Pages

Search

Microsoft Word - WORD 2013 MACROS DISSAPEAR

Microsoft Word - WORD 2013 MACROS DISSAPEAR

WORD 2013 MACROS DISSAPEAR

Posted: 15 Aug 2014 01:38 PM PDT

I work on Word 2013 (Windows 7). Every time I rec ord a macro it works well until I close Word. When I reopen it, all recorded macros have dissapeared. I have tried changing the Normal.dotm file name, reconfiguring the Complements, etc. and nothing seems to work. Please help.

Cannot open RTF file, Word 2007

Posted: 15 Aug 2014 01:24 PM PDT

I have some files on a disc that I cannot open, scans put onto Word and saved as RTF. Error: "there is not enough memory or disc space to complete the operation." I was there when the files were created about 5 years ago. This computer has 165 G free space. What is the possible explanation and is there any way around it?

MS Office 2013 uninstall incorrect xps to pdf converter addin

Posted: 15 Aug 2014 12:02 PM PDT

 I had had an outside vendor for pdf files that quit working after a windows update so I was trying to work around using an  xps  or oxps file then converting to pdf, .

I downloaded Microsoft add in for xps converter to pdf download file=(confirmation.aspx?id=7) thinking that the office 07 version might work since 2013 didn't have one.

It is very peculiar because I can copy an xps or oxps extension to one note and it will read it, but word says it is unknown.

1. I can't figure out why my pdf suite quit working and is now shown as incompatible and

2. I don't know how to uninstall the add in

In the past if I have attempted to download an incorrect version the software would notify me so I wasn't careful enough. I can't find the place to uninstall the add-in and don't know what to do except sit here and feel foolish.

spell check

Posted: 15 Aug 2014 11:42 AM PDT

I use windows 2003. Recently I was writing in a document originally written in Spanish. I was writing in English. When I tried to spell check it said I had to DL a program. Afterwards It checked in Spanish. I tried to change it back to U.S. English. But  the spell checker kept going back to spanish.

Can you help me?

I wish to print page numbers only on a previously created document.

Posted: 15 Aug 2014 09:50 AM PDT

I have a previously printed document which I wish to reinsert in the printer and print page numbers only on it.

Does anyone know how to do this?

I'm using Word 2007.

Thanks.

Word goes blank during editing

Posted: 15 Aug 2014 09:30 AM PDT

I have a user who will open a Word document, be happily typing away, and suddenly it just goes blank.  Word is still up but the body of the document goes white.  This has happened with multiple documents and to different users on different PCs.  At first we thought we had a resource issue; so we put them into brand new PCs running Windows 7.  The problem just resurfaced after two months and on a totally different document.  Of course, this is a completely fresh installation as well.

Any thoughts?

Adjusting alignment of subscripts and superscripts

Posted: 15 Aug 2014 09:30 AM PDT

Is there a way to adjust where the subscripts and superscripts appear? Specifically, I'd like to "nudge" my subscripts down a little farther below the letter they're attached to. (I know how to do this in MathType but am hoping to just be able to type a few things in without going to MathType.)

Thanks!

Just Saying Thanks! :)

Posted: 15 Aug 2014 08:18 AM PDT

Hello,

This is my first actual post here, but I have been using this community for quite some time now.

Just wanted to say thanks to all of the contributors and moderators who take time out of their busy day to answer all of our questions.

This has been extremely valuable to me and I have learned so much.

So thank you! I for one appreciate all of your help and assistance!

Best Regards,

Benjamin Celinski

word 2013 navigation headings missing

Posted: 15 Aug 2014 08:04 AM PDT

Hi,all, I have a word doc generated on Word 2007, which has headings for every section. But when I opened it in Word 2013, I found that some headings are missing/skipped as seen in the navigation panel. So I am wondering how to fix it? How to bring back those headings so I can navigate the content properly?

cheers

custom heading styles do not show as headers in "place in this document" for hyperlinks

Posted: 15 Aug 2014 05:51 AM PDT

I've created custom heading styles. I try to create hyperlinks to text that have these styles but they do not show as Headings in "places to link to" in the "Edit Hyperlink" box.

Changing a numerical MailMerge field to an Ordinal number (NOT using date formatting)

Posted: 15 Aug 2014 05:30 AM PDT

Hi,

We have some mail merge documents that are being created automatically, and one of the MailMerge fields is an ordinary number such as 5, 42, 99, 12.. etc.

What we want is for the final document to display the number as an ordinal: 5th, 42nd, 99th, 12th.. etc

I have found many many guides about how to change a date field into an ordinal with the \Ordinal directive, but this field is just being passed as a mailmerge value so it looks like this in the mailmerge document before it is used to create a printed document:

<<number>> 

It is not a date field.

