Pages

Search

Microsoft Word - table formatting question/issue

Microsoft Word - table formatting question/issue

table formatting question/issue

Posted: 09 Mar 2013 08:52 AM PST

I would like to distinguish (highlight, underline, shade) the heading in a table from the rest of the table.  I have tried using Table Styles and Borders with limited success.

Any suggestions will be welcomed.  Proffer any ideas freely.

Best free on-line collaboration software that allows tracking changes

Posted: 08 Mar 2013 05:38 PM PST

I am lookng for free on-line software that allows for tracking changes so that both (or all) those working on a project can see all changes that have been made, and allow comments to be entered in the margins, and I would like to know if Microsoft Word 2010's SharePoint is the best program.  I have done a little research on-line and it seems most programs just allow one to see the versions of a document that are automatically saved every thirty minutes or so, and allow comments to be inserted, but do not allow one to track changes.  I have come to the preliminary conclusion that Microsoft Word's SharePoint is the best, but I just wondered if anyone had any ideas on this.

Which key will I type to get the sign of percentage

Posted: 08 Mar 2013 04:31 PM PST

Which key will I type to get the sign of percentage. I want to type percentage sign, for examples 10 percent, 20 percent, 90 percent and,so on, but I did not know the key that will give me the sign of percentage. I want type percent in sign not in words. So show me  how I will type it. from sage 180
i type in Microsoft Word 7.

When I receive a PDF I cannot open it in anything but gibberish

Posted: 08 Mar 2013 03:58 PM PST

When i receive a PDF and I try to open it with my Microsoft Word...which is not only alternative...I get gibberish like the following:

%PDF-1.5

%µµµµ

1 0 obj

<</Type/Catalog/Pages 2 0 R/Lang(en-US) /StructTreeRoot 62 0 R/MarkInfo<</Marked true>>>>

endobj

2 0 obj

<</Type/Pages/Count 8/Kids[ 3 0 R 18 0 R 39 0 R 42 0 R 45 0 R 53 0 R 56 0 R 59 0 R] >>

endobj

3 0 obj

<</Type/Page/Parent 2 0 R/Resources<</Font<</F1 5 0 R/F2 7 0 R/F3 9 0 R/F4 14 0 R>>/XObject<</Image16 16 0 R>>/ProcSet[/PDF/Text/ImageB/ImageC/ImageI] >>/MediaBox[ 0 0 612 792] /Contents 4 0 R/Group<</Type/Group/S/Transparency/CS/DeviceRGB>>/Tabs/S/StructParents 0>>

endobj

4 0 obj

<</Filter/FlateDecode/Length 956>>

stream

xœÍ™]o[7

 

Why is this and how can I correct it?

I so far have to save it to my desktop and then open it with my Adobe Reader.

Why is this? I used to be able to view any PDF whether it was from my e-mail {Microsoft Outlook} or if I was trying to download a PDF it would show up in English, as that is the language I speak. However, a few months ago, this is the kind of view I get when I click to open it. This jibberish means nothing to me. If anyone can help me I would be most grateful. I have no idea why this started as I have done nothing differend with my computer. Weird as it may seem, my husband's home computer does the same.

Helen Lehman *** Email address is removed for privacy ***

Word 2010 not replacing "-->" with arrow character

Posted: 08 Mar 2013 02:18 PM PST

In previous versions of Word entering "-->" would be automatically replaced with a light arrow pointing right, "<--" with a light arrow pointing left, "==>" with a heavy arrow pointing right, and "<==" with a heavy arrow pointing left. This does not seem to be happening in Word 2010. I can't find any options for this in the Auto-Correct/Auto-Format settings. What do I need to do in order to get this behavior back?

All Available Programs in Office 365 Home Immediately Close Upon Opening even after running quick repair and online repair

Posted: 08 Mar 2013 02:16 PM PST

I just purchased and installed Office 365 for Home. Every program in the Office Suite Immediately closes with the error message "something is wrong with the program and it is closing."  I need Word so I have been working with it first.  I followed instructions to disable the add-ins by running Word in Safe Mode.  Although I am the Administrator, I cannot remove the add-ins because the System doesn't recognize me as the Administrator. What are my next steps here short of uninstalling Office 365 and reinstalling Office 2010?

