Pages

Search

"make" command not found - Forums Linux

"make" command not found - Forums Linux

"make" command not found

Posted: 21 Jan 2010 06:33 PM PST

Maybe the path to "make" is wrong, maybe you didn't install "make"
(then you surely also don't have gcc), or maybe the path where "make"
is located needs the root to access it. Try: login as root, then
"whereis make" and see if make can be found.

On Thu, 21 Jan 2010 18:33:01 -0800 (PST), Jed <biz>
wrote:
 

USB cable - why ?

Posted: 19 Jan 2010 03:10 PM PST

On Jan 20, 6:24pm, Shadow <Sh@dow> wrote: 


That sounds very familiar with my experiences today and came to a
conclusion some microsoft update has ed up. It works on a clean
(no updates) computer but with a current and up to date Windows XP -
it doesn't.

Try it on another computer without any updates and get back to me
please.

Automatize pressing of "YES" while doing ssh

Posted: 18 Jan 2010 02:20 AM PST

On Jan 18, 9:09am, Florian Diesch <net> wrote: 

Or use it in the command line, or run a pre-scan to record the
hostkeys.

ssh -o 'StrictHostKeyChecking no' targethost

There are also a stack of small tools for bundling up this sort of
parallel SSH operation, such as "dssh"., which you may find useful.

GRUB MBR changed strangely between CentOS 5.2 and 5.4?

Posted: 17 Jan 2010 04:39 PM PST

On Jan 18, 2:37pm, j3 <com> wrote: 

On further reading (http://mirror.href.com/thestarman/asm/mbr/
GRUB.htm) I see that the bytes in question appear to be the sector
address of the GRUB stage 2 file, which makes sense - change that and
GRUB can't load the next stage, so it fails. Or in my case,
overwrite /dev/sda1 so that the stage 2 file location changes and we
have the same effect.
So the conclusion is that nothinghas changed in the GRUB MBR between
CentOS 5.2 and 5.4. Rather, when GRUB is installed the stage 2 file
sector address is embedded into the MBR and that's the difference that
I observed.

Blogging clients on Debian - Blogilo and b2evolution

Posted: 14 Jan 2010 02:21 PM PST

"Neil Jones" <null> wrote in message
news:mVL3n.7330$iad... 

I just use Wordpress. What does a "blogging client" do that wordpress
doesn't??

CC

Playing .mov files in Fedora Core 9

Posted: 13 Jan 2010 09:37 AM PST

On Jan 13, 12:37pm, Richard Vaughn <com> wrote: 

You cannot go wrong with MPlayer.

Debian, OpenJDK + JavaFX

Posted: 12 Jan 2010 10:28 PM PST

Klaus Zerwes wrote:
 


If I read well linux users had "early bird access"

http://javafx.com/faq/


--
--
What's on Shortwave guide: choose an hour, go!
http://shortwave.tk
700+ Radio Stations on SW http://swstations.tk
300+ languages on SW http://radiolanguages.tk

Extreme stupid question about grub

Posted: 12 Jan 2010 03:55 AM PST

> > On 2010-01-13, Douglas Mayne <localnet> wrote: 

Quite so. All that you've done is to create a bootable environment
that runs no programs (services) that will allow you to use the
machine. Useless.

It sounds like you had a partition that booted and loaded a root file
system (perhaps on the same partition?). You've now created a new
boot partition but it doesn't know where to look for the root file
system. If that's the case maybe all that you need to do is modify
the kernel command (assuming that you're using GRUB as the boot
loader) in /boot/grub/grub.conf or menu.lst to specify where the root
file system is, eg "root=/dev/sda2".

I'm no expert on this, so if my advice is wrong or you hit other
problems try reading http://www.linuxjournal.com/article/4622 or
http://www.gnu.org/software/grub/manual/grub.html#Configuration or
searching the Internet.

Linux friendly Laptops and Netbooks??

