Pages

Search

Microsoft Word - Text boxes in a Word 2007 table shift

Microsoft Word - Text boxes in a Word 2007 table shift

Text boxes in a Word 2007 table shift

Posted: 31 Dec 2014 12:42 PM PST

I have a table which is laid out to use as a job application. I used text boxes in the different sections to input my personal information.

What I've run into is: when I print it or convert it to a .pdf document, a few, but not most, of the text box information is shifting down.

I've adjusted those text boxes in the Word document to be correctly located, but still when printed or converted to .pdf, those text boxes are still shown as shifted down.

Oh, also it happens when I convert the Word document to a .xps document.

Why are only those specific text boxes doing that and how can I fix it?

Another question: I have legal copies of both Office 2007 as well as Office 2010, would it make any difference to use Word 2010 instead?

Office 2010 Printing off center

Posted: 31 Dec 2014 12:31 PM PST

All of a sudden my Word documents are printing off center, any ideas on how to fix this? All other programs are printing correctly and I do not know why it all of a sudden changed. 

is there a way to edit existing caption label?

Posted: 31 Dec 2014 12:19 PM PST

from reference> insert caption

i would like to edit some caption label
how can i do this?
automatically

ViewZoom200 sets view mode to "Draft". Want "Print" mode

Posted: 31 Dec 2014 10:30 AM PST

In Word 2013, the ViewZoom200 command switched the view mode to draft. Is there a way to keep it in the print view mode? (Other than fiddling with the zoom slider?)

I'm looking for a one-click solution to get 200% magnification in print mode. (I used to use page width, but the resolution on my new computer blows that up way to big...)

Thanks.

Ken

Too Many Clicks to Open a Document in Word and Excel 2013

Posted: 31 Dec 2014 10:03 AM PST

In Word and Excel 2010, I could click the Open icon in the Quick Access Toolbar and the "Open" navigation window would open, enabling me to go directly where I needed.  All of 2 clicks.

In Word and Excel 2013, it now takes 4 clicks just to get to that "Open" navigation window.  I have to now:

  1. Click the Open icon in the Quick Access Toolbar.
  2. It looks like the File tab opens, and I have to click the Computer icon.
  3. Click the Browse button.

Sure, it's only one more click, but it's annoying.  Is there any way to go directly to the "Open" navigation window?

Also, it appears they took away the "Resent" command from the Quick Access Toolbar.  Again, it's now only 1 more click, but annoying.

Thanks for any help you can provide.

want to send email from MS word with hyperlink one pdf file and excel file

Posted: 31 Dec 2014 08:53 AM PST

i have create one MS word file in office 10,  now I want to add one pdf file and one excel file in hyperlink and want to send it to other. how can I do this. How can other person view the pdf and excel file.

How can I move text in a text box in front of the background/fill of a text box?

Posted: 31 Dec 2014 08:52 AM PST

I created a text box, but the background/fill of the text box is covering and hiding the text in the text box.  How can I move the text in front of the background/fill of the text box?

Styles Window Doesn't Snap in Position in Word 2013

Posted: 31 Dec 2014 08:40 AM PST

In Word 2010, the Styles window would snap into position to the side of the main document work area (like the Navigation pane still does).   This was great, because it automatically resized itself and the document work area horizontally so that they both fit on the screen.  Does that make sense?

It no longer does this.  Instead, it floats over top of everything else. 

Was this feature removed in Word 2013?

THANKS!

Sorting problem A1 A10 A2

Posted: 31 Dec 2014 08:03 AM PST

Hello,

Here's my sorting issue. Using MS Word 2010, we often work with simple tables with several columns. One column we have contains patient room numbers. We need to sort those room numbers, but instead of getting this order: A1, A2, A10, etc., we get this order: A1, A10, A2, etc. I understand how to sort but choosing the numbers sorting does not work since there is a letter before each number. How can I sort the  numbers properly when there is a letter just before each number? Thanks!

Ron

Adding page numbers in footer with jpg

Posted: 31 Dec 2014 07:59 AM PST

I have a jpg image in my footer and would also like to add page numbers to my document. Whenever I do this, it deletes the image. Is there a way to keep the image but also add page numbers?

Installation language - Office

Posted: 31 Dec 2014 06:38 AM PST

When I installed Office Home & Student 2013 the wrong language was requested. I have uninstalled it now but when I tried to re install it came up with the same language with no options to change it.

No Spacing style removes formatting and other styles

Posted: 31 Dec 2014 06:19 AM PST

I like to use the No Spacing style at the start of a document because it changes line spacing to single and spacing before and after paragraphs to 0 pts. much similar to the old Word 2003 defaults. However, if I have already typed a document, press CTRL+A, and click No Spacing from the Styles gallery, any alignment I used in the document, such as centering a line, and any styles I used in the document, such as Heading 1 or 2 styles, are removed. If I applied manual formatting, such as bold and font color, that formatting is unaffected.

Why does No Spacing style remove other styles rather than simply changing line spacing and spacing before/after paragraphs? Is there a way to have No Spacing change only line spacing and spacing before/after paragraphs? Thanks in advance.

Cannot make Print Layout view use the facing/mirror page layout even when "zoomed" to multiple pages

Posted: 31 Dec 2014 06:02 AM PST

I am using Office 365 (Personal) Word.

I am working on a book/brochure type document and want to view it as it would be printed or read while I edit it.

I have set the page layout (margins) to use mirroring.  Neither "Print Layout" nor "Read Mode" respect the page layout I have chosen.  I cannot find where to make the view behave correctly.  Selecting the "zoom" for "multiple pages" doesn't work and there doesn't seem to be any other related options.  Having a search function for the commands list on the customisation ribbon dialog would be helpful.

The only way to see the document in a print layout, as it should be printed, is via the print preview.  I will have to continuously check the print preview to be sure that my layout is correct.  I can't split the view and use the print preview there, either.