We don't really get to see the document and amend it before it goes to the printer, so I assume having an embedded macro or something would not work.

Is what I want to achieve even possible?  I've spent several hours trying different ways of doing this

Many thanks in advance.

MS WORDS 10 not opening!!!

Posted: 15 Aug 2014 05:25 AM PDT

I used MS word 10 for a month or two & now its not opening when i continue to hit the click its just says 'WINDOWS CANNOT ACCESS THE SPECIFIED DEVICE,PATH OR FILE.YOU MAY NOT HAVE THE APPROPRIATE PERMISSIONS TO ACCESS THE ITEM'

but i was using it till now,

and for every word doc. it shows the same message 

pllease help

pc and mac not compatible? How to change a cross symbol to a tick symbol on a legacy check box

Posted: 15 Aug 2014 05:20 AM PDT

Hi, I created a protected form with all the whistles, I'd mixed all types of controls, command buttons to hide unhide,  and added macros, VBA to clear, save to PDF, etc.... It worked brilliantly on my PC and other PCs, Unfortunately this must also work on Macs. 

On a mac, nothing works apart from legacy tools and when I tried to create the same doc on Mac, well, "argh" is the word. 

At this point anyone who knows how to get my macro word file to work on Mac is my hero. 

If not, I have redone the form with legacy tools only, but I really do not like the check box cross. is there a way to change the symbol to a tick? I have come across previous post saying there wasn't but I secretly hope that someone came across a new solutions since the last posts.

Thank you

Microsoft Word Starter 2010 - Microsoft Office Starter (English) - temporary copy available on not saving - what does it mean?

Posted: 15 Aug 2014 05:02 AM PDT

I have a Microsoft Office Starter 2010 that came preinstalled with my OS on device. Whenever I use it and do not save a file, I see this dialog box. What exactly it means? Where can I see the temporary saved copy? Where does it gets stored?

 I tried clicking the learn more which took me to the online help site of microsoft office, but I didnot get any thing useful that could answer my queries. This could be a very helpful tool if by mistake we click don't save instead of save for the document.

All the help will be apprectiated. Thanks.

Word 2013 - maintain compatibility

Posted: 15 Aug 2014 03:57 AM PDT

I have just bought a new laptop running windows 8.1 64 bit and installed Office professional Plus 2013. When I go to Save as, I am not given the opportunity to "Maintain compatibility" (there is no check box). When I click on "Tools" in the Save as dialogue, I only see Map network drive and not the general options (which include passwords for modify and edit.

I have the same version on my desktop (also running win 8.1 64 bit) and these options show there. They also show in Excel 2013 on the same laptop.

I have uninstalled and reinstalled already.

Also if I go to the Options screen and go to advanced, there are no compatibility options  listed at the bottom.

Can anyone help? I desperately need the option to save a file as read-only on the laptop.

Pam 

Alert icon for my e-mail on Word and Excel documents

Posted: 14 Aug 2014 10:31 PM PDT

I just noticed an "alert" icon (yellow triangle) on the top right of my Word and Excel documents.  There is also one of those head silhouette icons (since I don't use a photo for my profile).  When I hover over this, it says that I am signed in to my e-mail account.  There is also a drop down menu when I click on an arrow..  The drop down says "Account Error.  Sorry, we can't get to your account right now.  To fix this, please sign in again."  There is a "sign in" to click on, but when I click on it, a small blank window opens up with one of those horizontal lines like when the computer is showing something loading or showing the progress of something.  The window closes and nothing happens.  The drop down also has my name, my Outlook e-address and options:  "about me, change photo, account settings, switch account".  If I click on "account settings", the new page is "User Information" and under that is says "Account Error.  there are problems with your account.  To fix them, please sign in again.  But I don't know where I'm supposed to sign in. There is also a small box to click on "Fix me".  When I click on that, the same blank window with the "progress" line opens, then closes and nothing else happens.  Also listed:  my name, Outlook e-address, "change photo", "about me", "sign out", "switch account", a choice for "Office background" and "Office theme", Connected Services (OneDrive-Personal with my e-address).  I have no idea why the icons appear on my Word documents and I don't know how to get rid of them.  I also don't know what might be happening to my e-mail account because of this.  Anyone else have this problem?  Anyone have any suggestions of what I can do?

Microsoft Word crashes repeatedly on Surface 2

Posted: 14 Aug 2014 09:18 PM PDT

Hi all,

I have been having a problem where Microsoft Word crashes repeatedly (every few minutes) while typing up a document. It is not the preview version and I could not find a similar question.

This has been very frustrating as I am a student and bought the surface 2 for mainly this purpose! Any help would be greatly appreciated!

