Pages

Search

Microsoft Word - In a template, how do I have the current file name in the first page footer, but only in the first section?

Microsoft Word - In a template, how do I have the current file name in the first page footer, but only in the first section?

In a template, how do I have the current file name in the first page footer, but only in the first section?

Posted: 27 Feb 2013 07:14 AM PST

I have created a template with the current file name in the first page footer.  If I create a document from the template, and then add a section break, I get the footer on the first page of the second section too.  How can I change the template to avoid this?

I have tried adding a section break, making the required changes to the definition of section 2, and then deleting the section break, then saving the template.  But this does not seem to keep the changes - the section 1 footer comes back again if I put a section break into a document.
I don't want to leave a section break in the template, because most of the time it will be used for single section documents.

Setting the pitch does not work properly, I get a real small font when I set it for 12; others are smaller than what I set

Posted: 26 Feb 2013 07:56 PM PST

The font setting does not give the font that I set.  A 12 pitch looks like about a 6 or 8.  To get a decent size I must increase the number for the font.  How do I get the computer to set the font like it appears on the screen when you go to the place where  you set the font?

Creating reference lists with returns in Word 2007

Posted: 26 Feb 2013 02:46 PM PST

I am trying to create a word document that has several sections in it.  I want to create a list at the beginning of the document that will allow somone to go to that section by just clicking on the list item.  I would also like to add to the bottom of each topic a "return to top" link that they can click on and return to the list.  Very similar to the way your guys lists are in this forum.  This seems to be done in a different way than using hyperlinks.

two pages into one

Posted: 26 Feb 2013 12:05 PM PST

** HELLO:  IS THERE A WAY to "merge", "combine", "format"; whichever the term to use, a two page document into one page.

    On my "so-called" 'second' page, which is really a ONE PAGE, (I think), but came out as a two page document. It shows that I

    have one of those little white lines running thru it, its not really a break, but it does separate it so that when I go to print it, it

    does come out as two pages. HOW DO I GET RID OF THAT line separator so that when I go to print that page, its all on one

    page. I also want my text to follow up to that one page. I tried to 'shrink' it, but to no avail.

    WOULD APPRECIATE YOUR HELP.

   LOU

New custom bibliography style does not appear in bibliography style list

Posted: 25 Feb 2013 04:51 PM PST

I am using Word 2010 with the latest service pack. I am trying to create a new bibliography style.  I have tried the process described on blogs.office.com whereby you create your own bibliography *.xsl file using another style file as a pattern.  I took the turabian.xsl file, for example, and made a copy of it named MYFILE.XSL.  In the new file, I replaced the only occurrence of "Turabian" with "MYFILE".  This is the only change I made, just to see if I could get the new style to show up in the bibliography style list.  Even with that as the only change, MYFILE does not show up in the bibliography styles list. 

 

I tried making the same change to the turabian.xsl file ("turabian"->"MYFILE") in an attempt to see if I could edit that file rather than adding a new style, but "Turabian"  disappeared completely from the bibligoraphy style list.

 

Other articles I have read seem to indicate that this process which was written for Word 2007 should work the same way for Word 2010.  (Of course, I am using the bibliography style files from word 2010 as the template.) Can anyone advise me what I am doing wrong, or does this not work in Word 2010?

Thanks!

cannot preview mail merge

Posted: 25 Feb 2013 10:58 AM PST

I've recently started using a different PC (running Vista), and I've noticed that Word is not converting hyperlinks and mailmerge fields. I'm now trying to run a mailmerge created on my old computer, and although I've selected 'Preview Results' I'm not seeing any data. If I select the field and 'toggle field codes' I get the data, but as soon as I go on to the next record I'm back to square 1.  The data is being merged from an Access database (.mdb) file. Any ideas - please!

Document Structure Tags - removed as a default.

Posted: 25 Feb 2013 09:24 AM PST

I want to save M.Word documents as PDFs but don't want the document structure tags on.  I know I can uncheck the box each time I wish to convert the document, but is there a way of making this the default without choosing the minimise optimisation option.  My reason for wishing to remove the tags is, when displaying a PDF with an image electronically, when hovering over the image, the image name appears and I don't want to have to change all the image names.  Thanks

Copy two page from doc file and save in new doc file with excel creteria.

