Cannot format disc to install FC4 - Forums Linux |
- Cannot format disc to install FC4
- connecting 2 da net
- Margin adjust, CUPS, HP PSC 1350
- laptop Q re ethernet card / pcmcia card?
- Two questions - video driver and adding a new compiler to path...
- Zipslack and ISA
- Monitor locks up on installation reboot.
- Suse 10.0 fortran & multimedia
- Ubuntu on VMware
- wheel mouse not working
- Suse 10.0 problem
- Problems installing Fedora Core 4 on HP a1340n Media Center PC
- Wireless association problem
| Cannot format disc to install FC4 Posted: 05 Feb 2006 07:08 AM PST Nico Kadel-Garcia wrote: I accordance with the others suggestions and a LiveCD boot (please don't forget to run the md5 checksum on the d/led ISO image of whatever distro you choose, BEFORE you burn it and use it). If I'm not mistaken (and someone PLEASE correct me if I'm wrong in my 'dd' example) -- perhaps you should Zero out the drive (2 different ways); * Use MaxBlast (or whatever Maxtor calls their Zero-ing / Diagnostic utility) * Use 'dd' from a linux LiveCD boot dd if=/dev/zero of=/dev/hda bs=512 count=1 this should write a blank MBR/MPT to the disk -- then reboot and rerun FC4 setup It seems _perhaps_ that the Maxtor has either some 'hidden' OEM diagnostic partitions (Compaq/Dell/HP/IBM/Gateway, etc), or it was originally partitioned and formatted using DDO software (possibly Maxtors, or 3rd party). Whereas the dd command will clear the MBR, the Maxtor utilities will allow you to zero the _whole_ drive and check for bad blocks (I guess 'dd' can also + whatever the linux badblock utility is) |
| Posted: 05 Feb 2006 12:23 AM PST Dan C <lan> wrote: It seems to sporadically affect his stop and comma keys as well. I suggest a dose of castor oil. Peter |
| Margin adjust, CUPS, HP PSC 1350 Posted: 04 Feb 2006 09:08 PM PST In article <localnet>, Bill Marcum <com> wrote: I'm sure about the paper size, using US Letter. The margin clipping is not what I would expect from printing A4 onto letter. It's less than that. It's a maddening couple of millimeters off the top of the first line printed. Using the alignmargins program has not changed anything, no matter what values I put in. It is possible to print with some programs, becuause some things will set their own margins, but I can't us a2ps for example, because the clipping cuts off the left side (by 3 or four courier 10 characters in a landscape page). This is definitely not because cups thinks it's printing A4, although I appreciate that as a good place to start diagnosing. |
| laptop Q re ethernet card / pcmcia card? Posted: 04 Feb 2006 05:31 AM PST On Sat, 04 Feb 2006 13:31:06 +0000, Bock wrote: Yes. If you can't get teh internal NIC to work, or can't find a driver, try a PCMCIA NIC. The one I use on slackware is: 3Com Megahertz 10/100 LAN Cardbus PC Card model 3CXFE575BT other one will work too: http://www.linux.org/docs/ldp/howto/Hardware-HOWTO/pcmcia.html then config in /etc/pcmcia or where ever yours is. |
| Two questions - video driver and adding a new compiler to path... Posted: 03 Feb 2006 07:28 AM PST "Bill Marcum" <com> wrote in message news:eu.gntc.com... Depending on the software, you can also make a symlink for it to /usr/local/bin/ or to $HOME/bin/. In most setups, those locations are already in your PATH. |
| Posted: 02 Feb 2006 06:23 PM PST Buzzard <invalid.net> wrote: [ISA internal modem:] If you don't mind some advice: If you can't find a manual (or equivalent on the Internet), throw the card way, because it's not worth you time and pain. Replacements are cheap. Internal modems in general are (in my somewhat well-known view on the topic: see http://linuxmafia.com/~rick/faq/) problematic, and the only internal modems I'd even consider keeping would be ones that are self-documenting. E.g., where there are jumpers, I expect there to be a jumper diagram _right on_ the card. Separate documentation is never there when you need it, and tends to get lost. -- Cheers, Rick Moen "Anger makes dull men witty, but it keeps them poor." com -- Elizabeth Tudor |
