Pages

Search

Knoppix 3.4: How to get '|' character on keyboard - Forums Linux

Knoppix 3.4: How to get '|' character on keyboard - Forums Linux

Knoppix 3.4: How to get '|' character on keyboard

Posted: 30 Aug 2004 12:29 PM PDT

Maurice Batey <antispam.co.uk> wrote: 

Nothing to do with knoppix. Man xmodmap.

Anyway, the pipe symbol on a uk keyboard is normally where you describe
it, so apparently your key genrates the wrong keycode for the uk
keymap. Check!

Peter

minimal linux install from iso...

Posted: 28 Aug 2004 06:43 PM PDT

staale wrote: 
more than 190 LiveCDs are here!

http://www.frozentech.com/content/livecd.php

Fedora boot disk problems

Posted: 28 Aug 2004 02:29 PM PDT

On 28 Aug 2004 14:29:26 -0700, ADH
<edu> wrote: 

I think "rdev" is deprecated. Recent versions of the Linux kernel are not
made to be written directly to floppy disk without a boot loader.


--
If quizzes are quizzical, what are tests? (Think about it)

Using consistent mount points for USB & Firewire ieee1394 drives

Posted: 28 Aug 2004 08:31 AM PDT

begin com (hish) dedi ki:
 

You can mount your USB volumes based on volume-label instead of device
name. E.g:

As root issue:
# e2label /dev/sdc1 USBPART1

and then in /etc/fstab:
LABEL=USBPART1 /mnt/myusb1 ext3 defaults 1 2

so the first partition on the USB drive will always mount as /mnt/myusb1
regardless of which device it is on.
 

Alternatively you can get your USB device recognized consistently, as
explained in other posts.

--
Abdullah | aramazan@ |
Ramazanoglu | myrealbox |
________________| D.0.T cöm |__

a strange problem with modules 1/4... debian kernel 2.6.7-1-386

Posted: 28 Aug 2004 02:14 AM PDT

Bill Marcum wrote:
.... 

This is my output:
crw-rw-rw- 1 root root 10, 1 Jul 31 07:27 /dev/psaux

May it be a udev problem?
Somebody told me that some software installing could have messed up something
with modules and/or /dev directory.

--
Assioma di Baskerwill: Se fai retromarcia, qualcuno passera' dietro.

RRB SoHE

Any way to avoid using GRUB

Posted: 27 Aug 2004 06:19 PM PDT

"Christopher Bogart" <com> writes:

]I'm fairly new to Linux and have a question:

]I recently installed Red Hat 9 on a 40 GB drive (1st drive is 40 GB XP)

]I bought the 2nd drive so I could work on it independently from the XP OS.
]During an installation a few months ago, I was able to disable the XP drive
]in the BIOS and enable the 2nd drive whenever I wanted to play with Linux.

]Today in the Linux setup I disabled the boot loader and also deleted the DOS
]boot from the setup. Yet, the GRUB still appears. The only way I can get
]into either the XP or Linux OS is enabling both drives in the BIOS. If the
]XP drive is enabled and the Linux is not, it's giving me a GRUB Hard drive
]error. If the Linux drive is enabled and the XP is not, it goes straight to
]the GRUB dos prompt.

]Is there a way around this?

]The Linux setup doesn't let you change which HD the GRUB is installed.


You could use lilo.
Something has to load the operating system. The bios is too stupid and has
noidea where the operating systems are loaded on the disk. This is done by
a bootloader. Aso Something has to uncompress the linux kenrel, and jump to
the beginning of the kernel code . These things ae done by lilo or grub.
Linux can boot all sorts of operating systems. Including Windows.
HOwever if you would rather use the Windows bootloader to load the OS
youcan but then lilo or grub has to be installed in the partition that
contains /boot.

KNotify going in an endless loop

Posted: 27 Aug 2004 03:58 PM PDT

Thanks to everybody! Everything is ok now!

Arts is now disabled. Sound card still set for full duplex and working as
before.

KMail: Copies of postings to Mailing Lists

Posted: 27 Aug 2004 09:29 AM PDT

On Fri, 27 Aug 2004 09:51:07 -0700, Paul Lutus wrote:
 

Mine gets filtered into the mailing-list folder.
 

Good point! I'll just keep deleting one when the posted copy arrives.

--
Maurice Batey
(Retired in Hampshire, UK)
www.maurice.eurobell.co.uk
(Remove 'antispam.' to reply by email)

pcnfsd or hlcnfsd in fedora

Posted: 27 Aug 2004 08:55 AM PDT


"Bill Marcum" <com.urgent> wrote in message
news:localnet... 

Besides how badly pcnfsd sucked when Sun wrote it, and for which they should
have been castigated and had all their servers replaced with Samba servers
to do things via SMB instead of via NFS?

Oh, wait, I did that years ago. Never mind.....

Hmmm...how to see Windows from LInux?

