Pages

Search

Microsoft Word - Public Key Infrastructure (PKI) Features are Supported in Microsoft Products?

Microsoft Word - Public Key Infrastructure (PKI) Features are Supported in Microsoft Products?


Public Key Infrastructure (PKI) Features are Supported in Microsoft Products?

Posted: 21 Jun 2014 12:59 PM PDT

Team:

Can you tell me what if any PKI features are supported in Word (I'm using Word 2013) or Windows (I'm using Windows 7) or any other Microsoft programs.  I was wanting to create a Private and Public signature key to use for emails I send.

Setting 2-point leading in MS Word 2013 for Century Schoolbook font

Posted: 21 Jun 2014 11:55 AM PDT

          I am working on a legal brief with very exact requirements.  I am using Century Schoolbook font in Office 2013.  I am required to use 12-point type for text and 10-point type for footnotes, but each must have 2-point leading.  Documents not meeting this requirement will be rejected.  All 50-plus bound copies..  A mistake will cost me a couple of thousand dollars, so this adds to my incentive to get this right.

          The Microsoft help function has no information I could find.  Ditto for Internet searches.

          How do I set 2-point leading for this font in Office 2013?

                       Rick

Spell checking a txt file and saving it without a warning

Posted: 21 Jun 2014 10:34 AM PDT

I know it has been asked for Office 97 and again for 2003, and the answer was no, but is there any way to suppress the warning message when I open a plain text file, or almost any format except .doc or .docx, spell check or otherwise edit it, and then save it again as the same format?

I've been using text files since 1988, I know their limitations. In fact, it actually helps as I've been posting to several web forums whose scripts or whatever suppress the browser's built-in spell check or to mailing lists that suppress HTML and so striping the formatting is necessary.

Is there any way to stop being warned about not supporting features every time I hit save in that format, especially when I haven't used any of those features? It's annoying, and I was told it couldn't be suppressed in Office 2003 (or 97, or 2000). What about Office 2007? Office 2010? Later?

Word 2013 Custom XML Part - location on drive?

Posted: 21 Jun 2014 10:26 AM PDT

Hi,

I am just getting started with Content Controls in Word. After spending numerous hours, I could figure out that this will help me align my agreements by using Custom XML Part along with Content Controls. However, if I need to add/modify/delete any thing from the XML, there is no interface. I tried searching for this on local drive (some file with the mapping), using VBA (ok, that was too complex and i closed) and the web. But so far no success... :-(

any suggestions?

PS: What am I trying to do? create templates for agreements (like NDA, services agreement, contracts etc.). For this, I needed an option for using variable place-holders inside word and lock-out the remaining content. Objective accomplished so far but I am open to any further suggestions. I looked into SharePoint but it was too complex for me to get around.

Thanks,

Faisal

how can i obtain my product key to reinstall microsoft word onto my laptop if it was already installed when i bought it but got erased

Posted: 21 Jun 2014 08:29 AM PDT

how can i obtain my product key to reinstall microsoft word onto my laptop if it was already installed when i bought it but got erased

Error message.

Posted: 21 Jun 2014 07:15 AM PDT

My Word 2013 has started to give this error message.  Th Function you are attempting to run contains Macros or content that requires macro language support.  How can I overcome this problem ?  My version of Office was already installed on my laptop when I purchased it "Microsoft Office Pro 2013" so I do not have a release disk but I do have the Product Identifier Code.  Can I un-install Word and then re-install to solve this problem ?  Help please.  Thanks Michael C. Mahon.

Upgrade to Office 2010 from office 2007

Posted: 21 Jun 2014 06:02 AM PDT

Dear sir how to do a above mentioned as I am having Office 2010 activation key from office 2007. thx

Office 2013 & DELL

Posted: 21 Jun 2014 05:02 AM PDT

Running Office 2013 on a DELL Inspiron PC, Windows 8.1

Whenever I try to use any of the suite (especially WORD & EXCEL), the mouse pointer alternately (several times a second) turns into the rotating blue circle, as though the PC is busy trying to do something in the background. This makes accurate positioning of the pointer almost impossible. Even after several restarts of the PC, this continues . . .

Anyone any ideas???

File menu doesn't work

Posted: 21 Jun 2014 03:49 AM PDT

I am using Ms office 2003. Whenever I try using any of the "file" drop down menu options they don't work such as " save as". However all of the other drop down menus (edit, view, etc) do work. I have tried to reinstall with no success I've run antivirus no success. This is frustrating.

Remembering different view settings for different documents

Posted: 21 Jun 2014 03:34 AM PDT

Hello,

I work with different documents that have different page layouts, font sizes etc, such that each is optimally viewed in a certain layout (e.g. web/print) and at a certain zoom level. In Word 2010, each document rememebered its last view, but in Word 2013 it seems that applying a certain layout&zoom level to one doc makes all other docs be displayed with the same setting, which is very inconvenient.

Is there a way to make these view settings rememebred document-wise?

Thanks!

