Pages

Search

Can any recommend a pre-assessment test for MS Project users Microsoft Project

Can any recommend a pre-assessment test for MS Project users Microsoft Project


Can any recommend a pre-assessment test for MS Project users

Posted: 12 Nov 2005 06:27 AM PST

Steve,
Thank you. I agree with you 100 percent and have had formal training in PM
and teach those skills along with the software. However, this training was
done as a requirement of a state workforce grant and apparently, they need to
see a pre and post assessment on software skills as well as for the PM
training the group received.

Kay

"Steve House [Project MVP]" wrote:
 

MS Project -> Lotus Notes

Posted: 11 Nov 2005 01:14 PM PST

Hi,

thanks for your response. I found in between by google research a the tool
Allocatus, which does what I want.

Thanks again
Graham

--
Graham Smith
"JulieS" <passport6847 at maine dot rr dot com> wrote in message
news:phx.gbl... 


how do I stop project from calculating actuals

Posted: 11 Nov 2005 12:28 PM PST

Hi,

You could also use Physical %complete which does not feed back to actuals
and seems to be what you have in mind.

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"capo3playd" <microsoft.com> schreef in bericht
news:com... 
enter 


What percent of projects are late and overbudget?

Posted: 11 Nov 2005 06:23 AM PST

Hi Dan,

I can't give you figures, but I can suggest you define what is meant by
"success". On time and within budget is not a valid measure. I would be so
bold as to suggest that some 90% of properly planned projects would be on
time and within budget if they were allowed to progress from start to
completion without any interference. The prime reason why projects appear
go astray is because the parameters on which the project was planned, are
changed frequently as the project progresses, without due acceptance of the
subsequent changes to completion date and extra costs. Indeed, in spite of
all the changes to specifications, projects are more often than not unfairly
measured against the originally stated completion date and budget. If only
the PMs could be left alone to get on with the job without change!

Mike Glen
MS Project MVP

nospam wrote: 



How can I input a deadline with an option of 5 days delay is ok?

Posted: 11 Nov 2005 02:40 AM PST

First of all, you shouldn't try to set start and finish dates for tasks at
all - these are normally calculated values. In fact the whole reason
scheduling software such as Project exists is to calculate those dates for
you. The start date is calculated as the earliest possible start based on
project kick-off date and the durations, links, etc of all the tasks leading
up to the task in question. The finish date is the calculated from start
date plus the estimated duration it will take to complete the work. To show
that it needs to be completed by a certain date, set the deadline entry on
the task's advanced tab to that date.

I notice your example is a task that lasts an entire year. A task is a
discrete block of work done by a single set of skills that results in a
single deliverable and very, very rarely would such a thing last a full
year. In fact, the general rule of thumb is called the "8/80 Rule" which
says if the task is less than 8 hours in duration you're micro-managing to
excess but if it is more than 80 hours you haven't broken things down far
enough to actually be able to manage it at all.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Yon Han CHONG" <Yon Han microsoft.com> wrote in message
news:com... 

How do I prioritize tasks in Project 2003?

Posted: 10 Nov 2005 02:16 PM PST

One of the primary uses of Critical Path Scheduling is to prioritze
tasks. Tasks with less slack have a higher priority than tasks with
more slack. Of course, you have to take in other factors as well, like
risk, complexity, etc. But certainly slack should be a factor.

% Incomplete Tasks

Posted: 10 Nov 2005 10:46 AM PST

Hi Qaspec,

Welcome to this Microsoft Project newsgroup :)

You might like to have a look at my series on Microsoft Project in the
TechTrax ezine, particularly #14 - Customizing Fields, at this site:
http://tinyurl.com/2xbhc or this:
http://pubs.logicalexpressions.com/Pub0009/LPMFrame.asp?CMD=ArticleSearch&AUTH=23
(Perhaps you'd care to rate the article before leaving the site, :)
Thanks.)

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP

JulieS wrote: 



Cross-project dependencies

Posted: 10 Nov 2005 10:41 AM PST

Thanks, Jan. I spoke too soon -- the master does in fact show the links in
grey. We can close this thread.

"Jan De Messemaeker" wrote:
 

PERT on 'Work' - not 'Duration'

Posted: 10 Nov 2005 02:47 AM PST

Hi Johannes,

You are welcome for the answer and glad to know it helped solve your
dilemma. As far as the why question -- sorry, I gave up long ago trying to
fathom the reasoning why for all software -- including Project ;-).