Posted: 25 Feb 2013 02:46 AM PST

Hi, Team

I need help to copy two page from Master doc file and save in new doc file with excel creteria,Master doc file have 200 page every two page macro should copy and save in new doc file with excel creteria.
1 and 2 --save in doc file ---with name 03652 excel file creteria.
3 and 4---save in doc file ---with name 03653
5 and 6---save in doc file ---with name 03655
7 and 8---save in doc file ---with name 03657
9 and 10--save in doc file ---with name 03660
like this--

any help appreciate greatly

Place last year in doc

Posted: 24 Feb 2013 06:52 PM PST

I want to update the following statement in a mail merge doc " This is for the year XXXX" . XXXX is last year

Unable to choose languages while using Translator in Word 2010 because the language list does not appear from drip down menu

Posted: 23 Feb 2013 05:54 PM PST

On my newly purchased hp desktop, Translator in Word, Office Home and Student 2010, does not work.  After I click Review/Translator/Choose Translation Language, in the opened window, two problems:

problem 1 - Under 'Choose MiniTranslator language', the drop down menu only show 4 languages instead of full list ususally more than 30 ( the same software on my laptop, from that list I can choose my desired language ).  Unfortunately I do not see my desired language among the four languages.

problem 2 - Under 'Choose dcument translation language', no language list from drop down menu appears both in the boxes of 'Tranlate From" and "Translate To'  Message shown in both boxes is 'Services not available'.

I also use Word in Office Home and student 2010 on my laptop. Translator in Word does function well.

How do I solve this issue, please.

orchidlover868

Using English and Spanish simultaneously in Office 2010

Posted: 22 Feb 2013 09:15 AM PST

What features of Office 2010 should I enable if I am a student of Spanish?  I need to be able to type proper characters in Spanish and spellcheck my documents.  We are studying "International Spanish", so everything goes as far as that is concerned.  I need to add the ability to type those eight extra characters that Spanish uses.  Will I be able to toggle between the languages?  And/or, how does this all work?

Microsoft Word - Office 2003 help text size

Microsoft Word - Office 2003 help text size

Office 2003 help text size

Posted: 26 Feb 2013 12:03 PM PST

I am using Windows 7 X64 with Office 2003 Professional. The problem I am having is if I'm in Word, Excel, Access, etc. when I want to use the help function the text is very small.

 

How do I increase the size of the text in Help functions.

How to format a TOC

Posted: 25 Feb 2013 07:18 PM PST

Could somebody advise how to format a TOC, in particular how to use the TOC styles?

 

When I click on the TOC, the entire TOC is selected, so I don't see how I can format the different levels of the TOC individually.

 

I would like to do things like having Headings 2 not boldface in the TOC and boldface in the document.

 

Thanks

I HAVE a pdf file i want to copy/paste in word 2000 it has english and hebrew legacy in the pdf -ques-how can i get both to show properly?

Posted: 25 Feb 2013 05:47 PM PST

I HAVE a pdf file i want to copy/paste in word 2003 it has english and hebrew legacy in the pdf -ques-how can i get both to show properly?

Microsoft Word

Posted: 25 Feb 2013 05:45 PM PST

Is there a way I can edit an existing document by displaying it next to a blank page?  (side by side on same screen)

Cannot open the Word document edited resent by the instructor.

Posted: 25 Feb 2013 04:39 PM PST

Original title: Microsoft Word

 

I am taking an online class. The instructor grades the paper and resend it with feedback on it. I can never view her feedback. She sends it back through docx, when I was able to view she resent it through odt. I have Microsoft Word 2007. Does anyone know why i can not view my papers. She also sends it back through my e-mail.

TOC without links

Posted: 25 Feb 2013 02:33 PM PST

I would like to copy the TOC from several different files and paste them in a new file. I want them to LOOK exactly like they look in the native file but not have any functionality and not update (which causes the "error!" to populate). I read a post on deleting the bookmarks and tried to do that, but when I look for hidden bookmarks, none show. Surely this can be done and I am missing something? Any help will be appreciated.

Why Word cannot import text from a valid Pdf ?

Posted: 25 Feb 2013 08:52 AM PST

I use the new feature "Pdf reflow" but only the image is imported.
I use adobe preflight (Abobe PDF validator) and eveything seems OK.
The text is accessible inside the pdf, I can copy paste it inside Word.

Here is an example :
https://docs.google.com/file/d/0B6DblRLqIfT7MFhNZlVZc2w3eTA/edit?usp=sharing

Why Word cannot import text from a valid Pdf ?
Any idea ?

Make Word documents stop cascading

Posted: 25 Feb 2013 08:31 AM PST

How can I get my Word documents to stop cascading?  I need to them to 'pile up' on my desktop as though they were a pile of paper on my desk.