| Monitor locks up on installation reboot. Posted: 02 Feb 2006 02:54 PM PST Thanks for replying. I am using a ATI Redeon Rage 6 video card, I think this is where the problem lies. I am also using a ECS 741GX-M Motherboard, a AMD Athlon XP 1666 MHz 2000+ CPU and I have 512 MB DDR PC333 ram. I used Fedora Core 4 and it worked. The same screen comes up for a second and then leaves. Thanks again for your help. |
| Suse 10.0 fortran & multimedia Posted: 02 Feb 2006 09:34 AM PST imotgm <yahoo.com> did eloquently scribble: For wmv and quicktime, yes, but for mpeg1/2/3/4 and real media, you don't need win32 codecs. -- __________________________________________________ ____________________________ | co.uk | | |Andrew Halliwell BSc(hons)| "The day Microsoft makes something that doesn't | | in | suck is probably the day they start making | | Computer science | vacuum cleaners" - Ernst Jan Plugge | ------------------------------------------------------------------------------ |
| Posted: 01 Feb 2006 03:59 PM PST Chris, You are right. It was running Ubuntu as a guest OS on a host XP VMware. Can I simply install with official Ubuntu 5.10 ISO image in VMware 5.5? |
| Posted: 01 Feb 2006 11:02 AM PST On Wed, 01 Feb 2006 19:02:52 +0000, keele.ac.uk <keele.ac.uk> wrote: Have you created the symbolic link /dev/mouse? It might be better to use Device "/dev/ttyS0" or "/dev/ttyS1", whichever is correct. If you're not sure which it is, type "cat -v /dev/ttyS0" and move the mouse. If nothing happens try "cat -v /dev/ttyS1". Or spend five bucks and get a PS/2 or USB mouse, unless your PC is so ancient that it doesn't have either of those ports. Even if that is the case, since you have gotten far enough to edit the XF86Config, there is a good chance you can get everything to work. /dev/psaux is the PS/2 mouse port. -- Every word is like an unnecessary stain on silence and nothingness. -- Beckett |
| Posted: 01 Feb 2006 08:43 AM PST paolino wrote: I can't swear to this: I'd have to take the firefox DNS related code apart. But think about it. When I set up a network connection, whom am I making the connection from in order to link to a website? Am I using my hostname, "whatever-you-selected"? OK, then what network port is associated with that? 127.0.0.1, or the actual IP of my external network port, and which of them should I use to make the outgoing connection? The surprise to me isn't that Firefox fails. The surprise is that Konqueror works. |
| Problems installing Fedora Core 4 on HP a1340n Media Center PC Posted: 31 Jan 2006 08:52 PM PST Fred wrote: whoops - I mean "Plug and Play OS" to OFF/No (in the BIOS) |
| Posted: 30 Jan 2006 09:26 AM PST Unruh wrote: As I seid, I set the essid and channel: iwconfig eth1 essid Office2 channel 1 and iwconfig shows the changes have taken place, but there is no MAC address and it notes unassociated (sorry laptop not here to copy exact text). That is exactly what two different HOWTO docs showed, all except the "you will then see a MAC address" part :-( Unless there are hidden non-printing characters, there's not a lot to miss on one line. There are no passwords to provide, none are used. Actual command was ifconfig eth1 xx.xx.xx.xx just as suggested by the HOWTOs, using the IP which is set aside. Yes, there's both fixed IP and DHCP, I can use either with a wire. -- bill davidsen SBC/Prodigy Yorktown Heights NY data center http://newsgroups.news.prodigy.com |
| You are subscribed to email updates from TextNData Forums - Linux To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
| Google Inc., 20 West Kinzie, Chicago IL USA 60610 | |
