Pages

Search

Microsoft Word - continuous section breaks, page numbers and headers/footers

Microsoft Word - continuous section breaks, page numbers and headers/footers

continuous section breaks, page numbers and headers/footers

Posted: 17 Dec 2013 03:19 PM PST

I have a document with several chapters, each chapter starting with Header 1. I have used STYLEREF fields in the headers to pick up the chapter numbers and names, and set the page number format to include chapter numbers. The page numbers run continuously, as you would expect – so I have page 1-1 to 1-7, then the next page, where Chapter 2 starts in the middle of the page, is 2-8, and so on. So far so good.
I was asked to start each chapter on page 1, so that after 1-7, the next page (where chapter 2 starts in the middle of the page) would be 2-1. So I inserted continuous section breaks, and told the page number to restart at 1. But now, after page 1-7, the next page is 2-8, followed by 2-2! Also, the STYLEREF fields in the header stopped working when there is a section break in the middle of the page - they just showed nothing. So I put in hard text in the header (since I had section breaks, I could have new text in each section), but when there is a continuous section break, the header seems governed by what is ABOVE the continuous section break, rather than what is BELOW it.
On the page where Chapter 2 starts, I would like the header to give the name/number of Chapter 2, and the footer to read 2-1.
Any ideas? Thanks!

Page Numbering Link to Next Page Numbering (.../2)

Posted: 17 Dec 2013 01:54 PM PST

Help!

 

Trying to number pages and sync the page numbering with the "next page" numbering.

 

First page numbering should start at -2-, first page should have the "next page" numbering as so: ".../2"

 

Last page should have a page number though the "next page" numbering should end at the second to last sheet.

 

Merci (hope this isn't too confusing lol)

 

.Doc Dork

MS Word 2007

Posted: 17 Dec 2013 01:02 PM PST

We are copying and pasting between MS Word 2007 documents and using track changes.

 

when we copy a table from one document to another document and then accept the change to the document - Word automatically changes the orientation of the target page from landscape to portrait.

 

why does it do this and how do we make it stop?

 

thank you for any help/ideas.

avoid gray background when printing comments

Posted: 17 Dec 2013 12:49 PM PST

I'm reviewing a document, that has various changes (using Track Changes) and a number of comments. When I print it out, there's a large section at the right of the page which has a gray background, where the comments go. 

But there are very few comments in this document, so this  this gray section is almost entirely wasted space. Also, the rest of the text is made smaller in order to fit the gray section, which makes it harder to read.

Is there any way to print the document without that gray background section? I'd prefer to have either:
(1) the background in that section would be white, or
(2) that gray section wouldn't appear at all, and the rest of the text would appear full size. (The comments would probably have to appear at the bottom of the page.)

Any suggestions?

Thanks.

VBA code to resize linked inlineshape objects

Posted: 17 Dec 2013 12:46 PM PST

I have over 100 linked pictures in a Word 2007 document (Windows 7). Most of the pictures are screen shots stored as bit maps. They are accessible in VBA as inlineshape objects.

 

Sometimes when I edit one of the linked bitmaps, Word resizes the image in the document. Its assigned height and width seem randomly chosen. In another question I asked if there were Word options to avoid this behavior. In case there aren't (but I still hope there are) such options, I looked for a way to store my preferred sizes for each picture. I considered several approaches:

 

  1. Find a settable property of an inlineshape object which I could set to the dimensions, and that Word would not overwrite. Alas, I couldn't find one.
  2. Define a document variable that I could relate to a unique, auto-generated identifier of an inlineshape and store the dimensions in the variable. Alas, there does not seem to be an ID for inlineshape objects.
  3. Add a comment to each inlineshape object that contains the dimensions. This is my current preferred choice. I can create a comment, but I can't find it later. The rest of my question deals with this code, but if there are better ways to maintain a set of preferred dimensions for each inlineshape object, I will scrap this code in a heartbeat!

 

The following subroutine expects that a paragraph containing one or more inlineshapes objects has been selected.

If the dimensions are stored as a comment, the code would verify/reset the dimensions to match those in the comment.

If the dimensions comment cannot be found and the width is not approximately 4.9 inches, the code would ask me if the dimensions are right and add a comment if they are. (I haven't decided exactly what I want to do if they are not right, so, for now, I just exit from the subroutine.)

 

The problem is, after adding a comment to the inlineshape, the program does not find it. I suspect that the "If s.Range.Comments.Count > 0" test is not testing the right property. The Count property has a value of 0, even though the document appears to be displaying a comment. Does anybody have any suggestions?

 

Thanks in advance,

Jim

 

Sub SetSize()
  Set para = Selection.Paragraphs(1).Range
  GraphicSizeFound = False
  For Each s In para.InlineShapes
    If s.Range.Comments.Count > 0 Then
      For Each c In s.Range.Comments
        If Left(c.Text, 12) = "graphic_size" Then
          GraphicSizeFound = True
'         verify the size of the graphic, and, if different
'           reset the graphic's size.
          Exit For
        End If
      Next c
    End If
    If Not GraphicSizeFound Then
      If (Abs(PointsToInches(s.Width) - 4.9) > 0.05) Then
        s.Select              ' highlight the graphic
        Result = MsgBox("height = " & PointsToInches(s.Height) & vbCr & _
                        "width  = " & PointsToInches(s.Width) & vbCr & _
                        vbCr & _
                        "Is this size right?", _
                        vbYesNo)
        If Result = vbYes Then
          Size = "graphic_size w=" & s.Width & " h=" & s.Height
          ActiveDocument.Comments.Add Range:=s.Range, Text:=Size
        Else
'         Figure out what to do in this case, but for now:
          Exit Sub
        End If
      End If ' Approximately 4.9"
    End If ' not GraphicSizeFound
  Next s
End Sub

 

Why can't I type across a complete line in my document?

Posted: 17 Dec 2013 12:10 PM PST

I have converted a pdf to Word 2010 document and am trying to make corrections. There are section titles, such as "Executive Director". In the pdf, the two words appear on the same line. In the Word document, they appear on two lines. When I try to retype them to the one line, the program will not allow it. It seems as if there is a margin at the end of "Executive". Looking at hidden markings, I see there is a paragraph marking after "Director" and wonder if this has anything to do with it. There are several titles lines within the document, so I need a solution to continue my project. Can anyone tell me what I need to do to type both words on the same line?