Mail Merge Help

Posted: 25 Feb 2013 05:56 AM PST

I have created a mail merge from in Word 2007. It merge the information from excel in to the document however, not all the characters are moving over.  Basically it cuts off mid sentence. Any idea's as to why it does this & how to fix?

I am working with Windows 8. How do I create a shortcut for Word on my desktop?

Posted: 25 Feb 2013 03:08 AM PST

Since switching to Windows 8 everything is available as an application (App). However, I wish to put Word onto my desktop as a shortcut. I can pin it to the task bar, but not make it an icon on my desktop. How do I do that?

How can I gParty invitatiaon ideas?

Posted: 25 Feb 2013 01:11 AM PST

How can I get a colorful background and import some pictures to do a party invitation and send it as an attachment?

I want to send a party invitation, but I would like it to look colorful.

Place last yeas year in doc

Posted: 24 Feb 2013 06:52 PM PST

I want to update the following statement in a mail merge doc " This is for the year XXXX" . XXXX is last year

when typing cursor jumps to another sentence

Posted: 24 Feb 2013 05:41 AM PST

I just bought a new computer with Windows 8, and the last Microsoft Office Student. But when writing a paragraph and typing a sentence the cursor jumps to a previous paragraph. Because I am concerned with typing I did not realize that the words I am typing are being inserted in a different sentence, or paragraph. This is turning to annoys me.

I would appreciate the help you can give to solution this problem.

How do I switch between open documents in Word 97?

Posted: 23 Feb 2013 12:11 PM PST

I have two open windows in Word 97 but cannot easily switch between them.  Is there a keyboard command?

 

Word box or menu blocks the text

Posted: 21 Feb 2013 09:02 AM PST

Frequently when I copy and pastesomething in Word, including using the Clipboard,  I then get harassed by a little bar or window blocking some part of the text.  Inevitably, it blocks a part of the text I want to see.  Evidently it wants to do some more pasting.  I made a picture of it but since there is no way to include it here, all I can do is try to describe it.  It's a yellow-bordered box with the Clipboard icon to the left of "Ctrl" and a down arrow on the right.  Well now it has disappeared so I can't describe it any further.  What is it and how do I get rid of it without sitting around waiting for something to happen?

Error Message - Application is in use by another user or application

Posted: 21 Feb 2013 08:50 AM PST

I am using Office 2010 (Windows 7) and when I close a WORD document I constantly get the error message that this application is in use by another application or user.  I have tried to re-install Office.  I am a stand alone computer with no other users.  How do I stop this from happening please!

After inserting an object – pdf – Open dialog box keeps appearing.

Posted: 21 Feb 2013 07:58 AM PST

Hello,

I am helping a friend with a very large document. We have inserted a couple of pdf documents (both one page documents) as objects. Now, for some reason, the Open dialog box keeps showing up. Any ideas what I did to cause this and/or what I can do to make it stop showing up?

Thanks

David

Open Office - [discuss] New idea to compete with Microsoft Office Power Point

Open Office - [discuss] New idea to compete with Microsoft Office Power Point

[discuss] New idea to compete with Microsoft Office Power Point

Posted: 13 Oct 2006 08:21 PM PDT

On Sat, Oct 14, 2006 09:19:12 AM -0500, Max Vallejo Reyna
(com.mx) wrote:
 
 

No. Or, more exactly, the difference in size will be small enough to
not justify the effort to create it. At least, this is the answer
which has always been given on these lists by the developers, for years.
If this has changed lately, all the better!
 

This is a dumb objection. You can/have to get portable openoffice just
once. And you can do just like you are doing with OpenOffice, ie, in
your words:
 

So, if the problem is only how *you* can plug your USB drive in
somebody else'se windows computer and run the Impress presentations on
that drive _yourself_, just put also portable openoffice on it
(without any packing, zipping etc...) and use it to run the
slideshow. That way, it will also be publicity for OO.o, since the
participants will see the real thing in action.

If you want to _distribute_ the presentation instead, then try to
convert it to Flash as others have suggested and if it works forget
the .exe route (I don't know how complete Flash conversion is, never
used it myself).

Ciao,
Marco

--
The right way to make everybody love Free Standards and Free Software:
http://digifreedom.net/node/73

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] DBCS() or JIS() function on Excel

Posted: 12 Oct 2006 08:01 AM PDT

Hi, Paul and all

Hmm, that's quite strange that what you mean differs from Eike's report.
We have to continue our efforts to collect helpful information about
this problem.

