Pages

Search

Microsoft Word - Word 2013 List layers and font formating

Microsoft Word - Word 2013 List layers and font formating

Word 2013 List layers and font formating

Posted: 22 Mar 2015 03:37 PM PDT

I want to create a list where every lines content has a different font from the other lines. Whenever I go into the Modify Style dialogue for a style that I have created, I can easily change the font of a number on said list. However, this does not seem to change the actual line content of that level. For example, I can specify that the first level of my list to have Futura Light and the second level Helvetica Neue Thin (as shown in the picture). Whenever I type content into the list, the fonts won't match the actual font of the numbering on the list.

Is there someway where I can match the list content (i.e. what I type) with the font formatting of the numbering of the list? In other words I want to say: all type on level one should be Futura Light 16 pt, all type on level two Helvetica Neue Thin 12 pt.. and etc.

Word 2010 won't save files (Check the Temp environment variable)

Posted: 22 Mar 2015 02:01 PM PDT

When I open Word 2010, it gives me the message "Word could not create work file. Check the Temp environment variable" (in my local language). Effectively this means I cannot save any files. It won't give an error message about saving but it won't save either. The only way to close a file is to choose don't save. Upon closing the program, it also claims that changes have been made to the Normal template even when I haven't made any.

I've found various solutions online. I've already done the most obvious fix Microsoft recommends for this problem which is to check that the setting in Internet Explorer is correctly pointing to the Temporary Internet files folder. I've checked the registry for what it says under Cache, that information is correct. Another solution suggested to check the registry entry for AppData, but that was correct too.

I've also tried the Microsoft FixIt file for resetting user options and registry settings in Word, that did not help. I've tried repairing the install, no use. I uninstalled the entire Microsoft Office package and and then reinstalled it, but the problem is still there.

I have spent about ten hours on trying to solve this problem today, on a day when I had planned to work instead (I need Word for work). Any ideas for what I can do, short of purchasing a new computer?

product key

Posted: 22 Mar 2015 01:37 PM PDT

I just bought office for my home so i can have microsoft word, and do not have a product key. How do I get one?

Word 2013 will not work

Posted: 22 Mar 2015 10:38 AM PDT

When I open Word 2013 on my computer it says it cannot verify the license of the product, and it says to fix it in control panel.  When I go to control panel, and I click run programs for previous versions of Windows.  Then I click  that I am having problems with Word 2013.  Then, a few options come up, and I say the program requires additional permissions.  It does not work.  Help???

Problem with Word 2010 following updates

Posted: 22 Mar 2015 09:56 AM PDT

A problem with Word 2010 occurred after the latest Windows updates, which included revisions to Word. It will operate normally for awhile, but then will go into a mode where opening a document file (.docx) will result in another winword.exe process starting. I get one for each document that I open. When a document is closed, the following message appears:

"This file is in use by another application or user. (C:\Users.....\Normal.dotm)"

This is followed by a prompt to save the Normal.dotm file.

The winword.exe processes continue to run after Word is exited and the prompts are closed.

I renamed the Normal.dotm file and restarted Word. A new Normal.dotm file was created, but the problem didn't go away.

I tried the System file checker tool and it did not find any integrity violations.

Ending the winword.exe processes and restarting the computer results in normal operation—for awhile.

Is this a Windows problem or a Word problem and is it related to the updates?

How to exactly position text in Microsoft Word?

Posted: 22 Mar 2015 05:53 AM PDT

I am writing my undergraduate thesis and the format for manuscript requires me to position a certain string of characters 5 inches from the edge of the paper. How do I do that? I tried using the vertical ruler but I don't know how. 

Recover selected text from Word document

Posted: 22 Mar 2015 05:20 AM PDT

Hi, so basically im using word 2013. I typed out a really important paragraph for a school project but I accidentally deleted it. Then I accidentally saved the file so I cannot retrieve that paragraph that I had typed earlier. Does anybody know how to retrieve selected text? Thank you.

Why is the “Change Picture” button missing / disabled in Word 2013?

Posted: 22 Mar 2015 04:07 AM PDT

I'm working on a Word 2013 document containing mailing labels. (Well, actually I'm creating badges for a conference - but I'm using the mailing labels mail merge functionality for that.)

I created a picture and placed in in the background of the mailing label cell. Now I'd like to replace it with another picture without changing formatting settings, size or position. However, - as you can see on the following screenshot - the Change Picture button is missing from the Adjust ("Anpassen" in German) ribbon group on the very left.

I therefore created a custom ribbon group that I called "Bild ändern" ("Change Picture" in English) and added the Change Picture button to that group. (Also visible on the screenshot.)

