Pages

Search

Microsoft Word - Get watermarrk to appear on every page

Microsoft Word - Get watermarrk to appear on every page

Get watermarrk to appear on every page

Posted: 20 Oct 2013 03:24 PM PDT

I have created a document in Word 2013 that I want to issue in draft form, so want to put the "Draft" watermark on to every page of the document.  However, I suspect that because I have a "Different First Page" header set, I can only either get the watermark on to the first page, or into the body of the document, but not on to both (ie, not on to every page).  Could some-one help, please?

Table row height will not adjust

Posted: 20 Oct 2013 03:17 PM PDT

I work in tables constantly and have just recently run into this problem. I have a grey row that I insert between scenes of a TV show transcript.  It has always been 0.08" high.  I have a macro I have been using for a long time that throws that grey bar in for me. It now inserts a full height grey row and  will not change height no matter what I try. The oddest thing is that once in a while it will work properly.  Other times, I can cut and paste a narrow bar from another document if I have to (tedious) but today I cannot do anything to make that row smaller.  And when I copy paste a narrow row from a previous document, it is full height. I am tearing my hear out here. Something I've been doing for years suddenly doesn't work.  And I need to deliver this document!

Microsoft Office not working

Posted: 20 Oct 2013 02:46 PM PDT

Every time I try to start Microsoft Office 2013 I get an error saying something went wrong and telling me to try and repair it. I have tried restarting my computer and tried repairing it through the control panel but it has not worked. this is the first time this has happened after a year of having Microsoft Office 2013 installed on my computer. 

Upgraded to office 2013 and now it won't open

Posted: 20 Oct 2013 01:34 PM PDT

So I bought Office 2010 and was able to get the free upgrade to Office 2013 when it became available last year. Office 2013 worked fine until I noticed recently that Office 2013 will not open. I didn't notice it wasn't working until recently. I get no error messages it just shows the windows 7 loading icon but nothing happens. I can open Office 2010 but not 2013. I tried the following but nothing happens. 

Control panel/uninstall program= it won't let me repair office 2013. It shows an icon for office 2010 but it shows a blank folder for office 2013. It won't even let me uninstall office 2013.

I can't even open Office 2013 in safe mode. I tried opening up in safe mode but it only opens up 2010. 

Word 2010 file icons appear as text file icons after upgrade to Win 8.1

Posted: 20 Oct 2013 09:45 AM PDT

I just upgraded from Windows 8 to 8.1. After reinstalling my MS Office 2010 Professional, all my Word document icons appear as text file icons. No other Office files have this issue.

When I double click, Word opens the docs just fine, so it's not a association problem.

It appears to only be an icon issue.

I already ran the Office Repair program.

Any advice?

Please help: problem opening document

Posted: 20 Oct 2013 08:38 AM PDT

Recently, my 365 2013 trial expired. I have been able to open all documents since then EXCEPT one, one of the my most important documents. I cannot even open it from my hotmail account, it simply says: Sorry, wordweb app ran into a problem opening this document. This particular document does say saved under Microsoft Word 97-2003, while the others are just saved as Microsoft Word Document. I have never had a problem opening this document before, regardless of what programme I have used, so I can't understand why this is the only document that will not open? I tried using openoffice also, and again ever document worked except this one. I have been told this document is corrupted too. If I purchase Word 97-2003, is the document guaranteed to work again? Please advise, I am so lost.

Why does rotated text in WORD 2010 revert when saved as a PDF document?

Posted: 20 Oct 2013 08:04 AM PDT

I have tried to keep some text rotated (upside down in this instance) within a text box in a WORD 2010 document - which has to be sent to a printer in .PDF format.  When printing it the text box turns around(!) and when saving as a PDF file this text box has also changed from being upside down to normal way round.  This is obviously a bug in WORD 2010 and so is there a fix for it?
Thank you,
Manda RR
FYO:  My husband has told me that it does work correctly in WORD 2013 on Windows 8 (printing as seen and saving as a PDF)

Word crashes when pressing define

Posted: 20 Oct 2013 07:50 AM PDT

Hello,

My word 2013 crashes whenever I try to define a highlighted word. When I do not log into my Microsoft account and press define, it prompts me to log in like usual. Upon logging in word then crashes and restarts.

I have tried both repair options, and also performed a full uninstall and re-install. I have logged out and in of my Microsoft account also. Any help would be appreciated.

Thanks,
Andrew.