It seems like a logical enough thing to me, that "Print Layout" and "Multiple Pages" should respect the page layout for facing/mirrored pages.  OpenOffice and LibreOffice do it and very likely every other word processor in the wild.  I'm almost certain Word used to do it, too but I can't be entirely certain.

How can I make the view behave correctly?

Daniel.

Help me stop the many steps to opening a document

Posted: 31 Dec 2014 05:41 AM PST

When I want to open Microsoft Office Word (2007), and click on it's icon, I get a permissions box titled User Account Control, asking me if I want to allow the following program to make changes to my computer? The program is Microsoft Corporation. If I click NO - word does not open. If I click yes, Word opens a blank document.

If I begin this process from my documents; several other steps are required to open the file I want. From My Documents, I click the file I want to open. The same User Account Control box opens, asking me if I want to allow Microsoft Corporation to make changes to my computer. If I click No - the file will not open. If I click yes, I get a message from C:\\****\documents\**** (personal info displays where I have entered the spacers). Another box opens with a large red X saying there is a problem sending the command to the program - however the document continues to TRY to open - only displaying as a blue document with no print. I then have to go again to the Office button, click on the file I want opened to FINALLY get the file to open.

Do I have a permissions problem, and sync problem, a download problem? Please, this is frustrating and I need help.

 

Hindi Numbers in 2007 Office

Posted: 31 Dec 2014 02:45 AM PST

Hi, My office is 2007 and I'm unable to write Hindi numbers although I write Arabic without any problem. The options of right-to-left language are not even enabled in Word Options Menu. When I tried online Help, It just says that these options are not enabled because you don't have right-to-left language enabled for text editing. Anyone can help on this please?

balance a centered paragraph

Posted: 31 Dec 2014 02:34 AM PST

If I center a paragraph, the last line may be much smaller than the other lines. Is there a way to somehow automatically balance the lines, to make sure they all have pretty much the same length? Thanks!

Microsoft Word 2003 Czech Proof

Posted: 30 Dec 2014 11:02 PM PST

I am experiencing an interesting problem with Word 2003.

Background:

Previously used MSWorks 4.0 Czech version and Word 2003 English version on a Windows 7 platform.

Word 2003 was able to identify and use MSworks dictionary and therefore allow Czech language spell checking.

New installation:

Windows 8. MSWorks 4.0 does not work (incompatible).

Word 2003 is fully functional with no issues.

Copying the Czech dictionary across does not work.

Installing the Microsoft Czech Grammar checker : https://www.microsoft.com/en-us/download/details.aspx?id=13457 shows this is installed (no errors) but  does not identify the Czech language or dictionary.

Any ideas of how to work around this problem

The user is a mildly disabled 74 year old who struggles with change and would prefer to continue using Word 2003 as long as possible.

Opening MS Office 2007 Word documents.

Posted: 30 Dec 2014 10:29 PM PST

When I try to open a Word document from the Recent Items list I get the message "There was a problem sending the command to the program." When I click on OK a second error message is received saying " Wordpad can't open this document. This document is either corrupt or protected under Rights Management."

After I click OK and close the window I can then open the document without any error messages being received.

I have been opening this document every day for the last year without difficulty. The problem started after the last Window's Update. Does anyone know how to cure the problem?

How do I cause a Word 2003 table disappear if a bookmark in the table has nothing in it.

Posted: 30 Dec 2014 03:28 PM PST

I have  to deal with Word 2003 documents created from customized document templates. I have complete control over the templates, so I can make any  changes to them that I need to achieve my goal.

Here is my problem:

I have tables with (usually) two rows in them. The first row contains static text defined in the document template that is used to create the document - it never changes. It usually consists of one cell, but some tables may have more than one cell in the first row. The first row is set with a background color to make it visibly distinct from the other rows.

The second row is always one cell, and contains a single bookmark. Any text that goes into this cell is put inside the bookmark. Sometimes this bookmark has nothing in it, and that is the important point.

Sometimes a third row appears.

What I need to do is to make the entire table disappear from the printout of the document if the bookmark in the second row has nothing in it.

A variation would be to make the table disappear if the bookmark contains a specific text string.

The table must have visible borders when it is visible.

This looks like a job for a VB macro that controls font visibility setting for the table.  I wrote a lot of VB 6 code at one time, but I am not very familiar with the details of the objects and functions that are used for Word macros, but I will be able to use and modify a good example.

Problem: Samba won't start because of Vmware - Forums Linux

Problem: Samba won't start because of Vmware - Forums Linux

Problem: Samba won't start because of Vmware

Posted: 26 Aug 2008 07:21 PM PDT

Bill Mar wrote: 


Hmm, I didn't think of that. I will check the docs some more and see if
there's a way to recreate the links.

Thanks for the input.


--
_____________________
CRC
sbcglobal.net
SuSE 10.3 Linux 2.6.22.17

Mandriva 2008

Posted: 24 Aug 2008 07:15 PM PDT

Raj. schrieb: 

I encountered similar problems with a different (Ralink) card, that
works fine under Windows. In addition to a very poor data rate,
disconnects and so on, my system tended to crash every now and then. It
seems to be a driver problem, at least all the problems disappeared
after I disabled the wireless device and connected my router by wire.

DoDi

iSCSI performance, vs. NFS, versus rsync

Posted: 22 Aug 2008 03:16 PM PDT

Chris Cox wrote: 

*THANKS*. That's what I needed.