According to Microsoft Office Website, the name of the JIS() function
depends upon the language you use. In addition, the functionaility
might differ from Japanese version.
http://office.microsoft.com/en-us/assistance/HP052508381033.aspx

Anybody especially who has other localized versions of Excel, I wonder
if you could tell me what the name of JIS() function is in your
localized version and how the function works.

Regards,
--
Japanese Native-Language project
Takashi Nakamoto
plala.or.jp

On Fri, 13 Oct 2006 08:33:23 +1300
Paul <com> wrote:
 


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Recent Survey Answers

Posted: 11 Oct 2006 10:12 AM PDT

On Wed October 11 2006 06:44, + Daniel Drake wrote: 

There are several areas you can help in. I would recommend the QA project
http://qa.openoffice.org as help is always needed to help the developers
reproduce bugs.

--
CPH : OpenOffice.org contributor

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] OpenOffice "Viewer"

Posted: 10 Oct 2006 10:22 AM PDT

Paul wrote: 

and add the Firefox extension:
https://addons.mozilla.org/firefox/1888/
which displays OpenDocument files without loading OOo.

Uwe

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Language improvement

Posted: 10 Oct 2006 01:37 AM PDT

Hi Nathan,

"Nathan Murtha" <com> schrieb:
 

Have a look at http://fr.openoffice.org
You should be able to find there the possibility for downloading the
software in french. ;)
 

Thanks, we all try our best.

Hope, the given link helps you.

Sigrid

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

Microsoft Word - how to accept all Autocorrect suggestions in document?

Microsoft Word - how to accept all Autocorrect suggestions in document?

how to accept all Autocorrect suggestions in document?

Posted: 25 Feb 2013 07:11 AM PST

Is there a way in which I can accept ALL of the Autocorrect suggestions in Word 2003, rather than clicking on each 'red squiggle? The document is about 75 pages long, and I have about 25 'suggestions' per page, most due to formatting errors when I deleted extraneous paragraph marks. [Replacing 'Paragraph Mark' with 'Paragraph Mark Space' simply creates an extra space in other locations].

I'll appreciate any help.

Thanks.

Mike

Can I show stages of change with track changes?

Posted: 24 Feb 2013 04:01 PM PST

Here's the situation:

 

Contractual documents have been created, and then we were asked to make changes to them, using track changes. We did that, and it's all wonderful.

 

Now, they want us to make further changes, using track changes, but retain the original changes. So, somehow we need to make changes and use track changes to show a difference between the original changes, and the new changes.

 

Apparently this functionality is available in some legal document software (name unknown), and the lawyers assume that we can do a similar thing in Word 2007. I just can't seem to work out how it's done.

 

Help?

I bought a new all in one computer on 02/13/20013 and was told that I had a free 180 day trial of Microsoft Office 2013. I have been unable to try out any of the Office apps.

Posted: 24 Feb 2013 11:09 AM PST

When I go to WORD or EXCELL or POWER POINT it does not let me do any procedures on with the app. It only shows the red bar stating it is an unlicensed program.  How do I access the free trial of these apps?

 

Office 2013 Recommendation when word can't be found on WinXP

Posted: 24 Feb 2013 11:06 AM PST

On Windows XP, if you try to open a Word document and Word can't be found, you get a message saying that if you have no office at all, you can try office 2013 for free. There's nothing wrong with that, only the fact that you can't run Office 2013 on Windows XP as the system requirements say that you need to have Windows 7 and up.

It's not a terrible issue, but I recommend that the web app gives a different recommendation if it detects the browser's user agent is reporting the OS as Windows XP. I thought about Microsoft Offering Office 2010 for XP and Vista users only, and everyone else can use 2013.

Wdsendtoemail vs wdsendtonewdocument

Posted: 24 Feb 2013 09:07 AM PST

Word 2013 merge
I want to do a mail merge of orders to suppliers
Some have an email address and some don't
The merge should produce a form for all,suppliers and should email those with an email,address.
I've been in this for weeks.

Office 2013 Word crashes during selecton of page orientation and margins

Posted: 22 Feb 2013 08:32 AM PST

I installed Office 2013 from the cloud on a rather slow wired connection. The problem occurs in Word (and Excel) when, during the selection of page orientation, margins, etc, the software crashes. The green top bar states that "Microsoft Word is not responding." After waiting 30 minutes, the system was still not responding. I have attempted to repair the download and uninstall/reinstall to program several times, without success.

microsoft office word 2007

Posted: 20 Feb 2013 08:27 AM PST

microsoft office word 2007 yi indirmeye çalıştım ama pencerede bu üründen etkilenen bir ürün yok dedi nasıl düzeltebilirim?

