Pages

Search

Microsoft Word - Scrolling in Word 2013 Professional

Microsoft Word - Scrolling in Word 2013 Professional

Scrolling in Word 2013 Professional

Posted: 08 Feb 2015 01:27 PM PST

If I have an opened Word Document and I am trying to scroll vertically using the scroll thumb/scrollbox/scrolltab I cannot get fluid/continuous scrolling. However, when I use the scroll up, and scroll down arrows I get continuous scrolling. Is there a way to get continuous scrolling by clicking the scrolltab, and having the content in the document update automatically?

I cannot for the life of me find a solution to this enigma

jumping cursor

Posted: 08 Feb 2015 12:33 PM PST

I have Office 365, new in November. There is a black date and settings toolbar that floats in every few minutes. It causes me to stop typing, freezes whatever I am doing and makes the cursor jump. Then I spend an amount of time repairing the document because one sentence fragment is in a different sentence.

Word 2010 is making lists impossible...

Posted: 08 Feb 2015 11:58 AM PST

Hey everyone!
So I'm setting up my preferred list format for this new document, and Word is just making everything impossible. It "thinks" it knows the best indentation for the new list levels, and it does all kinds of ridiculous stuff with the text after the list starts. Check out the picture to see what I mean.

Is there any way to fix this? Its driving me crazy. Each new list level should have a steady, smooth indentation, and all text after the list starts should also have the same indentation. The text after a. and the empty circle is too close, and the text after i. is too far out.

Thanks for any help!

Cannot see all of the themes available in Word 2013

Posted: 08 Feb 2015 11:55 AM PST

I'm trying to complete an assignment for school that requires the Damask theme in work.  I go to the design tab and click on the themes drop down and see 9 themes.  A week ago, there were dozens that appeared when I did the very same operation.  I either need to know how to get all of those themes to show up again or where I can download that specific theme so that I can finish this project (note: I don't need a link to some giant list of themes to scroll through for an hour before I realize the theme I'm looking for doesn't exist in it- I want the direct download link for the Damask Word 2013 theme).

Any help would be greatly appreciated...

Unable to open word or any word documents

Posted: 08 Feb 2015 10:46 AM PST

I have just purchased and installed Microsoft office 365 to my laptop. I am unable to open the new word nor open any of my word documents from my USB as it says "Microsoft has stopped working" or "Microsoft is not responding". I have so much university work I need to complete and would really appreciate any help. Thank you. 

Does MS Word for Tablet have Grammar Checker?

Posted: 08 Feb 2015 07:47 AM PST

Here is MicroSoft's profile for the app on Google Play.

Does MicroSoft Word for Tablet use grammar and spell checker, such as the PC version?

I ask because while the current version of the description says it has the full MS Word program.  It fails to mention whether it has the grammar checker.

Thank you for sharing your Force;  May you ask the Goddess to alight your path.

Can't Add Dropbox to Word

Posted: 07 Feb 2015 11:39 PM PST

I'm using W8.1 and Word 2013 and have used the dropbox_service_add .bat file to add the service.

Dropbox now shows up in Word as an option to add from this Menu File/Account/Add a Service/Storage.  I can choose options Dropbox or Google Drive, etc, but both show this error message - 

"Sorry we're having server problems, so we can't add Dropbox right now"

There are many posts with this error message, but no solutions.

This doesn't work with other Office apps either and applies equally to Google Drive:

Cannot access on Windows 10 Technical Preview

Posted: 07 Feb 2015 11:26 PM PST

After downloading the windows 10 technical preview, some microsoft office files no longer load

I get the error box: http://prntscr.com/62g3t9

Any help for accessing downloaded files on microsoft office?

Its office 365 on a asus ultrabook, a few years old

Status bar at bottom of window in Word

Posted: 07 Feb 2015 10:33 PM PST

Greetings.