 

(win)grub

Posted: 18 Aug 2008 06:51 AM PDT

On Aug 18, 6:43pm, Douglas Mayne <localnet> wrote: 

yes, booting windows (XP) is not a problem. I decided to use wingrub
so that MBR would stay intact.
but booting Solaris is a problem. I did, however, manage to boot into
it by typing commands in grub console.
the Windows (SATA) HDD is set as primary in bios.

here is how it should look:

NTLDR MBR on SATA: xp|wingrub
wingrub: chainload Solaris grub


so, the problematic wingrubs menu.lst should contain only one entry
(for now) and that is "chainload
Solaris"

hardening Linux

Posted: 17 Aug 2008 11:55 PM PDT

Nico Kadel-Garcia wrote: 

The *simple* answer is don't install things you don't need, like "Do you
really need gcc on an Internet-facing web server?" Actually figuring
out what you don't need can be a challenge.

SANS (www.sans.org) is an organization devoted to secure system and
network administration. It has an extensive reading room of contributed
materials, which are free. It also *sells* a pdf on hardening Linux
step-by-step, which may be a bit out of date by now, although they do
update it from time to time. Note that SANS is *not* Linux-specific.
You'll find stuff there on Windows, Cisco, etc., too.

There's Bastille (aka Bastille-Linux.org or Bastille-UNIX.org). It's a
set of scripts that will either do a bunch of stuff to harden your box
or just run a report to tell you what it would do if you let it. I
recommend the second option. It doesn't work on every distro, though.

There's Armor (www.spitzner.net/armoring.html) and Titan (which became
Sun JASS), which are for Sun Solaris and are kind of old by now, but the
ideas still apply.

Then there's SELinux, on which folks have already commented. It keeps
processes from doing things they're not allowed to do, even if they're
running as root. I think it's actually become quite usable under
Fedora. YMMV on other distros. It's definitely not for beginners, but
you don't have to be a 10-dimensional chess grand master in your spare
time, either.

How do you use Emacs to sort RMAIL email based on SpamAssassinheaders?...

Posted: 17 Aug 2008 05:50 AM PDT

the zak wrote: 
 

Such as Gnus, which runs under Emacs and does much more than Rmail ever
did. It can easily do the sorting you want. Sample .gnus entry:

(setq nnmail-split-methods
'(("spam" "^X-Spam-Flag: YES\\|^X-Spam-Score:")
("debian-announce" "^X-Mailing-List: <debian.org>")
("debian-user" "^X-Mailing-List: <debian.org>")
("debian-devel" "^X-Mailing-List: <debian.org>")
("debian-changes" "^X-Mailing-List: <debian.org>")
("debian-devel-announce" "^X-Mailing-List: <debian.org>")
("debian-amd64" "^X-Mailing-List: <debian.org>")))


I use Mailagent to presort our mail, deleting high-scoring spam.
--
John Hasler
gt.org
Dancing Horse Hill
Elmwood, WI USA

How do ya install programs on Ubuntu without a internet connection?

Posted: 15 Aug 2008 09:13 PM PDT

The Natural Philosopher wrote: 

USB wireless network devices are pretty cheap.

New video card.

Posted: 14 Aug 2008 06:02 AM PDT

On Aug 14, 10:06 am, Bill Mar <net> wrote: 

I needed higher resolution because this indirectly controls the
dimensions of the virtual desktop.
You are right. I plugged the thing in and it worked. I got 4 out of
the 5 resolutions I asked for in xorg.conf.

Thanks for responding.

remote installation

Posted: 13 Aug 2008 02:17 AM PDT

On Aug 13, 7:27pm, Allen Kistler <moc> wrote: 

ubuntu 8.04

Dual boot, WIN2K won't boot.

Posted: 10 Aug 2008 12:19 AM PDT


"sridhar" <com> wrote in message
news:googlegroups.com... 
news:googlegroups.com... 


But still not a bad precaution.

I generally find win2k corrupted registries are cause by RAM or HD problems

before you do a lot of trouble-shooting it's good to confirm that your
hardware is OK

Son's computer crash, need some YD help-he leaves in 5 hours.

Posted: 09 Aug 2008 06:27 AM PDT

On Sun, 10 Aug 2008 05:39:29 -0400, Andrew Halliwell
<sky.com> wrote:
 


Yes, I got 1 reply and sent it to my son, awaiting news from him.

GK

Gannt bars visible in Legend Microsoft Project

Gannt bars visible in Legend Microsoft Project

Gannt bars visible in Legend

Posted: 05 Jan 2006 05:56 AM PST

Hi Helge Svee,

See FAQ #33 "What the Gantt Chart Legend Shows" at:
http://project.mvps.org/faqs.htm

Hope this helps. Let us know how you get along.

Julie
"Helge Svee" <Helge microsoft.com> wrote in message
news:com... 

cost rollup

Posted: 04 Jan 2006 04:14 PM PST

Hi Peter

I've just set up a project file (ver 2000) using the information you
provided and my 3rd column sums up to the summary task immediately that the
data is entered in either the first or second column.

i used a number column for column 1 and cost columns for 2 & 3 - is this
what you did also?
failing that what version of project are you using? have you got the latest
service packs on it?

--
Cheers
JulieD


julied_ng at hctsReMoVeThIs dot net dot au


"peter versluys" wrote:
 

Unassigned Resources in resource usage

Posted: 04 Jan 2006 10:08 AM PST

OK, I've traced them to one project;
the unassigned tasks have no resources or hours given to them, yet they
tally in "Resource Usage"; but not in the "View...Reports".

Other that rebuilding this schedule; any thoughts?

"Jan De Messemaeker" wrote:
 

CC Status Reports

Posted: 04 Jan 2006 08:42 AM PST

No problem - good luck :-)

Mike Glen
MS Project MVP



"Robert" <microsoft.com> wrote in message
news:com... 

Can you put in just dates, not lengths?