Page Positioning Behavior Word 2013

Posted: 17 Dec 2013 11:52 AM PST

I use Word documents to analyze stock market charts. The charts are pasted on separate pages, and in order to compare charts I have used a characteristic of Word to be able to align charts for comparison to one another. I have a macro that zooms a page out to 25% and then zooms back to 100%. In Word 2003 and earlier, this would result in the top of the page being aligned to the top of the pane always with the same relationship. Then the macro would scroll the page down a certain number of lines to have the chart exactly where I wanted it in the window.

I just switched to Office 2013, and I have found that zooming out and back in does not change the position of the top of the document page. The top is in the same vertical position it was in before I used the macro. Is there a way to get the previous behavior back?

Change the default settings of text inside a shape.

Posted: 17 Dec 2013 11:11 AM PST

I have changed the default settings for the shape, however, how do you change the default settings of the text inside the shape.  My text is white, center aligned and placed in the middle of the shape.  I want black text, left aligned and placed at the top of the shape.  I can change all these things, but NOT permanently.  I want these to be the default settings.  HELP!

Display only checked items in a Word document list, hide unchecked before printing

Posted: 17 Dec 2013 11:08 AM PST

I'm developing a Word document which is designed to allow the user to check work items in the contract template and leaved items unchecked if these work items are not included.

Once the user has gone through all sections and checked the scope of work items, I'm attempting to automate the print function to hide all of the unchecked items (by applying a style which has the hidden font attribute) and then proceed with printing.

I'm using the ActiveX style of checkboxes. I'm attempting to do a For Each looping statement to accomplish this task, but I'm not clear on how to structure it.

Any thoughts?

Thanks in advance
Joy

Word 2010 doc not generating an envelope

Posted: 17 Dec 2013 09:49 AM PST

A client sent me a document which appears to be the result of a mail merge for a letter to 48 recipients. She wants to select the first address (page 1) and click on the "Create Envelopes" button to get an envelope added. It will not work in the document. All that appears is the Envelopes Options dialog, but no options to add it to the document or anything else.  HOWEVER, when I copy and paste the same address as unformatted text into a blank document and repeat the steps, the dialog opens and the envelope generates as expected. Is this due to the main document being the result of a merge? It is a .DOCX, it appears to only be a year old (according to the properties it was generated in 12/2012)

Thank you in advance for any insight.

Check box content control button wizard!

Posted: 17 Dec 2013 09:27 AM PST

I used Developer to make a user form in Word 2010 and I want to add a Check Box Content Control Button/s that when clicked by the user, he'll be directed to the designated page or pages within the document, and print/save only those page or pages to a new file.  Here is what I want to happen:

Clicking the Check Box Control Button/s will:

  • Bring the user to the designated page/s or section/s and fill-in the form.
  • Save the filled-in page/s to a new filename and to a pre-specified file-sharing location.
  • Print only the first page and the filled-in page/s or section/s.

I am not a programmer and I do not know if this is possible!  Thank you so much for taking the challenge.

 

cropped picture in template --> "uncropped" on creating new document

Posted: 17 Dec 2013 07:56 AM PST

Hi all

I inserted a logo into a letter template and cropped it top/bottom. When I and most of my co-workers open up a new document based on this template, all seems well. For some users, though, the logo looks uncropped (not aligned any more with the text).

Is this a known bug/oddity? (I haven't found anything suggesting this ...)

Or is there some obscure compatibility or view option to force a picture to display everything?

The obvious workaround would be to crop the picture before inserting into Word, and I agree that this would be cleaner anyway, but still I'm curious if anybody has seen this behaviour as well ...

Greetinx from good old Europe
Robert

EXCEL icon - where is it?

Posted: 17 Dec 2013 07:40 AM PST

How do I find an EXCEL icon to insert into a WORD document?


I have hunted around and can't find any such icon but there must be one somewhere.


Thanks in advance for any replies.

MS Word 2003 - Lost pictures from template margin

Posted: 17 Dec 2013 07:05 AM PST

I have a standard template document in MS Word 2003 with text to the right of the page and a margin to the left of the page. I am setting pictures in the margin. However when pics are loading from our MS Access DB and there is a page break the pics that ought to "over run" onto the next page just lose themselves "under" the following page. Any response re a solution would be more than welcome. Thanks.

Font name and size box becoming blank for large footnotes in MS Word

Posted: 17 Dec 2013 06:20 AM PST

The font name and size box become blank when I select the entire footnote

having a large footnote, say about 400 word counts, in a document with total

1200 word count. Does it means that the font name and size are not consistent

in footnote? Anyone knows what's the issue here.

Insert para mark using Range.Find

Posted: 17 Dec 2013 05:55 AM PST

Suppose initially the entire text of a single paragraph is selected...

    Set rng = Selection.range
    rng.Find.text = "foobar"
    if rng.Find.Execute then
        ...
    end if

At this point (before "foobar") I want to simply insert a paragraph mark.  I know how to do this with regular Selection.Find, but it is not clear what is set by the Range.Find.Execute.

I am trying to understand and benefit from the wondrous wizardry of Ranges, but am having some difficulties, and would I appreciate any advice.

Font name and size becoming blank for large footnotes

Posted: 17 Dec 2013 05:12 AM PST

The font name and size box become blank when I select the entire footnote having a large footnote, say about 400 word counts, in a document with total 1200 word count. Does it means that the font name and size are not consistent in footnote?

Document no longer showing correct number of pages

Posted: 17 Dec 2013 03:58 AM PST

I have a document that is around 15 pages long however the Page Count at the bottom right only shows there being 6 pages.  When in print layout mode I can see up to page 6 however if I try to scroll further down there is a suttering/repeating pattern of the top of a blank page.  If I use select all I can copy and paste the text into a new doument.  If I switch to Web Layout I can continue to scroll down and see the rest of my document.

 

When attempting to print only 6 pages are listed.

Office file icons on desktop have changed...

Posted: 17 Dec 2013 01:38 AM PST

I have an almost identical issue to this post -


- with one difference, it is the file icons on my desktop that are not displaying the correct image, Word, Excel, etc. (Office 2007 on Windows 7 laptop). What's more, it is not every file but seems to be random including files saved as templates.