When selecting my picture, the Change Picture button stays disabled. My question is: Why? And how can I enable it? (Or which other way can I replace it?)

Note: This is a copy of my question on Superuser. The first (but unfortunately wrong) answer pointed me towards this forum where I hope to find other answers.

Paste special - destination format - does not work in Word 2013

Posted: 21 Mar 2015 10:49 PM PDT

I have Word templates that I have created to match online forms that contain tables as well as text.  In the past, I have been able to copy and paste the online forms into my Word templates using "Match Destination Format" (paste special) with no problem because they look the same.  I was running Windows XP with Word 2007.  Now, I have upgraded to Windows 7 with Word 2013, and the "Match Destination Format" is no longer available.  I have read that the "Keep Text Only" option has become the new "Match Destination Format", but it simply does not work.  The tables disappear and the format is messed up.  Is there a setting somewhere that I need to activate/deactivate somewhere to get this to work right?  Any input would be greatly appreciated.  Thank you in advance.

What is the best Ribbon editor these days?

Posted: 21 Mar 2015 08:50 PM PDT

What is a good editor for the Ribbon for Excel/Word/PPT 2007-2010?

It's been a few years since I had to customize the Ribbon in an addin via a Ribbon editor. (I don't even have one any longer, and will have to DL one.) Back when I used them, I noticed some definitely better than others. Don't want to go through that again. 

What is a popular editor these days? What do you use? 

Thanks.

Eljay

Word 2013 Table - Sum

Posted: 21 Mar 2015 05:10 PM PDT

Hello their!

Hope somebody can help me with this problem I got. My english not so good so have pictures also


This is working good, no problem yet. B2 (1000) + B3 (200) is make the "Totalkostnad för 2" = 1200. All okey :)

But maybe you allready se my problem, can word tables handle my split cells for this simple thing I want? Ok continue.


In the cell that is left side "100" and right side "200" the "totalkostnad för 2"= 350. I can count so I know it is wrong :P
How shall I do this if I like to had that work for real? Why is it in picture nr 1 corrected with B2 and B3 and then B4 and B5 mess up?

Here is also the same isue. But my biggest isue, cause this is what I really like to do but please help me with how to do on pic 2 also. Here I have "1550" and "420". Togheter the give me a "low price" trip so the "totalkostnad för 2" = 0. And again ofcourse thats wrong. I want to have it count it right.

Can somebody help me? And when this work, I want to do the same but with the "higj price" trip. "1750" + "450" =.... And atm it is "1750", "450". When I add more things, like hotell, airplane and so on I want the "totalkostnad för 2" to count it. I know that in older word you had oush F9, but that is not the problem here. But do I still need push f9, when/if somebody solve this for me?
The split cells really fck things up for me, and cant find how to do when use them. Only found solutsions on easy thing like picture 1 that is working for me.

Thank you if you can help me

Task Completion Dates in Past with 0% Complete Microsoft Project

Task Completion Dates in Past with 0% Complete Microsoft Project

Task Completion Dates in Past with 0% Complete

Posted: 06 Mar 2006 05:05 PM PST

Mike Thanks a ton.
Exactly what I was looking for.

"Mike Glen" wrote:
 

How do I add go/no-go decision points to my Gantt chart?

Posted: 06 Mar 2006 11:09 AM PST

I recommend you use the Format dialog along with Flags and user date
fields to display the go-no-go tasks

Glen

Automatically record actual overtime

Posted: 06 Mar 2006 09:53 AM PST

Project can do it, but only in custom fields. Let's say you do 4 hours on
one task in a day and 6 on another. Which task should be charged the
overtime, one or both or none? There are way too many variables and other
scenarios where Project running on a computer with an IQ of zero could never
get the Overtime correct.

You could have a blanket VBA macro that went through every day for a
nominated resource and set to overtime all hours >8. That would of course
reduce durations and then you get another round of difficulties!!

--

Rod Gill
Project MVP
Visit www.msproject-systems.com for Project Companion Tools and more


"Mel" <net> wrote in message
news:googlegroups.com... 

sp2a server upgrade - issues

Posted: 06 Mar 2006 08:47 AM PST

Hi ScottC55 ,

Try posting on the server newsgroup. Please see FAQ Item: 24. Project
Newsgroups. FAQs, companion products and other useful Project information
can be seen at this web address: http://project.mvps.org/faqs.htm

Mike Glen
Project MVP


ScottC55 wrote: 

Progress Summary of Milestone tasks

Posted: 06 Mar 2006 08:39 AM PST

Continuing with the previous posting by Jon... Since milestones represent a
culmination of a series of activities, we never place all the milestones
together in a summary task.