Posted: 26 Aug 2004 07:46 PM PDT

begin com (David Hill) dedi ki:
 

Find out which partition is "E" on, either with graphical admin utilities
provided with your distro, or from the command line (as root):
# cfdisk /dev/hda (touch nothing, and exit via "Q")

Assuming that,
hda1 -> C
hda2 -> E
hda5 -> Linux

either add that partition as a mount point via graphical admin
utilities provided with your distro, or edit /etc/fstab (as root) and add
the line below:
/dev/hda2 /mnt/e auto defaults 0 0

It is a good practice to save your original fstab via
cp -a /etc/fstab /etc/fstab.orj

and create the mount point via:
mkdir /mnt/e

P.S: It is a good practice to save your original fstab via
# cp -a /etc/fstab /etc/fstab.orj

P.P.S: I suggest you change E from NTFS to FAT32, so that E will be
accessed r/w by Linux (as opposed to r/o).

P.P.P.S: It is also a good practice to split Linux installation to 2
partitions, one for /home (as much as you can allocate) and the other for
the rest (4-6G). It is analogous to splitting a Windows installation to C
and D. When you reinstall Linux, only the system will be written over.
Your /home partition would be intact (depending on your choice while
installing), so you would be able to carry your personal data from one
install to another.

--
Abdullah | aramazan@ |
Ramazanoglu | myrealbox |
________________| D.0.T cöm |__

Boot Problem after Install

Posted: 24 Aug 2004 01:42 AM PDT

Dave Burton wrote:
 

Another frequent cause is this awful LABEL usage
in /etc/grub.conf and /etc/fstab .
You could use the first CD in rescue mode
to try putting in the real devices /dev/hda3, etc, in these files.


--
Timothy Murphy
e-mail (<80k only): tim /at/ birdsnest.maths.tcd.ie
tel: +353-86-2336090, +353-1-2842366
s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

Microsoft CRM - Log on with credentials

Microsoft CRM - Log on with credentials

Log on with credentials

Posted: 02 Apr 2004 08:49 AM PST

That is EXACTLY what I needed

Thanks !!


"Andrea Worley" <com> wrote in message
news:com... 
Internet Explorer, go to Tools | Internet Options, security tab, select
Local Intranet, then the Custom Level Button. Scroll to the bottom of the
screen and check 'Prompt for user name and password'. Then everytime you
open CRM in the broswer you can log in as someone different. 
error. 

Is there a way to build an account from an existing Outlook 2003/Exchange 2003 Contact?

Posted: 02 Apr 2004 08:22 AM PST

I installed the migration framework, but I have not tried to use it. I just
have a hundred or so accounts to create, and I guess I can just cut and
paste data between existing contacts and the Account form. I just want to
make sure there was not something simple in the box to do this.

Bill Walter

"net" <microsoft.com> wrote in message
news:12faa01c418e3$9ca68ca0$gbl... 

Sales for Outlook ...does it work on 2003 Office?

Posted: 02 Apr 2004 06:59 AM PST

Certainly v1.2 of Sales for Outlook works with Microsoft
Office Outlook 2003. 

Attaching activities to leads

Posted: 02 Apr 2004 03:08 AM PST

Thanks Matt,

I do have a professional license.
I'm on my way to follow your directions.
Gracias. (;-D)

 
accomplish this would be via 
activity could have been 
either need to delete & 
facility to do something 
<microsoft.com> 

MSCRM Outlook Client + c360/ISV

Posted: 02 Apr 2004 02:11 AM PST

Mary,

All our tools (and all ISV solutions for that matter) work in the Outlook
client in ONLINE mode only. When users go offline, Microsoft CRM does not
hide the links which may lead users to believe that they can use these tools
but it fails when they click on the links because CRM is attempting to
connect to your web server.

To enable SearchPac in the Oulook client: take a look at section 7 on pages
8 and 9 of the installation guide. Also, the SearchPac ZIP file contains a
sample configuration file that you can simply save in the _resources folder
on your CRM server to enable this.

-Jeremie Desautels
c360 Solutions


"Mary" <microsoft.com> wrote in message
news:com... 
client (either on or offline)? 
Accounts), using custom tables sitting outside of the MSCRM DB but within
SQL Server (& our own aspx pages etc). We have been successful on the web
client, but I'm looking for a rough idea about how complex it would be to
implement on the Outlook client Offline. 
however I'm not so sure about the aspx pages would work - does it require a
great deal of extra configuration? Is it even possible? 

IE Browser Problems

Posted: 01 Apr 2004 09:32 PM PST

I have also had this problem except on a clean install. I am testing it for use for some customers, and have one server and one workstation. When I try to browse to the user interface sometimes I get there and sometimes I don't. Once there I can't access all of the tabs..
Brad

Outlook Plugin does not work

Posted: 01 Apr 2004 06:17 PM PST

You need to remove the MSDE install and the registry keys that are created for
MSCRM.

Matt Parks

----------------------------------------
----------------------------------------
On Thu, 1 Apr 2004 18:43:49 -0800, "Joshua"
<microsoft.com> wrote:

Found my problem kind of, I had originally installed it
under another profile. I backed out of that install but
still can't get it to function. Any idea how to
completely remove from a certain profile so I can install
to another?