Word form field problem

Posted: 14 Aug 2014 07:51 PM PDT

I have a form field set up in Word 2010. the form is protected for filling in forms. When I tick one of my check boxes called 'Contract Signed', it seems to disable the text fields above, which previously allowed me to enter text. (I inherited this form from someone else). 

I have looked at the form field properties and pressed Alt F9 to see if there is a hidden macro or something which is causing this but can't seem to figure it out. Can anyone help?

Thanks, Anita

Template Background Color

Posted: 14 Aug 2014 07:31 PM PDT

Trying to create a template with a background color. So far the whole template has gone well except the background color.

Each time I try an create a new document with the template I have created, the background color does not come through.

I have used, fill effects, custom page color, each and everytime this does not work.

Is there anyway to create a template and have a background color come through on when the template is used?

This is putting back my assessment day after day. If anyone can help please and thankyou.

micro soft word

Posted: 14 Aug 2014 07:24 PM PDT

in word, receiving a screen titled WINDOWS SECURITY and titled CONNECTING TO OFFICE.MICROSOFT.COM.  it is asking me to sign in with my password but it does not recongnize my password(s)

I havce a solid line that replaced a dotted line I was typing for a sum of a column of numbers- I can't get rid of it

Posted: 14 Aug 2014 07:01 PM PDT

I have a solid line that replaced a dotted line I was typing to inset a sum for a column of numbers- it appears when you hit enter to move to the next line to insert the sum - if you don't hit backspace to remove it  becomes a permanent fixture to your work- it won't allow you to by pass it and can't be removed by backspace ??????? 

Open document in Word 2007 after Word is closed.

Posted: 14 Aug 2014 06:33 PM PDT

I have a couple of problems that I suspect are related.  First of all, I do a lot of file and folder management with macro programming in Word 2007; however, from time to time when I run a macro that involves moving folders, I get an error message that states that a process cannot be performed because a file is still open in Word when, in fact, there is no file open.  I can re-open that file and close it, but the macro still does not work.  I have to close Word, restart it, and the process will continue.  In some cases, I have tried to do the process manually by shutting down Word and attempting to move a folder with Windows Explorer.  However, I get a Windows error stating that the file is still in use, even though Word is completely shut down.  In that case, I have to reboot the computer, and even then I get a message that Windows is trying to shut down but that Word still has an open file (even though Word is not open) and asks if I want to save changes to the file.  If I reboot and re-run the macro, it goes through just fine.  It doesn't happen all the time, but just enough to be irritating.  Any ideas as to why this may be happening?

List Templates (used by bullets and numbering) limits?

Posted: 14 Aug 2014 04:50 PM PDT

I upgraded from Office 97 to 2007 last year.  I have been supporting document authors and am about to train a new batch of them.  Word 97 had a known List Template limit.  Use of ad hoc bullets and numbering instead of using style could result in a corrupt document.  According to mvps.org, the limit was 200.  There is a Microsoft knowledge base page that shows resource limits but List Templates is not included:

http://support.microsoft.com/kb/211489/en-us

I checked one document today.  I found that the text used only 3 or 4 bullet styles.  It contain no bulleted or numbered paragraph that were not from those styles.  However, the file contained 82 List Templates (exported using VBA).  Creating a new document with no content and attaching my custom template resulted in 15 List Templates.  I added content to the blank document and applied all 14 bullet and numbering styles.  Exporting the List Templates again resulted in only 15.

Is there a List Template limit still exist in Word 2007?  If so, what is it?

Can't repair Word 2013..

Posted: 14 Aug 2014 04:20 PM PDT

HP Desktop Pavilion/Win 8.1/Office 2013.

Yesterday I tried a 'Quick Repair' on Word to fix a problem with text formatting options that are either greyed out or don't work. Today I tried again, intending to do an 'Online Repair' via Control Panel/Programs & Features/ Change. Nothing happens. The option box for 'quick' or 'online' doesn't appear. It's been a very frustrating day with no work accomplished. Is MS ever going to give us a fix-it for Office/Word 2013? Any help would be much appreciated.

how to get office on main desktop not just online

Posted: 14 Aug 2014 04:01 PM PDT

i have a new laptop with new office student and home, i downloaded the program and i can easily access it online by signing in and having it go on cloud, but i cant figure out how to have it on my computer not just online through cloud, i want to be able to click office from my desktop screen and have it pop up. i cant find it on my computer anywhere as i am new to windows 8. is office student and home only for online? please help!!

paragraph style's Space-before parameter is ignored

Posted: 14 Aug 2014 03:20 PM PDT

I have a style "List Bullet 2" for which the Space-Before is set to 6 points.  Yet some of my paragraphs don't seem to respect this.  I don't see any indication that the parameter has been overridden with a local paragraph setting.  This is the kind of thing that drives people to LaTeX.  What could possibly cause this?