When I open a Word document in Office 2007, the status bar that normally appears at the bottom of the document window has vanished. This is the case for both new and old documents.

Can you tell me how I can get it back, please?

PLEADING PAPER

Posted: 07 Feb 2015 03:15 PM PST

Some law firms use this horrible Word 2010 program.  Do not like the Ribbon [which I find a horrible idea] because it takes too much time to get what needs to be done, done.  It takes me now 4-8 steps more than Word 2003 did with the tool bar that could be customized to get the job done quicker.  Now that I have to work with Word 2010, I find out that you CANNOT MAKE PLEADING PAPER OR EVEN MAKE A TEMPLATE PLEADING.  This is really bad for law firms.  In Word 2003 you could make Pleading paper, but you could NOT do standard double spacing because it would not be on the Line Numbers.  You had to monkey around with the spacing to even get the text of the pleading on the line numbers.  WHAT IS UP WITH THIS? 

On top of this issue is the fact that you cannot make pleading paper that is consistent wit 26 lines, but you cannot put 2 footers [one for page number, title of pleading] and [second, the law firm info] at all.

As for Microsoft's templates, they are useless.  You cannot customize them to fit your needs.

As far as I am concerned, your Microsoft people really need to make a product that would consider LAW FIRMS and be USER FRIENDLY [you could learn from WordPerfect].  Your products are mainly made for Corporate businesses that are basic in what they do and that is perfectly fine but it is totally inefficient for law firms.   

Yes, I am use to having "USER FRIENDLY" software such as WordPerfect to make pleading paper, which line spacing was actually on the Line Number without screwing around with the Line Spacing to have your text on the Line Number. 

rich text format

Posted: 07 Feb 2015 03:02 PM PST

I just downloaded the microsoft word app for tablets and i can"t figure out how to save a document in rich text format.  I need to be able to do this to share the file with my instructor for school.  Anyone know how to accomplish this task?

office pro 2007 trial over. full ver. key code invalid - Microsoft Office forums

office pro 2007 trial over. full ver. key code invalid - Microsoft Office forums

office pro 2007 trial over. full ver. key code invalid

Posted: 01 Aug 2008 11:21 AM PDT

Do you have a 25-character product key code for a
"Full Version" of Microsoft Office 2007 Professional"?

Or do you have an "OEM" or "Upgrade" product key?

--
Carey Frisch
Microsoft MVP
Windows Desktop Experience -
Windows Vista Enthusiast

---------------------------------------------------------------

"Michele" <microsoft.com> wrote in message news:com...
Already tried that but they want $49.00. We are not for profit. Cant pay $49
every time we have a question.

"Carey Frisch [MVP]" wrote:
 

Converting Trial Version to Licensed Version

Posted: 31 Jul 2008 08:18 AM PDT

Contact Microsoft support directly for help with your issue (no-charge):
https://support.microsoft.com/common/international.aspx?rdpath=1&gprid=8753

--
Carey Frisch
Microsoft MVP
Windows Desktop Experience -
Windows Vista Enthusiast

---------------------------------------------------------------

"happycaravanner" <microsoft.com> wrote in message
news:com...
Additional Information - The Microsoft Product Code for this package is
9QA-01757 - this is shown on the back of the package on the sticker which
says "THIS IS NOT A COA" - the actual Product Key Card is contained in a
sealed flap inside the package.

"Carey Frisch [MVP]" wrote:
 

Possible program transfer

Posted: 31 Jul 2008 07:29 AM PDT

Sirius wrote: 

No, it isn't. You'll need to use an application to find out what it is.
That said, if it was preinstalled on the old computer, the EULA says it
may not be moved to another computer. If all he needs is Word and
doesn't like Open Office's program, perhaps he would be happy with
AbiWord. Check it out at http://www.abisource.com/ It's free as air.

Alias 

want to transfer office 2007 product key from one computer to ano.

Posted: 30 Jul 2008 01:14 PM PDT



"Beha2002" <microsoft.com> wrote in message
news:com... 