Word 2010 Indexing Questions

Posted: 20 Jun 2014 10:39 PM PDT

I'm getting ready to index a book of about 300 pages. The topic is computer programming, and the material is very technical. I've written and indexed similar  books in the past, so I have some idea what I want to do, but in the past, I used FrameMaker. This is my first index with Word. I have some questions about things I know I want to do, but can't find information about on the web:

  • How can I apply character styles to parts of index entries? Many index entries will have words that should be styled with my "Code" character style, but I have not been able to find out how I can apply character styles to parts of index entries (in some cases only parts of words). How can I do this?
  • Is it possible for me to put multiple related index entries in a single XE field? It's common to want to rotate the words of a phrase to produce multiple index entries, but all the rotations are part of a single logical unit. For example, I might want a single location in the document to correspond to the entries "false sharing, cache lines and", "cache lines, false sharing and", and "sharing, false, cache lines and". Putting such entries in different XE fields is not only a lot of extra work, it artificially inflates the number of XE fields to manage, and it makes it harder to ensure that logically related entries are consistently updated when changes need to be made.
  • Is it really impossible to have index entries automatically link back to their sources? If something looks wrong in the index, it's natural to want to jump from the wrong-looking index entry to the XE field that gave rise to it. This is especially important if there are many XE fields on a page, which is common in the books I work on (and, if I can't put rotations in a single XE field, will be even more common in this project). This page says it's not possible to have such back-links generated automatically, but I'm hoping that that information is incorrect...
  • Are there modestly-priced Word add-ons that can help with manual indexing? I'm not averse to buying extra software to help with issues such as those mentioned above, provided it doesn't cost an arm and a leg. I'm an author, not a professional indexer, and I prepare only one index every few years, so while $100 might be in the budget, $500+ certainly isn't. Note that I'm interested in help with manual indexing, not something that tries to automate the process of creating index entries from list of words or terms. I know from experience that that kind of capability would be of no use in producing the index I want to create.

Thanks for your help with these questions.

Can Not open office apps error code (0xc0000142) windows 8

Posted: 20 Jun 2014 06:22 PM PDT

Today I got the following "the application was unable to start correctly (0xc0000142) Click ok to close the application.

Yesterday when shutting down windows did some automatic updates

I have had no problems with 2013 office until now please help

I did try to go into root and repair but the option is not there only got change/uninstalled acts like the application is broken

Issue with Quick Print and Print menu in Word 2013

Posted: 20 Jun 2014 12:25 PM PDT

Original Title <Printing>

If I print more than 1 copy in Word 2013 from the Print Menu, it is somehow "saving" that number and using it when I try to Quick Print.  However, when I go into the Print Menu, it says only 1 under number of copies.  How do I clear this?

error while reinstall Office 2003 - Microsoft Office forums

error while reinstall Office 2003 - Microsoft Office forums


error while reinstall Office 2003

Posted: 28 Jan 2007 11:16 AM PST

sanhmm

This will happen if the registry contains Microsoft Windows Installer information from an earlier Office installation.

To rectify this issue you will need to run the Windows installer Utility. After try your install of Office 2003

http://support.microsoft.com/kb/290301

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"sanhmm" <microsoft.com> wrote in message news:com... 

Office 2007 Setup Error - Previously Installed Beta Versions

Posted: 28 Jan 2007 08:33 AM PST

There is a KB article. See the link for that on my RTM issues page.

Patrick Schmid [OneNote MVP]
--------------
http://pschmid.net
***
Office 2007 RTM Issues: http://pschmid.net/blog/2006/11/13/80
***
Customize Office 2007: http://pschmid.net/office2007/customize
RibbonCustomizer Add-In: http://pschmid.net/office2007/ribboncustomizer
OneNote 2007: http://pschmid.net/office2007/onenote
***
Subscribe to my Office 2007 blog: http://pschmid.net/blog/feed

"Stephen" <microsoft.com> wrote in message
news:com:
 

How to install the software.. Ie it wont self install, nor unzip

Posted: 27 Jan 2007 04:27 PM PST

Sasha-
Thanks, that worked... ;)

"Sasha" wrote:
 

what is on each of the 4 office 2003 student / teacher discs?

Posted: 27 Jan 2007 03:32 PM PST

How are they labeled?

--

JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375




"dbn" <microsoft.com> wrote in message
news:com... 


2007 Office setup fails during extraction

Posted: 27 Jan 2007 08:56 AM PST

Disable your AV and see if you have a 3rd party firewall program and it's setting that is interfering with your download.

Also check out your Security Setting in IE\Properties\Security

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"James McMurrin" <James microsoft.com> wrote in message news:com... 

Office Professional 2003 - "Limit for Product Key"

Posted: 27 Jan 2007 04:26 AM PST

The Home Use program is part of Software Assurance purchased by your employer. They would be the ones who have control over how many Home Use licenses they are willing to give to any one employee. However, the limit per the SA agreement is only one per employee.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
reading.

After furious head scratching, Sasha asked:

| Sorry, my last message didn't put the message, so I'll try again. I
| asked about this a little earlier, and was told to call MicroSoft
| about it:
| http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.office.misc&mid=c abd3a9e-0cfe-4789-abf9-6273ea8198bc

2007 Office Setup Error

Posted: 27 Jan 2007 04:07 AM PST

good for you - let me know if you bump into any other hurdles - enjoy

"Stephen" wrote:
 

Outlook 2003 startup error

Posted: 26 Jan 2007 05:43 PM PST

Hi neo,

Almost right, MAPI32.DLL was the correct version as it has reloaded. But I
did see MSMAPI32.DLL was still the Outlook 2007 version ie 12. Deleted and
reinstalled, All now ok.