MS office 365 Microsft Word and Excel open but after creating new template stopped working

Posted: 16 Dec 2013 11:33 PM PST

On Window 7 I installed the MS Office 365 monthly subscription and I have scanner and printer. Every time I open Microsoft Word it load the program and on first click on new documents and it will crash and says Microsoft Word has stopped working. Same thing with excel also. I follow the advice and open in safe mode by typing excel /safe(type excel and space then / then safe). After that options and remove AABBYY add ins. Its help until I install Brother Printer software.


I don't know what should I do to fix this problem.

How to Create the document that contains the table of contents with x field ???

Posted: 16 Dec 2013 10:26 PM PST

Hi ..
I am trying to create the word documents that contents the table of contents having 'x' field flag ????

How edit text from .tif file?

Posted: 16 Dec 2013 10:14 PM PST

I have a file having extension .tif. i want to convert it to word file and edit its content. is this possible ??

How do I remove/change the Miriam Webster's dictionary that I poorly choose, to the Encarta or a better dictionary,

Posted: 16 Dec 2013 10:01 PM PST

I'm a new Windows 8/now 8.1 User. I'm also of course, new to the brand new Office program. Much to my surprise while working on a WORD document, I went to use the dictionary, and there wasn't one like there used to be.  I found out that I had to download one along with doing a lot of things in a short span of time that I'm not really sure what I did to get the Miriam Webster's Dictionary in word. Fast Forward...the online Miriam Webster's dictionary is lacking in my need. 

Does ANYONE know how to remove the current dictionary from word and replace it with Encarta?

Template Page

Posted: 16 Dec 2013 07:57 PM PST

How do I bypass the template page on Microsoft Word? It gets annoying having to choose a blank template every single time I open Word.

TOC levels -- 3rd & 4th level in Word 2007

Posted: 16 Dec 2013 07:46 PM PST

I am editing an APA document where level 3 and level 4 headers are in-line with the paragraph text.  How do I set the field codes for these levels so they do not include the entire paragraph text?  There used to be a style separator in 200, but I cannot find this in 2007.   Thank you.

Read-only Compatibility mode

Posted: 16 Dec 2013 05:50 PM PST

I bumped into my computer a few minutes ago, and now my Word 2013 files all come up with Read-only compatibility Mode.  This does not affect the editing of the files.

How can I get rid of this?

Equation Editor

Posted: 16 Dec 2013 05:25 PM PST

Hi, looking for a little help. In equation editor I'm trying to find the right command sequence to get an integral with bounds of integration without using the drop-down menu. When I type \int_(-\infty) I get the integral from negative infinity with no upper limit of integration. I want to add an upper limit of integration but all subsequent commands entered apply themselves to the integrand rather than to the integral operator. 

Microsoft Office Word 2007 not minimizing documents or saving documents

Posted: 16 Dec 2013 04:43 PM PST

I use Microsoft Office Work 2007 for work. I am using Vista. Sometimes when I create a document on Word 2007 and save it, it will minimize it for a time then disappear when I go back to something else on the computer. Sometimes it will disappear after I save it and then bring it up as either the original or autosaved. How can I prevent the documents from disappearing from my system tray at the bottom even after I save them?

Can't download service packs & can't open some docs Microsoft Office for Mac

Can't download service packs & can't open some docs Microsoft Office for Mac

Can't download service packs & can't open some docs

Posted: 02 Aug 2009 11:32 AM PDT

On 8/2/09 5:55 PM, in article caR9absDaxw,
"com" <com> wrote:
 

If you have a backup copy of the Office for Mac folder in Applications you
can simply drag it back and replace 12.2.0.

If you do not have a backup then you will need to re-install Office then
update to SP1 then to 12.1.9. You will need to manually download the 12.1.9
updater since the MAU will only find the combo 12.2.0.

Steps to re-install Office

<http://www.entourage.mvps.org/install/reinstall_steps.html>

12.1.9 updater

<http://tinyurl.com/lt7767>

I would expect a fix for this should be forthcoming, but this is only my
speculation.

--
Diane

What fonts do i need to keep?

Posted: 02 Aug 2009 07:57 AM PDT

The complete list of what's supplied with Office 2008 is located here:

http://www.microsoft.com/typography/fonts/product.aspx?PID=147

Those supplied with OS X 10.4 (Panther) are listed here:

http://support.apple.com/kb/HT1538

However, even though you don't actually use some of them I'd suggest that
you leave them installed - Office as well as OS X - although the OS X
essential fonts can't be disabled.

HTH |:>)
Bob Jones
[MVP] Office:Mac



On 8/2/09 10:57 AM, in article caR9absDaxw,
"com" <com> wrote:
 

Change icon in Office 2008

Posted: 01 Aug 2009 04:34 PM PDT

On 8/2/09 6:08 AM, in article caR9absDaxw,
"com" <com> wrote:
 

They are washed out in comparison. I hope the next go round gives us better
icons. The pukey purple has not been a huge hit. :-)

--
Diane

I need to make a back up copy of Office 2008 programs

Posted: 01 Aug 2009 07:32 AM PDT

Depends fully on the functions provided by the web site *you* are using
to be the "front end" of this newsgroup. Unique to that web site.

--rms




com wrote: 

12.2.0 update

Posted: 31 Jul 2009 11:53 PM PDT

In article <caR9absDaxw>,
<com> wrote:
 

I'll arrange a full refund. Sorry we couldn't be of more assistance.

Request for updaters for Office 98 - any mirrors or copies?

Posted: 31 Jul 2009 03:12 PM PDT

On 7/31/09 3:12 PM, in article caR9absDaxw,
"com" <com> wrote:
 

Found one...

Office 98 SSL Security Updater for Macintosh
<http://tinyurl.com/nr7jub>

I found links, but often they eventually end up with the newest download
page. Sorry.

Combined Updater for Office 98

<http://support.microsoft.com/kb/214785>

Search results for Microsoft downloads: lots of templates

<http://tinyurl.com/lm4gca>

Scroll down to Office 98 on this page: Note most default to the new Mactopia
downloads, but at least you have a list of what you need.

<http://www.hpcfactor.com/support/patching/office/>

Microsoft Office 98 SSL Security Updater
PowerPoint/Excel 98 Macro Vulnerability Update
Microsoft Word 98 for Mac Security Update: Macro Vulnerability
FrontPage Patch 1.0 for Mac OS 9 *
Combined Updater for Office 98
Microsoft Word 98/PowerPoint 98 Updater
Microsoft Office 98/Mac OS 9/Excel Y2K Updater
Word, Excel and PowerPoint 98 Updated Metafile Filter
Powerpoint 4-8 Translator Update Version 8.01

--
Diane

Trying to display Chinese SimSun font in Word X

Posted: 31 Jul 2009 01:27 PM PDT

Based on the info you provided we were able to open the document in TextEdit
and this will work well enough for this project.