Joshua
 

Dates in Workflow

Posted: 01 Apr 2004 04:21 PM PST

Hi Cindy,

Actually It's one problem from Ms.CRM that it can't handle date in workflow
if you use it as is. FYI, Your problem is almost the same with me but now, I
already can handle it. I want to send email to each contact who got birthday
today.
First, you have to add boolean field in contact
Second, create Workflow that use that field. If that field True create your
action (Use Manual Event), don't forget to update that field into false
after it
Third, create console app. that can execute that workflow by using CRM SDK
1.2
Forth, create a job in SQL, give True value in that field if today is their
birthday and run your console app.
And then schedule it to run everyday.

If the other reader have another solution, please tell me it.

Good luck,
Frans Cahyadi, MCSD, MCDBA, MCAD.NET
Technology and Solution Support Manager
Puspa Intimedia Internusa, PT

"Cindy Mikeworth" <com> wrote in message
news:supernews.com... 

CRM Minimum Specs

Posted: 01 Apr 2004 10:21 AM PST

Thanks Matt, I did search the IG for 'exchange' and 2000 and the only thing
that came up was the Outlook 2000 which I thought was odd. I printed the
entire IG yesterday afternoon and started reading and came across it a
couple hours later..

Damn Adobe blows heh

E-Mail Exchange Router

Posted: 01 Apr 2004 08:06 AM PST

Am I reading this correctly? You sending an email from a CRM user using Outlook
Express and you want it to get captured in CRM? This is not supported. If you
want the outbound email to be put into CRM, it needs to originate in CRM.

Matt Parks

----------------------------------------
----------------------------------------
On 1 Apr 2004 08:06:59 -0800, com.uy (Luis Azevedo) wrote:

I've installed the CRM/Exchange E/Mail Router and I'm trying to
capture outgoing e/mails from CRM users of my domain to external
contacts (created in CRM) using Outlook Express. I haven't had any
positive results so far. I wonder if I have to configure additionals
features in exchange.

Comparison Table

Posted: 01 Apr 2004 07:22 AM PST

MS CRM claims to do some of Saleslogix and Accpac/et al.
I am living on this newsgroup wondering if I can use CRM internally to run
my shop.

If MS CRM 1.2 could do 50% of the more mature CRM's, I would implement it in
a second.

MS CRM 1.2 looks good (especially compared to 1.0), but.... who is using it
in production?
Where are the success stories?

Lots of potential, but maybe it is like Access 1.0.
Access 2.0 was the killer app when it took off.





-Bill



"John" <com> wrote in message
news:phx.gbl... 
and 

Cassini server

Posted: 01 Apr 2004 06:50 AM PST

com wrote: 

Hello Rajesh,

just take care that your pages are located in the local crm-webfolder.

Otherwise it could be a little bit tricky.

--
Jürgen Beck
MCSD.NET, MCDBA, MCSE, MCT, MVP
MCP CRM Application/Installation/Customization
www.Juergen-Beck.de

Fiscal year screwup

Posted: 01 Apr 2004 04:20 AM PST

HI Dave,

that would be great. I have raised a call, but as yet
haven't had a response.

If you dig them up, drop me a line at the email address
above

Question, were they CRM 1.0, or 1.2

Baz
 
group 

Microsoft Word - Inserting a jpeg file into a Word document results in a thin line outline but not the graphic

Microsoft Word - Inserting a jpeg file into a Word document results in a thin line outline but not the graphic

Inserting a jpeg file into a Word document results in a thin line outline but not the graphic

Posted: 14 Jun 2013 11:36 AM PDT

I have attempted to insert a jpeg and a gif configured graphic into a Word document with the same result each time.  An outline appears as a thin solid line but the graphic itself does not show up.  I am using the Insert/Picture path and have selected the graphic I want to insert, then selecting Insert.

How to display "New From Existing Document" dialog box?

Posted: 14 Jun 2013 08:37 AM PDT

I'm looking for a quicker way to display the "New From Existing Document" dialog box that appears when you choose Office button -> New -> New from existing ... 

 

So far, I have:

  • looked through All Commands in keyboard customization
  • checked the list of wdDialog constants available for a VBA macro
  • recorded a macro while clicking the button (the result is the Documents.Add Template:= command

Thanks in advance for any help with this.

 

- Colleen

Nvidia 210M crashes Office 2013.

Posted: 13 Jun 2013 12:58 PM PDT

Never had any problems with Office 2010 Pro Plus.  But after upgrading to Office 2013 Pro Plus Office constantly crashes.  Just out of curiosity I switched my computer to use the low power Intel Video card and Office 2013 doesn't crash anymore.

I am using the latest graphics driver provided by Asus for the UL50VT.

The video card is Nvidia 210M but Asus doesn't allow Nvidia's driver to be used.  

Any help resolving this issue would be greatly appreciated.

Using Microsoft Word 2010

Posted: 13 Jun 2013 12:13 PM PDT

I have created an image and added text beside it, using Word 2010; how can I close up the vertical spacing between the Image and the text?

