Pages

Search

Microsoft Word - Microsoft Office Read Only!!!

Microsoft Word - Microsoft Office Read Only!!!


Microsoft Office Read Only!!!

Posted: 25 Dec 2013 02:25 PM PST

Hi,

Every time I open my Microsoft Word on my laptop, it opens as 'read only', and then I have to go to file > Open for Editing. 

Is there a way to change the settings so it's not read-only when I first open the program?


Thanks a bunch!

Dropped Drop Cap issue.

Posted: 25 Dec 2013 01:56 PM PST

Greetings,

The reason for this message is I am making final edits to my book. I was successful with my initial attempt to insert a dropped cap. However, where I indicate the section of the story i.e., "Chapter 1" and insert the dropped cap the letter, it rests on top of the sentence. If I erase "Chapter" and its header, and I bring the paragraph to the top of the page I am able to successfully insert the dropped cap. My question is how is it possible to insert the dropped cap with the word art, and the chapter notification intact?

This pictures reference what I am discussing:

I have surface pro and windows 8. All of a sudden my office 365 programs tell me I have unlicensed product and tells me to activate.

Posted: 25 Dec 2013 01:25 PM PST

I have surface pro and windows 8. All of a sudden my office 365 programs tell me I have unlicensed product and tells me to activate. It will not activate.  Get an error we could not connect to the server, Please try again in a few minutes.  error (0x80072EE7)  it has done this all day and also has the phone activation greyed out.  I've uninstalled and deactivated but the problem still exists. I don't have this problem on my other devices.

Office 2007:Third level heading and paragraph on same line

Posted: 25 Dec 2013 12:08 PM PST

Hi!!
I am writing a report for school. As a requirement for the report, I need third level heading and the paragraph following it on a same line??How can I do it?

Find & Replace

Posted: 25 Dec 2013 11:40 AM PST

Hello,

 

On every page on 6th line i have this 1/-/2012 i want to remove this slash part (/)  with wildcard search howto do that it will remove the slash from every page and that to of 6th line.

This 1 and 2012 will change on every page, 1 can be 10 or 20 & 2012 can be 2098 or 200 that slash part is constant.

 

 

 

Word only corrects spelling with one language at the time

Posted: 25 Dec 2013 10:56 AM PST

Hello, when I installed office for the first time English was the default langauge then I installed the swedish too, however I noticed that it would only correct my swedish so I uninstalled it and set english to be default again, but it still only corrects my swedish, not my english.

Whats the deal?

Speech Recognition in Word 2013

Posted: 25 Dec 2013 08:54 AM PST

I have started to use Speech Recognition using Word 2013. It accepts dictation fine. However, when I try to insert the text that I have dictated, it only pasts about 120 characters from the dictation window to the document. The rest of the text disappears. Do you have to say insert after every sentence?


Word 2013

Posted: 25 Dec 2013 02:59 AM PST

I have a new laptop. I was given 1 month trial of Office 2013. I only use word so when my trial expires I want to purchase word 2013. Can anyone explain what is meant by 'non-commercial' ?Why is it less expensive than the others ?

Word - Footnote to End Note Conversion - Special Need

Posted: 24 Dec 2013 04:54 PM PST

Hello,


I finished writing my first book on Word!  I am so happy....

The book has 6 chapters containing 90 footnotes.


I want to convert the footnotes to endnotes but....

The desire is to place the end notes at the end of each of the six chapters....


So, I placed a page break and a section break at the end of each chapter.

Then, I tried in various ways to convert from footnotes to end notes.

Each attempt brought all 90 notes to the end of chapter 6.


I could not place the footnote at the end of it's respective chapter as an endnote.


How do you set up Word to convert footnotes to end notes in a document, placing footnotes as endnotes to the end of each chapter?


Thanks and Merry Christmas,


Mike





unwanted document

Posted: 24 Dec 2013 04:46 PM PST

When ever I print a existing word document, It prints a second document of some narration of the first one. With info such as file name,author,creation date
total editing time,pages,number of characters, and a few more. Any information would be appreciated.
                                                                                                                                                           Thank You

If-Then error

Posted: 24 Dec 2013 04:05 PM PST

I am trying to do an if-then formula in Word 2007. I am pretty new to using forulas in Word I usually just use Excel, but can't in this case. Here is the formulas that I basically created in my head.