Instead, we use other tasks (Significant Accomplishments, Accomplishment
Criteria, etc.) which culminate in a Program Event Milestone. As the
previous post implies, loading work into these other actvities and taking
credit for them incrementally will provide you a roll-up into a summary.

I am guessing that you may have all your program milestones loaded into one
summary task and therefore allowing a brief report to management. Consider
other methods of reporting (you can always filter on Miletones) which allow
actually measurable work to drive the %complete on the summary level task.

Although I haven't directly answered your question, perhaps I've given you
an alternative way to present the data that will give you what you seek.

Jim

"John" wrote:
 

MS Project 98 to 2000 to 2003

Posted: 06 Mar 2006 07:30 AM PST

Thank You very much Rod for the quick reply.

A few things:
 
DONE and OK.
 
SHOULD I CREATE THE NEW RESOURCE POOL USING MSP 2000 or 2003?

Regards,

"Rod Gill" wrote:
 

Can I create a critical path flowchart in Projects 2003?

Posted: 06 Mar 2006 07:11 AM PST

In article <com>,
Garold <com> wrote:
 

Garold,
In the scheduling world a flowchart is referred to as a network diagram
and yes, Project can create graphical representations other than a Gantt
chart. Take a look at the views: Descriptive Network Diagram, Network
Diagram and Relationship Diagram. Each offers a slightly different "cut"
of the data and they can be customized, although Project does not have
as much flexibility with its graphics as some other applications (e.g.
Visio) or add-ons to Project (e.g. Milestones).

Hope this helps.
John
Project MVP

Defining a Critical Path

Posted: 06 Mar 2006 03:09 AM PST

Adding to Mike's comment - there is a specific technical definition of the
term "critical path" in the project management world and MS Project
calculates it based on that definition. The critical path is the sequence
of tasks that determines the overall project duration. You can trace many
other pathways through the project, basing them on any criteria that you
might choose, but only the sequence of tasks with slack times of zero or
less can legitimately be called the critical path. You can choose to call
oranges "mini-basketballs" if you want to but no one else will understand
what you're talking about if you do. <grin>
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



"Twinkletoes1971" <microsoft.com> wrote in
message news:com... 

how to calaculate an early start S-curve and late finish S-curve

Posted: 05 Mar 2006 11:16 PM PST


Steve House [Project MVP] wrote: 

I'd think there'd be 2 slightly different S-curves based on ES and LS,
but not on F dates. And unless there was a lot of total slack on a
significant number of tasks, they'd be pretty much the same. The LS
curve would be slightly to the right of the ES curve. Shouldn't be much
difference in shape at all. They'd both aculate the same costs. I
can't imagine where this would be of much use. Does the OP have an
example of where this would be useful?

How do you screen shot an image ?

Posted: 05 Mar 2006 03:46 PM PST

Hi Deb,

Welcome to this Microsoft Project newsgroup :-)

Please see FAQ Item: 16. Project Viewer.

FAQs, companion products and other useful Project information can be seen at
this web address:http://project.mvps.org/faqs.htm

Hope this helps - please let us know how you get on :-)

Mike Glen
Project MVP

deb wrote: 

Sample files

Posted: 05 Mar 2006 12:35 PM PST

Thanks, I have sent you an email

Regards

"Mike Glen" <glenATmvps.org> wrote in message
news:phx.gbl... 

How can I activate horizontal scroll bars in Gantt view?

Posted: 05 Mar 2006 09:55 AM PST

That didn't help, Steve. I also tried toggling the maximize button, turning
the program on and off, and Detect and Repair. Any other suggestions?

"Steve House [Project MVP]" wrote:
 

Project stays checked out from server

Posted: 04 Mar 2006 07:13 PM PST

Spunky --

In the future, please post your Project Server questions in the
microsoft.pubic.project.server newsgroup, as this newsgroup is devoted to
the Microsoft Project desktop application only. To answer your question, no
one will be able to give you an absolute answer why a project gets "stuck"
in checked out state. We recommend that you click File - Close instead of
clicking the Close button (X button) in the upper right corner of the
window, as this seems to reduce the number of times that projects get stuck.
Also, if you are using Project Server 2003, please stop asking your Project
Server administrator to check in the stuck project for you. Do it yourself
on the Project Center page, where you will find the "Check in my projects"
link near the bottom of the sidepane. Hope this helps.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We wrote the book on Project Server"


"Spunky" <microsoft.com> wrote in message
news:com... 