Office 2013 'Something went wrong' notice

Posted: 20 Oct 2013 07:05 AM PDT

I bought Office 2013 last spring and have had no difficulties until this last Friday when I tried to open a word document and got the message 'something went wrong'.  I ended up re installing. Now 2 days later I have this problem again.  I don't see a similar issue.  I am just using the same product I have used for months on the same computer.

I have Windows 7 operating system and see a lot of issues for Windows 8 users - did something get changed for them that made it difficult for me? 

word 2013 has an unknown error

Posted: 20 Oct 2013 06:55 AM PDT

Hi Again,

This follows on from an earlier question about re-installing Office 2013 on Windows 8.

Unfortunately although I've reinstalled Office 2013 and everything else works, I have a problem in trying to open Word.  First off the "User Account Control" asks "Do you want to allow the following program to make changes to this computer?" and when I type Yes, it appears to start Word and then I get the message "We're sorry but Word has run into an error that is preventing it from working correctly. Word will need to closed as a result.  Would you like us to repair now?".  If I type Repair now it starts the whole uninstall/reinstall cycle all over again.  It seems to be a problem just for Word.
Any tips? For example can I reinstall by going to office.com/setup and using the Product Key?
Thanks
Peter

Mail Merge Document Dropping Record at Page Breaks

Posted: 20 Oct 2013 06:07 AM PDT

I created a mail merge document with a datasource exported field headers from our student data software package. The document is then created using the field headers from this datasource and is uploaded into the software package as template.  When running the merge template the document keeps dropping a record at each page break. I have reduced the number of record placements per page and even have added a forced page break but still have the same problem with a record being dropped when the next page is created.  The only solution I was able to come up with was create the merge document with fields placed on the number of pages the document would have in the in end i.e. a 37 page merge template.  When using this method all the records are merged correctly however it takes an extremely long time to get the merge template run.  

Can you give me any suggestions on how to get a template to merge without losing data?  This is a student directory so it was easy to noticed who was missing after the merge completed.  

Thanks.

ctrl + key not working

Posted: 20 Oct 2013 05:00 AM PDT

hello,
i have office 2010 and the problem occur only on OFFICE... it doesn't occur on notepad or any other software.
none of the ctrl + key shortcut works.. not ctrl +c, not ctrl +a, nothing...

I've read that there could be a bug related to SkypeClicktoCall service?

please advise what shall i do... i can't work like this.

I use win 8.

why do i have to sign in to view my documents

Posted: 20 Oct 2013 04:15 AM PDT

Every time I wish to go onto a document already in my document file I have to sign in to my Microsoft account or put in my activation key which I have done countless times.  I bought and downloaded office 13 from the Microsoft site.  I have never had this problem before.  Can someone please advise.  Thank you.

 

Arabic language proofing issue

Posted: 20 Oct 2013 12:23 AM PDT

Hi
I'm trying to get Microsoft Word 2010 to do spelling/grammar check for Arabic. I have installed the proofing tools pack for Arabic. When the install completed, it said to simply restart Word and I'd be ready to begin. I have restarted Word and selected Arabic as the proofing language (I've tried all the country variants), but it still says 'Not installed' and will not correct my spelling or grammar.
Please help!
Thanks
James

Printing Grayscale - Microsoft Office 2010 series

Posted: 19 Oct 2013 10:57 PM PDT

Hi, s
Since updating our PC to Windows7 OS and MS office2010 combination, an inconvent change found is that we can't select Grayscale printing from the Printing Preferences menu anymore.  
I recall "grayscale printing" used to be available as a check box in the "finishing" tab or somewhere in the Preference dialog box for Excel, Word, etc. when using HP printer. 

Since the new OS/MSoffice2010 combination does not show that choice, it's driving up the Color printing cost.  

I have Brother printer at other place, that is doing just fine. But, I find grayscale printing problem exists with HP printer.

A printer service place told me that we just need to install the most recent driver. 
Has anyone tried this and had a luck solving this problem?

** Driver updates are so often these days (HP) that our folks in my office got tired of "installing/updating" the driver when everyone busy.
If someone can tell "updating driver" is the confirmed/for sure solution for HP laserjet printer, please advise. 
 If any additional tips on updating the driver, or any other way to get grayscale printing, that would be really appreciated.

Microsoft Word 365

Posted: 19 Oct 2013 10:51 PM PDT

I  opted to take a trial of the Word 365 for a certain amount of time. That time has ended and now I am left with no Word at all. Is it either sign up for subscription  or go without any Word? During the free trial Word 365 was always closing, forcing me to start over again and again. Can I have my old Word back or do I have to subscribe to this new stuff?