Suggestion

Posted: 19 Feb 2013 06:14 PM PST

I'd like to suggest the addition of a vertical split option in MS Word. This way I could divide my view into two different and simultaneous pages in my screen.

How do I get Level 1 left-numbered TOC entries to allign right?

Posted: 19 Feb 2013 05:03 PM PST

My Level one TOC entries are numbered on the left:

7. blue...............
8. pink................
9. red...etc.
10. green...............

when double-digit numbers allign left, the section title line goes out of alignment. 
Is there a way to align the numbers right (so the zero in the ten is below the nine?)

Word 2013 error message error Word was unable to start (24).

Posted: 19 Feb 2013 02:42 PM PST

When I try to attach a document from Word 2013 any of my online email accounts (gmail, Hotmail, and yahoo), I get an error message, "Word was unable to start (24)"  It does not happen when I attach an email with Microsoft Outlook 2013

 

This has only recently started happening. 

 

If anyone has heard of this or has a fix, your help or input would be greatly appreciated. 

 

Thanks,

ninabeena

Neuinstallation von Office 2013 - Fehler bei Start von Word

Posted: 19 Feb 2013 02:13 PM PST

Ich benutze das Betriebssystem Windows 8. Nach der Installation von Office 2013 öffnet sich das Programm Word nicht. Es wird eine Reparatur angeboten. Zunächst startete ich eine Schnell-Reparatur. Danach eine weitere Reparatur über Internet. Diese Reparatur wurde mit folgendem Hinweis abgelehnt:

"Leider können wir Ihre Office-Produkte nicht installieren, weil Sie kein modernes Windows-Betriebssystem besitzen.
Für die Installation dieses Produkts benötigen Sie mindestens Microsoft Windows 7". 

Bevor ich Word öffnete starteten die anderen Office-Programme normal. Durch den Reparaturlauf aber sind sämtliche Office-Programme nicht mehr aufrufbar.

An was kann das liegen?

Open Office - [discuss] How do you export a Table in Writer as an EPS?

Open Office - [discuss] How do you export a Table in Writer as an EPS?

[discuss] How do you export a Table in Writer as an EPS?

Posted: 08 Oct 2006 09:35 AM PDT

On Sun, 2006-10-08 at 23:23 -0700, Stu77000 wrote: 

That would work. Its hardly a major inconvenience to create a table in
OOo and cut an paste a metafile into Scribus. Once in that format you
can scale and position it so getting exactly right is not that
important. The only real issue is that if you need to edit the table you
have to go back to OOo and do a bit of cutting and pasting but is hardly
that big an inconvenience.
 

What is it in Scribus you need that you can't do in Writer and Draw?
Maybe you could just design the whole thing in OOo?

Ian
--
www.theINGOTS.org
www.schoolforge.org.uk
www.opendocumentfellowship.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Editing MySql

Posted: 06 Oct 2006 04:08 PM PDT

this questions can be answer faster at the openoffice.org mailing list

On 10/6/06, Tomas Lanczos <sk> wrote: 


--
Alexandro Colorado

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] damaged sxc-files by using them?

Posted: 04 Oct 2006 02:38 AM PDT

Morgan Ohlson wrote: 
It can't hurt to try this. I've used the procedure to renovate a test
file in which even simple formulas were returning manifestly incorrect
results.

Open a new spreadsheet and import the sheets from the old file using
Insert >Sheet from file.

Regards.

--

If you're seeking, check out http://www.rci.org.au

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Unknown error forking main binary

Posted: 03 Oct 2006 05:04 AM PDT

It looks as though I forgot to mention that you should rename / delete /
move files after exiting OpenOffice.


Terry wrote: 

--

If you're seeking, check out http://www.rci.org.au

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Blinking Cells in Calc

Posted: 03 Oct 2006 01:09 AM PDT

Hi,

to get different cell styles applied within one cell you can use the
STYLE() function.

eg.

put a value like 4 into cell A1

Open the stylist (menu item /Format/Styles and Formatting) and create
two cell styles (named red and green) and define a background color
(red/green)

into another cell type in this formula

=A1+STYLE(IF(CURRENT()>3;"red";"green");5;"Default ")

info: style names (as every string based parameter) need to be quoted

If the sheet is recalculated (can be manually forced by typing
Shift+Ctrl+F9) then the cell gets the style "red" first (because the
value is >3) and after a break of 5 seconds it gets the style "Default".
If you use a shorter update time then it's some kind of blinking - but
only for one time.