Afternote:  This really should come as no surprise.  I'm stuck here late in the evening, other priorites gone by the wayside, trapped because Word 2010 (Nth generation) decides to trip me up into a face slam into the ground.  What kind of Word processor flaunts with impunity something as simple as paragraph spacing?  I mean, it's not as if there aren't decades of examples of products that respect the basic functionality of a word processor.  How did we get into this situation where corporations force people to use a product that *so* *doesn't* work.  Not all the time, justwhen you don't have the slack to deal with it.

Scrolling to the next Find result places it at the top of the screen instead of in the centre

Posted: 14 Aug 2014 03:18 PM PDT

When using Ctrl+PgDn to scroll to the next Find result, the found text (highlighted) is stupidly placed by Word at the *top* of the screen, which means that, should you need to check the context for (what's before and after) each search result, you always need to scroll a bit up every single time.

Is there a workaround so that when you go the next search result, the highlighted occurence of the text is placed in the *centre* of the screen isntead?

Thanks!

File Transfer - Microsoft Office forums

File Transfer - Microsoft Office forums

File Transfer

Posted: 27 Mar 2007 03:58 PM PDT

My system came with Works. I'd be willing to try to help you. You may
contact me at jl dot paules at gmail dot com.

--

JoAnn Paules
Microsoft MVP - Publisher

How to ask a question
http://support.microsoft.com/kb/555375



"Auntie" <microsoft.com> wrote in message
news:com... 

HELP me unistall Trial Office Professional 2007

Posted: 27 Mar 2007 03:30 PM PDT

Bummer...if you are running at least Windows XP, a quick fix might be to use
System Restore to set it back to a time when the uninstaller worked.

Good luck.

Tim


"Cottonwoodian" wrote:
 

Which one should I install?

Posted: 26 Mar 2007 11:45 AM PDT

DL / JoAnn -

Thanks - I got rid of the trial version and installed the one I
bought. Everything is working fine.



On Mon, 26 Mar 2007 16:23:00 -0400, "JoAnn Paules"
<com> wrote:
 

Office 2007 Activation Trouble

Posted: 25 Mar 2007 03:21 AM PDT

IIRC you can only convert retail trials to retail versions and not to volume
license ones, you may need to reinstall Office.
Retail versions don't take volume keys.

hth
g
"Tibelian" <com> wrote in message
news:phx.gbl... 

Error 1719 when using Word 2007 as Outlook XP editor

Posted: 24 Mar 2007 02:40 PM PDT

To add;
OL requires the same version of Word as its editor

<JB> wrote in message news:com... 
XP for editing. I still haven't been able to get Word 2007 to work with
Outlook XP. 

Problem installing Office 97 Professional SR2b patch in Vista

Posted: 24 Mar 2007 02:01 PM PDT

I can understand the desire to not spend money and invest the time to
upgrade however eventually they comes a point when software is no longer
functional on new a new OS. Since Office 97 was released, Windows 98, 98SE,
ME, and XP were released. The fact that it continued to work on 4 (combining
98 and 98SE) different operating systems is something that you should be
quite happy about. But now it's time to make a change. Your office software
is over 10 years old and you are doing yourself and your employees a
disservice.

I know you didn't want to hear this but I also know that you suspect this
much already.

--

JoAnn Paules
Microsoft MVP - Publisher

How to ask a question
http://support.microsoft.com/kb/555375



"Don" <com> wrote in message
news:googlegroups.com... 

office 2002 and 2003 prof

Posted: 24 Mar 2007 01:22 PM PDT

Hello,

If you are running Windows XP, you can regain a lot of disk space if you
delete files/folders leftover from installing the various (and numerous)
Windows updates (assuming you have installed them along the way). These
files/folders, in general, are needed only if you want to uninstall them. But
if you have been using the PC for a while and it's working fine, there isn't
much need to keep those files/folders hanging around taking up valuable disk
space. I have seen several free utilities on the net that will find these
files/folders and delete them for you if you're not able to do it manually.
You could regain multiple megs of space.

Tim


"DL" wrote:
 

How to enable this task bar in MS Office Word 2003 ?

Posted: 23 Mar 2007 06:05 PM PDT

How about an answer to your question now? ;-)

Just go to Tools-Options, click on the View tab and clear/check the "Status
Bar" box.

Tim


"bildos" wrote:
 

registration of brand new computer (Gateway w/ Microsoft Vista)

Posted: 23 Mar 2007 04:38 PM PDT

Milly,
Thank you for your post. I'll try to see if I see any other sticker on the
laptop. Otherwise, I will contact Gateway and/or Microsoft. Microsoft
already responded with several ideas/links and telephone numbers for me to
call.
As to the Outlook, I figured it out. My smtp address was wrong. I didn't
have the right address for my ISP. Thanks again for your post and everyone's
patience with me. I am not very technologically savvy. T.x.!
Oscar.

