Pages

Search

Microsoft Word - can not delete a word from a word document above the foot note

Microsoft Word - can not delete a word from a word document above the foot note

can not delete a word from a word document above the foot note

Posted: 24 May 2014 12:52 PM PDT

Hello

I have a letter and a word above the foot note section which I can not delete or choose in a word document.

Any advice?

Thanks

Miki

Insert Object - CSV file

Posted: 24 May 2014 10:54 AM PDT

Hello there,

I am trying to insert a CSV file in my word 2010 document.

I have tried it using both

'Insert Object - Create from File - Display as Icon' and

'Paste Special'

However in both scenarios, word is inserting CSV file as xls file - which messes up formatting of first column.

Here is the content of my CSV file:

"FILENAME";"DESCR"
"MyFile.pdf";"This is a sample pdf file"

When I try to open the CSV file after inserting it as an object in my word document -

Quotes goes missing for first column :-)

Can anyone please guide how can I insert my CSV file as text file which opens in notepad.

Thank you!

How to reset Column Defaults in Word 2010?

Posted: 24 May 2014 10:21 AM PDT

Very often, I use Word 2010's columns feature to reformat text into two columns, usually because I find it easier to read large quantities of text in columns. 

Each time I do this, I use Page Layout|Columns|More Columns to reset how the columns appear in two particulars:  First, I reset the space between columns from 0.5" to 0.2" and then I select "Line between."  For me, this is the optimal 2 column layout. 

However, I cannot find an option of that screen to make these the default settings for "Two Columns" (the easy choice on the dropdown list from Page Layout|Columns). 

Because I do this essentially every time I use columns, it seems to me there should be a way I can have Word 2010 simply apply these as the defaults when "Two Columns" is selected under "Page Layout|Columns."  But I cannot figure out how to do that.  On the screen presented under Page Layout|Columns|More (where I make these changes), I find no option for making these the default formatting choices for 2 columns.  I also tried looking under File|Options|Display and File|Options|Advanced, but didn't find a place to make these default changes. 

Is there a way I can set my Word 2010 so that, when I select "Page Layout|Columns|Two Columns" the two columns will be set with 0,2" spacing and a line between them?

Thanks,

Paul

Word freezes when using Find/Replace while connected via WiFi but NOT when connected by network cable. Similar problem with Outlook.

Posted: 24 May 2014 10:20 AM PDT

This is just so bizarre.  I have a Lenovo laptop.  Just 2 years old and pretty powerful.  I do high-end CAD work so it's a powerful laptop.  32G RAM, etc. Using Office 2013 on Windows 7.

When I am plugged in via an Ethernet cable to the Internet, Word and all of office works beautifully. As soon as I am either offline or using a WiFi connection, Word freezes up when using the Find/Replace command.  This doesn't seem to happen with any other dialog box.

I have tried with an existing file and with a new document. I have tried with the laptop on a power source and off.

Similarly, I find that when I try to open Outlook when on WiFi, it also freezes. In both cases if I run Word or Outlook in safe mode, they work just fine.  I can find and replace.

This seems to have started when I created a new family mail account at outlook.com so I could have a family calendar. I have had a personal live.com account for a long time and never saw a problem there. Can there be an issue with Exchange ActiveSync? Does Word continually try to connect to my account?

While safe mode is work around, it isn't great if I want to be productive.  I work from home so I can plug in in my studio.  But if I want to work outside on a nice sunny day, everything becomes problematic.

Is this because my Ethernet connection is super fast but my WiFi is not (like when I am out of town and using a Verizon Jetpack for a connection)?  My wireless adapter's driver is up-to-date.

Anyone have a clue?

Chris

Address Book

Posted: 24 May 2014 09:11 AM PDT

How to access my address book in Office Starter 10.

aligning radio buttons

Posted: 24 May 2014 08:55 AM PDT

My inserted radio button has its bottom aligned with the line it is in, instead of center aligned.

When having inserted a radio button, in design mode, right-clicking the radio button, choosing OptionButton Object > Edit, I get ancrosshair which I thought, indicated the ability to move the object around freely, but when I try to do so, the moved object jumps back to its original position after some seconds.

Another problem is the alignment of the radio button itself and its text.

Any ideas?

Customizations lost

Posted: 24 May 2014 08:25 AM PDT

Just recently, I have realized that Word no longer opens up the way I have set up (Body Text, 12 pt font, web view display), but the default way. Also, my tweaks of Headings (1, 2, & 3) are gone—back to default. The first thing I noticed was that a macro to print just one copy of the current document, on my QAT, is no longer working. I get an error message that it cannot be found.