Thanks Klingstin

"neo [mvp outlook]" wrote:
 

Viso for Enterprise Architects vrs. Visio 2007

Posted: 26 Jan 2007 10:56 AM PST

Hi Juan,

There have been a number of changes from the prior Visio product lineup and Visio 2007 :) Visio 2007 is a new release rather than a
different set of features from the prior version.
http://office.microsoft.com/visio

You may want to check with the folks in the Visio discussion group through the link below for specifics, and what the migration plan
is from the Visio Enterpriese Architects version to the 2007 products.

===============
<<"Juan Dent" <nospam> wrote in message news:phx.gbl...
Hi,

I have VS 2005 and thus Visio for Enterprise Arquitects. I also have Visio
2007 and the rest of Office 2007 products.

My question is what are the differences between the 2 Visios and is Visio
2007 is a superset of the other one.

Also, can they be installed side by side and what would one get for doing
that?

Best regards,
Juan >>
--
Please let us know if this has helped,

Bob Buckland ?:-)
MS Office System Products MVP
 

LINKS
A. Specific newsgroup/discussion group mentioned in this message:
news://msnews.microsoft.com/microsoft.public.visio
or via browser:
http://microsoft.com/communities/newsgroups/en-us/?dg=microsoft.public.visio

B. MS Office Community discussion/newsgroups via Web Browser
http://microsoft.com/office/community/en-us/default.mspx
or
Microsoft hosted newsgroups via Outlook Express/newsreader
news://msnews.microsoft.com



Can't get install to run

Posted: 25 Jan 2007 08:11 PM PST

I have finally been able to download the full file: X12-30196. The problem
now is that the file is not a .exe file and won't execute. Is there
something I can do to make it work like rename it to an .exe file?

Any advice would be greatly appreciated.

Thank you in advance.
John

Office 2007 - customizing dialog each time apps open

Posted: 25 Jan 2007 08:46 AM PST

Well for what its worth, I have the same problem, although to be fair I do
have a full install (minus Outlook) of 2003 installed as well.
I posted a couple of weeks back, and apparently its a 'featurette'.

Alex


"Bob Becker" <microsoft.com> wrote in message
news:com... 


Office Professional 2007 install

Posted: 24 Jan 2007 12:35 PM PST

removed the Office Pro 2007 and installed the trial 2007 enterprise version.
the error message went away because the product includes infopath. tried
downloading only the infopath component of enterprsie version to see if
Office Pro would recognize it - no go. its simply a work around ms has to
provide. i suspect its as simple as an installer registry line item that
needs to go away.

"Patrick Schmid [MVP]" wrote:
 

Office 2003 Pro - No Activation Wizard :-(

Posted: 23 Jan 2007 05:52 PM PST

Great news! Thanks for writing back to let us know that you were
successful.

Geoff wrote:
 

how to install from downloaded files

Posted: 23 Jan 2007 03:36 PM PST

I'm not upset. I replied so that you would learn the "proper" way to post.

As for finding responses, most of us who are "hard core" readers of the
newsgroups do not use the Microsoft website for them. That is the most
irritating, slow-loading, and downright user-unfriendly way there is to
read, post, and reply to others. I use Outlook Express, others use a
dedicated reader.

--

JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375




"Buckeye" <microsoft.com> wrote in message
news:com... 


Outlook 2007 co-existance with Office 2003

Posted: 22 Jan 2007 02:34 PM PST

Thanks. Is there a known list of what works and doesn't in this scenerio?

"Patrick Schmid [MVP]" <mvps.org> wrote in message
news:phx.gbl... 

Office 2007 Beta Blocking Install of Office 2007 Trial!

Posted: 21 Jan 2007 11:52 AM PST

Did you check this KB:
http://support.microsoft.com/default.aspx/kb/927222/en-us
In addition to what is written there: In addition to the programs listed
in the KB, this error message could also be caused by the German
Language Pack for Office 2007 and Outlook 2007 add-ins (known ones so
far: Windows Live Local Addin for Outlook, Calendar Printing Assistant
for Outlook 2007).

Patrick Schmid [OneNote MVP]
--------------
http://pschmid.net
***
Office 2007 RTM Issues: http://pschmid.net/blog/2006/11/13/80
Office 2007 Beta 2 Technical Refresh (B2TR):
http://pschmid.net/blog/2006/09/18/43
***
Customize Office 2007: http://pschmid.net/office2007/customize
RibbonCustomizer Add-In: http://pschmid.net/office2007/ribboncustomizer
OneNote 2007: http://pschmid.net/office2007/onenote
***
Subscribe to my Office 2007 blog: http://pschmid.net/blog/feed

"Michael Callahan" <microsoft.com> wrote in
message news:com:
 

One Note- Lost Registration Key

Posted: 21 Jan 2007 07:54 AM PST

If it's installed, try downloading Belarc Advisor.

If not, call Microsoft Customer Service.

http://support.microsoft.com/kb/295539/



--
JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375




"Ms Bookit" <microsoft.com> wrote in message
news:com... 


Install Office 2003 SP2

Posted: 21 Jan 2007 06:35 AM PST

i cant believe no one this..