Index has multiple entries (Word 2010)

Posted: 13 Jun 2013 10:13 AM PDT

I am having consistent problems in my indexes. Some index marks in the text that are identical (copied from one page and pasted onto the other pages) are shown twice in the index. Sometimes one of the extras has no page number associated with it. I suspect that the problem has something to do with Review and how it acts. Is there any way to totally disable Review? I never use it and I always hav

Problems opening documents made in Word 2007 after installing 2010 student version.

Posted: 13 Jun 2013 07:39 AM PDT

Installed 2010 student version but left 2007 programs that were not in 2010 student version. Install deleted 2007 Word, Excel and Powerpoint. Worked fine for months but now everytime I try to open a document made in Word 2007 and sometimes any Word document, computer screen goes to installing office 2007.  If click stop installation, cancel, etc through 3 screens the document eventually opens.

Computer now erratic; crashes in Word, freezing of cursor and turning computer off.  Microsoft Security Essentials has not picked up any viruses.  Could the problems be from conflict between 2007 and 2010?

Should I let the computer reinstall Office 2007? Will it delete 2010?

Macro range.word.count high

Posted: 12 Jun 2013 09:26 PM PDT

I am trying to write a macro to Return the Word count for each questions. I can make a selection but range.words.count returns a higher number than the Status bar word count (7 c.f. 5 or 256 Cf.  219) The specific Code I am using is

    'Go to Top of Documnet
    Selection.HomeKey Unit:=wdStory
    ' Skip Cover Sheet
    Application.Browser.Target = wdBrowsePage
    Application.Browser.Next
    'Store Current position
    StartLocation = Selection.Range.Start
    'Move To Next Heading
    Application.Browser.Target = wdBrowseHeading
    Application.Browser.Next
    EndLocation = Selection.Range.Start
   ' Select fromstart to end
    ActiveDocument.Range(Start:=StartLocation, End:=EndLocation).Select
    ' Get and Return the word count
    wc = Selection.Range.Words.Count
    MsgBox ("Words for this section are " & wc)

I can't see I have done something wrong inthe code; I can only see that the microsoft Selection object has the wrong value. Adding a watch to the selection also shows the High Value. Yet in the document at the same time the actual word count is the lower number ( and correct) 

To test : On the second page of the document place three paragraphs, Tow of style Heading 1 and the Middle paragraph a known number of words. 

Font problem with Word 10

Posted: 12 Jun 2013 07:34 PM PDT

Using Word 2010 running on Windows 8.  My font keep getting larger and larger.  The size of font 12 is about one inch tall on my display.  In order to make it look reasonable I need to set the font to 4 or lower.  What is causing this problem?

Word drawing grainy/pixily after web publishing

Posted: 12 Jun 2013 07:17 PM PDT

I created a drawing in Word 2003 for my business.  It looks great. 
When I copy and paste it to Microsoft Front Page 2003 it looks great, after publishing to the web, it looks very grainy/pixily.  How can I publish MS Word drawings to the web without this grainy appearance?  

editing the header differently for each page of a document

Posted: 12 Jun 2013 09:51 AM PDT

I have edited an existing document and need to amend the page numbers by editing the header on each page (so that it links correctly to the index).

 

However every time I edit the header on 1 page it automatically updates every other page, making my index meaningless! How do I override this so I

 

can edit the header on every page so something different is displayed ie the index page reference)?

 

I m hoping someone understands this rambling?!! Thank you, Kat

 

 (moved from feedback by moderator)

Page numbering is a chapter number behind

Posted: 11 Jun 2013 01:24 PM PDT

I broke my document into sections and set page numbering in each section to include the chapter number. The pages in Section 1 are numbered correctly--I-1, I-2, I-3, etc. But when Section 2 begins, the chapter heading contains 2, but the page numbers are once again I-1, I-2, I-3, etc. When we get to Section 3 (whose heading contains the correct number 3), the page numbers are II-1, II-2, II-3; Section 4 is III-1, III-2, etc., and the remaining chapters include the previous chapter number in their pages as well. I'm using the same Heading 1 style for the beginning of each section. The Page Number Format settings for each section are Include chapter number, start with style Heading 1, Use hyphen separator, and Page numbering Start at 0. Section breaks are all continuous. What might I be doing wrong?

My files change to Read-only arbitrarily

Posted: 11 Jun 2013 12:22 AM PDT

Win 7 64-bit  I have Office 2010. 
My problem has NOT been answered. 
I access my files with no problem. 
Then sometimes (maybe 5% of the time) after I have done some editing, the file changes to READ-ONLY all by itself. 
I want to know how to stop Word from arbitrarily changing the status of the file. 
Thankyou. 
Paul

Microsoft Works - Passowrd Protect

Microsoft Works - Passowrd Protect

Passowrd Protect

Posted: 02 Dec 2004 12:23 AM PST



"faith4hope" wrote:
 


That is not cool. Tx for responding. Seems that is a dinosaur additive
that would be an automatic. Dag gone it!

