Pages

Search

Exchange 2007 SPF - sender ID - Microsoft Exchange

Exchange 2007 SPF - sender ID - Microsoft Exchange

Exchange 2007 SPF - sender ID

Posted: 18 Sep 2008 06:43 AM PDT

If Exchange is not the first host to process the email, you need to
configure the internal IP list at:

Organization Configuration | Hub Transport | Global Settings | Transport
Settings <properties> | Message Delivery

Here you put the IPs of any hosts handling emails before Exchange.



--
Alexander Zammit
WinDeveloper Software
IMF Tune - Enable the Exchange 2003 IMF/Exchange 2007 Content Filter to
unleash its full power.
http://www.windeveloper.com/imftune/


"Miha" <si> wrote in message
news:phx.gbl... 

Cannot uninstall ESM 2003

Posted: 17 Sep 2008 09:47 AM PDT

Have you tried running setup.exe from the Exchange 2003 CD?
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

"Paul Saleh" <microsoft.com> wrote in message
news:com... 

Outlook calendar appointments Issue

Posted: 17 Sep 2008 09:35 AM PDT

Hello Ian,

Thanks for your post and Lanwench's input.

Besides, please try to delete the ost file from c:\doents and
settings\user\local settings\application data\microsoft\outlook. When you
open Outlook next time, it will try to sync with Exchange Server and then
generate a new ost file there.

Note: It may take long time to sync with Exchange Server if you have a lot
of email.

Meanwhile, you may also create a new Outlook profile for user B and C to
test again.

How to create a new e-mail profile in Outlook 2007 and in Outlook 2003
http://support.microsoft.com/kb/829918/en-us

Hope this helps.


Best regards,
Robbin Meng(MSFT)

Mail Redelivered

Posted: 16 Sep 2008 12:35 PM PDT



"Lanwench [MVP - Exchange]" wrote:
 

I do not have a file level AV currently installed.

Cannot see Resource Schedule (sometimes)

Posted: 16 Sep 2008 07:30 AM PDT

On Tue, 16 Sep 2008 10:30:07 -0400, "Andrew" <com> wrote:
 

Logging on with the Outlook client generated it.
Or , you could have simply sent a test meeting to the room.

 

Exchange 2k7 SMTP relay

Posted: 16 Sep 2008 07:07 AM PDT

Are you saying you can't find the place or are you saying that you
have found the place but there aren't any connectors there?
If it's the latter you can just create the connector although I'd be
interested to know why there aren't two connectors there.

Did you have problems, failures or anything when you installed the
box?

Exchange 2007 Version

Posted: 16 Sep 2008 06:17 AM PDT

Thanks Wayne, I should have looked a little closer!

"Wayne Hollomby" wrote:
 

Changing Exchange 2007 message size doesn't work

Posted: 15 Sep 2008 12:57 PM PDT

Strange, it started working during the night :-) Maybe Exchange needs some
time to get it :-)
"Andy David {MVP}" <com> wrote in message
news:com... 

Memory usage

Posted: 15 Sep 2008 08:51 AM PDT

Have a look at this

http://mchangeteam.com/archive/2008/08/06/449484.aspx

Wayne

"Adam Pfeifer" <microsoft.com> wrote in message
news:com... 

Strange "The e-mail account does not exist at the organization thismessage was sent to..."

Posted: 15 Sep 2008 06:42 AM PDT

Or is someone's account configured with Jane Doe's as a delegate or
alternate recipient?
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

"Lanwench [MVP - Exchange]"
<donotsendme.unsolicitedmailatyahoo.com> wrote in message
news:phx.gbl... 

Best Place to register a domain (ISP Independent)

Posted: 14 Sep 2008 06:04 AM PDT

create_share <microsoft.com> wrote: 

You're most welcome.
 

Mailbox Search

Posted: 12 Sep 2008 01:30 PM PDT

I'm looking for a solution for Exchange Server 2003. The feature would be
used to emails based on subject headers and specific keywords if possible.

"Bharat Suneja [MSFT]" wrote:
 

Exchange RAID Setup

Posted: 12 Sep 2008 11:56 AM PDT

But it might be good enough. It's hard to say without knowing how many
users the server will host and what kind of hardware will be used.
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

"John Fullbright" <fjohn@donotspamnetappdotcom> wrote in message
news:%phx.gbl... 