Kind regards, Joost
 

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] open office writer suggestion

Posted: 01 Oct 2006 07:24 AM PDT

Actually a bug report,

I went to the site and found it down.
I'll forget if I don't send

I pasted a b&w gif with white masked into writer as an illustration,
and the program reversed the colors.
it came up black background light image.

printed that way as well.

got to go.

Gene



---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] need help customizing keyboard shortcuts

Posted: 30 Sep 2006 11:47 AM PDT

On 1 Oct 2006 at 9:35, Terry wrote:
 

I have just exprimented and been able to set Ctrl-Shift+K to Decrease Font and Ctrl-Shift+L to Increase Font in Writer using Tools > Customize > Key > Keyboard. These conmbinations then change the font size of selected text.

I would like to be able to configure the familiar Ctrl-Alt+< and Ctrl-Alt+>, as
used by Word as I find them quite intuitive, but it seems that neither Ctrl-Alt
combinations nor > and < are configurable in OOo 2.0.3.

Also, I am using Windows XP at present. I might boot into Ubuntu later and
try it there as well.

Tony Pursell

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Fwd: Returned mail: see transcript for details

Posted: 28 Sep 2006 10:01 PM PDT

On Fri, 29 Sep 2006 08:12:20 -0400, Adrian Try <com> wrote:
 
you know what? that make total sense to me, and yes there could be doing
that. I have seen the header of the email and some stuff spark up as odd,
first they seem to be an address from the embassy of colombia which could
be one an alien address at the email header. So zombie machines could be
spoofing the address :(

I dont think there is much we could do.


--
Alexandro Colorado
Grupo de Usuarios Linux Tabasco
http://www.gultab.org

OpenOffice.org
Community Contact // Mexico
http://www.openoffice.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Document saving problem

Posted: 27 Sep 2006 12:25 PM PDT

Make sure of the filetype when saving and select the box labelled
"Automatic file name extension".

If the problem persists, there may be something wrong with your "user"
folder.

Phillip Yagla wrote: 

--

If you're seeking, check out http://www.rci.org.au

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] emergency formatting

Posted: 27 Sep 2006 05:09 AM PDT

Hi, Martin. To stop numbering, Format >Paragraph. Select the
"Numbering" tab and for "Numbering Style", choose "None".

Martin Yazdzik wrote: 

--

If you're seeking, check out http://www.rci.org.au

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] reference management with OOo writer ?

Posted: 27 Sep 2006 01:25 AM PDT

On Saturday 07 October 2006 6:07 pm, you wrote: 
te 

The OpenOffice bibliographic project expects to have "referencing" results =
in=20
less than a 'deadly long time'. I am not sure what you mean about=20
'interactive documents'.

http://bibliographic.openoffice.org

regards

David
 

=2D-=20
=2D------------------
David N. Wilson
Co-Project Lead for the Bibliographic=20
OpenOffice Project
http://bibliographic.openoffice.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

Microsoft CRM - Office 2003 Support

Microsoft CRM - Office 2003 Support

Office 2003 Support

Posted: 25 Feb 2004 03:28 PM PST

Hi all,

The MS Outlook requirements for MS CRM Sales for OutLook v.1.2 are:

Microsoft Office 2003 Editions
OR
Microsoft Office XP (2002) with Service Pack2
OR
Microsoft Office 2000 with the following additional requirements:

Microsoft Office 2000 SR1 (Available at www.microsoft.com\downloads)
Microsoft Office 2000 SP3 (Available at www.microsoft.com\downloads)
Microsoft OutLook 2000 Post-SP3 Hotfix (228512) (Available at
www.microsoft.com\downloads)


Thank you, Jose Luis Alvarez,
Microsoft Business Solutions Support

This posting is provided "AS IS" with no warranties, and confers no rights.
You assume all risk for your use. © 2003 Microsoft Corporation. All rights
reserved.

Usage Monitoring

Posted: 25 Feb 2004 11:04 AM PST

you'll probably find the IIS logs are turned on by default.
you can find the logs in this directory

C:\WINNT\system32\LogFiles\W3SVC1

Typically the web server creates a new log file each day.
In my case i had over a years worth of log files so how the heck to analyse
them?

Easy..I wrote a 30 line excel vba macro that opens up each logfile and then
reads each line and updates a spreadsheet. The end result is that I have a
list of users and the number of times they have access and also the date of
their last access.

Note the count of user accesses is telling me that they connected to crm for
count one, then opened an opportunity form then opened a lead form. In this
case this would equal 3 accesses.











<microsoft.com> wrote in message
news:1a8701c3fbf9$b3bd9340$gbl... 