Word 365 constantly reformatting new document

Posted: 19 Oct 2013 10:31 PM PDT

So I'm at the point of just uninstalling 365 and going back to Office 2010.

I'm in the process of creating several documents and Word insists on continually changing the formatting I'm using (reversing bolded and unbolded text) and changing the font size of what I'm typing (previous line will be in 14, enter and next line back in 12). It's been very random, and doesn't happen all the time, but happens very frequently. 

I've gone through all the auto format/auto correct/options boxes and have pretty much deselected everything to no avail. Is there something I'm missing or is this one of the "quirks" of the new Office that just assumes it knows what I want better than I do?

Running Windows 8 on a 1 year old Lenovo Thinkpad.

How to have two orientations (potrait and landscape) in the same document?

Posted: 19 Oct 2013 08:10 PM PDT

I would like to have two types of orientations (potrait and landscape) within the same document.  Is that possible and how to do it?

 

Whenever Word 365 is ended, it comes up with "Unexpected End" and proceeds to waste minutes searching and recovering files!

Posted: 19 Oct 2013 07:04 PM PDT

The exact wording is Microsoft Office has stopped working

Windows is searching for a solution to the problem.

 

Computer is an I7 8 Gb running Win 7 upgraded from Vista.

 

The problem also occurs with Excel where it spends ages recovering files even original files that have not been altered before exiting!

Word 2013 Mail Merge on Windows 8

Posted: 19 Oct 2013 06:05 PM PDT

When I attempt to Mail Merge using an existing list in Word 2013(On my windows 8 desktop) It displays all labels as <<Next Record>> If I attempt to put in an address block they read <<Address Block>>. How do I get it to display my recipients?

Can't "save as" a 2003 Word Document in Word 2013

Posted: 19 Oct 2013 05:33 PM PDT

Every time I try to "save as" a 2003 MS Word document in MS Word 2013 (Home and Business) and there is text and/or pictures in the header and/or footer, I only get the header and footer text and pictures but no body text and an extra 20 or so pages with no text (but still has the header and footer data)? I also cannot use the open previous version, but I can look in the saved data file and recover.??

Microsoft Works - Print Multiple Records/Page in Works

Microsoft Works - Print Multiple Records/Page in Works

Print Multiple Records/Page in Works

Posted: 02 Apr 2006 01:02 PM PDT

Re: In Word, can I create a document and link back to a MS Works database,
if so, how do I do that?

Hi Adam,

I have Works Suite 2001 which includes Works Word Processor version 6.0 and
Microsoft Word version 2000.

In my Microsoft Word Program to create a document, choose Tools, on it's
menu select Mail Merge, on it's expanded menu choose Document Type. In the
Document Type dialog window choose Form Letter, click OK. Open Data Source
dialog window displays, select desired data source.

The above action links the document to the data source.

Hope this helps,
Ken

"Dulmage" <com> wrote in message
news:googlegroups.com...
| Thanks again Ken. I have another question. In Word, can I create a
| document and link back to a MS Works database, if so, how do I do that?
|
|
| Adam
|

Maximizing Windows

Posted: 02 Apr 2006 08:40 AM PDT

You can't. The best you can do is drag out the normal window to fill
the screen, then close the window. Next time it opens the normal window
it should be the same size.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm


"Jeff Needle" <com> wrote in message
news:supernews.com... 

Collum Totals? Works Database 7.0

Posted: 02 Apr 2006 05:51 AM PDT

Great!!!!!

Thanks for the reply.
Ken

"JimMc" <microsoft.com> wrote in message
news:com...
| Thank you so much, that really worked!!!!!!!!
|
| "Ken" wrote:
|
| > Hi JimMc,
| >
| > The following copied from previous post.
| >
| > Ken
| > --------------------
| >
| > An example is given here, from Kevin James website:
| > http://www.btinternet.com/~kevin.james1/RunTot.wdb
| >
| > See the report for illustrated totals and in-line record
| > filtering.
| >
| >
| > Kevin James.
| > Tua'r Goleuni
| > Microsoft MVP (Works & Word) 1999-2006
| > Works Help & KB Links:
| > http://www.btinternet.com/~kevin.james1/WorksFAQ.htm
| >
| >
| > "Ken" <ne> wrote in message
| > news:%phx.gbl...
| > | Hi JimMc,
| > |
| > | Perhaps use a Running Total field.
| > |
| > | Example:
| > |
| > | Create an additional Field, name it RunningTotal.
| > |
| > | Insert this formula in RunningTotal field.
| > | =Sum(sale price+RunningTotal)
| > |
| > | Ken
| > |
| > | "JimMc" <microsoft.com> wrote in message
| > | news:com...
| > |
| > | | I have an inventory for an antique shop and would like to keep a
running
| > | | total in a collum called sale price. I add and delete items monthly.
| > |
| > |
| >
| >
| >