If this is an OEM version (may have "for use on a new computer" or something
like that on the CD) you can only use it on the original computer it was
installed on. Only retail versions of software can be moved from computer
to computer. If it came on the original computer, it in all likelihood is
an OEM version also.

Microsoft Office Ultimate 07-reinstall

Posted: 30 Jul 2008 08:39 AM PDT

What happens when you try?

--

JoAnn Paules
MVP Microsoft [Publisher]
Tech Editor for "Microsoft Publisher 2007 For Dummies"


"Jenni" <microsoft.com> wrote in message
news:com... 

Trying to create a One Click Autorun DVD for Office 2007

Posted: 30 Jul 2008 06:43 AM PDT

try

setup.exe /config ?:\office2007\<product name>\config.xml

i.e. f:\software\office2007\setup.exe /config
f:\software\office2007\enterprise.ww\config.xml

and have you .msp file in ther updates directory




"booker@mgt" <gatech.edu> wrote in message
news:com... 

Problem with deploying Office 2007 using SMS2003 SP3

Posted: 30 Jul 2008 12:57 AM PDT

Actually is not any opened office application during the setup. Also only
one version of office installation on that machine.

Regard,
Hany Mansour.

"Bob Buckland ?:-)" <75214.226(At Beautiful Downtown)compuserve.com> wrote
in message news:%phx.gbl... 

MSO 2000 SB Disk 1 missing

Posted: 29 Jul 2008 08:59 PM PDT

NO RESPONSE - offer withdrawn

"LVTravel" <com> wrote in message
news:phx.gbl... 

email set-up

Posted: 29 Jul 2008 06:18 PM PDT

Control Panel->Mail Icon->Accounts. Remove the Exchange account (if you
don't have one, why did you select it?) and install your POP3 or IMAP
account.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact.
How to ask a question: http://support.microsoft.com/KB/555375


After furious head scratching, e asked:

| it's asking for microsoft exchange server, what do i put? also what
| email address should i use for my microsoft email account?

Activating Office 2007 US version in Spain

Posted: 29 Jul 2008 12:42 PM PDT

Thanks, I was a little surprised you couldn't use different language
versions. I don't need to eBay my Office then! :)

"Peter Foldes" wrote:
 

Installing sp1 slipstream or in conjunction with Office 2007 is it

Posted: 29 Jul 2008 09:32 AM PDT

Is therea default beyond alphabetical order. One of my techs asked if the
additional updates could be loaded during the install, i.e, the office
updates that occur after you install sp1.

I was not sure what would happen if an update was in the folder that needed
to wait on another update before it could be applied?

"Bob Buckland ?:-)" wrote:
 

Vista and Office Student 2007 Install Issues

Posted: 28 Jul 2008 05:51 PM PDT



"Doc Pirkle" wrote:
 

Office 2000 uninstall and reinstall.

Posted: 28 Jul 2008 02:56 PM PDT

Glad you got him running with OO.

"Jim" <microsoft.com> wrote in message
news:com... 

Contacts?

Posted: 28 Jul 2008 01:54 PM PDT


"Milly Staples [MVP - Outlook]" <what@ever> wrote in message
news:phx.gbl... 




Thanks! But will that duplicate any emails and other data that I've already
imported?






 

Help with Office 2000 Premium setup

Posted: 28 Jul 2008 07:09 AM PDT

I think it isn't a hard problem, but corrupt windows problem. Neither I think
is an Office problem. Shell try to format the HD and reinstall windows, will
see what happens.
Thank you for your help anyway.

"Mary Sauer" wrote:
 

Student and Teacher versions... what's the scoop?

Posted: 27 Jul 2008 07:18 PM PDT

Bob Buckland ?:-) wrote: 

Spain. Once the shrink wrap is opened, it's yours and no refund. One
does not get to see the EULA until one goes about installing it.