Thanks for the feedback.
Julie

"Johannes Nyholm Jørgensen"
<microsoft.com> wrote in message
news:com... 


Best Practice

Posted: 09 Nov 2005 07:08 AM PST

Create a hammock task that is whose duraton is driven by the project start
and end dates for the managment task(s) an assign the PM to it as tjhe
resource.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"Matium" <net> wrote in message
news:googlegroups.com... 

Microsoft CRM - Removing a license

Microsoft CRM - Removing a license


Removing a license

Posted: 27 Jun 2005 07:43 AM PDT

That did thanks.
--
Eric Notheisen
Culminis, Inc


"Matt Parks" wrote:
 

Automatically having all incoming emails as CRM activity is not wo

Posted: 27 Jun 2005 02:53 AM PDT

I was trying to configure all incoming emails as a crm activity.

This configuration, which involves a setting on crm client and also on the
exchange server wasn't working.

Just re installed the router, and restarted the m achine and it started
working fine.

Thanks Michael, you set me thinking in the right way.

Regards,

Sumit.

"Michael MARTIN" wrote:
 

Graphic Images in E-mail Templates

Posted: 26 Jun 2005 08:03 AM PDT

hi Ken,

The best way to use this is to put the graphics you want to use on an
accessable share, remember if the E Mails are going to an external company /
person the share sould be publically accessable across the web.

The best way is to FTP the graphic up to the share, use IE to display the
graphic at that location, and just "right click and copy" to copy and switch
back to the E mail template editor and "ctrl insert"

Hope this helps

Andreas Donaubauer [MVP für CRM]
MCP seit 1999, MCSE, MCSA
andreas[at]donaubauer.com
http://www.crmfaq.de



"cc" <microsoft.com> schrieb
im Newsbeitrag news:com... 


Emailing Sales Literature???

Posted: 24 Jun 2005 10:37 AM PDT

Also, this german company sells an extension through which it is
possible to attach Sales literature to emails: http://www.awisto.de

Changing division error

Posted: 24 Jun 2005 09:13 AM PDT

What a happy monday morning !! I've tried what you suggested (changing the
user's role to 'salesperson') and it works !!

Very good idea Nathan, thanks you very much :)
--
Michael MARTIN
BrainSoft (France)


"Nathan Warner" wrote:
 

Migrating DB Server

Posted: 24 Jun 2005 08:45 AM PDT

Thanks for replying Tim.
I hope there will be no issue with the different combination of OS and
migrating the DB over to different edition.
If somebody experience any kind of issue in migration of DB over to another
edition, please let me know.
There are two other application integrated with CRM; I just need to see how
they are accessing the database server. One of them has different database on
the same DB server. [Those application should be using some consistent way to
get the database server name by using sdk etc.]

tion is turned on, by the way and I am thinking to generate the
script and run on the new DB server. I don't think there will be any issue.

Having option for switching back to old db server is definitely a blessing
here. Thanks.


"Tim..." wrote:
 

Extracting Data from CRM

Posted: 24 Jun 2005 07:21 AM PDT

I would recommend looking at Scribe or look into the SDK and writing some custom
imports. There aren't many other options as the DMF won't work that well in
this case due to the existing data.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On 24 Jun 2005 07:21:09 -0700, com wrote:

Hi All,

We have just acquired a company which we are in the process of
integrating into our IT infrastructure.

Both organisations currently have CRM running i need to do the
following:

1. Extract SALES data from one system and import it into the other.

2. Extract SERVICE data from one system and import it into our 3rd
party helpdesk software.

Has anyone had any experience of this or have any suggestions as to how
it might be done?

Thanks in advance,

Chris

admin is owner causing problems

Posted: 23 Jun 2005 09:19 PM PDT

There aren't a lot of options. Unfortunately, related objects follow the
Account when the ownership changes. You can try to mass-assign the reps
accounts to them and they will then get the appropriate activities back, but it
might not be as clean as you want. Either way, you're in for some heartache on
this one.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 23 Jun 2005 21:19:01 -0700, "Bobby" <microsoft.com>
wrote:

I am in charge of cleaning up the CRM database after an implementation gone
bad.

I have noticed that most of the Accounts, Leads, Contacts, etc. are owned by
the CRM Admin account, and Account created exclusively for administering the
CRM application.

This is more than likely because all the data was originally imported under
this account.