Our MSCRM left and I cant get in

Posted: 25 Feb 2004 10:31 AM PST

Brad

there is an issue where the crmsecurityservice relies on SQL and needs to
wait for SQL to start before starting itself

to stop this happening open a command prompt on the crm server and go into
the directory

c:\program files\microsoft crm\server\bin
then run this command line

crmsecurityservice -r s




"Brad" <microsoft.com> wrote in message
news:16d901c3fbcd$95934530$gbl... 

opinion

Posted: 25 Feb 2004 08:48 AM PST

Hi Karen,
Just thought I'd add my bit of experience here, as an end user who has
bought and installed MSCRM without any assistance from a 3rd party
consultant. We are in Zurich Switzerland and desperately needed to replace
ACT as our contact management application. We needed something scalable,
robust and that integrated with Outlook.
After a couple of months of research and testing of other solutions, both
cheap and very expensive, I decided to opt for Microsoft's offering. Being a
Microsoft house in terms of end user and recently having upgraded our
infrastructure to Server 2003, Exchange 2003 and Office 2003, it seemed the
obvious choice.
I was able to download CRM 1.2 through our license agreement with Microsoft
and set it up in a test environment.
Many of the dealers in Switzerland were unable to give me any useful
information so doing this myself was the only answer and it was definitely a
useful experience.
Providing you have all the prerequisites done (follow the deployment manual
and you can't go wrong) installing the server was fairly straight forward
and took just over an hour including SQL Server.
I had to do this very quickly indeed and we had our production server
installed and ACT data migrated in just one weekend. Ok, I only have 15
users, but these users are all Marketing people who have very specific (so
they tell me) needs and being able to customise CRM on the fly is of great
help. I don't need to shut everything down each time I change a form or
create a view. We also have users who are spread out globally (Geneva,
Stockholm and New York), who connect via VPN and we will be including some
of our Partners giving them access via the Internet. This requires something
very robust and secure MS CRM can meet these needs with ease.

Having said that however, there are 2 major shortcomings that our users have
found particularly annoying about MSCRM, this is from users used to the
openness and ease of use of ACT.
1. No facility to include an attachment in a Direct Mail message. Creating a
normal email activity means you cannot send an email with an attachment to a
list with more than 100 contacts, you have to do this 100 contacts at a
time.
2. You cannot customise any of the Activities views. I'm sure this is
possible through the SDK but no one has yet to tell me how.

Version 2.0 is slated to be coming towards the end of the year and as a
customer we are in a position to suggest what can be included in the new
version, but for now we are making do.

Being .NET and reasonably open MSCRM can easily be integrated into other
systems and we will be looking at how Web Services can be used to allow us
to copy contact data into our Oracle system, whilst using Oracle Web
Services to be able to view our product performance data from within CRM.

Another very positive note, is that when you purchase MS CRM, you get an
excellent support package directly from Microsoft and I have been making
full use of this. It includes access to an extensive and very useful
Knowledge base.

I hope this helps and enlightens you.

Paul

--


---------------------------------------------------------------------
"Eliminate annoying spam!
My mailbox is protected by iHateSpam, the #1-rated spam buster."

http://www.ihatespam.net


"John O'Donnell" <com-nospam> wrote in
message news:%23lbvDdC$phx.gbl... 
terms 
be 
only 
regrets. 
I 
product. 
us 
MSCRM. 
needs. 
are 
help 
day). 
B 
doing 
tend 
it 
will 
my 
to 

Email button

Posted: 25 Feb 2004 08:44 AM PST

Hi Rich, either users can use the "Regarding" field to associate the email
with the case, or, instead of having your form redirect right away, do this:

1) Have your form create a new email, using the CRM SDK, and associated the
email with the Case ID that is passed to your form from the case form.
2) After your form has created the email, bave your form redirect to the CRM
email form, passing the ID of the new email.

The user will then be able to edit and send the newly created email.

Mike


"Rich" <microsoft.com> wrote in message
news:19b201c3fbeb$553d4170$gbl... 

Error login with user distinct to Administrator

Posted: 25 Feb 2004 07:34 AM PST

Hi Mike, thank you for your quick answer.

Well, in the System event log appears (it is in spanish):
Error KDC
"Hay múltples cuentas con el nombre HTTP/portcticrm.portcrm.com de
tipo DS_SERVICE_PRINCIPAL_NAME"

In english it sounds like (I think so...)
KDC Error
"There are several acounts with the name HTTP/portcticrm.portcrm.com
of type DS_SERVICE_PRINCIPAL_NAME"


I'm thinking about a error related with DNS, but I'm not sure and I
don't know how I can test it.