Sharing My Documents

Posted: 01 Apr 2006 01:45 PM PST

How to configure file sharing in Windows XP
http://support.microsoft.com/Default.aspx?kbid=304040



"Ross Deforrest" <rr.com> wrote in message
news:%phx.gbl...

| My problem:
| I have a laptop that is running XP home and a PC with XP professional.
I
| have shared various folders on the two machines and with the help of you
| people out there, I have figured out how to use batch files to backup
files
| from my laptop to the pc. The directories that I am sharing, are all
inside
| My Documents and sharing works great, from either machine, but when I try
to
| share My Documents, I can access the laptop My Docuemnts from the PC, but
| not the PC My documents from the Laptop. I get the error message:
|
| \\SSORD\My Documents is not accesable. You might not have permission to
| use the network resource. Contact the administrator of this server to
find
| out if you have access permissions
| access is denied
|
| When I check all of the settings in Sharing and security in properties of
My
| Documents on PC, I don't see any difference in the settings on the
| folders -- folders in My Documents -- that I am sharing that share with no
| problem both ways. Any ideas?
| Ross
|
|
|

Works Agenda

Posted: 30 Mar 2006 08:27 AM PST

Thanks Ken,

I appreciate your help in this matter!

Best Regards and have a great weekend!
Ellen

"Ken" <ne> wrote in message
news:phx.gbl... 

check log

Posted: 28 Mar 2006 07:31 PM PST

Thanks--Installed, and works great.
Dave Goodwin

"The Six Million Dollar Man" <"$$$$$$" wrote:
 

Works 8 calender font is too small to read when printed

Posted: 28 Mar 2006 01:19 PM PST

Thanks, but that prints in list form, rather than calender form.

"ernie" wrote:
 

Word addin - what is it for?

Posted: 28 Mar 2006 12:09 PM PST

Hi Peter,

I have Microsoft Works Suite 2001 which includes Works 6.0, Money, Encarta,
Picture It, Streets and Trips and Word 2000. Suspect you also have Works
Suite 2001. Open Works Suite Task Launcher, choose Help, choose Getting
Started, the Cover should display your version.

I find replying to post very instructive and learn a lot every time I do.

Am glad we discovered "Prompt to save Normal template", when checked, is
causing the irritating prompt.

I have several personal templates, including Normal.dot, which I keep a copy
of. If one becomes corrupt, and they have, I just replace it with the
backup copy.

Thanks for your reply,
Ken

"Peter in New Zealand" <peterbalATslingshotSPOTcoSPOTnz> wrote in message
news:phx.gbl...

| Ken, I appreciate all the trouble you have taken over my issue. I am
coming
| to the feeling that it is simply the addin installed by Works Suite, of
| which I have version 6.0. I have robust and up to date virus and spyware
| protection on board, there is nothing in my Word startup folder, there are
| no COM addins listed, and everything runs smoothly and sweetly at present.
| However, I DO have the option to prompt to save Normal.dot ticked, as I
| usually like to know if anything is messing with it behind my back.
|
| I have a number of macros programmed into normal.dot. They enable me to
show
| or hide the text boundary lines, paste unformatted text, and disable the
| insert key (a real MS irritation for years). I have used Word 97 and 2000
| for years, and the issue has never shown up until I installed Works Suite.
| So I guess the recognized behaviour here is showing up. Perhaps it has
| something to do with logging the history for the Works launcher.
|
| Whatever it is, it doesn't seem to be causing any problems except for this
| irritating prompt. Perhaps I should just go ahead and turn the prompt off
| and forget about it. After all, I use the software pretty intensively most
| days, and it very rarely ever hiccups on me.
|
| Yeah, think that's what I'll do. But it has been very instructive, and I
| have learned a lot from what you have suggested. I really appreciate that,
| and the time and effort you have put in on my behalf. Thanks again Ken.
|
| --
| Peter in New Zealand. (Pull the plug out to reply.)
| Collector of old cameras, tropical fish fancier, good coffee nutter, and
| compulsive computer fiddler.