No color

Posted: 01 Dec 2004 08:59 PM PST

Hi Mike!

Yes, it's printing in shades of gray.
Printer options are set to "normal" and "color".
I even went into "properties" and "advanced". I saw nothing, that I could
tell, that would cause this problem. It seems to be universal throughout the
MSWorks programs such as brochures, letters, ect.
I also restarted the computer hoping it was one of those pesky gremlins.

I did a test page using MSWorks..."This is a test" in various color fonts.
It came out
grey scale

The printer iself, (HP PCS) is ok, I just made a color copy and it came out
fine.

This is weird!

S

Can MS Works open MS Word documents ?

Posted: 01 Dec 2004 11:12 AM PST

1) Are you getting an error message? The issue may be that Word Viewer is not set as the
default application for DOC files. In order to fix the file association, see:
the Identifying Attachment File Types and Setting File Associations section of
Decoding Internet Attachments - A Tutorial
http://pages.prodigy.net/michael_santovec/decode.htm#identify

2) Since I have Office Installed, I don't have the Word Viewer installed. But I expect
that you can copy/paste text from it into another program.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm


"ava cohen" <com> wrote in message
news:google.com... 

SP2 not available

Posted: 01 Dec 2004 08:49 AM PST

I believe SP1 is already in SP2.
Dannie

"Patscga" <com> wrote in message
news:aol.com... 

Recognition of Works 4.5a by Word

Posted: 30 Nov 2004 01:33 AM PST

On Tue, 30 Nov 2004 10:45:58 -0800, "Horatio"
<microsoft.com> wrote:

The reason 

You've lost me there - I've never run into that problem, and I've been
using Works to mail-merge for years. I'll have to pass the ball to
someone else...


Blessed be, for sure...

EULA error Works Suite 2005

Posted: 29 Nov 2004 12:15 PM PST

Jimw thanks for the honest answer. I was able to install the separate
programs. I can't wait to see if there are many glitches in those. Stuck with
a suite when I should have gone for single room!

"Jimw" wrote:
 

Starting A Database

Posted: 28 Nov 2004 07:27 PM PST

Hi Andrew,

I notice the Windows operating system "Address Book" uses only one field for
"Title".

Ken

"Andrew" <microsoft.com> wrote in message
news:com...
When making fields do you have to make seperate fields for each title ?
Example Mr, Mr&Mrs, Mrs,Miss.

xmas labels

Posted: 27 Nov 2004 05:03 PM PST

Re-install your old Works in a different directory(you can have both). It
will read your Work7 database and merge it to xmas labels much easier.
Jeff
"JACKLE1950" <com> wrote in message
news:aol.com... 
cannot 
folllow 

Works 7.2 problem

Posted: 27 Nov 2004 11:29 AM PST

On some computer systems. Even through you can use standby.
When using standby and resuming from standby Works has a problem
loading. Restarting the computer will fix it. This does not matter
what os you are using.

Greg R
 
 

Installing Autoroute 2000 to hard drive

Posted: 24 Nov 2004 07:09 AM PST

Thanks for the response Kevin. I have since resolved the problem, I tried
reinstalling with Norton anti virus turned off, and it installed ok. Many
thanks John
"Kevin James - MSMVP Works" wrote:
 

Works "spurious" error messages

Posted: 22 Nov 2004 06:49 PM PST

Kevin,

Yes, I do have multiple versions of spreadsheet running at times. What I
actually meant was that I have several spreadsheets, and when I open any one
of them the error occurs, but in point of fact there often are several
entries for wkss.exe in the Task Manager. Is this normal?

Sometimes. I get yet another message to the effect that the file doesn't
exist or cannot be opened, and I solve this by going to Task Manager and
closing every occurrence of wkss.exe.

The KB article does quote the error message that I am getting,
viz.
Works cannot complete the task. Try restarting Windows, or reinstalling
Works.

I am running Windows XP Home SP2 and Works Suite 2002 and am logged in as an
Administrator (the only other account than Administrator).

The errors are annoying, but not fatal. Only occassionally have I found that
my edits on a spreadsheet were not saved.

Any suggestions would be welcome.

P.S. Sorry for the delay in replying but since I received an EMail re your
reply, I have unable to connect to this Microsoft site. Today, it came good
again!

Cheers
"Kevin James - MSMVP Works" wrote:
 

Reinstalling Office 97 - Microsoft Office forums

Reinstalling Office 97 - Microsoft Office forums

Reinstalling Office 97

Posted: 01 Sep 2004 05:33 PM PDT

You might have a hard time calling MS, since OFF97 is no longer supported.


"Howard Kaikow" <com> wrote in message
news:ectM%phx.gbl... 

Runtime Error! (Office 2003 Uninstalled/Office XP Prof. installed)

Posted: 01 Sep 2004 03:30 PM PDT

Joni,
btdt.