Posted: 11 Jan 2010 03:13 PM PST

The Natural Philosopher wrote:
 

Don't let her hear you calling her that... ;)

--
Backpacker

High CPU usages and sometimes hard crashes in my Debian/Linux.

Posted: 11 Jan 2010 12:33 PM PST

> Every problem I have had hardware wise the last three years has been 

I just did that a few weeks ago too. I will try again later.
--
"We are anthill men upon an anthill world." --Ray Bradbury
/\___/\
/ /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site)
| |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net
\ _ / Please remove ANT if replying by e-mail.
( )

Debian installed - Now what?

Posted: 10 Jan 2010 01:16 AM PST

Neil Jones wrote:
 

Why not? I've found Debian to be among the easiest of installs, as
long as the Ethernet port is recognized by the installer (even if one
employs the DVD based install, rather than a netinst version). I
heartily suggest anyone who attempts to install Debian on a machine
with a network card not recognized by the installer temporarily install
a NIC which is recognized by the installer.
 

Well, you could download a .deb file and load it manually into your apt
application (whichever one you use). If it isn't in the repository or
on your hard drive (or network), then no apt application will find it.
You could also obtain the source package and compile from source.
 

If you want to use X, then you should have selected a Desktop install
when you ran the install routine. The default display manager is
Gnome, but I prefer KDE. I find KPackage, the KDE Package manager, to
be very easy to use and very powerful. I find it much more intuitive
than Synaptic. Of course, now that you have Debin already installed,
you can get KDE by simply typing `apt-get install kde`. During
installation, under Advanced Options, one may select KDE as an
alternative to Gnome.

Acer Aspire X1800 linux install error

Posted: 08 Jan 2010 04:07 AM PST

The Natural Philosopher wrote: 



When I used to use Fedora I got the same errors while booting from the
distribution media

Funny enough...I walked away from the machine and heck maybe 15-20
minutes later the bootup finally completed.

I was then able to install Fedora and once it was installed
it booted normally from the HD

Project 200 v 2003 compatibility Microsoft Project

Project 200 v 2003 compatibility Microsoft Project

Project 200 v 2003 compatibility

Posted: 26 Feb 2006 12:39 PM PST

John,
Thanks for your reply.

Certainly is a head scratcher. we can open a Project 2000 file and save it
as a Project 2003 file. That is how we have got arround the problem. Having
made the save it allows us to make changes and update without any issues.

I recall last year having exactly the same problem with a Project 2000 file
that I opened on the clients machine using 2002 making changes and not being
able to save them, consequently loosing all the changes.

Another thought has crossed my mind that I will try. It seems that it
'fails' once and then doesn't happen again, ie it is non reproduceable. The
effect is almost like 'seeding'. Once the 2003 programme has recognised the
2000 file format it then works for all future files built in 2000.

The method we use for updating is standard and is usually achieved through
simply adding a percentage in the % complete field, or using the progress as
scheduled tool, or reschedule tool. My colleague has just come off a three
month overhaul project using Project 2003 without issues, and I simply resort
to using 2000 to avoid the issue. Also once we get over the problem by
opening and saving the original file in 2003, we have no further problems.
This seems to point less at user input issues and more toward some weird
interaction between 2000 and later versions.

Thanks though for your thouhjts any others would be most welcome.

Regards

DavidC

"John" wrote:
 

How can I add a material list to a task

Posted: 26 Feb 2006 09:26 AM PST

Hi Don,

Another option is to use the text fields, one for materials (although
materials can be added under resources), one for location and one for tools.

You can then sort say on Location and run a report of all the tasks, start
times, durations, tools required, resources, and materials for that location.
Using a date field you could also set a date to be x days ahead of the
status date. Then set the report to only show tasks that have not finished
but started or were to start before the date set in the custome field.

Hope this is of help.

regards

DavidC

"Don V" wrote:
 

Resource Assigment Dates Not Matching Task Level Dates

Posted: 26 Feb 2006 08:20 AM PST

> I want both John and Bill's hours spread evenly across the duration,

Ask yourself why???