Export Mailbox to PST

Posted: 12 Sep 2008 07:23 AM PDT

Like I said, don't do that.
If you have Exchange 2007, use the Export-Mailbox command.

"Jasper Recto" <com> wrote in message
news:%phx.gbl... 

adding redundancy to Exchange

Posted: 11 Sep 2008 05:17 PM PDT

Thanks, Ed. You summed it up really well. I'm going with the cold backup that
I'll fire up when needed and will have a backup that won't be more that 4
hours old (incremental shadow copies done 4X a day).

"Ed Crowley [MVP]" wrote:
 

Exchange service accounts run under the "Local System" account by default?

Posted: 11 Sep 2008 03:20 PM PDT

Thank you for the advice.

OWA Access (Exchange 2007)

Posted: 11 Sep 2008 01:40 PM PDT

John F. makes a good point, are using host headers?

--
John Oliver, Jr
MCSE, MCT, CCNA
Exchange MVP 2008
Microsoft Certified Partner

"Ashpoint" <microsoft.com> wrote in message
news:com... 

Maintaining a disaster standby

Posted: 11 Sep 2008 01:08 PM PDT

Glad to help.

--
John Oliver, Jr
MCSE, MCT, CCNA
Exchange MVP 2008
Microsoft Certified Partner

"mrecomm101" <microsoft.com> wrote in message
news:com... 

When you install Exchange 2003, how come it installs Microsoft Search?

Posted: 11 Sep 2008 11:26 AM PDT

Ha! Don't believe the hype.

"Spin" <com> wrote in message
news:individual.net... 

Incoming messages problem

Posted: 11 Sep 2008 09:16 AM PDT

Thanks for the reply ED. It turns out that the spam filtering software was
configured to Spool automatically if the mail server blinked. Problem with
this was that it wasn't configured to Unspool when the mail server came back
up. So last weekend everyone stopped getting mail and they didn't notice
until Wednesday - pretty funny if you think about it. : ) Thanks again.

"Ed Crowley [MVP]" wrote:
 

Problem accessing an Exchange Server instance

Posted: 11 Sep 2008 07:08 AM PDT

You could clone a domain controller and build an off-network of your
production AD and install Exchange using the /DisasterRecovery switch, then
restore the database. You can copy the messages in question using Outlook
to a PST and transport that to the production network.
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

<de> wrote in message
news:googlegroups.com... 

Unable to relay when using Exchange 2007 as SMTP server

Posted: 11 Sep 2008 03:36 AM PDT

Miha,
Go to the Exchange Management Console> Go to Server Configuation> Select Hub
Transprort. Create a New Recieve Connector. Create a new connector, Make
sure the remote IP range you add contains the IP of the server that host your
internal application. Go to the properties of the connector you created and
go to the Authenication tab. Select Externally Secured. This should do the
trick. :-)

Cheers,
Juan B. Giusti [MCTS]

"Mark Arnold [MVP]" wrote:
 

Disable pop and imap accounts for all users

Posted: 11 Sep 2008 03:10 AM PDT

oh, 2 bits.

much more elegant.


"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Edge Transport Queing mail

Posted: 10 Sep 2008 05:20 PM PDT

Yeah, I've looked at that, as you can see from my original post, the
Test-EdgeSynchronization works OK.

The only thing I can figure, is that when it first went down, my guy through
it was a certificate problem, so he generated a new certificate. Which I
think is what caused this descrepancy.

I'm back up and running by restoring the edge Transport server from the
previous day, but I've got 150 e-mails in the queue of the "broken" transport
server that look to be something other than spam (weird, I know).

So I need to try to bring it online today, to at least get those mail
messages off of it. My plan is to empty all the queues, shutdown the restored
copy, bring up the broken one, and try to re-subscribe using these steps:
http://technet.microsoft.com/en-us/library/bb125236(EXCHG.80).aspx

I've searched through much of KBs and Technet... my biggest fear at this
point is that everything is working, and by trying to get these messages I
may break what I ahve working...

"Wayne Hollomby" wrote:
 

Microsoft Word - Image displays as a box after pasting it from a web page

Microsoft Word - Image displays as a box after pasting it from a web page

Image displays as a box after pasting it from a web page

Posted: 21 Feb 2015 02:34 PM PST

Split from this thread.

I copied a web page text and image into MS Word 2013.

Text is displayed but the image is just a box.