Create and save letterhead in Office

Posted: 08 Mar 2013 12:57 PM PST

I would like to create and save a letterhead as a template so that I can use it for all my letters.

Office Word icon becomes generic look

Posted: 08 Mar 2013 07:47 AM PST

I have the generic office word icon in my desk top after it install in my 64bit win 7 , but it works normally when I double click it, and my excel 2010 icon looks normal , only the word icon become generic, anyone can solve this problem?

Problems with deleting file from printer queue

Posted: 08 Mar 2013 02:11 AM PST

I have tried to delete a file from the printer queue - it says it is deleting but has not done so, and is stopping me from printing other files.  I am using a Kodak wireless printer.

Microsoft Works - Create PDF File From Works Data Base

Microsoft Works - Create PDF File From Works Data Base

Create PDF File From Works Data Base

Posted: 15 Sep 2004 05:34 PM PDT

Thanks so much. That program worked like a charm.
Dannie

"The Six Million Dollar Man" <$$$$$$@BigBucks.com> wrote in message
news:de... 
will 

outlook express HELP

Posted: 15 Sep 2004 06:35 AM PDT

G'day Michael,
What does POP3 stand for? Please



| Your mail service may offer a web interface that would allow you to read your mail via a
| web browser (e.g. Internet Explorer or Netscape) on any PC with an Internet connection.
| If not, you might be able to use http://www.mailstart.com or http://www.mail2web.com or
| similar service for this function (if your ISP allows outside access to their POP3 mail
| server).
|
|
| --
|
| Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm
|
|
| "kat" <microsoft.com> wrote in message
| news:15b101c49b28$ced5ed20$gbl...
| > HI,
| > im just wondering how i go about accessing my outlook
| > express from a computer other than my own at home. Please
| > provide a website if you have one
| > THANKS!!!
|
|

Office XP and Works Suite upgrade

Posted: 14 Sep 2004 08:06 PM PDT

Do a custom install and choose only the programs you need.

--
Paul Ballou
MVP Office
http://office.microsoft.com/clipart/default.aspx
http://office.microsoft.com/templates
http://office.microsoft.com/home

Control the things you can and Don't Worry about the things you can't
control.

"Bob" <microsoft.com> wrote in message
news:254e01c49ad0$fb2d6db0$gbl... 

Installing Dictionary

Posted: 14 Sep 2004 05:37 PM PDT

This occurs because Works 7 and Works 8 do not share their
proofing files with other applications.

Perhaps this help:
http://www.geocities.com/vampirefo/

HTH,
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works) 1999-2004
Website & FAQ for Works: http://www.btinternet.com/~kevin.james1/index.htm





"pedestrian" <microsoft.com> wrote in message
news:019101c49b46$09782020$gbl... 

Shared files

Posted: 13 Sep 2004 06:57 PM PDT

Success ... worked like a charm! Thank you.

Next time I won't snooze when it says, "Do you want to
delete shared files?"

joel
 
before you 
http://www.btinternet.com/~kevin.james1/index.htm 
message 
the 
I 

print screen key doesn't work?

Posted: 13 Sep 2004 06:16 PM PDT


Works: Cannot Paste Object from Clipboard into a Word 2000 Document
http://support.microsoft.com/default.aspx?scid=kb;en-us;265930&Product=wrk

SYMPTOMS

When you try to paste an object from the clipboard into a Microsoft Word
2000 document, the selection may be unavailable.

CAUSE

This issue may occur if all of the following conditions are true:
You installed Microsoft Word 2000 from the Microsoft Works Suite 2001 CD-ROM
set.
The object on the clipboard is from a source other than Word 2000.
You started Word 2000 after you copied the object to the clipboard.