"Milly Staples [MVP - Outlook]" wrote:
 

Failure to install Office 2007 trial

Posted: 23 Mar 2007 01:07 PM PDT

Since removing the File Conversion 2007 (Beta?) program - I have succeeded
in installing 2007

Thanks for your help.

David


"Aristobulus" <com> wrote in message
news:individual.net... 

office 2007 proplus setup fails on server2003 x64 w/TS/exchange200

Posted: 23 Mar 2007 09:10 AM PDT

Geez...does anyone know of anything that might keep this from installing? Is
there a switch I can run with MSI that might tell me more?? Can anyone make
sense of that log???

Could the fact that I installed Exchange 2007 without first running
prepareAD have anything to do with it? BTW...why would exchange install run
without doing this on it's own??? It's like NT here with no exchange tabs in
AD. I figured exchange would prepare the schema itself...2003 did, didn't it?

Anywho..please help.

TIA

"richard@1itsource" wrote:
 

Microsoft Word - Printing 2 sheets per page on ledger - only prints 1/4 scale - and on top left corner of page and middle top 1/4 scale.

Microsoft Word - Printing 2 sheets per page on ledger - only prints 1/4 scale - and on top left corner of page and middle top 1/4 scale.

Printing 2 sheets per page on ledger - only prints 1/4 scale - and on top left corner of page and middle top 1/4 scale.

Posted: 14 Aug 2014 12:40 PM PDT

Okay - recently upgraded to Word 2010 here at work. We always have printed out ledger sheets with two pages per sheet. Problem is no matter what I try although the pages print out correctly (two per sheet) they only cover 1/4 of the page. I have checked off landscape, print two pages per sheet, scale to ledger, print on ledger. On the printer specs I have also checked print to paper size and landscape and ledger.

We use this ledger paper folded in half (hence the two pages per sheet)

Always worked before in previous word versions.

What am I doing wrong??

Missing symbols

Posted: 14 Aug 2014 11:49 AM PDT

I am using Microsoft Word 2010 in my work. I work in editing so I work on the same document several times. I also add all equations and symbols in math equation environment using the normal way or the shortcut equal plus space. The problem is that some symbols from the text disappear on saving the files and the change does not appear in the track changes. There is no pattern for the symbols that disappear. For example, the same symbol may disappear in one place in a file but does not disappear in another place in the same file. I also have copies from the files before working on them, that is, before the symbols disappear, so i tested if i made changes in the file would the symbol disappear or not. The weird thing is that the symbols disappear in most cases and not all cases; sometimes the symbol is not lost when i add a correction in its line. This is causing a lot of problems. I edit those paper through track changes and the clients will just find their documents missing symbols without even noticing! Please help.

Save As PDF in MS Word 2007 Crashes Word

Posted: 14 Aug 2014 11:38 AM PDT

I am trying to save a document as a PDF in Word 2007.  Every time I click save as PDF Word crashes.  I have tried reinstalling PDF readers and reinstalling the Save as PDF dll.  Please help.

creating a document that supports both left-to-right and right-to-left languges

Posted: 14 Aug 2014 11:14 AM PDT

Hi, I have a document in English that needs to be circulated to and used by many people. It is in English, but there is one section that some people will use to copy and paste text (like an article) that is in a right-to-left language. How can I set the document up so that Word does not reverse this text to the wrong direction when people do this? 

Error VBE7INTL on word 2015

Posted: 14 Aug 2014 10:36 AM PDT

I keep receiving this error message "The language DLL VBE7INTL.DLL could not be found" only with word files .All my microsoft programs are working fine except word. I am working on windows 8 and office 2015. Any support please ?

Thanks,

Word not working

Posted: 14 Aug 2014 09:01 AM PDT

I have window 8, office 2013.  When I attempt to open a word file I get the error message "Word is not working".  i do not have ABBEY Add in.  I have had a couple of IT guys look at this to no avail.  Any suggestions?

"ungroup" button grayed out MS Word 2013

Posted: 14 Aug 2014 08:25 AM PDT

I have taken my pic out of "in line with text", but my ungroup button is still grayed out.  Why? 

Office Web Apps SharePoint 2010 Unable to Co Author with Word in Browser

Posted: 14 Aug 2014 08:11 AM PDT

We have deployed office web apps (SharePoint 2010) and are able to co-author with Excel.

When attempting to co-author with Word .docx files in any document library we receive the following.

"Word Web App cannot open this document for editing because it is currently being edited by another user."

Any assistance on resolving this would be greatly appreciated.