 

OK what do I do now? Is it possible that my template has been deleted or corrupted? Or what?????

Microsoft Word

Posted: 24 May 2014 08:06 AM PDT

Hello,

I am a student studying for my A levels which start in less than 2 weeks. I have Windows 8.1, and also Microsoft Student 2013. I went to finish off my revision notes and Microsoft Word will not open at all, nor will any of the other programmes. I have checked my files, and none of them are corrupt. I try and open a fresh document and it will not even open! Please can someone help me?

*** Email address is removed for privacy ***

Size of converted files

Posted: 24 May 2014 08:00 AM PDT

I am producing a travel eBook using Word 2010 with text and a quantity of photographs - I have formated the entire text and have compressed the entire .jpeg photographic content to 96pixels for each photograph within the book in accordance with the required proceedure. In order to upload my files to the eBook distributor in Word.doc I have to produce a file size no greater than 10 MB- Question - The total file size in Word .docx formatt is 5.74 MB - When I convert to Word .doc file format ( Word 97/2003 ) the file size increases by a factor of around Five ( x5) to 27.8 MB - Why is this? And is it possible to further compress the Word .doc file to below the required 10 MB ? URGENT HELP REQUIRED!

Reactivate Word 2010

Posted: 24 May 2014 07:14 AM PDT

HOW DO I REACTIVATE MY MICROSOFT WORD 2010?

***Title added for clarity

***How to create a FORMATTING template for Microsoft Word 2013?***

Posted: 24 May 2014 07:09 AM PDT

Hello there,

I am formatting a bunch of large Word documents, and am at the last stage - changing the format, i.e. font, indents, bold/italics, etc...

I have to do this for all 9 HUGE files. 

==> Is there a way for me to edit one piece of my work and then use that format template for the rest of the documents? That will save me DAYS of work.

So for example can I edit one half of my document with the exact indents, boldness, font size, etc, manually, and apply that to the other documents so I can just copy/paste for example into that format?

Thank you,

Unable to save

Posted: 24 May 2014 07:08 AM PDT

Doug.

thanks for replying.

I have been using the Word 2010 for years. It's on a new computer. It will not let me save. On my wife's side of the computer, she can save all daylong.

any suggestions?

I have office 2013. In tidying up I uninstalled office 2003 thinking it redundant, and now I cannot access Word 2013. I do have a product key. what should I do3

Posted: 24 May 2014 05:04 AM PDT

I have office 2013.     In tidying up I uninstalled office 2003 thinking it redundant, and now I cannot access Word 2013. I do have a product key. what should I do

How do we give SpellCheck corrections or additions?

Posted: 24 May 2014 04:59 AM PDT

I love Microsoft Answers, and appreciate ho ready so many people are to help when people get stuck or have questions.

Sometimes, however, you (I) want to give feedback that doesn't need a whole discussion,as it is something that has been missed by the programmers and just needs adding in - after evaluation of course.

For example (this is just one of many I could submit): the word "undwear" is incorrect, but SpellCheck seems unaware of the correction which is "underwear".

I don't believe this is a case where use of the custom dictionary is appropriate, and would rather let the SpellCheck team know about this so they can take appropriate action.

The 2013 version of SpellCheck is significantly better than previous versions in the detection of errors, even if I don't always agree with some of the suggested corrections (95% of which are spot on). I do quite a bit of CopyEditing and this latest version is a pleasure to use, apart from some really irritating technical glitches.

I would love to be able to contribute to SpellCheck becoming even better.

Any thoughts?

cannot open microsoft office

Posted: 24 May 2014 01:56 AM PDT

I cannot open microsoft office.  I get an error that says: SOMETHING WENT WRONG, WE COULDN'T START YOUR PROGRAM.  PLEASE TRY STARTING IT AGAIN.  IF IT WON'T START, TRY REPAIRING OFFICE FROM 'PROGRAMS AND FEATURES' INT HE CONTROL PANEL.

i HAVE REFRESHED..REBOOTED..TURNED OFF...RESTARTED MY COMPUTER...I have did a system recovery point to prior to the time i started getting this error..nothing has worked...not sure what o do from here..i have my disssertation in progress saved in microsoft word..and many other important files.  thank you for your assistance int his matter

rita sell

dwm memory leak with Office 2013 on a dual monitor system

Posted: 24 May 2014 01:06 AM PDT

When I have a window from the office 2013 suite active on my secondary monitor, it causes dwm.exe to use far more memory than it should, and when working with large files (eg, a 60-page report or a 60-slide presentation), this often leads to windows detecting low memory and then automatically disabling aero. I notice that this issue only occurs while the document is stationary - if I move it around on the screen or scroll up/down within a document/slide show, the memory usage will drop considerably (to close to the base usage, around 50MB) before rising again.