Note When you start Word 2000, the clipboard is cleared of all of its
contents.

RESOLUTION

To resolve this issue, open Word 2000 before you copy an object to the
clipboard.

To work around this issue, remove the Word in Works Suite Add-in. To do
this, follow the steps below.

Note If you remove this Add-in, you remove Works Suite Task Launcher's
ability to see any Word 2000 tasks. You will need to do any word processing
functions outside Works Suite Task Launcher.

Uninstall Word in Works Suite Add-in

1. Click Start, point to Settings, and then click Add/Remove Programs.
2. Double-click Microsoft Works Suite Add-in for Microsoft Word.
3. Follow the prompts for the removal.

"Ken" <ne> wrote in message
news:Ou$phx.gbl...
Hi Di,

Open Microsoft Word before print screen key is used.

You will find copying and pasting anything into Word requires it to be open
before the copy is made.

Works Word processor is also included with Works Suite. Works Word
processor does not have to be open before copy is made.

Because Microsoft Word is included with Works Suite, Works Word processor is
hidden. To use the Works Word processor, search for WksWP.exe , right
click, select Send To, click Desktop (create shortcut). Open Works Word
processor from Desktop.

Hope this helps,
Ken

"Di" <microsoft.com> wrote in message
news:040001c499f8$6d0b4210$gbl...
Hi,
I have XP, Works 7.0. My old Works 4.5 allowed me to hit
the print screen key, and then paste that picture into
the Works 4.5 word processor. I mainly used this to print
a list of the files in a particular folder.

Word 2002 in my new Works 7.0 won't allow me to paste
into the word doc.

How can I print a list of folder contents?
Thanks,
Di

Charting data in works???

Posted: 13 Sep 2004 03:16 PM PDT

Further to Paul's response,
In 4.5a

In a spreadsheet, have two adjacent lines of data
eg: have I column with six dates,
then alongside in another column enter 6 random numbers.

Mark the block, so the dates and numbers are black,
click ...tools
click....create new chart
remove "first time help"
click the chart you want........finished

You can fumble around after that, to get the matrix you desire
and to get a feel of what happens, each time you close
it will save the chart as "Chart 1, 2 etc, so you may
have to remove some after each try you make.
(It's good fun, charting)




--
com.au
(Remove gum to reply)


"deb" <microsoft.com> wrote in message news:198701c499df$61802000$gbl...
| How do we make a data source & then chart it? Please keep
| it simple - for 3rd grade assignment.
| Thanks!
|

Apple to MS - Data Base w labels

Posted: 13 Sep 2004 03:14 PM PDT

It sounds like you have Microsoft Office. Word can do
labels.
 
of 
1200 
problem 
 
 

Spanish Dictionary for Works 7.0

Posted: 12 Sep 2004 04:33 PM PDT

Sorry you're having a problem. I have no problem
accessing it. Perhaps try an alternate browser?

 
page. 
www.freelang.net 

Works Calendar-How do you back it up?

Posted: 12 Sep 2004 02:45 PM PDT

This folder is often hidden and must be enabled, for view or search.

HTH,
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works) 1999-2004
Website & FAQ for Works: http://www.btinternet.com/~kevin.james1/index.htm





"pedestrian" <microsoft.com> wrote in message
news:0de001c49949$aef79520$gbl... 

Need diacritical marks in database in Works Suite 2004

Posted: 12 Sep 2004 10:15 AM PDT

Hi Di,

Both Excel and Access support Unicode (& diacritical) characters.

HTH,
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works) 1999-2004
Website & FAQ for Works: http://www.btinternet.com/~kevin.james1/index.htm





"Di" <microsoft.com> wrote in message
news:03fd01c499f7$9c6086c0$gbl... 

Did You Know - 2

Posted: 12 Sep 2004 02:07 AM PDT

Sorry, no disrespect meant,
must have been a Freudian slip.