The problem is that when you log on with the Admin account you see a ton of
past due activities. I'm expecting that is because the admin account is the
owner of the CRM account. We had a bright idea in a meeting to re-assign all
of the 1000 or so accounts that were owned by the CRM Admin account to the
Administrative Assistant of the respective Terrority.

Now all of our Sales folks are screaming that they don't have their
activities anymore.

What can we do about this with the least minimal impact?

CRM Administrator Account Lockout problem

Posted: 23 Jun 2005 07:56 AM PDT

Restoring the DB won't be enough as the AD group membership will also have been
removed.

If you are comfortable playing with GUIDs, you can do the following to try to
get it working...

First, find the GUID for both the User (SystemUserBase table) and the System
Admin role for the appropriate BU (RoleBase). With this information, you can
then do the following:

- Add a corresponding record into the SystemUserRole table
- Add the user to the correspondig AD group (in the correct OU)

That hoefully will fix it for you.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 24 Jun 2005 01:17:02 -0700, fc3 <microsoft.com> wrote:

If you don't have removed your user from A.D. also, you can try to restore
database.

"Richard Sharp" wrote:
 

createdon field showing datetime values

Posted: 23 Jun 2005 01:30 AM PDT

Dates are stored in GMT in the database. When they are displayed and stored,
they are converted based on the users timezone settings.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 24 Jun 2005 20:45:37 +0300, "Elena" <gr> wrote:

The only thing I want is to for the field "createdon" at the Account form to
show the same data that is stored in the database...
What I want seems to happen for the Leads but not fir the Accounts or
Contacts.

Regards,
Elena


"Ron Wallegie" <com> wrote in message
news:ed0bw9%phx.gbl... 


OMA - is it possible to add a signature/disclaimer to e-mails - Microsoft Exchange

OMA - is it possible to add a signature/disclaimer to e-mails - Microsoft Exchange


OMA - is it possible to add a signature/disclaimer to e-mails

Posted: 10 Dec 2007 03:10 AM PST

Thanks Mark

"Mark Arnold [MVP]" wrote:
 

E2K7 Exchange System Attendant service doesnt't start

Posted: 09 Dec 2007 01:31 AM PST

Many Thanks Paul - because you answered two questions in a reply from one
post!
I have been looking for this start/stop script of the Exchange services
(yes, my Exchange server sits on a DC and that's why it takes so long to
stop the machine).
I had these scripts with E2K3 and knew what are the services to stop with
E2K7, but... in which order? Now I know...
Thanks again and Merry Christmas to you as well.
Nicolas


"pgartner" <com> a écrit dans le message de news:
googlegroups.com... 


Managing Inbox for "support" questions.

Posted: 06 Dec 2007 01:27 PM PST

You can do this with a mail enabled public folder.

"Joe" wrote:
 

exchange crashed. Sync back from OST files?

Posted: 06 Dec 2007 09:06 AM PST

Oliver Moazzezi [MVP] <co.uk> wrote: 

Yes, in a perfect world that would be nice. But in a smaller office (which
is what I presume we're talking about here) that often isn't economically
feasible. Of course, nightly full backups are a must regardless.


Comments on proposed Exchanage server configuration

Posted: 05 Dec 2007 05:01 PM PST

Something I want to make clear, I do appreciate the information that's being
given. I'm not in any way trying to be argumentative, or trying to dispute
the fact that that RAID1 is better performance than RAID5, or trying to
disagree with the various I/O design guidelines that have been doented.

I do realize there is going to be a penalty associated with the drive
configuration I'm looking at. The intent of my original posting is to just
try to minimize that penalty and get as much usability as possible within
the limits of my currently available hardware.

Mike O.


"Mike O" <can> wrote in message
news:ew%phx.gbl... 

Rename User

Posted: 05 Dec 2007 01:57 PM PST

I guess it's not in the address book per se, but regardless they do see the
old name, and continue to do so.

"Brendan Erofeev" wrote:
 

Message size restrictions

Posted: 05 Dec 2007 07:22 AM PST

I have two last questions :

1)How to create an address list that contain all users from an OU, most of
choices I have is to create a custom attribute.

2)How to get message size restrictions for all user, from ps.

Thanks for your help.


"Bharat Suneja [MVP]" wrote:
 

Linked Mailbox and OWA

Posted: 04 Dec 2007 03:14 PM PST

Yes Bharat,

I tried everything:

username

domain\username

local (which the UPN, I guess)

com

Nothing works.

Maybe I need to change something in the security and authentication features
of IIS....