Is there a known fix for this issue (apart from just not using office on my secondary monitor - I often have two office windows open at once etc.)?

I have 8gb RAM installed on a system with Windows 7 64x, and aero is disabled when dwm.exe reaches about 1.5GB ram usage.

Word 2013: Welcome Back Pop-up Window?

Posted: 23 May 2014 08:00 PM PDT

In Word 2013, when I reopen a document that I have been working on, I get this
pop-up window that says "welcome back, etc, etc".  I don't really care for it
and am wondering if there is a way to shut the pop-up off?

Thanks for any insights/suggestions.

gumboman

Changing system table formats

Posted: 23 May 2014 07:56 PM PDT

I want to link data from Access to a Word document with a certain table format.

The problem is that I can only get system-defined table formats for my table.  None of these work for my situation.  And, every time I update the link, the table reverts to the system defined table format even if I change the format manually.

I tried defining my own table format (but it won't save as a system format and hence I cannot use it in the "Insert Database/Table AutoFormat" window).

I tried redefining a system-defined table format (but it does not seem to save those changes).

Is there a way around this problem?

Thanks

Using bookmarks in word 2010 email mailmerge

Posted: 23 May 2014 06:48 PM PDT

I have looked extensively on the internert for instructions for using bookmarks in a word 2010 email mailmerge without success. I have a news letter with 5-15 topics on a daily basis. I would like to be able to have an index at the top with "click here" after each one so that users can navigate to any topic and back to the index easily. Is this possible? If so, How?

Thanks!

Ben

Footer "blue dotted line" won't move down in Word document

Posted: 23 May 2014 05:04 PM PDT

I have a pleading (ruled and numbered paper) and I cannot get it to type to a certain point at the foot (line 28).  No matter what I change (using the ruler or the margins or page layout alignment (top) or "footer from bottom" measurements), nothing will get that blue dotted "footer" line to move down.  The footer itself will move down, but that does not help me type past the point I need.  Somebody did set up the caption of the pleading with columns and section break.  I usually just use a table.  I am wondering if this is the problem but it would be a huge deal to change it from columns to a table as everything in the documents starts to go wonky when I do that.

Does anyone know how to get that darn blue dotted line to move down with the footer text like it normally does?

Thanks.

Any smart way to chang text after : (colon) from italic to normal ?

Posted: 23 May 2014 03:56 PM PDT

Hi,

Considering the following example:

SCOTT, P. Institutional World: An Alienated Life. New York: Penguin (2010).

Is there any way to change "An Alienated Life" from italic to normal using any smart way?

At the end, just Institutional World: should be italic. Example:

SCOTT, P. Institutional World: An Alienated Life. New York: Penguin (2010).

The issue is that I have 20 pages which sums around 300 references like that and I would like to select the pages and run some command, a macro, a smart find/replace that somehow could identify=>

1- if there is text in italic

2- if this text has a colon : in between the words in italic

3- then change what is in italic and after the colon : to normal text

Such kind of magic would change my life :)

Many thanks!

Carlos

MS Word VBA to insert copied portion of a document below the current page

Posted: 23 May 2014 03:53 PM PDT

Hello,

I have a macro that copies a body of text and places it into a new section at the "bottom" of the current document.  (See SAMPLE CODE below.)

The macro is connected to a Macro Button that is part of a locked MS Word 2010 macro enabled template.

I am attempting to create a similar macro that will copy a body of text and place into a new section "directly below" the section that contains the macro button.  Can I modify the existing macro to do that?

I assume I need a way to have the macro set the insertion point below the macro button so that the page will paste in the proper location.

Any assistance will be appreciated.