Project Documentation

Posted: 04 Mar 2006 11:57 AM PST

LuisGM --

In the future, please post your Project Server questions in the
microsoft.public.project.server newsgroup, as this newsgroup is devoted to
the Microsoft Project desktop application only. To answer your question,
refer to the following FAQ:

http://www.projectserverexperts.com/Shared%20Doents/PS2003Doentation.htm

Hope this helps.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We wrote the book on Project Server"


"LuisGM" <com> wrote in message
news:googlegroups.com... 

task bar is not appearing

Posted: 04 Mar 2006 08:28 AM PST

In article <com>,
blank flange <blank microsoft.com> wrote:
 

Blank flange,
It sounds like you have a Windows issue. This newsgroup is dedicated to
issues with MS Project, a planning and scheduling application. I suggest
you post in a newsgroup that deals with Windows.

John
Project MVP

Compare Project Versions Utility

Posted: 04 Mar 2006 07:55 AM PST

In article <googlegroups.com>,
"Cole" <com> wrote:
 

Cole,
You don't necessarily have a lemon but even if you do, let's just shown
them and make some lemonade.

The fact that the creator of the file hid some columns is just what I
suspected. I thought I explained how to see for sure what fields are in
a view, (although not necessarily displayed), but I guess not so let me
try again.

1. Activate the view you are using for the compare (e.g. Gantt Chart
view).
2. Go to View/Table/More Tables
3. In the More Tables window, you will see the active view table
highlighted. Hit "Edit"
4. In the Table Definition window that pops up review all the fields
that are shown. If a field was hidden in the view by pulling over the
vertical column separator the column width will show a "0", however that
field is still "active" and will be tested when the compare utility runs.
5. Simply "Delete Row" of any fields you do NOT want as part of the view
6. Finally, hit "OK", then "Apply" and run the compare again.

Hope this helps.
John
Project MVP

Risk Management

Posted: 03 Mar 2006 01:10 PM PST

On the "Companion Products" site, the Web site for SCRAM Software is no
longer active. SCRAM 2006 is ready, though, and sells for $399. It adds
Monte Carlo simulation, trend ysis, cost risk ysis, allows you to
incorporate contingency plans into your project (decision logic), and
identifies all the paths through the network, from most-critical to
least-critical. Contact me at net to purchase a copy.
Thanks,
Rick Williams


"Program Support" <Program microsoft.com> wrote in
message news:com... 

Resource and task usage views

Posted: 03 Mar 2006 12:14 PM PST

Hi Paul,

Sorry for the delay in replying. Okay, go ahead and send the zipped file to
me at:

Passport 6847 at maine dot rr dot com

Remove the space and replace the at with an @ and the dot with a period.

I'll take a look as soon as I can and post suggestions back to the
newsgroup.

Julie
"Paul" <ufl.edu.(donotspam)> wrote in message
news:com... 

Export Maps - Editing a custom Map

Posted: 03 Mar 2006 11:58 AM PST

In article <com>,
Jeff N. <microsoft.com> wrote:
 

Jeff,
You're welcome. The answers are actually in the Project Help file under
"Export map".

John 

master project resource sharing

Posted: 03 Mar 2006 09:50 AM PST

Hi,

The master project should be using the resource pool as well. consolidating
and inserting are the same thing.

--

Rod Gill
Project MVP
Visit www.msproject-systems.com for Project Companion Tools and more


"YLE" <microsoft.com> wrote in message
news:com... 

Help with Master Project Summary

Posted: 03 Mar 2006 09:24 AM PST

You're welcome, jandawn67 :-)

Mike Glen
MS Project MVP


jandawn67 wrote: 

When a MPP File Inserted into another File, the Project Summary Changes

Posted: 03 Mar 2006 07:57 AM PST

In article <phx.gbl>,
Rob Schneider <com> wrote:
 

Rob,
Well to be honest I don't know what the heck is going on. When I try to
te my test (I'm using 2003 Pro) I do not get the same result. Now
the master Project Summary Task starts on the Current Date before I hit
"calculate", even though I set the master's Project Start Date to 5/3/06
and have the options set to start everything on the project start date.

I seems we are both going in circles - hey, maybe it some kind of
circular relationship....... ;-)

The only other suggestions I have are: Try rebuilding the problem file
using the suggestions in FAQ 43 on our MVP website. You might also want
to try running Detect and Repair if you haven't already.

John
Project MVP

Updating to Status date and reschedule uncompleted work to start a

Posted: 03 Mar 2006 07:07 AM PST

Hi Alan,

You're very unlikely to get Microsoft's attention here as they hardly ever
respond. If you want to make a point, why not "Suggest New Content" on this
site: http://office.microsoft.com/en-us/FX010857951033.aspx

Mike Glen
MS Project MVP

Alone wrote: 

Project isn't showing project data; just a white pane. Any ideas

Posted: 03 Mar 2006 06:13 AM PST

Julie, thanks for getting back with me again. I've been able to open the
Project files on my home computer, running the same version of Project.
Others at work have been able to open the files I have not been able to open.