Thanks again


"CyberTaz" <cast.net> wrote in message
news:C698E4EB.50B9D%cast.net... 

Has anyone noticed that their computer runshot while running Microsoft Office Products?

Posted: 30 Jul 2009 09:06 PM PDT

You might check the Apple Downloads site to see if there any firmware
updates for your flavor of Mac. Revving fans have been a recurring issue for
several models over the last few years. There may also be some conversation
in the Apple Discussions forum. Links to both:

http://www.apple.com/support/downloads/

http://discussions.apple.com/index.jspa

HTH |:>)
Bob Jones
[MVP] Office:Mac


On 7/31/09 12:06 AM, in article caR9absDaxw,
"com" <com> wrote:
 

Mac Office Home Use Program - Media not recognized

Posted: 30 Jul 2009 09:08 AM PDT

On 7/30/09 9:08 AM, in article
googlegroups.com,
"bsakelly" <com> wrote:
 

Check the DVD Player setting-- re-set it to the max speed. This has worked
for some users.

You could try making a disk image on another computer and use the image
instead. That would be quicker than getting Microsoft to replace the disk.

You could also use the CD from another employee to install. As long as you
have a legitimate key that would be OK.

--
Diane

Downloads and upgrades

Posted: 29 Jul 2009 11:30 AM PDT

If you don't need Exchange you can get Office 2008 very reasonably. $97.49

<http://tinyurl.com/4ydu2u>

Do not remove Entourage X before you export your data. Upgrading an
Entourage X Identity can be troublesome for both Entourage 2004 and
especially for Entourage 2008. Once you are satisfied with the upgrade, you
can use "Remove Office" to remove the old application and manually delete
the Office X Identities folder in the Microsoft User Data folder.

How to manually move your data. (when import fails and/or you need to move
to a new Identity same version or revert to an older version)

<http://www.entourage.mvps.org/install/manual_install.html>

--
Diane


On 7/29/09 11:42 AM, in article C69664A1.11DA6%org,
"Michel Bintener" <org> wrote:
 

Buggy Office 2008 SP2

Posted: 28 Jul 2009 11:19 AM PDT

I found this page on the Help and How-To section:

I can't open an Office document after I install Office 2008 SP2 Update

<http://www.microsoft.com/mac/help.mspx?MODE=pv&CTT=PageView&clr=99-0-0&target=abce2ca1-4efe-4bb0-bd21-34ad9242779d1033>

This states this is a known issue with SP2. Here are workarounds:

1. Save your document to .doc, .xls, or .ppt format by using Office 2008 for Mac 12.1.9 Update or an earlier version.

2. Save your document to .doc, .xls, or .ppt format by using Office 2004 for Mac with Open XML Converter.

3. Convert your document to .doc, .xls, or .ppt, by using Open XML Converter.

4. Save your Word or Excel documents by using 2007 Microsoft Office Suite Service Pack 2 (SP2) for Windows.

5. Save your document to .doc, .xls, or .ppt format by using Microsoft Office 2003 or an earlier version with Microsoft Office Compatibility Pack.

6. Use the Apple Time Machine to roll back to Office 2008 for Mac 12.1.9 Update or an earlier version.

7. Remove Office manually, reinstall Microsoft Office 2008 for Mac from the original installation media, and then upgrade to Office 2008 for Mac 12.1.9 Update. Do not upgrade to Microsoft Office 2008 for Mac Service Pack 2 (12.2.0) from Microsoft AutoUpdate.

I chose to do Option 6. I am back at pre-SP2, and I can open my documents again.

This buggy service pack should be pulled from Microsoft immediately until these issues can be addressed.

Microsoft CRM - Why can't I make changes to the activity schema?

Microsoft CRM - Why can't I make changes to the activity schema?

Why can't I make changes to the activity schema?

Posted: 21 Aug 2004 10:17 PM PDT

Hi,

I have tried this, and as usual it is not supported by
MS. Hack away in the metadatabase....
 
it though. The way 
te forms are actually 
uses XML & XSLT to 
for the activity object. 

Field validation and formatting

Posted: 21 Aug 2004 04:49 PM PDT

Paul,

There are some unsupported ways of adding events to other fields. it involves
exporting the customizations, then editing the resulting XML. You need to find
an example of how the OnChange is tied to a picklist and then replicate these
nodes on the field in question.

A few warnings though:

- Make sure to keep a backup of the original customization file. This way you
can always put it back the way it was.

- Make sure you are careful with the node names, etc.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Sun, 22 Aug 2004 10:04:51 -0500, "Paul McBride" <net> wrote:

Thanks for the reply.

But, really? They didn't expose an onBlur event for the standard text boxes?

I would love to hear, from someone at MS, if possible, exactly what the
rationale behind that decision was. I mean, this IS web programming 101.

Very frustrating...
"Benjamin Zachary" <com.spam> wrote in message
news:46.248.16... 

CRM 1.2 Data migration

Posted: 21 Aug 2004 12:50 PM PDT

its a bit late here so if I am missing the point please ignore me :-)

Right now you are using SBS 2003 and moving to 2003 enterprise? Will this be
in a new domain or are you upgrading the SBS box to the new domain? Either
way check out these tools which help

http://www.microsoft.com/downloads/details.aspx?FamilyID=bfced393-61db-49af-9a50-4a90b311fa7d&DisplayLang=en#filelist



--
John O'Donnell
Microsoft CRM MVP
http://www.microsoft.com/BusinessSolutions/Community/CRMFaqLanding.aspx


"Steven B" <microsoft.com> wrote in message
news:aa4701c487b8$153762a0$gbl... 

CRM for a tech support company

Posted: 20 Aug 2004 02:41 PM PDT

We have looked at it for our time billing and there is a nice section
there for service contracts, and then you apply work performed to service
contract and it breaks it down. It keeps a nice history under the Account
/ Contracts area with a breakdown of all the work but it does not tie
into anything for billing. It works well for in house support and things
of that nature but probably isnt going to work for field service since
the Service piece doesnt have a Synch option (SFO = SALES for Outlook not
Service! heh).