Chris Schatte

use the Office Online web based newsreader here:
http://www.microsoft.com/office/community/en-us/default.mspx
In Office System 2003 applications:
Help/Assistance Pane/open Communities


"microsoft.com" wrote:
 

Outlook 2003 and Outlook 2002 may crash after you install Office XP on a compute

Posted: 01 Sep 2004 08:50 AM PDT

That's OK, Gordon.....

I was able to "Save As" in the method Sue referenced when
I found it in Outlook Help, BUT, another problem is
snagging me.

I am SO frustrated and hope there is an answer out there!!

Bye!

Why does Office 97 not work after installing Windows XP SP2?

Posted: 31 Aug 2004 04:20 PM PDT

THAT was rather uncalled for - this person is just doing his job - no need
to jump down his throat. If you would like folks to just post the URL to
the MSKB, say so and leave the personal attacks out of it.

I am sure that approach would be more likely to produce the result you want.


--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.

After searching google.groups.com and finding no answer, Dave asked:

| Hey Vishal,
|
| Why do you copy and paste the entire KB article when just a link
| would do very nicely indeed. Are you trying to prove anything here?
| This is not a call centre you know. There is no need for the
| transcript of your call centre standard message which you are
| required to read out slavishly to Microsoft customers.
|
| Just give us the link to the kb article like this:
|
| http://support.microsoft.com/default.aspx?scid=kb;en-us;285909
|
| Now show us that you can understand and follow these instructions
| slavishly!
|
| Thank you.
|
|
| "vishal subramaniam (msft)" wrote:
| <snip>

Will I lose Access 2002 if I install Office 2003

Posted: 31 Aug 2004 01:21 PM PDT

Okay, thanks. I'll give it a try.


On Wed, 1 Sep 2004 10:48:24 -0400, "Timothy L"
<com> wrote:
 

Changing registration name in Win98 with Office2000

Posted: 31 Aug 2004 08:27 AM PDT

To rid of that retched error, follow the instructions located in this
Microsoft Knowledge Base Article
http://support.microsoft.com/?kbid=229507


If that is not the error you are receiving, please reply and be a bit more
specific regarding the details of the error
..


"msnews.microsoft.com" <com> wrote in message
news:phx.gbl... 

convert cd to diskette

Posted: 31 Aug 2004 04:42 AM PDT

 
<microsoft.com> wrote in 
we 
blue 
you! 

I can not update Office 2000 why?

Posted: 30 Aug 2004 02:59 PM PDT

From: com (vishal subramaniam (msft))
Subject: RE: office pro will not reinstall on new computer
Newsgroups: microsoft.public.office.setup

microsoft.com
ISSUE:
=========
From: =?Utf-8?B?RkRB?= <com>
Subject: I can not update Office 2000 why?
Date: Mon, 30 Aug 2004 14:59:01 -0700
Newsgroups: microsoft.public.office.setup

RESOLUTION:
================
OFF2000: You Cannot Update Office to SP2 Without Installing the Outlook
Security Update
View products that this article applies to.
This article was previously published under Q299798
SUMMARY
When you apply the administrative version of the Microsoft Office 2000
Service Pack 2 (SP2) update to an administrative installation of Office
2000, the Outlook Security Update is automatically applied. There is no way
to apply SP2 without the Outlook Security Update.
MORE INFORMATION
The administrative update files for SP2 are Windows Installer patches (.msp
files) that you apply to your administrative share by using a command line
with specific parameters. The Out2kmst.msp, Pptmst.msp, and Excelmst.msp
files update the registry, and the Sp2admin.msp file updates the files on
the computer.

You cannot omit the installation of the Out2kmst.msp file (even if you do
not want the Microsoft Outlook E-mail Security Update) because the
necessary registry updates are contained in the file. Updated versions of
all .msp files must be applied to the computer for the upgrade to succeed.
If you do not apply all .msp files, you place the Office 2000 SP2
Administrative image in an unsupported state.

For additional information about deploying Office 2000 SP2, browse to the
following Microsoft Web site and refer to the Microsoft Office Resource
Kit:
http://www.microsoft.com/office/ork/2000/journ/OffSP2.htm

LINKS:
=========
http://support.microsoft.com/?kbid=299798
This posting is provided "AS IS" with no warranties, and confers no rights.

Account export

Posted: 30 Aug 2004 01:15 PM PDT

Any addins installed on one and not the other are either broken or will
result in errors. It's better to recreate the accounts or use a 3rd party
tool.
http://www.slipstick.com/config/backup.htm#tools

--
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Coauthor, OneNote 2003 for Windows (Visual QuickStart Guide)
Author, Google and Other Search Engines (Visual QuickStart Guide)

Outlook Tips: http://www.outlook-tips.net/
Outlook & Exchange Solutions Center: http://www.slipstick.com
Join OneNote Tips mailing list: http://www.onenote-tips.net/

Vote for your favorite Outlook and Exchange utilities in the
Slipstick Ratings Raffle at http://www.slipstick.com/contest/

"Brian Tillman" <com> wrote in message
news:uuRlt$phx.gbl... 