So if MS <gets> overun with orders...............:) was my intention.


| So if MS gates overun with orders..................:)

Project file into Power Point Microsoft Project

Project file into Power Point Microsoft Project

Project file into Power Point

Posted: 07 Jun 2004 01:26 PM PDT

use print screen thats gonna work. 
and the Gantt chart. (I think this answers your question).
I have tried to use the Copy Picture to Office Wizard, but
when I get to the part where I choose Power Point, or
another application, and portrait or landscape, it doesn't
let me select anything...nothing gets chosen when I click
on it. Am I doing something wrong? Is there a better way
to do this besides Copy Picture to Office Wizard? Thanks. 

formatting a MS Project task row in the Gantt chart?

Posted: 07 Jun 2004 08:45 AM PDT

No, there's no way to format cells even using filters!

Ask Microsoft :)


Mike Glen
Project MVP


microsoft.com wrote: 

Finish to Finish

Posted: 07 Jun 2004 07:56 AM PDT

Hi Chris,

Welcome to this Microsoft Project newsgroup :-)

Trying hard to read your mind - try setting up a milestone for the finish of
each sub-group and link those FF.

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP

Chris wrote: 

Timesheet reporting

Posted: 07 Jun 2004 05:48 AM PDT

Many thanks Dale.

Do you know whether Project has the facilty on the
timesheet for a resource (user) to enter the ammount of
time there is to complete per task on a timesheet?
Meaning that a task length in a project can shorten or
lengthen depending on the feedback from the resource
(assuming the project manager approves the timesheet).

Thanks,

Andy

Where Does Project Server Data Get Stored

Posted: 05 Jun 2004 03:58 PM PDT



----- Ken Popkin wrote: ----

I would like to know the following

1. When I used SQL's Enterprise Manager to look at the underlying databas
I was surprised to find six project server databases labeled ProjectServer
ProjectServer2185, ProjectServer6028, ProjectServer6405, ProjectServer9232
and ProjectServer9880. Why are there six project server databases and whic
one is storing the data

That means, the Project server was installed several times already. (install, uninstall, install, uninstall ...
If you did it in one, you should only have "ProjectServer"

2. What tables are being used to store the data. I looked in MSP_Resource
and MSP_Projects, but didn't find any of my data

It's a relational database. Data for one project are spread in several tables

3. Are there any write-ups that explain the database schema

There's a link somewhere that documents the DB schema in visio format. Haven't found an explanation yet either

4. The reason I am asking is that we may want to write some of our ow
stored procedures to extract data. Is this a good approach or should
stick with the API's that are mentioned in the documentation

It's best to go with API's rather than a direct link to the database

Thanks in advance for your help

Ken


--
rom flore
PSS

Purpose of duration units.

Posted: 05 Jun 2004 09:21 AM PDT

Thank you for the help

Have a nice day.

change contraint default - Project Professional 2002

Posted: 04 Jun 2004 02:56 PM PDT

The constraint "SNET" being applied automatically is usually a result of
specifying a start date for a task. A basic purpose of Project is to
calculate the task schedule for you, given the project start date, task
durations, and task linkages, and as such you should never, ever input
individual task start and end dates except in those rare circumstances where
you really do intend to have a constraint applied.


--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"markel" <microsoft.com> wrote in message
news:com... 
"Start no earlier than" on it. Does anyone know how I can change this
default to a contraint of "As soon as possible". 

Inserting material / tooling costs

Posted: 04 Jun 2004 01:58 PM PDT

Hi Doug,

Welcome to this Microsoft Project newsgroup :-)

There is a Fixed Cost field for just this type of costing. Insert a column
and select Fixed Cost or, better, View/Table:Entry/Cost.

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP

Doug wrote: 

Target versus Published

Posted: 04 Jun 2004 10:16 AM PDT

Spiro T --

In the sample DB, the Project Server administrator created an additional
Version called Target, which probably serves as the original "agreed upon"
version of the project before beginning work. The Published version is
always the current production copy of the project. Your Project Server
administrator could create one or more Versions in your own envrionment,
based on the communication and tracking needs of your organization. If no
custom Versions are created, then the only available project Version will be
the Published version. Hope this helps.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
"We wrote the book on Project Server"


"Spiro T." <ca> wrote in message
news:z68wc.132221$bellglobal.com... 