Regards
Nicolas



"Bharat Suneja [MVP]" <org> a écrit dans le message de news:
phx.gbl... 


event id 111 exoledb

Posted: 04 Dec 2007 07:10 AM PST

I have a storeevents system public folder. This error appear only when i
restart the server.

"Dgoldman [MSFT]" wrote:
 

Exchange Server 2007 SP1 and Exchange Server Roles

Posted: 04 Dec 2007 06:48 AM PST

As Mark says, it's a typo in the release notes, they will be updated
shortly.

SP1 does not make you install UM on a dedicated server, you can still
combine roles.

Oliver


"Mark Arnold [MVP]" <org> wrote in message
news:com... 


Outlook 2007 loosing connectivity to Exchange 2003

Posted: 04 Dec 2007 06:12 AM PST

On Tue, 4 Dec 2007 15:12:41 +0100, "Zoran" <dk> wrote:
 

Have your users uncheck the "Cache Shared Folders" option ( I assume
they are in cache mode) and see if that makes it better.
Outlook 2007 and Exchange 2003 is not always better together.

 

Exchange 2007 Email Address Policy

Posted: 03 Dec 2007 09:49 AM PST

- Only one policy gets applied to users at any given time.
- Recipeints can have multiple email addresses - the thing to watch out for
is whether the primary SMTP address is correct/from the correct domain.

--
Bharat Suneja
MVP - Exchange
www.zenprise.com
NEW blog location:
exchangepedia.com/blog
----------------------------------------------


"DavidK" <microsoft.com> wrote in message
news:com... 


Exchange 2007 with two domains

Posted: 01 Dec 2007 01:58 AM PST

Andy,

OK - the culprit was the trust.
I did a domain trust, and you need a "forest" trust.

I managed to create a mailbox for a domain2 user - not straightforward
though.

One more question: With wich credentials can a user from domain2 access to
his webmail via OWA (Outlook Web Access): user : domain2\jsmith and his
domain2 password doesn't work.

I tried a few things - with no use.

Any idea?

Regards

Nicolas

"Andy Wong" <microsoft.com> a écrit dans le message de
news: com... 


Microsoft Word - word

Microsoft Word - word


word

Posted: 23 Nov 2014 01:42 PM PST

how to manipulate this message

This message appeared any time when I try to open the WORD

we re sorry but word has run into an error that is preventing it from working correctly. word will need to be closed as result would you like us to repair now?  I answer yes and it does nothing and the problem continue

Help! Whenever I open Word my screen goes black

Posted: 23 Nov 2014 01:17 PM PST

Okay, so here's my problem. I'm unsure of what is causing this, so I will just start where things started to go wrong. I installed the most recent Windows Update. I don't know if that's what started this, but that's when I noticed that my laptop would keep freezing periodically. It's an old laptop, two and a half years old, so it freezes from time to time, however, I'm patient and wait for it to wake up & start going again. I didn't really think anything of it. Now, I had Word open (I'm an author, so it's almost always open), and it would freeze, then unfreeze. It froze again and the screen went black...then came back. I got a little message saying it had to recover the screen. Everything was running normal again for a few minutes, until Word froze again, this time the screen going black and not coming back. I had to do a hard restart (which I know is bad for the laptop, but I had no choice). This is when things started getting worse. I rebooted, everything looked fine, so I tried to open Word again. I got nothing but a black screen and I had to hard restart AGAIN. Now this happens whenever I open Word.

I contacted support and was told it's because my laptop has a virus, which my Norton is not finding. They did their thing & it was working for two days, until I tried to install the important update again, which I did last night. Today it started doing the same thing. This virus is supposed to be blocking the program from starting, but I don't understand what that has to do with the screen going black. I NEED Word. It's my livelihood. I can't open it without the screen going black and my laptop essentially freezing. Hard restarts are the only solution, and even then, worse than that, it's starting to freeze at the start up screen. This didn't start to happen until I did the update, but I can't recover to an earlier date because it freezes when it tries to reboot. Is anyone else having this problem? Does anyone know of a solution, other than "buy a new laptop" or spend $100 for Microsoft to do their thing? I don't have over $100 to fix the laptop, even then, might as well buy a new one.

Microsoft Gruber - The New Microsoft Line

Posted: 23 Nov 2014 12:25 PM PST

Well, it's finally dawned on me.  I didn't realize that the newest line of Microsoft software is actually the new Gruber line of software. 

Apparently, just like Jonathan Gruber recognized that voters are stupid to know what laws are good for them, Microsoft has embraced the belief that users are too stupid to know what's good for them. 