Posted: 04 Jan 2006 08:30 AM PST

And for my two cents it sounds like you have a re-occuring task that takes
place very Monday from 9:00 - 12:00. You can put in a reoccuring task with
those parameters and I think that will give you what you want. It will not
move unless you put in dependencies since you will say it starts on Monday
and once a week on Monday for a duration of 3 hours. Sort of what we do with
scheduled project meeting where we schedule them for each week at the same
time for the same people for the same length of time.

Hope this helps.


--
Jim Reid, PMP


"Jan De Messemaeker" wrote:
 

Custom list for filters

Posted: 04 Jan 2006 08:20 AM PST

Thanks, I'll try that.

"Jan De Messemaeker" wrote:
 

calendar updates

Posted: 04 Jan 2006 08:14 AM PST

Hi,

The macro in the "Article on MS Project" in my website may inspire you.
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"John Mac" <net> schreef in bericht
news:googlegroups.com... 

Project not holding format changes

Posted: 04 Jan 2006 07:18 AM PST

Jim --

It sounds like your Project Server administrator deleted the Enterprise
Gantt Chart view from the Enterprise Global file. The Enteprrise Gantt
Chart view is the only default enterprise View that ships with Project
Server 2002 and 2003. Because it is an enterprise View, users cannot modify
the Enterprise Gantt Chart view in any way. This is how an organization can
distribute a "corporate" View to everyone in the organization.

On the other hand, Views like the Gantt Chart, Resource Sheet, Tracking
Gantt, Task Usage, and Resource Usage views are all local Views that are
stored in each user's Global.mpt file on his/her hard drive. These Views
are totally customizable. If the PM in question applies one of these local
Views, he/she should be able to customize it and have the changes stick.

Therefore, I think there are several things you can try to solve this
problem:

1. Go to the PC of the PM in question and open his/her project. Try
applying several different Views and determine if you can customize the View
and have the changes stick. If not, note what Views are causing the
problem.

2. Talk to your Project Server administrator and determine what he/she has
done with the Enterprise Gantt Chart view and why. Also, determine if
he/she has made any of the local Views (such as the Gantt Chart or Resource
Sheet) into enterprise Views, which he/she should NOT do.

Let us know if we can help any more.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We wrote the book on Project Server"


"Jim Reid" <net> wrote in message
news:com... 

Creating S curve graph with days management

Posted: 04 Jan 2006 06:13 AM PST

Then you have to assign manhour on your activities, and eg use excel for
displaying the curves.

BUT the best way of managing project with MSP is to buy an add on software
from SAFRAN call Safran for MSP. It works and I have used it in several
projects. Contact them at www.safran.no

com skrev:
 

Will Project Work For Us?

Posted: 04 Jan 2006 05:52 AM PST


John Sitka wrote: 

Ok, I see how you interpreted it now. I took that line to mean, "If
it's in the past, don't track it anymore". 

Help! Will Project work for this application?

Posted: 03 Jan 2006 03:11 PM PST

Steve, I disagree with Rod MSP is ideal for this situation. You would need
to know the number of man hours/days to complete a task and if the task if
set to "Fixed Duration" it will calculate the number of resources you need to
complete that task. I don't know if you could do that in Excel or not but I
know you can do it in MSP.


--
Jim Reid, PMP


"steve" wrote:
 

How do I make the color of my task name conditional?

Posted: 03 Jan 2006 02:32 PM PST

In Format, Text Styles there is a style called "Marked Tasks" and there is a
Field/Column that you can insert to go with it.
It is only Yes/No and there is only one.
There is also a Text Style for Highlighted Tasks, which are Tasks which are
found by a Filter, so if you filter on your criteria.
Again a bit limited because you want 3 criteria and 3 colours and with the
filter the Task is either filtered in or filtered out.

If you Mark for one of your criteria and filter/highlight for another, and
set styles accordingly, then all other Tasks must meet the last Criteria.

"CBland" <microsoft.com> wrote in message
news:com... 

MSProject Macro problems

Posted: 03 Jan 2006 12:30 PM PST

yes sure :) my mistake not Office 2003 but Project 2003

"Jan De Messemaeker" <jandemes at prom hyphen ade dot be> wrote in message
news:phx.gbl... 

Microsoft CRM - Syncing All Contacts

Microsoft CRM - Syncing All Contacts

Syncing All Contacts

Posted: 15 Aug 2005 02:34 PM PDT

With contacts on the SFO client, it will import all contacts that the
user has security rights to view. The other two import options for
tasks and appointments will be based on ownership.

Reporting Question - aka I hate Crystal Reports

Posted: 15 Aug 2005 11:23 AM PDT

appears this is caused by iton not being setup correctly
===========================
You have redeployed Microsoft Business Solutions CRM 1.2 by using the
Redeployment Tool. You try to add a new custom field to Microsoft CRM by
using the Schema Manager in Microsoft CRM Deployment Manager. The custom
field is not added, and you receive the following error message:
dmLog: sp_repladdcolumn failed - Schema tion failed because database
'<Organization_Name_MSCRM>' on server '<CRMServerName>' is not the original
Publisher of table '<TableName>'
CAUSE
Microsoft SQL Server tion is not configured correctly for the
Microsoft CRM databases.
RESOLUTION
Configure SQL Server tion correctly for the Microsoft CRM databases.