Blank date

Posted: 04 Jun 2004 08:36 AM PDT

Hi Majid,

In a template, the start date is immaterial. When you open the template,
immediately Save As... and give it a new name. Then run the Adjust_Dates
macro to enter the new project's start date.

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP

Majid wrote: 

Work before project actually starts

Posted: 04 Jun 2004 08:06 AM PDT

another consideration would be the effect of the planning phase to the project itself

If planning does not affect the duration, task list and cost of the project, you may incorporate it without any problems

If it does, you may want to divide it

--
rom flore

changing baselines in Views

Posted: 04 Jun 2004 07:55 AM PDT

No.

Mike Glen
Project MVP

Spiro T. wrote: 

I have forgotten some basics

Posted: 03 Jun 2004 04:56 PM PDT

Hi Donna,

I don't really understand what you're trying to do :( I don't know what you
mean by getting the number to balance - what number? and balance with what?
You assign a resource to the task to undertake the necessary work to finish
the task - you can't fiddle that - it must have a number of manhours of work
to complete. You can't adjust the number of hours as the work might not be
completed in that time. As to your final comment, if you enter 50 manhours
of work, Project will work out the cost based on how you've set up the
parameters of working time and calendars. Can you be more specific on what
you're trying to achieve and how you are doing it?


Mike Glen
Project MVP



Donna wrote: 

BCWS in EV report

Posted: 03 Jun 2004 04:17 AM PDT

Do you have resources assigned to those summary tasks? If so that will
seriously distort the work values, thus BCWS. With only one exception that
I can think of offhand, one should never assign resources to summary tasks.

--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Paul Lemke" <microsoft.com> wrote in message
news:17c1c01c4495c$4e62e760$gbl... 

Microsoft Word - MS Word : Characters lost in PDF conversion

Microsoft Word - MS Word : Characters lost in PDF conversion

MS Word : Characters lost in PDF conversion

Posted: 08 Mar 2013 03:15 AM PST

MS Word 2010.

I find that underscores are lost in some places in my document when I convert to PDF.

Well the underscores are not actually lost: If I copy the text from the PDF and paste it into Notepad I can see the characters are actually there.

It is pretty easy to reproduce:

Take a blank document and input these lines:

 

Here is an underscore _in some text

Here is an underscore _in some text

Here is an underscore _in some text

Here is no underscore

 

  1. Make sure the font is "Courier New" (size 11). Not sure if the size matters but it certainly matters that the font is "Courier New" if you want to reproduce.
  2. Make sure to color the background as I do. I use one of the "theme colors", called "Dark Blue, Text 2, Lighter 80%" but I do not think it has significance which background color you use.
  3. Make sure to use line spacing : single and line spacing "Don't add space between paragraphs of the same style"
  4. Now try to export to PDF using Word's build-in feature for the purpose (i.e. Save As ...).


In the PDF it looks like this:




Here is an underscore  in some text

Here is an underscore  in some text

Here is an underscore _in some text

Here is no underscore




 What is that ?



Pls help.

Permanently change language in Template

Posted: 08 Mar 2013 12:59 AM PST

I am a naturalized American of British origin, and my system language is US English.  

I have a Word template TmplUK which is set to UK English which I use frequently.  

Sometimes I need a US English document, so I use TmplUK  and ctrl-a and select US English from the language tab at the bottom of the screen.  This seems to work fine. 

I realized I should make a clone of that template which is US English.  

I edited the TmplUK template and tried the above method and saved it as TmplUS.  I created a new document using the new template, pasted in some text, and it was correctly in US English.  Then I realized I had made a mistake and deleted all the text I had pasted.  The document reverted to UK English.

How do I set the base language of a template?