In accord with such belief, Microsoft now designs software to force users to use such software the way that Microsoft thinks it should be used.

After all, most users aren't geniuses from MIT.  Who cares if a dumb user wants a start button, or an on off switch which is in open view. 

Microsoft has decided that it knows better than users, and since the geniuses at Microsoft think there shouldn't be a start button, they just took it away, and figured that the dumb users will just have to deal with it.

The same goes for auto-formating features in Word.  Users are just too dumb to know how paragraphs should be formatted, indented and how lists should be created, so Microsoft chooses how, and who cares if dumb users have to waste vast amounts of time trying to stop Word from un-doing changes to a document which the user doesn't want.

Perhaps Jonathan Gruber was a consultant for Microsoft, just as he was for the government.  That would certainly explain a lot.

One thing that seems perfectly clear, apparently there are enough Gruber-Idiots at Microsoft, that we can be certain that Microsoft's Gruber software products will continue coming out, unless enough of us dumb users finally start using products other than Microsoft.

Word 2007 format and save issues

Posted: 23 Nov 2014 08:03 AM PST

This has only started happening mid way through using a document. Once saved the file is reopened and shows no text at all. I can view it in print form only but when I change to edit mode all the text disappears?

also it takes soooo long for the computer to respond to key commands it is laughable.

any advice?

i have rebooted, updated windows, tried in safe mode (word would not even launch in safe mode, error message appeared with yellow writing) to no avail.

loads of work to do and infuriating I can't find the problem.

i saved a 74 doc. Emailed it to my other laptop and it shows 2 pages, the first has text and the second is blank??

many thanks in advance

Can't get rid of white border around graphic when inserted into colored background!

Posted: 23 Nov 2014 06:57 AM PST

MS Word 2003 on Windows XP

I am working on a project that includes several pages with grey shadowing as a background.  When I try to insert a picture on one of these pages, a white border of about 12 points appears around the picture and messes up the look.

The same thing happens on certain pages that have borders around selected text.  When I insert a picture on the left or right side of the paragraph, the "imaginary" white border around the picture overlaps that side of the border so that there is a very noticeable gap.  I feel like I have tried everything to resolve this issue, but nothing has come close to working.

This Word file has to be converted to pdf to be published pretty soon, so any help would be appreciated!

Creating Circled Letters with dark background

Posted: 23 Nov 2014 06:47 AM PST

Is there a way to create letters with a circle around them with the circle being dark and the letter white, so I could use different font colors. 

Word for iPad - GOTO page number

Posted: 23 Nov 2014 06:45 AM PST

The new Word for iPad - is there any way to GOTO a certain page?  My document is 250 pages long.  

If it won't work in the free version, will it work in the Premium version?  If not, there's no point in upgrading!

Thanks... 

Pagenumbering very odd

Posted: 23 Nov 2014 05:41 AM PST

Hi all,

I have a problem with my document which seems to show more pages than it actually has. Also, I know very little about the mysteries of MS Word, which I am about to make painfully obvious.

Namely, a friend converted a 400-page PDF file (out of 2400 pages in total) to a Word document for me.

When I opened it there were 400 pages alright. The whole document had nothing but page after page of tables with three columns.

Since the file was so big, I had to split it into smaller documents (using select, copy/paste) which were more manageable to work with, with 30-ish pages in each. Everything seemed to have remained as it was in the original file (the page numbering and all).

I then went file after file (once I finished doing what I was doing) and, by again using select all, copy/paste, added file after file to a brand new document. I guess this might be what caused the problem, that I did not have a more sophisticated approach?

So, I am not done putting all the files back together, there are roughly 50 pages left, HOWEVER, the document which should have around 350 pages so far, has 417 pages total, according to the page count! But the tables seem to have remained untouched, not at all different from the tables in the original document. There is just a single blank page at the end, but all the numbers are where they should be, although it is hard to say because the document is really big, I might be wrong. I'm already panicking that I won't be able to fix it, but I need it to have 400 pages by the end of my project, it cannot have a single page more than that.

Does anyone have an idea what could have caused this surfeit of 70 pages?

Thank you so much!

Saved Word 2013 document shows up with no changes!

Posted: 23 Nov 2014 02:14 AM PST

Hello

Yesterday, I've had a most inconvenient problem working on a task for university. I will try to explain it with as much details as I can. I'm running Word 2013 (from the Office 365 for student edition) on a Windows 7 machine.