"Mike Coleman" <net> wrote in
news:O292$phx.gbl:
 

Microsoft.CRM.Proxy.BizUser or Microsft.Crm.Platform.Proxy.BizUser

Posted: 20 Aug 2004 01:42 PM PDT

t

"Jake Horn" wrote:
 

MSCRM SFO client won't synchronize

Posted: 20 Aug 2004 09:46 AM PDT

I just had this one. I briefly saw an error about SSPI so I tried running
this at a command prompt:

osql -E -Scrmservername

And I got back

Cannot generate SSPI context

I ran windows\system32\cliconfg.exe and set up the alias to the SQL server
as Named Pipes instead of TCP/IP. Now the OSQL command works and logs in
(-E tells it to use Windows authentication). Went into Outlook - go
offline, works away (a bit slower though).

What's the cause - my DNS is not working correctly. Probably because I am
running against a virtual server. Anyway, check your DNS - might be the
problem.


Stephen



"Steds" <logicale.co.uk> wrote in message
news:talkaboutsoftware.com... 

Add Lead Source

Posted: 20 Aug 2004 08:13 AM PDT

You need to publish from Deployment manager on the CRM Server and then issue an
IISRESET.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 20 Aug 2004 13:11:25 -0700, "Paul Hieb" <com> wrote:

So what's the procedure to "publish the changes"

I've made several modifications to various forms, and none
of them have done anything to the actual forms. I assume
that is because I haven't done this step.

Thanks!
 

Deletion of Fields - MS reps out there?

Posted: 20 Aug 2004 08:02 AM PDT

PS: I forgot my std qualifier: MAKE SURE YOU HAVE BACKUPS. :-)

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 20 Aug 2004 10:02:21 -0500, "Kristina Ledford" <com>
wrote:

Haven't seen this asked in a while... any chance of field deletion in the
future? We have about 20 extra fields we do not use/need.

Kristina

ps
We have a test environment, I would be happy to give things a try if anyone
has done this already...

405: Method Not Allowed

Posted: 20 Aug 2004 06:21 AM PDT

Check that the URL for the .srf files is correct in your application.

I get this error on Outlook clients because there is no valid http path to
..srf files.


Stephen

"tashtan" <net> wrote in message
news:phx.gbl... 

ERROR: user already exisits !

Posted: 20 Aug 2004 04:00 AM PDT

yup ! that was it. i removed the users from the members list and it worked.
Thanks Matt.
Ashfaq

"Matt Parks" <com> wrote in message
news:com... 
indicating 
wrote: 
few 
to 
the 

GP 8.0 and MS CRM

Posted: 19 Aug 2004 11:09 PM PDT

It all depends. What are you trying to accomplish? If you truly need CRM and
you need it to integrate with GP, then you either need to wait until MS supports
this (which last I heard won't be until CRM 2005) or you need to pursue another
integration solution like George mentioned.

Aside from that, as for whether to update GP is purely a business decision on
your end. The UI improvements are great and it seems fairly stable.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 20 Aug 2004 10:15:14 -0700, <microsoft.com> wrote:

Thanks for the reply... Would you know then if it's ok to
go ahead and upgrade from 7.5 to 8.0 and just implement MS
CRM when it's ready to integrate to 8.0? Thanks 
Great Plain 8.0. 
wrote in message 
8.0 

Problem after Win XP SP2

Posted: 19 Aug 2004 09:02 PM PDT

"=?Utf-8?B?QXBwYSBEZXY=?=" <microsoft.com> wrote in
news:com:
 

You also need to turn off the pop up blocker built into SP2 thats your
first problem. Instead of applying all the patches you can get by for
awhile by adding the crm server into the trusted sites, but I believe
theres still an issue with running Crystal Reports Im going to verify on
Monday.

Help!!! Unbelievable!!! Cannot Add Account...

Posted: 19 Aug 2004 04:33 PM PDT

Try using fewer exclamation marks

"Hank" <microsoft.com> wrote in message
news:9dad01c486da$0fcad4c0$gbl...
Can anyone recommend a newsgroup that people reply to?
Does Microsoft monitor this newsgroup?
Is it just me or does everyone feel like a beta-tester for
CRM?
 
getting 
any 
= 
- 
i 
t 
- 
3 
t 

Custom fields showing as Number type in Crystal but Picklist in CRM

Posted: 19 Aug 2004 12:03 PM PDT

one of the gotchas of crystal!

lets say you have a field called CFPjohnsfield. This value is a picklist.
When you click insert field you will see this field listed but you will also
see a field with the same name except it will also have the word name added
to the end like this CFPjohnsfieldname. This of course will contain the
actual string rather than just a number

--
John O'Donnell
Microsoft CRM MVP
http://www.microsoft.com/BusinessSolutions/Community/CRMFaqLanding.aspx


"Roger Strain" <co.za> wrote in message
news:google.com... 

Contact activity history

Posted: 19 Aug 2004 12:03 PM PDT

buy the c360 software plugins is the quickest way.

"kat" wrote:
 

Duplicate records in CRM

Posted: 19 Aug 2004 07:52 AM PDT

Check the MS CRM 1.0 MSDN there is a useful code there for duplicate records
if you know programming.
"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 
bring 

CRM Deployment Manager error

Posted: 19 Aug 2004 07:11 AM PDT

The CRM HOmepage won't ask for a login as it uses integrated security. So it
should inherit the current domain login of the user.

Typically, the anonymous login problem is related to the security of the
services that CRM & SQL are running under. What are those services configured
to use? (ie. Local System vs domain account).

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 20 Aug 2004 13:14:58 -0700, <microsoft.com> wrote:

I tried adding 'NT AUTHORITY\ANONYMOUS LOGON' user on the
databases on sql server, and the error has disappeared.

But my concern is that now, crm homepage dosent ask for
login info.

Has anyone read in instalation procedures, to create an
account in sql server for crm to login as a anonymouse
intially ?

Or its supposed to be done by the installation ?

PostURL

Posted: 19 Aug 2004 04:55 AM PDT

No, the PostUrl does just that, it Posts the data in the form object.

How are that values being "displayed"? Since the page is invoked from the
workflow engine, you need to send "messages" to a file (or other log) as typical
form display won't work.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 19 Aug 2004 16:38:35 +0100, "Stephen Redmond" <ie>
wrote:

I might be wrong here but does this not come through the QueryString object
instead of the Form object?