Thanks

------------------------

SAMPLE CODE

Sub CreateNewProgressNotePage()

'Code below unlocks the original document
 If ActiveDocument.ProtectionType <> wdNoProtection Then
    ActiveDocument.Unprotect
 End If
 
'Code below selects the text between two Bookmarks in the document
 Dim oRng As Word.Range
 Set oRng = ActiveDocument.Range
    oRng.Start = ActiveDocument.Bookmarks("P_Start").Range.End
    oRng.End = ActiveDocument.Bookmarks("P_End").Range.Start
    oRng.Select
   
' Code below will Unhide the selection
With Selection.Font
        .Hidden = False
End With
   
' Code below copys the selected text
 Selection.Copy
 
' Code below will Hide the selection again
With Selection.Font
        .Hidden = True
End With

' Code below navigates to the end of the document and creates a section break
    Selection.EndKey Unit:=wdStory
    Selection.InsertBreak Type:=wdSectionBreakNextPage

 
' Code below pastes what was copied earlier
 Selection.PasteAndFormat (wdFormatOriginalFormatting)
 
' Code below relocks the original document
  ActiveDocument.Protect Type:=wdAllowOnlyFormFields, NoReset:=True
 
' Code below navigates to the End of the Document

    Selection.EndKey Unit:=wdStory
    Selection.MoveUp Unit:=wdScreen, Count:=1
 
 
End Sub

Installing Office Enterprise 2007 via GPO to XP over Office 2003 - Microsoft Office forums

Installing Office Enterprise 2007 via GPO to XP over Office 2003 - Microsoft Office forums

Installing Office Enterprise 2007 via GPO to XP over Office 2003

Posted: 27 Nov 2006 06:14 PM PST

Bob,

Thanks for the incite. I wasn't sure about the MSP files, and how they
applied to MSIs. I'm still curious why the installation didn't go very well
via Group Policy. I'll start fresh and try again.

I wonder if this is the first step by MS to move away from .msi's for
software deployment?

"Bob Buckland ?:-)" wrote:
 

Transfering software to a new PC

Posted: 27 Nov 2006 01:11 PM PST

As long as the Office Suite is not an OEM version, uninstalling and
reinstalling is not a problem. You MAY have to call MS to activate depending
on how long it is since the previous activation. You will be prompted with
the correct telephone number when you get to the activation part of the
install: it is a locale specific number. This has never been a problem for
me. You can temporarily skip activation and use Office 50 times before it
shuts down to reduced usage when you will have to call MS.

If it is an OEM version, it is non-transferrable.

--
Terry Farrell - MS Word MVP

"DL" <address@invalid> wrote in message
news:phx.gbl... 

Problem going back to Office 2K from Office 2007 ...

Posted: 26 Nov 2006 10:12 PM PST

Please don't use CCleaner. That thing breaks Office 2007 when you ever
try to reinstall.
There is a reason why the steps are detailed and explicit. Anything
beyond those steps should not be used.

Patrick Schmid [OneNote MVP]
--------------
http://pschmid.net
***
Office 2007 RTM Issues: http://pschmid.net/blog/2006/11/13/80
Office 2007 Beta 2 Technical Refresh (B2TR):
http://pschmid.net/blog/2006/09/18/43
***
Customize Office 2007: http://pschmid.net/office2007/customize
OneNote 2007: http://pschmid.net/office2007/onenote
***
Subscribe to my Office 2007 blog: http://pschmid.net/blog/feed

"-RS-" <com> wrote in message
news:phx.gbl:
 

Changing language in Office XP (Brazil Version)

Posted: 25 Nov 2006 02:54 PM PST


Try doing the following:
go to - start, all programs, microsoft office tools, microsoft office
xp language settings,
then change the "Default version of Microsoft Office" to english US or
whatever your preference is....

If this does not work, try reading an earlier post of mine which may
help by searching on "Outlook default language changes when replying to
e-mails"
Good luck.

DC


Milly Staples [MVP - Outlook] wrote: 

Cant install Office Professional 2003 due to error 1706

Posted: 25 Nov 2006 06:55 AM PST

oops,
sorry
that was a test post-sorry
Jeff
"Jeff" <nospam> wrote in message
news:com... 

Runtime error installing Office 2003

Posted: 24 Nov 2006 09:25 PM PST

there can be some f*ck up with MSI COM+ registration.

Try installing MSI 3.1 from
http://www.microsoft.com/downloads/info.aspx?na=22&p=10&SrcDisplayLang=en&SrcCategory Id=&SrcFamilyId=&u=%2fdownloads%2fdetails.aspx%3fF amilyID%3d889482fc-5f56-4a38-b838-de776fd4138c%26DisplayLang%3den

hth
g

"nitrousdave" <microsoft.com> wrote in message
news:com... 