Word 2010 Creating TOC out of a multi-level list

Posted: 07 Mar 2013 08:59 PM PST

I have a 50 page word document that is one gigantic multi-level list (all the same list--goes down about 7 levels at it's deepest). I need to create a automated TOC from the list using the first 3 levels however I can't figure out how to do it because TOC's only seem to work off of the "heading" styles. I can't even apply a heading style on a list item because it removes it from the list when it applies the style. Is there any way to create a TOC out of a multi-level list automatically? Maybe a macro can convert it to something word can read but I still can't think of how to do it since the heading styles remove the list item when applied. Anyone have an idea on how to do this?


Thanks for your time.

English (UK) and spellchecker

Posted: 07 Mar 2013 01:37 PM PST

I have English (UK) as my default language in Office 2013 but the dictionary is by default English (US).  The spellchecker does not highlight any mistakes.  I cannot add any other language, even English (US).  Help please.

How to wrap text inside a custom shape to the borders of that custom shape, not a generic square "text box"?

Posted: 07 Mar 2013 12:20 PM PST

Hi All - a simple (I hope) question. I've drawn a "custom" shape, and added text to this shape. However, it is wrapping according to a "square" text box, not the lines that form my custom shape. How can I make the text wrap according to the shape I have drawn? Currently the text is going outside the lines I've drawn. I couldn't figure out how to upload a picture - so I've tried to creat an example of my issue below below:

 

 

This is what it currently looks like (imagine the dashes/vertical lines are the outline of my shape, and the "x"s are my text) 

 

------------------------------------------------------------

|                                                                           \

|  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  \ xxxxxxxxxxxxxxxxxxxxx

|  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \ xxxxxxxxxxxxxxxxxx

|  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \ xxxxxxxxxxxxxxxxxxx

|  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \ xxxxxxxxxxxx

|                                                                                     \

|                                                                                       \

|                                                                                         \

------------------------------------------------------------------------

 

This is what I want it to look like:

 

-----------------------------------------------------------

|                                                                         \

|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \ 

|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \ 

|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  \

|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \

|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \

|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \

|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \

----------------------------------------------------------------------

i deleted a user file that had a lock icon on it.

Posted: 07 Mar 2013 11:57 AM PST

i deleted a user file that had a lock icon on it. i thought that files would be found in the recycle bin, I have lost many documents & the ability to edit - word docs are now read only.  I removed & reloaded 2007 office home & student. i was trying to correct an error by a bad tech.  where are these files or  how do I retrieve missing data? i do not have complete back up - & what is available  does not help. I have tried to do a system restore & that does NOT function.  thank you

Is it possible to set the default font for label printing?

Posted: 07 Mar 2013 08:24 AM PST

Trying to set the default font that is used to print labels - I "see" the correct font in the dialogue box, but that's not what ends up being printed.
Thanks

number that is sequential.

Posted: 07 Mar 2013 03:45 AM PST

When doing invoicing or example, I want to give it a number that is sequential but I want to automate this not for me to track it with a register.

Mail Merge records into table columns with more than one merge field in a column.

Posted: 06 Mar 2013 06:39 PM PST

Using Word 2010 I need to mail merge data out of an excel spreadsheet into a word table.

The record info on the word document need to populate from left to right and in some columns in the word table I need to have more than one merge field info. It involves quite a large amount of records.

Word will not open

Posted: 02 Mar 2013 11:06 PM PST

I'm trying to open Word 13 and running Windows 7, I keep getting a pop up saying Office is busy. I've had problems before with Word and Excel not opening properly but this was fixed by the IT team. Please help!Word 

unable to send external email - Microsoft Exchange

unable to send external email - Microsoft Exchange

unable to send external email

Posted: 06 Aug 2004 11:33 AM PDT

IMS = Internet Mail Service. I don't have an Exchange 5.x server handy (it's
been a while) but open Exchange Administrator -

Maybe this will help?
http://www.exchangeadmin.com/Articles/Index.cfm?ArticleID=15729

nigelcourtney wrote: 

Exchange MAYOR SECURITY Issue

Posted: 05 Aug 2004 02:35 PM PDT

On Thu, 5 Aug 2004 21:12:51 -0400, "Mark Fugatt [MVP]"
<com> wrote:
 

I'm guessing it was the mayor. He has major issues, you know.

incorrect 'received' time on interoffice mail

Posted: 05 Aug 2004 10:02 AM PDT

Check the time zone on the affected workstation. The time may show correctly, but if the time zone is off you can have mail arriving before it was sent or hours later.