Stephen

"Guru" <microsoft.com> wrote in message
news:com... 

Microsoft Word - unable to print from Word.

Microsoft Word - unable to print from Word.

unable to print from Word.

Posted: 16 Dec 2013 03:24 PM PST

I can no longer print from Word. I can print with copy and paste or e-mails. When I print a label or in Word it shows up and the printer does it's thing and you think it is working but nothing shows on the paper. Yes I have ink. Thank you

Mail Merge from Word 2010- Outlook 2010

Posted: 16 Dec 2013 03:21 PM PST


I am doing a mail merge from Excel to Outlook.


The merge is working fine and transferring to outlook - however the address is showing quote marks when it transfers across


i.e


'name@****'


As there are quote marks it is not recognising it as a valid address. Wondering what could be causing this.


Thanks :-)

How can I insert a contact's address in an envelope?

Posted: 16 Dec 2013 12:30 PM PST

I have--with help here--figured out how to insert a contact's name and address into a typical Word document using AddressLayout/Quick Parts.  It seems to work fine whenever I click on the Insert Address button, inserting the contact's name, company and address, in, say, a letter.  And if I click on Mailing, Envelopes the same information pops up in the window for addressing the envelope.  However, if I am not creating a letter in Word but simply creating an envelope using Mailings, Envelopes the Insert Address button pulls up a simplified version of what I have set up in AddressLayout--the person's name and address only.  Is there a way to get the same information as I have set up in the AddressLayout Quick Part?

microsoft office starter 2010

Posted: 16 Dec 2013 12:17 PM PST

I am operating with windows 8 and 2 days ago Microsoft word and excel starter 2010 edition have stopped working. I get a dialog box titled Click to run applications manager with dialog of Microsoft word starter 2010 cannot be opened. Try again or repair the program in control panel.

I have repaired Microsoft office starter edition 2010 through the control panel and the repair says it has been completed. However word or excel will not open  and I just get the above dialog box.

The computer came with windows 8 and the pre installed edition of Microsoft starter 2010.

Word Converting by Self

Posted: 16 Dec 2013 12:14 PM PST

We have Office 2013 on Windows 7.  With no rhyme or reason, my documents that I have created and saved in (for example) Word 2013 will change to Word 2007 document.  When I try to open the file, it will open in a jiberous title eg. "WD000013 [Read Only] [Compatibility Mode]".  I found a fix for this once and thought it was rectified, but it's doing it again now and of course I can't find the fix again.  Yes, in save options, I have it set to save in .docx format.  So that is not the fix.  When I check the properties of the file that was originally saved as Word 2013, it has changed itself to say Opens With: Microsoft Open XML Converter.  When I go to change, it recommends "Microsoft Office 2013 Component", "Word (Desktop)", "WordPad" or "Microsoft Works Word Processor".  Any suggestions?

Unable to print Word document including comments in bubbles at side. Suggestions?

Posted: 16 Dec 2013 11:59 AM PST

Unable to print Word document including comments in bubbles at side. 


-  I've selected Show Markup in the Tracking group

-  This step puts a check beside 'Print Markup" within Print > Settings > Print All Pages

-  It prints the main document (without bubble comments) smaller on the page, and leaving room for the bubble/comments, but they don't print.


Any suggestions?   Thanks.

Simple Word problem

Posted: 16 Dec 2013 10:26 AM PST

I cant move the word "reporting" under the word "As".  tab takes it too far over and when I delete the spaces it come back under the "3". What setting I have to change in word so when I use the "space bar" the line moves and wrap to the the next line if need be ?


Thanks

Skybox4477


3: As a HRIS Professional I have re-engineered marginally performing systems into major applications that enhanced the department's process and     reporting requirements.This was done by putting the application on line which reduced the processing time from weeks to days.

Word resizes a linked inlineshape when the link is edited

Posted: 16 Dec 2013 10:24 AM PST

I have over 100 linked pictures in a Word 2007 document (Windows 7). Most of the pictures are screen shots stored as bit maps. They are accessible in VBA as inlineshape objects.

 

Sometimes when I edit one of the linked bitmaps, Word resizes the image in the document. Its assigned height and width seem randomly chosen. So I have some questions:

 

1. It this a known problem (feature) in Word?

2. Are there specific instances when this happens? If so, maybe I can modify the document to avoid those cases.

3. Is there some way to force Word to use the per cent height and width or the specific height and width of the shape that I chose for the picture?

4. Are there some "best practices" for capturing screen images and including them in Word documents?

 

Thanks in advance,

Jim

Can I unpack MS Word footnotes into my body text?

Posted: 16 Dec 2013 08:55 AM PST

I have a word document with several hundred footnotes that I want to post online. In order format it for online viewing, I need to have all the footnotes in the body of my text wrapped with tags (i.e. John Doe said, "This example is fine."<ref>footnote text</ref> Next sentence starts here). 

Is there a way to move all the footnote text to their numeric anchors? Can I automatically add a <ref> to the start and </ref> to the end?

autocorrect

Posted: 16 Dec 2013 08:33 AM PST

I am trying to import ms word autocorrect from win7 to win8. i have already tried pasting it on what i think is the folder for autocorrect entries in windows8. trying if it is effective, i have keyed in shortcut keys which i almost always use on my pc running on win7 but it was not effective. can you please help me? 

is this the folder where i should paste the autocorrect files from my win7 desktop?
C:\program files(86x)\microsoft office\office14?

thanks! i really need this autocorrect files badly as these makes my job a lot whole easier..

Blocked from old Hotmail account.

Posted: 16 Dec 2013 08:06 AM PST

Forgot my password, was told to set up new live account ,then  filled in form to recover old account, this was verified by email to new account. Then I was told to set new password which I did. Then told to set up security which was sent by text. They were not recognised but finally one was. BUT still can't get into my old hotmail account. Every time I try only my new outlook account comes up. As my old account was verified why can't I access it?  Please help I have lost all my email addresses etc.

Headers on Labels

Posted: 16 Dec 2013 07:58 AM PST

Hi

Im trying to add headers to individual labels in word 2007.

Is there a way to do this?

