. Dot.
How to post are topics covered countless times, and it is really boring to read
and read again such things, and i'm apologizing even for my post to the other
readers.

--
"Co' parlo no i scolta
Co' i scolta no i capise
Co' i capise i se desmentega"

RRB@ http://www.allservice.it/

Simple Question

Posted: 09 Jun 2005 04:30 AM PDT

RRB wrote:
 
<snip> 

Doh!
yeah, that'd work better...
--
Fedora Core release 2 (Tettnang), Linux 2.6.12-rc4-mm2
KDE: 3.4.1-1.0.fc2.kde, xorg-x11-6.8.2-1.FC2.13
11:00:00 up 1 day, 3:51, 1 user, load average: 0.34, 0.20, 0.17
MP3/OGG archive Total playlength : 7 days, 1 hours, 26 mins 30 seconds
"It's what you learn after you know it all that counts" John Wooden

testing new NIC with knoppix

Posted: 08 Jun 2005 08:25 AM PDT

com wrote: 




ah, I forgot about last time I did this, in windows 2000. I had to
enable ICS (Internet Connection Sharing) and buy a crosscable, IIRC.

setup is:

internet -> 802.11b router -> 802.11b network adapter -> eth1 ->
Computer -> eth0 -> PAP2

if that makes sense. the router is not accesible to me, it's my
landlord's.


-Thufir

Network Recognition Strangeness - Newbie Setup

Posted: 07 Jun 2005 04:51 PM PDT


"Giovanni" <net.it> wrote in message
news:net.it... 

No, that's how to run Samba out of inetd. This has several major flaws.

1: Most modern Linux and other OS distributions now use xinetd, which
keeps its services in individual config files in /etc/xinetd.d/.

2: You have to run xinetd or inetd to use this sort of feature.

3: It doesn't let you turn on or off Samba without having to futz with
the inetd or xinetd service.

4: No major OS distribution that I know of these days does Samba this
way anymore, they use init scripts instead.

There are some minor advantages to it, such as automatically restarting in
case Samba gets slapped down, but the overhead of running all these daemons
on a major Samba server is way too high to justify it.

no sound on fedora core 3

Posted: 07 Jun 2005 12:15 PM PDT

com wrote:
 

Usually kmix should save the settings on exit. Settings are stored
in ~/.kde/share/config/kmixctrlrc. Probably an access right
problem. In any case run alsamixer (assuming you're using ALSA)
from a terminal and set the card from here.Additionally make sure
KDE is configured for the sound system you are using (Control
Center->Sound & Multimedia->Sound System)
 

Arts takes control over the sound device to allow simultaneous
sound events. When arts locks the device no other application can
use it.

To use arts with non-kde apps they either need to have build-in
arts support or you need to
- turn off arts before runnung them
- set arts to a low auto-suspend time (also in Sound System)
- use artsdsp

I guess your mplayer was not build with arts support.

HTH
Ransom
--
For real email get public key 0xF6BB5695 from www.keyserver.net
NO to Software Patents - http://www.ffii.org

dual boot on 2 hard drives with lilo

Posted: 07 Jun 2005 10:31 AM PDT

Larry Gagnon wrote: 

Yes, "image=/boot/vmlinuz" is pointing at hda5 boot partition. I
assume that you installed Lilo to the MBR of hda from Vector Linux?
Then in Vector Linux, create a /mnt/,<somename> directory and in fstab
create an entry that will auto mount hdb2 to /mnt/<somename>.

Then change your lilo.conf section got VL5 to read
"image=/mnt/<somename>/boot/vmlinuz"
The rest is OK.

Good luck, jimbo

locked files

Posted: 07 Jun 2005 05:56 AM PDT

ilaboo wrote: 

Does kppp have permission to write in /var/lock/ 

I have been running UNIX since about 1971, and Linux since 1998, and do not
know what you mean by a file being locked. Files in /dev are mostly device
files, and files have read, write, and execute permissions (man ls). Most
files also have attributes (man lsattr and man chattr), but not, I believe,
those in /dev 
If there is a file such as LCK..ttyS4 (the lock file for my modem) in
/var/lock, you can remove it if you have permission. Normally, you should
not do this, but close the connection and then the software will
automatically release the lock for you.

--
.~. Jean-David Beyer Registered Linux User 85642.
/V\ PGP-Key: 9A2FC99A Registered Machine 241939.
/( )\ Shrewsbury, New Jersey http://counter.li.org
^^-^^ 10:05:00 up 9 days, 16:41, 3 users, load average: 4.10, 4.10, 4.17

RedHat 9, Modelines in XF86Config (Intel 865, GDM-4011P)

Posted: 06 Jun 2005 11:35 AM PDT

On Mon, 06 Jun 2005 11:35:16 -0700, andrew_bonello wrote:
 

Yes.

Don't waste our time (and your own) on a long obsolete distribution.
Install a recent one (Fedora 4) and come back if you still have a problem
(which is unlikely).


--
Vladimir
Subscribe to: Posts (Atom)