Alias 

Is there a global "Always show Full Menus" switch?

Posted: 27 Jul 2008 07:48 AM PDT

G'day "macropod" & all;

"macropod" <invalid> wrote in message
news:phx.gbl...
.... 
I would if I could. But there's no such option. You weren't very specific,
so I checked both Outlook and Word. Is there some other place I should be
checking...?

FWIW; I'm running Office 2003 on XP Media Center, SP3.

Dusty
 

Office 2007 Activated but programs still want Product Key

Posted: 27 Jul 2008 04:40 AM PDT

My my my. The wonders of running a Registry Cleaner. You did run a Registry Cleaning Tool before this issue showed up in the first place .. Did you not ?

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"Jim" <microsoft.com> wrote in message news:com... 

Office 2007 Plus running on Windows XP Pro 64bit

Posted: 26 Jul 2008 12:04 PM PDT


Hello Adam,

Thank you for your feedback.

I am so glad to know the information I provided are helpful for you. It's
been a pleasant experience working with you. I hope you were delighted with
the service we provided you.

If you need further assistance on this issue or encounter any new break/fix
issue, please feel free to post your questions in the newsgroups. We are
glad to be of assistance.

Best regards,

Steven Du
Microsoft Online Partner Support

Get Secure! - www.microsoft.com/security

================================================== ====
PLEASE NOTE: The partner online technical community are provided to assist
with break/fix issues and simple how to questions.

We also love to hear your product feedback! Let us know what you think by
posting

from the web interface: Partner Feedback
from your newsreader: microsoft.private.directaccess.partnerfeedback

We look forward to hearing from you!
================================================== ====
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from this issue.
================================================== ====
This posting is provided "AS IS" with no warranties, and confers no rights.
================================================== ====



--------------------
From: "Adam Raff" <nospam>
References: <phx.gbl>
<phx.gbl>
Subject: Re: Office 2007 Plus running on Windows XP Pro 64bit
Date: Mon, 28 Jul 2008 09:19:37 -0400


Steven,

Thanks for your hellp


"Steven Du [MSFT]" <microsoft.com> wrote in message
news:phx.gbl... 
issues 

Office 2003 setup will not load on my 2nd computer

Posted: 25 Jul 2008 10:36 AM PDT

DL... you are correct ! However, I get the same result with Setup.exe. It
will not load..... it won't even start the loading process.
Jeff

"JBacon" wrote:
 

how do i activate office 2007 if my product key doesn't work?

Posted: 25 Jul 2008 08:36 AM PDT


"Another Brian" <nocom> wrote in message
news:phx.gbl... 

Yeah---especially the "B" and "8".....That was my downfall. I'll never get
THAT hour back :-)......

Re-Downloading Office 2007

Posted: 24 Jul 2008 04:43 PM PDT

Did you have the product key to start with? Is Office 2007 on your computer and
did you activate it without issue?
If the above is true you can find your product key by running the Belarc
Advisor.
http://www.belarc.com/free_download.html
--
Mary Sauer MSFT MVP
http://office.microsoft.com/
http://msauer.mvps.org/
news://msnews.microsoft.com

"Clif45" <microsoft.com> wrote in message
news:com... 

I did something Stupid! 2007 office retail registration

Posted: 22 Jul 2008 04:13 PM PDT

On Jul 23, 12:13am, co.uk wrote: 

Peter,

Thanks for the reply but the retailer is not interested. Is there
another method? Could i use system restore as a last resort? i really
do not want to lose all my settings ect...

Thanks

categorizing Microsoft Project

categorizing Microsoft Project

categorizing

Posted: 12 Feb 2006 06:51 PM PST

Exactly what I was looking for. Thanks for the help

Best Use of Template File with Resources?

Posted: 12 Feb 2006 01:38 PM PST

Mike,
Your advice is reassuring. I will work with this in mind and keep you
posted.
John Hansen


"Mike Glen" <glenATmvps.org> wrote in message
news:phx.gbl... 