For more information, click the following article number to view the article
in the Microsoft Knowledge Base:
872585 How to re-create tion and enable publishing for Microsoft CRM
Sales for Outlook when offline synchronization fails
If you have Microsoft CRM Sales for Outlook clients installed that are using
this Microsoft CRM server, follow all the steps that are listed in Microsoft
Knowledge Base article 872585.
================================================== ===
here is article 872585

How to re-create tion and enable publishing for Microsoft CRM Sales
for Outlook when offline synchronization fails
View products that this article applies to.
Article ID : 872585
Last Review : 2005-08-05
Revision : 4.3

On This Page
TechKnowledge Content
Summary
More information
APPLIES TO
HOTFIX DOWNLOAD

TechKnowledge Content
Summary
This article describes how to re-create tion and to enable publishing
on the Microsoft SQL Server, where the Microsoft Business Solutions CRM
databases reside, after the Microsoft CRM Sales for Outlook client has
failed its initial synchronization. You may receive the following error
messages during the synchronization process:
An error has occurred. For more information please contact your system
administrator.
An unknown error has occurred. Retry the action. If the problem persists,
contact your system administrator.
Back to the top

More information
To disable publishing and to manually re-create tion for Microsoft
CRM when Outlook clients cannot synchronize successfully, follow these
steps: 1. On the Microsoft SQL Server where the Microsoft CRM databases
reside, click Start, point to All Programs, point to Microsoft SQL Server,
and then click Enterprise Manager.
2. In Enterprise Manager, expand Microsoft SQL Servers, expand SQL
Server Group, expand your Microsoft CRM SQL Server, right-click the
tion folder, and then click Disable Publishing. To disable
publishing, follow the instructions that appear on the screen.
3. After you have disabled publishing, run the following SQL script
against the Organization_Name_MSCRM database to remove old tion
system objects, where Organization_Name is the licensed company name. Follow
these steps to run the script: a. On the SQL Server where the Microsoft CRM
databases reside, click Start, point to All Programs, point to Microsoft SQL
Server, and then click Query yzer.
b. In Query yzer, change the database list so that the
Organization_Name_MSCRM database is selected.
c. Click the following link for the SQL script, and then copy
and paste the script into Query yzer.

http://mbs.microsoft.com/downloads/public/KnowledgeBase/KB872585.txt
d. Click the Query menu, and then click Execute.

4. You can now re-create tion. Follow these steps: a. On the
Microsoft CRM Server, click Start, point to All Programs, point to Microsoft
CRM, and then click Deployment Manager.
b. In Deployment Manager, click Server Manager. In the right
window of Server Manager, right-click Microsoft CRM Server, and then select
Configure SQL Server.
c. Click Next, and then click Finish to configure the Microsoft
SQL Server for tion.


5. Reopen Microsoft SQL Enterprise Manager.
6. Click Start, point to All Programs, point to Microsoft SQL Server,
and then click Enterprise Manager.
7. Expand Microsoft SQL Servers, expand SQL Server Group, expand
Microsoft CRM SQL Server, and then expand tion Monitor.
8. Expand Publishers, and then expand your SQL Server Name, where you
will find the CRMMetaPub and the CRMPub publications.
9. Click CRMMetaPub, and then right-click Snapshot in the right window
pane.
10. Click Start Agent.
11. Click CRMPub, and then right-click Snapshot in the right window
pane. Click Start Agent.

Note The snapshot publications may take from five to ten minutes to
finish. After the CRMMetaPub snapshot is completed, you receive the
following message:
A snapshot of 79 article(s) was generated.
After the CRMPub snapshot is completed, you receive the following
message:
A snapshot of 93 article(s) was generated.
12. After the snapshots are generated successfully, verify that the
schedule for the snapshot jobs was deleted. To do this, follow these steps:
a. Right-click each snapshot, and then click Agent Properties.
b. In the Agent dialog box, click the Schedule tab.
c. If any jobs are listed, click each one, click Delete, and
then click OK.
d. Complete steps a to c for the other snapshot agent.

If this is a new installation of the Sales for Outlook client, you will now
be able to successfully go offline. If this is an existing installation of
the Sales for Outlook client, follow these steps to remove the existing
registry entries and old tion attempts from the client:

Delete SFO client registry keys

Note Make sure that the Sales for Outlook (SFO) client is online. If the
actions that are described in this section are performed when the client is
offline, you will have to re-install the SFO client. 1. On the Microsoft SQL
Server where the Microsoft CRM database resides, click Start, point to All
Programs, point to Microsoft SQL Server, and then click Enterprise Manager.
2. In Enterprise Manager, expand Microsoft SQL Servers. Right-click
SQL Server Group, and then click New SQL Server Registration.
3. Register the SFO client MSDE instance with this wizard. For
example, if the SFO client computer name is SFOCLIENT, the MSDE instance is
named SFOCLIENT\CRM.

Note If you cannot successfully connect to the SFO client remotely
with Enterprise Manager, follow steps 3a to 3f to enable this connection. If
you can successfully connect, continue to step 4. a. In Microsoft Windows
Explorer on the client computer, locate C:\Program Files\Microsoft SQL
Server\80\Tools\Binn.
b. Right-click the SVRNETCN.exe file, and then click Open.
c. Click the General tab, and then change the Instance(s) on
this server: list item to CRM MSDE instance. (ex. SFOCLIENT\CRM)
d. Click TCP/IP protocol in the Disabled protocols section, and
then click Enable.
e. Click OK.
f. After you restart the Microsoft CRM Sales for Outlook client
computer, the SQL Server Service Manager will now successfully connect to
the MSDE CRM instance.

4. After you register the MSDE CRM instance, locate the Subscriptions
folder under the tion folder.
5. In the Subscriptions folder, delete both SFO client subscription
names. These subscriptions may or may not exist, depending on where the
error occurred when you went offline.Important This article contains
information about how to modify the registry. Make sure to back up the
registry before you modify it. Make sure that you know how to restore the
registry if a problem occurs. For more information about how to back up,
restore, and modify the registry, click the following article number to view
the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows registry
6. On the SFO client computer, click Start, and then click Run.
7. Type regedit, and then click OK.
8. In Registry Editor, click My Computer, and then right-click Export.
Export the whole registry entry for the SFO computer.
9. In Registry Editor, expand HKEY_LOCAL_MACHINE, expand SOFTWARE,
expand Microsoft, and then click MSCRM. Right-click the UsertionID
registry subkey in the right window pane, and then click Delete.
10. In the same location, right-click the SQLServerName registry
subkey in the right window pane, and then click Delete.
11. In the same location, right-click the LastSyncDate registry entry
in the right window pane, and then click Delete.
12. Restart Outlook.
13. Verify that you can successfully synchronize the Microsoft CRM
Sales for Outlook client.