I've done the "detect and repair" action. I've uninstalled Project and
reinstalled it. So far, no joy. Still get the blank while screen, though
the header shows the file is open and Project asks me if I want to save
changes, so it appears to be opening the file, it just won't show any of the
data in the file on the laptop.

I don't know of any new software that has been installed since I last opened
a Project file successfully. I keep the system updated with Windows and
Office updates; those are all that I know that have gone on to the system
recently.

Thanks!

mtk

"JulieS" wrote:
 

Microsoft Word - person can't find Office 2007 key? It was working, now it isn't

Microsoft Word - person can't find Office 2007 key? It was working, now it isn't

person can't find Office 2007 key? It was working, now it isn't

Posted: 21 Mar 2015 03:03 PM PDT

Hello,

Trying to help someone they were doing a  word document and went back to it. They have had this computer for quite a while and has Office 2007.

Upon opening the document, it started asking for the key. They have used this for quite a while and had bought it from Best Buy.  I was thinking though

it would be doubtful that it would be in the registry, and if searched maybe I could find it? The other thing I was thinking of was to restore it to an earlier

date though I am not sure that would help?

They are elderly and don't remember having a disc with it, and they took it to Best Buy which couldn't help them out

Any suggestions?

Page numbering when starting a new section break

Posted: 21 Mar 2015 01:22 PM PDT

Hi everyone:

I am working on a book where I have a one-page Introduction that starts at roman numeral, iii, and then the Foreword which I want to start at roman numeral iv. 

There is a blank page between these two sections, which I need in there, and it appears that I've sectioned this area properly. Section 1 (odd) is a blank page, Section 2 is the Introduction page (even), and Section 3 (odd) is the Foreword page. The roman numeral have to be this way; otherwise, the Index page numbers in the back of the book will be off.

Here's the problem. When I try and change to roman numeral iv on the Foreword page using "Format Page number, then "Start at", it puts in the right roman numeral, turns the roman numeral to iv on the Introduction page, and it adds another page, which throws my whole document off. Now it shows the Introduction as odd, then the Foreword as odd. My "link to previous" if off.

Why is it doing this, and there still seems to be a link, even though I've shut the link button off.

Any advice?

Thanks much!

Mel

Font change

Posted: 21 Mar 2015 09:11 AM PDT

Numerous pages of normal-font text in several of my Word files have transformed themselves into what look like wingdings-font text and I don't know how to transform the symbols back into the original normal font. Suggestions would be helpful. Thanks.

Compile Error Message

Posted: 21 Mar 2015 09:05 AM PDT

When I open MS Word I see an Error Message 'Compile Error in hidden module: AZ Wizard Module'.  This is my second attempt to remove it.  All of the

posted answers seem to be out of date.  In Word Startup>Options>Add-Ins I see 'AVWiz14s.dotm listed as a template, but I cannot remove it. I recently installed Avery's Program to get a template in Word and my problem began.  I have uninstalled Avery, but it did not help.  How can I remove that Compile Error Message from my computer?

How to detect what version of Word is running using VBA

Posted: 21 Mar 2015 07:00 AM PDT

Dear all

I am experiencing persistent crashes when I use the Selection.Range.Relocate wdRelocateDown (or wdRelocateUp) method in Word 2013.  I have read on another forum that this is an acknowledged problem and that whilst the wdRelocateDown (and Up) methods work beautifully in Word 2010 and 2003, the Application.Run "OutlineMoveDown" (or Up) method is needed in the 2013 version of Word.

Now, the template that holds my macros could be opened in either Word 2013, 2010 or 2003.  Therefore I need the code snippet that will tell me what version of Word is opening the template.  Knowing the version I can then construct the macros to run the appropriate method as described above.  I'm sure the method of detecting what version of Word is running using VBA is awfully simple but I haven't been able to track it down, hence my appeal to the wisdom of the Community.  Thanks in anticipation of your assistance again.

Kindest regards

Peter

How to Bold specific parts of text document automatically.

Posted: 21 Mar 2015 03:16 AM PDT

Hello,

I have a document that has time codes spread throughout the text. The only thing common between them is the format that is [hh:mm:ss]. The hh, mm and ss values are variable.

I need all these time codes to be bold formatted.

Replace function does a great job in formatting the same text throughout the sheet, but I can't find any function that allows me to do that for formats or masks. Like if I could somehow program it to embolden everywhere [ ] occurs and everything in between.

Was hoping if someone could help me out with it.