I downloaded a template for that task from the internet platform of my university. To avoid any compatibility problems (I believe my teacher still uses Word 2007), I just kept the titles and subtitles and copy/pasted them in a new file, which I saved under a new name in a OneDrive file for that class. I'm very conscientious and keep my files ordered. Yet something strange (but not important to me) occurred: the name of my teacher still showed up alongside my name as an "Author" of the new document.

I worked all day on this document, saving it every 15-20min, as it has become a reflex when using Word. When I was finally done, I saved the document once again and quitted Word. I went to the OneDrive website to get a share link, in order to send it to someone for review. I always double-check the document before I send it. I couldn't believe what I saw in the Word-Online app: the document showed up as a version from like 10 hours earlier, almost empty! I quickly went to my OneDrive for desktop folder to open my document again; the same occurred!

These are the steps I have already undertaken, based on some research on the internet:

- Open Word 2013 and check for auto-recovery, unsaved files, temp files, ~ files,... : nothing but that version that also shows up in OneDrive

- Go to the auto-save file (user/AppData/Local/Microsoft/Office/Unsaved Files): nothing, no files that have the same date/hour of "last modification"

- Run a file search, based on title and/or date: nothing

What could be the reason for this magic? Is there any possibility to recover it? If so, how?

This document took me 12 hours to write, and the idea of having to write it again is very, very frustrating...

Thanks for reading me and for your answers!

Regards

Adrian

Add ons for taking screenshot in Microsoft word

Posted: 23 Nov 2014 01:24 AM PST

I am looking for a add on with the help of which we can take screenshots and it will be pasted in word automatically, without being coming again and again in Word and pasting manually.Just start the add on and keep taking screenshots.It can actually save time when you have to take a large number of screenshots.I am currently using Microsoft Word 2003 and 2010.

Thanks in advance.

Pagenumbering

Posted: 23 Nov 2014 12:33 AM PST

Hi

I hope someone out there can help me with a very percular problem.  It started a fortnight ago after a word update.  I have since deleted all updates but the problem is with still with my computer.

My microsoft (word 2010) numbering system is no longer working and also has corrupted all files stored in my computer so I cannot bring an old document up and copy, paste a numbering system.

When I go into a footer and enter in a page number system instead of Page 1 of 1 etc it appears as Page {PAGE} of {NUMPAGES}.  This also happens when a document is sent to me with a page numbering system already inserted.

However, I note when I went to copy, paste the Page {PAGE} of {NUMPAGES} from a word doc to this page it came out as Page 1 of 1 !!!

I work from home and use this feature several times a day.  I would really appreciate it if someone could let me know how to correct this problem.  I have rebooted but problem has not gone away.

Thank you

Dawn

Unable to delete row below table header

Posted: 23 Nov 2014 12:19 AM PST

I had a file that was not created by me.

Below the table header that
repeats itself, I had a row that cannot be selected or deleted.

The blank
row probably forms part of the header.

Can anyone advice me of how to
delete it?

Thanks.

Closing down of Microsoft Word 2013 while using the paste function

Posted: 23 Nov 2014 12:08 AM PST

Dear,

I encountered an occasional problem while using Microsoft Office application (Home & Business 2013). When I copied some text and pasted onto another area in the same document, the Microsoft Word application simply closed down without any warning. When I re-opened it again, it showed the recovered file & I had to re-do the process again since it had not been saved. This also happened when I copied some text from a webpage and pasted it in my Word document. What is the possible cause of this problem and how to tackle this closing down of application issue while using the paste function?  Even if the document is in the compatibility mode, Microsoft Word 2013 should be able to handle it.  I noticed that uninstall & re-installation of the application does not help.

Thank you.

hightlighted Text's colour becomes inverted

Posted: 22 Nov 2014 11:17 PM PST

When I highlight words (not the highlighter just hold and drag) in Word 2013 the selection is black and photos become inverted. Before it was just a light grey highlight which is the same as my other computers using Word. I did install a new language pack before this started to happen.

Surface Pro 2 running 8.1

Here an example:

It highlights it black and inverse the colours instead of the default grey highlight, and I have no idea of how to change it back to grey.

Black text becomes white etc. Any way to change this back?

Comment bubbles disappeared

Posted: 22 Nov 2014 10:09 PM PST

I was reviewing a document in Word. I left the PC for about 15 minutes and when I came back, all my comment bubbles had disappeared. Not just the ones I had created in this session, but comment bubbles I had saved 2 days ago in the same document. What gives?