Newbie genearl PM question

Posted: 12 Feb 2006 06:35 AM PST

Understand exactly what you mean. Part of the issue is one which Project
cannot be expected to help with and that is simple management. There are
times when you have to simply manage the contractors. To help with this
though and where you have the concerns is scheduling which drive to do first
when four houses all come due at the same time.

First assign a deadline to the completion of each house. This will create
critical paths for you, and the slack between end of the house and preceeding
activities will differ from house to house. This is important as resource
levelling uses the slack values to 'decide' how to order conflicting
resources. Hence if you have three houses with driveways all able to be done
at the same time, but house 1 has the first deadline, house two the second
and house three the third deadline, then the slack between finishing the
house and the driveway being completed will differ from house to house.
Project will then level out the asphalting contractor's work based on the
slack available at each house, so it should schedukle House 1 first, house 2
second etc.

You may have other reasons to prioritise houses, in which case you can set
priorities of each task in the project and when levelling select to level by
Standard,Priority.

Using the levelling function on the critical resources will give you dates
that you can then give to your contractors and subject to no other changes
make those dates firm to them and simply follow up as normal to make sure
they are ready as advised previously.

Hiope this helps

Regards

DavidC

"Just Fun" wrote:
 

Report for Assigned Tasks

Posted: 11 Feb 2006 07:25 AM PST

Hi Brian,

I assume you have found the Who Does What Report and discovered the fact
that the report doesn't sort the assignments by Start Date.

The work around that I use as suggested by John is the resource usage view
with the Start and Finish date added to the table (left side) and then
sorted by Start date. I then hide the right side (timescaled portion) of
the view.

I hope this helps. Let us know how you get along.

Julie

"Brian Ross" <com> wrote in message
news:%phx.gbl... 

Provide Project templates which helps PRINCE2 beginners

Posted: 10 Feb 2006 08:27 PM PST

Hi,

I did a Google Search of the WEB and found this site:
http://www.ogc.gov.uk/prince2/downloads/template_case.htm
Is there anything there that might be useful to you?
John Hansen

"Osama Mokadmy from UNDP" <Osama Mokadmy from
microsoft.com> wrote in message
news:com... 

How do I insert a new task into an existing project?

Posted: 10 Feb 2006 04:11 PM PST

Do you have the project sorted or filtered? make sure the filter All Tasks
is displayed (shortcut for that is F3) and that you are sorted by ID
(Project, Sort menu).

Links and summary tasks should have no effect.

Can you insert into a new schedule?

--

Rod Gill
Project MVP
Visit www.msproject-systems.com for Project Companion Tools and more


"Jerry Richgels" <Jerry microsoft.com> wrote in message
news:com... 

Resources, resource types, vendors

Posted: 10 Feb 2006 01:57 PM PST

Hi MCraig,

It appears that you need a database rather than a timebased product as
Project is.

Would it not be better to set up an access database with all the data and
run relevant queries?

Regards
DavidC

"MCraig" wrote:
 

Why does my calendar always start on February 1998?

Posted: 10 Feb 2006 01:23 PM PST

You're welcome, Nick :-) I suggest you download the free SP2 from
Microsoft.

Mike Glen
MS Project MVP


nickbike wrote: 

Change Indent

Posted: 10 Feb 2006 12:23 PM PST

Hi bill,

This is what I do - not eactly what you ask for but it helps:
Tools-Options-View
Uncheck Indent Tasks
Check Show Outline Number

Try it..
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"Bill" <com> schreef in bericht
news:uw8DU$phx.gbl... 