Microsoft Word

Posted: 14 Aug 2014 07:05 AM PDT

I have it downloaded on my computer and it still doesn't work. Whenever i try to type it says the keyboard is locked. I have no idea what to do about it. It also says that I need to either get a code for it or I have use a different account. Does anyone have advice on how to fix it?

Word 2013 autocorrect, ignore Java properties (prop1.prop2.prop3)

Posted: 14 Aug 2014 05:49 AM PDT

Hello

Is there any way, to ignore spellchecking for words written in a format as in title (prop1.prop2.prop3 and longer). I need to use such conventions at work a lot, and it's really annoying. Is there something like a filter to exclude all words with *.*.* or something like that? The "Ignore web address" feature does not recognize such strings as url and does not stop spellchecking.

I'll be grateful for any reasonable solution.

Regards, Greg

Can I downgrade Office 2013 to 2010 and get free proofing tools?

Posted: 14 Aug 2014 03:22 AM PDT

Hi all,

If i purchase Office 2013 and downgrade it to Office 2010. Do i get free proofing tools also for 2010 v?

Thanks in advance.

Regards,

Andrea

[Moderator note: Split from the thread at http://answers.microsoft.com/en-us/office/forum/office_2010-word/proofing-tools-for-office-2010/7f16aa4a-1a70-450c-a0dc-1d12f18e3675]

Utilisation de word et excel,

Posted: 14 Aug 2014 03:14 AM PDT

Bonjour,

Les Lors de l'utilisation de mots et Excel, m'on m'indique qu'il ya Problème non.

Que Dois-je faire?

PS fonctionne Outlook.

Cordialement

Creating default page template in a word documents?

Posted: 14 Aug 2014 01:57 AM PDT

I was wondering about word page templates - A client of mine wants to be able to have landscape pages in their portrait document. I have set up a watermark and margin for the regular portrait inner pages and set up a 'template' for the landscape pages with a landscape watermark and different margins - is it possible to enable word to select the correct template for the orientation of the page within the document?

Basically can you set up page templates so that you can select which template you want for that page?

I know how sections work and it's whether you can bring in the behaviours of an old section into a new section later in the document without having to re-set all the margins and headers and footers etc?

(I am working on a mac but am also able to work on a PC if it is easier there)

Microsoft Word 2013. Drop down menu behavior (font, hightlight, bullets, numbering, etc

Posted: 14 Aug 2014 12:30 AM PDT

Hello all,

I'd like to ask a question on the behavior for Word in office 2013. 

Previously if I've wanted to use the last used highlight color or font color from the bar I'd just click the button and it would do what I've wanted it to do. If I've wanted the drop down I've clicked on the arrow and it's shown up as desired. 

Now with Office 2013 if I go to do the same, clicking on the icon produces a drop down menu only and then I need to navigate to the option I want. 

Is there any way to tune the behavior for Office 2013 in such a way that it is like how it used to be?

Regards Shane

Style Gallery Word 2013

Posted: 13 Aug 2014 10:33 PM PDT

I am using word 2013 to format a document. I have headings 1, 2 , 3 and so on which I select according to the layout of text I  want. The problem which I am facing is when it goes number 10 and displays as 1.10 or 1.10.1, the space between the word and the number increases,e.g. 2.10.5         Processes,    but the same for 2.9.5 is close. I tried to modify from the style but it doesn't  get it. I was wondering if I can get some help to fix it.

Thanks

Gary

Word 2007 multilevel list subheading problem

Posted: 13 Aug 2014 09:38 PM PDT

When I try to create a multilevel list I cannot advance the numbering/lettering.  I start the list enter data and attempt to advance to the next line:

a) blah

b) blah blah

I indent to create a sub heading, but this function is not working.  Instead of creating a sub heading:

a) blah

      i) blah blah

It just indents.

a) blah

b)     blah blah

I am sure this is an easy fix; I just don't know how to do it.  Thanks.

word 2013 fails to open word document attachment in mail client, can anyone help?

Posted: 13 Aug 2014 09:28 PM PDT

Acer laptop running Windows 8.1 with Office Home and Student 2013 and using Incredimail as a mail client.

Attempting to open an attached word document fails at the word splash screen with the message 'We're sorry, but Word has run into an error that is preventing it from working properly. Word will need to be closed as a result. Would you like us to repair now?'

Repair Now button has no effect.

If I right click the attachment and save to the desktop, Word will open the document OK

I have so far installed Office updates up to version 15.0.4641.1002 and removed the checks from Protected view in Word Trust Centre, and installed all available Windows updates.

I can't think of anything else to try, oh and by the way, the attached document originated from a system running Word 2013 on Windows 8.1.

Can anyone suggest anything else to try?