 

=IF(C3=Y,Product(D3:E3)+B3,Product(D3:E3))

 

I get a bookmark error message.

Word will not open 2003 doc documents

Posted: 24 Dec 2013 01:43 PM PST

Ever since I have installed office 2010 I have had problems opening word 2003 documents which were in fact created in word. I have seen a dialog box in saving docs about choosing to maintain compatibility of docx. with doc. This is astonishing, but could it be a cause of the problem. Meanwhile, when I try to open the same doc documents in word perfect--no problem at all, except that the outline format is off. Is there some choice in options or elsewhere which will overcome the issue?


Not all prior word 2003 docs but many, and I cannot figure why.

Office XP error after Office 2003 update - Microsoft Office forums

Office XP error after Office 2003 update - Microsoft Office forums


Office XP error after Office 2003 update

Posted: 02 Feb 2006 02:53 PM PST

Thanks for the advice. I'd already tried this. MSO XP repair flips the
strings around and Excel 2002 help works. MSO 2003 repair flips them back so
everything fails again.

The files aren't overwritten. MSO XP files are in the office10 subfolder
and MSO 2003 files are in the office11 subfolder. My theory has Office
components identified by a component guid and a version guid. This method
isn't used with these registry values. There is just a component guid and
any version information is in each of the REG_MULTI_SZ strings and something
in MSO XP is assuming the first string is the one it wants, I think. MSO
2003 may be doing it right.

"ANONYMOUS" wrote:
 

New installation of Office 2003 Pro - how to keep customization

Posted: 31 Jan 2006 04:52 PM PST

Sorry - I am of the "teach a man to fish" school of assistance. Use Windows
Help files.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
reading.


After furious head scratching, sharonbw asked:

| OK. But if I knew where to find such a thing I would have used it. Is
| it on my Office CD? In each separate program on the old computer (now
| an extra harddrive in my new system)? Something I download online?
| Something I need to order from Microsoft? A Windows XP utility? (Yes,
| I know I can look for it, but can't you just tell me?)
|
| Thanks
|
|
| "Milly Staples [MVP - Outlook]" wrote:
|
|| Use the File and Settings Transfer Wizard to copy your settings.
||
|| --
|| Milly Staples [MVP - Outlook]
||
|| Post all replies to the group to keep the discussion intact. All
|| unsolicited mail sent to my personal account will be deleted without
|| reading.
||
||
|| After furious head scratching, sharonbw asked:
||
||| I re-installed Office 2003 pro on a new computer (from original CD).
||| Is there any easy way to keep all my old customization (toolbars,
||| etc.)?
|||
||| I did copy the Outlook data and other files in the "Application
||| Data/Office" folder thinking that would do it. My email and SOME of
||| the customization for Word, Excel, etc. is there - but not all. Is
||| there somewhere else user changes get saved? Is there some
||| customization that can't be transferred?


I NEED POP3 & SMTP FOR HOTMAIL SO I CAN CONFIGURATE OUTLOOK

Posted: 31 Jan 2006 10:45 AM PST

Thanks, Milly.

Milly Staples [MVP - Outlook] wrote:
 

File Level Password

Posted: 31 Jan 2006 09:45 AM PST

Perfect.. Thanks...
Jay

"Anne Troy" wrote:
 

Office 2000 Uninstall - What is the admin path?

Posted: 30 Jan 2006 02:40 PM PST

The installation source for this product is not available. Verify that the
source exists and that you can access it. However this seems to be an "add or
remove programs" error message rather than one from the installer itself.

Just to summerise

I click remove
Setup asks for disc
I enter the disc
Then comes up with "The feature you are trying to use is on a network
resource that is unavailable" error message and gives option to browse for it
I click ok
"The installation source for this product is not available. Verify that the
source exists and that you can access it." is displayed
End.

"tomraffe" wrote:
 

Enforcing Grayscale print

Posted: 30 Jan 2006 03:45 AM PST

Hi Hallstein,

You may want to also post this in the Powerpoint newsgroup (link below) and include the version(s) of Powerpoint and the Printer
model you are using when posting there.

=========
<<"hallstein" <yahoo.com> wrote in message news:%phx.gbl...
A dozen of my users prints powerpoint presentations each day. The
presentations are in color, but our printers are black and white.
However the setting Grayscale does not produce the same output as the
default (e.g. blue backgrounds are removed and it is less hungry on the
print toner).