You are trying to configure Bill's downtime. Just let it go. He can spend 40 hours doing nothing with repect to your project.
That's good!!! he could be doing something else, even a vacation. Why can't you just let him contribute his 60 hrs?





"KGMSP" <microsoft.com> wrote in message news:com... 

Task duration based on calculation

Posted: 26 Feb 2006 02:44 AM PST

Hi Chris,

Welcome to this Microsoft Project newsgroup :)

This sounds like Project's efforte driven settings. If you set up the 20min
duration task, then add another resource, the duration should halve to 10
mins. Do you not observe this effect?

FAQs, companion products and other useful Project information can be seen at
this web address: http://project.mvps.org/faqs.htm

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP

Chris wrote: 

Linking tasks no longer causes dependent tasks to be scheduled

Posted: 25 Feb 2006 08:03 PM PST

Dear Gérard,

Thank you kindly for sharing your expertise. This issue began when we
installed the MS Team Foundation Client, which adds some functionality to
Project. I suspect that somehow this preference was changed, as I am fairly
certain I have never updated that preference myself before.

Your advice regarding the automatic / manual calculation was in fact the
issue. The setting was in manual mode. Placing it in automatic fixed the
issue.

Many thanks,

Barton

"Gérard Ducouret" wrote:
 

How do we create a report that summarizes several Project Plans.

Posted: 25 Feb 2006 11:26 AM PST

Hi ItalianHeart ,

Welcome to this Microsoft Project newsgroup :)

You might like to have a look at my series on Microsoft Project in the
TechTrax ezine, particularly #17 & 18 on Multiple Projects, at this site:
http://tinyurl.com/2xbhc or this:
http://pubs.logicalexpressions.com/Pub0009/LPMFrame.asp?CMD=ArticleSearch&AUTH=23
(Perhaps you'd care to rate the articles before leaving the site, :)
Thanks.)

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP



ItalianHeart wrote: 

Legend Tab is Greyed out

Posted: 25 Feb 2006 06:45 AM PST

You're welcome, Joe, and thanks for the feedback.:) If you have a problem
when connected to your server try posting on the server newsgroup. Please
see FAQ Item: 24. Project Newsgroups. FAQs, companion products and other
useful Project information can be seen at this web address:
http://project.mvps.org/faqs.htm

Mike Glen
Project MVP


Joe wrote: 

Should I consolidate my projects?

Posted: 24 Feb 2006 11:36 PM PST

You're welcome, John.

--
Jan De Messemaeker, Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
For FAQs: http://www.mvps.org/project/faqs.htm
"Cybert" <com> schreef in bericht
news:googlegroups.com... 

How do I insert a blank line between tasks in MS Project?

Posted: 24 Feb 2006 04:55 PM PST

I agree with John on blank rows causing problems. Why don't you replace those
blank rows with summary task? This will keep your projects seperated.

"markinsco@gswater" wrote:
 

Outdenting tasks in MS Project standard

Posted: 24 Feb 2006 02:51 PM PST

In article <com>,
"Faty" <microsoft.com> wrote:
 

Faty,
If you are using Project 2003, I recall there was a problem with
outdenting in some cases. This issue was resolved with the SP-1 update.

However, you use the phrase, "...undo the outdenting..." and that makes
me wonder exactly what do you want. Outdenting all tasks will will put
them all at the same level, namely outline level "1", so I don't
understand you use of the word "undo".

John
Project MVP

Installing Project 2003 over Project 2002?

Posted: 24 Feb 2006 02:10 PM PST

In article <phx.gbl>,
"Pat" <pkelecy at insightbb dot com> wrote:
 

Pat,
It is very easy to transfer custom settings and macros. Simply create a
new file in Project 2002 (it can be a blank file) and use the Organizer
to transfer all your custom items to the file. Then open that file in
Project 2003 and again use the Organizer to transfer the custom items to
the 2003 Global. For back up I recommend periodically saving your Global
file to another partition on your hard drive or better still, to some
type of removable medium. That way, if you have a major disaster, you
can easily re-instate your custom settings.