VERY old Works 3.0 - Out of memory error

Posted: 28 Mar 2006 09:23 AM PST

Oh yes... I've done emulation of every selection starting with Win95. And
all of the memory settings from "Auto" to the maximums, HMA checked and
unchecked, protected checked and unchecked, screen dynamic memory yes and
no. All of these settings in countless combinations. I'm getting very
close to going crazy, I can almost see it from here <grin>.

"Jerry" <com> wrote in message
news:%phx.gbl... 

how do I know

Posted: 27 Mar 2006 06:57 PM PST

Hi joni,

Please see No. 6 in the list on this web page:

http://www.microsoft.com/products/works/international/update_1001.mspx#L6

HTH,
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works & Word) 1999-2006
Works Help & KB Links: http://www.btinternet.com/~kevin.james1/WorksFAQ.htm





"joni" <microsoft.com> wrote in message
news:com...
| which edition of works I have? It was installed when I bought my comp new
| last September..

Win95 driver for IBM memory Key 32 MB USB 2.0 (ASM 22P9026)

Posted: 27 Mar 2006 02:09 AM PST

I did not know that W95 supported UISB memory or USB for
that matter.

It might be easier to just install the W95 hard drive in you
target computer, making the jumpers slave on W95 drive and
master on your new system. Just copy all the files you
want. Then put the drive back.




"Largeloins" <microsoft.com> wrote in
message
news:com...
|I have an old pc running win95 with some useful stuff on it
and want to
| retrive some files via the above memory key. But it can't
find the driver
| when I plug the key in. I've tried the Win95 disk but
it's not on there.
| Does anyone know where I can get the right driver?
| --
| Thanx
| Largeloins

Works Task Launcher Invalid OS error

Posted: 26 Mar 2006 02:51 PM PST

This was the entire message. What we I had to do after contacting MS was to
delete my user and then create a new user and reload the software.
Apparently there was a corrupted file.
--
KH10000


"Michael Santovec" wrote:
 

Compatibility to Dragon Naturally Speaking 8 Professional?

Posted: 26 Mar 2006 02:43 PM PST

Hi,

I have neither Dragon Naturally Speaking, Windows 2000 PC or Works for
Windows 3.0.

But, here is a knowledge base article that addresses a Error in module
KRNL386.EXE.

Works 3.0 Error:
http://support.microsoft.com/kb/153732/en-us

Hope it helps,
Ken

"oti1" <microsoft.com> wrote in message
news:com...
| further information:
|
| version: Works for Windows 3.0
| Error message: Error in module KRNL386.EXE at 0003:0BD4
|
|

Windows users cannot open attachments created in Office 2008 Microsoft Office for Mac

Windows users cannot open attachments created in Office 2008 Microsoft Office for Mac

Windows users cannot open attachments created in Office 2008

Posted: 13 Sep 2008 07:26 AM PDT

I'm running 12.1.2, so yes.

Exchange 2003 Offline Address book and Mac users

Posted: 12 Sep 2008 09:33 AM PDT

net wrote:
 

Entourage doesn't have that feature available. However, if the users
have an Internet connection outside your company then they can still
access the GAL for lookups with the help of an AppleScript. Have a look
here:

"Accessing the Global Address List from Home"
<http://www.entourage.mvps.org/exchange/exchangelookups.html>

Users can always add frequently messaged contacts to their Contacts
list, which does remain cached locally.

Hope this helps!

--

bill

Entourage Help Page <http://entourage.mvps.org/>
Entourage Help Blog <http://blog.entourage.mvps.org/>
YouTalk <http://nine.pairlist.net/mailman/listinfo/youtalk>
Twitter: follow <http://twitter.com/meck>

How do I send an angry letter to Microsoft regarding Office 2008?

Posted: 12 Sep 2008 01:33 AM PDT

If it helps, I do not use any compression on my TIFFs (i.e. LZW), although it seems that's what Windows Word is complaining about (lack of decompression functionality).

Changing Icons

Posted: 11 Sep 2008 02:24 PM PDT

Bob,
many thanks for this. When I tried that initially, the Paste command was greyed out, but I guess that is because there was nothing on the clipboard. A happy man! :-))

Changing cursor direction

Posted: 11 Sep 2008 02:22 PM PDT

Bob,
another great answer. Not only that but a couple of useful articles to get me teeth into. Many thanks again! Iain

Moving a MS Access database to a Mac

Posted: 11 Sep 2008 09:45 AM PDT

com wrote: 

Hi,

You can move the Tables from Access to Microsoft Excel easily.

The queries, reports and input forms will not transfer. They will have
to be re-created from scratch in Excel.