I would like to enforce grayscale printing for Powerpoint, however I
cannot find any setting at "Custom Installation Wizard" or registry
change. Also, no option seem to be available inside Powerpoint, as this
setting is saved per printer?

I see that something is saved in a .PIP file ( C:\Documents and
Settings\hallstein\Application Data\Microsoft\Office\PowerP10.pip) when
I alter this per printer, but this is a binary file that I am not
allowed to tweak I guess-

So, anybody out there with the knowledge I obviously lack? :) >>
--
LLet us know if this has helped you,

Bob Buckland ?:-)
MS Office System Products MVP
*courtesy is not expensive and can pay big dividends8

A. Specific newsgroup/discussion group mentioned in this message:
news://msnews.microsoft.com/microsoft.public.powerpoint
or via browser:
http://microsoft.com/communities/newsgroups/en-us/?dg=microsoft.public.powerpoint


B. MS Office Community discussion/newsgroups via Web Browser
http://microsoft.com/office/community/en-us/default.mspx
or
Microsoft hosted newsgroups via Outlook Express/newsreader
news://msnews.microsoft.com



office 2003 standard to pro

Posted: 29 Jan 2006 02:53 PM PST

Both are retail copies so everything should be okay. Installed the
office 2003 pro and was relieved to see all my data still there without
having to use the backup copies that I had made.

Thanks to all for a great resource for users.
peter


"Bob Buckland ?:-\)" <75214.226(At Beautiful Downtown)compuserve.com>
typed in news:#phx.gbl:
 

Office 2003 Startup

Posted: 29 Jan 2006 01:42 PM PST

Unfortunately no.

"mds" <microsoft.com> wrote in message
news:com... 


Office home user program and new computer

Posted: 28 Jan 2006 01:53 AM PST

Hi Zook,

You may want to check with your company administrator on this one on how they are tracking their license count for Home Use
licensing under their MS Volume Software License Agreement.

======== 
Hi
I put together a new computer and want to install office pro 2003 (cd from
home user program). This has been activated on my old system (which is now in
pieces). As it will only be installed on one machine can I not activate it
again on the new PC? <<
--
Let us know if this helped you,

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

For Everyday MS Office tips to "use right away" -
http://microsoft.com/events/series/administrativetipsandtricks.mspx



EULA question on upgrades

Posted: 27 Jan 2006 01:58 PM PST

Hi Doug,

Office 2003 'upgrade' editions are retail packages and have retail licenses. You should be able to use an OEM Office CD from a
previous Office edition as the qualifying product to install the Office 2003 retail product on another PC, but you won't be able to
move the OEM Office XP copy to another machine.

========
<<"Doug Lowe" <com> wrote in message news:43da976b$0$3753$twtelecom.net...
I have a question about purchasing the Office 2003 Professional Upgrade from
a retail store and applying it to an Office XP Professional acquired via an
OEM license.

Does the Office 2003 Professional Upgrade edition also upgrade my original
OEM license to a retail EULA? In other words, if I upgrade to 2003, do I
then get the right to remove the Office XP from the machine it was purchased
with, then install the 2003 edition on another machine? >>
--
Let us know if this helped you,

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

For Everyday MS Office tips to "use right away" -
http://microsoft.com/events/series/administrativetipsandtricks.mspx





GFS and Fedora 4 Cluser Setup (Begginer) - Forums Linux

GFS and Fedora 4 Cluser Setup (Begginer) - Forums Linux


GFS and Fedora 4 Cluser Setup (Begginer)

Posted: 08 Aug 2005 10:56 AM PDT

In comp.os.linux.setup com: 
 
 
 

[ more gfs questions ]
 
 
 

Now let me answer, try the docu first:

http://www.redhat.com/docs/manuals/csgfs/

"Red Hat GFS 6.1 Administrator's Guide" should answer your
question and hopefully enable you to get things working.

Good luck

BTW
Doesn't seemed to have worked with quoting, but thy for trying
anyway.

--
Michael Heiming (X-PGP-Sig > GPG-Key ID: EDD27B94)
mail: echo qr | perl -pe 'y/a-z/n-za-m/'
#bofh excuse 257: That would be because the software doesn't
work.