Unless you have a need to run more than one version, (I do as an MVP so
I can relate to user's posts), then no, there probably is not a
compelling reason to keep both versions installed. Project 2000 through
2003 are all fully compatible, the main difference is that each new
version added more functionality.

John
Project MVP 

How do I revise the start date on a project template?

Posted: 24 Feb 2006 01:18 PM PST

Thank you. I discovered that the problem was the Percent Complete field
showed a number, so it was preventing the previous dates from clearing out.
My solution was to select the whole project, go to Task Info (Shift+F2), and
then, on the General tab, change the % Done field to 0. That solved it!

"Catfish Hunter" wrote:
 

footer problem

Posted: 24 Feb 2006 07:48 AM PST

Thanks for the reply. Ith is an option but not a very elegant one! It seems
strange that the other office (xp 2002 SP3) applications use the mapped drive
letter but project is using the unc path. I'll keep looking for the moment.

Cheers now

"Catfish Hunter" wrote:
 

Share Resources Dialog Box

Posted: 24 Feb 2006 06:46 AM PST

No, they were not. Once I did what you asked it worked fine.

Thanks!

"roadkill" wrote:
 

Printing Bar Text

Posted: 24 Feb 2006 03:50 AM PST

In article <com>,
"Peter J" <microsoft.com> wrote:
 

Peter,
OK, now it sounds like there may be an issue with your print driver. Can
you try it on a different printer (i.e. that uses a different driver)?
If not, you might want to check for updates on the driver you are using.

John
Project MVP 

EditSite Tool

Posted: 24 Feb 2006 02:05 AM PST

I know I tried posting there but for some reason my post wouldn't 'stick' -
anybody got an answer apart from 'wrong messageboard' ?

"Jan De Messemaeker" wrote:
 

Project 12 : cannot log on

Posted: 23 Feb 2006 10:06 PM PST

Madhur:

Please do not cross post.

Please also consider that you are discussing a product in very early beta,
and that you may be violating your company's NDA with Microsoft in doing so.
Your posting here is at least a few months premature.

--


Gary L. Chefetz, MVP
"We wrote the books on Project Server"
http://www.msprojectexperts.com

For Project Server FAQs visit
http://www.projectserverexperts.com

For Project FAQs visit
http://www.mvps.org/project


"madhur" <com> wrote in message
news:googlegroups.com... 

See original critical path

Posted: 23 Feb 2006 08:50 PM PST

You can create a view that only has baseline start and finish bars. Format
the bars in this view as if they were regular task and critical task are red.
Hope this helps.

"KW" wrote:
 

How to create a report with a matrix of resources and their calend

Posted: 23 Feb 2006 02:05 PM PST

Hi Michael,

I guessed that my response was not going to be exactly what you wanted :-).
Thanks for the feedback and maybe there will be more options in the next
release for exporting resource's calendar data.

Julie
"Michael Carroll" <microsoft.com> wrote in
message news:com... 

Costing mixed 5 day week and 7 day week resources in a task

Posted: 23 Feb 2006 01:40 PM PST

Steve,
thanks for the feedback.
I was hoping that there was a way to do it just in MS project, automatically
allowing for calendar changes, holidays etc when the timeline changes. The
actual scenario is part of a much larger project and there have been a
number of plan restructures to meet the clients changing needs. I was
trying to avoid having to rework all the accommodation, equipment hire tasks
each time the staffing, plan, holidays and schedule changed.

I will do some experiments with linking as you suggest

Regards


Gav


"Steve House [Project MVP]" <send.hotmail.com> wrote
in message news:phx.gbl... 

Predesessor link not working

Posted: 23 Feb 2006 01:15 PM PST

Hello Jan,

Thanks for the help. The successort START Dates were not moving as per the
links due to the fact that successor tasks had some actual % complete. I had
the % complete hidden so I was not able to see that. When I wiped of the
actual % complete, the successor tasks honored the links.