General Information

Posted: 10 Feb 2006 11:17 AM PST

As for a very general overview, imo... MSProject allows a manager to
forcast events based on either previous experience or some other form
of input. All the stuff that goes through your head as a manager can
be entered and reports generated that allows you to view it and share
it and to pick it apart and refine it. Once the "plan" is made it can
be modified and tracked to figure out how well you created the plan in
the first place, and to adjust your forcasting abilities accordingly.
MSProject also allows you the ability through tracking to "prove" who's
fault certain discrepancies caused what differences in your timeline.
Project can simply help to get a rough idea of how long a small project
will take or can be a major undertaking for multitudes of managerial
types working on complex products, but the end result is only as good
as the data entered and the commitment to stay on top of it. Good
luck with your course.

Actual Work Protection

Posted: 10 Feb 2006 11:05 AM PST

Hi ,

Welcome to this Microsoft Project newsgroup :)

Not without password protection of the file.

FAQs, companion products and other useful Project information can be seen at
this web address: http://project.mvps.org/faqs.htm

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP

Lucky_guy2000 wrote: 

Can I create a project without dates, ie, day 1, day 2 etc?

Posted: 10 Feb 2006 10:43 AM PST

Hi Bill,

Welcome to this Microsoft Project newsgroup :)

The best that Project can offer is Tools/Options.../Date Format: and select
the format for week numbers.

FAQs, companion products and other useful Project information can be seen at
this web address: http://project.mvps.org/faqs.htm

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP

Bill wrote: 

Link Project data into Excel Worksheet

Posted: 10 Feb 2006 10:40 AM PST

You'll need another cell that converts the 20h or whatever into a value then
format that cell with custom format 0\h

use formula:
=VALUE(LEFT(A1,LEN(1)-1))
--

Rod Gill
Project MVP
Visit www.msproject-systems.com for Project Companion Tools and more


"Neil" <microsoft.com> wrote in message
news:com... 

Specific date range reporting

Posted: 10 Feb 2006 01:56 AM PST

Thanks DavidC, I think I was trying to overcomplicate things and this works a
treat!



"DavidC" wrote:
 

Microsoft CRM - CRM 1.2 Knowledge Base - Delay when Publishing Article

Microsoft CRM - CRM 1.2 Knowledge Base - Delay when Publishing Article

CRM 1.2 Knowledge Base - Delay when Publishing Article

Posted: 20 Sep 2005 11:13 AM PDT

As to your second point: It is true that the doentation is pretty weak.
There are a couple of good resources though. This newsgroup is one of the
best resources. Also check out the CRM SDK on MSDN, and the CRM resources on
technet
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/CrmSdk1_2/htm/v1d2microsoftcrmversion12sdk.asp

http://www.microsoft.com/technet/prodtechnol/mscrm/mscrm12/default.mspx

I hope you will also find some useful information on my blog, as well as
sites like www.mscrmexperts.com. Good luck.
--
Matt Wittemann
http://icu-mscrm.blogspot.com


"Donna Edwards" wrote:
 

CRM 3.0 ETA

Posted: 20 Sep 2005 09:19 AM PDT

As far as I have heard, the 3.0 Beta will be available in October to
partners, but the production version of 3.0 will not be released until
December to existing customers.
--
Matt Wittemann
http://icu-mscrm.blogspot.com


"John O'Donnell" wrote:
 

Reassign account type to user

Posted: 20 Sep 2005 09:19 AM PDT

Advanced Find is divided into two sections - top is search criteria, bottom
is your results. Just above your results set, there is a blue bar. Look to
this blue bar for the Actions you seek.

And don't feel alone....took me a couple of posts here to find this as well.

bondg


"Andrea" <microsoft.com> wrote in message
news:com... 

Contact Names Display

Posted: 20 Sep 2005 07:09 AM PDT

Hi Matt,

that appears to do the trick - thanks.

On a similar topic, is there any way to get fields into the Subject line of
an email ?

Ian

"MattNC" <microsoft.com> wrote in message
news:com... 
etc 
because 
your 

Some pick lists are not showing all of their pull down values.