Custom Properties, TOC, Figure Number, Cross Reference, Table Number Issues in Word 2007

Posted: 16 Dec 2013 07:47 AM PST

I am using Word 2007.  I have a number of custom properties defined for my document, an automatically generated TOC, many numbered figures and tables.  I have to individually toggle the property codes to get the values to appear.  Once I have all the appropriate property values displayed, I save and close the document.  Upon reopening the document I once again have the property codes e.g. {TOC\o "1-3" \h \z \u}.   I have spent hours tinkering with custom properties and trying to find a solution.  Can someone help me solve this issue?  Thanks.. 28

Formatting Caption Labels Separately.

Posted: 16 Dec 2013 07:39 AM PST

I would like to create a style that allows me to add a caption and not have to format the label manually.

 

I have a style right now called Figure Caption. When I add a new caption, I get this:

 

Figure 1-1: Example Text

 

Now I have to go back and manually change the "Figure 1-1:" to bold.

 

I want to make a style that automatically makes the caption:

 

Figure 1-1: Example Text

 

Is there any way to do this?

Word will not open

Posted: 16 Dec 2013 07:34 AM PST

I have MS Office 2000 Professional installed on my XP system computer and have been using it for years.  Recently, when I attempt to open Word, I get the sign-on screen and it will not open further.  Excel and PowerPoint work fine.

 

I have uninstalled and re-installed Office 2000 several times from the original CD with no change.  I have also run Detect and Repair from Excell with the shortcut change also and that does not work any better.  I have also tried other suggestions found on this site.

 

I know Office 2000 is old but it served me well and I am reluctant to purchase a new version.

 

Any ideas?

 

Thanks, Sprinrr

 

 

 

Unable to open Microsoft Office documents attached to email, on flashdrive.

Posted: 16 Dec 2013 06:59 AM PST

I purchased a laptop computer with Windows 8 installed on it. I also purchased Microsoft Office Home/Student 2013 edition. I am unable to open email attachments, documents on a flash drive etc. I don't know where to go to fix this.  When I attempt to open a document, it tells me to go and purchase a Microsoft Office product that is compatible with the document.  Please help.

flatten shapes in word

Posted: 16 Dec 2013 06:48 AM PST

If I draw more shapes in MS Word and want to move shapes I have to select all the shapes and then move them. Please tell any other short method to select all shapes on a page at the same time and keep them selected forever. I.e when I want to edit text of the page shapes become odd.

Hyperlink address with "#" in it fails now.

Posted: 16 Dec 2013 06:29 AM PST

Hi, I'm working on a Word document (Word 2010, Windows 7) at work, a large reference manual with many links going to various websites. In earlier versions, I could link to specific parts of a webpage with an address with "#" in it. For some reason now, it come up with an error message if the link is in any Word document.

 

For example, if I create a link to:

 

http://en.wikipedia.org/wiki/Cat

 

It takes me to the top of the Wikipedia article on cats, no problem. But if I add a link directly to the part of the article on cat behavior and use this link:

 

http://en.wikipedia.org/wiki/Cat#Behavior

 

It should go directly to the "Behavior" heading in the body of the article. Instead I get an error message from Wikipedia..."Wikipedia does not have an article with this exact name." It's not a problem with Wikipedia, it's the same with other websites. BTW if you cut and paste the link into the address area of Internet Explorer, the link works. It's only when linking from a Word (or Excel) doc that it fails.

 

One of our tech people noted that it appears Word is changing "#" to "-", so in the error message above, it shows the address as:

 

http://en.wikipedia.org/wiki/Cat_-_Behavior

 

So it may be that Word isn't recognizing "#" for some reason, and is changing it to "-" for some reason(??)

 

 

 

 

Word will not let me edit or close

Posted: 16 Dec 2013 06:00 AM PST

I have a word document and I tried doing the right-click>Convert to Adobe PDF, and it had me save the PDF file in a folder, and then it had me save the file again. (which I thought was a little weird) After that it gave me an error in Notepad saying:   %%[ ProductName: Distiller ]%% Cambria not found, using Courier. %%[ Error: invalidfont; OffendingCommand: xshow ]%% Stack: [338 373 332 0] () %%[ Flushing: rest of job (to end-of-file) will be ignored ]%% %%[ Warning: PostScript error. No PDF file produced. ] %% So I close the Notepad error and now I can't click inside of any of my open Word documents. It just 'dings' each time I click. I think there's an open dialogue box or something but I can't SEE any. And I'm not sure when I saved my word documents, so I'm trying to fix this without shutting down or 'End Task'ing Microsoft Word.   Please help.   DDouget

Drag and Drop in Word (W7) does not work

Posted: 16 Dec 2013 05:38 AM PST

Drag and Drop in Word (W7) does not work if the Find/Replace dialoge box is open. Has this been fixed? I I have asked before, no reply.

Display of Hebrew Vowels in MS Word 2007 in Windows 8.1

Posted: 16 Dec 2013 04:20 AM PST

Hi,

I'm using WORD 2007 in Windows 8.1. After resolving the issue of writing hebrew vowels (Nikud) by changing the keyboard layout, I started adding vowels. 
However, the display of HOLAM HASER (חולם חסר) is messed up. Instead of appearing above the letter it appears besides it. 
The same document, when opened on another computer, is displayed correctly. 


Here's an example, where you can see the HOLAM HASAR appearing three times beside the letter ו instead of above it.
 

Please help.

Is it possible to create/customize a toolbar in Word 2010, like in previous versions of Word

Posted: 16 Dec 2013 03:51 AM PST

Hi, to expand on the question title:

 

In previous versions of word, you clicked on View > Toolbars > Customize > New... and you would have a floating toolbar. I used this as part of my job and added lots of individual autotext snippets and had these grouped in categories for easy access.

 

Now, with Word 2010, I am struggling to replicate this. I understand the ribbon and the QAT and I have the autotext option within both of these. In the QAT clicking autotext shows a long list of autotext snippets but this means scrolling through them to find the correct one, with seemingly no way to group or sort these.

 

What I want to do is have a similar toolbar or a way to create a new tab on the ribbon with the ability to drop individual snippets of autotext into their for ease of access.

 

I hope someone can help and i appreciate any help you can give.

 

Thanks, Josh.

https issues in Word 2010

Posted: 16 Dec 2013 12:13 AM PST

Hi,

I have problems opening a file via Active X control and https and need some ideas how to proceed with the analysis.
The server is a custom WebDAV implementation on a SAP Netweaver 7.40 system.
The following behaviour:
http works without problems
https is OK if I copy and paste into an IE window or file open dialogue, but I do get several client certficate popups. It does not matter whether I choose the correct certificate or cancel the popup
https via documents.open of the word application causes an error
https over ActivceX works fine when I try to log the communication with Fiddler

Regards
 Andre

Customize Keyboard, assigning a shortcut key

Posted: 15 Dec 2013 10:43 PM PST

Apologies in advance for a long story.