Thanks,
Nirakar

"Jan De Messemaeker" wrote:
 

Microsoft Word - Horizontal line and other questions

Microsoft Word - Horizontal line and other questions

Horizontal line and other questions

Posted: 15 Mar 2015 11:58 AM PDT

1. At the top of every page in the Endnotes (but not on other pages) there is a horizontal line that cannot be selected or deleted. I would like to remove them. I see nothing under Page Layout or Options.

2. I would like the bottom margin to be smaller to waste less blank space, but when I try to change it with Page Layout > Margins, nothing happens. The document has several dozen footnotes but no footer.

2. I have Gutter set to 0.3", alternating left and right. In a few cases where I have a simple table occupying parts of two consecutive pages, the part on the second page is offset horizontally relative to the text on that page.  I can fix this by putting a small character (not in the table) before the second part. Is there a better way? (Most such tables are positioned correctly on both pages.)

Gratefully as always,

Steve

PDF to word conversion w/ signature problem

Posted: 15 Mar 2015 11:11 AM PDT

When I scan in my signed time log the PDF coverts  the text and signature  with windings: I have tried to save the file as doc, docx, rtf...

What am I doing wrong?

Word: How to change orientation of page numbers to portrait when the page is in landscape

Posted: 15 Mar 2015 10:41 AM PDT

Hello wise Word gurus! You were so kind in helping me a few weeks ago, that I will impose on you again.

I have a Word document where some of the pages are in Portrait and others are in Landscape. I am attaching an example document in OneDrive: https://onedrive.live.com/?cid=4FBE64FD6D227DC0&id=4FBE64FD6D227DC0%21118

The page numbers are aligned to the top right of each page, no matter what its orientation. Since this document will be bound, I would like the page numbers of the landscaped pages to move so that they are still "top right" in the bound document, even though the text in those pages is still landscaped.

Any ideas? I'm sure it can be done, because I've seen dissertations that had this layout. I just can't figure out how to make it happen.

I am using Office 2013 on a PC.

Many thanks!

Dean

How can I create a field that changes the value of references when I change the value of the field?

Posted: 15 Mar 2015 09:22 AM PDT

How can I create a field that changes the value of references when I change the value of the field?

Lets say I have a H1 in my document that says Assignment [#] where [#] is a changeable number.

Now i my footer I have Assignment [#], Page [PageNum] of [PageCount]

How can I make both assignment numbers store the same value regardless of which one I change?

Office 2013 Your AutoCorrect file, \MSO2057.acl, could not be saved.

Posted: 15 Mar 2015 09:14 AM PDT

I am getting error when I open a word or excel file.

"Your AutoCorrect file, \MSO2057.acl, could not be saved. The file may be read-only, or you may not have permission to modify the file." I tried to follow the earlier answer to this type of error for Office 2007

File --> Options-->Proofing-->AutoCorrect Options.

Here I see only these tabs "Auto Correct, Math Autocorrect, AutoFormat As you type, AutoFormat and Action"

Please help.

Fillable form with a calculating field without protection

Posted: 15 Mar 2015 03:43 AM PDT

I am a novice and have read quite abit about fillable forms but cannot find what I am looking for if it exist.

I am creating a fillable form with 7 plain contents controls in one line then repeated down the page. I think I have read that I cannot use calculate if the document is not protected. I have only one contents control that I would like a calculation to happen.

My users need to be able to copy the whole line and paste into a forum page. If I protect the form copying the whole line doesn't seem possible. Is there anyway around this.

I wanted to have whatever range of numbers are imput into one field and then divided by 18 and the answer in the other content control box. Does this make sense. I can send you a copy of the line set up with content controls with an explanation of what I would need.