On Jan 23, 6:28 pm, "mcp" <co.uk> wrote: 

office 2000 missing valid qualifying product

Posted: 21 Jan 2007 04:19 AM PST

no it wasnt an upgrade but i reset the computor and it found whatever it was
looking for. thanks for the help

Uninstalling Office 2007 (BETA) without getting Error 1402

Posted: 20 Jan 2007 03:07 PM PST

Simply rename that file and you will be good to go. Don't bother trying
to delete it after you renamed. Just reboot your computer before
installing the trial.

Patrick Schmid [OneNote MVP]
--------------
http://pschmid.net
***
Office 2007 RTM Issues: http://pschmid.net/blog/2006/11/13/80
Office 2007 Beta 2 Technical Refresh (B2TR):
http://pschmid.net/blog/2006/09/18/43
***
Customize Office 2007: http://pschmid.net/office2007/customize
RibbonCustomizer Add-In: http://pschmid.net/office2007/ribboncustomizer
OneNote 2007: http://pschmid.net/office2007/onenote
***
Subscribe to my Office 2007 blog: http://pschmid.net/blog/feed

"HappyRVers" <microsoft.com> wrote in message
news:com:
 

why isnt my registration key working?

Posted: 20 Jan 2007 01:54 PM PST

Make sure that you use the correct "B" and "8" and "0". The keys do
not use the letter "o".

"al" <microsoft.com> wrote in message
news:com... 


Any problems loading Office 2007?

Posted: 19 Jan 2007 07:21 PM PST

Hi Jeff,

With all of the Office apps closed, use Start=>Search and see if you can locate a file named opa12.dat . If so rename it to
opa12.old, restart the PC then start an Office 2007 app and activate.

============
<<"Jeff" <microsoft.com> wrote in message news:com...
What I did do after my posting was uninstall Outlook 2003 and Word 2003. Both
of the 2007 products then went to a limited live. What I mean by that is I
can load documents into the programs, but I cannot create any new ones.
Outlook and Word are read only. >>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*


Microsoft CRM - Printing Custom reports through MSCRM

Microsoft CRM - Printing Custom reports through MSCRM


Printing Custom reports through MSCRM

Posted: 21 Feb 2005 06:33 PM PST

John,

That seems to be the problem. How do I fix it?

Thanks!

Pekka

"John O'Donnell" wrote:
 

No Account records are available in this view when I go offline

Posted: 21 Feb 2005 05:05 PM PST

John,

I did that and now i'm not able to go offline, i'm getting Error : An unknow
error has occured. Retry....i did retry but it's not working

"John O'Donnell" wrote:
 

Owner assignment problem

Posted: 21 Feb 2005 03:13 PM PST

Yeah, I forgot about the security descriptor until after I thought about the
situation some more. I'm just upset that we came in yesterday morning to
hundreds of opportunities that were reassigned as a result of other users
making simple contact record updates.

So, now I'm working on building a Scribe DTS that will use the same logging
table that the sp was using. Since Scribe uses the CRM API, there should be
no issue, right?

"Matt Parks" <com> wrote in message
news:com... 


Exchange Connector - do I need it?

Posted: 21 Feb 2005 02:13 PM PST

The mail doesn't go through the same mechanism when sending through CRM, it
actually ends up going out through the CRM APIs as opposed to through
Exchange.

There are ways to solve your issue if you want it to work as you spoke, but
they require development to get it done.

Jake

"BradC" <com> wrote in message
news:phx.gbl... 


CRM and SharePoint Integration

Posted: 21 Feb 2005 09:59 AM PST

Dear Shauna,
Our company developed such Component.
I allows to bind any CRM Module to WSS Sites.
Most common mode of work is when User creates new opportunity for example,
system creates new WSS site in predefined template.
Additionally, there is a webpart that shows all created WSS Sites and some
additional info.
Please let me know if you are interested in additional information.

Regards,
Mickey
co.il



"Shauna Koppang" wrote:
 

eResources --> Get Directions in Canada

Posted: 21 Feb 2005 08:15 AM PST

i have been told by microsoft that the eresources stuff is extensible
meaning you should be able to add your own for canada etc however as yet i
have not had the time to investigate a way to do that.

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"Alan Whitehouse" <ca> wrote in message
news:%phx.gbl... 


Sync Phone Calls

Posted: 21 Feb 2005 07:09 AM PST

only task and appointment activities get syned over to the outlook client as
of course outlook only supports these types. This is a pain of course but
make sure your users do not just keep using these types of activities. If
someone needs a popup reminder to appear that they of course need to use
tasks and appointments but for everything else they should use the
appropriate crm activity type

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"robm" <microsoft.com> wrote in message
news:com... 
In 
date, 


Acces denied when trying to access offline data after synchro

Posted: 21 Feb 2005 06:37 AM PST

looks like you and i suffering from the same problem. have you had any luck
trying to get any info on it?
for me....did everything from installation to sync'ing via a vpn connection.
but as soon as you go offline and disconnect and run locally, access denied
msgs on every crm folder. now in the process of first sync...so have another
8hrs to go to complete.

"Richard Fortin" wrote:
 

Creating CRM Users

Posted: 21 Feb 2005 04:22 AM PST

HI,
Thanks for your response. No there are no strange characters, the two
names are John Phillips and Steve McDonagh.