Office 2007 Setup will not continue

Posted: 24 Nov 2006 06:37 PM PST

Hi D.T.,

There is a MS Knowledge Base article on that error message that includes many of the more common items that need to be removed.
http://support.microsoft.com/kb/927222/en-us?FR=1

The issue with Nero isn't part of that particular error.

============
<<"Dr. Technical" <microsoft.com> wrote in message
news:com...
To all:

I was successful finally in getting Office 2007 to install on my Vista
Ultimate machine. I ended up using the Daemon Virtual CD-ROM utility and had
to uninstall the Expressions Beta.

I will try re-burning the ISO images to CD-ROM using a slower write speed on
my Nero Ultra. I had just about come to the same conclusion as others: that
Nero running on Vista has some issues writing discs reliably.

Maybe I'm just a curmudgeon, but I wish that Microsoft would give us some
additional source of information when they display error messages with
cryptic phrases telling you to uninstall "associated technologies." If they
know what the "technologies" are, why can't they post a KB article telling us
what to remove? How many hours have been wasted by the collective community
trying to get this install to work, when a little official help could have
lowered everyone's frustration level greatly? I know the Community is a
great place to come for assistance, but there are so many strategies proposed
by so many users, it can be confusing and time-consuming to sort through to
find the ones that may meet your particular situation.

Just a thought...
--
Dr. Technical >>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Groove activation and Office Ultimate

Posted: 24 Nov 2006 06:06 PM PST

Argh! I hope that's not the case this time. Espicially w/ all the problems
going on w/ activiation.

Also, I did find Office Professional Plus 2003. Quite a bit more apps than
the regular professional. Found on MSDN.

Thanks.
-Michael.

"Terry Farrell" wrote:
 

Using Office 2003 and Office 2000

Posted: 24 Nov 2006 10:05 AM PST

Thanks for the help. With the fact that our OB 2003 is not the "upgrade"
version... If we uninstall OB 2003, install O2kPro, and reinstall OB 2003,
will OB 2003 automatically "overwrite" the word, excel, outlook, and all
other pertinent components of O2kPro? Basically, after uninstalling OB 2003,
should we install our retail version of O2kPro (in full), before reinstalling
OB 2003, or install O2kPro without the word, excel, and outlook components?
Since the two versions of office will be in different folders, would we not
end up with two installations of word, excel, and outlook?

"JoAnn Paules [MVP]" wrote:
 

Installing office 2000 on the computer

Posted: 24 Nov 2006 06:09 AM PST

I ended up copying the installation CD into my Program file, and now it works
all right. Thank you
--
Renee


"JoAnn Paules [MVP]" wrote:
 

Make web links to spreadsheets open in Excel

Posted: 21 Nov 2006 01:52 PM PST

That fixed it, thank you. I thought I was going insane looking everywhere
for this setting.



"Susan Ramlet" wrote:
 

resource name won't capitalize Microsoft Project

resource name won't capitalize Microsoft Project

resource name won't capitalize

Posted: 16 Jun 2005 01:00 PM PDT

egs --

By chance, does your spell checker in Microsoft Word automatically correct
"Theo" with "theo"? If so, the spell checker in Project uses the spell
check information specified in Word. Let us know.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We wrote the book on Project Server"


"egs" <microsoft.com> wrote in message
news:com... 

Resource Allocation & Resource Sheet...

Posted: 16 Jun 2005 12:40 PM PDT

I believe part of my problem was that I was not realizing that the
total hours for the task are computed when the first resource is
assigned (at least that's what it's looking like to me). Still stumped
on why the time increased... The time / task relationship is what is
giving me the hardest time...

I used a 24hr calendar for a task, and then assigned a resource with a
10hr schedule, no weekends, to it... I was hoping that the task
duration would increase since that resource could not work on the
weekends. Is there a way to accomplish that or do I need to change
each task's calendar to coincide with the allocated resources?




Gérard Ducouret wrote: 

Same Resource in Master Schedule?

Posted: 16 Jun 2005 10:05 AM PDT

Excellent. My problem was that I set up my individual projects before
setting up my master. I think that the best way to go about this is to:
1. Create the master schedule with all resources.
2. Create the sub schedule
3. Assign that the sub schedule use the resources from the master

It's all so simple now. Thanks for your help!

"Gérard Ducouret" <fr> wrote in message
news:#pl$phx.gbl... 

Can I disable the automatic changing of Duration?