Word password problem

Posted: 14 Mar 2015 03:09 PM PDT

I created a Word document on my laptop with a password to open it.  When I attempted to open the document on my iPad Word app I was told the password was too long.  It would not open on the iPad.  Any suggestions?  

new mailbox cannot receive messages from the internet - Microsoft Exchange

new mailbox cannot receive messages from the internet - Microsoft Exchange

new mailbox cannot receive messages from the internet

Posted: 15 Jan 2009 11:02 AM PST

When I create a new mailbox for a new or existing user, the mailbox
cannot receive messages from the internet (tried gmail, yahoomail).

Error message: 554 554 <(newmailboxaddress)>: Recipient address
rejected: Access
denied (state 14).

Internal email works fine. Can send to external addresses.

Is there something I need to do to enable the ability to receive
external email?

Offline database defrag

Posted: 14 Jan 2009 10:54 AM PST

It looks like you're missing some quotes there.

eseutil /d "f:\Storage Group 2 - fs\Mailbox Database 2" /t g:\temp_mailbox

This assumes that what's inside the quotes "f:\Storage Group 2 - fs\Mailbox
Database 2" is a valid path. I don't believe it is because there's no .edb
on it.
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

"Mike W" <microsoft.com> wrote in message
news:com... 

Undeliverable Meeting Requests

Posted: 14 Jan 2009 07:18 AM PST

Yes Erik is a legit user and is an internal user.

"Martin Blackstone [MVP]" wrote:
 

distributing incoming emails

Posted: 14 Jan 2009 02:08 AM PST

Thanks Lanwench :-)

I couldn't find a free one. Was going to suggest looking at CRM4 for the
Sales side of things.

Oliver

Write DACL inherit - How to remove

Posted: 13 Jan 2009 11:27 AM PST

We have only one domain so that clarified it. I was also not using the
Exchange Management Shell.
I received the following message after running the command:


Remove-ADPermission : Cannot remove ACE on object "DC=sagrescorp,DC=local" for
account "SAGRESNET\Exchange Servers" because it is not present.
At line:1 char:20
+ Remove-ADPermission <<<< "dc=sagrescorp,dc=local" -user
"sagrescorp.local\Ex
change Servers" -AccessRights WriteDACL -InheritedObjectType Group

Best Practices yzer still shows the old server on the list of servers
under "First Administrative Group" but it did not have the Write DACL Inherit
issue listed any more.



"Michael Dragone" wrote:
 

Outlook prompting for credentials after DC removed from Exchange S

Posted: 13 Jan 2009 05:58 AM PST

On Tue, 13 Jan 2009 09:41:09 -0500, Andy David {MVP}
<com> wrote:
 


Oh and BTW, the credential prompting is probably related to:
http://support.microsoft.com/kb/927612

But that doesnt change the fact that running DCPROMO is not supported
on an Exchange Server. I still recommend calling support to ensure
things get fixed up correctly on that server.

Applying local holiday file on a user mailbox or resource.

Posted: 12 Jan 2009 11:49 PM PST

I suppose you could use Invoke-Item to run Outlook with the proper
switches...

"outlook.exe /hol <path>\outlook.hol"

John

"Anders Jensen" <com> wrote in message
news:phx.gbl... 

Backing up an Exchange 2007 VM (VMware)

Posted: 12 Jan 2009 02:06 PM PST

Good Morning Martin

Yes, we have a SAN.

Sounds like I'm on the right track, I just wanted to see what others were
doing.

Cheers

Greg


"Martin Blackstone [MVP]" wrote:
 

Appointments Lost

Posted: 12 Jan 2009 10:20 AM PST

I wish this were true, but I have verified that the user is indeed sending
the appointment and it is not showing up on calendar. This is very
disturbing because people are missing meetings.

Any other thoughts or suggestions?

"Ed Crowley [MVP]" wrote:
 

Exchange Databse Recovery

Posted: 11 Jan 2009 09:27 AM PST

Once you repair the hardware, you may want to reconsider your storage. In
addition to a write penalty that's just plain too high, RAID 5 sets have
issues with rebuild. It used to be that you had a lot of small 9GBish disks
(the last of the breed that actually physically mapped 64 sectors per track)
in a RAID 5 set of say 8 or so members, and if one failed rebulding 9GB of
data wasn't too tough on the remaining drives. These days, people go out
and buy 3 1TB SATA disks a slap then in a RAID 5 set thinking it will solve
all their problems; it won't.