See Using Microsoft Office as a Relational Database
http://www.agentjim.com/MVP/Excel/RelationalOffice.htm

-Jim

--
Jim Gordon
Mac MVP

MVPs are independent experts who are not affiliated with Microsoft.
http://mvp.support.microsoft.com/

Visit my blog
http://blog.360.yahoo.com/blog-i7JMeio7cqvhotIUwCzaJWq9

permission denied

Posted: 10 Sep 2008 06:00 PM PDT

Hi Leigh -

I think you missed a key point: The OP is on a Windows system, not a Mac.

Regards |:>)
Bob Jones
[MVP] Office:Mac



On 9/11/08 3:24 PM, in article 110920081224289325%ca,
"Leigh MacKay" <ca> wrote:
 

Office Programs Lock Up When Trying to Print

Posted: 10 Sep 2008 01:43 PM PDT

"Kwik Kopy Graphics " wrote:
 

See this page for help:

Troubleshooting Your User Account for a Problem
<http://www.entourage.mvps.org/troubleshoot/test_user.html>

We've eliminated #1, your database as part of the problem. Start with #2 and
continue testing. #2,3,4,8 are the steps you will need to find the culprit.

Because this is a print problem, then my guess it's not a Microsoft pref but
one of the other preferences.

To fully understand how some obscure preference can be the cause read the
thread "Shift h still isn't working"

Shift h still isn't working Resolution: Re: Shift h still isn't working
......
<http://www.mail-archive.com/letterrip.com/msg23460.htm
l> Here is the jist of the solution:
 

Let me know what you find.

--
Diane

MS Office programs won't launch or open

Posted: 10 Sep 2008 11:14 AM PDT

"com" wrote:
 

Do an "Archive & Install"

Archive and Install

1) Insert the Mac OS X Install Disc and double-click the Install Mac OS X
icon.

2) Follow the onscreen instructions. In the pane where you select the
destination disk, select your current Mac OS X disk (in most cases, it will
be the only one available).

3) Click Options. If you want to save your existing files, users, and
network settings, select ³Archive and Install,² and then select ³Preserve
Users and Network Settings.² If you want to erase everything on your
computer and reinstall Mac OS X, select ³Erase and Install.² You can¹t
recover erased data.

4) Click Continue.

5) Click Customize to select which parts of Mac OS X you¹d like to install,
or click Install to perform a basic installation (recommended).


Once the install has finished, your system will be at whatever level the
disk you have is. So if your Install DVD/CD disk is 10.5.0, that's what
version of OS will be on your Mac. You will need to download the appropriate
Combo Updater from Apple's site to restore the system to a higher version.
After you run the combo, allow Software Update to download and install any
additional updates.

If this does not fix your problems you will need to do an "Erase & Install".
The last time I had to do an "Archive & Install" the only thing I had to
re-install was my Microsoft keyboard software.

Hope this helps!

--
Diane

Running "All" Rules Doesn't work, but indviducal rules do

Posted: 09 Sep 2008 02:09 PM PDT

When you run All Rules, one of the rules is acting on the message before the
individual rule that works when run individually has a chance to move the
message. You can try moving the rule higher in the list.

--
Diane


"com" wrote:
 

How do I Install Office:mac 2004 Upgrade on new iMac

Posted: 09 Sep 2008 12:02 AM PDT

Thanks for the exact instructions. Glad you are happy. Next step be sure you
have a good backup strategy. It is not advised to let Time Machine backup
Entourage. If Entourage is open and being written to during a backup the
copy can be corrupt. Since Time Machine does this hourly, Entourage will
most likely be in use when backed up. See these alternatives.

Entourage and Time-Machine-like backup (creates chronological backup of
Identity can be used by both Tiger and Leopard allowing you to roll back to
previous dated backups.

<http://blog.entourage.mvps.org/2008/01/entourage_and_time_machine.html>

Alternative method to use Entourage and Time Machine (does a once a day or
whatever time period you select) This quits Entourage and the Microsoft
Database daemon allowing for once a day backup into Time Machine.

<http://blog.entourage.mvps.org/2008/01/alternative_method_to_use_entourage_
and_time_machine.html>


--
Diane

"" wrote:
 

Microsoft CRM - axonom Powertrak

Microsoft CRM - axonom Powertrak

axonom Powertrak

Posted: 12 Jul 2004 10:35 PM PDT

see my post dated 24 June


"JM" <microsoft.com> wrote in message
news:com... 
processes. would like some opinions on this from people who have implimented
it. 
want to do oodles of customization on your own, you almost have to have some
third party addons. what other addons are people using besides axonom and
what does it give you? 