Edit Shape Button

Posted: 22 Nov 2014 09:52 PM PST

Hi

i am trying to edit a shape in word 2007 however I can't click on "Edit Shape" as it is greyed out. Can you please assist? Thanks.

Can't change default thesaurus

Posted: 22 Nov 2014 09:27 PM PST

Greetings,

I actually have two problems:

  1. I can't change the default thesaurus to English (U.S.)
  2. I can't remove English (U.K.)

I can remove English (U.K.) by opening the Research pane and clicking Research options at the bottom. I clear "Thesaurus: English (U.K.)" and click OK. However, the next time I open Word, it's back again.

How can I remove English (U.K.) from the thesaurus?

Thanks,

Shane.

Bullet Does Not Appear Every Time I Press Enter

Posted: 22 Nov 2014 07:51 PM PST

Hi all,

So I am creating a simple bulleted list, and usually, you would automatically see a bullet everytime you press enter, if the line above had one as well. However, I am not getting the this new bullet. Rather, the document just resets itself to the settings it had before the bullet system. Thus,  I would have to click the "bullet-style list" button for every new line to get a bullet. Please answer ASAP!!! Bullets are kinda crucial to a college student who has to take notes...

Thank you!! :D

OneDrive not working properly

Posted: 22 Nov 2014 04:58 PM PST

Split from this thread.

This happened to me when I installed Office 365 on my laptop. Onedrive works fine on the laptop, but not on any of the other PCs - where it used to work fine before.

I had been quite happy with OneDrive, but I guess I'll be looking for another alternative as I have no intention of paying through the nose to subscribe to 365 and I think the whole idea is to force people onto 365 and subscription payments.

MS OFFICE HOME AND STUDENT 2013

Posted: 22 Nov 2014 03:38 PM PST

I WAS ABLE TO GET MS EXCEL TO MY DESTOP, BUT WHEN I TRY TO GET MS WORD TO MY DESKTOP THE MESSAGE "WERE SORRY, BUT WORD HAS RUN INTO A PROBLEM PREVENTING IT FROM WORKING CORRECTLY".

Microsoft Word - Where did all the Symbols go?

Microsoft Word - Where did all the Symbols go?


Where did all the Symbols go?

Posted: 22 Nov 2014 02:30 PM PST

I opened Microsoft word today and the symbol library seems a lot smaller. Lots of the symbols I usually use are missing. (Ex. Infinity and all Greek Letters)

Am I missing some key info? This is makes it difficult to finish what i'm working on, can someone help me?

Go Directly to Edit Online

Posted: 22 Nov 2014 02:20 PM PST

Is there a way to have documents open directly in "Edit in (Word, PowerPoint, Excel) Online" with out having to click on "Edit Document"?  This seems a redundant step as I can, from Edit Online then choose "Edit in Word, PowerPoint, Excel" from the Online editor.  Shouldn't documents just open oin the Online Editor automatically?

Thank you!

Alex

Windows 7 word doc issue

Posted: 22 Nov 2014 01:42 PM PST

Windows 7 word doc issue. Once saved and reopened the document either is missing all content or the document reopened with 1500 pages instead of 70? Some files are now completely missing and appear faded with zero data in them. Since these issues have arisen it takes nearly 20 seconds for a command to be responded to. Eg I write a word and 20 seconds later it appears. Any advice? Updates installed, tried in safe mode and word would not even open!

MS Word 2010.

Posted: 22 Nov 2014 01:21 PM PST

Hi All.


I have recently been tasked to work out who is working on what department and on what day and times, including night working and weekend working.


So, I have created a Word doc file with six boxes across with Date, Department one, Two, Three and then Nights and Overtime boxes too, then there are the boxes below which have to have the staff members name in it to show who is working where and when, these of course correspond with the row of boxes on the left dropping down with the days of the week, such as Monday, Tuesday etc covering the seven days.


This is all fine and easy to do, but, what I would like to do is be able to lock the base template with the days of the week dropping down on the left from top to bottom, and the other boxes that have the respective departments to identify them so that none of them can be moved. (Please See Picture Below)


I would ideally then like to be able to draw small boxes and put the staff members names in which can then be locked to that small box so that I can then just drag the boxes with their names in onto the relevant departments instead of having to cut and paste their names all the time, or type them into the boxes as well.


Is there a way this can be done please?


I know Word has come a long way since it's inception, but I am hoping it can be done in Word rather than have to use Excel or something.