When a drive fails, and is rebuilt on a hot spare, you have to reconstruct
the data on the new drive from the data and parity stripes residing on the
surviving drives. Now all tree drives are going to be increadibly busy
reading the 2TB of surviving data and writing 1TB to the new drive. It's
not uncomon for second drive to fail on rebuild. It doesn't matter if it
was a hard error or a transient soft error on the second drive failure;
you're toast.

Add to the failure/rebuild woes the same old performance issues with RAID 5
when used for random small block workloads with a low read/write ratio.
Once you figure in the write penalty, a mirror will outperform a 4 drive
RAID 5 set. It gets worse when you ran out and bout those big slow SATA
drives because, well, the're slow; a third or a quarter of the IOPS for
random small block workloads that you would get from SCSI. SAS actually
performs a lot better. If I had a choice between SAS and SATA, I'd go for
SAS every time.

So what are those big slow SATA drives, and RAID 5 for that matter, good
for? Workloads that tend to be more sequential (full stroke) and are read
more often than they are written. UC Santa Cruz did a study on user home
directories in an Engineering company environment. Seems on average, 95% or
so of files written to a home directory was only read twice and one of those
times was almost immediately after it was written (user check to make sure
it's ther or Office application autosave behaviour - take your pick). Big
sequential files, rarely accessed, and read more than they are written. Now
there's a use for those 1TB SATA drives. I'd still go RAID 6 though to
address the second failure on rebuild issue.

John


"Miguel" <microsoft.com> wrote in message
news:com... 

I need to relay messages

Posted: 09 Jan 2009 03:46 PM PST

127.0.0.1 is the loopback address of any network card and therefore the
equivalent of the IP address of the server it is in, there would be no need
to allow this address to relay because messages generated by the server will
automatically be allowed..
James.
--
James Yeomans, BSc, MCSE
Ask me directly at: http://www.justaskjames.co.uk


"Javier" wrote:
 

How To Determine Which Exch03 SP2 Post SP Hotfixes are Installed

Posted: 08 Jan 2009 05:24 AM PST

You will be safe skipping the italicized lines. They do not apply to you.
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

"Scott" <microsoft.com> wrote in message
news:com... 

OWA attachment issue

Posted: 07 Jan 2009 06:23 PM PST

This has been resolved. Thanks for the reply

"Lee Derbyshire [MVP]" wrote:
 

the message with restricted permissions cannot be viewed

Posted: 02 Jan 2009 12:54 PM PST

Hi Ed,

No they are not. The sender can resend the email and the reicipeint
receives it then.

Thanks,

Mark

"Ed Crowley [MVP]" wrote:
 

Multi-site Exchange CCR

Posted: 01 Jan 2009 05:57 PM PST


"Elissa" <com> wrote in message
news:%phx.gbl... 

One method is to use WNLB which is fully supported both for the CAS and HT
role. I've written a couple of articles on this subject. You cna find them
here:

http://www.mchange.org/articles_tutorials/exchange-server-2007/planning-architecture/load-balancing-exchange-2007-sp1-hub-transport-servers-windows-network-load-balancing-technology-part1.html

http://www.mchange.org/articles_tutorials/exchange-server-2007/high-availability-recovery/load-balancing-exchange-2007-client-access-servers-windows-network-technology-part1.html

You can use WNLB since the E2K7 servers in both datacenters will belong to
the same AD site (requirement in a Geo-CCR scenario).

--
Henrik Walther
Exchange MVP | MCM: Exchange 2007
Mchange.org | Exchange-faq.dk

Microsoft Word - Word 2013 restarts when I close it

Microsoft Word - Word 2013 restarts when I close it

Word 2013 restarts when I close it

Posted: 14 Mar 2015 12:17 PM PDT

My Word 2013 (all updates on Win 8.1) has suddenly started giving a message "Microsoft Word is trying to recover your information" when I close it. Sometimes it even reopens by itself

I tried a repair - no change.