Posted: 20 Sep 2005 06:57 AM PDT

If your users still want DPI settings higher than 96dpi, you can add/change a
registry value to get CRM to display correctly:

HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\UseHR = 0

If the value doesn't exist, create it as a DWORD

If you do this, other web sites may not look quite right, but you generally
don't lose information this way

"Dave Ireland" wrote:
 

Downgrade CRMAdmin AD Rights

Posted: 20 Sep 2005 05:45 AM PDT

You can lower the rights of the user in AD after the installation is
complete. The install needs tohe Domain Admin rights, afterwards, there is
no longer the need. The service accounts specified are granted the needed
AD rights over the OU during the install.

--

Matt Parks
MVP - Microsoft CRM


"SarahD" <microsoft.com> wrote in message
news:com...
Sorry this doesn't actually answer my question.

Are you saying that the CRM System Administrator in CRM must be tied to a
domain user in AD?

I really want a CRMAdmin user in CRM that's tied to the lowest AD rights
user that it needs so that our administrators on CRM can do as little damage
elsewhere on the network as possible.

I don't think I can do exactly as you say as I think the user the "expert
consultant" company used to install the software is what they now have tied
to CRMAdmin.

That doesn't actually worry me, I would just like to be lower the risk to
the network.

Thanks.

"Dave Ireland" wrote:
 
installation, 
CRM 
CRM. 
in 
(and 

Problem Installing Second CRM Web Server

Posted: 20 Sep 2005 05:21 AM PDT

Thanks Dave, I'll try that and they are definitely both on the same
domain and I'm logged in as a member of domain admins.

I'll let you know what happens.

Thanks,
Wayne

CRM Installation and Configuration Exam ? as personal in name?

Posted: 20 Sep 2005 01:21 AM PDT

Thanks Lukasz

"Lukasz Wysocki" wrote:
 

CRM acting as if the shift key is being held down

Posted: 19 Sep 2005 02:44 PM PDT

I understand. It is a strange one.

"John O'Donnell" wrote:
 

can't install crm on test server

Posted: 19 Sep 2005 01:45 PM PDT

Hi Gordon;

The good news is that you have found the problem, the bad news is that it
means you have network configuration problems (likely DNS). I'm not a
network specialist by any stretch - do you have any resources internally
that can help you troubleshoot this? or maybe someone else from this NG has
some ideas?

Dave


"Gordon Summer" <microsoft.com> wrote in message
news:com... 

duplicated records

Posted: 19 Sep 2005 01:41 PM PDT

We have experienced the same thing. A user went offline and all of his
contacts were downloaded again creating 3000 duplicate records in his
Outlook. He has gone offline/online many times without a problem. The data
was not reloaded on the CRM server so the GUIDs have not changed. I am
looking for a reason and a solution as well.

"tkomarek" wrote:
 

ActiveX component can´t create o

Posted: 19 Sep 2005 12:06 PM PDT

Com add-ins get loaded because there are instructions in the user's registry
[HKCU] or the computer's registry [HKLM]. In the case of the SFO client, it
should be in the [HKCU] hive.

Did you restore the user's registry settings to the new PC?

check the following location in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Office\Outloo k\Addins

If you find an entry for the crmaddin then, that is what is causing Outlook
to try and instantiate the object.

Dave Ireland



"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 

Convert Accounts to Leads

Posted: 19 Sep 2005 08:27 AM PDT

And there's not a way to export accounts to a excel file for example?

Like this I could import it to leads.

Thanks,
Hugo

"Brandon" wrote:
 

problem with installing CRM 1.02 on windows 2003 service pack 1

Posted: 18 Sep 2005 04:55 AM PDT

Dear Yair,

The Microsoft CRM Security Service might fail to start when the computer is
restarted. This occurs because during the startup sequence, the Microsoft CRM
Security Service might attempt to start before the SQL Server service (the
name of default SQL server instance is MSSQLSERVER). The result is an error
message stating that a service failed to start.