"Rusty Lentz" wrote:
 

Global Address book not updating.

Posted: 05 Aug 2004 06:44 AM PDT

thank you very much that was the answer.

"Lanwench [MVP - Exchange]"
<donotsendme.unsolicitedmail.atyahoo.com> wrote in message
news:phx.gbl... 

need to sync a pda with a shared calendar

Posted: 04 Aug 2004 06:07 PM PDT

 

Nope, ActiveSync doesn't support public folders. Pocket Lookout should,
though. http://www.vonkensoftware.com/lookout/

--
-Ben-
Ben M. Schorr, MVP-OneNote
OneNote FAQ: http://home.hawaii.rr.com/schorr/Computers/OneNoteFAQ.htm
SchorrTech Blog: http://www.thespoke.net/MyBlog/bschorr/MyBlog.aspx

Checking OWA availability

Posted: 04 Aug 2004 04:50 PM PDT

OWA will authenticate but never serve the page. All IIS services appear up
but they hang upon restart so I assume a process is hung.

I guess if there was a utility that could login, pull a page, then logout,
this would do the trick, unless there is a better way.


"Neil Hobson [MVP]" <silversands.co.uk> wrote in message
news:e3ug1$phx.gbl... 

OWA-IIS Settings Lost After Reboot

Posted: 02 Aug 2004 01:52 PM PDT

If you are changing the authentication setting, for the Exchange virtual
directory, in the IIS console, then the reason you are seeing it get
overwritten is because Active Directory is overwriting the IIS Metabase
with what it has for the authentication settings. In order for the back
slash (\) to not get overwritten, you must change the Exchange virtual
directory's authentication settings(& the public virtual directory's)
authentication settings through the Exchange System Manager console.

Org name -- Administrative Group -- <name of administrative group> --
Servers -- <server name> -- Protocols -- HTTP -- Exchange Virtual Server --
<properties of the Exchange directory> -- Access tab -- Authentication
button.

When you changed the authentication settings, in ESM, the changes are
written to Active Directory, which then overwrites what is in the IIS
Metabase.

===================================
From: Kevyn Pietsch[MSFT]

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at:

http://www.microsoft.com/info/cpyright.htm

===================================

XP Professional install - Microsoft Office forums

XP Professional install - Microsoft Office forums

XP Professional install

Posted: 24 Jun 2004 05:04 PM PDT

If the OP:
"I had XP Professional installed" by the manufacturer it is oem and by license is non transferable to any other system.
He can view this information by going here on his system:
Start/Help and Support/See Also/Tools/My Computer Information
Operating System PID will show if the os is oem.

Chris Schatte
--
use the Office Online web based newsreader here:
http://www.microsoft.com/office/community/en-us/default.mspx
In Office System 2003 applications:
Help/Assistance Pane/open Communities


"Erik" wrote:
 

Problem with Office XP assigned via GPO on SBS (long post)

Posted: 24 Jun 2004 03:44 PM PDT

zxc,
Did you search the group for your specific problem? You can also search google groups if the following does not apply.
I used that as a reference that we use with Office System 2003/SBS 2003. Thought it might help you.
We use now a mixture of Office 2003 and Red Hat as server, major pain is an understatment. Thats why were switching to SBS 2003.
There could possibly be more information here:
http://www.microsoft.com/windowsserver2003/sbs/techinfo/default.mspx
Someone else may have better suggestions...