Thanks,
Yasir

Font default issue - 21/3/15

Posted: 21 Mar 2015 12:14 AM PDT

When using "MS Word" document, in the menu bar above, the letter font and

 font size always shows "Calibri" and size "11" as default. I want the default to be"Times New Roman" and font size "12" as default. I changed it many times but it still reverts back to "Calibri" with "11" whenever I open up MS Word document. How to resolve this.********

I'm suddenly unable to print Word 2003 documents

Posted: 20 Mar 2015 07:42 PM PDT

word 2003 still works well for me. but suddenly I can't print out word documents. instead I get a small symbol of an open book at the bottom of the page with an X on the right hand page. the printer works fine. I can print all kinds of stuff off the internet. but suddenly not word documents. any ideas on how to fix this?

How can I make Word 2013 open by default in Draft view?

Posted: 20 Mar 2015 07:08 PM PDT

Currently, Word opens in Print view. I prefer to work in Draft view.

 I asked this question in another forum and was told to go to advanced options and check "Allow opening a document in draft view,"  and to then save the document.  

I did this. However, it did not work.   Documents still open in Print view.

Can I make it so that whenever I open a Word 2013 document, it opens in Draft view? 

Office 2013 caption for figures has same numbering

Posted: 20 Mar 2015 04:03 PM PDT

I am writing my thesis in microsoft word 2013. I have assigned "Heading 4" to the chapter number, "Heading 2" to the Section and "Heading 3" to the subsection.

I have three figures under the three separate subsections in a chapter. I have inserted a caption for each figure. I have enabled the "Include chapter number" tick box and pointed the chapter number to "Heading 4". All the figure captions are labelled "figure 1.1" instead of having the labels "figure 1.1", "figure 1.2" and "figure 1.3." What could be the possible reason for this?

I have noticed that if all the figures are under the same subsection and then I insert the captions I get the labels "figure 1.1", "figure 1.2" and "figure 1.3.". But when they are in different subsections, they have the same label i.e. "figure 1.1".

Adding Independent vertical & horizontal lines to a page (not connectors)

Posted: 20 Mar 2015 04:02 PM PDT

Oh my gosh, Is it really that difficult? All I am trying to do is add additional arrows to this flow chart. Every time I do that it moves the other arrows off the page. I don't think I want to use a connector I have no need to do that. All I want are independent arrows that I can place. I do not understand the layout options, positions functions. I have tried using every option there is, alignment, absolute, lock anchor.  Can someone please give me detailed instructions. I have looked for instructions and I am just not getting it. I also used the freeform shape for my lines, but there seems to be some connectivity to it. I just want independent rectangles, arrows that I can place where I want them. Please help and I am glad it is Friday!!!

Thank you,

T

If there is a You Tube video I'd b happy to watch, but I have not found my answer....

Microsoft CRM - Error 401 Access Denied

Microsoft CRM - Error 401 Access Denied

Error 401 Access Denied

Posted: 01 Nov 2005 09:58 AM PST

Matt,
It was indeed that "anonymous access" had been disallowed. That fixed the
problem. thank you!
Dave

"Matt Parks" wrote:
 

CRM Readiness tour advice please

Posted: 31 Oct 2005 05:11 PM PST

Hi John,

Thanks for the advice,

I think I'll attend, but not spend the extra money taking my marketing
person. See you there?

Gavin

"John O'Donnell" <com-nospam> wrote in
message news:%phx.gbl... 

Other options rather than a required primary nvarchar for custom e

Posted: 31 Oct 2005 02:10 PM PST

Specific questions related to CRM v3 should be addressed to the Early Access
newsgroup. For connection details see:

https://microsoft.order-7.com/CRMPartnerBeta/resources/newsgroups.doc

Note that the server name should be privatenews.microsoft.com.

But, that column can be flagged as non-required.

--

Matt Parks
MVP - Microsoft CRM


"Lee" <microsoft.com> wrote in message
news:com...
Thsi is in relaltion to the many to many question. We created a entity that
contained the two entities we wanted. But now we are forced to have a
nvarchar name column for that entity. We don't want that. We want to just
have the auto generated GUID. It will not allow us to remove the name from
the form or from the entity.

"Matt Parks" wrote:
 
other 
composite 

Contract Date Issue

Posted: 31 Oct 2005 12:08 PM PST

On Tue, 1 Nov 2005 12:01:20 -0500, "Tim Powers"
<com> wrote:
 

I know, this is often the root cause of many problems with contract
dates

I have an SQL script that runs daily to get the timezone for any new
users that get created


Julian Sharp
Vigence for MS CRM in the UK
See my MSCRM blog http://spaces.msn.com/members/mscrm

many-to-many relationship

Posted: 31 Oct 2005 08:01 AM PST

> "Jane" <com> wrote in message 
 

"Matt Parks" <com> schrieb im Newsbeitrag
news:phx.gbl...
 