Posted: 15 Jun 2005 10:15 PM PDT

Jumping in, I can 't think of any circumstance at all. There's the joke
that says when you interview a candidate for an accounting job, the one to
hire is the guy that answers "What would you liike it to be?" when you ask
him "What's 2 plus 2?" In the real world I would never, ever, under any
circumstance want a program to tell me 2+2 is 5 or that when working an 8
hour a day, 5 day a week calendar there are 24 hours of duration in a task
that starts July 1st and ends August 1st. Neither is mathematically valid -
they're just plain wrong - and one of the reasons for using a program like
MS Project is to short-circuit the human propensity for self-delusion. A
useful program is one that stubbornly refuses to give me wrong answers no
matter how badly I want them .
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"John" <com> wrote in message
news:microsoft.com... 

Print a range of pages of a gantt

Posted: 15 Jun 2005 04:25 PM PDT


Hi refreshe ,

Welcome to the Microsoft Project newsgroup :-)

Please see FAQ Item: 44. Printing Problems

FAQs, companion products and other useful Project information can be seen at
this web address: http://www.mvps.org/project/

Hope this helps - please let us know how you get on:-)

Mike Glen
Project MVP



refreshe wrote: 

Linked Information

Posted: 15 Jun 2005 11:47 AM PDT

I know in Project 98 I can double click on the cell and it takes me to the
other "side" of the link.


"Peter" wrote:
 

Analyse Timscale data problem

Posted: 15 Jun 2005 09:15 AM PDT

In article <com>,
"Philg" <microsoft.com> wrote:
 

Phil,
Are you saying, you can't export hours? If so, I don't understand. I
thought you were the one running the utility and if so, you should be
able to export hours, days or whatever.

Just for reference a 470 line schedule is not large but 140 resources on
that size schedule is rather unusual. Did I read your post correctly
that the difference between the timescale values shown in Project and
those exported to Excel is a NEGATIVE 700 man-days? What does the
statement, ". . .the error's are within approx 18 of the activities"
mean?

In your "fix" process what view are you cutting/clearing/pasting
resource name data? And what exactly does that do to "fix" what is
exported by the utility?

Your explanation provides more information but I'm afraid it raises more
questions than it answers. I understand that describing a problem that
is very clear to you isn't always easy to relate to someone else.
Sometimes it's a "forest versus trees" kind of thing - you see the trees
but all I see is a forest. Perhaps a more detailed explanation or a
sample of what you are getting would be of more help.

John
Project MVP

Shortest possible duration

Posted: 15 Jun 2005 08:42 AM PDT

As Jan said ... But also an aside the task types such as "fixed work" or
"fixed duration" really only have meaning when you are editing the
assignm,ents of resources already on a task. The magic formula is
Work=Duration * Units. It has a constant term, an independent variable that
you are editing, and a dependent variable that Project is calculating. Task
type simply tells Project which term should be held constant when you edit
one of the other terms, thus indirectly telling it when you edit, say, a
resource's units whether it should recompute the work or the duration for
you.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Barny Blue" <microsoft.com> wrote in message
news:com... 

"File Not Found" Error

Posted: 15 Jun 2005 08:02 AM PDT

In article <com>,
"roadkill" <microsoft.com> wrote:
 


Will,
What article? You lost me.

John

server migration

Posted: 15 Jun 2005 07:26 AM PDT


You're welcome, Cecelia and good luck! :-)

Mike Glen
MS Project MVP





Cecelia wrote: 

Project to Visio

Posted: 15 Jun 2005 02:41 AM PDT

Hi Steve,

thanks for the addition. I'd also like to add, that if you do not
necessarily need Visio, you can create a WBS Chart with WBS Chart Pro:
http://www.criticaltools.com

Regards,
Renke

--
Renke Holert

Allocatus - Linking MS Project with Outlook and Notes
http://www.allocatus.com

Project - Das Profibuch
http://www.holert.com/project/profibuch

"Steve House [Project MVP]" <send.hotmail.com>
schrieb im Newsbeitrag news:phx.gbl... 

How do I use customized fields in reports?

Posted: 14 Jun 2005 08:18 AM PDT

My mistake, Evie. In the Cash Flow report, you don't get to choose
custom fields. You'd have to figure out how to get what you want in one
of the fields available in the report, like Cost. Or use a different
report which does allow you to select a table.

Evie wrote: 

hourly activities

Posted: 14 Jun 2005 06:48 AM PDT

thank you, it worked
Maurizio

"Gérard Ducouret" wrote:
 

How to see details of link to Excel spreadsheet cell?

Posted: 13 Jun 2005 06:30 PM PDT

In article <phx.gbl>,
"G Lykos" <com> wrote:
 


George,
You're welcome.