--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


<com> wrote in message
news:googlegroups.com... 

Creating a web site on a unique IP address

Posted: 15 Aug 2005 05:01 AM PDT

One other thing that comes to my mind, have you done this after you have
used httpcfg:

net stop http /y

net start w3svc


--
Regards,
Kristofer Gafvert (IIS MVP)
http://www.gafvert.info/iis/ - IIS Related Info


Tim Long wrote:
 

Email history and sent items

Posted: 15 Aug 2005 12:35 AM PDT

this is correct, there is a microsoft kb article stating it will not hit the
sent items box.

--
John O'Donnell
Microsoft CRM MVP
http://www.mscrmfaq.us


"Rob Bakkers" <microsoft.com> wrote in message
news:com... 
possible 
it 
button, 
my 
button, 
my 
CRM 

Data Migration - error

Posted: 13 Aug 2005 04:39 PM PDT

With the help of Microsoft's support staff we were able to identify the
issue. The migration's initalize tool did not set the Migration code to true
for the following entities for some unknown reason:
Organization, Territory, SystemUser & Business Unit.
The "MigrationCode" field is found in the cdf_EntityMigrationInfo. This
field is usually set to true (via some trigger) when records are added to
enityTables... when records were added to the 4 mentioned entity tables
indicated above by the initialization tool, the trigger did not "fire".
Just in case this helps anyone in the future.
"rqcoder" wrote:
 

Emails not posted to cases

Posted: 12 Aug 2005 08:59 AM PDT

Thank you.

"MattNC" wrote:
 

Aspnet_wp.exe could not be started

Posted: 12 Aug 2005 01:10 AM PDT

To the best of my knowledge no changes in web.config.
Password change on the crmadmin acoount .
This is probably the cause of all teh problems.

And a install of the data migration framework but this was aftr the problems
with the webclients.


"Matt Parks" wrote:
 

CRM VIRGIN

Posted: 10 Aug 2005 08:54 PM PDT

There are three great books that you should purchase. These are available
from Microsoft Business Solutions. Also join com and
com and contribute. If you would like to work with
an MS CRM consultant for a while to get started let me know.

--
Anne Stanton, CRM-MVP, MBA/ACC
http://www.thenorwichgroup.com
com


"Matt Parks" <com> wrote in message
news:com... 

Microsoft Word - Where's my Themes

Microsoft Word - Where's my Themes

Where's my Themes

Posted: 30 Dec 2014 02:47 PM PST

I am trying to apply a Theme to a Word 2010 document. I click on the Themes button in the ribbon and choose a Theme but nothing is displayed to show that the Theme was applied. It still looks the same; none of the graphics  show up.

Can not print Word 2007 docs following 34 updates on Dec 10 2014

Posted: 30 Dec 2014 01:54 PM PST

Can not print Microsoft Office Professional Word 2007 docs following 35 updates on Dec 10 2014.

Anyone else experiencing this problem?  Any suggestions?

Page numbers not updating from page to page

Posted: 30 Dec 2014 12:30 PM PST

I have a document with 65 pages. I inserted a page number field in the header using the F9 key, { PAGE }, but the number is the same on all pages. Shouldn't it be changing automatically on each page?

Can't insert a PDF into a Word 2013 document

Posted: 30 Dec 2014 11:09 AM PST

When I try to insert a PDF into a Word 2013 document, I get either an icon that states there is a PDF there or a text box with the title of the PDF. This never happened in any other version of Word I have used.

Can anyone explain how to overcome this?

Thanks,

Dennis

Auto-populating Content Control (Document Property Quick Part - not document properties) Data in Word 2013

Posted: 30 Dec 2014 10:51 AM PST

i have a Office 2013 question which right now i am going to limit to Word.  i am looking to build some document templates.  i want to create a template document that i can fill in data one time and have it auto-populate throughout the document anywhere that data may be.  this has 2 elements that i am not sure how to do in concert together:

  1. create custom fields with tags that can be placed throughout the document and when i edit anyone of those tags, all other tagged text auto updates.  there is functionality for this already with the content controls under quick parts | document property.  if i add and reuse any of those, updating one will update all areas where that 'document property' is used.  however, when i create custom content controls (let's say for customer), that seems to break the behavior where the data in that 'document property' exists.  so basically, first i am looking for a way to add to the 'document property' items that can be found under Insert | Quick Parts.  if i could only do this one of the three, that would be a huge step forward.
  2. i would like to have all of these 'document property' list items show in a navigation pane in Word.  that way i don't have to go through the document but could rather just update that list in the navigation pane. 

i am not a developer though i have gone as far as downloading visual studio and trying to follow an msdn article.  but my development and tool ignorance is a limiting factor for that being successful.

if the answer is, 'you need custom coding' then i'm okay with that.  if we can do it native Word then that'd be awesome.  i do want to avoid using macros because at times i use these on locked down systems which prevent the use of macros.

very grateful for the help!

also, if anyone has any recommendations for a really thorough Word training class i'd love to know more.

Microsoft Word Printing in different shades of black

Posted: 30 Dec 2014 09:49 AM PST

In a document header I have a single line with black shaded background and abutting it in the document I have a black shaded header with text with an effect on it (glow).

Although they are set to be the same colour, the bar in the header is printing a different shade of grey than the background of the header.

Where the effect of the text appears to be overlapping the bar in the header, that is the same (darker) shade as the header background.