These two users have been added to our pilot CRM system, which is
independent of this live version, with out any problems.

Cheers

Ben

drop down boxes

Posted: 20 Feb 2005 05:09 PM PST

I would think that with 200 values, users will pretty much always fail to
use this drop down correctly.
It's just too many things to sort through.

Have you asked the customer if their might not be a simpler model?
This has "user adoption problem" written all over it.

--
Alex Simons
Director of Program Management
Microsoft CRM
-------------------------
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
"Gill" <com.au> wrote in message
news:com... 


Connecting to CRM Web Client via Wireless

Posted: 19 Feb 2005 07:24 PM PST

The only thing I would check is that you get anywhere on the vpn over the
wireless? We did wireless stuff about a year ago and it was so latent
that we couldnt hold up solid vpn or ssl type connections. Im wondering
if your problem is similar. The vpn may be active but if you are dropping
too many packets it will not work.


"Roger" <com> wrote in
news:phx.gbl:
 


URGENT: Manualy exporting customization

Posted: 19 Feb 2005 02:17 AM PST


I had a similar issue happen to me two different times. The first time I
found under iis6 the crmservice app pool was running on a domain acct
instead of network service account. This resulted in several issues.

The other was actually a problem with Crystal but it kept kicking the
Security Service off. After resolving the crystal issue the security
service functioned.

CRM 1.2 Redeployment problems with Step 5, mapping users

Posted: 18 Feb 2005 01:24 PM PST

Yes, I have the same number of users.....when it
says "same number of users", are we talking about same
number of CRM users or same number of users in active
directory? In the redeployment steps I had to map users
and I made sure I mapped every users that the
redeployment tool said I had to map to, making this a one-
to-one corresondence or mapping users from the old system
into the new system.
I am thinking there might have been some type of tweak
that they might have done with the permissions of the CRM
users created in the sample database...I am using this
sample database to practice this tool prior to using the
real production data to reploy.

Also, if I were to copy over exactly the same domain
(with the same domain controller name), same user names,
exact same SQL databases, I am wondering if you need a
redeployment tool at all? Has anybody tried this? 
available as you had in 
must be at-least 13 
but 
OU, 
the 
call 
statementin 
crystal 
into 
In 
for 
from 
in 
issue 

Invalid User Rights error

Posted: 17 Feb 2005 01:59 PM PST

Well, you could try looking in AD at the users to see if they are still showing
as having memberhip in the AD groups associated with the roles. It's possible
something got out of synch between AD & SQL. On the flipside, you could also
verify that they are given AD group membership when you assign them to a role.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Mon, 21 Feb 2005 15:17:04 -0800, Jim Walsh
<microsoft.com> wrote:

Hey Mark,

Yes, I have tried that. I removed their roles and added them back. I even
changed their roles a bit too, and it does not seem to make a difference.
The same error comes up. We have not changed the Business Unit either. It
has been the same one since the install.

Actually, if I remove all roles from a user, I get a different error message
too. It definitely seems to know the identity of the user within CRM and on
the Domain.

Are you maybe suggesting to create a new BU and add the users with new roles
to see if that makes a difference??

Could it be a SQL permissions issue? I've re-checked the permissions
granted according to the crm installation guide, and all is the way it should
be. I'm just not sure how to troubleshoot this.

Here is the error I get in event veiwer when it occurs:

MSCRM Platform Error Report:
--------------------------------------------------------------------------------------------------------
Error: <description>Invalid user
id.</description><file>d:\crm\build\3297\src\platform\c rmcache\cachemain.cpp</file><line>355</line>

Error Message: Invalid user id.

Error Details: Details on this error have not been provided by the platform.

Source File: d:\crm\build\3297\src\platform\crmcache\cachemain. cpp

Line Number: 355

Stack Trace Info: at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain()
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at
System.Web.CallHandlerExecutionStep.System.Web.Htt pApplication+IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionS tep step, Boolean&
completedSynchronously)

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

The microsoft link does not give any info on it -- typical.

Thx,
Jim



"Matt Parks" wrote:
 

Microsoft Word - Paragraph and Line Issues in Word 2010

Microsoft Word - Paragraph and Line Issues in Word 2010


Paragraph and Line Issues in Word 2010

Posted: 20 Jun 2014 02:43 PM PDT

I have a document with a numbered list.  Section 3.1 is near the lower middle of the page and 3.2 is on the next page.  I have quite a bit of white space below 3.1.  When I click on the paragraph marker to see if there is a section or page break the white space disappears and Section 3.1 goes to the bottom of the page. There are no section or page breaks.  When I unclick on the paragraph marker the white space comes back. 

If I press enter after section 3.1 it will bring 3.2 onto that page, but with extra lines in between 3.1 and 3.2.  When I try to delete the extra lines then section 3.2 goes back to the next page.  My line spacing is 0 points above and 6 points below single spaced for the sections.  On the extra lines it is 12 above and below. I tried to adjust the line spacing to 0 above and 6 below and it sends section 3.2 back to the next page.

Can anyone help me figure out how to get remove the extra lines or white space.

Thank you.