John

Setting tasks to fix duration moves the start & finish dates

Posted: 13 Jun 2005 02:57 PM PDT

The only controls you have on the critical path are indirect controls where
the path is affected by the decisions you have made regarding task
sequencing and their durations if, and that's a very big "if," you can
actually control the duration. IF a painter can apply paint at a maximum
rate of 10 square feet of wall per hour, you have 250 square feet of wall to
paint, and only one painter to do it with, that pretty well puts that task
duration out of your control - it's going to be mighty close to 25 man-hours
of effort required and the duration will be 25 working hours if the painter
is fully committed and more than that if he only can devote part of his
energy to that specific task.

As Mike said, there is no difference in deleting a task on the critical path
from deleting one that's not on the critical path - you simply delete it.
Adding a task is equally simple but it may or may not end up a critical task
or on the critical path. IMHO, task linkages are dictated by the nature of
the physical processes involved in creating the task deliverables. Erecting
walls is a predecessor to installing rafters not because we want to
structure the work that way but rather because the law of gravity doesn't
give us the option of setting the rafters in midair and then stuffing the
walls in under them later. Another rule is that all tasks in the project
will have at least one predecessor and one successor, except for the start
and the end milestones. If a task has no other direct successor, it will
still have the finish milestone linked to it. When your project is
structured like that you will find there are usually multiple paths leading
from the start to the end - one of them will be the longest of the
alternatives and that is the critical path by definition. If the task
you're adding belongs in that sequence due to the nature of the deliverable
inputs it requires and the outputs it produces, it will add to the critical
path. If it doesn't fit into that sequence of operations according to the
nature of the physical process itself, then it doesn't add to the critical
path. That's why I say you don't choose it - the structure of the project
is pretty well something that is dictated by the nature of the work
processes and as a PM part of our job is to discover the most efficient way
of getting it done. Notice the operative word is "discover." It is a
process of discovery, not an imposition of our will. Our will comes into
play when we're defining the goals but once we decide what we want to
achieve, we then discover the best way of achieving them.

--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"peterdelorme" <microsoft.com> wrote in message
news:com... 

Using MS Proejct 2003 with Server

Posted: 13 Jun 2005 12:12 PM PDT


You're welcome, Ralph, and good luck! :-)

Mike Glen
MS Project MVP





Ralph Suozzi wrote: 

Microsoft CRM - Execution project for client. (Migration and deployment related)

Microsoft CRM - Execution project for client. (Migration and deployment related)

Execution project for client. (Migration and deployment related)

Posted: 20 Jan 2005 04:02 AM PST

Matt thanx for your answer!
I will play with redeploy.

About backups.
I want to be able to restore previous state of whole CRM system as it
was before import customization in case something goes wrong during
import process. So i need what exactly i need to backup. I played with
database backup. And you wrote "Thus, if you restore the database, you
will wipe out any customizations you imported from the other system"
but in my case nothing with it. All customization still in system after
restoring :( It makes me to thing that buckup and restore only database
is not enough.

Problem with browsing CRM pages

Posted: 20 Jan 2005 03:06 AM PST

There have been some customization, but not in these files. Additionally i
Have even reinstall whole application and it didn't help, (IIS has also been
reinstalled)

Luke

Uzytkownik "Matt Parks" <com> napisal w
wiadomosci news:com... 
when 
changes 
<pl> 
stops. 
into 
cancelled 

Multiple CRM Installations in one domain?

Posted: 19 Jan 2005 02:07 PM PST

Sorry - I missed the bit about Exchange. We are not using Exchange at all in
our second environment.

Gill
www.opsis.com.au

"Matt Parks" wrote:
 

Attachments within KB (Knowledge Base)

Posted: 19 Jan 2005 01:53 PM PST

afraid not

you cannot add notes to a kb article. You can add comments but these do not
let you add attachments

I hope this helps

Andreas Donaubauer
MCP seit 1999, MCSE, MCSA
MVP für CRM
andreas[at]donaubauer.com
www.crmfaq.de



"MichaelCWest" <microsoft.com> schrieb im
Newsbeitrag news:com... 
into 

Reporting out of CRM

Posted: 19 Jan 2005 11:35 AM PST

Dave,

Are you saying you installed Crystal 10 on the CRM Server? If that's the case,
the only way to get the CRM reports working is to re-install the CRM App server.
You may be able to get around this with some help from support, but somehow I
doubt it.