I have had this issue with different versions of Microsoft Office, (currently using both 2010 and 2013), and also with different printers (a Xerox Document Centre and a Canon ImageRunner).

Any help or suggestions are appreciated.

I have a document where all of my headers disappeared.

Posted: 30 Dec 2014 08:17 AM PST

What could have caused this, besides my error? I can't see where I could have accidentally hid them or turned them off.

Word for iPad table merge cells?

Posted: 30 Dec 2014 07:31 AM PST

I inserted a table in Word for iPad, but I can't find a way to merge the cells. I need this function desperately. Is there a way to do it? If it is not supported, is there any workaround?

Hyperlinks in Word

Posted: 30 Dec 2014 06:59 AM PST

I have a word document that was sent to me and if you hover over an area in the table of contents it shows 'ctrl click to follow link' and I would like to remove these but if I right click on the line hyperlink does not come up in the drop down list.  Can you tell me how to find the hyperlink to delete.  If this was copied from another document would it show the hyperlink like that but not actually be there.  If I ctrl click they all take me to the top of the page and no matter where I click all of the table of contents is selected. 

First Item of Numbered list Indents Itself

Posted: 30 Dec 2014 06:14 AM PST

When I select "Restart at 1", for a numbered list, the first item of the renumbered list jumps to an indent of 1.5 cm. How can this be rectified?

Thanks,

Larry

Track Changes in Word 2013

Posted: 30 Dec 2014 04:11 AM PST

I am trying to work on an edited manuscript (my work, downloaded with editor's changes tracked) but Word stops responding every time I try to accept or reject a change. Does anyone have any ideas how I can address this? Home PC, Windows 8. 

Microsoft Word Conversion

Posted: 30 Dec 2014 04:00 AM PST

Hi,

Your solution is highly appreciate.

I have the Web Based Document Management System, the System has the three roles 

Here's the User Roles

1. Administrator ( Has the full control on the application )

2. Author : Person who develop the process document and upload in the Web Based Document System for Review

3. Reviewer : Who review the document and approve the document to publish

Once the Author upload the word document in to the Web Portal, The review will receive the document link in grid, Clicking on the link the document should open in PDF viewed in browser.

The word to PDF conversion is working in my local development machine, when i tried to deploy the Office PIA (Primary Interop Assemblies) in staging or production server the Word to PDF conversion is get failed and throw the com exception

Please check us know your comments 

Regards

-SH

MS Office Upload Ctr

Posted: 30 Dec 2014 01:56 AM PST

I noticed that out of the blue this orange icon appears.  Is this a safe sign?  The cursor also keeps moving and says the USB has stopped working when the only USB attached is the mouse and the printer and both of them are working fine.  Please help as I do not know if this is a manner in which hackers get in?  Also the Send to  OneNote Tool appears in the Task Bar, too.

unexpected error 32809

Posted: 30 Dec 2014 01:14 AM PST

I have a FORM .dotm - works fine on my computer and several others.

when run on another computer I get 'unexpected error 32809' - have no idea why????

Actually shows: Application-defined or Object-defined error - run-time error 32809

the macros on the form are these:

(the funny characters are HEBREW but all works ok)

Private Sub CommandButton11_Click()

With ActiveDocument
     .Shapes(1).Visible = msoFalse
     .Shapes(2).Visible = msoFalse
End With
 
Call FileSave

End Sub
Sub FileSave()

  If ActiveDocument.Path = "" Then
        Call FileSaveAs
  Else
        ActiveDocument.Save
   End If
End Sub
Sub FileSaveAs()
    Dim strTag As String
    Dim strñåâ As String
    Dim strùí_äãéøä As String
    Dim strùí_äîá÷ø As String
    Dim strúàøéê_áé÷åø As String
    Dim strùòú_äáé÷åø As String
    Dim strPath As String
    Dim strFilename As String
   
    strPath = "\\filesrv\Diur\management\îðäìé úçåîéí\áé÷åøéí áãéøåú\" ' <== change as needed

    strTag = "ñåâ"
    strñåâ = GetCCcontentbyTag(strTag)
    If strñåâ = "**EmptyCC**" Then
        MsgNotReady strTag
        Exit Sub
    ElseIf strñåâ = "**MissingCC**" Then
        MsgMissing strTag
        Exit Sub
    End If
   strTag = "ùí_äãéøä"
    strùí_äãéøä = GetCCcontentbyTag(strTag)
    If strùí_äãéøä = "**EmptyCC**" Then
        MsgNotReady strTag
        Exit Sub
    ElseIf strùí_äãéøä = "**MissingCC**" Then
        MsgMissing strTag
        Exit Sub
    End If
    strTag = "ùí_äîá÷ø"
    strùí_äîá÷ø = GetCCcontentbyTag(strTag)
    If strùí_äîá÷ø = "**EmptyCC**" Then
        MsgNotReady strTag
        Exit Sub
    ElseIf strùí_äîá÷ø = "**MissingCC**" Then
        MsgMissing strTag
        Exit Sub
    End If
    strTag = "úàøéê_áé÷åø"
    strúàøéê_áé÷åø = GetCCcontentbyTag(strTag)
    If strúàøéê_áé÷åø = "**EmptyCC**" Then
        MsgNotReady strTag
        Exit Sub
    ElseIf strúàøéê_áé÷åø = "**MissingCC**" Then
        MsgMissing strTag
        Exit Sub
    End If
    strTag = "ùòú_äáé÷åø"
    strùòú_äáé÷åø = GetCCcontentbyTag(strTag)
    If strùòú_äáé÷åø = "**EmptyCC**" Then
        MsgNotReady strTag
        Exit Sub
    ElseIf strùòú_äáé÷åø = "**MissingCC**" Then
        MsgMissing strTag
        Exit Sub
    End If
   
    strPath = strPath & strñåâ & "\"
       