Matrox G400 Dualhead...

Posted: 07 Aug 2005 07:17 AM PDT

Hello Kai-Martin,

As they say in Germany: "Herzlichen Dank fuer's Antwort!".
Thank you for your answer. Please, find below my xorg.conf file.
I hope you can help me out on this one.

============ BEGIN XORG.CONF ============
# /.../
# SaX generated X11 config file
# Created on: 2005-08-08T21:06:35+0200.
#
# Version: 4.8
# Contact: Marcus Schaefer <de>, 2002
#
# Automatically generated by [ISaX] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection

Section "Module"
Load "glx"
Load "type1"
Load "extmod"
Load "dbe"
Load "freetype"
Load "v4l"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "7"
Option "Device" "/dev/input/mice"
Option "Name" "ImExPS/2 Generic Explorer Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 386 290
HorizSync 30-82
Identifier "Monitor[0]"
ModelName "1280X1024@60HZ"
Option "DPMS"
VendorName "--> LCD"
VertRefresh 40-60
UseModes "Modes[0]"
EndSection

Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 386 290
HorizSync 30-82
Identifier "Monitor[1]"
ModelName "1280X1024@60HZ"
Option "DPMS"
VendorName "--> LCD"
VertRefresh 40-60
UseModes "Modes[1]"
EndSection

Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
EndSection

Section "Modes"
Identifier "Modes[1]"
Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
+HSync +VSync
EndSection

Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[1]"
Identifier "Screen[1]"
Monitor "Monitor[1]"
EndSection

Section "Device"
BoardName "Matrox G400 DH"
Driver "mga"
Identifier "Device[0]"
Screen 0
Option "Rotate" "off"
VendorName "Matrox"
EndSection

Section "Device"
BoardName "Matrox G400 DH"
Driver "mga"
Identifier "Device[1]"
Option "hwcursor" "off"
Screen 1
VendorName "Matrox"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "on"
Screen "Screen[0]"
Screen "Screen[1]" RightOf "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Section "Extensions"
EndSection
============ ENDE XORG.CONF ============

Kind regards/Schoene Gruessen

Rmail user groups. Rmail. emacs. spamassassin headers. emacs commands. Rmail commands. whitelist.

Posted: 06 Aug 2005 04:09 PM PDT


<csail.mit.edu> wrote in message
news:googlegroups.com... 

Ahh. I'm afraid I'd have to dig into the dotfiles of a former employer to
give you the exact answer. Since I no longer work there, it might be, ummmm.
Inappropriate to dig directly for those. Are you sure you can't work from
the web references?

If reading and mastering such net-based documentation is beyond your current
expertise, I've got to ask, why are you using Emacs for mail rather than a
more comfortable email environment, such as Thunderbird or Evolution?


Can't get scroll mouse to work.

Posted: 06 Aug 2005 05:38 AM PDT


jsuthan (com) writes: 
And we went through this on July 24th, when you replied to a slew of
messages that were years old. You have no problem reading 4 year old
messages, but you don't bother with recent ones? That would seem
to be the case, since you keep replying to old messages, but don't
see the ones that tell you you are doing so.

Michael

simplie compile kernel compile question

Posted: 06 Aug 2005 05:03 AM PDT

Andy Fraser writes: 

Your ISP is just forwarding your NNTP connections to Giganews. They "go
back years" because it is a selling point.
--
John Hasler
gt.org
Dancing Horse Hill
Elmwood, WI USA

Linux Boot Issue

Posted: 05 Aug 2005 09:45 PM PDT

com wrote:
 

You should be able to boot into Linux
using your first RedHat CD in rescue mode.
Then you can re-install grub with "grub-install /dev/hda",
 

You can install grub in a partition rather than in the MBR,
but I don't think there is any advantage.

Nb If I had had your problems with the Windows partition,
I would have started by saving the MBR with
"dd if=/dev/hda of=mbr bs=512 count=1"
and then if necessary it could be restored with
"dd of=/dev/hda if=mbr bs=512 count=1".


--
Timothy Murphy
e-mail (<80k only): tim /at/ birdsnest.maths.tcd.ie
tel: +353-86-2336090, +353-1-2842366
s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

Debian on HP Proliant DL385

Posted: 05 Aug 2005 12:58 AM PDT


it ha scritto:
 
[...] 
[...]