Browse button not working in Word 2013

Posted: 20 Jun 2014 02:38 PM PDT

I have Office 2013 student edition.  If I try to invoke the Browse button anywhere in Word, i.e File Open/Save or modifying directory paths in Options/Save, the button is enabled but does not do anything so I cannot access my computer's file system.

The browse button still works in Excel and PowerPoint.

I don't have any add-ins enabled.

Tried safe mode.

Tried classic.

I have followed the suggestions that were made in 2 similar posts by Remko van Roekel with no success.  Both those threads seemed to end without a resolution.

I need help - Word, of course, is USELESS without the ability to browse.

MS Office 365 Small Business internet connection

Posted: 20 Jun 2014 02:34 PM PDT

What happens with MS Office 365 Small Business if your internet connection goes down - if you have a poor connection?

Images don't stay where I place them - Word 2013

Posted: 20 Jun 2014 12:34 PM PDT

I have several documents that are formatted as a subhead followed by a paragraph.  For some, not all, of the paragraphs, I have a picture that I want to place at the left margin, at the start of the paragraph.  I have the text wrap set to Square, 'move object with text selected.  The anchor symbol is on the line that starts the paragraph.  Sometimes, that works perfectly, and the image stays where it is.  Sometimes it doesn't - I can have the socument set up looking exactly as I want it...then I open it again, and an image has jumped, and no matter how many times I move it to where I want it, and redo all the settings, it jumps - usually above the subhead and to the left edge of the page.  When I drag it to the position I want, I can see the green layout lines...but as soon as I let go of the mouse, it jumps.  

Any ideas?  Thanks!  

Printing

Posted: 20 Jun 2014 12:25 PM PDT

If I print more than 1 copy in Word 2013 from the Print Menu, it is somehow "saving" that number and using it when I try to Quick Print.  However, when I go into the Print Menu, it says only 1 under number of copies.  How do I clear this?

Page Breaks in Word 2013 invisible and change formatting

Posted: 20 Jun 2014 11:54 AM PDT

When I use Control Enter to insert a page break, it has a style applied of 8 pt. after the page break and is left aligned. Then if you start typing after the page break, everything I type will be that same format, which we do not use. When I use the pagebreak icon available to use on the Quick Access Toolbar, it inserts as justified and 0 pt. after the page break. In both instances the page break is invisible unless I am in draft mode with hide/show on. Why did this change? In prior versions, the page break was always visible in draft mode even without show/hide turned on and the page break extended across the entire page. Now it is a short line that is invisible.   

If I try to remove the space after the page break to turn into a long page break as in prior versions, it sometimes does not work and every time it changes my formatting to left aligned with a style applied.  We always use full justification. 

I really need my page breaks to show up. 

Until Microsoft fixes this, I have instructed my assistants to use section breaks and not page breaks. Sections breaks are visible in draft mode without show/hide being turned on and does not change my formatting. 

Can Microsoft please fix this in an update? I know I am not the only one that is having this problem.

Thanks!

Formatting to apply to entire paragraph

Posted: 20 Jun 2014 10:44 AM PDT

Hello and thanks in advance for your help with this. I can't seem to find an answer anywhere--as I am not sure I am clearly explaining my problem.

I have Word 2010. I have a paragraph in which part of the paragraph is bold and part of it is regular font. In the past, when I'd select the entire paragraph and choose "bold" or "ctrl+b", the entire paragraph would change to bold, or regular (and then back if I hit it again).

Now when I select the paragraph it flip-flops. The section that was bold becomes regular, the section that was regular becomes bold.

I know I must have changed a setting somewhere, but I am not sure where.

- I have checked in options and cannot find this as a setting.

- I have changed the text to "normal" - vs. header

- The same thing does not happen when I use italics. It will italicize or un-italicize the entire paragraph, which is what I want.

I also know that this seems like a small thing, but it is something that I need to do quite often. And if it starts happening to other formatting options I'll need to know how to change it.

Thanks!

Doug Robbins' MergeTools issue

Posted: 20 Jun 2014 10:27 AM PDT

I recently downloaded Doug's MergeTools 20140218 in order to use the ManyToOne feature to send invoices to clients.

My excel file has all the field names as alphanumeric, no spaces before the first letter, and no numbers at the beginning of the field.

My header rows are:    Name  /  Email  /  Account Type  /  Account Number  /  Fee Perct  /  Q1 Fee

I have sorted by Name, the field I want as the Key Field.

What I need to happen in the mailmerge is display the name and email of each client at the top of the page, then have a table below with a header row of Account Number, Account Type, Fee %, Quarterly Fee

I've put in each of the merge fields in the locations needed, and put a bookmark named Group in the first cell of the first row of the table.

For clients with multiple account numbers, I need the merge to display all accounts for each client in the same table.

This seems to work great, except for a few problems:

When I run the utility, one of the fields (Quarterly Fee) shows the error "no document variable supplied" for every entry. That's one of the most important child fields I need to include, so that must be able to view correctly.

The last issue I have is my total row is not summing the column, instead showing "!D4 Is Not In Table." It is formatted as { =SUM(ABOVE) \# $,#0.00 }

Hopefully somebody can help!

Thank you,

Ryan

Word 2013 Erroneously and spontaneously Translates Entire Document to Foreign Language!