 

I've created a macro that I want to assign to a particular key combination. I've done this literally thousands of times over the last 15 years, but i've never come across anything like the problem I've having here.

 

I have assigned the macro to a key combination: Ctrl+Alt+M.

 

As expected I am able to use that key combination to run the macro -- and then for no apparent reason it suddenly stops working.

 

The macro is still there, and can be run directly. And when I go into the Customize Keyboard dialog, I can see that Ctrl+Alt+M it is still assigned to the macro. But it doesn't run.

 

The first few times this has happened, I've Removed the assignment, then reassigned it. And I have somehow been able to get it to work for a time -- until it mysteriously stops again. Within the same Word session, it will work, and then stop.

 

This last time, as has happened before, when I went to do the usual Remove and re-Assign, I found that the box where I enter the key combo, is rejecting Ctrl+Alt+M. I type it, but it doesn't appear in the box. Nothing at all happens, it's as though I am not pressing any keys at all. I do not get an indication that it is already assigned -- but I can see that it IS already assigned. If I remove the assignment, then (as in the past) I may get lucky and find myself able to reassign it after opening and closing Word a few times, but it's very inconsistent.

 

On a hunch, I went to the desktop and tried to assign Ctrl+Alt+M to an application shortcut, through the shortcut's Properties dialog. When I type that key combo, the box automatically clears, indicating that it is already assigned. Yet I haven't assigned it to anything -- certainly not since I started being intermittently able to assign it to a Word macro.  (I am aware that desktop Shortcut shortcut keys take precedence over Word key combo assignments.) Yet when I type Ctrl+Alt+M outside of Word, even when directly on the desktop, nothing at all happens, i.e., it really doesn't seem to be assigned to anything.

 

Thinking it might be something wrong with my Normal.dotm template, I renamed and hid it form Word, forcing the creation of a new one. I then recorded a macro, but when I tried to assign it to Ctrl+Alt+M, the same thing happened.

 

I found a utility that will display all shortcut keys that are currently assigned to desktop shortcuts. When I run this, it correctly shows all of my shortcuts, and as expected, Ctrl+Alt+M is not one of them.

 

SOMETHING is intermittently inhibiting this one particular key combo from being assigned to either a Word command/macro or to desktop shortcuts, and when I am able to make an assignment, it eventually stops working.

 

I'm hoping that someone might detect a clue in this tale of woe as to what it might be.

 

Thank you. 

 

 

I cannot open any downloads with Microsoft Home and Student 2010, lots of different error messages

Posted: 15 Dec 2013 09:33 PM PST

I am getting messages like this when I try to open a document send to me:

C:\Users\Gwynn\AppData\Local\Microsoft|Windows\Temporary Internet Files\Content IES\WZ4X02PQ\docs to sign pdf is not a valid Win32Applcation


And if I am downloading a word document replace the pdf with that. My pdf is not working either.


Another error message is "Not a valid Win32 Application"


I looked and tried some of the other remedies on this site none worked??


I also can write and save documents in word or excel....but then when I go to open them my computer will not open then even though I saved it as a word document???


HELP this is driving me crazy!!

Gwynn

Remove Header Sections

Posted: 15 Dec 2013 07:13 PM PST

I am working in a 93 page document, that I need to reformat and insert new information. Unfortunately in this 93 page document, it has about 50 different Header sections. I've gone through and deleted all of the headers since they will change as I make changes to the document, but all of the sections remain. How can I delete the sections? This applies to the footer as well. There are obviously just as many footer sections. Is there a way to do it all at one time?

What's happening is that I will want the same header on each page, but I have to at this point, go to each section and type it. What happens if my company wants a change made, I will have to do it 50 times. And then deal with the footers. :(

Please help.

 

Help with finding superscript numbers and replacing with footnotes

Posted: 15 Dec 2013 06:25 PM PST

Hello all,

I have some documents where the footnotes are just superscript numbers. I want to search for those superscript numbers and replace them with a real footnote. Using the macro recorder and some wildcards, I can find the superscript numbers, but I need to do something else to actually insert a footnote. Getting those bits of macro to play together, though, has been eluding me.

Currently I'm just having Word highlight the superscript numbers so I can visually see where I need to insert footnotes. Once I have real footnotes inserted, I run a find/replace to delete highlighted text. It's working okay, but I'd like something a bit less kluged/more idiot proof.

Any help would be appreciated.
Thanks,
-W.

Paste a sparkline into Word

Posted: 15 Dec 2013 05:03 PM PST

I'm trying to add some sparklines from Excel into a table in Word, but I can't work out the best way to paste them in.

If I do a straight copy and paste, they come up as blank. If I copy and paste each as a picture, they work but leave a grey border around the sparkline even though my Excel cells have no borders.

What's the best way to paste sparklines into word so that they don't have any grey borders?

Josh

Help verifying Word 2010 / getting programs to recognise internet connection!!!

Posted: 15 Dec 2013 03:23 PM PST

Hi,

I recently rebooted my computer to restore it to factory settings. Following this I re-downloaded Microsoft Word 2010, using the product key from when I originally purchased a year back.

However, when trying to 'verify on the internet' as an option it keeps coming up with an error message saying that I am not connected to the internet, when clearly I am as I'm using this browser now. It's incredibly frustrating to be told I am not online when I'm 100% connected. 

How can I overcome this and allow my Microsoft programs to realise and accept the fact that I am actually connected? Windows Vista user.

Please help

Thanks

Word 2013 update

Posted: 15 Dec 2013 03:08 PM PST

On Friday December 13 I was unable to open any of my word files which were fully functional Thursday 12!  I get a message saying their is an update in progress and it wont take long. As of today I an still unable to open the files.

Word 2010 no blank page

Posted: 15 Dec 2013 01:07 PM PST

I am using Windows 7 and Microsoft Word 2010.

I have been using Word for ever. Now when I open word I don't get a blank page. It's whole page is full of squares. The squares are also on every saved doc that I try to open. I cannot do anything on Word.

Your help will be appreciated.

Thanks

Alex
Subscribe to: Posts (Atom)