Can MSCRM support multiple databases

Posted: 12 Jul 2004 06:09 PM PDT

We pretty much had to set up a separate domain with a
different AD and Exchange. The solution of using
Microsoft Virtual PC is probably the best solution if you
are just looking to test customizations and such.

Jairy

 
server for MSCRM to look at. Try using a virtual machine,
such as Microsoft Virtual PC or VMware. 
application? 
purposes but using the same 

create email activity using sdk

Posted: 12 Jul 2004 05:17 PM PDT

If replace the < and > characters don't solve your problem try put all HTML
code into a CDATA tag.
Eg.:
string message = "<[!CDATA[<html><body>Hello World!</body></html>]]>";

Hope this helps.
[]'s
Vinícius Pitta Lima de Araújo

"Jon" <ennovation.co.uk> escreveu na mensagem
news:2b1a501c468b6$ea0047c0$gbl... 

help with CRM1.2 deployment

Posted: 12 Jul 2004 02:14 PM PDT

It is due to the fact that MBS CRM uses pop-up windows.
Check that your clients allows for pop-up windows.
Sten 
sample database 
CRM server 
installed and 
localhost or 
access it 
simplely 

CRM 1.2 Feature Pack

Posted: 12 Jul 2004 12:39 PM PDT

We had a meeting with MS a few weeks ago, and this was
mentioned during the meeting. All I can say is don't get
any hopes up - we found the contents to be useless.

Other companies might benefit, but we thought it was
pretty lame.

David

 
get 

Crystal

Posted: 12 Jul 2004 09:41 AM PDT

You're confusing 2 different products.
Maybe you should outsource the solution and prevent some
headache in the future.

Disc 4 integrates crystal reports (a seperate industry
level report design program) with CRM, whereas you are
looking for a reason why the Crystal reporting service is
not running. I would open your Crystal manager and see if
all of those services are running and correctly linked
with your SQL database. It could be that your SQL server
is not set up correctly.

Good luck,

-Darin 
perfect. 
licenses. 
users setup with 
uses? The user 
default? I have tried 
9.2.0 to 9.2.2? 

modifying forms

Posted: 12 Jul 2004 08:26 AM PDT

We have had the same problem with the modified isv file
being overwritten by the original one.
Seems to happen when we publish customisations. We are
logged on as a different user from the one that installed
MSCRM (Administrator), and suspect this may be the cause
of the problem.

Ketil
 

Installing CRM on a domain controller

Posted: 12 Jul 2004 08:17 AM PDT

I've got CRM on a DC with windows SBS 2k3 and it's running
fine. We ran into some trouble with insufficient RAM, but
we put more in and the errors ceased. Just remember that
a 2k3 server w/DC & active directory will retard even the
fastest system and cause rediculous delays. 
quite happily on a 
solution (using SBS) by 
the CRM server - 
message 

Email and Email Queue

Posted: 12 Jul 2004 08:00 AM PDT

Yes, I sure have.

On Mon, 12 Jul 2004 08:54:25 -0700,
<microsoft.com> wrote:
 

Report Customization useful Links

Posted: 12 Jul 2004 02:47 AM PDT

beyond just adding them there is very little information on createing
reports for CRM. Perhaps the best thing you can do is use crystal reports to
open a few of the standard reports then see how they work. You can save
these reports under the reports-sales-miscallaneous folder as this folder is
empty by default.

There is a book called The Complete Reference - Crystal Reports 9.0 which is
usful.

--
John O'Donnell
Microsoft CRM MVP


<microsoft.com> wrote in message
news:2b0ef01c46828$e00b1620$gbl... 

Include a service in a sale

Posted: 12 Jul 2004 01:59 AM PDT

Thanks Sean

 
performed and then 
quote basis. 
Product is the best way 
wrote in message 
service 

MSCRM Distribution not getting created after redeployment

Posted: 12 Jul 2004 12:21 AM PDT

I had the same problem with the install.

I found the scripts but had a few problems with them. I
eventually got a distrubution database created, though it
did not have the same naming convention as the others. I
am now unsure if i should rename it.

The route of the problem was the SQL server agent not
running with the same username as the SQL server and CRM
server. 
Crystal but I had overlooked something and thankfully, it
is sorted now. 
create the MSCRM Distribution database? 
distribution database was to run 
same using the method 
your CRM system 
message 
com... 
redeployment too. But 
database is not 
for the tool. The 
server manager and 
server. 
regard is appreciated. 

cannot access reports remotely via web

Posted: 11 Jul 2004 11:54 PM PDT

Hi John,

I read it from somewhere that Crystal does not work with SSL but I've
checked with the network admin, SSL is not enabled. By the way, how do i
check whether SSL is or is not enabled? I just want to make sure for
myself... Thanks.