I've solved by installing via chroot lilo, with this /etc/lilo.conf :

boot=/dev/cciss/c0d0
root=/dev/cciss/c0d0p1
map=/boot/map
delay=20
vga=773
image=/boot/vmlinuz
label=Linux
read-only
image=/boot/initrd.img
append="console=tty0"

Rerunning lilo, and completing the installation process without
installing the bootloader, everything worked fine.

--
RaSca
it

Whither swap on system RAID0?

Posted: 04 Aug 2005 07:11 PM PDT

> Is it possible to use a swap _file_ under Linux, and if so, what is the 

It is possible to use a swap file. There is reportedly a performance
penalty, but I don't know how large it is. If you have enough RAM the
penalty won't matter, though.
--
John Hasler
gt.org
Elmwood, WI USA

Fedora 3 via Sam's

Posted: 04 Aug 2005 11:31 AM PDT

Final determination:

I rebuilt the system today and installed
ALL of the software on the CD's. The missing header
files were not there. So it seems to be a problem
between Redhat and Sam's.

Thanks for all the suggestions.

john slimick
edu
 

programing c with fedora core 3

Posted: 04 Aug 2005 08:56 AM PDT


"Bill Davidsen" <prodigy.com> wrote in message
news:OauIe.1367$news.prodigy.com... 

And buy a copy of the Kernighan and Ritchie book on programming C to learn
how it's done. I'd also recommend getting a good book on "make", because
you're going to want to bundle this stuff up.

That default compiler name of "cc" is actually a link to "gcc", the GNU C
Compiler. It's freeware, completely open source, and is one of the most
popular and portable compilers in the world.


Do I have to enable bridge if I want to make Linux box as Router (4-port NIC for local LAN and 1-port NIC for WAN)?

Posted: 03 Aug 2005 08:32 PM PDT

Guys:

Basically I would like to implement 802.1Q functionality, can somebody
point me whether do I need bridge to be enabled or not?. Most of the
answers tells me, I don't need bridge to switch packets from One
Ethernet (WAN side) to the other sidee (LAN side).

Thanks.

Install RH8.0 - Gigabyte GA-K8N SATA RAID motherboard.

Posted: 03 Aug 2005 10:48 AM PDT

gmarquez wrote: 

I would have said your job includes educating the ignorant, actually, as
well. But since you're into old software, Promise at one time made an
adaptor for IDE drives which allowed you to put two drives into RAID-1
off a single cable connection. So your controller thought it had one
drive, but in truth it had an itty-bitty RAID-1 array.

Several companies make a box of IDE drives which looks like a single
SCSI drive (or small number of same in JBOD) when in reality it's RAID
of some flavor. This allows you to use an obsolete but supported SCSI
controller from the last millenium.

Final thought, you could build the kernel as UML and run it under a
newer kernel, use vmware (maybe, netBSD works), or put the hardware on a
modern machine with proper backup and use nbd or NFS for the file system.

I would tell management that RH8.0 is like Win98, and that it's time to
move on. If your developers wrote code which is so non-portable that it
won't run with a recompile you have a non-technical problem, baaad
practices.

--
bill davidsen
SBC/Prodigy Yorktown Heights NY data center
http://newsgroups.news.prodigy.com

Mail server recommendations

Posted: 01 Aug 2005 09:56 AM PDT

exotic-scales wrote: 

Several suggestions... first, download something more recent and still
maintained, like Fedora Core 3 or 4. Second, they will set up sendmail
for you in a reasonable configuration. Sendmail now (last few years) has
a nice interface to spam filtering, which allows you to filter mail for
a group easily.

If you must provide Exchange capability you can do so, Google for some
suggestions. Note that Mozilla on Windows can use standard (POP3) mail,
if you want to get out of the Exchange business. Someone can probably
offer a suggestion for a groupware which uses shared schedules, the main
benefit of Exchange beyond mail.

--
bill davidsen
SBC/Prodigy Yorktown Heights NY data center
http://newsgroups.news.prodigy.com

custom filter Microsoft Project

custom filter Microsoft Project


custom filter

Posted: 23 Feb 2005 10:07 AM PST

Hi Majid,

Project/Filterer for.../More filters.../ select your filter/Edit.../and
check Show in menu.

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP



Majid wrote: 



cut and paste an ENTIRE screen image into PP?