Thanks.



"GreaterThanTwo Media" <com> wrote in message news:<OpVvsB8#phx.gbl>... 

Extend limited functionality Workflow manager

Posted: 25 Feb 2004 05:41 AM PST

Can you explain further and give us more details why you are trying to do
this?

John O'Donnell
Avanade Inc


"Edwin Jongsma" <nl> wrote in message
news:com... 
changing the status or manually. I would like to know if there is a
possibillity to extend this functionality. In my application I would like to
trigger the workflow manager when an account is modified. 
procedure? 

Server installation strategy, RAID and tuning etc

Posted: 25 Feb 2004 05:20 AM PST

Great!

The two servers is to secure our business to grow in the future.

Thank you for your Reply !!


"John O'Donnell" <com-nospam> wrote in
message news:e#ynBF8#phx.gbl... 
volume 

How to delete (not disable, but DELETE) a user from the user list?

Posted: 25 Feb 2004 05:03 AM PST

That's because the system does not allow you to delete a user. It
would be nice to have this ability for a user that does not own any
data, but for now, you are forced to disable.

You could try to manually delete the appropriate record out of the
SystemUserBase table, but this could cause you problems down the road
that are unforseen (and is not supported). If you try this route,
first remove the license & roles from the user from with MSCRM.

Matt

On Wed, 25 Feb 2004 08:03:43 -0500, "Keith Dorken"
<ca> wrote:

I seem to be unable to figure this out. The help seems to not use the
word
'delete' in conjunction with 'user' and I cannot see a menu item to do
it.

XSL feed-- Metadata -Deployement Mgr

Posted: 25 Feb 2004 01:11 AM PST

thanks mike


"GreaterThanTwo Media" <com> wrote in message
news:eBlsP97#phx.gbl... 
available 
for 

Server Components

Posted: 24 Feb 2004 05:56 PM PST

Based on my experience, the only way to get around this is to create users in the AD of the domain where CRM is installed and force them to login using the DOMAIN\User method. This is how our people connect from afar or when they are on their home machines.

Web eSupport

Posted: 24 Feb 2004 05:04 PM PST

Tom,

We have a possible solution for you. I would like to understand your
needs more fully. Service Portal for Microsoft CRM is one of our add
on products. Please visit our website or contact me directly for more
information.

John
net
www.dynamicmethods.net

PS. Also check out our award-winning PDA solution. Mobile Portal for
Microsoft CRM. Works with Palm, Pocket PC, Smartphone, and Blackberry
devices.




"Tom" <microsoft.com> wrote in message news:<0f2401c3fb3b$4cdc15c0$gbl>... 

Problem Refreshing Contact Form from External .NET App

Posted: 24 Feb 2004 04:27 PM PST

You may need to play with the syntax a little, but it is possible.

Mike


<microsoft.com> wrote in message
news:199701c3fbf8$38133570$gbl... 

Sales for Outlook 1.2 Install

Posted: 24 Feb 2004 02:58 PM PST

Erik,

I just noticed a prior post that I didn't try.... when specifying the
crmIsapi.dll, copy that dll to your C:\ root, regsvr32 it, then map to
c:\crmIsapi.dll and it worked for me!!! Fixed a few problems too!! I wasn't
sure if I needed the SRF mapping in anything other than MSCRMServices, so I
set it for the Microsoft CRM 1.2 Site Properties, and it made the change in
MSCRMServices too....

Hope you get it resolved.

"Jim Scavuzzo" <com> wrote in message
news:u7VpLg7%phx.gbl... 
on 
resolved 
be 
/LV. 
errors. 
Tools 
following 
that 
type 
to 
the 
same 
got 
of 
you 

Loading MS CRM in FRAME / IFRAME

Posted: 24 Feb 2004 07:14 AM PST

Technically, yes I could probably do that, but it wouldn't do much for
solving my problem... I'm trying to get it running in a frame so that
CRM is just one component of a suite of components that can be loaded
into the main frame from my app. My app has a toolbar always on top,
loading original and 3rd party web-based apps into the main frame.
I've gone through all the accessible Javascript and modified it to run
the my frame... unfortunatly, some of the CRM buttons and such are
..NET controls that are already compiled, so I cant change the
Javascript for those. Its too bad, because I was so close to getting
this done. Anybody have the source code to MS CRM? :)

"GreaterThanTwo Media" <com> wrote in message news:<u5n1iuv#phx.gbl>... 
Subscribe to: Posts (Atom)