Jane,

Please understand that this is not only a simple workaround. An additional
entity makes sense because you almost ever need additional data.

This entity could have a name like "Registration" or "Participation" with
additional properties like registrationdate, studentprice or state.

Regards,
Jürgen

--
Jürgen Beck
Dipl. Kfm./Wirtschaftsinformatik
MVP für Microsoft CRM (Second Competence: Visual C# .NET)
MCSD.NET, MCDBA, MCSE, MCT
Microsoft Business Solutions Certified Master - Microsoft CRM Developer
http://www.Juergen-Beck.de
http://www.Microsoft-CRM-Support

Making CRM available over the web via SSL

Posted: 31 Oct 2005 06:56 AM PST

as a director he is probably insisting that he needs to see the latest data
and not data that is 24 hours out of date.

As matt says getting this working with SSL is possible but you may hit
reporting issues.

good luck and let us know how you get on.

"Cozy" <cozy@groups> wrote in message
news:phx.gbl... 

Usage of CRM 3.0

Posted: 30 Oct 2005 09:44 PM PST

Thank you Ronald...downloading now...let's play a little bit with it

--


Alejo Leguizamo
SQL Server MVP
Colombia
www.solidqualitylearning.com

___________________________________
"Ronald Lemmen" <RonaldL@-REMOVETHIS-avanade.com> wrote in message
news:com... 

Installation error for CRM 3 on SBS 2003

Posted: 30 Oct 2005 12:59 PM PST

Specific questions related to CRM v3 should be addressed to the Early Access
newsgroup. For connectin details see:

https://microsoft.order-7.com/CRMPartnerBeta/resources/newsgroups.doc

Note that the servere name should be privatenews.microsoft.com.

--

Matt Parks
MVP - Microsoft CRM


"Jürgen Müller" <de> wrote in message
news:phx.gbl...
Hi, Marge.

I have the same problem and behaviour.
I've tried another installation on Windows Server 2003 and
this works fine. Now, I'm testing with this installation....

Regards

Jürgen

"Marge" <microsoft.com> schrieb im Newsbeitrag
news:com... 

Queue Delievery Issue

Posted: 28 Oct 2005 06:13 PM PDT

Matt,

I do not see the mailbox as disabled. I have cycled the server and the
account is disabled and does have the attributes set that you mentioned. Is
there another way to disable the mailbox?

"Matt Parks" wrote:
 

WorkFlow Manager - Notification by e-mail not work

Posted: 28 Oct 2005 02:57 PM PDT

There have been some people who have had succes in doing this with a manual
workflow that is fired recursively. Not sure I like that approach. Another
option would be a post-callout.

--

Matt Parks
MVP - Microsoft CRM


"Augusto Montilla" <microsoft.com> wrote in
message news:com...
Thanks for your answer.

Your solution works correctly only if the case ("statuscode") updates a
single time.

In order to make this task ("Send notification by e-mail") several times
it´s possible to use the event to "Check Conditions"

For example, send e-mail notification when it changes the "statuscode" of
the case or when an activity (task, fax, email, call) is created.

Thanks

"microsoft.public.crm" wrote:
 
condition" 
works 

CRM v3 bate & SBA 2006

Posted: 28 Oct 2005 09:05 AM PDT

"MikeMc" <net> schrieb im Newsbeitrag
news:phx.gbl...
 

Mike,

Such integration should be possible because Small Business Accounting uses a
SQL Server (MSDE) instance named MICROSOFTSMLBIZ.

A good developer should create a simple integration between SBA and CRM in 3
days.

Regards,
Jürgen

--
Jürgen Beck
Dipl. Kfm./Wirtschaftsinformatik
MVP für Microsoft CRM (Second Competence: Visual C# .NET)
MCSD.NET, MCDBA, MCSE, MCT
Microsoft Business Solutions Certified Master - Microsoft CRM Developer
http://www.Juergen-Beck.de
http://www.Microsoft-CRM-Support

Private newsgroups for MSCRM v3.0!

Posted: 28 Oct 2005 08:03 AM PDT

Hi Ronald!

Ronald Lemmen wrote: 

The NNTP-Servername in this doent is wrong: it should be

privatenews.microsoft.com

Cheers

Arne Janning

3.0 Installation Permission Errors

Posted: 28 Oct 2005 05:45 AM PDT

No -

It's a straight ahead test environ: native AD domain with DC, exchange,
SQL05 and CRM servers all on the same domain. The website is on the CRM
server.