Posted: 23 Feb 2005 01:33 AM PST

Hi Rob,

I use SnagIt for that purpose. However, this newsgroup is specifically for
matters dealing with Microsoft Project. I suggest you try to find a more
appropriate newsgroup that deals with, perhaps with Office problems.

Could you please tell us what led you to chose this newsgroup? We would
really like to know! :)


Mike Glen
Project MVP



abfabrob wrote: 



Text colour in entry table

Posted: 22 Feb 2005 06:17 PM PST

Hi Reen,

Welcome to this Microsoft Project newsgroup :-)

Maybe you have a filter set with the highlight function. Make sure it is
Project/Filtered for: All Tasks.

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP



calihdog wrote: 



Microsoft Project files?

Posted: 22 Feb 2005 02:25 PM PST


"jbalesano" <microsoft.com> wrote in message
news:com... 

Have them save the files as HTML, then you will be able to open them with
your browser.

Roland


Update enterprise project from a .mpp

Posted: 22 Feb 2005 01:17 PM PST

Thanks so much!

Mervin Williams


"Earl Lewis" <Earldotlewisatutahdotedu> wrote in message
news:phx.gbl... 


How do i assign one resource to two tasks...

Posted: 22 Feb 2005 01:11 PM PST

I'd just echo Gerards response and enter the hours of work in the resource
usage view on the dates you want him there. But if it were me, I'd bite the
bullet and carry each of those 50 branch audits as a separate task. Each
one of them can be scheduled independently, each one of them can be done by
a different resource if you had enough auditors, and I suspect that each of
them will be done in a separate physical location. That adds up to 50
different tasks, not one elongated task, to my thinking. You know your
project better than I do but I've found that trying to cut corners like that
ends up costing far more aggravation than it saves in the long run. I'd put
in a summary task "Branch Audits" and indent all 50 locations as subtasks
underneath it. And as a side benefit, you can glance at the Gantt chart and
tell the manager of the Main St branch that the auditor will be at his
location on Tuesday April 12.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"kcrump" <microsoft.com> wrote in message
news:com... 

'Publishing' plans...

Posted: 22 Feb 2005 08:05 AM PST

You're welcome, Michael, and thanks for posting your work around solution -
good luck :)

Mike Glen
MS Project MVP





Michael Murray wrote: 



Duration vs. Effort

Posted: 22 Feb 2005 07:49 AM PST

Hi, John and Julie,

Thanks both for the very detailed instructions. I managed to follow your
instructions without any problem.

Thanks again.
Tat



"JulieD" wrote:
 

SQL Version

Posted: 22 Feb 2005 06:43 AM PST

From what I have read the version of SQL that comes with SBS 2003 Premium
does not support Enterprise mode, just Team mode. That kind or defeats the
purpose of getting an enterprise-wide project management system. So I think
I need a full version of SQL. Of course, I have not tested that theory but
I might once I get my copy of Project Server.

Keith

"Lars Hammarberg" <se> wrote in message
news:phx.gbl... 


re-baseline

Posted: 22 Feb 2005 03:35 AM PST

Thank you very much, Jan.

"Jan De Messemaeker" wrote:
 

Dates Refuse To Move

Posted: 22 Feb 2005 02:35 AM PST

Hi James,

Make sure this is not selected: Tools/Options/Schedule tab - Autolink
inserted or moved tasks.


Mike Glen
Project MVP




James G wrote: 



I want to print an MS Project report to a .doc or .xls file.

Posted: 21 Feb 2005 11:33 AM PST

Hi Jeremy,

FAQ Item: 16. Project Viewer: FAQs, companion products and other useful
Project information can be seen at this web address:
http://www.mvps.org/project/

Hope this helps - please let us know how you get on :-)

Mike Glen
Project MVP



Jeremy wrote: 



Microsoft Word - word will not open 2003 doc documens

Microsoft Word - word will not open 2003 doc documens


word will not open 2003 doc documens

Posted: 24 Dec 2013 01:43 PM PST

Ever since I have installed office 2010 I have had problems opening word 2003 documents which were in fact created in word. I have seen a dialog box in saving docs about choosing to maintain compatibility of docx. with doc. This is astonishing, but could it be a cause of the problem. Meanwhile, when I try to open the same doc documents in word perfect--no problem at all, except that the outline format is off. Is there some choice in options or elsewhere which will overcome the issue?