Posted: 20 Jun 2014 09:55 AM PDT

I have been using Word 2013 for about  6 months. All ok. But yesterday, as I was working on a 112 page document,  I apparently hit  the wrong combination of keys, and immediately, the entire  document was turned into  a foreign language – maybe Greek!!!. I have been working with one form of  Word  for over 30 years. This has never happened to me before. I have never used the Translation app.  I tried to use this app to  get the document to go back to English – but each time it  fails to go back to English.    How can I get my original document back and how can I prevent this from happening again??? I am a writer and I am terrified that this will happen again! Please help!

How to remove the time only from every cell selected in a table in Word

Posted: 20 Jun 2014 09:18 AM PDT

I want to remove or delete the typed time from every cell I select in a Word table.

Thanks

How to divide 2 document property quick parts in one document by section

Posted: 20 Jun 2014 08:57 AM PDT

I have 2 status metadata quick parts in a document that need to contain different values. However, when I change one, it changes the other to the same value. How can I split these up so that I can put different values into the same type of quick part on within the same document?

Hidden Captions and Un-selectable Captions

Posted: 20 Jun 2014 08:51 AM PDT

hello,

I am writing a manual, and I have about 50 images in my file that I wish to have documented in a table of figures. Constructing the table is no problem. Even the first 40 or so captions work perfect and display correctly in the table. Then all of the sudden there is a problem. 

I have caption in the table "Caption 44" That does not belong to an object. If I follow the link in the table, it takes me no where. I realize I can simply delete it from the table, but every time I update, I'll need to do this. The caption 44 problem arose when Word decided that all images after the 43rd we're going to labelled as "Caption 44". 

Furthermore, some captions appear as text boxes, and they can moved around, while some are text like the rest of my document. What causes this inconsistency?

Finally, there is a caption that I can see that is not included in the table. I cannot select it, word doesn't seem to know it exists. My goal would be to re-number or update this caption because it is currently out of order. 

Thank you very much for our help, I truly appreciate it. 

Joel

Is it possible to specifically define a collapsible endpoint?

Posted: 20 Jun 2014 08:44 AM PDT

I've been hunting the web for answers to this and have not found anything of genuine help. I'm trying to create a sub-section of a parent section that collapses the code samples so they don't clutter the readable portion of the document -- something akin to the "spoiler" sections inside a forum post.

Here's the layout for visual reference:

1) HEADER1

Text explaining this section and the purpose of the code.

a) SUBHEADER1

Code sample for SUBHEADER1

b) SUBHEADER2

Code sample for SUBHEADER2

Text wrapping up the section with additional notes.

2) HEADER2

Same structure as above.

3) HEADER3

And so on.

Now using the header styles this mostly works nicely, except for one problem: SUBHEADER2 seeks to include everything up to the next header in its collapse field. So the wrap-up text illustrated above also hides when collapsing SUBHEADER2. Functionally speaking this means that if you collapse the code sample from SUBHEADER2, you don't get to see the additional notes that follow-up the code sample.

This order of readability is very important for the doc I'm creating, so I can't accept the current behavior. Is there a way to manually set a header style's collapsible endpoint? Can I force Word to collapse only the code sample under SUBHEADER2?

Or is there another way I should be going about this?

Thanks in advance!

Word 2013

Posted: 20 Jun 2014 07:39 AM PDT

 How do you change the font and size on the blank worksheet so when you open a new worksheet it is the default font and size? It is easily changed in "Excel" by selecting options. The options page in "Word" does not have this option.

Removing carriage return in Word Mail Merge

Posted: 20 Jun 2014 07:30 AM PDT

I am trying to create a table using mail merge. Each row of the table is created by a different set if/then/else statements. I am unable to remove the carriage return between the rows. Can someone please tell me how to remove the carriage returns? I can not simply delete the carriage returns. They are fixed!


Below is my mail merge code (in Word 2010)

Below is my Excel file that I'm merging with the Word doc.

T1_First_Name T1_Last_Name T1_XYX T2_First_Name T2_Last_Name T2_XYX T3_First_Name T3_Last_Name T3_XYX T4_First_Name T4_Last_Name T4_XYX
Fred Flinstone grp4 Wilma Flinstone grp3 Pebbles Flinstone grp4 Dino Flinstone grp5
Barney Rubble grp2 Betty Rubble grp4 BamBam Rubble grp1      
Betty Green grp5                  

Below is what the merged file looks like in preview

Below is preview with formatting ON

How do I reformat so there are no spaces in between the rows???

Error Message When Trying to Save Template

Posted: 20 Jun 2014 07:20 AM PDT

Hi,

I was trying to save a template by navigating to C:\Program Files\Microsoft Office\Templates. I had done this very same thing recently with no problem.

However, this time I got this error message:

-------------------------------------------------------------

C:\Program Files\Microsoft Office\Templates\[file name]

You don't have permission to save in this location.

Contact the administrator to obtain permission.

Would you like to save in the Documents folder instead?

--------------------------------------------------------------

I am the administrator! I double-checked the Control Panel to be sure that I am still showing as the administrator, and I am.

Please help!

Thanks.

Kath

Field Codes

Posted: 20 Jun 2014 07:10 AM PDT

Hi,

I am creating a table in word in the following layout...