The version of Crystal that is installed with CRM is a modified version. Thus,
the standard Crystal install can't be used. The enhancement CD is only for use
with the developer and should NOT be used on the CRM Server.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Wed, 19 Jan 2005 11:35:39 -0800, "Dave Koleno"
<com> wrote:

We installed Crystal Reports 10.0 a few months ago not
knowing that it does not interface with CRM. We have now
taken 10.0 Enterprise off our server and reinstalled 9.0
Enterprise. However, for some reason the server is not
recognizing 9.0 and we cannot start the CMS. When we try
to reload the CRM Crystal disc, it says that we need to
upgrade to Crystal 9.2.2. However, when we were using
9.0 before, there was no problem. Does anyone have any
idea how to get the reporting through CRM back up and
running.

Saved Chnages do not display

Posted: 19 Jan 2005 11:13 AM PST

In English version of CRM, you'll be looking for the Deployment Manager on
the CRM server. Then follow Carlos' instructions on publishing your
customizations. However, you will also need to issue an iisreset from the
command prompt after doing this. (On CRM server, go to Start > Run. Type cmd
and hit enter. In the DOS-like window that opens, type iisreset and hit
enter. This will stop and restart your internet services and your
customizations will then be visible. You will want to do this when there are
no users in CRM, or they will need to close and re-open CRM to avoid
application hangs.)

Matt Wittemann
http://icu-mscrm.blogspot.com


"Mark" wrote:
 

Transfer Activities

Posted: 19 Jan 2005 05:15 AM PST

Short answer: no.
Long answer: you don't need to freak out on pricing. Ask them for a 15-day
eval license after you download it, get moving on it, and uninstall. They
uninstall quite nicely and doesn't adversely affect the server (short of a
reboot sometimes).

"Paul McBride" wrote:
 

Saving documents to MS CRM from eg Word?

Posted: 19 Jan 2005 02:39 AM PST

You could have a look at the IBF for CRM.

http://www.microsoft.com/downloads/details.aspx?FamilyID=332beffb-4492-40d7-8ce0-995489909b6a&DisplayLang=en

"Siggi" <is> wrote in message
news:google.com... 

CRM 2005

Posted: 18 Jan 2005 11:30 PM PST

Yep... We need 2005 ASAP.


"Matt Parks" <com> wrote in message
news:com... 

OR Filter Criteria

Posted: 18 Jan 2005 09:05 PM PST

Yes, but not through the CRM UI. This can be done via the CRM SDK which
exposes more advanced search functionality than is available in the UI.

Eric Hood

"Darius Gasiorek" <de> wrote in message
news:%234iiYqg$phx.gbl... 
colon 
field 

External E-mail to POP3 Connector Manager to CRM

Posted: 18 Jan 2005 06:57 PM PST

Hi Peter,

Thanks for your reply. I've got the problem solved and it works =) Its
really my mistake. Some of the mails are lost because of Qmail configuration.

"Peter Lynch" wrote:
 

exceeds the SQL Server row limit of 8000 bytes

Posted: 18 Jan 2005 02:03 PM PST

You will need to find someone with .Net development skills to help you with this
then.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Wed, 19 Jan 2005 08:49:03 -0800, "Sylvain."
<microsoft.com> wrote:

Hi,

i'm not an expert of Microsoft CRM and Microsoft SQL but how can I add a new
table and build my own page?

Thank,

Sylvain.

"Matt Parks" wrote:
 

upgrading to Microsoft CRM 1.2 Server (Russian)

Posted: 18 Jan 2005 03:25 AM PST

Hello, Matt!
You wrote on Tue, 18 Jan 2005 10:42:17 -0600:

MP> I would look into the Redeployment tools available from MBS. This will
MP> allow you to export your data and import it into a new installation.

MP> Hello, All!

MP> We are using the Microsoft CRM 1.2 Server (English). In the nearest
MP> future we are planning upgrading to Microsoft CRM 1.2 Server (Russian).
MP> How can we upgrade correctly without data losses?
Note Although the redeployment tools for Microsoft CRM version 1.2 are
available only in English, they can be used to

redeploy other language versions of Microsoft CRM. For example, these tools
can redeploy an original Spanish Microsoft

CRM implementation to a new Spanish implementation. They cannot be used to
change languages originally used in an

implementation; that is, they cannot be used to redeploy an original Spanish
implementation to a new Italian

implementation.


With best regards, Alexey Tomashevskiy.
Subscribe to: Posts (Atom)