I then completely uninstalled and reinstalled Office 2013 and it is still doing it.

It does it when Word is in Safe Mode as well.

I have disabled all addins and in the Trust Center I have stopped any apps from opening. Excel and PowerPoint don't do it.

HELP - it's driving me mad.

How do you close the thesaurus/dictionary window after using the shortcut for Thesaurus (Shift F7)?

Posted: 14 Mar 2015 12:14 PM PDT

Hi, apart from having to move the cursor over to the top right side of the screen and clicking the close button (which takes a lot of time), is there a quick way to close the thesaurus/dictionary window after having opened it for a word using shift-F7?

Thanks

Manuel

deleting unwanted figure labels

Posted: 14 Mar 2015 10:40 AM PDT

Somehow I managed to have about 400 figure labels in my document. I really only have 20 figures. What I think happened was that one label was a number and it accepted this as the label number and so it tagged a huge amount of figures labels to this document. 

This will be a burden when I merge this chapter with the other chapters and then try to print out a table of contents. How do I get rid of these labels, is there something in insert caption that will allow me to delete unwanted labels?

Another question how do merge chapters so that I only have one list of references using endnote

Word 2013 saves all docs as Word 2007...just started doing this yesterday!

Posted: 14 Mar 2015 08:23 AM PDT

Graduate student here, freaking out!  I am working on several research papers.  All were saved as Word 2013 .docx files.  Yesterday, I went to open one, and it came up in 'read only' 'compatibility mode'.  Upon looking, every single word doc saved on this laptop have been converted back to a 2007 version, even though this machine has never had Word 2007 on it. 

If I open a new document, save it to my Desktop or anywhere, it shows it's a 2007 Word doc.  This means all my embedded graphs and charts are now completely messed up!  What gives?

Next of kin. Need Product key

Posted: 14 Mar 2015 08:01 AM PDT

Hello,

 I have to reboot my computer and I need my product key for Microsoft office  student and home. My mother bought it for me and passed away. I do not have any of her information that was needed when I called Microsoft technical support. Can you help me to locate my product key so I can get my laptop fixed and microsoft office back up and working. Thank you. 

Lost part of Document

Posted: 14 Mar 2015 02:49 AM PDT

I'm posting this to help out my girlfriend.

She has been busy with school work and been working on a document for quite some time now.

Today she turned on her Acer laptop with Windows 8.1 and opened the document to finish off her work to find that part of the document has been deleted. 
A whole list of references has been deleted from the bottom of one of the questions she had to answer. 

I have tried and tried to find and older version of it or a back up of it but I can't find it anywhere.

Please help :)

Word 2010 "VBA" for this Question please

Posted: 13 Mar 2015 04:19 PM PDT

Hello From Steved

I have nine columns of numbers up to 24 numbers

If I highlight the range In the column that I require then use the find dialog box

I then use the "Findin drop down box" Select the "Current Selection" and use the Search "Down"

I choose a number that I want to be found for example number 3 then I goto "Current Selection" highlite it

it then finds all the occurrences.

My question please what is the VBA for "Current Selection" Thank you

a sample is below

     5      1      2      1      1      2      1      1      2   

     2      2      6      2      2      1      2      5      5    

     1      6      5      5      6      5      6      2      1   

     6      4      4      6      5      6      3      6      6    

     4      5      3      4      3      3      5      4      4   

     3      3      1      3      4      4      4      3      3    

 

How to add a custom water mark to a Word 2013 document with different sections on only a few pages.

Posted: 13 Mar 2015 04:00 PM PDT

Hi All,

I have a Word 2013 document, which has multiple section breaks. I need to add a custom watermark on about 10 pages out of 80. Can you please offer some assistance?

thank you in advance, 

Jo
Subscribe to: Posts (Atom)