MS Word 2013 options are set as:

"Picture placeholders" is NOT checked,

 "Show drawings and text boxes on screen" is checked

What else could be causing the issue?

HTM/HTML Size Change after Word Document Save As using Different Computers

Posted: 21 Feb 2015 12:24 PM PST

I maintain a web site and use MS Word to create the HTM/HTML files. I've always used a desktop to first create the word documents and the web pages appeared correctly. After beginning to use my Lenovo Yoga 2 Pro (3200 x 1800 Display), the images on the web pages from saving the exact same Word document as a web page using the Yoga are much larger than those saved on my Dell desktop. Does anyone know any settings that can be changed to avoid this problem?

how do i use MOVE when using TRACK CHANGES in WORD

Posted: 21 Feb 2015 11:25 AM PST

When i move one sentence from page 1 to page 2 under TRACK CHANGES, instead of showing "moved", it showed "deleted" and "inserted". How do I let it show "moved"??

Merge field in Excel is displayed as 12:00:00 A.M.

Posted: 21 Feb 2015 10:54 AM PST

My data source in Excel has 3 different cells, all of which contain mixed data (i.e. if, date, concatenate functions in combination with text).  The setting for all 3 fields are exactly the same, and the cells display the information correctly within Excel.  However, when I merge the info to Word, the info contained in the first cell merges over correctly, but the 2nd and 3rd cells display "12:00:00 A.M" even though they are not blank cells.  How can I fix this?  Again, all 3 cells have mixed data (if, date, concatenate functions in combination with text).  TIA.

Mail Merge need to Round Up not to nearest

Posted: 21 Feb 2015 09:40 AM PST

Is it possible to make any number that is not whole round UP to the next value. Using the switch\#0 only rounds it to the nearest number.

For example {196/12\#0} is giving me 16 and I need it to show 17

Full Page Graphic and Uncooperative Text Wrapping

Posted: 21 Feb 2015 09:40 AM PST

Hi All,

I'm putting together a document that has full page graphic sections. I'm trying to set it up so it'll be like this:

Page 1
This page has text for the whole page, and when it gets to the end it breaks-

Page 2
[All one big graphic e.g. just a big rectangle, and there is no text on the page at all]

Page 3
-and then the last sentence from page 1 continues here, and text continues normally.

PROBLEM IS, Word 2007 appears to demand that every page has a least one line of text. For example, if I set up a small text box on a page with text wrapping, the text starts above it the box, breaks, and continues after; if you make the box bigger, more and more text will leave the page, until there is only one line of text on the page, and it will -never- go away, even if it means overlapping your unoverlappable graphic.

Any help solving this issue would be greatly appreciated. Many Thanks.

How to make Drop Cap Point Size Consistent

Posted: 21 Feb 2015 08:42 AM PST

In implementing drop cap in Word 2010, I've found that a "W" is at a point size of 41.5 while a "B" (and all other letters) is at a point size of 33.5.   I specified the drop caps to be 2 lines.  The body font size is 11-points.  The font I'm using is Plantagenet Cherokee.  I have line spacing at Multiple 1.05 lines.

Because the "W" is at a greater point size, it is ignoring the 2 lines specified and is actually 3 lines.

How do I fix?

Thanks

Rick

Windows 8.1 crash?

Posted: 21 Feb 2015 07:17 AM PST

Hi, 

i'm not sure if this is a windows problem or a microsoft word problem. sometimes any microsoft programs i'm running (e.g word, powerpoint) exit and the task bar at the bottom of my screen goes and i'm left with a blank screen with the colour i chose as my theme colour. if i open my task manager and view programs  running, chrome, spotify e.t.c are still running. any ideas why this is happening and how to fix it?

Thanks in advance,

Rhys

P.S i scanned my computer it's not a virus

Edit: i scanned my computer it's not a virus re scan has shown i had malware, i think this might fix it but please keep suggesting any fixes just in case :)

Word 2010 printing the address twice side by side on the envelope

Posted: 21 Feb 2015 06:26 AM PST

Problem is new.  After I type a letter and select the envelope option the envelope has the address twice side by side on the envelope.

Save As Error Message 'There are no more files'

Posted: 21 Feb 2015 05:48 AM PST


I am trying to save a Word 2010 document but keep getting a Save As Error Message 'There are no more files'.

I have troubleshooted online and the only thing I came accross to do was to go into Word save options and make sure and set 'Save files in this format: Word Document (*,docx). However, I am still getting the same Save As error message.