Regards,
JM

"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 
able 

IE Instable with CRM

Posted: 11 Jul 2004 11:24 PM PDT

Hi John!

Nope, but I do have Visual Studio and various dev stuff on the box.
But everything else works like a charm. I actually get: application not
responding error messages, I always post the error to MS in the hope that
they'll find the bug.

!Robert





"John O'Donnell" <com-nospam> wrote in
message news:%phx.gbl... 
monitoring 
as 
this 
I 

Custom Report

Posted: 11 Jul 2004 10:04 PM PDT

v9.2.2 of crystal report designer is what you need to
modify Microsoft CRM reports plus the add-on for Microsoft
CRM.

Designer is not part of the license for Microsoft CRM,
only the viewer (for 50 concurrent viewers I believe). if
you purchase v9 or greater of crystal report designer you
can download v9.2.2 for free (contact MBS Support for the
FTP link). After loading v9.2.2, you must apply the
Microsoft CRM addon. Together you can access the crystal
reports and modify/add to you heart's content.

Linda 
Enterprise, and if you 
server, not for 
addons from Microsoft. 

CRM on Small Business Server 2003

Posted: 11 Jul 2004 08:09 PM PDT

Hello Mat

before devling into your issue you should know that Microsoft released an
updated chapter 15 for the implementation guide which focuses on SBS 2003.
Here is the link to the revised chapter

http://www.microsoft.com/downloads/details.aspx?FamilyID=ddbb17dc-fe7f-4309-b03b-1fc1c4eb6a97&DisplayLang=en

--
John O'Donnell
Microsoft CRM MVP


"Mat" <microsoft.com> wrote in message
news:2aab601c467bd$b5e52630$gbl... 

Problems with CRM Email Router

Posted: 10 Jul 2004 10:26 AM PDT

Do you happen to know of any specific logging I should turn on in exchange to see error messages with the CRM router?

"Blaxer" wrote:
 

Reminder - Where can I find information on CRM?

Posted: 10 Jul 2004 09:56 AM PDT

John,

Congratulations to you and Matt. Well deserved!

Edwin Garst
www.epconsystems.com

"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 
July 
over 
that 

Customize Activities Views

Posted: 10 Jul 2004 06:22 AM PDT

Hi,

I changed the Sales Process Activities Subgrid using the URL you have
mentioned. I saved after the changes but the column I added is not showing
up in the
Activity Grid. Any thoughts?

Thanks,
Jaison.


"Jürgen Beck" <de> wrote in message
news:%phx.gbl... 
http://crmserver/tools/viewEditor/viewManager.aspx?id={00000000-0000-0000-00AA-000010001899} 

CRM Question

Posted: 09 Jul 2004 02:49 PM PDT

The current date is 2nd quarter 2005. This approximate date is of course
subject to change. As we get into 2005 we should see more details around the
release date and feature set so keep watching this newsgoup!

--
John O'Donnell
Microsoft CRM MVP


"Joe Quan" <microsoft.com> wrote in message
news:com... 
out. 
sort by company name when you use the Alpabets at the bottom, it get sorted
by name not company. Any information will be great. 

Can you create custom indexes in CRM DB

Posted: 09 Jul 2004 08:18 AM PDT

We have a dual 1.8 Xeon server. I don't think HW is a
problem.

I only call multiple times the execute query inside a
loop. For like 3 thousend records, it takes like 1/2 an
hour.I don't think the code is wrong, but calling a the
SDK through web services is slow.

Also, the reports use the custom keys to filter data, so
it takes a while to get some records.

Unable to access reports

Posted: 09 Jul 2004 04:41 AM PDT

I forget to mention that installing the updates fixed the "Please verify
that you have enough crystal license" error.

Thanks Peter.

Regards,
JM

"Peter Lynch" <com> wrote in message
news:%phx.gbl... 
start 
have 

Online CRM Tutorials

Posted: 09 Jul 2004 02:09 AM PDT

Also forgot to say, you also purchase the training materials from these
courses. While I would always recommend taking an instructor led course I do
find the quality of these training kits are good.

--
John O'Donnell
Microsoft CRM MVP


"John O'Donnell" <com-nospam> wrote in
message news:%phx.gbl... 
Subscribe to: Posts (Atom)