     ActiveDocument.SaveAs2 FileName:=strPath & strùí_äãéøä & " " & _
        strùí_äîá÷ø & " " & strúàøéê_áé÷åø & " " & ".pdf", FileFormat:=wdFormatPDF
   
    Call SendEmail(strPath, strñåâ, strùí_äãéøä, strùí_äîá÷ø, strúàøéê_áé÷åø, strùòú_äáé÷åø)
End Sub
Function GetCCcontentbyTag(theTag As String) As String
    Dim CCs As ContentControls
    Dim CCcontent As String
    Set CCs = ActiveDocument.SelectContentControlsByTag(theTag)
    If CCs.Count = 0 Then
        ' Should not get here if CCs are marked "cannot be deleted"
        CCcontent = "**MissingCC**"
    Else
        If CCs(1).ShowingPlaceholderText Then
            CCcontent = "**EmptyCC**"
        Else
            CCcontent = CCs(1).Range.Text
        End If
    End If
    GetCCcontentbyTag = CCcontent
End Function
Sub MsgNotReady(theTag As String)
    Dim strTitle As String
    Dim strMsg As String
    Select Case theTag
        Case "ñåâ"
            strTitle = "ñåâ"
        Case "ùí_äãéøä"
            strTitle = "ùí_äãéøä"
        Case "ùí_äîá÷ø"
            strTitle = "ùí_äîá÷ø"
        Case "úàøéê_áé÷åø"
            strTitle = "úàøéê_áé÷åø"
        Case "ùòú_äáé÷åø"
            strTitle = "ùòú_äáé÷åø"
        Case Else
            ' can't get here except by error
            strTitle = "ìà éãåò"
    End Select
    strMsg = "äúéáä " & strTitle & " öøéëä ëðéñä." & vbCr & _
        "àðà îìà àåúå åìðñåú ùåá ëãé ìùîåø."
    MsgBox strMsg
End Sub
Sub MsgMissing(theTag As String)
    Dim strTitle As String
    Dim strMsg As String
    Select Case theTag
        Case "ñåâ"
            strTitle = "ñåâ"
        Case "ùí_äãéøä"
            strTitle = "ùí_äãéøä"
        Case "ùí_äîá÷ø"
            strTitle = "ùí_äîá÷ø"
        Case "úàøéê_áé÷åø"
            strTitle = "úàøéê_áé÷åø"
        Case "ùòú_äáé÷åø"
            strTitle = "ùòú_äáé÷åø"
        Case Else
            ' can't get here except by error
            strTitle = "ìà éãåò"
    End Select
    strMsg = "äúéáä " & strTitle & " öøéëä ëðéñä." & vbCr & _
        "àðà îìà àåúå åìðñåú ùåá ëãé ìùîåø."
    MsgBox strMsg

End Sub

Sub SendEmail(strPath As String, strñåâ As String, strùí_äãéøä As String, strùí_äîá÷ø As String, strúàøéê_áé÷åø As String, strùòú_äáé÷åø As String)
'Send Email to Offer that file has been created


    strFilename = strPath & strùí_äãéøä & " " & _
        strùí_äîá÷ø & " " & strúàøéê_áé÷åø


    Dim OutApp As Object
    Dim OutMail As Object
 
    Set OutApp = CreateObject("Outlook.Application")
    OutApp.Session.Logon
    Set OutMail = OutApp.CreateItem(0)
 
        With OutMail
            .To = "*** Email address is removed for privacy ***"
            .BCC = "*** Email address is removed for privacy ***"
            .Subject = "ãåç áé÷åø ùì ãéøä " & strùí_äãéøä
            .Body = strFilename
            .Send
        End With

    Set OutMail = Nothing
    Set OutApp = Nothing


'   Close active document

    Application.Quit SaveChanges:=wdDoNotSaveChanges

End Sub

Private Sub CommandButton111_Click()

End Sub

Problem with specific word form

Posted: 30 Dec 2014 12:37 AM PST

                    

Hi ,

we have problem with invoice form (word file),we can enter all the data except one filed (numeric), the file is secured, but it supposed that the user is able to enter the data, note that the rest of the users have no problem with the file, we tried to reinstall microsoft office 2010, then installing office 2007, and installing office 2013 with same result , on any computer we have no problem except this computer its maybe security settings on the office package, i tried to install hotfixes to remove the registry data , and also tried generate new windows profile with no result,

Please advise.

Can I use my Microsoft account for word on another computer?

Posted: 29 Dec 2014 09:37 PM PST

I recently got a new computer and I want to be able to use the Office programs with out having to repurchase anything. Is there a way I can have my Office account on both of my computers at once?

Compile error in Hidden Module: AZ Wizard Modul in Word 2013

Posted: 29 Dec 2014 08:43 PM PST

I just installed Word 2013 and I'm getting Compile error in hidden module: AZWizardModul every time I open a Word document. I can see the add in by going to File>Options>Add Ins but I can't disable it.

How can I disable the add in or delete it? I am running Windows 7 Home Premium SP1.

Instructions for using Excel Data in a Word document/letter

Posted: 29 Dec 2014 07:35 PM PST

Hi. Very new here.

I do work for several organizations and have been using an old program - Lotus Approach - to store names, addresses, amount the member is to be billed, payment dates, etc. (Approach is a database program.) But while it still runs under Windows 8.1 (which I am running on an iMac), I am always afraid that it won't on the next version of Windows.

I also have MS Office Home installed, so I have MS Word and Excel. I can export the data from Approach easily into an Excel spreadsheet, but that won't give me access to my billing formats (basically in letter form) and various report formats and the ability to print mailing labels.

I believe that I remember that you can export Excel data into Word to print labels and - more importantly - print form letters. Can anyone direct me to somewhere that there are instructions on how to do this?

Thanks, 

Steve
Subscribe to: Posts (Atom)