I have tried other Microsoft applications and the same message appears when saving excel and other applications

Thank you for any help

How to copy from WORD (2013) without the formatting

Posted: 21 Feb 2015 05:43 AM PST

Hi,

I need to copy FROM Word (2013) to another application  (Reference Manager).  This application has NO "Paste text only" option and "Ctrl/Shift V" does not work.  The trouble is that when I do a simple "Paste" or "Ctrl/V", the clipboard delivers not only the text but additional characters related to the formating.  

Here is an example:  The WORD document contains the string "123".  If I make a copy and paste it into my application, here is what I get:

"PrFont34Bin0BinSub0Frac0Def1Margin0Margin0Jc1Indent1440Lim0Lim1123".

This happens only if copying from WORD, but not from PowerPoint or Excel.

How do I make "Copy" to only copy the text, not the formatting ?

Windows 7 Microsoft Office Starter 2010 Click to Run

Posted: 21 Feb 2015 05:36 AM PST

Can anyone help me with my problem?

I purchased my computer from Dell with Windows pre-installed. I then started experiencing problems with Word and Excel and can't access them because of Click to Run configuration failure. I have looked on several forums and visited Microsoft Support and have tried to uninstall Click-to-Run/Office through the Control Panel. This doesn't work and keeps coming up with error messages saying to try again. I have also tried to uninstall by going through Accessories to Installer. Again it doesn't work. I also tried doing a repair on Click-to-Run which seems to work but it didnt have any effect on the problem at hand.

I have tried all of the FixIt options I have come across and tried to reinstall using the Product Key which doesn't work (I have checked and re-checked it a dozen times).

I have the original Operating System disk that came with the computer and I did do a full back up and then re-installed but this hasn't helped.

My last attempt was to try to again uninstall Click-to-Run and then try to switch to an MSI Based Office edition. Nothing seems to work.

Basically I can't access Word of Excel at all.

There is a disk drive called Microsoft Office Click-to-Run 2010 (Protected) (Q:) which seems to be empty/won't let me do anything with it but from what I've read on the forums I should just ignore this.

I am a complete techno-phobe and have tried to follow the various step by step instructions posted on the forums but none of the instructions tell me what I should do when the "fixes" don't work. I really do need an "idiot's guide". Is anyone able to help please?

Thanks

Tina

Microsoft Word 2007 crashes

Posted: 21 Feb 2015 01:48 AM PST

Hi

Iam using microsoft office 2007 on windows 8.1. Every thing was going on perfectly but yesterday my WORD started crashing. When ever i try to open it it says "there was a problem while sending command o the program". I have used fix it many times and what happens that RESOLVING PROBLEM keep on going on and on and on and never ends. 

note: Other apps of office 2007 are working perfectly except word 2007

Kindly please solute this issue as soon as possibe

[Moderator note: Changed title from "Microsoft word 2007"]

Insert/Imbed Youtube video (or any video) into Word 2010 Starter

Posted: 20 Feb 2015 10:55 PM PST

I am trying to insert a Youtube video into Word 2010 Starter. I don't have Powerpoint. Is there a simple way to do this?

How do make word 2013 print go directly to the print properties dialog box

Posted: 20 Feb 2015 10:40 PM PST

In Word 2007, when I would hit the PRINTER icon in the toolbar, it would take me directly to the printer's Print Properties. Now in Word 2013 (365), when I click on the PRINTER icon (or go through FILE/PRINT), it brings up a whole new page, and then I also have to click on the Print Properties, which now makes an extra step. Is there a way to bring the printer dialog box up directly into the printer's print properties dialog box? 

How do I find out what version update of Word 2013 and Outlook 2013 (Office 365)

Posted: 20 Feb 2015 09:46 PM PST

How do I find out what version update of Word 2013 and Outlook 2013 (Office 365) since there is no longer a help menu and no longer the "Resource Option" in "Options" section of these 2 programs?

printer HP Deskjet 1320

Posted: 20 Feb 2015 02:21 PM PST

printing only blank pages from a Word Doc, but did print a test page when instructed to do so by HP Solutions.  Printed from 2 other sources today, but only blank pages when trying a created Word Doc.

1 hour later:  HP 1320 will print Excel docs, but none of my Word Docs; tried some, other than the one that I had previously tried to print.
Subscribe to: Posts (Atom)