WHY IS MICROSOFT WORD ILLITERATE

Posted: 13 Aug 2014 09:16 PM PDT

wHY IS mICROSOFT wORD ILLITERATE HUH?

How to do simple multilevel list

Posted: 13 Aug 2014 04:04 PM PDT

I have Word 2013 and am trying to create just a simple two level list for example:   I.  First level

                                                                                                                             a) second level   this is basically all I want to do but I can't seem to get things going.  I have searched on the internet and found a site that has like a 34 step procedure just to create 3 levels.  Surely there must be a simpler way.  I have been using Microsoft for years and the one thing I have noted is that explanations are user-friendly.  Well I'm stumped and would appreciate it if someone could hook me up with a link that has a cognitive way of explaining things.  It would be much appreciated.  Thanks.

Manny

How can I download Microsoft Word in Spanish?

Posted: 13 Aug 2014 03:41 PM PDT

im  kind slow in pc  tech and creating documents in pc  formats someone   can help me . please try  not  be so technical .as  I said I so slow. thanks any one anticipated. ray.

Microsoft CRM - Viewing All Activities of Account

Microsoft CRM - Viewing All Activities of Account

Viewing All Activities of Account

Posted: 28 Mar 2005 05:13 PM PST

You may also want to check out CustomerEffective's Interactions product.
It's free and performance is better than Activity Summary. We have used both
and are now with Interactions.


"Boolean1" <net> wrote in message
news:com... 
salespeople 

Test environment set up

Posted: 28 Mar 2005 01:33 PM PST

you can use virtualpc or even install a simple two server setup where one
server functions as a domain controller in a new forest (is disconnected
from your companies domain entirely) then add a second server to that new
domain. Users connecting to it from your production domain will get a login
prompt for their domain\username but that is not mich of an issue.

You can even use SBS 2003 to give the same result using one server.

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"AW" <microsoft.com> wrote in message
news:com... 
and 
just 
things 

Templates to multiple People

Posted: 28 Mar 2005 12:41 PM PST

I think you need you need to be using the browser client to have the Send
Direct Email option. From Sales for Outlook you get the Mail Merge option
instead


"Rob" <com> wrote in message
news:net... 

Combining Account Activities

Posted: 28 Mar 2005 11:45 AM PST

I'm sorry, I don't mean we want 'their' data. I mean I want to take
two Account records in our CRM and put them together. Widco no longer
exists, so we want to remove the Account record. However, since they
were bought by Acme, we want the history of Widco to show up under the
Acme Account record.

working offline on client outlook

Posted: 28 Mar 2005 06:11 AM PST

Thank you all for your replay.

Anyone Know How to Re-Install Outlook Client?

Posted: 26 Mar 2005 05:18 PM PST

Ok, are you delete folder in: program files/mscrm/mscrm?
if not then delete manually. search for any folder with
SQL or MSDE, try and tell me!
 
Exchange as they relate 
work around and 
in the process of 
profiles and the Outlook 
but are having 
teams laptops. I 
come up with nothing. 
Outlook client? 

Error when working with Accounts that have a deleted user still as

Posted: 25 Mar 2005 11:59 AM PST

Hi Brian,

If you recreate the account in AD it will not fix the issue, The reason
being the SID will not be the same as the previous account.

The solution to your issue lies in a hotfix mentione in the KB article: You
receive an error message when you try to assign Microsoft CRM records to a
valid user account after the original user account has been deleted from
Active Directory (835319).

This should resolve your issue.

Thanks and Regards
Jibran Ali
MSFT

"Brian Corbet - Midwave" wrote:
 

need scroll bar on user added field

Posted: 25 Mar 2005 10:43 AM PST

You're correct, there's no supported way to delete the field - Microsoft
Support should be able to help you out. - It's worth it to open a ticket
with them when you're ready.
Unfortunately, unless you're very SQL savvy the only way to know is that
when you try to add a new field to an object, it will fail and say that it's
unable to add the field.

** Never 'experiment' with updating any of the SQL tables directly - this
query is only a select against the metabase **
** If you try and update the database directly and make a mistake, it will
absolutely hose it up. - **

The following query can be run in SQL Query Analyzer to determine row length
in bytes. It should be executed against your metabase database for Microsoft
CRM. You have to enter the appropriate entityid's. These can be found in the
Entity table in the metabase.

SELECT SUM(Length) as TotalLength from Attribute WHERE EntityId =
N'{C0A328C7-B25D-4965-9E0B-BA7EF71A483E}' and IsLogical = 0

After custom fields have been added to the schema, the fields cannot be
shortened or deleted. You must restore both the MSCRM and METABASE databases
from a point before adding the custom attributes to Microsoft CRM objects.
Then access Deployment Manager to publish the customizations for all objects
to update the .xsl files.