Not all prior word 2003 docs but many, and I cannot figure why.

Dialog Error

Posted: 24 Dec 2013 11:43 AM PST

When I open Word I get the dialog box "C:\users\AppData\Roaming\Microsoft\Addins\C:\Program Files(x86)\ Nuance\NaturallySpeaking12\Program\dngword.dll" is not a valid office add-in.

 

After clicking OK 3 times the dialog goes away and the program functions normally.  I have Uninstalled NaturallySpeaking12. The directory Nuance\NaturallySpeaking12 does not exist. I have Uninstalled and Reinstalled Word to no avail.

 

How do I rid myself of this dialog? (Version Office 10)

Word 2003 Gridlines

Posted: 24 Dec 2013 10:25 AM PST

This is a strange one and is bugging me.  I have a 2003 word document with a table created on another machine.  The non-printing gridlines are double lines.  I am unable to figure out how the format of gridlines can be changed.




Kind regards

Exporting PDF - Set permission for print and copy to clipboard

Posted: 24 Dec 2013 09:51 AM PST

Hi there

I want to export a PDF from Word 2013, and prevent everyone from printing of copying the content to the clipboard. I can only find the options to set a user and owner password, but no option for setting print or copy permissions. Is there a way to set permissions for printing and copying to clipboard from the PDF, when exporting from Word 2013?

Office Dictionary

Posted: 24 Dec 2013 09:50 AM PST

Hello


I want to make a dictionary for Microsoft Office, starting from scratch - for a variation of Greek that is not currently available.


I don't want to exclude the spelling that is considered incorrect in this variation and add the correct one to the custom dictionary, as I want to be able to use the standard Greek dictionary when I need to. Actually, what I need to do is to change the spelling of most words, so creating the new dictionary by editing the standard would make things easier.


Is this possible? How can I do it?

Word 2k7 Autocorrect line returns

Posted: 24 Dec 2013 09:22 AM PST

Hi,

I'm having trouble in Office 2007 word. When I type out a word that causes Autocorrect offer "Press Enter to Insert" the rest of the word and I press Enter, it not only does not insert the word, it returns to the start of the next line on the page instead.

This issue is driving me nuts, can someone offer suggestions here? It was previously working in word 2003.

For example: 
If I type "Febr" it shows the little grey bubble with this exact wording: "February (Press ENTER to Insert)" . I press the enter key and it doesn't insert the full word, it just moves to the next line.  

any thoughts?

Thanks for reading,
- Mike

Linking data (single cell or row) to Word 2010 uses absolute cell reference

Posted: 24 Dec 2013 08:57 AM PST

I have an excel spreadsheet where I want to link only a single cell (A10) to a Word 2010 document.
However when a insert a row above A10, it updates Word and shows the data that is in A10, instead of A11.
The same happens if I sort the excel document.

For some reason, Paste link uses absolute cell reference instead of relative cell reference
This only happens if I link a single cell, or several cells in one row. Once I link cells in 2 rows, Excel uses relative cell reference.

How can I get Excel to use relative cell reference when linking one cell?

I copy cell in Excel.
In Word - Clipboard - Paste Special - Paste link - Microsoft Excel Worksheeot Object (or Formatted Text) - OK

I'd be thankful for any suggestions

Creating a Macro for Resizing several photos in Word while keeping the aspect ration

Posted: 24 Dec 2013 08:53 AM PST

I am looking to create a macro that will resize photos in Word.  I bring in a number of photos, some are horizontal and some are vertically oriented.  There are different amounts of photos each time I do this.  I would like to have a macro that will resize all the horizontally oriented ones to a height of 3.3" and the vertically oriented ones to a width of 3.3".  The aspect ratio needs to be maintained for each photo. 

 

I've been trying the code for programs like this and I was able to use one, but it didn't distinguish between the different orientations.  I was thinking that if the macro was written to check the photo so if the height divided by the width is greater than 1, then it would make the width 3.3".  and if not, then it would make the height 3.3". 

 

Also....after the photos are resized, I want to add a couple of lines of text that would be beneath each photo.  Would it be easier to add the text at the same time as the resizing of each photo, or have a separate subroutine that runs after all the photos are resized? 