Move Office from one pc to another

Posted: 30 Aug 2004 08:47 AM PDT

Thank you . It worked great.
Jim

"Timothy L" <com> wrote in message
news:phx.gbl... 
as 
Panel 
install 
this 
this 
opposite 
need 
for 

Open Excel file via DoubleClicke doesn't work.

Posted: 30 Aug 2004 06:25 AM PDT

Thank you for this resolution. My problem is, that the ignore function
of Microsft Excel is allready desabled. This morning we started to
reinstall the Computer. Nevertheless, thank you. Perhaps it will be
helpfull at an other time.


vishal subramaniam (msft) wrote: 

Is USA on vacation?

Posted: 30 Aug 2004 02:00 AM PDT


"Milly Staples [MVP - Outlook]" <org>
wrote in message news:%23Mi%phx.gbl... 

All your response did was enable a dysfunctional game for two to play.

Your response was humorous? Well, it went over like a lead balloon,
like deciding to pat an angrily barking dog on the head has a reasonable
chance of pacifying the dog rather than getting your hand bitten.

Your response baited him as could well be expected and now you
want to pretend to be the victim. And I am quite surprised that the
corporate Microsoft entity which is composed of human beings making
judgments failed to produce guidelines about ignoring John.Doe posts
instead of fueling the fire with your supposedly "humorous" gibe.

This is not the first time I've seen you choose to defend the faith against
troll attacks. It is considered codependent to engage in such behavior.
Your response was either a lie or you are far out of touch with reality.

It annoyed me to see you claim your subtle retaliation was justified
and "above" his tactics. You poked him to see him squeal. Since when
does a corporate entity not follow instructions made by human
authority which have moral/living consequences for an entire culture?

You attempted to represent MS as an "inanimate object" which is
not responsible for its decisions, and that John.Doe was directing
his animosity towards such an inanimate object, when in fact he wrote:
"I do not beieve in enriching rich jerks!" which is a personal perspective.

I might condemn the Alcohol Industry for promoting alcohol to teenagers
which led to Mothers Against Drunk Driving just because I may not know
the names of the individuals involved who decided to target their
advertising.
I may also want to condemn the Tobacco Industry for tempting people to
smoke when the directors knew that it would cause cancer. Because
corporations enclose those industries does not make the corporation
innocent because it does not have a personal identity since its polices are
determined by humans who have faces and names.

So there is nothing wrong with using a corporation name as a shortcut to
meaning the people who are responsible, though I may not know their names.
Your post twisted this legitimate choice.

John.Doe certainly appears to be a woman hater. I see nothing wrong with
your rejecting such a view. But his view and your response to it don't
belong on this forum. As an MVP, you are not above setting a standard
on this forum, but I believe should demonstrate a policy of non-response
to trolls. You do the same thing on other occasions. The degree that my
post is off-topic and cluttering up this newsgroup has been encouraged
by your example. I think as a representative of Microsoft you should act
with professionalism and keep your personal issues out of your responses.

Incidentally, I am not an MS basher. I think computer progress would
be at least eight years lagging in its appearance to the home user if
Microsoft hadn't propelled computer usability and hardware advancement.

I don't want to read your crap any more than John.Doe's crap,
and if you think my post is crap, it was toppled by your dominoe.



 

Store personal settings and personal templates in one location fo.

Posted: 29 Aug 2004 03:45 PM PDT

That is true for Word and some of the other applications but Outlook
Signature files and PowerPoint templates you need to hunt for. I would like
to see all items with the ablity to store in one central directory for easy
migration to a new system without all the hunting. It would make recovery and
migration simpler.

"Milly Staples [MVP - Outlook]" wrote:
 

How do you get rid of Getting startet

Posted: 29 Aug 2004 01:19 PM PDT

In article <phx.gbl>,
com says... 
Thank You

That was nice to get rid of.

Regards

Bjorn Kristensen

Installer Configuration Errors

Posted: 29 Aug 2004 07:48 AM PDT

Chris, Garfield, and all who find the same behaviour:

Methods 1&2 (registry changes etc) did not work as
discussed in:
http://support.microsoft.com/?kbid=265194 "OFF2000:
Windows Installer Appears Every Time a Program Is Started".

The only method I have found that will work is:

Method 3a Modified (Kenn:

I discovered this when Access was fixed using the third
method, but Winword and Excel still displyed
the "Installer applet" every time they were started.

NOTE: If the original installation was from a network
drive, you MUST disable the network interface or Office
2000 repeats the same mistake again and again!

Instead I:

Reinstalled Microsoft Access, AND Word AND Excel
(one at a time with reboot between each correction to make
sure registry was updated)
(and/or any other misbehaving office 2000 program)

To resolve this problem, rename the Msaccess.exe and
System.mdw files, and then reinstall Microsoft Access. To
do this, follow the steps for your computer's operating
system.

NOTE: By default, the Msaccess.exe file is installed in
the "C:\Program Files\Microsoft Office\Office10" folder,
and the System.mdw file is installed in the "C:\Program
Files\Common Files\SYSTEM" folder.