Chris Schatte

--
use the Office Online web based newsreader here:
http://www.microsoft.com/office/community/en-us/default.mspx
In Office System 2003 applications:
Help/Assistance Pane/open Communities


"zxc" wrote:
 

Where is the foreign language keyboard download now?

Posted: 24 Jun 2004 09:02 AM PDT

Office Shortcut Bar.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.

After searching google.groups.com and finding no answer, M Skabialka asked:

| OSB??? What is that?
|
| "Milly Staples [MVP - Outlook]"
| <org> wrote in message
| news:ecMVb%phx.gbl...
|| I don't know - you are welcome to find out. Possibly installing
|| just the OSB would be sufficient but I tend to believe you need to
|| install a full program.
||
|| --
|| Milly Staples [MVP - Outlook]
||
|| Post all replies to the group to keep the discussion intact. Due to
|| the (insert latest virus name here) virus, all mail sent to my
|| personal account will be deleted without reading.
||
|| After searching google.groups.com and finding no answer, M Skabialka
|| asked:
||
||| What would be the minimum amount of Office 2000 or 2002 I would have
||| to install? Can I drill down and select some insignificant part in
||| the setup program and still use the Visual Keyboard with Office
||| 2003?
|||
||| Thanks,
||| Mich
|||
||| "Milly Staples [MVP - Outlook]"
||| <org> wrote in message
||| news:phx.gbl...
|||| The VIsual Keyboard? It does not work with Office 2003 unless you
|||| have a 2002 or 2000 product installed per the posts in these
|||| groups.
||||
|||| --
|||| Milly Staples [MVP - Outlook]
||||
|||| Post all replies to the group to keep the discussion intact. Due
|||| to the (insert latest virus name here) virus, all mail sent to my
|||| personal account will be deleted without reading.
||||
|||| After searching google.groups.com and finding no answer, M
|||| Skabialka asked:
||||
||||| Office 97 had a feature you could download from Microsoft where
||||| you could enter characters in a different language script, like
||||| Japanese, using a characater keyboad. It was called Enhanced
||||| Language Module
||||| or something like that. I installed Office 2003 and no longer
||||| have it. Since I can't remember the exact name I am unable to
||||| find it at Microsoft.
|||||
||||| Can anyone tell me where I can get this, and what it was really
||||| called?
|||||
||||| Thanks,
||||| Mich

MS Office Initial Start Up Username, Initials, and Company name prompt

Posted: 23 Jun 2004 11:15 AM PDT

Hi,

I'm using Office 2003 Pro, installing from an Office Admin Point with
an Enterprise License Key.

There are roaming users but no roaming profiles.

Thank you.


"Bob Buckland ?:-\)" <75214.226(At Beautiful Downtown)compuserve.com> wrote in message news:<#phx.gbl>... 

Limit reached?

Posted: 22 Jun 2004 07:26 PM PDT

PSimon wrote: 

It sounds to me as though someone forgot to activate....

office cannot read any files

Posted: 22 Jun 2004 11:31 AM PDT

Hi Parker,

Glad to hear the problem has been resolved. :o)

Have a nice day!

Sincerely,

Arnold Gao

Microsoft Partner Online Support


Get Secure! - www.microsoft.com/security

================================================== ==
When responding to posts, please "Reply to Group" via
your newsreader so
that others may learn and benefit from your issue.
================================================== ==
This posting is provided "AS IS" with no warranties, and
confers no rights.

Remove Office XP completely?

Posted: 20 Jun 2004 08:13 AM PDT

Thanks for the help. This utility did allow me to remove and then
reinstall Office XP and this time it did repair the problem areas.
However, recently-used-file lists and old non-existent Excel Macros were
still listed in Word and Excel. So although I fully uninstalled,
removed folders and all other files that seemed at all associated with
Office, then ran the utility, some files are apparently stored elsewhere
or some entries are left in the Registry.
I even installed Office on a new computer that had never had Office. I
then noted all the new files that were created that day and deleted them
during my uninstall.

Bill

Milly Staples [MVP - Outlook] wrote: 
Subscribe to: Posts (Atom)