 

My problem is that I have only taken one VB class and it was several years ago.  I understand loops and if/then statements, just don't really know how to code it. 

 

Any help would be appreciated. 

 

Joan

Re office 2010 starter--program icon on screen--mistake

Posted: 24 Dec 2013 08:28 AM PST

I have a new laptop with win7, and after installing office 2010 starer I clicked on the icon and drug it to the desktop screen. I thought I was just creating a shortcut, but it acts like it is the program. I don't want it to be on the screen like a shortcut.  How can I get it off the screen and back to where it should be as before? singingjack. 

initializing Office in a second computer

Posted: 24 Dec 2013 05:47 AM PST

I bought and paid for a legitimate copy of Office Home and student 2010 in the summer of 2012 and used it on a new Sony laptop for about a year. Two weeks after the warranty on the computer expired, it collapsed on me and despite several expensive efforts to resuscitate it by the nearest Sony service station I junked it. I replaced it with a Samsung laptop but have been unable to initialize Office on it. Obviously, the problem is they think I am using a pirated copy. Is there any way to get around this problem?  

Is it possible to insert formulas by script in Word or Excel?

Posted: 24 Dec 2013 05:00 AM PST

A few days ago I tried to use LibreOffice, and I found that it's  convenient to insert formulas just by typing script in LibreOffice. For example, if I want to insert a formula of the integral of sine function, just open the formula script window and type "int from a to b sinx dx". It's faster than just by clicking or moving cursor up and down. Is there any similar way to insert formulas like that? MS Office is good, and would be better if such function is added.

page setup in word

Posted: 23 Dec 2013 11:54 PM PST

I setup page for legal size , now I want it to print it on A4. How can I perform it.


Find phrases with Spell Check, or modify Grammar Check?

Posted: 23 Dec 2013 11:36 PM PST

In Word 2010, I use the dictionary exceptions file to identify as misspelled words in my firm's style guide that I have not memorized; however, the dictionary is limited to single words.

Is there a way to force Word to search for text strings that include a space character, and if so, how?

If not, for the grammar checker, is there a reference file similar to the spell checker's dictionary, and can I get into it?

Finally, if the grammar checker is instead entirely programmatically driven, is there a way to get at it and modify it?

insert wingding characters word starter 2010

Posted: 23 Dec 2013 11:08 PM PST

How to insert wingding and other characters like phone symbol in word starter 2010

Word 2013 is reporting the incorrect user agent to the website

Posted: 23 Dec 2013 06:16 PM PST

Hi all,
   First off, I'm under an NDA so I can't provide weblinks. That said, we have an author that is sending out Word Documents with hyperlinks to one of our websites. However when she clicks on the links in Word 2013 on her new Dell XPS (with the latest IE version she says) the User Agent is being reported to our server as IE7 and prompting her to upgrade her browser to the latest version of IE.
   At this point I'm uncertain if she has fully updated her current version of Windows, but if she's still having an issue after that, could someone direct me toward where to look to fix what Word is declaring/seeing as the User Agent?
   I know this is vague, so if there are too many questions pertaining to what may be causing this, let me know and I'll get the required data.
Thanks in advance for any help.
Cheers!
ESTV

why wont shapes stay where i save them when i re open a document???

Posted: 23 Dec 2013 05:30 PM PST

basically i have a colour spectrum in my document and i need to create different sized black sections to go over the top of some parts.
i use insert>shapes>rectangle and then edit it to gradient fill with black and fading to transparent to place over the top of the coloured section. 
when i have placed it where it needs to go i save it and close the document. when i re open the document these black sections have changed position and arent as a gradient fill anymore. they are just plain black or a completely random colour like grey or blue. can anyone tell me why this is? i have asked so many people and get told about wrapping and formatting but have done everything they suggest and it still wont stay where i put it. other than that, no one has ever heard of this problem and im at a loss for what to do. please can someone help?
i have 2010 microsoft word starter if this makes a difference. 

Can I make the "save as" box small again?

Posted: 23 Dec 2013 03:28 PM PST

I have 2003 version of WORD and at some time I hit the wrong key so that now when I save a word document the save box is the entire screen. I have to place the curser all the way down to the lower right of screen. Before, the save box was very small and that made it easier to save documents.   possible to make the box small again?

 

Thank You,

Tom Rawlings