You can re-register the Microsoft CRM Security service as a dependent
service on the SQL Service by using the following command at a command prompt.

mscrmsecurityservice.exe -r -s

The other issue you are encountering probably is because the website is not
part of the trusted pages. If you add the website to the trusted pages
(internet explorer -> Extra -> Internet Option -> Security -> Trusted Sites
-> Sites -> add), then this should work. Alternatively you can set the
security to autologon with the current username and password.

Hope this helps,

Ronald Lemmen
Avanade Netherlands


"Yair Etziony" wrote:
 

Contact Assignment

Posted: 17 Sep 2005 12:49 AM PDT

Hi,

When assigning an account to another person, the account automatically gets
shared to the previous owner. This is by design. As far as I know, you cannot
change this.

With kind regards,

Ronald Lemmen
Avanade Netherlands

"Sameer" wrote:
 

Lead Field Values not available in Account

Posted: 16 Sep 2005 11:57 AM PDT

An Excel sheet listing the values (from Lead) is definitely the way to
go. When you go to sync them up (in Account), you can get pretty fast
with keyboard shortcuts (CTRL/C to copy the excel text value, ALT/TAB
to go into the CRM Customization screen for that field in Account,
CTRL/P to paste, enter to save, etc.) It's not TOO horrible....
HTH,

Dave

-------------------------------------------------
David L. Carr, President
Visionary Software Consulting, Inc.
Main #: 971-327-6944

To download a fully functional trial version of VAST, (Visionary Audit
System Tools for Microsoft CRM), that tracks all changes made to the
Adventure Works Cycle database, visit http://www.vscrm.com/trial.htm

Reminders in CRM

Posted: 16 Sep 2005 11:39 AM PDT

Yes,
If you use Sales for Outlook, you will get a reminder pop up!
Regards

Fred

Error Opening Forms After adding New Field

Posted: 16 Sep 2005 03:43 AM PDT

Did you happen to backup your customization XML before publishing the
changes? (In Deployment Manager you can export customizations to an XML
file.) If you have this file, I would try to import it back in to set
everything back. This won't remove the new field from the schema, but it will
set your forms back to where they were.

Also, just to be clear, because I didn't see it in the previous posts, have
you issued the iisreset command from the command prompt on the CRM server?
This is necessary in order to publish customizations.
--
Matt Wittemann
http://icu-mscrm.blogspot.com


"ril" wrote:
 

Workflow - Multiple Conditions Question

Posted: 16 Sep 2005 01:00 AM PDT

Cheers, Dave - much appreciated - Now, where did I put that case of
Pinot............!

Cozy


"Dave Carr (dave- no com" <com> wrote in message
news:googlegroups.com... 

MS CRM 3.0 vs 1.2

Posted: 16 Sep 2005 01:00 AM PDT


The key word in my post was "specific." Our co. chose MSCRM based on the
"big picture" of 1.2, and it is all of the little things that make the
service module, IMHO, unusable. Having to change the FROM address on every
outgoing email to the queue, for example, is a little thing, but 20 little
things like this add up to frustration, more time to complete tasks, etc.


"Matt Parks" wrote:
 

Unable to access Home page

Posted: 15 Sep 2005 06:27 PM PDT

Thanks I am going to try this.
Stefano

"bondg" <bondg_AT_stcsc.edu> wrote in message
news:phx.gbl... 

How To Import Accounts

Posted: 15 Sep 2005 04:02 PM PDT

you can import them as leads.
try "tools -> import -> leads".
specify the fields you want to transfer and convert the leads to accounts.

hope this can help you.

"Matt Parks" wrote:
 

Access to Crm from Crm Server

Posted: 15 Sep 2005 08:30 AM PDT

I haven't any cache to cancel because the client dns service isn't running. I
want the server use only dns server service.

Any other idea?



"MattNC" wrote:
 
Subscribe to: Posts (Atom)