If this makes your eye glaze over, then don't even attempt it. - just let
Microsoft handle it. -

Cheers!
Scott.

"AW" <microsoft.com> wrote in message
news:com... 

Error ID: 5895

Posted: 25 Mar 2005 10:38 AM PST

Saed -
I am receiving a similar error on my CRM server, but only for Contact. How
would the script differ?
Thanks,
Amy

"Saed Assaf" wrote:
 

revert back to pure-vanilla version

Posted: 24 Mar 2005 06:03 PM PST

Hi~

Your only option without having CRM database and Active Directory backups
is to reinstall CRM to new databases and then use data migration to bring
existing data from the old CRM install into the new installation.

Warm Regards,

Shawn Nulph | Microsoft CRM | Microsoft Business Solutions

Microsoft Online Partner Support

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ===
Business-Critical Phone Support (BCPS) provides you with technical phone
support at no charge during critical LAN outages or "business down"
situations. This benefit is available 24 hours a day, 7 days a week to all
Microsoft technology partners in the United States and Canada.

This and other support options are available here:
BCPS:
https://partner.microsoft.com/US/technicalsupport/supportoverview/40010469
Others: https://partner.microsoft.com/US/technicalsupport/supportoverview/

If you are outside the United States, please visit our International
Support page:
http://support.microsoft.com/default.aspx?scid=%2finternational.aspx.
================================================== ===
This posting is provided "AS IS" with no warranties, and confers no rights.
You assume all risk for your use. © 2005 Microsoft Corporation. All rights
reserved.

CRM Database Access for .Net Web Application

Posted: 24 Mar 2005 01:53 PM PST

One of the things you will lose is the security layer that CRM sdk layer
provides. If this is something which will be used by multiple people, then,
unless everyone can see everything, you will be letting users see things
which they otherwise would not have been able to.
Also, as Matt says, updating the database directly, is certainly not
recommended.
Is your main requirement/investigation around accessing the db directly? or
is it around writing a web application to access crm data? if it is the
second, you certainly dont need to go directly to the db...

Hari Prasad

"Matt Parks" wrote:
 

SFO email not being sent

Posted: 24 Mar 2005 09:07 AM PST

Actually ignor my last post, it was the SPAM filter.

The last auto update turned on a new any spam option which was blocking
outbound mail but only from CRM clients. I guess it must have been the guid
bit.

Thanks for the hint.

Andy

"Andy Shore" wrote:
 

Manage Licenses / Can remove

Posted: 23 Mar 2005 08:52 PM PST

Are you trying to add a user back to CRM with the exact name that was
deleted? If so you will not be able to do this.

Warm Regards,

Shawn Nulph | Microsoft CRM | Microsoft Business Solutions

Microsoft Online Partner Support

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ===
Business-Critical Phone Support (BCPS) provides you with technical phone
support at no charge during critical LAN outages or "business down"
situations. This benefit is available 24 hours a day, 7 days a week to all
Microsoft technology partners in the United States and Canada.

This and other support options are available here:
BCPS:
https://partner.microsoft.com/US/technicalsupport/supportoverview/40010469
Others: https://partner.microsoft.com/US/technicalsupport/supportoverview/

If you are outside the United States, please visit our International
Support page:
http://support.microsoft.com/default.aspx?scid=%2finternational.aspx.
================================================== ===
This posting is provided "AS IS" with no warranties, and confers no rights.
You assume all risk for your use. © 2005 Microsoft Corporation. All rights
reserved.

SFO Task Synch Error

Posted: 23 Mar 2005 08:23 PM PST

Thanks, Shawn, I'll let you know if this works.

Matt Wittemann
http://icu-mscrm.blogspot.com


"Shawn Nulph" wrote:
 

Turn back on CRM for Outlook 2003

Posted: 23 Mar 2005 02:20 PM PST

You may also need to uninstall the SFO Client. Add/Remove Programs can do
this fairly easily, though sometimes there is a .pst file that get in the way
when you try to re-install. The install wizard will tell you where to go to
remove it. Very rarely, you will have problems re-installing. The MS CRM KB
has many articles to resolve most of the more advanced issues with
re-installing the SFO Client. Search on the Text you receive with your error
msgbox and you should be able to find the appropriate article...

--Dodd

"posinet" wrote:
 

Unknown Contacts?

Posted: 23 Mar 2005 12:52 PM PST

Hi Gary,

Thanks for the post.

John is right on with his response. If the email address exists on two
records then a red question mark is displayed in either the To or From
field. CRM doesn't know which record to associate with the email.

Kind regards,

Mike Christl

This posting is provided "AS IS" with no warranties, and confers no rights.
You assume all risk for your use. © 2005 Microsoft Corporation. All rights
reserved.
Subscribe to: Posts (Atom)