<<<< THIS WORKS

Method 3b: Reinstall Microsoft WinWord

To resolve this problem, rename the Winword.exe file to
OLD_Winword.exe, and then click on the Winword icon in the
START > PROGRAMS folder, this will kick off the install
procedure, you will be prompted to insert your original CD
and then it will correct the problem with Winword. To do
this, follow the steps for your computer's operating
system.

Method 3c: Reinstall Microsoft Excel

To resolve this problem, rename the Excel.exe file to
OLD_Excel.exe, and then click on the Excel icon in the
START > PROGRAMS folder, this will kick off the install
procedure, you will be prompted to insert your original CD
and then it will correct the problem with Excel.

================================================== ==
To do this, follow the steps for your computer's operating
system.


Microsoft Windows 98 or Microsoft Windows NT 4.0:
Quit all instances of Word, including Microsoft Outlook if
Word is selected as your e-mail editor.
Click Start, point to Find, and then click Files or
Folders.
In the Named box, type Msaccess.exe.
In the Look in box, select your local hard disk. (If you
are running Word from a network server, select an
alternate user template location.)
Click Find Now to search for the file.
For each occurrence of the Msaccess.exe file that appears
in the Find program, right-click the file. Click Rename on
the shortcut menu. Name the file a new name, such as
OldMsaccess.exe or Msaccess.exe-1.dot, and then press
ENTER.
Repeat steps 3 through 6 to rename the System.mdw file.
On the File menu, click Close to close the Find dialog
box.
Click Start, point to Programs, and then click Microsoft
Access. If you are prompted for the application CD-ROM,
insert the CD-ROM, and then click OK to continue the
application Setup.
After Setup finishes, start Microsoft Access.
On the File menu in Microsoft Access, click Exit to quit
Microsoft Access, and then start Microsoft Access again.

 
Windows Installer 
everytime 
Outlook 
a 
the 
well 
Install' 
information' 
not 

CANNOT SEND MAIL!!! - Microsoft Exchange

CANNOT SEND MAIL!!! - Microsoft Exchange

CANNOT SEND MAIL!!!

Posted: 28 Sep 2004 08:45 AM PDT

can you mail from any other email account(hotmail, yahoo) to that vendors
account. Just wanna be sure that its not that vendors email thats the
problem.
"Jeremy Manalang" <com> wrote in message
news:phx.gbl... 
to 
might 
their 
system 

Use POP3 and Exchange on the same machine

Posted: 28 Sep 2004 08:15 AM PDT

Mark, thanks for the reply.

I have a SBS2003 server (Exchange 2003 of course..). the domains all have MX
records forwarding mail to the server direcly (well, on an independant IIS
box before I installed this box...) The users were able to send and receive
e-mail directly to/from my server earlier. This is the functionality I need
to allow on this server as well. They will not need access to exchange nor do
I want them to log into my active directory. I just need the server to host
the pop3 accounts and to relay the SMTP.

"Mark Arnold [MVP]" wrote:
 

message archiving

Posted: 27 Sep 2004 10:44 PM PDT

Thanks the for the link. I tried it and set it up to archive on a public
folder that i created. I set it up to "always run" also. but i cannot see
the any items in the folder. do I have to do anything else? all your help
is appreciated. thanks.
-st
"Mark Arnold [MVP]" <org> wrote in message
news:com... 
http://support.microsoft.com/default.aspx?scid=kb;en-us;261173&Product=exch2k 
exchange 

spam relay is killing me

Posted: 27 Sep 2004 06:17 PM PDT

No prob - glad it's fixed. I suggest you disable authenticated relay anyway.

JV wrote: 

Cannot connect to two exchangr server simultaneously

Posted: 27 Sep 2004 02:27 PM PDT

Jan van Veldhuizen wrote: 

Yep - and it's a good thing, much better than multiposting - but some cranky
people might complain about somoene crossposting to more than, say, three
groups. Not that I'm one of them per se; just a little word to the wise. ;-)

 

IMCDATA\IN\ARCHIVE

Posted: 27 Sep 2004 05:20 AM PDT

that directory is logging information for the IMS, it's not actually required
for day to day operations. What is the Diagnostics Logging level on the IMS?
You need to turn it down from Medium (which is probably where it is) to None.

"Andy" wrote:
 

SMTP on MS EXCHANGE 2000 Server

Posted: 26 Sep 2004 02:35 PM PDT


"Umar Pirzada" <com> wrote in message
news:google.com... 

The pst is simply a personal folder. Basically you are configuring Outlook
as you would connecting to any ISP. To get smtp to properly relay, you will
need to open exchange system administrator and configure it to relay for
your internal addresses. This is done protocols > smtp > smtp virtual
server. Right click and look through the tabs until you find one with
relay restrictions. You will want to allow relay from your internal ip
range. If you have external users using this, you will want to make sure
that all authenticated users can relay and use smtp authentication on the
client. Be aware that pop and smtp authentication is in clear text.
Therefore, if there are sensitive resources that can be accessed remotely
using these credentials, I would not recommend this solution.
 
Subscribe to: Posts (Atom)