"Arne Janning" wrote:
 

CRM 1.2 and 3 on the same server

Posted: 28 Oct 2005 03:49 AM PDT

As far as I know, this won't work on the same CRM App server. While you can
select the isntal directories, both versions share the same Registry
location and some common keys (like the database location). installing both
would end up with both pointing to the same database.

--

Matt Parks
MVP - Microsoft CRM


"Arne Janning" <com> wrote in message
news:%phx.gbl...
Hi Tomas!

TomasFloyd wrote: 

From Shawn Nulph[MSFT]:

Even though this has not been tested installing CRM v1.2 and 3.0 should work
without any problems. Just be sure that you create a new CRM OU for the V3.0
installation. Then when installing CRM make sure to specify this new OU as
the location to create the CRM AD objects within.

You should also be able to install CRM v3.0 to the same SQL instance as v1.2
is installed to. The only thing you would need to do is to make sure that
the organization name you specify in the CRM V3.0 install is different than
your existing CRM v1.2 installation. Then the database names will not be the
same. V3.0 organization name is not tied to the license key so this value
can now be whatever you want.

The only thing that would not work would be to have the CRM v1.2 and v3.0
Exchange Router on the same Exchange Server. You would need to have 2
separate Exchange Servers in order to resolve any conflicts.

Cheers

Arne Janning

SBS 2003 deployment v 3.0

Posted: 27 Oct 2005 02:36 PM PDT

Thank you both for that.

"Jürgen Beck" wrote:
 

CRM Deployment Manager and Database restore

Posted: 27 Oct 2005 12:15 PM PDT

MBS support have procedures to rebuild the crystal database and republish
the standard reports
"Matt Parks" <com> wrote in message
news:phx.gbl... 

General Question

Posted: 27 Oct 2005 10:37 AM PDT

See doentation and demos on

http://www.microsoft.com/BusinessSolutions/crm/product/microsoft_crm_product_information.mspx

or read the http://microsoftcrm3.blogspot.com


--
Microsoft CRM Expert - CRM & .Net

All about Microsoft CRM 3.0- read

http://microsoftcrm3.blogspot.com




"John O'Donnell" wrote:
 

Importing Product Lists

Posted: 27 Oct 2005 09:38 AM PDT

If you're entering products for the purpose of quotes and orders, you
may want to check out our certified add-ons for Microsoft CRM which
provides much greater control over products, pricing, quotes & orders.
See www.experlogix.com or contact me.
Thanks.

Jeff Holway
805-504-9729 x707

CRM 1.2 shows "Service Unavailable" when trying to open applicatio

Posted: 27 Oct 2005 09:11 AM PDT

Thanks Tim!

"TMiller" wrote:
 

Price List and Porducts howto

Posted: 27 Oct 2005 09:05 AM PDT

Hello Mike,

Thanks for this answer but it doesn't cover my request, what if in your
solution when the public price of product changes? I need to review all my
price lists and change it everywhere it appears with all the risks for
errors.
I was expecting a more sophisticated solution from ms.

Christian

"Mike Christl" <microsoft.com> a écrit dans le message de
news: phx.gbl... 

MSCRMService SOAP Server Application Faulted

Posted: 27 Oct 2005 07:44 AM PDT

Matt,

Yep it is intergrated. Sql server complains of (null) logon.

I have given up with this issue and will now be performing a
re-install.

I have looked through dozens of related posts, nothing seems to help.

Thanks anyway!

Sales for Outlook MSDE

Posted: 27 Oct 2005 02:53 AM PDT

Thanks Steve, this has worked.

One other quick question, I have set the services to auto start however when
the pc is re-started the services are not startin for msde, and they are set
to automatic. Anything I could be missing?

Thanks, Tony.

"Stephen Redmond" wrote:
 

Can't connect from single PC

Posted: 26 Oct 2005 10:39 PM PDT

Thanks Dan,
However, I did a diff on the present web.config and the one in the last
backup and found out that someone had added an authorization element setting
<deny users="?">. Not sure why this was done, but once I removed it, things
worked fine.

I don't know why this modification would cause this behaviour, especially
from just my machine, as we're not allowing anonymous access anyhow.


"Jon Swoveland" wrote:
 

Exchange-CRM email Router Install Problem

Posted: 26 Oct 2005 02:11 PM PDT

Thanks, Dan. This got me pointed in the right direction. Turns out there's
a registry setting
<HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\SecurePipeServers\winreg>
that was preventing the connection. Adding the path allowed the connection.
For more info - MSKB Article ID : 329229
Best wishes,
Michael Bearden

"Dan Quinton" wrote:
 

Lead source values

Posted: 26 Oct 2005 12:41 PM PDT

Perfect - thank you very much.

"Matt Parks" wrote:
 
Subscribe to: Posts (Atom)