 --------------------------------------------------------------------------------------------------------

| Programmer Name |   Channel   |     Date     |  Start Time  |   End Time   |    Length    |   Watched  |

 --------------------------------------------------------------------------------------------------------

| Plain Text      | Plain  Text | Field Code 1 | Field Code 2 | Field Code 3 | Field Code 4 | Plain Text |

 --------------------------------------------------------------------------------------------------------

The following Field Codes are what I need:

Field Code 1: {QUOTE "dd/mm/yy" \@ "d MMMM YYYY" } Displays "20 June 2014"

Would Like to Display "20th June 2014" and if possible the "th" will be SuperScript.

Field Code 2: {QUOTE "hh:mm" \@ "h:mmam/pm" } Displays "12:00pm"

This is what I want

Field Code 3: {QUOTE "hh:mm" \@ "h:mmam/pm" } Displays "12:00pm"

This is what I want

Field Code 4: What I want is to find the Length of Time between Field Codes 2 and 3 in the format of "2h 05m"

(Please note may need to go between 2 days i.e. 11:00pm to 1:05am)

Thanks in advance,

Neil

Losing space on MS Word with different version

Posted: 20 Jun 2014 06:28 AM PDT

Hi. 

I have 2 versions of MS Word: Word 2010 and Word 2007 in 2 different place: a PC and a laptop.

Here is the example of what I often got:

 

In Word 2010, I wrote this: "This is just for an example to show what's wrong with this Word." 

Then I saved it in a flash disk, and I opened it in Word 2007.

and when I opened that file in Word 2007, this is what I saw: "This isjustfor anexample to showwhat's wrong with this Word." 

as you can see, there are some "space" that went missing. This thing drove me crazy because then I have to re-read and re-edit my whole document. If it just a page, then it's okay. But when the document reach 20 pages or so? nightmare.

Do you have any suggestion on what I should do to prevent this from happening?

thanks before.

daisy

Formatting problems with Tables in Word after Latest Word Update Installed (KB2880529)

Posted: 20 Jun 2014 06:10 AM PDT

A number of tables in my word documents are no longer formatted correcting.  The alignment of columns is off and the formatting of text in the cells has changed.  The occurred immediately following the install of Word Update KB2880529 on Tuesday, June 16, 2014.  I uninstalled the update and the tables are back to normal.  I reinstalled the update and the tables are messed up again.  I'm not able to find any similar reports of this problem.  I did find a link on Google when searching for this problem but the post had been deleted on the Microsoft Tech Forum.

Please help because this is a major problem for me in my work and it is impacting a large number of documents and people!

Thanks!

Spell checking comments

Posted: 20 Jun 2014 04:44 AM PDT

Can anyone tell me how to spell check comments in comment balloons? I can spell check the document itself but not the comments. I am using Word 2010

how to choose a substitution font in a word template 2013

Posted: 20 Jun 2014 04:37 AM PDT

Hello,

We have a couple of templates with a Din ot font.

Once a computer does not have this font it takes a substitution font that is very difficult to read and not corporate at all (see screenshot):

Is there a way to choose the substitution font (we'd love to have Arial in this case)?

Thank you for any help,

E.

I need to repair word(.doc) file. ASAP.

Posted: 20 Jun 2014 03:27 AM PDT

I am using MS Word 2007 from last 2 years and maintain my all documents in Docx format. However, it has been corrupted due to bug issue in MS Word. Please guide me how to get back my crucial data as soon as possible.

word 2013 not works

Posted: 20 Jun 2014 03:24 AM PDT

Hi I have a problem. I have reinstall the office  home and student 2013. the excel works excellent but the word is till not responding. it says word has run into an error and that is preventing it from working correctly. Word will need to be closed as a result. Would you like to repair now? When I chose repair now nothing happens? the other options are close, help.i try so many times ,but only word not works,which is very urgent for me.help me DEVINDER SINGH

Office 2013 - Can't save files due to "affecting the Global Template Normal"

Posted: 20 Jun 2014 02:28 AM PDT

Hi all,

As the title states, I'm working on behalf of a client and I literally have no ideas on what to do next from here!

I have tried the following:

Ran MalwareBytes

Ran ADWCleaner (This found 1 virus and stopped Cursor flickering)

Created a new Normal.dotm

Ran a quick repair on Office 2013

Ran an Online repair on Office 2013

Installed a Hotfix for the printer spooler not stopping when printer wasn't active.

Now he accesses the file from their server at the workplace which only he has access to, when he goes to save the document it says *like stated in the title* That saving this file will affect the Global Template Normal, I told him to OK it and see where it goes from there and it now gives another error message stating this

"We can't save this file because it's read-only.

To keep your changes, you'll need to save the document with a new name or a different location."

<Directory here>

Any help will be greatly appreciated!

Thanks in advance!

Is MS WordArt available in theOffice Word 365?

Posted: 19 Jun 2014 08:24 PM PDT

Has anyone used the MS Office 365 Word? Does it have the WordArt feature?

why cannot I use UNC path includes some special character?

Posted: 19 Jun 2014 05:59 PM PDT

I have used Office 2013.

when I use UNC path includes some special character such as '▶', MS Word and Outlook do not create a hyperlink for the path automatically. but Excel create the hyperlink automatically. 


Also If the UNC path include another special character( ★, ●, etc..), MS office(excel, word, outlook) create the hyperlink.

So If some one know about the reason, please let me know