PS I have to work with what I have got, so buying other software programs is out of the question.

I appreciate any help or suggestions anyone has


Thanks again.


Peter.



Microsoft Word Office 2013 - Reviewing Pane

Posted: 22 Nov 2014 08:57 AM PST

Where is the color for author on reviewing pane?

Imagine more  than 10 people commenting and you want to tracking one particular author?

Dont suggest me to hide other author, cus there will be insertion on top of new insertion.

Pls enlighten

Otherwise, give user free option to downgrade to word 2010

Word Normal Margin

Posted: 22 Nov 2014 08:54 AM PST

I have Microsoft Office online.  When opening new blank Word document margins are not set to norm, i.e., 1"x1"x1"x1".  There is a 1' left & right but none top & bottom.  When selecting a different margin setup from drop down it will change the left and right but not the top & bottom.

Unable to open Word document because of end tag/start tag mismatch error

Posted: 22 Nov 2014 07:43 AM PST

I have gone through quite a few of the previous posts on here and have not been able to fix my document.

I keep on getting the same error, and am completely un-aware of how to deal with XML.

It firstly says 'The XML data is invalid according to the schema', then says 'The name in the end tag of the element must match the element type in the start tag. Location: Part: /word/document.xml, Line:2, Column: 8851972'

Would someone be able to take a look at it for me? It's my dissertation and it's due in a few days :(

https://www.dropbox.com/s/h49ol08buh595nj/Draft%201.docx?dl=0

Thank you so much!

I can't find word in office 365

Posted: 22 Nov 2014 06:26 AM PST

I have purchased office 365 and installed it. I can find excel on the start menu but I can't find anything else, such as word.  Can anyone help me to find it?

MS Windows 8.1. Laptop.

How can you get Management to support and fund Word/Excel training for their team

Posted: 22 Nov 2014 04:41 AM PST

Thought I'd ask this on the Microsoft Community forum.

Many places of employment refuse to send their staff on IT training for Microsoft Office products, and expect everyone to struggle on. Or, they send one person who then "passes on" parts of what they have learnt to other team members. 

The problem with the "passing on" method is that the trainee may not have understood or taken on board all that was taught to them, so any errors are compounded.

So - Imagine that you work in an office environment, but you're the only one with formal training for Microsoft Office. You recognise that other staff could be more productive (quicker - less errors) and produce more professional documents if they undertook a training course, such as European Computer Driving Licence (ECDL). The problem of being the trained individual being that one can constantly be receiving requests of "How do I" when concentrating and trying to complete own tasks.

How do you get the manager (who refuses to consider training) to recognise that they have no idea of what Word and Excel can actually do for them? And that their refusal to go on training or approve training for others is preventing the team from producing professional looking documents quickly with high productivity turnover (more work being achieved).

Would love to hear your comments

font calibri

Posted: 22 Nov 2014 02:08 AM PST

I need to now if calibri font was already available to the market in april 2004, and with which office pack.

That's to say, is it possible that a letter in calibri font was written in april 2004?

thanks for help,

marta

Word for iPad Recents Menu

Posted: 21 Nov 2014 09:02 PM PST

In the recents menu, some file icons have a check mark in the lower right corner and others do not.  Why is that?  What does the check mark indicate?

Page Layout, Landscape isn't really Landscape

Posted: 21 Nov 2014 04:43 PM PST

Two page document, when opened it is obviously Landscape but the Orientation shows it is Portrait. When changed to Landscape it narrows about 30% and is even more narrow than it would be if it were Portrait. Two of us have looked at this document and cannot figure out 1) how this could have happened in the first place and 2) how to fix it. Worst case, first thing Monday morning I will recreate the document, it will not be difficult. Has anyone else ever seen this happen before? If yes, were you able to fix it and how? This is at work where we still have Office 2007. I've tried to recreate it at home with Office 2010 but am unable to.

Show Comments is grayed out in Word 2013? Comments are always showing!

Posted: 21 Nov 2014 04:21 PM PST

Okay, so I consider myself pretty proficient in Word (and Office in general) - I even teach courses in it at a local college.

However, I have never come across this issue before - I don't know if I changed a setting or did something silly, but the Show Comments (under the Review tab --> Comments group) is grayed out.  The comments are all showing on the right margin as if Show Comments was enabled.  However, the only way I can get them to go away is by deleting all the comments.

I just started a new document to see if it was a single document issue, but the same problem exists there.

Any ideas?

Thanks,

John